summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* ISO7816: Properly handle T=0 only cards without TCK in ATRHarald Welte2011-08-161-1/+13
* SIMTRACE UART: Reset error status on error related IRQHarald Welte2011-08-151-0/+9
* simtrace UART: set INACK flag to make sure we ignore any parity errorHarald Welte2011-08-151-3/+3
* DBGU: Print Reset controller Status Register on bootHarald Welte2011-08-151-0/+4
* USB: Add support for the 3rd DFU interface (RAM)Harald Welte2011-08-151-0/+6
* add simtrace README fileHarald Welte2011-07-301-0/+9
* Merge branch 'simtrace'Harald Welte2011-07-3038-65/+1870
|\
| * update mkcompile_h to work with git repositoryHarald Welte2011-07-302-4/+155
| * DFU: Fix execution of software that was loaded to RAM via DFUv0.1Harald Welte2011-07-301-8/+17
| * DFU: Support re-flashing of DFU via DFUHarald Welte2011-07-302-18/+134
| * DFU: add third 'alternate configuration' for RAM loadHarald Welte2011-07-308-10/+36
| * simtrace: add some early spi flash utility routinesHarald Welte2011-07-303-1/+225
| * Makefile: SIMtrace uses SAM7S128, not 256Harald Welte2011-07-302-2/+2
| * add new RUN_FROM_RAM run-mode for direct DFU-to-RAM supportHarald Welte2011-07-304-3/+99
| * use gcc/ld flags -ffunction-sections and --gc-sectionsHarald Welte2011-07-304-17/+17
| * sam7dfu: update copyright yearsHarald Welte2011-07-291-1/+1
| * sam7dfu: make sure we can use USB reset to get from DFU -> APPHarald Welte2011-07-291-2/+14
| * USB driver: use the DFU-provided function to send EP0 dataHarald Welte2011-07-071-48/+1
| * dfu: fix EP0 IN trasnfers that are even multiple of 8Harald Welte2011-07-071-4/+14
| * simtrace: initialize sniffer mode right after start-upHarald Welte2011-06-301-18/+22
| * simtrace: switch VCC_SIM into output mode, as we use it to supply VccHarald Welte2011-06-211-2/+8
| * simtrace: add VCC_PHINE IRQ detectionHarald Welte2011-06-211-0/+19
| * simtrace: use better names for GPIO linesHarald Welte2011-06-211-4/+5
| * simtrace: introduce mode sniffer / mitm switchingHarald Welte2011-06-174-8/+74
| * simtrace: add support for the analog bus switchHarald Welte2011-06-165-3/+96
| * simtrace: add more definitions regarding real hw prototypeHarald Welte2011-06-164-1/+32
| * update USB strings (company name and some copy+paste mistakes)Harald Welte2011-06-152-3/+3
| * typo: Fix typo, transform reqyests to requests.Holger Hans Peter Freyther2011-01-317-7/+7
| * vsprintf.c: Fix compilation by including limits.hHolger Hans Peter Freyther2011-01-311-0/+1
| * add missing usb_strings_dfu.txt file to simtrace directoryHarald Welte2010-12-091-0/+5
| * AT91SAM7.h: Fix computation of AT91C_IFLASH_LOCK_REGION_SIZEHarald Welte2010-11-211-1/+1
| * simtrace: Make sure ATR is sent in its own RCTX and we re-allocate in timeHarald Welte2010-11-211-1/+11
| * simtrace: Commit Makefile changes to support build of simtrace WARNINGHarald Welte2010-11-182-6/+18
| * req_ctx: Increase size of small req_ctx to 128 and have 16 instead of 8Harald Welte2010-11-182-3/+3
| * ausb: fix interrupt URB callbackHarald Welte2010-11-181-2/+14
| * simtrace: fix problems causing bogus waiting time expirationsHarald Welte2010-11-181-1/+5
| * simtrace: Introduce code for proper handling of PTS / PPSHarald Welte2010-11-181-12/+148
| * simtrace: add TC based waiting time counter, signal ATR / expiry via USBHarald Welte2010-11-187-80/+316
| * ausb: make ausb_test compile againHarald Welte2010-11-152-2/+2
| * simtrace: introduce RST pin handlingHarald Welte2010-11-141-12/+32
| * Initial version of a SAM7 USART based ISO7816-3 T=0 snifferHarald Welte2010-11-146-2/+529
* | USB driver: use the DFU-provided function to send EP0 dataHarald Welte2011-07-071-48/+1
* | dfu: fix EP0 IN trasnfers that are even multiple of 8Harald Welte2011-07-071-4/+14
* | typo: Fix typo, transform reqyests to requests.Holger Hans Peter Freyther2011-01-316-6/+6
* | ausb: fix interrupt URB callbackHarald Welte2010-11-181-2/+14
* | ausb: make ausb_test compile againHarald Welte2010-11-182-2/+2
|/
* enable USB string descriptorsHarald Welte2010-11-141-1/+1
* disable USB EP0 debuggingHarald Welte2010-11-141-1/+1
* Use smaller number of request contexts on a SAM64Harald Welte2010-11-131-0/+5
* On the Olimex board, the buttons are low-activeHarald Welte2010-11-131-1/+7
personal git repositories of Harald Welte. Your mileage may vary