From 514b0f72f50b50b75ef855f008c888f29989d68e Mon Sep 17 00:00:00 2001 From: laforge Date: Wed, 20 Sep 2006 11:44:10 +0000 Subject: - Add OpenPICC register definition (and USB command handling) - Add automatic generation of include/compile.h with svn revision and compiletime - Add openpcd_compile_version structure to obtain version via USB - Move LED commands into new CMD_CLS_GENERIC family - Update TODO - Add support for large (2048 byte) request contexts in addition to 64byte - Shrink req_ctx size by collapsing rx and tx buffer into one - move definition of DFU_API_LOCATION to header file - Implement large req_ctx aware USB transmit / refill routines - Implement TX refilling for IRQ Endpoint - Print version information at startup time - move some generic req_ctx processing into usb_handler.c - Some further work on DFU (still not finished) - Only use '-Os' for DFU, use '-O2' for application code git-svn-id: https://svn.openpcd.org:2342/trunk@208 6dc7ffe9-61d6-0310-9af1-9938baff3ed1 --- firmware/TODO | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'firmware/TODO') diff --git a/firmware/TODO b/firmware/TODO index c63fb89..1d19223 100644 --- a/firmware/TODO +++ b/firmware/TODO @@ -1,19 +1,18 @@ SPI: - use PDC DMA for SPI transfers -- use real SPI clock divisor (4.8MHz) rather than current 320kHz clock RC632: - Fix locking between 'atomic' ops like set/clear bit and RC632 IRQ - Implement VFIFO handling USB: -- don't busy-wait for EP2/EP3 transfers but rather use TX completion IRQ - Implement VFIFO handling -- Add DFU descriptor to host DFU: -- implement DFU protocol for bootloader flash partition -- add capability to copy and execute DFU from RAM +- fix DFU download (usb control write / zlp at end) +- add capability to flash DFU itself +- add a header to the application program, checksum and size +- checksum application image. If wrong, enter DFU recovery mode - Get rid of lots of constant values and replace them by proper defines Generic: -- cgit v1.2.3