openpcd - Firmware for the OpenPCD, OpenPICC and SIMtrace hardware

	Commit message (Expand)	Author	Age	Files	Lines
...
*	some initial code for PICC side	(no author)	2006-08-23	6	-0/+423
*	fix ACK_BANK0 case of control transfer (missing ampersand)	(no author)	2006-08-23	1	-1/+1
*	usb benchmarking firmware	(no author)	2006-08-22	1	-0/+69
*	fix comment	(no author)	2006-08-20	1	-1/+2
*	- main_reqa: add mode to send deterministic ISO14443A frame	(no author)	2006-08-20	2	-3/+31
*	add some code for new TC2 based FDT timer	(no author)	2006-08-17	2	-1/+38
*	disable linux memcpy implementation because of missing alignment traps	(no author)	2006-08-17	1	-1/+2
*	- introduce ALWAYS_RESPOND #define to determine whether we should always send	(no author)	2006-08-16	1	-2/+8
*	use attribute(packed) for 14443B structures, where apropriate	(no author)	2006-08-16	1	-2/+2
*	- make USB IRQ Debug conditional to DEBUG_UDP_IRQ #define	(no author)	2006-08-16	1	-19/+29
*	add OPENPC_REG_MAX definition	(no author)	2006-08-16	1	-0/+2
*	- move usb incoming packet handling into respective subsystems	(no author)	2006-08-16	10	-131/+276
*	add properties to ignore .lst files	(no author)	2006-08-16	0	-0/+0
*	some more hardware docs	(no author)	2006-08-16	7	-0/+0
*	add new openpcd shell program (unfinished)	(no author)	2006-08-16	13	-2/+6719
*	- remove local copy of openpcd.h, use the one from firmware instead	(no author)	2006-08-11	3	-40/+4
*	add REG_MAX definition	(no author)	2006-08-11	1	-0/+2
*	remove four bytes (2* u_int16_t) from every 'sctruct openpcd_hdr'	(no author)	2006-08-11	3	-24/+25
*	fix some compiler warnings, enable -Wall	(no author)	2006-08-10	2	-4/+5
*	- add my ausb library code for async usb handling	(no author)	2006-08-10	10	-136/+838
*	add DEBUG=1 doc	(no author)	2006-08-09	1	-0/+2
*	don't disable librfid part	(no author)	2006-08-09	1	-1/+1
*	remove unneeded routines	(no author)	2006-08-09	1	-569/+0
*	- import some more low-level routines from linux kenrel arm port to save	(no author)	2006-08-09	9	-11/+1802
*	add unthrottling call	(no author)	2006-08-08	1	-0/+3
*	- import some more library functions from linux kernel	(no author)	2006-08-08	6	-55/+749
*	add automatic throttling and manual un-throttling support	(no author)	2006-08-08	2	-1/+13
*	enable PDC Rx before trying to use it	(no author)	2006-08-08	1	-0/+2
*	prevent CARRIER_DIV_HELP from becoming permanently zero	(no author)	2006-08-08	1	-2/+8
*	Add SSC rx support to PWM firmware, so we can sample what we output ;)	(no author)	2006-08-08	1	-15/+59
*	add SSC code	(no author)	2006-08-08	3	-1/+171
*	major rework of carrier division signals:	(no author)	2006-08-08	3	-17/+30
*	add missing prototype	(no author)	2006-08-08	1	-0/+1
*	don't configure SSC relevant pins in RC632 code	(no author)	2006-08-08	1	-3/+0
*	move more usb related handling into usb_handler.c	(no author)	2006-08-08	2	-15/+20
*	split usb handling from dumbreader main program	(no author)	2006-08-08	4	-129/+158
*	fixup-commit to last one: main_reqa supports TC, not main_pwm.	(no author)	2006-08-08	2	-29/+30
*	add TC code for software-configurable division of carrier clock	(no author)	2006-08-08	4	-4/+127
*	add some more state and PIO constants	(no author)	2006-08-08	1	-0/+6
*	make trigger pulse a bit 'longer'	(no author)	2006-08-08	1	-0/+3
*	- add support for MFOUT and Analog Test switching	(no author)	2006-08-03	1	-5/+65
*	- add some more debugging code	(no author)	2006-08-03	1	-20/+42
*	- fix prototype in header	(no author)	2006-08-03	2	-1/+4
*	fix help message	(no author)	2006-08-03	1	-8/+8
*	add new PWM main program	(no author)	2006-08-03	1	-0/+198
*	- change from PA23 to PA0	(no author)	2006-08-03	1	-8/+28
*	add support for conductance register change via serial port	(no author)	2006-08-03	1	-1/+33
*	add code for PWM controller	(no author)	2006-08-03	3	-1/+106
*	cosmetic cleanup	(no author)	2006-07-30	2	-121/+90
*	add new WUPA and ANTICOL modes	(no author)	2006-07-30	1	-7/+63