From 044ad7c3987460ede48ff27afd6bdb0ca05a0432 Mon Sep 17 00:00:00 2001
From: Harald Welte <laforge@gnumonks.org>
Date: Mon, 4 Jul 2011 20:52:54 +0200
Subject: import at91lib from at91lib_20100901_softpack_1_9_v_1_0_svn_v15011
it's sad to see that atmel doesn't publish their svn repo or has
a centralized location or even puts proper version/release info
into the library itself
---
peripherals/pmc/pmc.c | 188 ++++++++++++++++++++++++++++++++++++++++++++++++++
peripherals/pmc/pmc.h | 62 +++++++++++++++++
2 files changed, 250 insertions(+)
create mode 100644 peripherals/pmc/pmc.c
create mode 100644 peripherals/pmc/pmc.h
(limited to 'peripherals/pmc')
diff --git a/peripherals/pmc/pmc.c b/peripherals/pmc/pmc.c
new file mode 100644
index 0000000..d464d51
--- /dev/null
+++ b/peripherals/pmc/pmc.c
@@ -0,0 +1,188 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#include "pmc.h"
+#include <board.h>
+#include <utility/assert.h>
+#include <utility/trace.h>
+
+#ifdef CP15_PRESENT
+#include <cp15/cp15.h>
+#endif
+
+#define MASK_STATUS 0x3FFFFFFC
+
+//------------------------------------------------------------------------------
+// Global functions
+//------------------------------------------------------------------------------
+
+#if defined(at91sam7l64) || defined(at91sam7l128)
+//------------------------------------------------------------------------------
+/// Sets the fast wake-up inputs that can get the device out of Wait mode.
+/// \param inputs Fast wake-up inputs to enable.
+//------------------------------------------------------------------------------
+void PMC_SetFastWakeUpInputs(unsigned int inputs)
+{
+ SANITY_CHECK((inputs & ~0xFF) == 0);
+ AT91C_BASE_PMC->PMC_FSMR = inputs;
+}
+
+#if !defined(__ICCARM__)
+__attribute__ ((section (".ramfunc"))) // GCC
+#endif
+//------------------------------------------------------------------------------
+/// Disables the main oscillator, making the device enter Wait mode.
+//------------------------------------------------------------------------------
+void PMC_DisableMainOscillatorForWaitMode(void)
+{
+ AT91C_BASE_PMC->PMC_MOR = 0x37 << 16;
+ while ((AT91C_BASE_PMC->PMC_MOR & AT91C_PMC_MAINSELS) != AT91C_PMC_MAINSELS);
+}
+
+#endif
+
+#if defined(at91sam7l)
+//------------------------------------------------------------------------------
+/// Disables the main oscillator when NOT running on it.
+//------------------------------------------------------------------------------
+void PMC_DisableMainOscillator(void)
+{
+ AT91C_BASE_PMC->PMC_MOR = 0x37 << 16;
+ while ((AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MAINSELS) == AT91C_PMC_MAINSELS);
+}
+#endif
+
+//------------------------------------------------------------------------------
+/// Disables the processor clock
+//------------------------------------------------------------------------------
+void PMC_DisableProcessorClock(void)
+{
+ AT91C_BASE_PMC->PMC_SCDR = AT91C_PMC_PCK;
+ while ((AT91C_BASE_PMC->PMC_SCSR & AT91C_PMC_PCK) != AT91C_PMC_PCK);
+}
+
+//------------------------------------------------------------------------------
+/// Enables the clock of a peripheral. The peripheral ID (AT91C_ID_xxx) is used
+/// to identify which peripheral is targetted.
+/// Note that the ID must NOT be shifted (i.e. 1 << AT91C_ID_xxx).
+/// \param id Peripheral ID (AT91C_ID_xxx).
+//------------------------------------------------------------------------------
+void PMC_EnablePeripheral(unsigned int id)
+{
+ SANITY_CHECK(id < 32);
+
+ if ((AT91C_BASE_PMC->PMC_PCSR & (1 << id)) == (1 << id)) {
+
+ TRACE_INFO("PMC_EnablePeripheral: clock of peripheral"
+ " %u is already enabled\n\r",
+ id);
+ }
+ else {
+
+ AT91C_BASE_PMC->PMC_PCER = 1 << id;
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Disables the clock of a peripheral. The peripheral ID (AT91C_ID_xxx) is used
+/// to identify which peripheral is targetted.
