From 98f9d442b44dbe2e3e4b3c8296be7e78d5d05450 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Sun, 24 Jul 2011 09:39:28 +0200 Subject: initial import of the usb ccid example for the sam7s --- at91lib/peripherals/pio/pio.c | 346 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 346 insertions(+) create mode 100644 at91lib/peripherals/pio/pio.c (limited to 'at91lib/peripherals/pio/pio.c') diff --git a/at91lib/peripherals/pio/pio.c b/at91lib/peripherals/pio/pio.c new file mode 100644 index 0000000..5b21751 --- /dev/null +++ b/at91lib/peripherals/pio/pio.c @@ -0,0 +1,346 @@ +/* ---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support + * ---------------------------------------------------------------------------- + * Copyright (c) 2008, Atmel Corporation + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the disclaimer below. + * + * Atmel's name may not be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * ---------------------------------------------------------------------------- + */ + +//------------------------------------------------------------------------------ +// Headers +//------------------------------------------------------------------------------ + +#include "pio.h" +#include + +//------------------------------------------------------------------------------ +// Local Functions +//------------------------------------------------------------------------------ + +//------------------------------------------------------------------------------ +/// Configures one or more pin(s) of a PIO controller as being controlled by +/// peripheral A. Optionally, the corresponding internal pull-up(s) can be +/// enabled. +/// \param pio Pointer to a PIO controller. +/// \param mask Bitmask of one or more pin(s) to configure. +/// \param enablePullUp Indicates if the pin(s) internal pull-up shall be +/// configured. +//------------------------------------------------------------------------------ +static void PIO_SetPeripheralA( + AT91S_PIO *pio, + unsigned int mask, + unsigned char enablePullUp) +{ + // Disable interrupts on the pin(s) + pio->PIO_IDR = mask; + + // Enable the pull-up(s) if necessary + if (enablePullUp) { + + pio->PIO_PPUER = mask; + } + else { + + pio->PIO_PPUDR = mask; + } + + // Configure pin + pio->PIO_ASR = mask; + pio->PIO_PDR = mask; +} + +//------------------------------------------------------------------------------ +/// Configures one or more pin(s) of a PIO controller as being controlled by +/// peripheral B. Optionally, the corresponding internal pull-up(s) can be +/// enabled. +/// \param pio Pointer to a PIO controller. +/// \param mask Bitmask of one or more pin(s) to configure. +/// \param enablePullUp Indicates if the pin(s) internal pull-up shall be +/// configured. +//------------------------------------------------------------------------------ +static void PIO_SetPeripheralB( + AT91S_PIO *pio, + unsigned int mask, + unsigned char enablePullUp) +{ + // Disable interrupts on the pin(s) + pio->PIO_IDR = mask; + + // Enable the pull-up(s) if necessary + if (enablePullUp) { + + pio->PIO_PPUER = mask; + } + else { + + pio->PIO_PPUDR = mask; + } + + // Configure pin + pio->PIO_BSR = mask; + pio->PIO_PDR = mask; +} + +//------------------------------------------------------------------------------ +/// Configures one or more pin(s) or a PIO controller as inputs. Optionally, +/// the corresponding internal pull-up(s) and glitch filter(s) can be +/// enabled. +/// \param pio Pointer to a PIO controller. +/// \param mask Bitmask indicating which pin(s) to configure as input(s). +/// \param enablePullUp Indicates if the internal pull-up(s) must be enabled. +/// \param enableFilter Indicates if the glitch filter(s) must be enabled. +//------------------------------------------------------------------------------ +static void PIO_SetInput( + AT91S_PIO *pio, + unsigned int mask, + unsigned char enablePullUp, + unsigned char enableFilter) +{ + // Disable interrupts + pio->PIO_IDR = mask; + + // Enable pull-up(s) if necessary + if (enablePullUp) { + + pio->PIO_PPUER = mask; + } + else { + + pio->PIO_PPUDR = mask; + } + + // Enable filter(s) if necessary + if (enableFilter) { + + pio->PIO_IFER = mask; + } + else { + + pio->PIO_IFDR = mask; + } + + // Configure pin as input + pio->PIO_ODR = mask; + pio->PIO_PER = mask; +} + +//------------------------------------------------------------------------------ +/// Configures one or more pin(s) of a PIO controller as outputs, with the +/// given default value. Optionally, the multi-drive feature can be enabled +/// on the pin(s). +/// \param pio Pointer to a PIO controller. +/// \param mask Bitmask indicating which pin(s) to configure. +/// \param defaultValue Default level on the pin(s). +/// \param enableMultiDrive Indicates if the pin(s) shall be configured as +/// open-drain. +/// \param enablePullUp Indicates if the pin shall have its pull-up activated. +//------------------------------------------------------------------------------ +static void PIO_SetOutput( + AT91S_PIO *pio, + unsigned int mask, + unsigned char defaultValue, + unsigned char enableMultiDrive, + unsigned char enablePullUp) +{ + // Disable interrupts + pio->PIO_IDR = mask; + + // Enable pull-up(s) if necessary + if (enablePullUp) { + + pio->PIO_PPUER = mask; + } + else { + + pio->PIO_PPUDR = mask; + } + + // Enable multi-drive if necessary + if (enableMultiDrive) { + + pio->PIO_MDER = mask; + } + else { + + pio->PIO_MDDR = mask; + } + + // Set default value + if (defaultValue) { + + pio->PIO_SODR = mask; + } + else { + + pio->PIO_CODR = mask; + } + + // Configure pin(s) as output(s) + pio->PIO_OER = mask; + pio->PIO_PER = mask; +} + +//------------------------------------------------------------------------------ +// Global Functions +//------------------------------------------------------------------------------ + +//------------------------------------------------------------------------------ +/// Configures a list of Pin instances, each of which can either hold a single +/// pin or a group of pins, depending on the mask value; all pins are configured +/// by this function. The size of the array must also be provided and is easily +/// computed using PIO_LISTSIZE whenever its length is not known in advance. +/// \param list Pointer to a list of Pin instances. +/// \param size Size of the Pin list (calculated using PIO_LISTSIZE). +/// \return 1 if the pins have been configured properly; otherwise 0. +//------------------------------------------------------------------------------ +unsigned char PIO_Configure(const Pin *list, unsigned int size) +{ + // Configure pins + while (size > 0) { + + switch (list->type) { + + case PIO_PERIPH_A: + PIO_SetPeripheralA(list->pio, + list->mask, + (list->attribute & PIO_PULLUP) ? 1 : 0); + break; + + case PIO_PERIPH_B: + PIO_SetPeripheralB(list->pio, + list->mask, + (list->attribute & PIO_PULLUP) ? 1 : 0); + break; + + case PIO_INPUT: + AT91C_BASE_PMC->PMC_PCER = 1 << list->id; + PIO_SetInput(list->pio, + list->mask, + (list->attribute & PIO_PULLUP) ? 1 : 0, + (list->attribute & PIO_DEGLITCH)? 1 : 0); + break; + + case PIO_OUTPUT_0: + case PIO_OUTPUT_1: + PIO_SetOutput(list->pio, + list->mask, + (list->type == PIO_OUTPUT_1), + (list->attribute & PIO_OPENDRAIN) ? 1 : 0, + (list->attribute & PIO_PULLUP) ? 1 : 0); + break; + + default: return 0; + } + + list++; + size--; + } + + return 1; +} + +//------------------------------------------------------------------------------ +/// Sets a high output level on all the PIOs defined in the given Pin instance. +/// This has no immediate effects on PIOs that are not output, but the PIO +/// controller will memorize the value they are changed to outputs. +/// \param pin Pointer to a Pin instance describing one or more pins. +//------------------------------------------------------------------------------ +void PIO_Set(const Pin *pin) +{ + pin->pio->PIO_SODR = pin->mask; +} + +//------------------------------------------------------------------------------ +/// Sets a low output level on all the PIOs defined in the given Pin instance. +/// This has no immediate effects on PIOs that are not output, but the PIO +/// controller will memorize the value they are changed to outputs. +/// \param pin Pointer to a Pin instance describing one or more pins. +//------------------------------------------------------------------------------ +void PIO_Clear(const Pin *pin) +{ + pin->pio->PIO_CODR = pin->mask; +} + +//------------------------------------------------------------------------------ +/// Returns 1 if one or more PIO of the given Pin instance currently have a high +/// level; otherwise returns 0. This method returns the actual value that is +/// being read on the pin. To return the supposed output value of a pin, use +/// PIO_GetOutputDataStatus() instead. +/// \param pin Pointer to a Pin instance describing one or more pins. +/// \return 1 if the Pin instance contains at least one PIO that currently has +/// a high level; otherwise 0. +//------------------------------------------------------------------------------ +unsigned char PIO_Get(const Pin *pin) +{ + unsigned int reg; + if ((pin->type == PIO_OUTPUT_0) || (pin->type == PIO_OUTPUT_1)) { + + reg = pin->pio->PIO_ODSR; + } + else { + + reg = pin->pio->PIO_PDSR; + } + + if ((reg & pin->mask) == 0) { + + return 0; + } + else { + + return 1; + } +} + + +//------------------------------------------------------------------------------ +/// Returns 1 if one or more PIO of the given Pin are configured to output a +/// high level (even if they are not output). +/// To get the actual value of the pin, use PIO_Get() instead. +/// \param pin Pointer to a Pin instance describing one or more pins. +/// \return 1 if the Pin instance contains at least one PIO that is configured +/// to output a high level; otherwise 0. +//------------------------------------------------------------------------------ +unsigned char PIO_GetOutputDataStatus(const Pin *pin) +{ + if ((pin->pio->PIO_ODSR & pin->mask) == 0) { + + return 0; + } + else { + + return 1; + } +} + +//------------------------------------------------------------------------------ +/// Returns the value of ISR for the PIO controller of the pin. +/// Reading this register acknoledges all the ITs. +/// \param pin Pointer to a Pin instance describing one or more pins. +//------------------------------------------------------------------------------ +unsigned int PIO_GetISR(const Pin *pin) +{ + return (pin->pio->PIO_ISR); +} + -- cgit v1.2.3