From 28cfd64812967818ced6e893b06a2ec77987d86e Mon Sep 17 00:00:00 2001 From: laforge Date: Sat, 27 May 2006 17:51:47 +0000 Subject: add openct patch git-svn-id: https://svn.gnumonks.org/trunk/librfid@1803 e0336214-984f-0b4b-a45f-81c69e1f0ede --- openct-cm5121-librfid.patch | 306 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 306 insertions(+) create mode 100644 openct-cm5121-librfid.patch diff --git a/openct-cm5121-librfid.patch b/openct-cm5121-librfid.patch new file mode 100644 index 0000000..1163cb6 --- /dev/null +++ b/openct-cm5121-librfid.patch @@ -0,0 +1,306 @@ +diff -Nru openct-0.6.7/src/ifd/Makefile.am openct-0.6.7-rfid/src/ifd/Makefile.am +--- openct-0.6.7/src/ifd/Makefile.am 2006-04-21 08:37:58.000000000 +0200 ++++ openct-0.6.7-rfid/src/ifd/Makefile.am 2006-05-27 19:32:21.000000000 +0200 +@@ -20,7 +20,7 @@ + ifd-wbeiuu.c \ + \ + proto-gbp.c proto-sync.c proto-t0.c proto-t1.c \ +- proto-trans.c \ ++ proto-trans.c proto-escape.c \ + \ + sys-sunray.c sys-solaris.c sys-bsd.c sys-linux.c sys-null.c sys-osx.c \ + \ +diff -Nru openct-0.6.7/src/ifd/ifd-ccid.c openct-0.6.7-rfid/src/ifd/ifd-ccid.c +--- openct-0.6.7/src/ifd/ifd-ccid.c 2006-04-24 21:52:03.000000000 +0200 ++++ openct-0.6.7-rfid/src/ifd/ifd-ccid.c 2006-05-27 19:46:29.000000000 +0200 +@@ -5,6 +5,9 @@ + * + * 2005-04-20: Harald Welte + * Add support for PCMCIA based CCID Device (CardMan 4040) ++ * ++ * 2005-05-22: Harald Welte ++ * Add suport for OmniKey Cardman 5121 RFID extensions + */ + + #include "internal.h" +@@ -122,6 +125,7 @@ + + #define SUPPORT_T0 0x1 + #define SUPPORT_T1 0x2 ++#define SUPPORT_ESCAPE 0x80 + + #define SUPPORT_50V 1 + #define SUPPORT_33V 2 +@@ -740,6 +744,12 @@ + st->reader_type = TYPE_TPDU; + } + ++ if (de.idVendor == 0x076b && de.idProduct == 0x5121) { ++ /* special handling of RFID part of OmniKey 5121 */ ++ reader->nslots++; /* one virtual slot for RFID escape */ ++ st->proto_support |= SUPPORT_ESCAPE; ++ } ++ + return 0; + } + +@@ -816,6 +826,13 @@ + int any = 0; + int i, j, bits, stat; + ++ if (st->proto_support & SUPPORT_ESCAPE ++ && slot == reader->nslots-1) { ++ ifd_debug(1, "virtual escape slot, setting card present\n"); ++ *status = IFD_CARD_PRESENT; ++ return 0; ++ } ++ + i = 1 + (slot / 4); + j = 2 * (slot % 4); + stat = 0; +@@ -880,6 +897,8 @@ + return 0; + } + ++static int ccid_set_protocol(ifd_reader_t *reader, int s, int proto); ++ + /* + * Reset + */ +@@ -898,6 +917,13 @@ + if (!(status & IFD_CARD_PRESENT)) + return IFD_ERROR_NO_CARD; + ++ if (st->proto_support & SUPPORT_ESCAPE ++ && slot == reader->nslots-1) { ++ ifd_debug(1, "slot: %d, setting atr to 0xff", slot); ++ *((char *)atr) = 0xff; ++ ccid_set_protocol(reader, slot, IFD_PROTOCOL_ESCAPE); ++ return 1; ++ } + memset(ctlbuf, 0, 3); + + n = -1; +@@ -940,6 +966,17 @@ + ifd_atr_info_t atr_info; + int r; + ++ slot = &reader->slot[s]; ++ ++ /* If we support RFID escaping, we only allow ESCAPE protocol ++ * at the last (== virtual) slot */ ++ if ((st->proto_support & SUPPORT_ESCAPE) ++ && (proto != IFD_PROTOCOL_ESCAPE) ++ && (s == reader->nslots-1)) { ++ ct_error("reader doesn't support this protocol at this slot\n"); ++ return IFD_ERROR_NOT_SUPPORTED; ++ } ++ + switch (proto) { + case IFD_PROTOCOL_T0: + if (!