From 044ad7c3987460ede48ff27afd6bdb0ca05a0432 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 4 Jul 2011 20:52:54 +0200 Subject: import at91lib from at91lib_20100901_softpack_1_9_v_1_0_svn_v15011 it's sad to see that atmel doesn't publish their svn repo or has a centralized location or even puts proper version/release info into the library itself --- peripherals/dma/dma.c | 393 ++++++++++++++++++++++++++++++++++++++++++++++++ peripherals/dma/dma.dir | 37 +++++ peripherals/dma/dma.h | 190 +++++++++++++++++++++++ 3 files changed, 620 insertions(+) create mode 100644 peripherals/dma/dma.c create mode 100644 peripherals/dma/dma.dir create mode 100644 peripherals/dma/dma.h (limited to 'peripherals/dma') diff --git a/peripherals/dma/dma.c b/peripherals/dma/dma.c new file mode 100644 index 0000000..cfae3dc --- /dev/null +++ b/peripherals/dma/dma.c @@ -0,0 +1,393 @@ +/* ---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support + * ---------------------------------------------------------------------------- + * Copyright (c) 2008, Atmel Corporation + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the disclaimer below. + * + * Atmel's name may not be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * ---------------------------------------------------------------------------- + */ + +//------------------------------------------------------------------------------ +// Headers +//------------------------------------------------------------------------------ + +#include "dma.h" +#include +#include + +//------------------------------------------------------------------------------ +// Global functions +//------------------------------------------------------------------------------ + +//------------------------------------------------------------------------------ +/// Configure a DMAC peripheral +//------------------------------------------------------------------------------ +void DMA_Config(unsigned int flag) +{ + AT91C_BASE_HDMA->HDMA_GCFG = flag; +} + +//------------------------------------------------------------------------------ +/// Enables a DMAC peripheral +//------------------------------------------------------------------------------ +void DMA_Enable(void) +{ + AT91C_BASE_HDMA->HDMA_EN = AT91C_HDMA_ENABLE; +} + +//------------------------------------------------------------------------------ +/// Disables DMAC peripheral +//------------------------------------------------------------------------------ +void DMA_Disable(void) +{ + AT91C_BASE_HDMA->HDMA_EN = ~(unsigned int)AT91C_HDMA_ENABLE; +} + +//----------------------------------------------------------------------------- +/// Enable DMA interrupt +/// \param flag IT to be enabled +//----------------------------------------------------------------------------- +void DMA_EnableIt (unsigned int flag) +{ + AT91C_BASE_HDMA->HDMA_EBCIER = flag; +} + +//----------------------------------------------------------------------------- +/// Disable DMA interrupt +/// \param flag IT to be enabled +//----------------------------------------------------------------------------- +void DMA_DisableIt (unsigned int flag) +{ + AT91C_BASE_HDMA->HDMA_EBCIDR = flag; +} + +//----------------------------------------------------------------------------- +/// Return DMA Interrupt Status +//----------------------------------------------------------------------------- +unsigned int DMA_GetStatus(void) +{ + return (AT91C_BASE_HDMA->HDMA_EBCISR); +} + +//----------------------------------------------------------------------------- +/// Return DMA Interrupt Mask Status +//----------------------------------------------------------------------------- +unsigned int DMA_GetInterruptMask(void) +{ + return (AT91C_BASE_HDMA->HDMA_EBCIMR); +} + +//----------------------------------------------------------------------------- +/// Returns the current status register of the given DMA peripheral, but +/// masking interrupt sources which are not currently enabled. +//----------------------------------------------------------------------------- +unsigned int DMA_GetMaskedStatus(void) +{ + unsigned int status; + status = AT91C_BASE_HDMA->HDMA_EBCISR; + status &= AT91C_BASE_HDMA->HDMA_EBCIMR; + return status; +} + +//------------------------------------------------------------------------------ +/// Enables DMAC channel +/// \param channel Particular channel number. +//------------------------------------------------------------------------------ +void DMA_EnableChannel(unsigned int channel) +{ + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + AT91C_BASE_HDMA->HDMA_CHER |= DMA_ENA << channel; +} +void DMA_EnableChannels(unsigned int bmChannels) +{ + AT91C_BASE_HDMA->HDMA_CHER = bmChannels; +} + +//------------------------------------------------------------------------------ +/// Disables a DMAC channel +/// \param channel Particular channel number. +//------------------------------------------------------------------------------ +void DMA_DisableChannel(unsigned int channel) +{ + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + AT91C_BASE_HDMA->HDMA_CHDR |= DMA_DIS << channel; +} +void DMA_DisableChannels(unsigned int bmChannels) +{ + AT91C_BASE_HDMA->HDMA_CHDR = bmChannels; +} + +//------------------------------------------------------------------------------ +/// Resume DMAC channel from an stall state. +/// \param channel Particular channel number. +//------------------------------------------------------------------------------ +void DMA_KeeponChannel(unsigned int channel) +{ + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + AT91C_BASE_HDMA->HDMA_CHER |= DMA_KEEPON << channel; +} + +//------------------------------------------------------------------------------ +/// Clear automatic mode for multi-buffer transfer. +/// \param channel Particular channel number. +//------------------------------------------------------------------------------ +void DMA_ClearAutoMode(unsigned int channel) +{ + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLB &= 0x7FFFFFFF; +} + +//------------------------------------------------------------------------------ +/// Return DMAC channel status +//------------------------------------------------------------------------------ +unsigned int DMA_GetChannelStatus(void) +{ + return( AT91C_BASE_HDMA->HDMA_CHSR); +} + +//----------------------------------------------------------------------------- +/// Set DMA source address used by a HDMA channel. +/// \param channel Particular channel number. +/// \param sources sources address. +//----------------------------------------------------------------------------- +void DMA_SetSourceAddr(unsigned char channel, unsigned int address) +{ + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_SADDR = address; +} + +//----------------------------------------------------------------------------- +/// Set DMA destination address used by a HDMA channel. +/// \param channel Particular channel number. +/// \param sources destination address. +//----------------------------------------------------------------------------- +void DMA_SetDestinationAddr(unsigned char channel, unsigned int address) +{ + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_DADDR = address; +} + +//----------------------------------------------------------------------------- +/// Set DMA descriptor address used by a HDMA channel. +/// \param channel Particular channel number. +/// \param sources destination address. +//----------------------------------------------------------------------------- +void DMA_SetDescriptorAddr(unsigned char channel, unsigned int address) +{ + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_DSCR = address ; +} + + +//----------------------------------------------------------------------------- +/// Set DMA control A register used by a HDMA channel. +/// \param channel Particular channel number. +/// \param size Dma transfer size in byte. +/// \param sourceWidth Single transfer width for source. +/// \param destWidth Single transfer width for destination. +/// \param done Transfer done field. +//----------------------------------------------------------------------------- +void DMA_SetSourceBufferSize(unsigned char channel, + unsigned int size, + unsigned char sourceWidth, + unsigned char destWidth, + unsigned char done) +{ + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + ASSERT(sourceWidth < 4, "width does not support"); + ASSERT(destWidth < 4, "width does not support"); + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLA = (size | + sourceWidth << 24 | + destWidth << 28 | + done << 31); +} + +//----------------------------------------------------------------------------- +/// Set