move to new directory

git-svn-id: https://svn.openpcd.org:2342/trunk@191 6dc7ffe9-61d6-0310-9af1-9938baff3ed1

1 files changed, 681 insertions, 0 deletions

diff --git a/firmware/src/os/dfu.c b/firmware/src/os/dfu.c
new file mode 100644
index 0000000..f2bc0ca
--- /dev/null
+++ b/firmware/src/os/dfu.c
@@ -0,0 +1,681 @@
+/* USB Device Firmware Update Implementation for OpenPCD
+ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de>
+ *
+ * This ought to be compliant to the USB DFU Spec 1.0 as available from
+ * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf
+ *
+ */
+
+#include <errno.h>
+#include <usb_ch9.h>
+#include <usb_dfu.h>
+#include <lib_AT91SAM7.h>
+
+#include <os/dfu.h>
+#include <os/pcd_enumerate.h>
+#include <os/req_ctx.h>
+#include "../openpcd.h"
+
+/* If debug is enabled, we need to access debug functions from flash
+ * and therefore have to omit flashing */
+//#define DEBUG_DFU
+
+#ifdef DEBUG_DFU
+#define DEBUGE DEBUGP
+#define DEBUGI DEBUGP
+#else
+#define DEBUGE(x, args ...) do { } while (0)
+#define DEBUGI(x, args ...) do { } while (0)
+#endif
+
+
+void __dfufunc udp_init(void)
+{
+	/* Set the PLL USB Divider */
+	AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1;
+
+	/* Enables the 48MHz USB clock UDPCK and System Peripheral USB Clock */
+	AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UDP;
+	AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_UDP);
+
+	/* Enable UDP PullUp (USB_DP_PUP) : enable & Clear of the corresponding PIO
+	 * Set in PIO mode and Configure in Output */
+	AT91F_PIO_CfgOutput(AT91C_BASE_PIOA, OPENPCD_PIO_UDP_PUP);
+}
+
+/* Send Data through the control endpoint */
+static void __dfufunc udp_ep0_send_data(const char *pData, u_int32_t length)
+{
+	AT91PS_UDP pUdp = AT91C_BASE_UDP;
+	u_int32_t cpt = 0;
+	AT91_REG csr;
+
+	DEBUGE("send_data: %u bytes ", length);
+
+	do {
+		cpt = MIN(length, 8);
+		length -= cpt;
+
+		while (cpt--)
+			pUdp->UDP_FDR[0] = *pData++;
+
+		if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) {
+			pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
+			while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) ;
+		}
+
+		pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;
+		do {
+			csr = pUdp->UDP_CSR[0];
+
+			/* Data IN stage has been stopped by a status OUT */
+			if (csr & AT91C_UDP_RX_DATA_BK0) {
+				pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0);
+				DEBUGE("stopped by status out ");
+				return;
+			}
+		} while (!(csr & AT91C_UDP_TXCOMP));
+
+	} while (length);
+
+	if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) {
+		pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
+		while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) ;
+	}
+}
+
+/* Send zero length packet through the control endpoint */
+static void __dfufunc udp_ep0_send_zlp(void)
+{
+	AT91PS_UDP pUdp = AT91C_BASE_UDP;
