diff options
| -rw-r--r-- | openpcd/firmware/src/main_reqa.c | 32 | ||||
| -rw-r--r-- | openpcd/firmware/src/rfid_layer2_iso14443a.c | 2 |
2 files changed, 31 insertions, 3 deletions
diff --git a/openpcd/firmware/src/main_reqa.c b/openpcd/firmware/src/main_reqa.c index 5d7c80b..7f75e97 100644 --- a/openpcd/firmware/src/main_reqa.c +++ b/openpcd/firmware/src/main_reqa.c @@ -35,9 +35,12 @@ void _init_func(void) #define MODE_REQA 0x01 #define MODE_WUPA 0x02 #define MODE_ANTICOL 0x03 +#define MODE_14443A 0x04 static volatile int mode = MODE_REQA; +static const char frame_14443a[] = { 0x00, 0xff, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66 }; + static void reg_inc(u_int8_t reg) { u_int8_t val; @@ -56,10 +59,12 @@ static void reg_dec(u_int8_t reg) static u_int8_t ana_out_sel; static u_int8_t mfout_sel; +static u_int8_t speed_idx; static void help(void) { DEBUGPCR("r: REQA w: WUPA a: ANTICOL\r\n" + "A: 14443A +: inc speed -: dec speed\r\n" "y: inc cw cond x: dec cond c: inc mod cond"); DEBUGPCR("v: dec mod cond o: dec ana_out p: dec ana_out\r\n" "h: trigger high l: trigger low u: dec MFOUT mode"); @@ -84,13 +89,15 @@ int _main_dbgu(char key) case 'w': mode = MODE_WUPA; break; + case 'A': + mode = MODE_14443A; + break; case 'a': mode = MODE_ANTICOL; break; /* Those below don't work as long as * iso14443a_init() is called before * every cycle */ - case 'y': reg_inc(RC632_REG_CW_CONDUCTANCE); break; @@ -157,6 +164,14 @@ int _main_dbgu(char key) cdiv_idx++; tc_cdiv_set_divider(cdivs[cdiv_idx]); break; + case '-': + if (speed_idx > 0) + speed_idx--; + break; + case '+': + if (speed_idx < 3) + speed_idx++; + break; default: return -EINVAL; } @@ -208,12 +223,25 @@ void _main_func(void) DEBUGPCRF("received WUPA: %s", hexdump((char *)&atqa, sizeof(atqa))); break; case MODE_ANTICOL: - status = iso14443a_anticol(&l2h); + status = rfid_layer2_iso14443a.fn.open(&l2h); if (status < 0) DEBUGPCR("error during anticol"); else DEBUGPCR("Anticol OK"); break; + case MODE_14443A: + { + char rx_buf[4]; + int rx_len = sizeof(rx_buf); + rfid_layer2_iso14443a.fn.setopt(&l2h, RFID_OPT_14443A_SPEED_RX, + &speed_idx, sizeof(speed_idx)); + rfid_layer2_iso14443a.fn.setopt(&l2h, RFID_OPT_14443A_SPEED_TX, + &speed_idx, sizeof(speed_idx)); + rfid_layer2_iso14443a.fn.transceive(&l2h, RFID_14443A_FRAME_REGULAR, + &frame_14443a, sizeof(frame_14443a), + &rx_buf, &rx_len, 1, 0); + } + break; } if (status < 0) diff --git a/openpcd/firmware/src/rfid_layer2_iso14443a.c b/openpcd/firmware/src/rfid_layer2_iso14443a.c index 2dbc09b..80d9d5f 100644 --- a/openpcd/firmware/src/rfid_layer2_iso14443a.c +++ b/openpcd/firmware/src/rfid_layer2_iso14443a.c @@ -96,7 +96,7 @@ set_bit_in_field(unsigned char *bitfield, unsigned int bit) DEBUGP("%p = 0x%02x\n", (bitfield+byte_count), *(bitfield+byte_count)); } -int +static int iso14443a_anticol(struct rfid_layer2_handle *handle) { int ret; |