summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* anticol working more often nowhenryk2008-03-042-0/+7
* Pretender does now do anticol. At least in some cases.henryk2008-03-031-47/+48
* Sending seems to be reliable now.henryk2008-03-034-14/+63
* Implement transmissionhenryk2008-03-0310-43/+495
* Forgotten include filehenryk2008-03-021-0/+96
* Add pwm led code from sniffonly branchhenryk2008-03-014-19/+128
* New cleaned-up (and then messed up again) SSC codehenryk2008-02-2918-1098/+943
* Add information about new hardware patchlevelhenryk2008-02-292-3/+19
* * move usb descriptors into separate file (src/os/usb_descriptors_openpcd.h)laforge2008-02-237-98/+556
* Modifications to USB code to allow blocks of more than 1 byte to be more effi...henryk2008-02-202-7/+34
* allow GETSTATE and GETSTATUS requests in MANIFEST state (compatibility with d...laforge2008-02-171-3/+19
* fix USB strings: OpenPCD is a RFID Reader, not a simulatorlaforge2008-02-172-2/+2
* Framework to support run-time hardware selection. Future hardware releases sh...henryk2008-02-1111-73/+149
* Add command to toggle PLL inhibitionhenryk2008-02-113-1/+13
* Remove old OpenBeacon remnantshenryk2008-02-091-28/+0
* Commit a first version of an iso 14443 layer 2 and a passive sniffer. Works f...henryk2008-02-098-46/+389
* add rc632 eeprom write functionlaforge2008-02-081-0/+51
* add more rc632 register definitions (from librfid)laforge2008-02-081-4/+38
* update README with correct compile instrucitons, refer to wikilaforge2008-02-081-1/+6
* Factor out time print code and enhance ithenryk2008-02-032-12/+29
* Change order on these two because otherwise unloading while IRQs are still en...henryk2008-02-031-1/+1
* Commit status quo. Partly or severely broken.henryk2008-02-026-14/+36
* make sure librfid is used when compiling main_mifarelaforge2008-01-221-0/+4
* Use finer grained #ifdef's for the new board's featureshenryk2007-12-214-5/+15
* Add SSC_DATA_GATE supporthenryk2007-12-204-3/+34
* New hardware versionhenryk2007-12-195-9/+55
* Play with transfer sizeshenryk2007-12-193-10/+68
* Optimizing (disabling debugging reduces time spent in decoder from 460us to 60ushenryk2007-12-171-20/+43
* That comment is not true anymorehenryk2007-12-161-6/+1
* Get SSC_MODE_14443A workinghenryk2007-12-163-9/+28
* Record size of SSC RX DMA buffers in transfers, much clearerhenryk2007-12-157-20/+89
* Standard state is still idlehenryk2007-12-151-2/+2
* Further the distinction between SSC and PDC transfersizehenryk2007-12-155-18/+24
* Prepare generic ISO 14443A reception mode (no short/standard distinction), pr...henryk2007-12-154-25/+51
* Implement unrolled loop, have not yet measured performancehenryk2007-12-151-59/+42
* Fix consistency checkhenryk2007-12-153-19/+21
* Sanitize and clarify the len handling in rx buffers.henryk2007-12-145-28/+44
* Add complicated mechanism that should have brought clock cycle accurate measu...henryk2007-12-122-3/+38
* Add new miller decoder (not working yet)henryk2007-12-129-35/+187
* Some more delayhenryk2007-12-111-3/+5
* Several modifications to enable spinning until the correct phase is reached i...henryk2007-12-119-34/+92
* Clean up SSC performance metric reportinghenryk2007-12-094-21/+47
* Prevent late frames by spinning in SSC CP0 IRQ till end of short frame receptionhenryk2007-12-095-9/+43
* Make it possible to send long frames for debugginghenryk2007-12-094-36/+82
* Change parity storage in frame structhenryk2007-12-092-3/+4
* Count and print late frameshenryk2007-12-094-3/+57
* inlined miller bit decode functionmeri2007-12-061-1/+1
* Fix stupid buffer leakage code in standard modehenryk2007-12-062-3/+5
* Obsolete commenthenryk2007-12-051-2/+0
* Add a kludge to make repetitive sends working. For some obscure reason the fi...henryk2007-12-052-0/+6
personal git repositories of Harald Welte. Your mileage may vary