+	pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;
+	while (!(pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP)) ;
+	pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
+	while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) ;
+}
+
+/* Stall the control endpoint */
+static void __dfufunc udp_ep0_send_stall(void)
+{
+	AT91PS_UDP pUdp = AT91C_BASE_UDP;
+	pUdp->UDP_CSR[0] |= AT91C_UDP_FORCESTALL;
+	while (!(pUdp->UDP_CSR[0] & AT91C_UDP_ISOERROR)) ;
+	pUdp->UDP_CSR[0] &= ~(AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR);
+	while (pUdp->UDP_CSR[0] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR)) ;
+}
+
+
+static u_int8_t status;
+static u_int8_t *ptr;
+static u_int8_t dfu_state;
+
+static int __dfufunc handle_dnload(u_int16_t val, u_int16_t len)
+{
+	volatile u_int32_t *p = (volatile u_int32_t *)ptr;
+
+	DEBUGE("download ");
+
+	if (len > AT91C_IFLASH_PAGE_SIZE) {
+		/* Too big */
+	    	dfu_state = DFU_STATE_dfuERROR;
+		status = DFU_STATUS_errADDRESS;
+		udp_ep0_send_stall();
+		return -EINVAL;
+	}
+	if (len & 0x3) {
+		dfu_state = DFU_STATE_dfuERROR;
+		status = DFU_STATUS_errADDRESS;
+		udp_ep0_send_stall();
+		return -EINVAL;
+	}
+	if (len == 0) {
+		dfu_state = DFU_STATE_dfuMANIFEST_SYNC;
+		return 0;
+	}
+#if 0
+	for (i = 0; i < len/4; i++)
+		p[i] =
+#endif
+	
+	/* FIXME: get data packet from FIFO, (erase+)write flash */
+#ifndef DEBUG_DFU
+
+#endif
+
+	return 0;
+}
+
+static __dfufunc int handle_upload(u_int16_t val, u_int16_t len)
+{
+	DEBUGE("upload ");
+	if (len > AT91C_IFLASH_PAGE_SIZE
+	    || ptr > AT91C_IFLASH_SIZE) {
+		/* Too big */
+		dfu_state = DFU_STATE_dfuERROR;
+		status = DFU_STATUS_errADDRESS;
+		udp_ep0_send_stall();
+		return -EINVAL;
+	}
+
+	if (ptr + len > AT91C_IFLASH_SIZE) 
+		len = AT91C_IFLASH_SIZE - (u_int32_t) ptr;
+		
+	udp_ep0_send_data((char *)ptr, len);
+	ptr+= len;
+
+	return len;
+}
+
+static __dfufunc void handle_getstatus(void)
+{
+	struct dfu_status dstat;
+
+	DEBUGE("getstatus ");
+
+	/* send status response */
+	dstat.bStatus = status;
+	dstat.bState = dfu_state;
+	dstat.iString = 0;
+	udp_ep0_send_data((char *)&dstat, sizeof(dstat));
+}
+
+static void __dfufunc handle_getstate(void)
+{
+	u_int8_t u8 = dfu_state;
+	DEBUGE("getstate ");
+	udp_ep0_send_data((char *)&u8, sizeof(u8));
+}
+
+/* callback function for DFU requests */
+int __dfufunc dfu_ep0_handler(u_int8_t req_type, u_int8_t req,
+		    u_int16_t val, u_int16_t len)
+{
+	int rc;
+
+	DEBUGE("old_state = %u ", dfu_state);
+
+	switch (dfu_state) {
+	case DFU_STATE_appIDLE:
+		if (req != USB_REQ_DFU_DETACH)
+			goto send_stall;
+		dfu_state = DFU_STATE_appDETACH;
+		goto send_zlp;
+		break;
+	case DFU_STATE_appDETACH:
+		switch (req) {
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			dfu_state = DFU_STATE_appIDLE;
+			goto send_stall;
+			break;
+		}
+		/* FIXME: implement timer to return to appIDLE */
+		break;
