summaryrefslogtreecommitdiff
path: root/firmware/src
Commit message (Collapse)AuthorAgeFilesLines
...
* - we have to respond with a STALL to SET_CONFIGURATIONlaforge2006-10-031-31/+33
| | | | | | | | | - add a comment about this strange fact - some code cleanup - add missing 'break' after end of GET_DESCRIPTOR USB_DT_DEVICE git-svn-id: https://svn.openpcd.org:2342/trunk@253 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - add proper system interrupt (shared) demultiplexing codelaforge2006-10-017-16/+200
| | | | | | | - port debug unit, watchdog timer, periodic interval timer to system_irq.c git-svn-id: https://svn.openpcd.org:2342/trunk@252 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* synchronize bit clock based on software trigger (needed for cdiv_sync)laforge2006-10-011-1/+2
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@251 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - add command to read rc632 serial number via USBlaforge2006-10-011-0/+11
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@250 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* add support for cdiv (sample clock) bit clock synchronizationlaforge2006-10-012-0/+108
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@248 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* re-define REQ_CTX_STATE_FREE != 0 to detect bugslaforge2006-10-011-1/+1
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@247 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* initialize req_ctx state as free.laforge2006-10-011-0/+1
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@246 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* clean up dbgu startup printout laforge2006-10-011-8/+8
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@245 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* split irq handler in two parts to make it callable from FIQlaforge2006-10-011-2/+10
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@244 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - finish implementation of timers based on PITlaforge2006-10-014-1/+217
| | | | | | | - add [untested] code for timer-based LED blink codes git-svn-id: https://svn.openpcd.org:2342/trunk@242 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - add (currently inactive) code for the watch dog timerlaforge2006-09-303-5/+23
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@240 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - introduce FIQ stack of 1k (way too large, but we might have debug...)laforge2006-09-302-31/+148
| | | | | | | - move FIQ processing out of DFU Flash and into application/RAM git-svn-id: https://svn.openpcd.org:2342/trunk@239 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* acknowledge SET_INTERFACE requestlaforge2006-09-301-1/+3
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@238 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - Add revision to USB descriptorlaforge2006-09-301-1/+1
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@237 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* add stub for later implementation of suspend/resumelaforge2006-09-301-2/+11
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@236 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - more accurate (and USB compliant) state transitionslaforge2006-09-302-45/+161
| | | | | | | - make gcc spit a bit less warnings git-svn-id: https://svn.openpcd.org:2342/trunk@235 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - free all pending contexts when endpoint is being resetlaforge2006-09-301-5/+7
| | | | | | | - speed up usb processing by putting respective sections in RAM git-svn-id: https://svn.openpcd.org:2342/trunk@234 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - add dbgu key '9' for software resetlaforge2006-09-271-4/+8
| | | | | | | - fix dbgu welcome message git-svn-id: https://svn.openpcd.org:2342/trunk@233 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - increase number of large (2k) contextx to 8laforge2006-09-272-4/+5
| | | | | | | | | - move req_ctx_find_get into ram, since this is frequently used within interrupt handlers and thus ought to be as fast as possible - correctly initialize req_ctx size (bugfix!) git-svn-id: https://svn.openpcd.org:2342/trunk@232 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - fix minor issues with USB string supportlaforge2006-09-253-3/+3
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@228 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - Include tool for Converting ASCII to UTF-16LE in C-Headerlaforge2006-09-257-49/+96
| | | | | | | | - Build UTF-16LE USB String descriptors from ASCII File - Introduce USB String Descriptor to DFU and runtime firmware git-svn-id: https://svn.openpcd.org:2342/trunk@227 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* use officially assigned usb vendor and product id'slaforge2006-09-252-5/+7
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@225 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* disalbe rc632 register level debugging by defaultlaforge2006-09-231-1/+1
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@224 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - fix return value in case of unknown commandlaforge2006-09-231-1/+1
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@223 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - Implement runtime DFU switching and reset-after-update. This meanslaforge2006-09-232-17/+41
| | | | | | | we can now reflash without any buttons or replugging of the device git-svn-id: https://svn.openpcd.org:2342/trunk@222 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* add reset key '9' to dfu dbgu codelaforge2006-09-231-0/+5
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@221 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* make sure DFU loader always prints some informational / copyright message ↵laforge2006-09-223-26/+28
| | | | | | upon startup git-svn-id: https://svn.openpcd.org:2342/trunk@220 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - move large rctx definitions to req_ctx.hlaforge2006-09-2210-120/+222
| | | | | | | | | | | | | | | | - add more fine-grained debugging macros in pcd_enumarate.c - resolve race conditions between main-loop ep_refill and irq-triggered ep_refill by adding one irq-[b]locking variant - consolidate endpoint reset code into reset_ep() - add code to handle correct transmission and reception of usb transfers larger than endpoint size - use new jump address (0x104000) in DFU Cstartup.S - move main_usb to pcd subdirectory - fix include/compile.h make dependencies - make usb benchmark code use new large req_ctx git-svn-id: https://svn.openpcd.org:2342/trunk@219 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - we increase the DFU size from 4k to 16k size. This is mainly due to thelaforge2006-09-224-23/+59
