/* ----------------------------------------------------------------------------
 *         ATMEL Microcontroller Software Support 
 * ----------------------------------------------------------------------------
 * Copyright (c) 2008, Atmel Corporation
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */

//------------------------------------------------------------------------------
/// \unit
///
/// !Purpose
///
/// Provides the low-level initialization function that gets called on chip
/// startup.
///
/// !Usage
///
/// LowLevelInit() is called in #board_cstartup.S#.
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
//         Headers
//------------------------------------------------------------------------------

#include "board.h"
#include "board_memories.h"
#include <pmc/pmc.h>

//------------------------------------------------------------------------------
//         Internal definitions
//------------------------------------------------------------------------------
// Startup time of main oscillator (in number of slow clock ticks).
#define BOARD_OSCOUNT           (AT91C_CKGR_OSCOUNT & (0x40 << 8))

// USB PLL divisor value to obtain a 48MHz clock.
#define BOARD_USBDIV            AT91C_CKGR_USBDIV_1

// PLL frequency range.
#define BOARD_CKGR_PLL          AT91C_CKGR_OUT_0

// PLL startup time (in number of slow clock ticks).
#define BOARD_PLLCOUNT          (16 << 8)

// PLL MUL value.
#define BOARD_MUL               (AT91C_CKGR_MUL & (72 << 16))

// PLL DIV value.
#define BOARD_DIV               (AT91C_CKGR_DIV & 14)

// Master clock prescaler value.
#define BOARD_PRESCALER         AT91C_PMC_PRES_CLK_2

//------------------------------------------------------------------------------
//         Internal functions
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
/// Default spurious interrupt handler. Infinite loop.
//------------------------------------------------------------------------------
void defaultSpuriousHandler( void )
{
    while (1);
}

//------------------------------------------------------------------------------
/// Default handler for fast interrupt requests. Infinite loop.
//------------------------------------------------------------------------------
void defaultFiqHandler( void )
{
    while (1);
}

//------------------------------------------------------------------------------
/// Default handler for standard interrupt requests. Infinite loop.
//------------------------------------------------------------------------------
void defaultIrqHandler( void )
{
    while (1);
}

//------------------------------------------------------------------------------
//         Exported functions
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
/// Performs the low-level initialization of the chip. This includes EFC, master
/// clock, AIC & watchdog configuration, as well as memory remapping.
//------------------------------------------------------------------------------
void LowLevelInit( void )
{
    unsigned char i;

    /* Set flash wait states in the EFC
     **********************************/
    /* 48MHz = 1 wait state */
#if defined(at91sam7x512)
    AT91C_BASE_EFC0->EFC_FMR = AT91C_MC_FWS_1FWS;
    AT91C_BASE_EFC1->EFC_FMR = AT91C_MC_FWS_1FWS;
#elif defined(at91sam7x128) || defined(at91sam7x256)
    AT91C_BASE_MC->MC_FMR = AT91C_MC_FWS_1FWS;
#else
    #error No chip definition ?
#endif

    /* Initialize main oscillator
     ****************************/
    AT91C_BASE_PMC->PMC_MOR = BOARD_OSCOUNT | AT91C_CKGR_MOSCEN;
    while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS));

    /* Initialize PLL at 96MHz (96.109) and USB clock to 48MHz */
    AT91C_BASE_PMC->PMC_PLLR = BOARD_USBDIV | BOARD_CKGR_PLL | BOARD_PLLCOUNT
                               | BOARD_MUL | BOARD_DIV;
    while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK));

    /* Wait for the master clock if it was already initialized */
    while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY));

    /* Switch to fast clock
     **********************/
    /* Switch to slow clock + prescaler */
    AT91C_BASE_PMC->PMC_MCKR = BOARD_PRESCALER;
    while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY));

    /* Switch to fast clock + prescaler */
    AT91C_BASE_PMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK;
    while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY));

    /* Initialize AIC
     ****************/
    AT91C_BASE_AIC->AIC_IDCR = 0xFFFFFFFF;
    AT91C_BASE_AIC->AIC_SVR[0] = (unsigned int) defaultFiqHandler;
    for (i = 1; i < 31; i++) {

        AT91C_BASE_AIC->AIC_SVR[i] = (unsigned int) defaultIrqHandler;
    }
    AT91C_BASE_AIC->AIC_SPU = (unsigned int) defaultSpuriousHandler;

    // Unstack nested interrupts
    for (i = 0; i < 8 ; i++) {

        AT91C_BASE_AIC->AIC_EOICR = 0;
    }

    // Enable Debug mode
    AT91C_BASE_AIC->AIC_DCR = AT91C_AIC_DCR_PROT;

    /* Watchdog initialization
     *************************/
    AT91C_BASE_WDTC->WDTC_WDMR = AT91C_WDTC_WDDIS;

    /* Remap
     *******/
    BOARD_RemapRam();

    // Disable RTT and PIT interrupts (potential problem when program A
    // configures RTT, then program B wants to use PIT only, interrupts
    // from the RTT will still occur since they both use AT91C_ID_SYS)
    AT91C_BASE_RTTC->RTTC_RTMR &= ~(AT91C_RTTC_ALMIEN | AT91C_RTTC_RTTINCIEN);
    AT91C_BASE_PITC->PITC_PIMR &= ~AT91C_PITC_PITIEN;
}