summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--openpcd/firmware/Makefile4
-rw-r--r--openpcd/firmware/include/openpcd.h19
-rw-r--r--openpcd/firmware/src/dbgu.c37
-rw-r--r--openpcd/firmware/src/dbgu.h11
-rw-r--r--openpcd/firmware/src/led.c61
-rw-r--r--openpcd/firmware/src/led.h9
-rw-r--r--openpcd/firmware/src/main.c94
-rw-r--r--openpcd/firmware/src/openpcd.h12
-rw-r--r--openpcd/firmware/src/pcd_enumerate.c10
-rw-r--r--openpcd/firmware/src/rc632.c51
-rw-r--r--openpcd/firmware/src/rc632.h2
-rw-r--r--openpcd/firmware/src/rc632_debug.c30
-rw-r--r--openpcd/firmware/src/rc632_debug.h6
13 files changed, 291 insertions, 55 deletions
diff --git a/openpcd/firmware/Makefile b/openpcd/firmware/Makefile
index 1882fe9..f9f81fc 100644
--- a/openpcd/firmware/Makefile
+++ b/openpcd/firmware/Makefile
@@ -70,7 +70,7 @@ SRC =
# List C source files here which must be compiled in ARM-Mode.
# use file-extension c for "c-only"-files
-SRCARM = lib/lib_AT91SAM7S64.c src/pcd_enumerate.c src/fifo.c src/dbgu.c src/rc632.c src/$(TARGET).c compil/SrcWinARM/Cstartup_SAM7.c
+SRCARM = lib/lib_AT91SAM7S64.c src/pcd_enumerate.c src/fifo.c src/dbgu.c src/led.c src/rc632.c src/rc632_debug.c src/$(TARGET).c compil/SrcWinARM/Cstartup_SAM7.c
# List C++ source files here.
# use file-extension cpp for C++-files (use extension .cpp)
@@ -134,7 +134,7 @@ AT91LIBNOWARN = yes
CSTANDARD = -std=gnu99
# Place -D or -U options for C here
-CDEFS = -D$(RUN_MODE)
+CDEFS = -D$(RUN_MODE) -DDEBUG -DOLIMEX
# Place -I options here
CINCS = -Ihelper -Isrc
diff --git a/openpcd/firmware/include/openpcd.h b/openpcd/firmware/include/openpcd.h
index dd68d52..cd85af2 100644
--- a/openpcd/firmware/include/openpcd.h
+++ b/openpcd/firmware/include/openpcd.h
@@ -1,9 +1,24 @@
#ifndef _OPENPCD_H
#define _OPENPCD_H
+#include <include/types.h>
#include <include/AT91SAM7S64.h>
-#define OPENPCD_RC632_IRQ AT91C_ID_IRQ1
-#define OPENPCD_RC632_RESET AT91C_PIO_PA29
+struct openpcd_hdr {
+ u_int8_t cmd; /* command */
+ u_int8_t flags;
+ u_int8_t reg; /* register */
+ u_int8_t val; /* value (in case of write *) */
+ u_int16_t len;
+ u_int8_t data[0];
+} __attribute__ ((packed));
+
+#define OPENPCD_CMD_WRITE_REG 0x01
+#define OPENPCD_CMD_WRITE_FIFO 0x02
+#define OPENPCD_CMD_WRITE_VFIFO 0x03
+#define OPENPCD_CMD_READ_REG 0x11
+#define OPENPCD_CMD_READ_FIFO 0x12
+#define OPENPCD_CMD_READ_VFIFO 0x13
+#define OPENPCD_CMD_SET_LED 0x21
#endif
diff --git a/openpcd/firmware/src/dbgu.c b/openpcd/firmware/src/dbgu.c
index 8e95202..7c94141 100644
