summaryrefslogtreecommitdiff
path: root/firmware/src
diff options
context:
space:
mode:
Diffstat (limited to 'firmware/src')
-rw-r--r--firmware/src/dfu/dfu.c16
1 files changed, 14 insertions, 2 deletions
diff --git a/firmware/src/dfu/dfu.c b/firmware/src/dfu/dfu.c
index 8425c28..e126539 100644
--- a/firmware/src/dfu/dfu.c
+++ b/firmware/src/dfu/dfu.c
@@ -69,6 +69,8 @@
#define led2on() AT91F_PIO_ClearOutput(AT91C_BASE_PIOA, OPENPCD_PIO_LED2)
#define led2off() AT91F_PIO_SetOutput(AT91C_BASE_PIOA, OPENPCD_PIO_LED2)
+static int past_manifest = 0;
+
static void __dfufunc udp_init(void)
{
/* Set the PLL USB Divider */
@@ -486,7 +488,16 @@ int __dfufunc dfu_ep0_handler(u_int8_t req_type, u_int8_t req,
case DFU_STATE_dfuMANIFEST:
switch (req) {
case USB_REQ_DFU_GETSTATUS:
+ /* we don't want to change to WAIT_RST, as it
+ * would mean that we can not support another
+ * DFU transaction before doing the actual
+ * reset. Instead, we switch to idle and note
+ * that we've already been through MANIFST in
+ * the global variable 'past_manifest'.
+ */
+ //dfu_state = DFU_STATE_dfuMANIFEST_WAIT_RST;
dfu_state = DFU_STATE_dfuIDLE;
+ past_manifest = 1;
handle_getstatus();
break;
case USB_REQ_DFU_GETSTATE:
@@ -858,12 +869,13 @@ static __dfufunc void dfu_udp_irq(void)
cur_config = 0;
if (dfu_state == DFU_STATE_dfuMANIFEST_WAIT_RST ||
- dfu_state == DFU_STATE_dfuMANIFEST) {
+ dfu_state == DFU_STATE_dfuMANIFEST ||
+ past_manifest) {
+ /* reset back into the main application */
AT91F_RSTSoftReset(AT91C_BASE_RSTC, AT91C_RSTC_PROCRST|
AT91C_RSTC_PERRST|
AT91C_RSTC_EXTRST);
}
-
}
if (isr & AT91C_UDP_EPINT0)
personal git repositories of Harald Welte. Your mileage may vary