summaryrefslogtreecommitdiff
path: root/firmware/src/dfu
Commit message (Collapse)AuthorAgeFilesLines
* DFU: add third 'alternate configuration' for RAM loadHarald Welte2011-07-301-3/+23
| | | | | This will allow us to load code directly into RAM without going through flash.
* sam7dfu: update copyright yearsHarald Welte2011-07-291-1/+1
|
* sam7dfu: make sure we can use USB reset to get from DFU -> APPHarald Welte2011-07-291-2/+14
| | | | | | | When we went through a Download -> Manifest cycle, we can switch back to dfuIDLE. However, we need to memorize that manifest had already happened and thus should treat a host-initiated bus reset as trigger to switch back into application mode.
* dfu: fix EP0 IN trasnfers that are even multiple of 8Harald Welte2011-07-071-4/+14
| | | | | | We have to send a ZLP at the end of such transfers, otherwise the host will time out at the end of the transfer. This resulted in multi-second delays for recognizing the SIMtrace hardware by the USB host.
* allow GETSTATE and GETSTATUS requests in MANIFEST state (compatibility with ↵laforge2008-02-171-3/+19
| | | | | | dfu-util) git-svn-id: https://svn.openpcd.org:2342/trunk@413 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* Add watchdog reset to dfuhenryk2007-11-071-1/+8
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@314 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* deleted unsused filesmeri2007-04-102-75/+0
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@299 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* removed ugly CR/LFmeri2007-04-101-25/+25
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@296 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* moved flash code to seperate filemeri2007-04-101-2/+2
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@294 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - add new DAC driver (instead of poti) for PICClaforge2006-12-181-0/+6
| | | | | | | | | | | | | | - DFU: put all DEBUG_ defines in "#ifdef DEBUG" enclosure - alter GPIO defines for new OpenPICC v0.4 prototype - add new AT91F_DBGU_Fini() function - take care of new inverted USB pullip in OpenPICC v0.4 prototype - fix typo in 'opicc_reg_write' macro - add some more PICC related SSC code NOTE: this firmware is the first version that will _NOT_ run on a OpenPICC v0.3 anymore! (All changes by Henryk Ploetz) git-svn-id: https://svn.openpcd.org:2342/trunk@283 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - add svn:ignore property to make 'svn st' output more realisticlaforge2006-10-152-0/+39
| | | | | | | | | | | | | | | | | | | | | - remove old copy+paste+edit port of parts of librfid - add ability to directly link librfid.a from mainline librfid - make usb string descriptors optional again (config.h) - fix TC_CDIV to reset correctly on swtrig (For OpenPICC) - temporarily re-implement ep0_send_data() in pcd_enumerate.c - make UDP_PUPv4 switching conditional to PCD - introduce DEBUG_UNBUFFERED define in dbgu.c - fix some signed/unsigned/typecast related compiler warnings - remove dead code from src/os/led.c - implement a 'mdelay' and 'usleep' stub function (FIXME!) - rename rc632_... functions into opcd_rc632_... to avoid confusion - introduce new 'main_librfid' TARGET - make main_{reqa,analog} work with librfid rather than old code - introduce mroe debugging options for FIQ handler code in Cstartup_app - lots of PICC work that doesn't need comments now git-svn-id: https://svn.openpcd.org:2342/trunk@266 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* v0.4 of the readers uses a different pin for the USB pulluplaforge2006-10-041-0/+2
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@261 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* acknowledge SET_INTERFACE requestlaforge2006-09-301-1/+3
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@238 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - fix minor issues with USB string supportlaforge2006-09-251-1/+1
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@228 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - Include tool for Converting ASCII to UTF-16LE in C-Headerlaforge2006-09-252-19/+44
| | | | | | | | - Build UTF-16LE USB String descriptors from ASCII File - Introduce USB String Descriptor to DFU and runtime firmware git-svn-id: https://svn.openpcd.org:2342/trunk@227 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - Implement runtime DFU switching and reset-after-update. This meanslaforge2006-09-231-17/+17
| | | | | | | we can now reflash without any buttons or replugging of the device git-svn-id: https://svn.openpcd.org:2342/trunk@222 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* add reset key '9' to dfu dbgu codelaforge2006-09-231-0/+5
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@221 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* make sure DFU loader always prints some informational / copyright message ↵laforge2006-09-223-26/+28