+	case DFU_STATE_dfuIDLE:
+		switch (req) {
+		case USB_REQ_DFU_DNLOAD:
+			if (len == 0) {
+				dfu_state = DFU_STATE_dfuERROR;
+				goto send_stall;
+			}
+			handle_dnload(val, len);
+			break;
+		case USB_REQ_DFU_UPLOAD:
+			ptr = 0;
+			dfu_state = DFU_STATE_dfuUPLOAD_IDLE;
+			handle_upload(val, len);
+			break;
+		case USB_REQ_DFU_ABORT:
+			/* no zlp? */
+			goto send_zlp;
+			break;
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			dfu_state = DFU_STATE_dfuERROR;
+			goto send_stall;
+			break;
+		}
+		break;
+	case DFU_STATE_dfuDNLOAD_SYNC:
+		switch (req) {
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			/* FIXME: state transition depending on block completeness */
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			dfu_state = DFU_STATE_dfuERROR;
+			goto send_stall;
+		}
+		break;
+	case DFU_STATE_dfuDNBUSY:
+		dfu_state = DFU_STATE_dfuERROR;
+		goto send_stall;
+		break;
+	case DFU_STATE_dfuDNLOAD_IDLE:
+		switch (req) {
+		case USB_REQ_DFU_DNLOAD:
+			if (handle_dnload(val, len))
+			/* FIXME: state transition */
+			break;
+		case USB_REQ_DFU_ABORT:
+			dfu_state = DFU_STATE_dfuIDLE;
+			goto send_zlp;
+			break;
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			dfu_state = DFU_STATE_dfuERROR;
+			goto send_stall;
+			break;
+		}
+		break;
+	case DFU_STATE_dfuMANIFEST_SYNC:
+		switch (req) {
+		case USB_REQ_DFU_GETSTATUS:
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			dfu_state = DFU_STATE_dfuERROR;
+			goto send_stall;
+			break;
+		}
+		break;
+	case DFU_STATE_dfuMANIFEST:
+		dfu_state = DFU_STATE_dfuERROR;
+		goto send_stall;
+		break;
+	case DFU_STATE_dfuMANIFEST_WAIT_RST:
+		/* we should never go here */
+		break;
+	case DFU_STATE_dfuUPLOAD_IDLE:
+		switch (req) {
+		case USB_REQ_DFU_UPLOAD:
+			/* state transition if less data then requested */
+			rc = handle_upload(val, len);
+			if (rc >= 0 && rc < len)
+				dfu_state = DFU_STATE_dfuIDLE;
+			break;
+		case USB_REQ_DFU_ABORT:
+			dfu_state = DFU_STATE_dfuIDLE;
+			/* no zlp? */
+			goto send_zlp;
+			break;
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			dfu_state = DFU_STATE_dfuERROR;
+			goto send_stall;
+			break;
+		}
+		break;
+	case DFU_STATE_dfuERROR:
+		switch (req) {
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		case USB_REQ_DFU_CLRSTATUS:
+			dfu_state = DFU_STATE_dfuIDLE;
+			/* no zlp? */
+			goto send_zlp;
+			break;
+		default:
+			dfu_state = DFU_STATE_dfuERROR;
+			goto send_stall;
+			break;
+		}
+		break;
+	}
+
+	DEBUGE("OK new_state = %u\r\n", dfu_state);
+	return 0;
+
+send_stall:
+	udp_ep0_send_stall();
+	DEBUGE("STALL new_state = %u\r\n", dfu_state);
+	return -EINVAL;
+
+send_zlp:
+	udp_ep0_send_zlp();
+	DEBUGE("ZLP new_state = %u\r\n", dfu_state);
+	return 0;
+}
+static u_int8_t cur_config;
+
+/* USB DFU Device descriptor in DFU mode */
+__dfustruct const struct usb_device_descriptor dfu_dev_descriptor = {
