openpcd - Firmware for the OpenPCD, OpenPICC and SIMtrace hardware

	Commit message (Expand)	Author	Age	Files	Lines
*	fix completely broken logic of processing pending outbound packets. We now do	laforge	2006-09-22	1	-17/+5
*	fix a wrong memset length (we want length of atqa, not length of the pointer ...	laforge	2006-09-22	1	-1/+1
*	DFU works (fix various bugs such as forgetting to shift the page number, chec...	laforge	2006-09-21	7	-93/+176
*	some code cleanup	laforge	2006-09-21	1	-7/+15
*	use POSITIVE_EDGE as a workaround to the irq storm if HIGH_LEVEL is used. Th...	laforge	2006-09-21	1	-1/+5
*	add some debugging output to flash_page()	laforge	2006-09-21	1	-1/+6
*	add dfu flash header file	laforge	2006-09-20	1	-0/+4
*	- add support for flashing to DFU	laforge	2006-09-20	4	-54/+59
*	re-set SAK during every chaining iteration (Henryk Ploetz)	laforge	2006-09-20	1	-0/+1
*	- Add OpenPICC register definition (and USB command handling)	laforge	2006-09-20	28	-186/+486
*	- fix linker scripts and Cstartup.S to correctly relocate shared data	laforge	2006-09-20	3	-3/+5
*	fix _edata_shared address definition	laforge	2006-09-20	2	-4/+2
*	- fix relocation of _data_shared segment	laforge	2006-09-20	3	-12/+40
*	- add linker scripts for SAM7S128	laforge	2006-09-20	3	-1/+113
*	Add DFU debugging capabilities (makes DFU compile if DEBUG=1)	laforge	2006-09-20	2	-0/+160
*	- add some more flash related definitions	laforge	2006-09-20	1	-8/+4
*	- implement some more missing DFU bits	laforge	2006-09-20	6	-35/+145
*	move flash code into dfu	laforge	2006-09-20	1	-0/+0
*	fix location of dfu_api	laforge	2006-09-20	1	-1/+1
*	fix typo (Henryk Ploetz)	laforge	2006-09-17	1	-1/+1
*	add flash size definitions for AT91SAM7S64/32, correct/complete those for S12...	laforge	2006-09-14	1	-8/+24
*	spi_transceive cannot work without a rx_buffer due to hardware restrictions (...	laforge	2006-09-14	1	-4/+2
*	add GPL disclaimer to all C files that I wrote	laforge	2006-09-13	37	-33/+949
*	Completely separate DFU from application program, we now have a real bootloader.	laforge	2006-09-13	13	-203/+1056
*	move to new directory	laforge	2006-09-12	22	-0/+0
*	move to new directory	laforge	2006-09-12	16	-0/+0
*	move to new directory	laforge	2006-09-12	113	-0/+0
*	- we now have two interfaces in the USB device	(no author)	2006-09-12	1	-2/+2
*	- add SSC READ and LOOP commands	(no author)	2006-09-12	1	-3/+14
*	add some more documentation / notes	(no author)	2006-09-12	4	-0/+267
*	usb performance benchmark	(no author)	2006-09-12	1	-0/+55
*	add some WDT skeleton code	(no author)	2006-09-12	1	-0/+23
*	some more debug related options (PLL lock status, button status, ssc start/st...	(no author)	2006-09-12	1	-8/+48
*	optimize for size, rather than performance	(no author)	2006-09-12	1	-1/+1
*	pio_irq USB access	(no author)	2006-09-12	3	-20/+67
*	- fix bootloader switch detection	(no author)	2006-09-12	5	-6/+34
*	further development of PICC ADC and SSC drivers	(no author)	2006-09-12	2	-28/+75
*	base address of SPI controller is 'const'	(no author)	2006-09-12	1	-1/+1
*	- don't configure PA15 as MISO, since poti's are write-only	(no author)	2006-09-10	1	-1/+1
*	enable clock of TC2 before configuring it	(no author)	2006-09-10	1	-0/+3
*	- Add notification in case PLL PIO status changes (serial + LED1)	(no author)	2006-09-10	1	-0/+16
*	Further PIO IRQ fixes	(no author)	2006-09-10	2	-10/+22
*	- Introduce new "BOARD=" make parameter to distinguish between PICC and PCD PIO	(no author)	2006-09-10	2	-9/+35
*	remove DFU specfic part that is replicated in dfu.c	(no author)	2006-09-10	1	-6/+0
*	make PWM 'main' build with current environment	(no author)	2006-09-10	1	-4/+13
*	add PWM and load modulation to main_openpicc	(no author)	2006-09-10	3	-15/+119
*	use SPI controllers internal timeout	(no author)	2006-09-10	2	-8/+21
*	move PWM code to OS	(no author)	2006-09-10	1	-0/+0
*	move PWM code to OS	(no author)	2006-09-10	1	-0/+0
*	add PLL inhibit support code for PICC	(no author)	2006-09-10	4	-31/+47