| | | | | | upon startup git-svn-id: https://svn.openpcd.org:2342/trunk@220 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - we increase the DFU size from 4k to 16k size. This is mainly due to thelaforge2006-09-224-23/+59
| | | | | | | | | | | | | | | | | | | SAM7S128 and SAM7S256 being restricted to 16k lock region size. If we want to lock the bootloader, it has to be 16k aligned. This wastes a lot of memory, since a non-debug DFU implementation fits currently into less than 4k. But anyway, we have lots of flexibility for the future given that amount of space. - The DFU size change introduces also a change in dfu_api location to 0x103fd0 - Allow GETSTATE and GETSTATUS from runtime mode (optional in DFU spec) - Make dfu_status a .data.shared variable, since it is used from GETSTATUS which we already support in runtime mode - do some led switching while flashing via DFU - disable all non-usb/dbgu interrupts when switching to DFU mode - fix interrupt-storm problem when dbgu is used in DFU loader - add missing linker script for SAM7S128 git-svn-id: https://svn.openpcd.org:2342/trunk@218 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* DFU works (fix various bugs such as forgetting to shift the page number, ↵laforge2006-09-214-87/+159
| | | | | | checking for invalid page numbers, off-by-one error in flash page calculation, etc.) git-svn-id: https://svn.openpcd.org:2342/trunk@215 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* use POSITIVE_EDGE as a workaround to the irq storm if HIGH_LEVEL is used. ↵laforge2006-09-211-1/+5
| | | | | | This basically disables any input from the dbgu serial port, but we don't need it in DFU anyway. git-svn-id: https://svn.openpcd.org:2342/trunk@213 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* add some debugging output to flash_page()laforge2006-09-211-1/+6
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@212 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* add dfu flash header filelaforge2006-09-201-0/+4
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@211 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - add support for flashing to DFUlaforge2006-09-203-53/+57
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@210 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - Add OpenPICC register definition (and USB command handling)laforge2006-09-201-10/+28
| | | | | | | | | | | | | | | | | | | - Add automatic generation of include/compile.h with svn revision and compiletime - Add openpcd_compile_version structure to obtain version via USB - Move LED commands into new CMD_CLS_GENERIC family - Update TODO - Add support for large (2048 byte) request contexts in addition to 64byte - Shrink req_ctx size by collapsing rx and tx buffer into one - move definition of DFU_API_LOCATION to header file - Implement large req_ctx aware USB transmit / refill routines - Implement TX refilling for IRQ Endpoint - Print version information at startup time - move some generic req_ctx processing into usb_handler.c - Some further work on DFU (still not finished) - Only use '-Os' for DFU, use '-O2' for application code git-svn-id: https://svn.openpcd.org:2342/trunk@208 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* Add DFU debugging capabilities (makes DFU compile if DEBUG=1)laforge2006-09-202-0/+160
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@203 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - implement some more missing DFU bitslaforge2006-09-203-34/+109
| | | | | | | | - add debugging support to DFU - introduce a auto-generated compile.h to add reviison number/... to firmware git-svn-id: https://svn.openpcd.org:2342/trunk@201 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* move flash code into dfulaforge2006-09-201-0/+45
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@200 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* add GPL disclaimer to all C files that I wrotelaforge2006-09-132-0/+28
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@195 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* Completely separate DFU from application program, we now have a real bootloader.laforge2006-09-132-0/+758
DFU occupies 0x00100000 - 0x00100fff in flash, application starts at 0x00101000. DFU also occupies the first couple of bytes in SRAM, application starts at 0x00200024. In order to produce a samba-flashable image, first build dfu.bin by typing 'make -f Makefule.dfu', succeeded by 'make TARGET=... DEBUG=... BOARD=...' and then concatenating the two files together, e.g. cat dfu.bin main_reqa.bin > flash.bin. Actual flashing via DFU is still not operational, but will be implemented next git-svn-id: https://svn.openpcd.org:2342/trunk@194 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
personal git repositories of Harald Welte. Your mileage may vary