+/// Note that the ID must NOT be shifted (i.e. 1 << AT91C_ID_xxx).
+/// \param id Peripheral ID (AT91C_ID_xxx).
+//------------------------------------------------------------------------------
+void PMC_DisablePeripheral(unsigned int id)
+{
+ SANITY_CHECK(id < 32);
+
+ if ((AT91C_BASE_PMC->PMC_PCSR & (1 << id)) != (1 << id)) {
+
+ TRACE_INFO("PMC_DisablePeripheral: clock of peripheral"
+ " %u is not enabled\n\r",
+ id);
+ }
+ else {
+
+ AT91C_BASE_PMC->PMC_PCDR = 1 << id;
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Enable all the periph clock via PMC
+/// (Becareful of the last 2 bits, it is not periph clock)
+//------------------------------------------------------------------------------
+void PMC_EnableAllPeripherals(void)
+{
+ AT91C_BASE_PMC->PMC_PCER = MASK_STATUS;
+ while( (AT91C_BASE_PMC->PMC_PCSR & MASK_STATUS) != MASK_STATUS);
+ TRACE_INFO("Enable all periph clocks\n\r");
+}
+
+//------------------------------------------------------------------------------
+/// Disable all the periph clock via PMC
+/// (Becareful of the last 2 bits, it is not periph clock)
+//------------------------------------------------------------------------------
+void PMC_DisableAllPeripherals(void)
+{
+ AT91C_BASE_PMC->PMC_PCDR = MASK_STATUS;
+ while((AT91C_BASE_PMC->PMC_PCSR & MASK_STATUS) != 0);
+ TRACE_INFO("Disable all periph clocks\n\r");
+}
+
+//-----------------------------------------------------------------------------
+/// Get Periph Status
+//-----------------------------------------------------------------------------
+unsigned int PMC_IsAllPeriphEnabled(void)
+{
+ return (AT91C_BASE_PMC->PMC_PCSR == MASK_STATUS);
+}
+
+//-----------------------------------------------------------------------------
+/// Get Periph Status
+//-----------------------------------------------------------------------------
+unsigned int PMC_IsPeriphEnabled(unsigned int id)
+{
+ return (AT91C_BASE_PMC->PMC_PCSR & (1 << id));
+}
+//------------------------------------------------------------------------------
+/// Put the CPU in Idle Mode for lower consumption
+//------------------------------------------------------------------------------
+void PMC_CPUInIdleMode(void)
+{
+#ifndef CP15_PRESENT
+ PMC_DisableProcessorClock();
+#else
+ AT91C_BASE_PMC->PMC_SCDR = AT91C_PMC_PCK;
+ CP15_WaitForInterrupt();
+#endif
+}
+
+
diff --git a/peripherals/pmc/pmc.h b/peripherals/pmc/pmc.h
new file mode 100644
index 0000000..a53b365
--- /dev/null
+++ b/peripherals/pmc/pmc.h
@@ -0,0 +1,62 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+#ifndef PMC_H
+#define PMC_H
+
+//------------------------------------------------------------------------------
+// Global functions
+//------------------------------------------------------------------------------
+
+#if defined(at91sam7l64) || defined(at91sam7l128)
+extern void PMC_SetFastWakeUpInputs(unsigned int inputs);
+extern void PMC_DisableMainOscillator(void);
+extern
+#ifdef __ICCARM__
+__ramfunc
+#endif //__ICCARM__
+void PMC_DisableMainOscillatorForWaitMode(void);
+#endif // at91sam7l64 at91sam7l128
+
+extern void PMC_DisableProcessorClock(void);
+extern void PMC_EnablePeripheral(unsigned int id);
+extern void PMC_DisablePeripheral(unsigned int id);
+extern void PMC_CPUInIdleMode(void);
+
+
+extern void PMC_EnableAllPeripherals(void);
+
+extern void PMC_DisableAllPeripherals(void);
+
+extern unsigned int PMC_IsAllPeriphEnabled(void);
+
+extern unsigned int PMC_IsPeriphEnabled(unsigned int id);
+
+#endif //#ifndef PMC_H
+
--
cgit v1.2.3