+	.bLength		= USB_DT_DEVICE_SIZE,
+	.bDescriptorType	= USB_DT_DEVICE,
+	.bcdUSB			= 0x0100,
+	.bDeviceClass		= 0x00,
+	.bDeviceSubClass	= 0x00,
+	.bDeviceProtocol	= 0x00,
+	.bMaxPacketSize0	= 8,
+	.idVendor		= OPENPCD_VENDOR_ID,
+	.idProduct		= OPENPCD_PRODUCT_ID,
+	.bcdDevice		= 0x0000,
+	.iManufacturer		= 0x00,
+	.iProduct		= 0x00,
+	.iSerialNumber		= 0x00,
+	.bNumConfigurations	= 0x01,
+};
+
+/* USB DFU Config descriptor in DFU mode */
+__dfustruct const struct _dfu_desc dfu_cfg_descriptor = {
+	.ucfg = {
+		.bLength = USB_DT_CONFIG_SIZE,
+		.bDescriptorType = USB_DT_CONFIG,
+		.wTotalLength = USB_DT_CONFIG_SIZE + 
+				2* USB_DT_INTERFACE_SIZE +
+				USB_DT_DFU_SIZE,
+		.bNumInterfaces = 1,
+		.bConfigurationValue = 1,
+		.iConfiguration = 0,
+		.bmAttributes = USB_CONFIG_ATT_ONE,
+		.bMaxPower = 100,
+		},
+	.uif[0] = {
+		.bLength		= USB_DT_INTERFACE_SIZE,
+		.bDescriptorType	= USB_DT_INTERFACE,
+		.bInterfaceNumber	= 0x00,
+		.bAlternateSetting	= 0x00,
+		.bNumEndpoints		= 0x00,
+		.bInterfaceClass	= 0xfe,
+		.bInterfaceSubClass	= 0x01,
+		.bInterfaceProtocol	= 0x02,
+		.iInterface		= 0,
+		}, 
+	.uif[1] = {
+		.bLength		= USB_DT_INTERFACE_SIZE,
+		.bDescriptorType	= USB_DT_INTERFACE,
+		.bInterfaceNumber	= 0x00,
+		.bAlternateSetting	= 0x01,
+		.bNumEndpoints		= 0x00,
+		.bInterfaceClass	= 0xfe,
+		.bInterfaceSubClass	= 0x01,
+		.bInterfaceProtocol	= 0x02,
+		.iInterface		= 0,
+		}, 
+
+	.func_dfu = DFU_FUNC_DESC,
+};
+
+
+/* minimal USB EP0 handler in DFU mode */
+static __dfufunc void dfu_udp_ep0_handler(void)
+{
+	AT91PS_UDP pUDP = AT91C_BASE_UDP;
+	u_int8_t bmRequestType, bRequest;
+	u_int16_t wValue, wIndex, wLength, wStatus;
+	u_int32_t csr = pUDP->UDP_CSR[0];
+
+	DEBUGE("CSR=0x%04x ", csr);
+
+	if (csr & AT91C_UDP_STALLSENT) {
+		DEBUGE("ACK_STALLSENT ");
+		pUDP->UDP_CSR[0] = ~AT91C_UDP_STALLSENT;
+	}
+
+	if (csr & AT91C_UDP_RX_DATA_BK0) {
+		DEBUGE("ACK_BANK0 ");
+		pUDP->UDP_CSR[0] &= ~AT91C_UDP_RX_DATA_BK0;
+	}
+
+	if (!(csr & AT91C_UDP_RXSETUP)) {
+		DEBUGE("no setup packet ");
+		return;
+	}
+
+	DEBUGE("len=%d ", csr >> 16);
+	if (csr >> 16  == 0) {
+		DEBUGE("empty packet ");
+		return;
+	}
+
+	bmRequestType = pUDP->UDP_FDR[0];
+	bRequest = pUDP->UDP_FDR[0];
+	wValue = (pUDP->UDP_FDR[0] & 0xFF);
+	wValue |= (pUDP->UDP_FDR[0] << 8);
+	wIndex = (pUDP->UDP_FDR[0] & 0xFF);
+	wIndex |= (pUDP->UDP_FDR[0] << 8);
+	wLength = (pUDP->UDP_FDR[0] & 0xFF);
+	wLength |= (pUDP->UDP_FDR[0] << 8);
+
+	DEBUGE("bmRequestType=0x%2x ", bmRequestType);
+
+	if (bmRequestType & 0x80) {
+		DEBUGE("DATA_IN=1 ");
+		pUDP->UDP_CSR[0] |= AT91C_UDP_DIR;
+		while (!(pUDP->UDP_CSR[0] & AT91C_UDP_DIR)) ;
+	}
+	pUDP->UDP_CSR[0] &= ~AT91C_UDP_RXSETUP;
+	while ((pUDP->UDP_CSR[0] & AT91C_UDP_RXSETUP)) ;
+
+	/* Handle supported standard device request Cf Table 9-3 in USB
+	 * speciication Rev 1.1 */
+	switch ((bRequest << 8) | bmRequestType) {