--- a/openpcd/firmware/src/dbgu.c
+++ b/openpcd/firmware/src/dbgu.c
@@ -19,6 +19,7 @@
// Include Standard files
#include "Board.h"
#include "dbgu.h"
+#include "rc632_debug.h"
#define USART_SYS_LEVEL 4
/*---------------------------- Global Variable ------------------------------*/
//*--------------------------1--------------------------------------------------
@@ -68,6 +69,22 @@ static void DBGU_irq_handler(void)
// Reset Application
Send_reset();
break;
+ case '2':
+ AT91F_DBGU_Printk("Toggling LED 1\n\r");
+ led_toggle(1);
+ break;
+ case '3':
+ AT91F_DBGU_Printk("Toggling LED 2\n\r");
+ led_toggle(2);
+ break;
+ case '4':
+ AT91F_DBGU_Printk("Testing RC632 : ");
+ if (rc632_test() == 0)
+ AT91F_DBGU_Printk("SUCCESS!\n\r");
+ else
+ AT91F_DBGU_Printk("ERROR!\n\r");
+
+ break;
default:
AT91F_DBGU_Printk("\n\r");
break;
@@ -184,3 +201,23 @@ void AT91F_DBGU_scanf(char *type, unsigned int *val)
} //* End
#endif
+
+#ifdef DEBUG
+#include <stdio.h>
+#include <stdarg.h>
+#include <string.h>
+static char dbg_buf[256];
+void debugp(const char *format, ...)
+{
+ va_list ap;
+
+ va_start(ap, format);
+ vsnprintf(dbg_buf, sizeof(dbg_buf)-1, format, ap);
+ va_end(ap);
+
+ dbg_buf[sizeof(dbg_buf)-1] = '\0'; \
+ AT91F_DBGU_Printk(dbg_buf); \
+}
+#endif
+
+
diff --git a/openpcd/firmware/src/dbgu.h b/openpcd/firmware/src/dbgu.h
index 69c4997..8f7f0a4 100644
--- a/openpcd/firmware/src/dbgu.h
+++ b/openpcd/firmware/src/dbgu.h
@@ -15,11 +15,9 @@
#ifndef dbgu_h
#define dbgu_h
-#include <stdio.h>
-
#define AT91C_DBGU_BAUD 115200
-#define DEBUGP(x) AT91F_DBGU_Printk(x)
+//#define DEBUGP(x) AT91F_DBGU_Printk(x)
//* ----------------------- External Function Prototype -----------------------
@@ -31,4 +29,11 @@ int AT91F_DBGU_Get( char *val);
void AT91F_DBGU_scanf(char * type,unsigned int * val);
#endif
+#ifdef DEBUG
+extern void debugp(const char *format, ...);
+#define DEBUGP(x, args ...) debugp(x, ## args)
+#else
+#define DEBUGP(x, args ...)
+#endif
+
#endif /* dbgu_h */
diff --git a/openpcd/firmware/src/led.c b/openpcd/firmware/src/led.c
new file mode 100644
index 0000000..7f5db72
--- /dev/null
+++ b/openpcd/firmware/src/led.c
@@ -0,0 +1,61 @@
+
+#include <include/types.h>
+#include <include/lib_AT91SAM7S64.h>
+#include "openpcd.h"
+#include "dbgu.h"
+
+static int led2port(int led)
+{
+ if (led == 1)
+ return OPENPCD_LED1;
+ else if (led == 2)
+ return OPENPCD_LED2;
+ else
+ return -1;
+}
+
+void led_switch(int led, int on)
+{
+ int port = led2port(led);
+
+ if (port == -1)
+ return;
+
+ if (on)
