summaryrefslogtreecommitdiff
path: root/boards/osmo-sdr
diff options
context:
space:
mode:
Diffstat (limited to 'boards/osmo-sdr')
-rw-r--r--boards/osmo-sdr/board_lowlevel.c208
1 files changed, 208 insertions, 0 deletions
diff --git a/boards/osmo-sdr/board_lowlevel.c b/boards/osmo-sdr/board_lowlevel.c
new file mode 100644
index 0000000..823d3d0
--- /dev/null
+++ b/boards/osmo-sdr/board_lowlevel.c
@@ -0,0 +1,208 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+/// \unit
+///
+/// !Purpose
+///
+/// Provides the low-level initialization function that gets called on chip
+/// startup.
+///
+/// !Usage
+///
+/// LowLevelInit() is called in #board_cstartup_xxx.c#.
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#include "board.h"
+#include "board_memories.h"
+#include "board_lowlevel.h"
+#include <pio/pio.h>
+
+//------------------------------------------------------------------------------
+// Local definitions
+//------------------------------------------------------------------------------
+#define AT91C_CKGR_MUL_SHIFT 16
+#define AT91C_CKGR_OUT_SHIFT 14
+#define AT91C_CKGR_PLLCOUNT_SHIFT 8
+#define AT91C_CKGR_DIV_SHIFT 0
+
+#if (BOARD_MCK == 48000000)
+// Settings at 48/48MHz
+#define BOARD_OSCOUNT (AT91C_CKGR_MOSCXTST & (0x8 << 8))
+#define BOARD_PLLR ((1 << 29) | (0x7 << AT91C_CKGR_MUL_SHIFT) \
+ | (0x0 << AT91C_CKGR_OUT_SHIFT) |(0x1 << AT91C_CKGR_PLLCOUNT_SHIFT) \
+ | (0x1 << AT91C_CKGR_DIV_SHIFT))
+#define BOARD_MCKR ( AT91C_PMC_PRES_CLK_2 | AT91C_PMC_CSS_PLLA_CLK)
+#elif (BOARD_MCK == 96000000)
+// Settings at 96/96MHz
+#define BOARD_OSCOUNT (AT91C_CKGR_MOSCXTST & (0x8 << 8))
+#define BOARD_PLLR ((1 << 29) | (0x7 << AT91C_CKGR_MUL_SHIFT) \
+ | (0x0 << AT91C_CKGR_OUT_SHIFT) |(0x1 << AT91C_CKGR_PLLCOUNT_SHIFT) \
+ | (0x1 << AT91C_CKGR_DIV_SHIFT))
+#define BOARD_MCKR ( AT91C_PMC_PRES_CLK | AT91C_PMC_CSS_PLLA_CLK)
+#else
+ #error "No matched BOARD_MCK."
+#endif
+
+// Define clock timeout
+#define CLOCK_TIMEOUT 0xFFFFFFFF
+
+//------------------------------------------------------------------------------
+// Local variables
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+// Local functions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+// Exported functions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// After POR, at91sam3u device is running on 4MHz internal RC
+/// At the end of the LowLevelInit procedure MCK = 48MHz PLLA = 96 CPU=48MHz
+/// Performs the low-level initialization of the chip. This includes EFC, master
+/// clock, IRQ & watchdog configuration.