| | | | | | | | | | | | | | | | | | | SAM7S128 and SAM7S256 being restricted to 16k lock region size. If we want to lock the bootloader, it has to be 16k aligned. This wastes a lot of memory, since a non-debug DFU implementation fits currently into less than 4k. But anyway, we have lots of flexibility for the future given that amount of space. - The DFU size change introduces also a change in dfu_api location to 0x103fd0 - Allow GETSTATE and GETSTATUS from runtime mode (optional in DFU spec) - Make dfu_status a .data.shared variable, since it is used from GETSTATUS which we already support in runtime mode - do some led switching while flashing via DFU - disable all non-usb/dbgu interrupts when switching to DFU mode - fix interrupt-storm problem when dbgu is used in DFU loader - add missing linker script for SAM7S128 git-svn-id: https://svn.openpcd.org:2342/trunk@218 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* fix completely broken logic of processing pending outbound packets. We now dolaforge2006-09-221-17/+5
| | | | | | | | | | | | | | | | | | all the req_ctx state changes from within pcd_handler.c and only expose the refill_ep() functions. It's questionable whether we need to keep calling those functions all the time either. Once kicked off, the tx completion interrupts of the UDC will refill the pipe as long as there is data available. So realistically speaking, we'd only need to trigger tx once (and keep triggering until no EBUSY or other error is signalled anymore). Some form of state machine would be fine for doing this, one that registers a timer with the core OS timer (once we have something equivalent to 'struct timer_list'. git-svn-id: https://svn.openpcd.org:2342/trunk@217 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* fix a wrong memset length (we want length of atqa, not length of the pointer ↵laforge2006-09-221-1/+1
| | | | | | to it). git-svn-id: https://svn.openpcd.org:2342/trunk@216 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* DFU works (fix various bugs such as forgetting to shift the page number, ↵laforge2006-09-215-88/+167
| | | | | | checking for invalid page numbers, off-by-one error in flash page calculation, etc.) git-svn-id: https://svn.openpcd.org:2342/trunk@215 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* some code cleanuplaforge2006-09-211-7/+15
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@214 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* use POSITIVE_EDGE as a workaround to the irq storm if HIGH_LEVEL is used. ↵laforge2006-09-211-1/+5
| | | | | | This basically disables any input from the dbgu serial port, but we don't need it in DFU anyway. git-svn-id: https://svn.openpcd.org:2342/trunk@213 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* add some debugging output to flash_page()laforge2006-09-211-1/+6
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@212 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* add dfu flash header filelaforge2006-09-201-0/+4
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@211 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - add support for flashing to DFUlaforge2006-09-203-53/+57
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@210 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* re-set SAK during every chaining iteration (Henryk Ploetz)laforge2006-09-201-0/+1
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@209 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - Add OpenPICC register definition (and USB command handling)laforge2006-09-2024-172/+415
| | | | | | | | | | | | | | | | | | | - Add automatic generation of include/compile.h with svn revision and compiletime - Add openpcd_compile_version structure to obtain version via USB - Move LED commands into new CMD_CLS_GENERIC family - Update TODO - Add support for large (2048 byte) request contexts in addition to 64byte - Shrink req_ctx size by collapsing rx and tx buffer into one - move definition of DFU_API_LOCATION to header file - Implement large req_ctx aware USB transmit / refill routines - Implement TX refilling for IRQ Endpoint - Print version information at startup time - move some generic req_ctx processing into usb_handler.c - Some further work on DFU (still not finished) - Only use '-Os' for DFU, use '-O2' for application code git-svn-id: https://svn.openpcd.org:2342/trunk@208 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - fix linker scripts and Cstartup.S to correctly relocate shared datalaforge2006-09-201-1/+1
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@207 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - fix relocation of _data_shared segmentlaforge2006-09-201-7/+26
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@205 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* Add DFU debugging capabilities (makes DFU compile if DEBUG=1)laforge2006-09-202-0/+160
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@203 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* - implement some more missing DFU bitslaforge2006-09-203-34/+109
| | | | | | | | - add debugging support to DFU - introduce a auto-generated compile.h to add reviison number/... to firmware git-svn-id: https://svn.openpcd.org:2342/trunk@201 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* move flash code into dfulaforge2006-09-201-0/+0
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@200 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* fix location of dfu_apilaforge2006-09-201-1/+1
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@199 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* fix typo (Henryk Ploetz)laforge2006-09-171-1/+1
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@198 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* spi_transceive cannot work without a rx_buffer due to hardware restrictions ↵laforge2006-09-141-4/+2
| | | | | | (Bug report by Henryk Ploetz) git-svn-id: https://svn.openpcd.org:2342/trunk@196 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* add GPL disclaimer to all C files that I wrotelaforge2006-09-1336-33/+610
| | | | git-svn-id: https://svn.openpcd.org:2342/trunk@195 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* Completely separate DFU from application program, we now have a real bootloader.laforge2006-09-137-193/+268
| | | | | | | | | | | | | | DFU occupies 0x00100000 - 0x00100fff in flash, application starts at 0x00101000. DFU also occupies the first couple of bytes in SRAM, application starts at 0x00200024. In order to produce a samba-flashable image, first build dfu.bin by typing 'make -f Makefule.dfu', succeeded by 'make TARGET=... DEBUG=... BOARD=...' and then concatenating the two files together, e.g. cat dfu.bin main_reqa.bin > flash.bin. Actual flashing via DFU is still not operational, but will be implemented next git-svn-id: https://svn.openpcd.org:2342/trunk@194 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
* move to new directorylaforge2006-09-1262-0/+8294
git-svn-id: https://svn.openpcd.org:2342/trunk@191 6dc7ffe9-61d6-0310-9af1-9938baff3ed1
personal git repositories of Harald Welte. Your mileage may vary