summaryrefslogtreecommitdiff
path: root/openpicc/application
Commit message (Expand)AuthorAgeFilesLines
* Sanitize and clarify the len handling in rx buffers.henryk2007-12-145-28/+44
* Add complicated mechanism that should have brought clock cycle accurate measu...henryk2007-12-121-0/+1
* Add new miller decoder (not working yet)henryk2007-12-127-34/+156
* Some more delayhenryk2007-12-111-3/+5
* Several modifications to enable spinning until the correct phase is reached i...henryk2007-12-115-18/+53
* Clean up SSC performance metric reportinghenryk2007-12-094-21/+47
* Prevent late frames by spinning in SSC CP0 IRQ till end of short frame receptionhenryk2007-12-094-8/+34
* Make it possible to send long frames for debugginghenryk2007-12-094-36/+82
* Change parity storage in frame structhenryk2007-12-092-3/+4
* Count and print late frameshenryk2007-12-094-3/+57
* inlined miller bit decode functionmeri2007-12-061-1/+1
* Fix stupid buffer leakage code in standard modehenryk2007-12-062-3/+5
* Obsolete commenthenryk2007-12-051-2/+0
* Add a kludge to make repetitive sends working. For some obscure reason the fi...henryk2007-12-052-0/+6
* Revamp SSC buffer handling, should severely reduce buffer leakagehenryk2007-12-055-154/+175
* remove old debugging #ifdef'shenryk2007-12-053-26/+10
* Change tc_cdiv_set_divider. The new code seems to work nearly perfect (jitter...henryk2007-12-041-2/+5
* ATQA needs to be transmitted with parityhenryk2007-12-031-1/+1
* * Reduce leaking of TX buffershenryk2007-12-033-3/+19
* Fix copy and paste error in prefill_bufferhenryk2007-12-031-1/+8
* Fix power-on logic for the case that the card is already in the fieldhenryk2007-11-301-26/+25
* Fix SSC TX registers (especially the clock source selection), peripheral conf...henryk2007-11-292-7/+40
* Move to prefilling the transmit buffer for faster ATQA responsehenryk2007-11-292-33/+53
* Switch to hardcoded fiq handler implementation directly in the vector table (...henryk2007-11-291-26/+5
* Forgotten filehenryk2007-11-271-0/+5
* Print relevant SSC registershenryk2007-11-273-2/+18
* Restructure irq handling for setting tc_fdt (works now) and to get most iso s...henryk2007-11-264-72/+140
* Remove unusedhenryk2007-11-261-67/+0
* Prepare transmission codehenryk2007-11-268-111/+264
* Add load modulation and encoding/decoding code from haraldhenryk2007-11-249-3/+558
* hex and dec ...henryk2007-11-231-1/+1
* Add scale values to the field meterhenryk2007-11-231-2/+5
* Add a work around to have each pio data change fiq followed by a regular IRQ ...henryk2007-11-233-8/+54
* Commit status quo (pending cleanup of the debug and experimental code that I ...henryk2007-11-237-16/+61
* Remove obsolete codehenryk2007-11-221-28/+6
* Refactor frame print code out and use in iso14443_layer3ahenryk2007-11-222-28/+39
* Add task and command to print a continouos field meterhenryk2007-11-221-1/+54
* Commit status quo: Start adding iso 14443 layer 3a codehenryk2007-11-218-22/+180
* Checking in status quo: Can currently receive and print frames in ssc continu...henryk2007-11-219-147/+321
* Fight synchronization problemshenryk2007-11-201-3/+31
* Move some definitions to header filehenryk2007-11-192-9/+11
* Add ssc rx start and reboot commandshenryk2007-11-191-1/+23
* Add (ring-)buffered print functions to enable debug output from IRQ handlers ...henryk2007-11-185-8/+129
* Make vLedBlink* more recognizeable on oscilloscopehenryk2007-11-181-2/+2
* Add blink functions (debugging help with oscilloscope)henryk2007-11-162-1/+23
* Rewrite irq handlers according to the new information in http://www.freertos....henryk2007-11-143-9/+23
* Slight progress, still: enabling tc_fdt crashes the processor after some bitshenryk2007-11-135-4/+19
* Get tc_cdiv working (presumably, need to check on the oscilloscope)henryk2007-11-136-13/+74
* Add PIO IRQ counter (and print it in 'c' command)henryk2007-11-136-40/+66
* Add code modules for tc_fdt, tc_cdiv_sync, tc_cdiv, ssc_picchenryk2007-11-1111-1/+999
personal git repositories of Harald Welte. Your mileage may vary