From 044ad7c3987460ede48ff27afd6bdb0ca05a0432 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 4 Jul 2011 20:52:54 +0200 Subject: import at91lib from at91lib_20100901_softpack_1_9_v_1_0_svn_v15011 it's sad to see that atmel doesn't publish their svn repo or has a centralized location or even puts proper version/release info into the library itself --- peripherals/ssc/ssc.c | 413 ++++++++++++++++++++++++++++++++++++++++++++++++++ peripherals/ssc/ssc.h | 156 +++++++++++++++++++ 2 files changed, 569 insertions(+) create mode 100644 peripherals/ssc/ssc.c create mode 100644 peripherals/ssc/ssc.h (limited to 'peripherals/ssc') diff --git a/peripherals/ssc/ssc.c b/peripherals/ssc/ssc.c new file mode 100644 index 0000000..52a8566 --- /dev/null +++ b/peripherals/ssc/ssc.c @@ -0,0 +1,413 @@ +/* ---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support + * ---------------------------------------------------------------------------- + * Copyright (c) 2008, Atmel Corporation + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the disclaimer below. + * + * Atmel's name may not be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * ---------------------------------------------------------------------------- + */ + +//------------------------------------------------------------------------------ +// Headers +//------------------------------------------------------------------------------ + +#include "ssc.h" +#include +#if defined(CHIP_SSC_DMA) +#include +#include +#endif + +//------------------------------------------------------------------------------ +// Local variables +//------------------------------------------------------------------------------ +#if defined(CHIP_SSC_DMA) +static DmaLinkList LLI_CH [MAX_SSC_LLI_SIZE]; +#endif + +//------------------------------------------------------------------------------ +// Local macros +//------------------------------------------------------------------------------ +#if defined(CHIP_SSC_DMA) +#define LAST_ROW 0x100 +#endif + +//------------------------------------------------------------------------------ +// Internal Functions +//------------------------------------------------------------------------------ +#if defined(CHIP_SSC_DMA) +static void AT91F_Prepare_Multiple_Transfer(unsigned int Channel, + unsigned int LLI_rownumber, + unsigned int LLI_Last_Row, + unsigned int From_add, + unsigned int To_add, + unsigned int Ctrla, + unsigned int Ctrlb) +{ + LLI_CH[LLI_rownumber].sourceAddress = From_add; + LLI_CH[LLI_rownumber].destAddress = To_add; + LLI_CH[LLI_rownumber].controlA = Ctrla; + LLI_CH[LLI_rownumber].controlB = Ctrlb; + if (LLI_Last_Row != LAST_ROW) + LLI_CH[LLI_rownumber].descriptor = + (unsigned int)&LLI_CH[LLI_rownumber + 1] + 0; + else + LLI_CH[LLI_rownumber].descriptor = 0; +} +#endif + +//------------------------------------------------------------------------------ +// Exported functions +//------------------------------------------------------------------------------ +//------------------------------------------------------------------------------ +/// Configures a SSC peripheral. If the divided clock is not used, the master +/// clock frequency can be set to 0. +/// \note The emitter and transmitter are disabled by this function. +/// \param ssc Pointer to an AT91S_SSC instance. +/// \param id Peripheral ID of the SSC. +//------------------------------------------------------------------------------ +void SSC_Configure(AT91S_SSC *ssc, + unsigned int id, + unsigned int bitRate, + unsigned int masterClock) +{ + // Enable SSC peripheral clock + AT91C_BASE_PMC->PMC_PCER = 1 << id; + + // Reset, disable receiver & transmitter + ssc->SSC_CR = AT91C_SSC_RXDIS | AT91C_SSC_TXDIS | AT91C_SSC_SWRST; + + #if !defined(CHIP_SSC_DMA) + ssc->SSC_PTCR = AT91C_PDC_RXTDIS | AT91C_PDC_TXTDIS; + #endif + + // Configure clock frequency + if (bitRate != 