From fca59bea770346cf1c1f9b0e00cb48a61b44a8f3 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Sun, 25 Oct 2015 21:00:20 +0100 Subject: import of old now defunct presentation slides svn repo --- .../openpcd_openpicc.mgp | 365 +++++++++++++++++++++ .../openpcd_openpicc.pdf | Bin 0 -> 32806 bytes 2 files changed, 365 insertions(+) create mode 100644 2006/openpcd_openpicc-foss.in_2006/openpcd_openpicc.mgp create mode 100644 2006/openpcd_openpicc-foss.in_2006/openpcd_openpicc.pdf (limited to '2006/openpcd_openpicc-foss.in_2006') diff --git a/2006/openpcd_openpicc-foss.in_2006/openpcd_openpicc.mgp b/2006/openpcd_openpicc-foss.in_2006/openpcd_openpicc.mgp new file mode 100644 index 0000000..bc3342e --- /dev/null +++ b/2006/openpcd_openpicc-foss.in_2006/openpcd_openpicc.mgp @@ -0,0 +1,365 @@ +%include "default.mgp" +%default 1 bgrad +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +%nodefault +%back "blue" + +%center +%size 7 +OpenPCD / OpenPICC +Free Software and Hardware for 13.56MHz RFID + +Nov 24, 2006 +FOSS.in, Bangalore + +%center +%size 4 +by + +Harald Welte +Milosch Meriac + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +Introduction + +Who is speaking to you? + an independent Free Software developer + one of the authors of Linux kernel packet filter + busy with enforcing the GPL at gpl-violations.org + working on Free Software for smartphones (openezx.org) + ...and Free Software for RFID (librfid) + ...and Free Software for ePassports (libmrtd) + ...among other things ;) + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +Introduction RFID + +Short introduction on 13.56MHz RFID systems + Magnetic Coupling + ISO 14443-A / -B (proximity IC cards) + ISO 15693 (vicinity IC cards) + Proprietary: FeliCa, Legic, Mifare Classic, ... + Applications: RFID tagging (15693), Smartcards (14443) + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +RFID Reader Designs + +Overview on available reader designs + Most readers based on ASIC (Philips, TI, ...) + Microcontroller + Readers for PC's usually have USB, RS232 or PCMCIA IF + Some reader designs with Ethernet, RS-485 + Important: If you need Mifare, you need Philips reader ASIC + Active readers implement protocols in firmware, passive in host sw + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +The OpenPCD project + +The OpenPCD project + design a RFID reader that gives full power and all interfaces + reader hardware design is under CC share alike attribution license + reader firmware and host software under GPL + use hardware that doesn't require proprietary development tools + don't license any RTOS but write everything from scratch + ability to modify firmware + can be active or passive + can produce protocol violations + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +The OpenPCD project + +The OpenPCD project + various hardware interfaces + connector for analog and digital intermediate demodulation steps + connector for firmware-configurable trigger pulse + connector for unmodulated (tx) and demodulated (rx) bitstream + RS232 (@ 3.3V) port for debug messages + versatile internal connection between ASIC and microcontroller + enables microcontroller to directly modulate carrier + using serial bitstream from SSC + using PWM signal from TC (timer/counter) unit + enables microcontroller to sample Tx and/or Rx signal + using SSC Rx + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPCD hardware configuration + +OpenPCD hardware configuration + Atmel AT91SAM7S128 microcontroller + 48MHz 32bit ARM7TDMI core + many integrated peripherals (SPI, SSC, ADC, I2C, ..) + USB full speed peripheral controller + 128kB user-programmable flash + 32kB SRAM + integrated SAM-BA emergency bootloader, enables ISP + Philips CL RC632 reader ASIC + documentation 'freely' available (40bit RC4 / 5days) + commonly used by other readers + supports 14443-A and B, including higher bitrates up to 424kBps + can be configured up to 848kBps, even though it's not guaranteed + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPCD schematics + +OpenPCD schematics + Please see the schematics in PDF form + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPCD firmware build environment + +OpenPCD firmware build environment + + Standard GNU toolchain for ARM7TDMI (armv4) + binutils-2.16.1 + gcc-4.0.2 + Custom Makefiles to create flash images + sam7utils for initial flash using SAM-BA + 'cat dfu.bin firmware.bin > foo.samba' produces SAM-BA image + Parts of newlib are linked if DEBUG=1 is used (snprintf, ...) + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPCD device firmware + +OpenPCD device firmware + since firmware is hackable, it should be easy to download a new image + USB Forum published "USB Device Firmware Upgrade" (DFU) specification + sam7dfu project (developed as part of OpenPCD) implements DFU on SAM7 + dfu-programmer (sf.net) implemented 90% of what was required on host + DFU works by switching from normal (application) mode into separate mode with its own device/configuration/endpoint descriptors + since firmware bug could render device in broken 'crashed' state, we added a button that can be pressed during power-on to force DFU mode + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPCD device firmware + +OpenPCD device firmware + The firmware build system allows for different build targets for different firmware images + Normal reader operation using librfid supported by 'main_dumbreader' target + main_librfid: Intelligent firmware with full RFID stack built-in + main_analog: Analog signals can be output on U.FL socket + main_pwm: PWM modulation of 13.56MHz carrier (variable frequency/phase) + main_reqa: Implement 14443-123 (Type A) in reader firmware, send REQA/WUPA/anticol + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPCD USB protocol + +OpenPCD USB protocol + All communication on the USB is done using a vendor-specific protocol on three endpoints (BULK OUT, BULK IN, INT