(st->proto_support & SUPPORT_T0)) { +@@ -953,13 +990,36 @@ + return IFD_ERROR_NOT_SUPPORTED; + } + break; ++ case IFD_PROTOCOL_ESCAPE: ++ /* virtual "escape" fallthrough protocol for stacking RFID ++ * protocol stack on top of openct */ ++ if (!(st->proto_support & SUPPORT_ESCAPE)) { ++ ct_error("reader does not support this protocol"); ++ return IFD_ERROR_NOT_SUPPORTED; ++ } ++ if (s != reader->nslots-1) { ++ ct_error("reader doesn't support this protocol at this slot"); ++ return IFD_ERROR_NOT_SUPPORTED; ++ } ++ p = ifd_protocol_new(IFD_PROTOCOL_ESCAPE,reader, slot->dad); ++ if (!p) { ++ ct_error("%s: internal error", reader->name); ++ return -1; ++ } ++ if (slot->proto) { ++ ifd_protocol_free(slot->proto); ++ slot->proto = NULL; ++ } ++ slot->proto = p; ++ st->icc_proto[s] = proto; ++ ifd_debug(1, "set protocol to ESCAPE\n"); ++ return 0; ++ break; + default: + ct_error("protocol unknown"); + return IFD_ERROR_NOT_SUPPORTED; + } + +- slot = &reader->slot[s]; +- + if (st->reader_type == TYPE_APDU) { + p = ifd_protocol_new(IFD_PROTOCOL_TRANSPARENT, + reader, slot->dad); +@@ -1103,6 +1163,27 @@ + return 0; + } + ++static int ccid_escape(ifd_reader_t *reader, int slot, void *sbuf, ++ size_t slen, void *rbuf, size_t rlen) ++{ ++ unsigned char sendbuf[CCID_MAX_MSG_LEN]; ++ unsigned char recvbuf[CCID_MAX_MSG_LEN]; ++ int r; ++ ++ ifd_debug(1, "slot: %d, slen %d, rlen %d", slot, slen, rlen); ++ ++ r = ccid_prepare_cmd(reader, sendbuf, sizeof(sendbuf), slot, ++ CCID_CMD_ESCAPE, NULL, sbuf, slen); ++ if (r < 0) ++ return r; ++ ++ r = ccid_command(reader, &sendbuf[0], r, recvbuf, sizeof(recvbuf)); ++ if (r < 0) ++ return r; ++ ++ return ccid_extract_data(&recvbuf, r, rbuf, rlen); ++} ++ + static int + ccid_transparent(ifd_reader_t * reader, int slot, + const void *sbuf, size_t slen, void *rbuf, size_t rlen) +@@ -1177,6 +1258,7 @@ + ccid_driver.transparent = ccid_transparent; + ccid_driver.send = ccid_send; + ccid_driver.recv = ccid_recv; ++ ccid_driver.escape = ccid_escape; + + ifd_driver_register("ccid", &ccid_driver); + } +diff -Nru openct-0.6.7/src/ifd/init.c openct-0.6.7-rfid/src/ifd/init.c +--- openct-0.6.7/src/ifd/init.c 2006-04-21 08:37:58.000000000 +0200 ++++ openct-0.6.7-rfid/src/ifd/init.c 2006-05-27 19:32:21.000000000 +0200 +@@ -54,6 +54,7 @@ + ifd_protocol_register(&ifd_protocol_2wire); + ifd_protocol_register(&ifd_protocol_3wire); + ifd_protocol_register(&ifd_protocol_eurochip); ++ ifd_protocol_register(&ifd_protocol_esc); + + if (ifd_conf_get_integer("debug", &ival) >= 0 && ival > ct_config.debug) + ct_config.debug = ival; +diff -Nru openct-0.6.7/src/ifd/internal.h openct-0.6.7-rfid/src/ifd/internal.h +--- openct-0.6.7/src/ifd/internal.h 2006-04-21 08:37:58.000000000 +0200 ++++ openct-0.6.7-rfid/src/ifd/internal.h 2006-05-27 19:32:21.000000000 +0200 +@@ -118,6 +118,7 @@ + extern struct ifd_protocol_ops ifd_protocol_2wire; + extern struct ifd_protocol_ops ifd_protocol_3wire; + extern struct ifd_protocol_ops ifd_protocol_eurochip; ++extern struct ifd_protocol_ops ifd_protocol_esc; + + extern void ifd_acr30u_register(void); + extern void ifd_cardman_register(void); +diff -Nru openct-0.6.7/src/ifd/proto-escape.c openct-0.6.7-rfid/src/ifd/proto-escape.c +--- openct-0.6.7/src/ifd/proto-escape.c 1970-01-01 01:00:00.000000000 +0100 ++++ openct-0.6.7-rfid/src/ifd/proto-escape.c 2006-05-27 19:32:21.000000000 +0200 +@@ -0,0 +1,77 @@ ++/* ++ * Escape protocol - simply pass everything to the reader driver's escape() ++ * ++ * This is required for exporting access to vendor-specific CCID extensions, ++ * such as the Omnikey CardMan 5121 RFID support. ++ * ++ * The higher-level applications select a virtual slot (the last available slot ++ * number). This virtual slot will automatically get the IFD_PROTOCOL_ESCAPE ++ * assgigned to it and can then be used to transceive() data to/from the CCID. ++ * ++ * It's a bit ugly, but I was unable to come up with something cleaner. ++ * ++ * Copyright (C) 2005, Harald Welte ++ */ ++ ++#include "internal.h" ++#include ++#include ++#include ++ ++static int ++escape_init(ifd_protocol_t *prot) ++{ ++ ifd_reader_t *reader = prot->reader; ++ const ifd_driver_t *drv; ++ ++ if (!reader || !(drv = reader->driver) ++ || !drv->ops || !drv->ops->escape) ++ return -1; ++ return 0; ++} ++ ++static void ++escape_release(ifd_protocol_t *prot) ++{ ++ /* NOP */ ++} ++ ++static int ++escape_set_param(ifd_protocol_t *prot, int type, long value) ++{ ++ ct_error("set_pameter not supported"); ++ return -1; ++} ++ ++static int ++escape_get_param(ifd_protocol_t *prot, int type, long *result) ++{ ++ ct_error("get_pameter not supported"); ++ return -1; ++} ++ ++static int ++escape_transceive(ifd_protocol_t *prot, int dad, ++ const void *sbuf, size_t slen, ++ void *rbuf, size_t rlen) ++{ ++ ifd_reader_t *reader = prot->reader; ++ const ifd_driver_t *drv = reader->driver; ++ ++ return drv->ops->escape(reader, dad, sbuf, slen, rbuf, rlen); ++} ++ ++struct ifd_protocol_ops ifd_protocol_esc = { ++ IFD_PROTOCOL_ESCAPE, /* id */ ++ "escape", /* name */ ++ sizeof(ifd_protocol_t), /* size */ ++ escape_init, /* init */ ++ escape_release, /* release */ ++ escape_set_param, /* set_param */ ++ escape_get_param, /* get_param */ ++ NULL, /* resynchronize */ ++ escape_transceive, /* transceive */ ++ NULL, /* sync_read */ ++ NULL, /* sync_write */ ++}; ++ +diff -Nru openct-0.6.7/src/include/openct/driver.h openct-0.6.7-rfid/src/include/openct/driver.h +--- openct-0.6.7/src/include/openct/driver.h 2006-04-21 08:37:58.000000000 +0200 ++++ openct-0.6.7-rfid/src/include/openct/driver.h 2006-05-27 19:32:21.000000000 +0200 +@@ -318,6 +318,11 @@ + int (*sync_write)(ifd_reader_t *reader, int slot, int proto, + unsigned short addr, + const unsigned char *sbuf, size_t slen); ++ ++ /*Support for transparent access to "escape" */ ++ int (*escape)(ifd_reader_t *reader, int slot, ++ void *sbuf, size_t slen, ++ void *rbuf, size_t rlen); + }; + + extern void ifd_driver_register(const char *, +diff -Nru openct-0.6.7/src/include/openct/ifd.h openct-0.6.7-rfid/src/include/openct/ifd.h +--- openct-0.6.7/src/include/openct/ifd.h 2006-04-21 08:37:58.000000000 +0200 ++++ openct-0.6.7-rfid/src/include/openct/ifd.h 2006-05-27 19:42:54.000000000 +0200 +@@ -29,6 +29,8 @@ + IFD_PROTOCOL_TLP, /* older Gemplus protocol */ + IFD_PROTOCOL_GBP, /* Gemplus block protocol */ + IFD_PROTOCOL_EUROCHIP, /* Eurochip Countercard */ ++ IFD_PROTOCOL_TCL, /* ISO 14443-4 T=CL */ ++ IFD_PROTOCOL_ESCAPE, /* Virtual 'escape' protocol */ + IFD_PROTOCOL_TRANSPARENT = 128 + }; + -- cgit v1.2.3