+	case STD_GET_DESCRIPTOR:
+		DEBUGE("GET_DESCRIPTOR ");
+		if (wValue == 0x100) {
+			/* Return Device Descriptor */
+			udp_ep0_send_data((const char *) 
+					  &dfu_dev_descriptor,
+					  MIN(sizeof(dfu_dev_descriptor),
+					      wLength));
+		} else if (wValue == 0x200) {
+			/* Return Configuration Descriptor */
+			udp_ep0_send_data((const char *)
+					  &dfu_cfg_descriptor,
+					  MIN(sizeof(dfu_cfg_descriptor),
+					      wLength));
+#if 0
+		} else if (wValue == 0x400) {
+			/* Return Interface descriptor */
+			if (wIndex != 0x01)
+				udp_ep0_send_stall();
+			udp_ep0_send_data((const char *) 
+					  &dfu_if_descriptor,
+					  MIN(sizeof(dfu_if_descriptor),
+					      wLength));
+#endif
+		} else
+			udp_ep0_send_stall();
+		break;
+	case STD_SET_ADDRESS:
+		DEBUGE("SET_ADDRESS ");
+		udp_ep0_send_zlp();
+		pUDP->UDP_FADDR = (AT91C_UDP_FEN | wValue);
+		pUDP->UDP_GLBSTATE = (wValue) ? AT91C_UDP_FADDEN : 0;
+		break;
+	case STD_SET_CONFIGURATION:
+		DEBUGE("SET_CONFIG ");
+		if (wValue)
+			DEBUGE("VALUE!=0 ");
+		cur_config = wValue;
+		udp_ep0_send_zlp();
+		pUDP->UDP_GLBSTATE =
+		    (wValue) ? AT91C_UDP_CONFG : AT91C_UDP_FADDEN;
+		pUDP->UDP_CSR[1] =
+		    (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT) :
+		    0;
+		pUDP->UDP_CSR[2] =
+		    (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN) : 0;
+		pUDP->UDP_CSR[3] =
+		    (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN) : 0;
+		pUDP->UDP_IER = (AT91C_UDP_EPINT0|AT91C_UDP_EPINT1|
+				 AT91C_UDP_EPINT2|AT91C_UDP_EPINT3);
+		break;
+	case STD_GET_CONFIGURATION:
+		DEBUGE("GET_CONFIG ");
+		udp_ep0_send_data((char *)&(cur_config),
+				   sizeof(cur_config));
+		break;
+	case STD_GET_STATUS_ZERO:
+		DEBUGE("GET_STATUS_ZERO ");
+		wStatus = 0;
+		udp_ep0_send_data((char *)&wStatus, sizeof(wStatus));
+		break;
+	case STD_GET_STATUS_INTERFACE:
+		DEBUGE("GET_STATUS_INTERFACE ");
+		wStatus = 0;
+		udp_ep0_send_data((char *)&wStatus, sizeof(wStatus));
+		break;
+	case STD_GET_STATUS_ENDPOINT:
+		DEBUGE("GET_STATUS_ENDPOINT(EPidx=%u) ", wIndex&0x0f);
+		wStatus = 0;
+		wIndex &= 0x0F;
+		if ((pUDP->UDP_GLBSTATE & AT91C_UDP_CONFG) && (wIndex == 0)) {
+			wStatus =
+			    (pUDP->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1;
+			udp_ep0_send_data((char *)&wStatus,
+					   sizeof(wStatus));
+		} else if ((pUDP->UDP_GLBSTATE & AT91C_UDP_FADDEN)
+			   && (wIndex == 0)) {
+			wStatus =
+			    (pUDP->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1;
+			udp_ep0_send_data((char *)&wStatus,
+					   sizeof(wStatus));
+		} else
+			udp_ep0_send_stall();
+		break;
+	case STD_SET_FEATURE_ZERO:
+		DEBUGE("SET_FEATURE_ZERO ");
+		udp_ep0_send_stall();
+		break;
+	case STD_SET_FEATURE_INTERFACE:
+		DEBUGE("SET_FEATURE_INTERFACE ");
+		udp_ep0_send_zlp();
+		break;
+	case STD_SET_FEATURE_ENDPOINT:
+		DEBUGE("SET_FEATURE_ENDPOINT ");