IN) + All messages (usb transfers) have a common four-byte header + +%%%%%%%%I%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +main_dumbreader firmware + +OpenPCD 'main_dumbreader' firmware + The main_dumbreader firmware exports four primitives for RC632 access + read register + write register + read fifo + write fifo + Using those primitives, the full 14443-1234 A+B and 15693 can be implemented in host software (librfid) + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPCD host software (librfid) + +The librfid project + predates OpenPCD by 1.5 years + was originally written as part of the OpenMRTD project for ePassports + supported Omnikey CM5121 / CM5321 readers + OpenPCD main_dumbreader support has been added + implements 14443 -2, -3, -4 (A+B), ISO 15693, Mifare + http://openmrtd.org/projects/librfid + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPCD status + +OpenPCD status + Hardware design finished + Prototype state is over + First 40 units shipped to customers + Orders can be placed (100EUR excl. VAT) at http://shop.openpcd.org/ + DIY folks: We also sell the PCB for 18EUR :) + We have five readers with us, in case anyone is interested + +%%%%%%%%I%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +main_librfid firmware + +OpenPCD 'main_librfid' firmware + The main_librfid firmware contains the full librfid stack + offers librfid C API + allows easy port of librfid host applications into device firmware + allows OpenPCD to operate 100% autonomous + does not have a USB protocol for host applications yet + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPCD outlook + +OpenPCD outlook + main_librfid USB protocol specifications + 'bset of both worlds' approach for many applications + emulate USB-CCID profile (designed for contact based smartcard readers) + thus, OpenPCD could be used to transparently access 14443-4 (T=CL) protocol cards just like contact based smartcards + write nice frontend for Rx/Tx sampling + including software decoding on host pc to recover data + finally be able to do some cryptoanalysis on e.g. Mifare + Lots of other interesting projects + Volunteers wanted! + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +The OpenPICC project + + conterpart to OpenPCD + design RFID transponder simulator that gives full control / all interfaces + hardware schematics and software licensed like OpenPCD + based on the same microcontroller + much of the firmware (USB stack, SPI driver, ...) is shared + no ASIC's for 'transponder side' available + analog frontend and demodulator had to be built discrete, from scratch + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPICC hardware configuration + +OpenPICC hardware configuration + Atmel AT91SAM7S256 + almost 100% identical to S128 (OpenPCD) + has twice the RAM and flash + Analog antenna frontend / matching network + Diode based demodulator + Two FET and NAND based load modulation circuit + subcarrier generated in software + SSC clock rate == (2*fSubc) == 2*847.5kHz = 1.695MHz + Output of 101010 produces 847.5kHz subcarrier + two GPIO pins configure three steps of modulation depth + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPICC hardware (Rx path) + +OpenPICC hardware (Rx path) + Antenna builds resonant circuit with capacitor + low-capacity diode for demodulation + active filter + buffering/amplification + comparator for quantization of signal + resulting serial bitstream fed into SSC Rx of SAM7 + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPICC hardware (Rx path) + +OpenPICC hardware (Rx path) + Problem: bit clock regeneration + bitclock is fCarrier / 128 + PCD modulates 100% ASK => no continuous clock at PICC + Solution: + PICC needs to recover/recreate fCarrier using PLL + PLL response can be delayed via low pass + Problem: + However, PLL will drift in long sequence of bytes + Solution: + Sample-and-Hold in PLL loop can solve this problem + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPICC hardware (Rx path) + +OpenPICC hardware (Rx path) + Problem: bit clock / sample clock phase coherency + bitclock is not coherent over multiple frames + PCD can start bitclock at any fCarrier cycle + PICC needs to recover bit clock + Solution: + OpenPICC uses SAM7 Timer/Counter 0 as fCarrier divider + First falling edge of demodulated data resets counter + Therefore, sample clock is in sync with bit clock + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPICC hardware (Tx path) + +OpenPICC hardware (Tx path) + Two FET and NAND based load modulation circuit + subcarrier generated in software + SSC clock rate == (2*fSubc) == 2*847.5kHz = 1.695MHz + Output of 101010 produces 847.5kHz subcarrier + two GPIO pins configure three steps of modulation depth + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPICC USB protocol + +OpenPICC USB protocol + 100% identical to OpenPCD, just different set of commands + Most commands based on virtual register set (content: protocol params) + modulation width / depth + frame delay time for synchronous replies + encoding (manchester, OOK / NRZ-L, BPSK) + decoding (miller / NRZ) + UID for anticollision + ATQA content + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +OpenPICC status + +OpenPICC status + first prototype not yet 100% functional + still some problems with clock recovery + analog side + finished 'really soon now' (december) + first production units expected for January + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%page +OpenPCD / OpenPICC +Links + +Links + http://openpcd.org/ + http://wiki.openpcd.org/ + http://shop.openpcd.org/ + http://openmrtd.org/project/librfid/ + http://openbeacon.org/ (active 2.4GHz RFID) diff --git a/2006/openpcd_openpicc-foss.in_2006/openpcd_openpicc.pdf b/2006/openpcd_openpicc-foss.in_2006/openpcd_openpicc.pdf new file mode 100644 index 0000000..1dc34bb Binary files /dev/null and b/2006/openpcd_openpicc-foss.in_2006/openpcd_openpicc.pdf differ -- cgit v1.2.3