openpcd - Firmware for the OpenPCD, OpenPICC and SIMtrace hardware

	Commit message (Collapse)	Author	Age	Files	Lines
*	simtrace: introduce statisticsv0.5	Harald Welte	2012-03-23	3	-2/+58
\| \| \| \| \| \|	the statistics count various events like overruns, parity errors, missing rctx and can dump those stats via USB as well as on the serial console.
*	simtrace: implement SIM power switching API	Harald Welte	2012-03-22	1	-16/+46
\| \| \| \| \| \| \| \| \|	there is now a high-level command by which we can swithc the VCC supply of the SIM cards. For some reason, the _PASS variant (passing through the voltage from the phone) doesn't seem to work reliably. It might be that we are draining reverse current throught the LDO once we supply SIM power that way.
*	make VCC / card detect more reliable	Harald Welte	2012-03-22	1	-2/+2
\|
*	simtrace: Inform host of Fi/Di values (and flag change due to PPS)	Harald Welte	2012-02-12	1	-0/+5
\|
*	simtrace: 7816 UART: Add missing entry in Di table	Sylvain Munaut	2012-01-26	1	-1/+1
\| \| \| \| \| \|	Add missing entry in Fi_table. It's apparently used as '64' in some reader and 'unsupported' in some other. For simtrace I guess we should consider it 64.
*	Make sure we don't forward power _and_ supply SIM power at the same time	Kevin Redon	2011-12-18	1	-0/+10
\| \| \| \| \| \| \| \|	The FPF2005 has no reverse voltage blocker, this is why the 3.3V from the LDO flows back into VCC_PHONE. It even damages the chip (so says the datasheet) I corrected the double power source problem by disabling the LDO (see patch), but still 1.8V does not work and 3.0-3.3V is used. I have to look for other reasons.
*	Fix fi/di calculation for certain mobiles like GT-S770 or HTC Raphael	Bjoern Kerler	2011-10-21	1	-3/+3
\| \| \| \| \|	There were some mistakes while copying the tables from ISO 7816-3, and also a quite old version of 7816-3 was used.
*	SIMTRACE: ISO7816: Deal with ATR that don't have historical bytesv0.2	Harald Welte	2011-08-16	1	-11/+21
\| \| \| \| \|	In case there are no historical bytes, we immediately transition from the last TD byte into the WAIT_TCK or WAIT_APDU state.
*	ISO7816: Properly handle T=0 only cards without TCK in ATR	Harald Welte	2011-08-16	1	-1/+13
\|
*	SIMTRACE UART: Reset error status on error related IRQ	Harald Welte	2011-08-15	1	-0/+9
\| \| \| \| \|	This prevents an IRQ-flood after a parity or overrun error, which in turn would cause a watchdog reset.
*	simtrace UART: set INACK flag to make sure we ignore any parity error	Harald Welte	2011-08-15	1	-3/+3
\| \| \| \| \| \| \|	As a SIM card tracer, we want to remain completely passive and thus not signal back parity errors with the ISO 7816 NACK. The UART INACK flag does exactly that...
*	DFU: add third 'alternate configuration' for RAM load	Harald Welte	2011-07-30	2	-0/+2
\| \| \| \| \|	This will allow us to load code directly into RAM without going through flash.
*	simtrace: add some early spi flash utility routines	Harald Welte	2011-07-30	2	-0/+224
\| \| \| \|	This also adds a new 'main_factory' target for simtrace
*	simtrace: initialize sniffer mode right after start-up	Harald Welte	2011-06-30	1	-18/+22
\|
*	simtrace: switch VCC_SIM into output mode, as we use it to supply Vcc	Harald Welte	2011-06-21	1	-2/+8
\| \| \| \| \| \|	This is just a temp rework in the 1st generation prototype, as the bus switch has too high resistance for passing throuhg Vcc from the phone to the SIM.
*	simtrace: add VCC_PHINE IRQ detection	Harald Welte	2011-06-21	1	-0/+19
\|
*	simtrace: introduce mode sniffer / mitm switching	Harald Welte	2011-06-17	2	-6/+50
\|
*	simtrace: add support for the analog bus switch	Harald Welte	2011-06-16	3	-1/+93
\|
*	update USB strings (company name and some copy+paste mistakes)	Harald Welte	2011-06-15	2	-3/+3
\|
*	typo: Fix typo, transform reqyests to requests.	Holger Hans Peter Freyther	2011-01-31	1	-1/+1
\|
*	add missing usb_strings_dfu.txt file to simtrace directory	Harald Welte	2010-12-09	1	-0/+5
\|
*	simtrace: Make sure ATR is sent in its own RCTX and we re-allocate in time	Harald Welte	2010-11-21	1	-1/+11
\|
*	simtrace: fix problems causing bogus waiting time expirations	Harald Welte	2010-11-18	1	-1/+5
\|
*	simtrace: Introduce code for proper handling of PTS / PPS	Harald Welte	2010-11-18	1	-12/+148
\|
*	simtrace: add TC based waiting time counter, signal ATR / expiry via USB	Harald Welte	2010-11-18	5	-78/+292
\|
*	simtrace: introduce RST pin handling	Harald Welte	2010-11-14	1	-12/+32
\|
*	Initial version of a SAM7 USART based ISO7816-3 T=0 sniffer	Harald Welte	2010-11-14	3	-0/+503