+		udp_ep0_send_stall();
+		break;
+	case STD_CLEAR_FEATURE_ZERO:
+		DEBUGE("CLEAR_FEATURE_ZERO ");
+		udp_ep0_send_stall();
+		break;
+	case STD_CLEAR_FEATURE_INTERFACE:
+		DEBUGE("CLEAR_FEATURE_INTERFACE ");
+		udp_ep0_send_zlp();
+		break;
+	case STD_CLEAR_FEATURE_ENDPOINT:
+		DEBUGE("CLEAR_FEATURE_ENDPOINT(EPidx=%u) ", wIndex & 0x0f);
+		udp_ep0_send_stall();
+		break;
+	case STD_SET_INTERFACE:
+		DEBUGE("SET INTERFACE ");
+		udp_ep0_send_stall();
+		break;
+	default:
+		DEBUGE("DEFAULT(req=0x%02x, type=0x%02x) ", bRequest, bmRequestType);
+		if ((bmRequestType & 0x3f) == USB_TYPE_DFU) {
+			dfu_ep0_handler(bmRequestType, bRequest, wValue, wLength);
+		} else
+			udp_ep0_send_stall();
+		break;
+	}
+}
+
+/* minimal USB IRQ handler in DFU mode */
+static __dfufunc void dfu_udp_irq(void)
+{
+	AT91PS_UDP pUDP = AT91C_BASE_UDP;
+	AT91_REG isr = pUDP->UDP_ISR;
+
+	if (isr & AT91C_UDP_ENDBUSRES) {
+		pUDP->UDP_IER = AT91C_UDP_EPINT0;
+		/* reset all endpoints */
+		pUDP->UDP_RSTEP = (unsigned int)-1;
+		pUDP->UDP_RSTEP = 0;
+		/* Enable the function */
+		pUDP->UDP_FADDR = AT91C_UDP_FEN;
+		/* Configure endpoint 0 */
+		pUDP->UDP_CSR[0] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL);
+		cur_config = 0;
+	}
+
+	if (isr & AT91C_UDP_EPINT0)
+		dfu_udp_ep0_handler();
+
+	/* clear all interrupts */
+	pUDP->UDP_ICR = isr;
+
+	AT91F_AIC_ClearIt(AT91C_BASE_AIC, AT91C_ID_UDP);
+}
+
+/* this is only called once before DFU mode, no __dfufunc required */
+static void dfu_switch(void)
+{
+	AT91PS_AIC pAic = AT91C_BASE_AIC;
+
+	DEBUGE("Switching to DFU mode ");
+
+	pAic->AIC_SVR[AT91C_ID_UDP] = (unsigned int) &dfu_udp_irq;
+	dfu_state = DFU_STATE_dfuIDLE;
+}
+
+void __dfufunc dfu_main(void)
+{
+	udp_init();
+
+	/* This implements 
+	AT91F_AIC_ConfigureIt(AT91C_BASE_AIC, AT91C_ID_UDP,
+			      OPENPCD_IRQ_PRIO_UDP,
+			      AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL, dfu_udp_irq);
+	*/
+	AT91PS_AIC pAic = AT91C_BASE_AIC;
+	pAic->AIC_IDCR = 1 << AT91C_ID_UDP;
+	pAic->AIC_SVR[AT91C_ID_UDP] = (unsigned int) &dfu_udp_irq;
+	pAic->AIC_SMR[AT91C_ID_UDP] = AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL | 
+					OPENPCD_IRQ_PRIO_UDP;
+	pAic->AIC_ICCR = 1 << AT91C_ID_UDP;
+
+	AT91F_AIC_EnableIt(AT91C_BASE_AIC, AT91C_ID_UDP);
+
+	/* End-of-Bus-Reset is always enabled */
+
+	/* Clear for set the Pull up resistor */
+	AT91F_PIO_SetOutput(AT91C_BASE_PIOA, OPENPCD_PIO_UDP_PUP);
+
+	/* do nothing, since all of DFU is interrupt driven */
+	while (1) ;
+}
+
+const struct dfuapi __dfufunctab dfu_api = {
+	.ep0_send_data		= &udp_ep0_send_data,
+	.ep0_send_zlp		= &udp_ep0_send_zlp,
+	.ep0_send_stall		= &udp_ep0_send_stall,
+	.dfu_ep0_handler	= &dfu_ep0_handler,
+	.dfu_switch		= &dfu_switch,
+	.dfu_state		= &dfu_state,
+	.dfu_dev_descriptor	= &dfu_dev_descriptor,
+	.dfu_cfg_descriptor	= &dfu_cfg_descriptor,
+};
+
+/* just for testing */
+int foo = 12345;