0) { + + ssc->SSC_CMR = masterClock / (2 * bitRate); + } + else { + + ssc->SSC_CMR = 0; + } +} + +//------------------------------------------------------------------------------ +/// Configures the transmitter of a SSC peripheral. Several macros can be used +/// to compute the values of the Transmit Clock Mode Register (TCMR) and the +/// Transmit Frame Mode Register (TFMR) (see "SSC configuration macros"). +/// \param ssc Pointer to a AT91S_SSC instance. +/// \param tcmr Transmit Clock Mode Register value. +/// \param tfmr Transmit Frame Mode Register value. +//------------------------------------------------------------------------------ +void SSC_ConfigureTransmitter(AT91S_SSC *ssc, + unsigned int tcmr, + unsigned int tfmr) +{ + ssc->SSC_TCMR = tcmr; + ssc->SSC_TFMR = tfmr; +} + +//------------------------------------------------------------------------------ +/// Configures the receiver of a SSC peripheral. Several macros can be used +/// to compute the values of the Receive Clock Mode Register (TCMR) and the +/// Receive Frame Mode Register (TFMR) (see "SSC configuration macros"). +/// \param ssc Pointer to a AT91S_SSC instance. +/// \param rcmr Receive Clock Mode Register value. +/// \param rfmr Receive Frame Mode Register value. +//------------------------------------------------------------------------------ +void SSC_ConfigureReceiver(AT91S_SSC *ssc, + unsigned int rcmr, + unsigned int rfmr) +{ + ssc->SSC_RCMR = rcmr; + ssc->SSC_RFMR = rfmr; +} + +//------------------------------------------------------------------------------ +/// Enables the transmitter of a SSC peripheral. +/// \param ssc Pointer to an AT91S_SSC instance. +//------------------------------------------------------------------------------ +void SSC_EnableTransmitter(AT91S_SSC *ssc) +{ + ssc->SSC_CR = AT91C_SSC_TXEN; +} + +//------------------------------------------------------------------------------ +/// Disables the transmitter of a SSC peripheral. +/// \param ssc Pointer to an AT91S_SSC instance. +//------------------------------------------------------------------------------ +void SSC_DisableTransmitter(AT91S_SSC *ssc) +{ + ssc->SSC_CR = AT91C_SSC_TXDIS; +} + +//------------------------------------------------------------------------------ +/// Enables the receiver of a SSC peripheral. +/// \param ssc Pointer to an AT91S_SSC instance. +//------------------------------------------------------------------------------ +void SSC_EnableReceiver(AT91S_SSC *ssc) +{ + ssc->SSC_CR = AT91C_SSC_RXEN; +} + +//------------------------------------------------------------------------------ +/// Disables the receiver of a SSC peripheral. +/// \param ssc Pointer to an AT91S_SSC instance. +//------------------------------------------------------------------------------ +void SSC_DisableReceiver(AT91S_SSC *ssc) +{ + ssc->SSC_CR = AT91C_SSC_RXDIS; +} + +//------------------------------------------------------------------------------ +/// Enables one or more interrupt sources of a SSC peripheral. +/// \param ssc Pointer to an AT91S_SSC instance. +/// \param sources Interrupt sources to enable. +//------------------------------------------------------------------------------ +void SSC_EnableInterrupts(AT91S_SSC *ssc, unsigned int sources) +{ + ssc->SSC_IER = sources; +} + +//------------------------------------------------------------------------------ +/// Disables one or more interrupt sources of a SSC peripheral. +/// \param ssc Pointer to an AT91S_SSC instance. +/// \param sources Interrupt source to disable. +//------------------------------------------------------------------------------ +void SSC_DisableInterrupts(AT91S_SSC *ssc, unsigned int sources) +{ + ssc->SSC_IDR = sources; +} + +//------------------------------------------------------------------------------ +/// Sends one data frame through a SSC peripheral. If another frame is currently +/// being sent, this function waits for the previous transfer to complete. +/// \param ssc Pointer to an AT91S_SSC instance. +/// \param frame Data frame to send. +//------------------------------------------------------------------------------ +void SSC_Write(AT91S_SSC *ssc, unsigned int frame) +{ + while ((ssc->SSC_SR & AT91C_SSC_TXRDY) == 0); + ssc->SSC_THR = frame; +} + +//------------------------------------------------------------------------------ +/// Sends the contents of a data buffer a SSC peripheral, using the PDC. Returns +/// true if the buffer has been queued for transmission; otherwise returns +/// false. +/// \param ssc Pointer to an AT91S_SSC instance. +/// \param buffer Data buffer to send. +/// \param length Size of the data buffer. +//------------------------------------------------------------------------------ +unsigned char SSC_WriteBuffer(AT91S_SSC *ssc, + void *buffer, + unsigned int length) +{ +#if !defined(CHIP_SSC_DMA) + // Check if first bank is free + if (ssc->SSC_TCR == 0) { + + ssc->SSC_TPR = (unsigned int) buffer; + ssc->SSC_TCR = length; + ssc->SSC_PTCR = AT91C_PDC_TXTEN; + return 1; + } + // Check if second bank is free + else if (ssc->SSC_TNCR == 0) { + + ssc->SSC_TNPR = (unsigned int) buffer; + ssc->SSC_TNCR = length; + return 1; + } +#else + + #if defined(SSC_DMA_WORD) + unsigned int* startSourceAddr; + unsigned int* startDestAddr; + #elif defined(SSC_DMA_HALFWORD) + unsigned short* startSourceAddr; + unsigned short* startDestAddr; + #endif + unsigned int srcAddress; + unsigned int destAddress; + unsigned int buffSize; + unsigned int LLI_rownumber = 0; + unsigned int ctrla; + + #if defined(SSC_DMA_WORD) + startSourceAddr = (unsigned int*)(buffer); + startDestAddr = (unsigned int*)(&ssc->SSC_THR); + #elif defined(SSC_DMA_HALFWORD) + startSourceAddr = (unsigned short*)(buffer); + startDestAddr = (unsigned short*)(&ssc->SSC_THR); + #endif + srcAddress = (unsigned int)startSourceAddr; // Set the data start address + destAddress = (unsigned int)startDestAddr; + buffSize = length; + if(buffSize > 0x8000){ + TRACE_WARNING("SSC DMA, size too big %d\n\r", buffSize); + buffSize = 0x8000; + } + + // Set DMA channel DSCR + DMA_SetDescriptorAddr(BOARD_SSC_DMA_CHANNEL, (unsigned int)&LLI_CH[0]); + + // Clear any pending interrupts + DMA_GetStatus(); + + //Set DMA channel control B + DMA_SetSourceBufferMode(BOARD_SSC_DMA_CHANNEL, DMA_TRANSFER_LLI, + (AT91C_HDMA_SRC_ADDRESS_MODE_INCR >> 24)); + DMA_SetDestBufferMode(BOARD_SSC_DMA_CHANNEL, DMA_TRANSFER_LLI, + (AT91C_HDMA_DST_ADDRESS_MODE_FIXED >> 28)); + DMA_SetFlowControl(BOARD_SSC_DMA_CHANNEL, AT91C_HDMA_FC_MEM2PER >> 21); + + // Set DMA channel config + DMA_SetConfiguration(BOARD_SSC_DMA_CHANNEL, BOARD_SSC_DMA_HW_SRC_REQ_ID \ + | BOARD_SSC_DMA_HW_DEST_REQ_ID \ + | AT91C_HDMA_SRC_H2SEL_SW \ + | AT91C_HDMA_DST_H2SEL_HW \ + | AT91C_HDMA_SOD_DISABLE \ + | AT91C_HDMA_FIFOCFG_LARGESTBURST); + + // Set link list + while(srcAddress < ((unsigned int)(startSourceAddr + buffSize))) + { + if(((unsigned int)(startSourceAddr + buffSize)) - srcAddress <= (BOARD_SSC_DMA_FIFO_SIZE) ) + { + + #if defined(SSC_DMA_WORD) + ctrla = (((((unsigned int)(startSourceAddr + buffSize)) + - srcAddress)/4) + | AT91C_HDMA_SRC_WIDTH_WORD + | AT91C_HDMA_DST_WIDTH_WORD + | AT91C_HDMA_SCSIZE_4 + | AT91C_HDMA_DCSIZE_1 + ); + #elif defined(SSC_DMA_HALFWORD) + ctrla = (((((unsigned int)(startSourceAddr + buffSize)) + - srcAddress)/2) + | AT91C_HDMA_SRC_WIDTH_HALFWORD + | AT91C_HDMA_DST_WIDTH_HALFWORD + | AT91C_HDMA_SCSIZE_1 + | AT91C_HDMA_DCSIZE_1 + ); + #endif + AT91F_Prepare_Multiple_Transfer(BOARD_SSC_DMA_CHANNEL, LLI_rownumber, LAST_ROW, + srcAddress, + destAddress, + ctrla, + ( //| AT91C_HDMA_DST_DSCR_FETCH_FROM_MEM + AT91C_HDMA_DST_DSCR_FETCH_DISABLE + | AT91C_HDMA_DST_ADDRESS_MODE_FIXED + | AT91C_HDMA_SRC_DSCR_FETCH_FROM_MEM + //| AT91C_HDMA_SRC_DSCR_FETCH_DISABLE + | AT91C_HDMA_SRC_ADDRESS_MODE_INCR + | AT91C_HDMA_FC_MEM2PER)); + } + else + { + + #if defined(SSC_DMA_WORD) + ctrla = (((BOARD_SSC_DMA_FIFO_SIZE)/4) + | AT91C_HDMA_SRC_WIDTH_WORD + | AT91C_HDMA_DST_WIDTH_WORD + | AT91C_HDMA_SCSIZE_4 + | AT91C_HDMA_DCSIZE_1 + ); + #elif defined(SSC_DMA_HALFWORD) + ctrla = (((BOARD_SSC_DMA_FIFO_SIZE)/2) + | AT91C_HDMA_SRC_WIDTH_HALFWORD + | AT91C_HDMA_DST_WIDTH_HALFWORD + | AT91C_HDMA_SCSIZE_1 + | AT91C_HDMA_DCSIZE_1 + ); + #endif + AT91F_Prepare_Multiple_Transfer(BOARD_SSC_DMA_CHANNEL, LLI_rownumber, 0, + srcAddress, + destAddress, + ctrla, + ( //| AT91C_HDMA_DST_DSCR_FETCH_FROM_MEM + AT91C_HDMA_DST_DSCR_FETCH_DISABLE + | AT91C_HDMA_DST_ADDRESS_MODE_FIXED + | AT91C_HDMA_SRC_DSCR_FETCH_FROM_MEM + //| AT91C_HDMA_SRC_DSCR_FETCH_DISABLE + | AT91C_HDMA_SRC_ADDRESS_MODE_INCR + | AT91C_HDMA_FC_MEM2PER)); + + } + + srcAddress += BOARD_SSC_DMA_FIFO_SIZE; + + + LLI_rownumber++; + } +#endif + // No free banks + return 0; +} + +//------------------------------------------------------------------------------ +/// Waits until one frame is received on a SSC peripheral, and returns it. +/// \param ssc Pointer to an AT91S_SSC instance. +//------------------------------------------------------------------------------ +unsigned int SSC_Read(AT91S_SSC *ssc) +{ + while ((ssc->SSC_SR & AT91C_SSC_RXRDY) == 0); + return ssc->SSC_RHR; +} + +//------------------------------------------------------------------------------ +/// Reads data coming from a SSC peripheral receiver and stores it into the +/// provided buffer. Returns true if the buffer has been queued for reception; +/// otherwise returns false. +/// \param ssc Pointer to an AT91S_SSC instance. +/// \param buffer Data buffer used for reception. +/// \param length Size in bytes of the data buffer. +//------------------------------------------------------------------------------ +unsigned char SSC_ReadBuffer(AT91S_SSC *ssc, + void *buffer, + unsigned int length) +{ +#if !defined(CHIP_SSC_DMA) + // Check if the first bank is free + if (ssc->SSC_RCR == 0) { + + ssc->SSC_RPR = (unsigned int) buffer; + ssc->SSC_RCR = length; + ssc->SSC_PTCR = AT91C_PDC_RXTEN; + return 1; + } + // Check if second bank is free + else if (ssc->SSC_RNCR == 0) { + + ssc->SSC_RNPR = (unsigned int) buffer; + ssc->SSC_RNCR = length; + return 1; + } +#endif + // No free bank + return 0; +} + diff --git a/peripherals/ssc/ssc.h b/peripherals/ssc/ssc.h new file mode 100644 index 0000000..78295bd --- /dev/null +++ b/peripherals/ssc/ssc.h @@ -0,0 +1,156 @@ +/* ---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support + * ---------------------------------------------------------------------------- + * Copyright (c) 2008, Atmel Corporation + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the disclaimer below. + * + * Atmel's name may not be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * ---------------------------------------------------------------------------- + */ + +//------------------------------------------------------------------------------ +/// \dir +/// !Purpose +/// +/// Set of functions and definition for using a SSC peripheral. +/// +/// !Usage +/// +/// -# Enable the SSC interface pins (see pio & board.h). +/// -# Configure the SSC to operate at a specific frequency by calling +/// SSC_Configure(). This function enables the peripheral clock of the SSC, +/// but not its PIOs. +/// -# Configure the transmitter and/or the receiver using the +/// SSC_ConfigureTransmitter() and SSC_ConfigureEmitter() functions. +/// -# Enable the PIOs or the transmitter and/or the received. +/// -# Enable the transmitter and/or the receiver using SSC_EnableTransmitter() +/// and SSC_EnableReceiver() +/// -# Send data through the transmitter using SSC_Write() and SSC_WriteBuffer() +/// -# Receive data from the receiver using SSC_Read() and SSC_ReadBuffer() +/// -# Disable