+ AT91F_PIO_ClearOutput(AT91C_BASE_PIOA, port);
+ else
+ AT91F_PIO_SetOutput(AT91C_BASE_PIOA, port);
+}
+
+int led_get(int led)
+{
+ int port = led2port(led);
+
+ if (port == -1)
+ return -1;
+
+ return !(AT91F_PIO_GetOutputDataStatus(AT91C_BASE_PIOA) & port);
+}
+
+int led_toggle(int led)
+{
+ int on = led_get(led);
+ if (on == -1)
+ return -1;
+
+ if (on) {
+ DEBUGP("led%d on, switching off\r\n", led);
+ led_switch(led, 0);
+ } else {
+ DEBUGP("led%d off, switching on\r\n", led);
+ led_switch(led, 1);
+ }
+}
+
+void led_init(void)
+{
+ AT91F_PIO_CfgOutput(AT91C_BASE_PIOA, OPENPCD_LED1);
+ AT91F_PIO_CfgOutput(AT91C_BASE_PIOA, OPENPCD_LED2);
+ led_switch(1, 0);
+ led_switch(2, 0);
+}
diff --git a/openpcd/firmware/src/led.h b/openpcd/firmware/src/led.h
new file mode 100644
index 0000000..394107b
--- /dev/null
+++ b/openpcd/firmware/src/led.h
@@ -0,0 +1,9 @@
+#ifndef _LED_H
+#define _LED_H
+
+extern void led_init(void);
+extern void led_switch(int led, int on);
+extern int led_get(int led);
+extern int led_toggle(int led);
+
+#endif
diff --git a/openpcd/firmware/src/main.c b/openpcd/firmware/src/main.c
index 2a569d4..a7e3171 100644
--- a/openpcd/firmware/src/main.c
+++ b/openpcd/firmware/src/main.c
@@ -17,8 +17,13 @@
//* 1.4 27/Apr/05 JPP : Unset the USART_COM and suppress displaying data
//*--------------------------------------------------------------------------------------
+#include <errno.h>
+#include <string.h>
#include <include/lib_AT91SAM7S64.h>
+#include <include/openpcd.h>
#include "dbgu.h"
+#include "rc632.h"
+#include "led.h"
#include "pcd_enumerate.h"
#define MSG_SIZE 1000
@@ -51,21 +56,65 @@ static void AT91F_USB_Open(void)
AT91F_CDC_Open(AT91C_BASE_UDP);
}
-//*--------------------------------------------------------------------------------------
-//* Function Name : main
-//* Object :
-//*--------------------------------------------------------------------------------------
+static int usb_in(int len)
+{
+ struct openpcd_hdr *poh;
+ struct openpcd_hdr *pih;
+ u_int16_t data_len;
+
+ if (len < sizeof(*poh))
+ return -EINVAL;
+
+ //data_len = ntohs(poh->len);
+
+ memcpy(pih, poh, sizeof(*poh));
+
+ switch (poh->cmd) {
+ case OPENPCD_CMD_WRITE_REG:
+ DEBUGP("WRITE_REG ");
+ rc632_reg_write(poh->reg, poh->val);
+ break;
+ case OPENPCD_CMD_WRITE_FIFO:
+ DEBUGP("WRITE FIFO ");
+ if (len - sizeof(*poh) < data_len)
+ return -EINVAL;
+ rc632_fifo_write(data_len, poh->data);
+ break;
+ case OPENPCD_CMD_WRITE_VFIFO:
+ DEBUGP("WRITE VFIFO ");
+ break;
