summaryrefslogtreecommitdiff
path: root/openpicc
Commit message (Expand)AuthorAgeFilesLines
...
* Prevent late frames by spinning in SSC CP0 IRQ till end of short frame receptionhenryk2007-12-095-9/+43
* Make it possible to send long frames for debugginghenryk2007-12-094-36/+82
* Change parity storage in frame structhenryk2007-12-092-3/+4
* Count and print late frameshenryk2007-12-094-3/+57
* inlined miller bit decode functionmeri2007-12-061-1/+1
* Fix stupid buffer leakage code in standard modehenryk2007-12-062-3/+5
* Obsolete commenthenryk2007-12-051-2/+0
* Add a kludge to make repetitive sends working. For some obscure reason the fi...henryk2007-12-052-0/+6
* Revamp SSC buffer handling, should severely reduce buffer leakagehenryk2007-12-055-154/+175
* remove old debugging #ifdef'shenryk2007-12-054-26/+10
* Change tc_cdiv_set_divider. The new code seems to work nearly perfect (jitter...henryk2007-12-041-2/+5
* Add (#ifdef'ed out) code to measure critical section timing with an LEDhenryk2007-12-042-1/+9
* Graphical explanation of what should/could happen when TC0 RC is re-set to a ...henryk2007-12-032-0/+0
* Disbale tracing again. Maybe that's giving less delay?henryk2007-12-031-1/+1
* ATQA needs to be transmitted with parityhenryk2007-12-031-1/+1
* * Reduce leaking of TX buffershenryk2007-12-033-3/+19
* Fix copy and paste error in prefill_bufferhenryk2007-12-031-1/+8
* Fix FIQ code for SSC TF emulationhenryk2007-12-031-8/+7
* Add dia file with timer design visualisationhenryk2007-12-022-2/+4
* Document the current state of the timers (e.g. what laforge did), partly as a...henryk2007-12-021-0/+59
* Fix power-on logic for the case that the card is already in the fieldhenryk2007-11-301-26/+25
* Fix SSC TX registers (especially the clock source selection), peripheral conf...henryk2007-11-294-7/+65
* Move to prefilling the transmit buffer for faster ATQA responsehenryk2007-11-292-33/+53
* Switch to hardcoded fiq handler implementation directly in the vector table (...henryk2007-11-292-105/+19
* Forgotten filehenryk2007-11-271-0/+5
* Print relevant SSC registershenryk2007-11-273-2/+18
* Restructure irq handling for setting tc_fdt (works now) and to get most iso s...henryk2007-11-265-73/+141
* Added automatic dependency generation to makefilehenryk2007-11-261-2/+11
* Remove unusedhenryk2007-11-261-67/+0
* Prepare transmission codehenryk2007-11-269-112/+265
* Add load modulation and encoding/decoding code from haraldhenryk2007-11-2411-3/+566
* hex and dec ...henryk2007-11-231-1/+1
* Add scale values to the field meterhenryk2007-11-231-2/+5
* Add a work around to have each pio data change fiq followed by a regular IRQ ...henryk2007-11-234-18/+69
* Commit status quo (pending cleanup of the debug and experimental code that I ...henryk2007-11-2311-37/+131
* Remove obsolete codehenryk2007-11-221-28/+6
* Refactor frame print code out and use in iso14443_layer3ahenryk2007-11-222-28/+39
* Add task and command to print a continouos field meterhenryk2007-11-221-1/+54
* new linker file with vector table reservedmeri2007-11-211-3/+8
* Fix hex vs. dechenryk2007-11-211-1/+1
* Add tragically failed (and commented out) attempt to remap ram to addr 0henryk2007-11-211-0/+16
* Revert to revision 336henryk2007-11-211-25/+27
* fixed updated linker filemeri2007-11-211-20/+25
* fixed updated linker filemeri2007-11-211-1/+4
* updated linker filemeri2007-11-211-16/+6
* Commit status quo: Start adding iso 14443 layer 3a codehenryk2007-11-2113-25/+282
* Checking in status quo: Can currently receive and print frames in ssc continu...henryk2007-11-2110-148/+323
* Fight synchronization problemshenryk2007-11-201-3/+31
* Move some definitions to header filehenryk2007-11-192-9/+11
* Add ssc rx start and reboot commandshenryk2007-11-192-2/+25
personal git repositories of Harald Welte. Your mileage may vary