the transmitter and/or the receiver using SSC_DisableTransmitter() +/// and SSC_DisableReceiver() +//------------------------------------------------------------------------------ + +#ifndef SSC_H +#define SSC_H + +//------------------------------------------------------------------------------ +// Headers +//------------------------------------------------------------------------------ + +#include + +//------------------------------------------------------------------------------ +// Definitions +//------------------------------------------------------------------------------ + +//------------------------------------------------------------------------------ +/// \page "SSC configuration macros" +/// This page lists several macros which are used when configuring a SSC +/// peripheral. +/// +/// !Macros +/// - SSC_STTDLY +/// - SSC_PERIOD +/// - SSC_DATLEN +/// - SSC_DATNB +/// - SSC_FSLEN + +/// Calculates the value of the STTDLY field given the number of clock cycles +/// before the first bit of a new frame is transmitted. +#define SSC_STTDLY(bits) (bits << 16) + +/// Calculates the value of the PERIOD field of the Transmit Clock Mode Register +/// of an SSC interface, given the desired clock divider. +#define SSC_PERIOD(divider) (((divider / 2) - 1) << 24) + +/// Calculates the value of the DATLEN field of the Transmit Frame Mode Register +/// of an SSC interface, given the number of bits in one sample. +#define SSC_DATLEN(bits) (bits - 1) + +/// Calculates the value of the DATNB field of the Transmit Frame Mode Register +/// of an SSC interface, given the number of samples in one frame. +#define SSC_DATNB(samples) ((samples -1) << 8) + +/// Calculates the value of the FSLEN field of the Transmit Frame Mode Register +/// of an SSC interface, given the number of transmit clock periods that the +/// frame sync signal should take. +#define SSC_FSLEN(periods) ((periods - 1) << 16) + +/// SSC DMA Fifo size +#define BOARD_SSC_DMA_FIFO_SIZE (4*1024) + +/// SSC Linked list size +#define MAX_SSC_LLI_SIZE 8 + +#define SSC_DMA_WORD +//#define SSC_DMA_HALFWORD + +#define AT91C_I2S_MASTER_TX_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\ + AT91C_SSC_CKS_DIV +\ + AT91C_SSC_CKO_CONTINOUS +\ + AT91C_SSC_START_FALL_RF +\ + ((1<<16) & AT91C_SSC_STTDLY) +\ + ((((nb_bit_by_slot*nb_slot_by_frame)/2)-1) <<24)) + +#define AT91C_I2S_TX_FRAME_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\ + (nb_bit_by_slot-1) +\ + AT91C_SSC_MSBF +\ + (((nb_slot_by_frame-1)<<8) & AT91C_SSC_DATNB) +\ + (((nb_bit_by_slot-1)<<16) & AT91C_SSC_FSLEN) +\ + AT91C_SSC_FSOS_NEGATIVE) + +//------------------------------------------------------------------------------ + +//------------------------------------------------------------------------------ +// Exported functions +//------------------------------------------------------------------------------ +extern void SSC_Configure(AT91S_SSC *ssc, + unsigned int id, + unsigned int bitRate, + unsigned int masterClock); +extern void SSC_ConfigureTransmitter(AT91S_SSC *ssc, + unsigned int tcmr, + unsigned int tfmr); +extern void SSC_ConfigureReceiver(AT91S_SSC *ssc, + unsigned int rcmr, + unsigned int rfmr); + +extern void SSC_EnableTransmitter(AT91S_SSC *ssc); +extern void SSC_DisableTransmitter(AT91S_SSC *ssc); +extern void SSC_EnableReceiver(AT91S_SSC *ssc); +extern void SSC_DisableReceiver(AT91S_SSC *ssc); + +extern void SSC_EnableInterrupts(AT91S_SSC *ssc, unsigned int sources); +extern void SSC_DisableInterrupts(AT91S_SSC *ssc, unsigned int sources); + +extern void SSC_Write(AT91S_SSC *ssc, unsigned int frame); +extern unsigned char SSC_WriteBuffer(AT91S_SSC *ssc, + void *buffer, + unsigned int length); +extern unsigned int SSC_Read(AT91S_SSC *ssc); +extern unsigned char SSC_ReadBuffer(AT91S_SSC *ssc, + void *buffer, + unsigned int length); + +#endif //#ifndef SSC_H + -- cgit v1.2.3