From 98f9d442b44dbe2e3e4b3c8296be7e78d5d05450 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Sun, 24 Jul 2011 09:39:28 +0200 Subject: initial import of the usb ccid example for the sam7s --- usb-device-ccid-project/Makefile | 165 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 165 insertions(+) create mode 100644 usb-device-ccid-project/Makefile (limited to 'usb-device-ccid-project/Makefile') diff --git a/usb-device-ccid-project/Makefile b/usb-device-ccid-project/Makefile new file mode 100644 index 0000000..d517d1c --- /dev/null +++ b/usb-device-ccid-project/Makefile @@ -0,0 +1,165 @@ +# ---------------------------------------------------------------------------- +# ATMEL Microcontroller Software Support +# ---------------------------------------------------------------------------- +# Copyright (c) 2008, Atmel Corporation +# +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# +# - Redistributions of source code must retain the above copyright notice, +# this list of conditions and the disclaimer below. +# +# Atmel's name may not be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR +# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE +# DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, +# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# ---------------------------------------------------------------------------- + +# Makefile for compiling usb-device-ccid-project + +#------------------------------------------------------------------------------- +# User-modifiable options +#------------------------------------------------------------------------------- + +# Chip & board used for compilation +# (can be overriden by adding CHIP=chip and BOARD=board to the command-line) +CHIP = at91sam7se512 +BOARD = at91sam7se-ek + +# Trace level used for compilation +# (can be overriden by adding TRACE_LEVEL=#number to the command-line) +# TRACE_LEVEL_DEBUG 5 +# TRACE_LEVEL_INFO 4 +# TRACE_LEVEL_WARNING 3 +# TRACE_LEVEL_ERROR 2 +# TRACE_LEVEL_FATAL 1 +# TRACE_LEVEL_NO_TRACE 0 +TRACE_LEVEL = 3 + +# Optimization level, put in comment for debugging +OPTIMIZATION = -Os + +# AT91 library directory +AT91LIB = ../at91lib + +# Output file basename +OUTPUT = usb-device-ccid-project-$(BOARD)-$(CHIP) + +# Compile for all memories available on the board (this sets $(MEMORIES)) +include $(AT91LIB)/boards/$(BOARD)/board.mak + +# Output directories +BIN = bin +OBJ = obj + +#------------------------------------------------------------------------------- +# Tools +#------------------------------------------------------------------------------- + +# Tool suffix when cross-compiling +CROSS_COMPILE = arm-none-eabi- + +# Compilation tools +CC = $(CROSS_COMPILE)gcc +SIZE = $(CROSS_COMPILE)size +STRIP = $(CROSS_COMPILE)strip +OBJCOPY = $(CROSS_COMPILE)objcopy + +# Flags +INCLUDES = -I$(AT91LIB)/boards/$(BOARD) -I$(AT91LIB)/peripherals +INCLUDES += -I$(AT91LIB)/components -I$(AT91LIB) + +CFLAGS = -Wall -mlong-calls -ffunction-sections +CFLAGS += -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL) +ASFLAGS = -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__ +LDFLAGS = -g $(OPTIMIZATION) -nostartfiles -Wl,--gc-sections + + +#------------------------------------------------------------------------------- +# Files +#------------------------------------------------------------------------------- + +# Directories where source files can be found +PERIPH = $(AT91LIB)/peripherals +BOARDS = $(AT91LIB)/boards +UTILITY = $(AT91LIB)/utility +USB = $(AT91LIB)/usb +COMP = $(AT91LIB)/components + +VPATH += $(USB)/common/core $(USB)/device/core +VPATH += $(UTILITY) +VPATH += $(PERIPH)/dbgu $(PERIPH)/pio $(PERIPH)/pit $(PERIPH)/aic $(PERIPH)/pmc +VPATH += $(PERIPH)/cp15 +VPATH += $(BOARDS)/$(BOARD) $(BOARDS)/$(BOARD)/$(CHIP) +VPATH += $(USB)/device/ccid $(COMP)/iso7816 $(PERIPH)/usart + +# Objects built from C source files +C_OBJECTS = main.o +C_OBJECTS += USBD_OTGHS.o USBD_UDP.o USBD_UDPHS.o USBDDriver.o +C_OBJECTS += USBDCallbacks_Initialized.o +C_OBJECTS += USBDCallbacks_Reset.o +#C_OBJECTS += USBDCallbacks_Resumed.o +#C_OBJECTS += USBDCallbacks_Suspended.o +C_OBJECTS += USBDDriverCb_CfgChanged.o +C_OBJECTS += USBDDriverCb_IfSettingChanged.o +C_OBJECTS += USBSetAddressRequest.o USBGenericDescriptor.o USBInterfaceRequest.o +C_OBJECTS += USBGenericRequest.o USBGetDescriptorRequest.o +C_OBJECTS += USBSetConfigurationRequest.o USBFeatureRequest.o +C_OBJECTS += USBEndpointDescriptor.o USBConfigurationDescriptor.o +C_OBJECTS += led.o math.o stdio.o +C_OBJECTS += aic.o dbgu.o pio.o pio_it.o pit.o pmc.o cp15.o +C_OBJECTS += board_memories.o board_lowlevel.o +C_OBJECTS += usart.o iso7816_4.o cciddriver.o + +# Objects built from Assembly source files +ASM_OBJECTS = board_cstartup.o +ASM_OBJECTS += cp15_asm.o + +# Append OBJ and BIN directories to output filename +OUTPUT := $(BIN)/$(OUTPUT) + +#------------------------------------------------------------------------------- +# Rules +#------------------------------------------------------------------------------- + +all: $(BIN) $(OBJ) $(MEMORIES) + +$(BIN) $(OBJ): + mkdir $@ + +define RULES +C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS)) +ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS)) + +$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1)) + $(CC) $(LDFLAGS) -T"$(AT91LIB)/boards/$(BOARD)/$(CHIP)/$$@.lds" -o $(OUTPUT)-$$@.elf $$^ + $(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin + $(SIZE) $$^ $(OUTPUT)-$$@.elf + +$$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c Makefile $(OBJ) $(BIN) + $(CC) $(CFLAGS) -D$(1) -c -o $$@ $$< + +$$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S Makefile $(OBJ) $(BIN) + $(CC) $(ASFLAGS) -D$(1) -c -o $$@ $$< + +debug_$(1): $(1) + perl ../resources/gdb/debug.pl $(OUTPUT)-$(1).elf + +endef + +$(foreach MEMORY, $(MEMORIES), $(eval $(call RULES,$(MEMORY)))) + +clean: + -rm -f $(OBJ)/*.o $(BIN)/*.bin $(BIN)/*.elf + -- cgit v1.2.3