+ case OPENPCD_CMD_READ_REG:
+ DEBUGP("READ REG ");
+ pih->val = rc632_reg_read(poh->reg);
+ break;
+ case OPENPCD_CMD_READ_FIFO:
+ DEBUGP("READ FIFO ");
+ pih->len = rc632_fifo_read(poh->len, pih->data);
+ break;
+ case OPENPCD_CMD_READ_VFIFO:
+ DEBUGP("READ VFIFO ");
+ break;
+ case OPENPCD_CMD_SET_LED:
+ DEBUGP("SET LED ");
+ led_switch(poh->reg, poh->val);
+ break;
+ default:
+ return -EINVAL;
+ }
+}
+
int main(void)
{
- char data[MSG_SIZE];
- unsigned int length;
+ int i, state = 0;
- char message[30];
// Init trace DBGU
AT91F_DBGU_Init();
AT91F_DBGU_Printk
- ("\n\r-I- Basic USB loop back\n\r 0) Set Pull-UP 1) Clear Pull UP\n\r");
+ ("\n\r-I- OpenPCD USB loop back\n\r 0) Set Pull-UP 1) Clear Pull UP\n\r");
+ led_init();
+ rc632_init();
+
//printf("test 0x%02x\n\r", 123);
// Enable User Reset and set its minimal assertion to 960 us
@@ -79,24 +128,17 @@ int main(void)
while (1) {
// Check enumeration
if (AT91F_UDP_IsConfigured()) {
-#if 0
-#ifndef USART_COM
- // Loop
- length = AT91F_CDC_Read(&pCDC, data, MSG_SIZE);
- pCDC.Write(&pCDC, data, length);
- /// mt sprintf(message,"-I- Len %d:\n\r",length);
- siprintf(message, "-I- Len %d:\n\r", length);
- // send char
- AT91F_DBGU_Frame(message);
-#else
- // Loop
- length = pCDC.Read(&pCDC, data, MSG_SIZE);
- data[length] = 0;
- Trace_Toggel_LED(LED1);
- AT91F_US_Put(data);
- /// AT91F_DBGU_Frame(data);
-#endif
-#endif
+
+ }
+ if (state == 0) {
+ led_switch(1, 1);
+ led_switch(2, 0);
+ state = 1;
+ } else {
+ led_switch(1, 0);
+ led_switch(2, 1);
+ state = 0;
}
+ for (i = 0; i < 0x7fffff; i++) {}
}
}
diff --git a/openpcd/firmware/src/openpcd.h b/openpcd/firmware/src/openpcd.h
index 9f723da..40cc44a 100644
--- a/openpcd/firmware/src/openpcd.h
+++ b/openpcd/firmware/src/openpcd.h
@@ -1,10 +1,16 @@
#ifndef _OPENPCD_H
#define _OPENPCD_H
-#define OPENPCD_RC632_IRQ AT91C_PA30_IRQ1
+#ifdef OLIMEX
+#define OPENPCD_LED1 AT91C_PIO_PA18
+#define OPENPCD_LED2 AT91C_PIO_PA17
+#else
+#define OPENPCD_LED1 AT91C_PIO_PA25
+#define OPENPCD_LED2 AT91C_PIO_PA26
+#endif
+
+#define OPENPCD_RC632_IRQ AT91C_ID_IRQ1
#define OPENPCD_RC632_RESET AT91C_PIO_PA29
-#define OPENPCD_LED1_GREEN AT91C_PIO_PA25
-#define OPENPCD_LED2_RED AT91C_PIO_PA26
#define MAX_REQSIZE 256
#define MAX_HDRSIZE 8
diff --git a/openpcd/firmware/src/pcd_enumerate.c b/openpcd/firmware/src/pcd_enumerate.c
index 46b2763..a8f55e3 100644
--- a/openpcd/firmware/src/pcd_enumerate.c
+++ b/openpcd/firmware/src/pcd_enumerate.c
@@ -25,8 +25,6 @@
#include "pcd_enumerate.h"
#include "dbgu.h"
