diff options
Diffstat (limited to 'openpicc/application')
| -rw-r--r-- | openpicc/application/cmd.c | 7 | ||||
| -rw-r--r-- | openpicc/application/main.c | 10 | ||||
| -rw-r--r-- | openpicc/application/ssc.c | 3 | ||||
| -rw-r--r-- | openpicc/application/tc_sniffer.c | 143 | ||||
| -rw-r--r-- | openpicc/application/tc_sniffer.h | 7 | ||||
| -rw-r--r-- | openpicc/application/usb_print.c | 11 | ||||
| -rw-r--r-- | openpicc/application/usb_print.h | 1 |
7 files changed, 174 insertions, 8 deletions
diff --git a/openpicc/application/cmd.c b/openpicc/application/cmd.c index 47bbec5..50b59d3 100644 --- a/openpicc/application/cmd.c +++ b/openpicc/application/cmd.c @@ -21,6 +21,7 @@ #include "ssc.h" #include "usb_print.h" #include "load_modulation.h" +#include "tc_sniffer.h" xQueueHandle xCmdQueue; xTaskHandle xCmdTask; @@ -45,7 +46,7 @@ static const portBASE_TYPE USE_COLON_FOR_LONG_COMMANDS = 0; /* When not USE_COLON_FOR_LONG_COMMANDS then short commands will be recognized by including * their character in the string SHORT_COMMANDS * */ -static const char *SHORT_COMMANDS = "!pc+-l?hq9fjka#i"; +static const char *SHORT_COMMANDS = "!prc+-l?hq9fjka#i"; /* Note that the long/short command distinction only applies to the USB serial console * */ @@ -241,6 +242,9 @@ void prvExecCommand(u_int32_t cmd, portCHAR *args) { case 'P': print_pio(); break; + case 'R': + start_stop_sniffing(); + break; case 'C': DumpStringToUSB( " *****************************************************\n\r" @@ -442,6 +446,7 @@ void prvExecCommand(u_int32_t cmd, portCHAR *args) { " * # - switch clock\n\r" " * l - cycle LEDs\n\r" " * p - print PIO pins\n\r" + " * r - start/stop receiving\n\r" " * z 0/1- enable or disable tc_cdiv_sync\n\r" " * i - inhibit/uninhibit PLL\n\r" " * ! - reset tc_cdiv_sync\n\r" diff --git a/openpicc/application/main.c b/openpicc/application/main.c index 2397c61..9b81aea 100644 --- a/openpicc/application/main.c +++ b/openpicc/application/main.c @@ -51,6 +51,7 @@ #include "iso14443_sniffer.h" #include "iso14443a_pretender.h" #include "decoder.h" +#include "tc_sniffer.h" static inline int detect_board(void) { @@ -210,9 +211,12 @@ int main (void) NULL, TASK_ISO_PRIORITY, NULL);*/ /*xTaskCreate (iso14443_sniffer, (signed portCHAR *) "ISO14443-SNIFF", TASK_ISO_STACK, NULL, TASK_ISO_PRIORITY, NULL);*/ - xTaskCreate (iso14443a_pretender, (signed portCHAR *) "ISO14443A-PRETEND", TASK_ISO_STACK, - NULL, TASK_ISO_PRIORITY, NULL); - + /*xTaskCreate (iso14443a_pretender, (signed portCHAR *) "ISO14443A-PRETEND", TASK_ISO_STACK, + NULL, TASK_ISO_PRIORITY, NULL);*/ + xTaskCreate (tc_sniffer, (signed portCHAR *) "RFID-SNIFFER", TASK_ISO_STACK, + NULL, TASK_ISO_PRIORITY, NULL); + + xTaskCreate (vUSBCDCTask, (signed portCHAR *) "USB", TASK_USB_STACK, NULL, TASK_USB_PRIORITY, NULL); diff --git a/openpicc/application/ssc.c b/openpicc/application/ssc.c index 50d416b..a490d42 100644 --- a/openpicc/application/ssc.c +++ b/openpicc/application/ssc.c @@ -43,9 +43,6 @@ #define PRINT_DEBUG 0 -// BROKEN Old FIQ code -int ssc_tx_pending=0, ssc_tx_fiq_fdt_cdiv=0, ssc_tx_fiq_fdt_ssc=0; - struct _ssc_handle { enum ssc_mode mode; const struct openpicc_hardware *openpicc; diff --git a/openpicc/application/tc_sniffer.c b/openpicc/application/tc_sniffer.c new file mode 100644 index 0000000..abf04c0 --- /dev/null +++ b/openpicc/application/tc_sniffer.c @@ -0,0 +1,143 @@ +/*************************************************************** + * + * OpenPICC - T/C based dumb sniffer + * + * TC2 will reset its value on each falling edge of SSC_DATA, we + * will have the FIQ store the TC2 value on each rising edge of + * SSC_DATA. This will give us a count of carrier cycles between + * modulation pauses which should be enough information to decode + * the modified miller encoding. + * + * Copyright 2008 Henryk Plötz <henryk@ploetzli.ch> + * + *************************************************************** + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + +*/ + +#include <FreeRTOS.h> +#include <openpicc.h> +#include <task.h> +#include <string.h> + +#include <USB-CDC.h> + +#include "tc_sniffer.h" +#include "load_modulation.h" +#include "pll.h" +#include "tc_fdt.h" +#include "usb_print.h" +#include "cmd.h" +#include "pio_irq.h" + +/* Problem: We want to receive data from the FIQ without locking (the FIQ must not be blocked ever) + * Strategy: Double buffering. + */ + +#define BUFSIZE 1024 +#define WAIT_TICKS (20*portTICK_RATE_MS) +typedef struct { + u_int32_t count; + u_int32_t data[BUFSIZE]; +} fiq_buffer_t; +fiq_buffer_t fiq_buffers[2]; + +fiq_buffer_t *tc_sniffer_next_buffer_for_fiq = 0; + +portBASE_TYPE currently_sniffing = 0; +enum { NONE, REQUEST_START, REQUEST_STOP } request_change = NONE; + +#define MIN(a, b) ((a)>(b)?