openpcd - Firmware for the OpenPCD, OpenPICC and SIMtrace hardware

	Commit message (Expand)	Author	Age	Files	Lines
...
*	pio_irq USB access	(no author)	2006-09-12	3	-20/+67
*	- fix bootloader switch detection	(no author)	2006-09-12	5	-6/+34
*	further development of PICC ADC and SSC drivers	(no author)	2006-09-12	2	-28/+75
*	base address of SPI controller is 'const'	(no author)	2006-09-12	1	-1/+1
*	- don't configure PA15 as MISO, since poti's are write-only	(no author)	2006-09-10	1	-1/+1
*	enable clock of TC2 before configuring it	(no author)	2006-09-10	1	-0/+3
*	- Add notification in case PLL PIO status changes (serial + LED1)	(no author)	2006-09-10	1	-0/+16
*	Further PIO IRQ fixes	(no author)	2006-09-10	2	-10/+22
*	- Introduce new "BOARD=" make parameter to distinguish between PICC and PCD PIO	(no author)	2006-09-10	2	-9/+35
*	remove DFU specfic part that is replicated in dfu.c	(no author)	2006-09-10	1	-6/+0
*	make PWM 'main' build with current environment	(no author)	2006-09-10	1	-4/+13
*	add PWM and load modulation to main_openpicc	(no author)	2006-09-10	3	-15/+119
*	use SPI controllers internal timeout	(no author)	2006-09-10	2	-8/+21
*	move PWM code to OS	(no author)	2006-09-10	1	-0/+0
*	move PWM code to OS	(no author)	2006-09-10	1	-0/+0
*	add PLL inhibit support code for PICC	(no author)	2006-09-10	4	-31/+47
*	add unfinished code to read ADC	(no author)	2006-09-10	1	-1/+15
*	add SPI Poti data sheet	(no author)	2006-09-10	1	-0/+0
*	allow user to control comparator poti via serial port	(no author)	2006-09-10	1	-4/+23
*	- add (currently unused) ability to put CPU in idle mode	(no author)	2006-09-10	2	-1/+13
*	Commit code to drive SPI Potentiometers	(no author)	2006-09-10	3	-1/+53
*	add PIO definitions for new PICC simulator hardware	(no author)	2006-09-10	1	-8/+47
*	add PIT support code	(no author)	2006-09-09	3	-1/+46
*	- tons of compile fixes for untested PICC code	(no author)	2006-09-09	8	-20/+142
*	- remove bogus comment	(no author)	2006-09-09	1	-5/+1
*	fix polarity of UDP_PUP	(no author)	2006-09-09	2	-6/+7
*	- we now definitely use PA22 for UDP_PUP, since SAM-BA wants to use PA16,	(no author)	2006-09-09	1	-2/+8
*	fix typo	(no author)	2006-09-09	1	-1/+1
*	remove old comment	(no author)	2006-09-09	1	-9/+0
*	- cleanup of comments in TC/SSC PCD/PICC spearation	(no author)	2006-09-09	4	-12/+84
*	remove old files	(no author)	2006-09-09	2	-61/+0
*	rename tc files	(no author)	2006-09-09	2	-0/+60
*	we now only have the tc_fdt part of the TC driver in the PICC section	(no author)	2006-09-09	2	-98/+8
*	TC_CDIV (carrier divisor) is part of both PICC and PCD, move it to 'os'	(no author)	2006-09-09	2	-0/+124
*	improve eeprom reading routine	(no author)	2006-09-09	1	-10/+18
*	rename ssc to picc_ssc	(no author)	2006-09-09	1	-0/+0
*	rename ssc to 'picc ssc' code	(no author)	2006-09-09	1	-0/+0
*	- cosmetic cleanup	(no author)	2006-09-09	16	-24/+26
*	- move rc632 specific debug commands from dbgu to main_dumbreader	(no author)	2006-09-09	2	-22/+32
*	update dfu_api to new address	(no author)	2006-09-09	1	-1/+1
*	add verbose PIO A mapping comment	(no author)	2006-09-09	1	-0/+50
*	- major reorganization, split source tree in	(no author)	2006-09-09	43	-196/+319
*	Add DFU support (unfinished, doesn't actually flash yet)	(no author)	2006-09-05	9	-142/+417
*	add ADC command class	(no author)	2006-09-04	1	-1/+5
*	add todo list for picc simulator	(no author)	2006-09-04	1	-0/+34
*	- remove bogus case '8'	(no author)	2006-08-25	1	-2/+0
*	commit missing header file	(no author)	2006-08-25	1	-0/+31
*	- add unfinished support for DFU (up to now state machine switching works, in...	(no author)	2006-08-25	6	-203/+854
*	- fix include path	(no author)	2006-08-25	1	-1/+3
*	- use exception vector handlers in RAM rather ROM (required for DFU to work)	(no author)	2006-08-25	3	-117/+138