openpcd - Firmware for the OpenPCD, OpenPICC and SIMtrace hardware

	Commit message (Collapse)	Author	Age	Files	Lines
*	simtrace: Add heartbeat message to debug console	Min Xu	2014-11-11	1	-0/+10
\|
*	iso7816_uart: Make sure ATR is separated from normal APDU in all cases	Harald Welte	2012-05-18	1	-7/+12
\| \| \| \| \|	Prior to this patch, the ATR was not send in a separate USB message for cards that are T=0 only.
*	7816_uart: add comment about f/d calculation	Harald Welte	2012-05-18	1	-0/+2
\|
*	simtrace: introduce statisticsv0.5	Harald Welte	2012-03-23	1	-1/+32
\| \| \| \| \| \|	the statistics count various events like overruns, parity errors, missing rctx and can dump those stats via USB as well as on the serial console.
*	simtrace: Inform host of Fi/Di values (and flag change due to PPS)	Harald Welte	2012-02-12	1	-0/+5
\|
*	simtrace: 7816 UART: Add missing entry in Di table	Sylvain Munaut	2012-01-26	1	-1/+1
\| \| \| \| \| \|	Add missing entry in Fi_table. It's apparently used as '64' in some reader and 'unsupported' in some other. For simtrace I guess we should consider it 64.
*	Fix fi/di calculation for certain mobiles like GT-S770 or HTC Raphael	Bjoern Kerler	2011-10-21	1	-3/+3
\| \| \| \| \|	There were some mistakes while copying the tables from ISO 7816-3, and also a quite old version of 7816-3 was used.
*	SIMTRACE: ISO7816: Deal with ATR that don't have historical bytesv0.2	Harald Welte	2011-08-16	1	-11/+21
\| \| \| \| \|	In case there are no historical bytes, we immediately transition from the last TD byte into the WAIT_TCK or WAIT_APDU state.
*	ISO7816: Properly handle T=0 only cards without TCK in ATR	Harald Welte	2011-08-16	1	-1/+13
\|
*	SIMTRACE UART: Reset error status on error related IRQ	Harald Welte	2011-08-15	1	-0/+9
\| \| \| \| \|	This prevents an IRQ-flood after a parity or overrun error, which in turn would cause a watchdog reset.
*	simtrace UART: set INACK flag to make sure we ignore any parity error	Harald Welte	2011-08-15	1	-3/+3
\| \| \| \| \| \| \|	As a SIM card tracer, we want to remain completely passive and thus not signal back parity errors with the ISO 7816 NACK. The UART INACK flag does exactly that...
*	simtrace: Make sure ATR is sent in its own RCTX and we re-allocate in time	Harald Welte	2010-11-21	1	-1/+11
\|
*	simtrace: Introduce code for proper handling of PTS / PPS	Harald Welte	2010-11-18	1	-12/+148
\|
*	simtrace: add TC based waiting time counter, signal ATR / expiry via USB	Harald Welte	2010-11-18	1	-75/+151
\|
*	simtrace: introduce RST pin handling	Harald Welte	2010-11-14	1	-12/+32
\|
*	Initial version of a SAM7 USART based ISO7816-3 T=0 sniffer	Harald Welte	2010-11-14	1	-0/+399