-static char dbg_buf[256];
-
static struct _AT91S_CDC pCDC;
static AT91PS_CDC pCdc = &pCDC;
@@ -140,10 +138,7 @@ static void udp_irq(void)
AT91PS_UDP pUDP = pCDC.pUdp;
AT91_REG isr = pUDP->UDP_ISR;
- sprintf(dbg_buf, "udp_irq(imr=0x%04x, isr=0x%04x): ", pUDP->UDP_IMR, isr);
- DEBUGP(dbg_buf);
-
- //DEBUGP("udp_irq: ");
+ DEBUGP("udp_irq(imr=0x%04x, isr=0x%04x): ", pUDP->UDP_IMR, isr);
AT91F_AIC_ClearIt(AT91C_BASE_AIC, AT91C_ID_UDP);
@@ -342,8 +337,7 @@ static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, u_int32_t len
u_int32_t cpt = 0;
AT91_REG csr;
- sprintf(dbg_buf, "send_data: %u bytes ", length);
- DEBUGP(dbg_buf);
+ DEBUGP("send_data: %u bytes ", length);
do {
cpt = MIN(length, 8);
diff --git a/openpcd/firmware/src/rc632.c b/openpcd/firmware/src/rc632.c
index 0de7765..4961a6b 100644
--- a/openpcd/firmware/src/rc632.c
+++ b/openpcd/firmware/src/rc632.c
@@ -18,14 +18,16 @@ static void spi_irq(void)
{
u_int32_t status = pSPI->SPI_SR;
- DEBUGP("spi_irq: ");
+ DEBUGP("spi_irq: 0x%08x", status);
+
+ AT91F_AIC_ClearIt(AT91C_BASE_AIC, AT91C_ID_SPI);
if (status & AT91C_SPI_OVRES)
DEBUGP("Overrun detected ");
if (status & AT91C_SPI_MODF)
DEBUGP("Mode Fault detected ");
- DEBUGP("\n");
+ DEBUGP("\r\n");
}
/* stupid polling transceiver routine */
@@ -39,16 +41,28 @@ static int spi_transceive(const u_int8_t *tx_data, u_int16_t tx_len,
*rx_len = 0;
}
+ AT91F_SPI_Enable(pSPI);
while (1) {
u_int32_t sr = pSPI->SPI_SR;
- if (sr & AT91C_SPI_TDRE)
+ DEBUGP("SPI_SR 0x%08x\r\n", sr);
+ if (sr & AT91C_SPI_TDRE) {
+ DEBUGP("TDRE, sending byte\r\n");
pSPI->SPI_TDR = tx_data[tx_cur++];
+ }
if (rx_len && *rx_len < rx_len_max) {
- if (sr & AT91C_SPI_RDRF)
+ if (sr & AT91C_SPI_RDRF) {
+ DEBUGP("RDRF, reading byte\r\n");
rx_data[(*rx_len)++] = pSPI->SPI_RDR;
+ }
+ }
+ if (tx_cur >= tx_len) {
+ if (!rx_len)
+ return 0;
+
+ if (*rx_len >= tx_len)
+ return 0;
}
- if (tx_cur >= tx_len)
- return 0;
+
}
return 0;
}
@@ -180,22 +194,36 @@ void rc632_reset(void)
void rc632_init(void)
{
- fifo_init(&rc632.fifo, 256, NULL, &rc632);
+ //fifo_init(&rc632.fifo, 256, NULL, &rc632);
+ DEBUGP("rc632_pmc\r\n");
AT91F_SPI_CfgPMC();
- AT91F_SPI_CfgPIO(); /* check whether we really need all this */
- AT91F_SPI_Enable(pSPI);
+ DEBUGP("rc632_pio\r\n");
+ AT91F_PIO_CfgPeriph(AT91C_BASE_PIOA,
+ AT91C_PA11_NPCS0|AT91C_PA12_MISO|
+ AT91C_PA13_MOSI |AT91C_PA14_SPCK, 0);
+
+ DEBUGP("rc632_en_spi\r\n");
+ //AT91F_SPI_Enable(pSPI);
+
+ DEBUGP("rc632_cfg_it_spi\r\n");
AT91F_AIC_ConfigureIt(AT91C_BASE_AIC, AT91C_ID_SPI, AT91C_AIC_PRIOR_LOWEST,
AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL, &spi_irq);
+ DEBUGP("rc632_en_it_spi\r\n");
AT91F_AIC_EnableIt(AT91C_BASE_AIC, AT91C_ID_SPI);
- AT91F_SPI_EnableIt(pSPI, AT91C_SPI_MODF|AT91C_SPI_OVRES);
+ DEBUGP("rc632_spi_en_it\r\n");
+ //AT91F_SPI_EnableIt(pSPI, AT91C_SPI_MODF|AT91C_SPI_OVRES|AT91C_SPI_RDRF|AT91C_SPI_TDRE);
+ DEBUGP("rc632_spi_cfg_mode\r\n");
AT91F_SPI_CfgMode(pSPI, AT91C_SPI_MSTR|AT91C_SPI_PS_FIXED);
/* CPOL = 0, NCPHA = 1, CSAAT = 0, BITS = 0000, SCBR = 10 (4.8MHz),
* DLYBS = 0, DLYBCT = 0 */
+ DEBUGP("rc632_spi_cfg_cs\r\n");
AT91F_SPI_CfgCs(pSPI, 0, AT91C_SPI_BITS_8|AT91C_SPI_NCPHA|(10<<8));
- AT91F_SPI_Reset(pSPI);
+
+ //DEBUGP("rc632_spi_reset\r\n");
+ //AT91F_SPI_Reset(pSPI);
/* Register rc632_irq */
AT91F_AIC_ConfigureIt(AT91C_BASE_AIC, AT91C_ID_IRQ1, AT91C_AIC_PRIOR_LOWEST,
@@ -204,6 +232,7 @@ void rc632_init(void)
AT91F_PIO_CfgOutput(AT91C_BASE_PIOA, OPENPCD_RC632_RESET);
+ DEBUGP("rc632_reset\r\n");
rc632_reset();
};
diff --git a/openpcd/firmware/src/rc632.h b/openpcd/firmware/src/rc632.h
index 281e757..bd82c03 100644
--- a/openpcd/firmware/src/rc632.h
+++ b/openpcd/firmware/src/rc632.h
@@ -1,6 +1,8 @@
#ifndef _RC623_API_H
#define _RC632_API_H
+#include <include/types.h>
+
extern void rc632_write_reg(u_int8_t addr, u_int8_t data);
extern void rc632_write_fifo(u_int8_t len, u_int8_t *data);
extern u_int8_t rc632_read_reg(u_int8_t addr);
diff --git a/openpcd/firmware/src/rc632_debug.c b/openpcd/firmware/src/rc632_debug.c
new file mode 100644
index 0000000..fae9b2b
--- /dev/null
+++ b/openpcd/firmware/src/rc632_debug.c
@@ -0,0 +1,30 @@
+
+#include "rc632.h"
+#include "dbgu.h"
+#include <include/cl_rc632.h>
+
+#ifdef DEBUG
+static int rc632_reg_write_verify(u_int8_t reg, u_int8_t val)
+{
+ u_int8_t tmp;
+
+ rc632_reg_write(reg, val);
+ tmp = rc632_reg_read(reg);
+
+ DEBUGP("reg=0x%02x, write=0x%02x, read=0x%02x ", reg, val, tmp);
+
+ return (val == tmp);
+}
+
+int rc632_test(void)
+{
+ if (rc632_reg_write_verify(RC632_REG_MOD_WIDTH, 0x55) != 1)
+ return -1;
+
+ if (rc632_reg_write_verify(RC632_REG_MOD_WIDTH, 0xAA) != 1)
+ return -1;
+
+ return 0;
+}
+
+#endif
diff --git a/openpcd/firmware/src/rc632_debug.h b/openpcd/firmware/src/rc632_debug.h
new file mode 100644
index 0000000..26f341a
--- /dev/null
+++ b/openpcd/firmware/src/rc632_debug.h
@@ -0,0 +1,6 @@
+#ifndef _RC632_DEBUG_H
+#define _RC632_DEBUG_H
+
+extern int rc632_test(void);
+
+#endif
personal git repositories of Harald Welte. Your mileage may vary