DMA transfer mode for source used by a HDMA channel. +/// \param channel Particular channel number. +/// \param transferMode Transfer buffer mode (single, LLI, reload or contiguous) +/// \param addressingType Type of addrassing mode +/// 0 : incrementing, 1: decrementing, 2: fixed. +//----------------------------------------------------------------------------- +void DMA_SetSourceBufferMode(unsigned char channel, + unsigned char transferMode, + unsigned char addressingType) +{ + unsigned int value; + + ASSERT(channel < DMA_CHANNEL_NUM, "channel %d does not exist", channel); + + value = AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLB; + value &= ~ (AT91C_SRC_DSCR | AT91C_SRC_INCR | 1<<31); + switch(transferMode){ + case DMA_TRANSFER_SINGLE: + value |= AT91C_SRC_DSCR | addressingType << 24; + break; + case DMA_TRANSFER_LLI: + value |= addressingType << 24; + break; + case DMA_TRANSFER_RELOAD: + case DMA_TRANSFER_CONTIGUOUS: + value |= AT91C_SRC_DSCR | addressingType << 24 | 1<<31; + break; + } + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLB = value; + + if(transferMode == DMA_TRANSFER_RELOAD || transferMode == DMA_TRANSFER_CONTIGUOUS){ + value = AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CFG; + #if defined(AT91C_SRC_REP) + value &= ~(unsigned int)AT91C_SRC_REP; + // When automatic mode is activated, the source address and the control register are reloaded from previous transfer. + if(transferMode == DMA_TRANSFER_RELOAD) { + value |= AT91C_SRC_REP; + } + #endif + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CFG = value; + } + else { + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CFG = 0; + } +} + +//----------------------------------------------------------------------------- +/// Set DMA transfer mode for destination used by a HDMA channel. +/// \param channel Particular channel number. +/// \param transferMode Transfer buffer mode (single, LLI, reload or contiguous) +/// \param addressingType Type of addrassing mode +/// 0 : incrementing, 1: decrementing, 2: fixed. +//----------------------------------------------------------------------------- +void DMA_SetDestBufferMode(unsigned char channel, + unsigned char transferMode, + unsigned char addressingType) +{ + unsigned int value; + + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + + value = AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLB; + value &= ~(unsigned int)(AT91C_DST_DSCR | AT91C_DST_INCR); + + switch(transferMode){ + case DMA_TRANSFER_SINGLE: + case DMA_TRANSFER_RELOAD: + case DMA_TRANSFER_CONTIGUOUS: + value |= AT91C_DST_DSCR | addressingType << 28; + break; + case DMA_TRANSFER_LLI: + value |= addressingType << 28; + break; + } + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLB = value; + if(transferMode == DMA_TRANSFER_RELOAD || transferMode == DMA_TRANSFER_CONTIGUOUS){ + value = AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CFG; + #if defined(AT91C_DST_REP) + value &= ~(unsigned int)AT91C_DST_REP; + // When automatic mode is activated, the source address and the control register are reloaded from previous transfer. + if(transferMode == DMA_TRANSFER_RELOAD) { + value |= AT91C_DST_REP; + } + #endif + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CFG = value; + } + else { + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CFG = 0; + } +} + +//------------------------------------------------------------------------------ +/// Set DMA configuration registe used by a HDMA channel. +/// \param channel Particular channel number. +/// \param value configuration value. +//------------------------------------------------------------------------------ +void DMA_SetConfiguration(unsigned char channel, unsigned int value) +{ + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CFG = value; +} + +#if defined(AT91C_SRC_PIP) +//------------------------------------------------------------------------------ +/// Set DMA source PIP configuration used by a HDMA channel. +/// \param channel Particular channel number. +/// \param pipHole stop on done mode. +/// \param pipBoundary lock mode. +//------------------------------------------------------------------------------ +void DMA_SPIPconfiguration(unsigned char channel, + unsigned int pipHole, + unsigned int pipBoundary) + +{ + unsigned int value; + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + value = AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLB; + value &= ~(unsigned int)AT91C_SRC_PIP; + value |= AT91C_SRC_PIP; + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLB = value; + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_SPIP = (pipHole + 1) | pipBoundary <<16; +} +#endif + +#if defined(AT91C_DST_PIP) +//------------------------------------------------------------------------------ +/// Set DMA destination PIP configuration used by a HDMA channel. +/// \param channel Particular channel number. +/// \param pipHole stop on done mode. +/// \param pipBoundary lock mode. +//------------------------------------------------------------------------------ +void DMA_DPIPconfiguration(unsigned char channel, + unsigned int pipHole, + unsigned int pipBoundary) + +{ + unsigned int value; + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + value = AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLB; + value &= ~(unsigned int)AT91C_DST_PIP; + value |= AT91C_DST_PIP; + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLB = value; + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_DPIP = (pipHole + 1) | pipBoundary <<16; +} +#endif + +//----------------------------------------------------------------------------- +/// Set DMA control B register Flow control bit field. +/// \param channel Particular channel number. +/// \param size Dma transfer size in byte. +/// \param sourceWidth Single transfer width for source. +/// \param destWidth Single transfer width for destination. +/// \param done Transfer done field. +//----------------------------------------------------------------------------- +void DMA_SetFlowControl(unsigned char channel, + unsigned int flow) +{ + unsigned int value; + + ASSERT(channel < DMA_CHANNEL_NUM, "this channel does not exist"); + ASSERT(flow < 4, "flow control does not support"); + + value = AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLB; + value &= ~(unsigned int)AT91C_FC; + value |= flow << 21; + AT91C_BASE_HDMA->HDMA_CH[channel].HDMA_CTRLB = value; +} + diff --git a/peripherals/dma/dma.dir b/peripherals/dma/dma.dir new file mode 100644 index 0000000..af77f27 --- /dev/null +++ b/peripherals/dma/dma.dir @@ -0,0 +1,37 @@ +/* ---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support + * ---------------------------------------------------------------------------- + * Copyright (c) 2008, Atmel Corporation + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the disclaimer below. + * + * Atmel's name may not be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * ---------------------------------------------------------------------------- + */ + +//------------------------------------------------------------------------------ +/// \dir +/// +/// !!!Purpose +/// +/// Contains the peripheral API for the DMA controller (DMAC). +//------------------------------------------------------------------------------ + diff --git a/peripherals/dma/dma.h b/peripherals/dma/dma.h new file mode 100644 index 0000000..dbf50b9 --- /dev/null +++ b/peripherals/dma/dma.h @@ -0,0 +1,190 @@ +/* ---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support - ROUSSET - + * ---------------------------------------------------------------------------- + * Copyright (c) 2006, Atmel Corporation + + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the disclaiimer below. + * + * - Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the disclaimer below in the documentation and/or + * other materials provided with the distribution. + * + * Atmel's name may not be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * ---------------------------------------------------------------------------- + */ + +//------------------------------------------------------------------------------ +/// \dir +/// !Purpose +/// +/// Interface for configuration the %DMA controller(DMAC). +/// +/// !Usage +/// +/// -# Enable or disable the a DMAC controller with +/// DMA_Enable() and or DMA_Disable(). +/// -# Enable or disable %Dma interrupt using DMA_EnableIt() +/// or DMA_DisableIt(). +/// -# Get %Dma interrupt status by DMA_GetStatus(). +/// -# Enable or disable specified %Dma channel with +/// DMA_EnableChannel() or DMA_DisableChannel(). +/// -# Get %Dma channel status by