summaryrefslogtreecommitdiff
path: root/firmware
Commit message (Expand)AuthorAgeFilesLines
* DBGU: Print Reset controller Status Register on bootHarald Welte2011-08-151-0/+4
* USB: Add support for the 3rd DFU interface (RAM)Harald Welte2011-08-151-0/+6
* add simtrace README fileHarald Welte2011-07-301-0/+9
* update mkcompile_h to work with git repositoryHarald Welte2011-07-302-4/+155
* DFU: Fix execution of software that was loaded to RAM via DFUv0.1Harald Welte2011-07-301-8/+17
* DFU: Support re-flashing of DFU via DFUHarald Welte2011-07-302-18/+134
* DFU: add third 'alternate configuration' for RAM loadHarald Welte2011-07-308-10/+36
* simtrace: add some early spi flash utility routinesHarald Welte2011-07-303-1/+225
* Makefile: SIMtrace uses SAM7S128, not 256Harald Welte2011-07-302-2/+2
* add new RUN_FROM_RAM run-mode for direct DFU-to-RAM supportHarald Welte2011-07-304-3/+99
* use gcc/ld flags -ffunction-sections and --gc-sectionsHarald Welte2011-07-304-17/+17
* sam7dfu: update copyright yearsHarald Welte2011-07-291-1/+1
* sam7dfu: make sure we can use USB reset to get from DFU -> APPHarald Welte2011-07-291-2/+14
* USB driver: use the DFU-provided function to send EP0 dataHarald Welte2011-07-071-48/+1
* dfu: fix EP0 IN trasnfers that are even multiple of 8Harald Welte2011-07-071-4/+14
* simtrace: initialize sniffer mode right after start-upHarald Welte2011-06-301-18/+22
* simtrace: switch VCC_SIM into output mode, as we use it to supply VccHarald Welte2011-06-211-2/+8
* simtrace: add VCC_PHINE IRQ detectionHarald Welte2011-06-211-0/+19
* simtrace: use better names for GPIO linesHarald Welte2011-06-211-4/+5
* simtrace: introduce mode sniffer / mitm switchingHarald Welte2011-06-174-8/+74
* simtrace: add support for the analog bus switchHarald Welte2011-06-165-3/+96
* simtrace: add more definitions regarding real hw prototypeHarald Welte2011-06-164-1/+32
* update USB strings (company name and some copy+paste mistakes)Harald Welte2011-06-152-3/+3
* typo: Fix typo, transform reqyests to requests.Holger Hans Peter Freyther2011-01-317-7/+7
* vsprintf.c: Fix compilation by including limits.hHolger Hans Peter Freyther2011-01-311-0/+1
* add missing usb_strings_dfu.txt file to simtrace directoryHarald Welte2010-12-091-0/+5
* AT91SAM7.h: Fix computation of AT91C_IFLASH_LOCK_REGION_SIZEHarald Welte2010-11-211-1/+1
* simtrace: Make sure ATR is sent in its own RCTX and we re-allocate in timeHarald Welte2010-11-211-1/+11
* simtrace: Commit Makefile changes to support build of simtrace WARNINGHarald Welte2010-11-182-6/+18
* req_ctx: Increase size of small req_ctx to 128 and have 16 instead of 8Harald Welte2010-11-182-3/+3
* simtrace: fix problems causing bogus waiting time expirationsHarald Welte2010-11-181-1/+5
* simtrace: Introduce code for proper handling of PTS / PPSHarald Welte2010-11-181-12/+148
* simtrace: add TC based waiting time counter, signal ATR / expiry via USBHarald Welte2010-11-187-80/+316
* simtrace: introduce RST pin handlingHarald Welte2010-11-141-12/+32
* Initial version of a SAM7 USART based ISO7816-3 T=0 snifferHarald Welte2010-11-146-2/+529
* enable USB string descriptorsHarald Welte2010-11-141-1/+1
* disable USB EP0 debuggingHarald Welte2010-11-141-1/+1
* Use smaller number of request contexts on a SAM64Harald Welte2010-11-131-0/+5
* On the Olimex board, the buttons are low-activeHarald Welte2010-11-131-1/+7
* AT91SAM7S: Fix linker script (stack) for 64kByte flash versionHarald Welte2010-11-131-1/+1
* mark _ctype as const to be able to put it in flashHarald Welte2010-11-132-2/+2
* add linker scripts for AT91SAM7S64 (64kByte flash / 16kByte RAM) variantHarald Welte2010-11-122-0/+210
* fix STAT_ERR/STAT_IRQ bit definition error in RC632 STATUS register definitionlaforge2008-05-241-2/+2
* * move usb descriptors into separate file (src/os/usb_descriptors_openpcd.h)laforge2008-02-237-98/+556
* allow GETSTATE and GETSTATUS requests in MANIFEST state (compatibility with d...laforge2008-02-171-3/+19
* fix USB strings: OpenPCD is a RFID Reader, not a simulatorlaforge2008-02-172-2/+2
* add rc632 eeprom write functionlaforge2008-02-081-0/+51
* add more rc632 register definitions (from librfid)laforge2008-02-081-4/+38
* update README with correct compile instrucitons, refer to wikilaforge2008-02-081-1/+6
* make sure librfid is used when compiling main_mifarelaforge2008-01-221-0/+4
personal git repositories of Harald Welte. Your mileage may vary