(b):(a)) +void flush_buffer(fiq_buffer_t *buffer) +{ + /* Write all data from the given buffer out, then zero the count */ + if(buffer->count > 0) { + vUSBSendBuffer_blocking((unsigned char*)(&(buffer->data[0])), 0, MIN(buffer->count,BUFSIZE)*4, WAIT_TICKS); + if(buffer->count >= BUFSIZE) + vUSBSendBuffer_blocking((unsigned char*)"////", 0, 4, WAIT_TICKS); + else + vUSBSendBuffer_blocking((unsigned char*)"____", 0, 4, WAIT_TICKS); + buffer->count = 0; + } +} + +void start_stop_sniffing(void) +{ + if(currently_sniffing) + request_change = REQUEST_STOP; + else + request_change = REQUEST_START; +} + +void tc_sniffer (void *pvParameters) +{ + (void)pvParameters; + + /* Disable load modulation circuitry + * (Must be done explicitly, because the default state is pull-up high, leading + * to a constant modulation output which prevents reception. I've been bitten by + * this more than once.) + */ + load_mod_init(); + load_mod_level(0); + + pll_init(); + pll_inhibit(0); + + tc_fdt_init(); + + memset(fiq_buffers, 0, sizeof(fiq_buffers)); + + /* Wait for the USB and CMD threads to start up */ + vTaskDelay(1000 * portTICK_RATE_MS); + + // The change interrupt is going to be handled by the FIQ + AT91F_PIO_CfgInput(AT91C_BASE_PIOA, OPENPICC_SSC_DATA); + pio_irq_enable(OPENPICC_SSC_DATA); + + int current = 0; + while(1) { + /* Main loop of the sniffer */ + + if(currently_sniffing) { + int next = (current+1)%(sizeof(fiq_buffers)/sizeof(fiq_buffers[0])); + flush_buffer( &fiq_buffers[next] ); + /* The buffer designated by next is now empty, give it to the fiq, + * we'll just guess that this write is atomic */ + tc_sniffer_next_buffer_for_fiq = &fiq_buffers[current=next]; + + if(request_change == REQUEST_STOP) { + currently_sniffing = 0; + request_change = NONE; + + tc_sniffer_next_buffer_for_fiq = 0; + memset(fiq_buffers, 0, sizeof(fiq_buffers)); + current = 0; + vUSBSendBuffer_blocking((unsigned char *)"----", 0, 4, WAIT_TICKS); + usb_print_set_force_silence(0); + } else vTaskDelay(2* portTICK_RATE_MS); + } else { + // Do nothing, wait longer + + if(request_change == REQUEST_START) { + // Prevent usb_print code from barging in + usb_print_set_force_silence(1); + vUSBSendBuffer_blocking((unsigned char *)"----", 0, 4, WAIT_TICKS); + currently_sniffing = 1; + request_change = NONE; + } else vTaskDelay(100 * portTICK_RATE_MS); + } + } +} diff --git a/openpicc/application/tc_sniffer.h b/openpicc/application/tc_sniffer.h new file mode 100644 index 0000000..e3a1c29 --- /dev/null +++ b/openpicc/application/tc_sniffer.h @@ -0,0 +1,7 @@ +#ifndef TC_SNIFFER_H_ +#define TC_SNIFFER_H_ + +extern void tc_sniffer (void *pvParameters); +extern void start_stop_sniffing (void); + +#endif /*TC_SNIFFER_H_*/ diff --git a/openpicc/application/usb_print.c b/openpicc/application/usb_print.c index 5ff42b8..5e4372b 100644 --- a/openpicc/application/usb_print.c +++ b/openpicc/application/usb_print.c @@ -29,7 +29,7 @@ static char ringbuffer[BUFLEN]; static int ringstart, ringstop; -static int default_flush = 1; +static int default_flush = 1, forced_silence = 0; static xSemaphoreHandle print_semaphore; void usb_print_buffer(const char* buffer, int start, int stop) { @@ -92,11 +92,20 @@ int usb_print_set_default_flush(int flush) return old_flush; } +int usb_print_set_force_silence(int silence) +{ + int old_silence = forced_silence; + forced_silence = silence; + return old_silence; +} + /* Must NOT be called from ISR context */ void usb_print_flush(void) { int oldstop, newstart; + if(forced_silence) return; + taskENTER_CRITICAL(); if(print_semaphore == NULL) usb_print_init(); diff --git a/openpicc/application/usb_print.h b/openpicc/application/usb_print.h index 9186dc9..0497146 100644 --- a/openpicc/application/usb_print.h +++ b/openpicc/application/usb_print.h @@ -10,6 +10,7 @@ extern int usb_print_char_f(const char c, int flush); extern void usb_print_flush(void); extern int usb_print_get_default_flush(void); extern int usb_print_set_default_flush(int flush); +extern int usb_print_set_force_silence(int silence); extern void usb_print_init(void); #endif /*USB_PRINT_H_*/ |