DMA_GetChannelStatus(). +/// -# Configure source and/or destination start address with +/// DMA_SetSourceAddr() and/or DMA_SetDestAddr(). +/// -# Set %Dma descriptor address using DMA_SetDescriptorAddr(). +/// -# Set source transfer buffer size with DMA_SetSourceBufferSize(). +/// -# Configure source and/or destination transfer mode with +/// DMA_SetSourceBufferMode() and/or DMA_SetDestBufferMode(). +/// -# Configure source and/or destination Picture-In-Picutre +/// mode with DMA_SPIPconfiguration() and/or DMA_DPIPconfiguration(). +//------------------------------------------------------------------------------ + +#ifndef DMA_H +#define DMA_H + +#include + +//------------------------------------------------------------------------------ +// Definitions +//------------------------------------------------------------------------------ +#define DMA_CHANNEL_0 0 +#define DMA_CHANNEL_1 1 +#define DMA_CHANNEL_2 2 +#define DMA_CHANNEL_3 3 +#define DMA_CHANNEL_4 4 +#define DMA_CHANNEL_5 5 +#define DMA_CHANNEL_6 6 +#define DMA_CHANNEL_7 7 + +#if defined(CHIP_DMA_CHANNEL_NUM) +#define DMA_CHANNEL_NUM CHIP_DMA_CHANNEL_NUM +#endif + +#define DMA_TRANSFER_SINGLE 0 +#define DMA_TRANSFER_LLI 1 +#define DMA_TRANSFER_RELOAD 2 +#define DMA_TRANSFER_CONTIGUOUS 3 + + +#define DMA_ENA (1 << 0) +#define DMA_DIS (1 << 0) +#define DMA_SUSP (1 << 8) +#define DMA_KEEPON (1 << 24) + +#define DMA_BTC (1 << 0) +#define DMA_CBTC (1 << 8) +#define DMA_ERR (1 << 16) + +#ifdef AT91C_HDMA_SRC_DSCR + #define AT91C_SRC_DSCR AT91C_HDMA_SRC_DSCR + #define AT91C_DST_DSCR AT91C_HDMA_DST_DSCR + #define AT91C_SRC_INCR AT91C_HDMA_SRC_ADDRESS_MODE + #define AT91C_DST_INCR AT91C_HDMA_DST_ADDRESS_MODE + #define AT91C_SRC_PER AT91C_HDMA_SRC_PER + #define AT91C_DST_PER AT91C_HDMA_DST_PER +#if defined(AT91C_HDMA_SRC_REP) + #define AT91C_SRC_REP AT91C_HDMA_SRC_REP +#endif +#if defined(AT91C_HDMA_DST_REP) + #define AT91C_DST_REP AT91C_HDMA_DST_REP +#endif +#if defined(AT91C_HDMA_SRC_PIP) + #define AT91C_SRC_PIP AT91C_HDMA_SRC_PIP +#endif +#if defined(AT91C_HDMA_DST_PIP) + #define AT91C_DST_PIP AT91C_HDMA_DST_PIP +#endif + #define AT91C_FC AT91C_HDMA_FC + + #define AT91C_BTC (0xFF << 0) + #define AT91C_CBTC (0xFF << 8) + #define AT91C_ERR (0xFF << 16) +#endif + +//------------------------------------------------------------------------------ +// Exported functions +//------------------------------------------------------------------------------ + +extern void DMA_Config(unsigned int flag); + +extern void DMA_Enable(void); + +extern void DMA_Disable(void); + +extern void DMA_EnableChannel(unsigned int channel); +extern void DMA_EnableChannels(unsigned int bmChannels); + +extern void DMA_DisableChannel(unsigned int channel); +extern void DMA_DisableChannels(unsigned int bmChannels); + +extern void DMA_KeeponChannel(unsigned int channel); + +extern void DMA_ClearAutoMode(unsigned int channel); + +extern unsigned int DMA_GetChannelStatus(void); + +extern unsigned int DMA_GetStatus(void); + +extern unsigned int DMA_GetInterruptMask(void); + +extern unsigned int DMA_GetMaskedStatus(void); + +extern void DMA_EnableIt (unsigned int flag); + +extern void DMA_DisableIt (unsigned int flag); + +extern void DMA_SetSourceAddr(unsigned char channel, unsigned int address); + +extern void DMA_SetDestinationAddr(unsigned char channel, unsigned int address); + +extern void DMA_SetDescriptorAddr(unsigned char channel, unsigned int address); + +extern void DMA_SetSourceBufferSize(unsigned char channel, + unsigned int size, + unsigned char sourceWidth, + unsigned char desDMAdth, + unsigned char done); + +extern void DMA_SetSourceBufferMode(unsigned char channel, + unsigned char transferMode, + unsigned char addressingType); + +extern void DMA_SetDestBufferMode(unsigned char channel, + unsigned char transferMode, + unsigned char addressingType); + +extern void DMA_SetConfiguration(unsigned char channel, unsigned int value); + +#if defined(AT91C_SRC_PIP) +extern void DMA_SPIPconfiguration(unsigned char channel, + unsigned int pipHole, unsigned int pipBoundary); +#endif + +#if defined(AT91C_DST_PIP) +extern void DMA_DPIPconfiguration(unsigned char channel, + unsigned int pipHole, unsigned int pipBoundary); +#endif + +extern void DMA_SetFlowControl(unsigned char channel, + unsigned int flow); + + +#endif //#ifndef DMA_H -- cgit v1.2.3