+//------------------------------------------------------------------------------
+void LowLevelInit(void)
+{
+ unsigned int timeout = 0;
+
+ /* Set 2 WS for Embedded Flash Access
+ ************************************/
+ AT91C_BASE_EFC0->EFC_FMR = AT91C_EFC_FWS_2WS;
+#if defined(AT91C_BASE_EFC1)
+ AT91C_BASE_EFC1->EFC_FMR = AT91C_EFC_FWS_2WS;
+#endif
+ /* Watchdog initialization
+ *************************/
+ AT91C_BASE_WDTC->WDTC_WDMR = AT91C_WDTC_WDDIS;
+
+ /* Initialize main oscillator
+ ****************************/
+ if(!(AT91C_BASE_PMC->PMC_MOR & AT91C_CKGR_MOSCSEL))
+ {
+
+ AT91C_BASE_PMC->PMC_MOR = (0x37 << 16) | BOARD_OSCOUNT | AT91C_CKGR_MOSCRCEN | AT91C_CKGR_MOSCXTEN;
+ timeout = 0;
+ while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCXTS) && (timeout++ < CLOCK_TIMEOUT));
+
+ }
+
+ /* Switch to 3-20MHz Xtal oscillator */
+ AT91C_BASE_PMC->PMC_MOR = (0x37 << 16) | BOARD_OSCOUNT | AT91C_CKGR_MOSCRCEN | AT91C_CKGR_MOSCXTEN | AT91C_CKGR_MOSCSEL;
+ timeout = 0;
+ while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCSELS) && (timeout++ < CLOCK_TIMEOUT));
+ AT91C_BASE_PMC->PMC_MCKR = (AT91C_BASE_PMC->PMC_MCKR & ~AT91C_PMC_CSS) | AT91C_PMC_CSS_MAIN_CLK;
+ timeout = 0;
+ while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) && (timeout++ < CLOCK_TIMEOUT));
+
+ /* Initialize PLLA */
+ AT91C_BASE_PMC->PMC_PLLAR = BOARD_PLLR;
+ timeout = 0;
+ while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCKA) && (timeout++ < CLOCK_TIMEOUT));
+
+ /* Initialize UTMI for USB usage, can be disabled if not using USB for the sake of saving power*/
+ AT91C_BASE_CKGR->CKGR_UCKR |= (AT91C_CKGR_UPLLCOUNT & (3 << 20)) | AT91C_CKGR_UPLLEN;
+ timeout = 0;
+ while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCKU) && (timeout++ < CLOCK_TIMEOUT));
+
+ /* Switch to fast clock
+ **********************/
+ AT91C_BASE_PMC->PMC_MCKR = (BOARD_MCKR & ~AT91C_PMC_CSS) | AT91C_PMC_CSS_MAIN_CLK;
+ timeout = 0;
+ while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) && (timeout++ < CLOCK_TIMEOUT));
+
+ AT91C_BASE_PMC->PMC_MCKR = BOARD_MCKR;
+ timeout = 0;
+ while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) && (timeout++ < CLOCK_TIMEOUT));
+
+ /* Enable clock for UART
+ ************************/
+ AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_DBGU);
+
+ /* Optimize CPU setting for speed, for engineering samples only */
+ SetDefaultMaster(1);
+}
+
+//------------------------------------------------------------------------------
+/// Enable or disable default master access
+/// \param enalbe 1 enable defaultMaster settings, 0 disable it.
+//------------------------------------------------------------------------------
+void SetDefaultMaster(unsigned char enable)
+{
+ AT91PS_HMATRIX2 pMatrix = AT91C_BASE_MATRIX;
+
+ // Set default master
+ if (enable == 1) {
+
+ // Set default master: SRAM0 -> Cortex-M3 System
+ pMatrix->HMATRIX2_SCFG0 |= AT91C_MATRIX_FIXED_DEFMSTR_SCFG0_ARMS |
+ AT91C_MATRIX_DEFMSTR_TYPE_FIXED_DEFMSTR;
+
+ // Set default master: SRAM1 -> Cortex-M3 System
+ pMatrix->HMATRIX2_SCFG1 |= AT91C_MATRIX_FIXED_DEFMSTR_SCFG1_ARMS |
+ AT91C_MATRIX_DEFMSTR_TYPE_FIXED_DEFMSTR;
+
+ // Set default master: Internal flash0 -> Cortex-M3 Instruction/Data
+ pMatrix->HMATRIX2_SCFG3 |= AT91C_MATRIX_FIXED_DEFMSTR_SCFG3_ARMC |
+ AT91C_MATRIX_DEFMSTR_TYPE_FIXED_DEFMSTR;
+ } else {
+
+ // Clear default master: SRAM0 -> Cortex-M3 System
+ pMatrix->HMATRIX2_SCFG0 &= (~AT91C_MATRIX_DEFMSTR_TYPE);
+
+ // Clear default master: SRAM1 -> Cortex-M3 System
+ pMatrix->HMATRIX2_SCFG1 &= (~AT91C_MATRIX_DEFMSTR_TYPE);
+
+ // Clear default master: Internal flash0 -> Cortex-M3 Instruction/Data
+ pMatrix->HMATRIX2_SCFG3 &= (~AT91C_MATRIX_DEFMSTR_TYPE);
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Set flash wait state
+/// \param ws Value of flash wait state
+//------------------------------------------------------------------------------
+void SetFlashWaitState(unsigned char ws)
+{
+ // Set Wait State for Embedded Flash Access
+ AT91C_BASE_EFC0->EFC_FMR = ((ws << 8) & AT91C_EFC_FWS);
+
+#if defined(AT91C_BASE_EFC1)
+ AT91C_BASE_EFC1->EFC_FMR = ((ws << 8) & AT91C_EFC_FWS);
+#endif
+}
+
personal git repositories of Harald Welte. Your mileage may vary