From d256545b2fd62d78910efcc6273c3b70abd3aa13 Mon Sep 17 00:00:00 2001 From: laforge Date: Tue, 12 Sep 2006 17:35:30 +0000 Subject: move to new directory git-svn-id: https://svn.openpcd.org:2342/trunk@191 6dc7ffe9-61d6-0310-9af1-9938baff3ed1 --- firmware/src/os/pcd_enumerate.c | 605 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 605 insertions(+) create mode 100644 firmware/src/os/pcd_enumerate.c (limited to 'firmware/src/os/pcd_enumerate.c') diff --git a/firmware/src/os/pcd_enumerate.c b/firmware/src/os/pcd_enumerate.c new file mode 100644 index 0000000..cded8c8 --- /dev/null +++ b/firmware/src/os/pcd_enumerate.c @@ -0,0 +1,605 @@ +/* AT91SAM7 USB interface code for OpenPCD + * + * (C) 2006 by Harald Welte + * + * based on existing AT91SAM7 UDP CDC ACM example code, licensed as followed: + *---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support - ROUSSET - + *---------------------------------------------------------------------------- + * The software is delivered "AS IS" without warranty or condition of any + * kind, either express, implied or statutory. This includes without + * limitation any warranty or condition with respect to merchantability or + * fitness for any particular purpose, or against the infringements of + * intellectual property rights of others. + *---------------------------------------------------------------------------- + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "../openpcd.h" +#include + +#define DEBUG_UDP_IRQ +#define DEBUG_UDP_EP0 + +#define CONFIG_DFU + +#define AT91C_EP_OUT 1 +#define AT91C_EP_OUT_SIZE 0x40 +#define AT91C_EP_IN 2 +#define AT91C_EP_IN_SIZE 0x40 +#define AT91C_EP_INT 3 + +#ifdef CONFIG_DFU +#define DFU_API_LOCATION ((const struct dfuapi *) 0x00102100) +static const struct dfuapi *dfu = DFU_API_LOCATION; +#define udp_ep0_send_data dfu->ep0_send_data +#define udp_ep0_send_zlp dfu->ep0_send_zlp +#define udp_ep0_send_stall dfu->ep0_send_stall +#else +#error non-DFU builds currently not supported (yet) again +#endif + +static struct udp_pcd upcd; + +const struct usb_device_descriptor dev_descriptor = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = USB_CLASS_VENDOR_SPEC, + .bDeviceSubClass = 0xff, + .bDeviceProtocol = 0xff, + .bMaxPacketSize0 = 0x08, + .idVendor = OPENPCD_VENDOR_ID, + .idProduct = OPENPCD_PRODUCT_ID, + .bcdDevice = 0x0000, + .iManufacturer = 0x00, + .iProduct = 0x00, + .iSerialNumber = 0x00, + .bNumConfigurations = 0x01, +}; + +struct _desc { + struct usb_config_descriptor ucfg; + struct usb_interface_descriptor uif; + struct usb_endpoint_descriptor ep[3]; +#ifdef CONFIG_DFU + struct usb_interface_descriptor uif_dfu; + struct usb_dfu_func_descriptor func_dfu; +#endif +}; + +const struct _desc cfg_descriptor = { + .ucfg = { + .bLength = USB_DT_CONFIG_SIZE, + .bDescriptorType = USB_DT_CONFIG, + .wTotalLength = USB_DT_CONFIG_SIZE + +#ifdef CONFIG_DFU + 2 * USB_DT_INTERFACE_SIZE + + 3 * USB_DT_ENDPOINT_SIZE + + USB_DT_DFU_SIZE, + .bNumInterfaces = 2, +#else + 1 * USB_DT_INTERFACE_SIZE + + 3 * USB_DT_ENDPOINT_SIZE, + .bNumInterfaces = 1, +#endif + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = USB_CONFIG_ATT_ONE, + .bMaxPower = 100, /* 200mA */ + }, + .uif = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 3, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0xff, + .iInterface = 0, + }, + .ep= { + { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = OPENPCD_OUT_EP, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = AT91C_EP_OUT_SIZE, + .bInterval = 0x00, + }, { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = OPENPCD_IN_EP, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = AT91C_EP_IN_SIZE, + .bInterval = 0x00, + }, { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = OPENPCD_IRQ_EP, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = AT91C_EP_IN_SIZE, + .bInterval = 0xff, /* FIXME */ + }, + }, +#ifdef CONFIG_DFU + .uif_dfu = DFU_RT_IF_DESC, + .func_dfu = DFU_FUNC_DESC, +#endif +}; + +static const struct usb_string_descriptor string0 = { + .bLength = sizeof(string0), + .bDescriptorType = USB_DT_STRING, + .wData[0] = 0x0409, /* English */ +}; + + +static void udp_ep0_handler(void); + +void udp_unthrottle(void) +{ + AT91PS_UDP pUDP = upcd.pUdp; + pUDP->UDP_IER = AT91C_UDP_EPINT1; +} + +int udp_refill_ep(int ep, struct req_ctx *rctx) +{ + u_int16_t i; + AT91PS_UDP pUDP = upcd.pUdp; + + if (!upcd.cur_config) + return -ENXIO; + + if (rctx->tx.tot_len > AT91C_EP_IN_SIZE) { + DEBUGPCRF("TOO LARGE!!!!!!!!!!!!!!!!!!!!!!!!!!! (%d > %d)", + rctx->tx.tot_len, AT91C_EP_IN_SIZE); + return -EINVAL; + } + + if (atomic_read(&upcd.ep[ep].pkts_in_transit) == 2) + return -EBUSY; + + /* fill FIFO/DPR */ + for (i = 0; i < rctx->tx.tot_len; i++) + pUDP->UDP_FDR[ep] = rctx->tx.data[i]; + + if (atomic_inc_return(&upcd.ep[ep].pkts_in_transit) == 1) { + /* not been transmitting before, start transmit */ + pUDP->UDP_CSR[ep] |= AT91C_UDP_TXPKTRDY; + } + + /* return rctx to pool of free contexts */ + req_ctx_put(rctx); + + return 0; +} + +#ifdef DEBUG_UDP_IRQ +#define DEBUGI(x, args ...) DEBUGP(x, ## args) +#else +#define DEBUGI(x, args ...) do { } while (0) +#endif + +static void udp_irq(void) +{ + u_int32_t csr; + AT91PS_UDP pUDP = upcd.pUdp; + AT91_REG isr = pUDP->UDP_ISR; + + DEBUGI("udp_irq(imr=0x%04x, isr=0x%04x): ", pUDP->UDP_IMR, isr); + + if (isr & AT91C_UDP_ENDBUSRES) { + DEBUGI("ENDBUSRES "); + pUDP->UDP_ICR = AT91C_UDP_ENDBUSRES; + pUDP->UDP_IER = AT91C_UDP_EPINT0; + /* reset all endpoints */ + pUDP->UDP_RSTEP = (unsigned int)-1; + pUDP->UDP_RSTEP = 0; + /* Enable the function */ + pUDP->UDP_FADDR = AT91C_UDP_FEN; + /* Configure endpoint 0 */ + pUDP->UDP_CSR[0] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL); + upcd.cur_config = 0; + +#ifdef CONFIG_DFU + if (*dfu->dfu_state == DFU_STATE_appDETACH) { + /* now we need to switch to DFU mode */ + dfu->dfu_switch(); + } +#endif + } + + if (isr & AT91C_UDP_EPINT0) { + DEBUGI("EP0INT(Control) "); + udp_ep0_handler(); + } + if (isr & AT91C_UDP_EPINT1) { + u_int32_t cur_rcv_bank = upcd.cur_rcv_bank; + csr = pUDP->UDP_CSR[1]; + DEBUGI("EP1INT(Out, CSR=0x%08x) ", csr); + if (cur_rcv_bank == AT91C_UDP_RX_DATA_BK1) + DEBUGI("cur_bank=1 "); + else if (cur_rcv_bank == AT91C_UDP_RX_DATA_BK0) + DEBUGI("cur_bank=0 "); + else + DEBUGI("cur_bank INVALID "); + + if (csr & AT91C_UDP_RX_DATA_BK1) + DEBUGI("BANK1 "); + if (csr & AT91C_UDP_RX_DATA_BK0) + DEBUGI("BANK0 "); + + if (csr & cur_rcv_bank) { + u_int16_t pkt_recv = 0; + u_int16_t pkt_size = csr >> 16; + struct req_ctx *rctx = req_ctx_find_get(RCTX_STATE_FREE, + RCTX_STATE_UDP_RCV_BUSY); + + if (rctx) { + rctx->rx.tot_len = pkt_size; + while (pkt_size--) + rctx->rx.data[pkt_recv++] = pUDP->UDP_FDR[1]; + pUDP->UDP_CSR[1] &= ~cur_rcv_bank; + if (cur_rcv_bank == AT91C_UDP_RX_DATA_BK0) + cur_rcv_bank = AT91C_UDP_RX_DATA_BK1; + else + cur_rcv_bank = AT91C_UDP_RX_DATA_BK0; + upcd.cur_rcv_bank = cur_rcv_bank; + req_ctx_set_state(rctx, RCTX_STATE_UDP_RCV_DONE); + DEBUGI("RCTX=%u ", req_ctx_num(rctx)); + } else { + /* disable interrupts for now */ + pUDP->UDP_IDR = AT91C_UDP_EPINT1; + DEBUGP("NO_RCTX_AVAIL! "); + } + } + } + if (isr & AT91C_UDP_EPINT2) { + csr = pUDP->UDP_CSR[2]; + DEBUGI("EP2INT(In, CSR=0x%08x) ", csr); + if (csr & AT91C_UDP_TXCOMP) { + struct req_ctx *rctx; + + DEBUGI("ACK_TX_COMP "); + /* acknowledge TX completion */ + pUDP->UDP_CSR[2] &= ~AT91C_UDP_TXCOMP; + while (pUDP->UDP_CSR[2] & AT91C_UDP_TXCOMP) ; + + /* if we already have another packet in DPR, send it */ + if (atomic_dec_return(&upcd.ep[2].pkts_in_transit) == 1) + pUDP->UDP_CSR[2] |= AT91C_UDP_TXPKTRDY; + + /* try to re-fill from pending rcts for EP2 */ + rctx = req_ctx_find_get(RCTX_STATE_UDP_EP2_PENDING, + RCTX_STATE_UDP_EP2_BUSY); + if (rctx) + udp_refill_ep(2, rctx); + else + DEBUGI("NO_RCTX_pending "); + } + } + if (isr & AT91C_UDP_EPINT3) { + csr = pUDP->UDP_CSR[3]; + DEBUGI("EP3INT(Interrupt, CSR=0x%08x) ", csr); + /* Transmit has completed, re-fill from pending rcts for EP3 */ + } + + if (isr & AT91C_UDP_RXSUSP) { + pUDP->UDP_ICR = AT91C_UDP_RXSUSP; + DEBUGI("RXSUSP "); + /* FIXME: implement suspend/resume */ + } + if (isr & AT91C_UDP_RXRSM) { + pUDP->UDP_ICR = AT91C_UDP_RXRSM; + DEBUGI("RXRSM "); + /* FIXME: implement suspend/resume */ + } + if (isr & AT91C_UDP_EXTRSM) { + pUDP->UDP_ICR = AT91C_UDP_EXTRSM; + DEBUGI("EXTRSM "); + /* FIXME: implement suspend/resume */ + } + if (isr & AT91C_UDP_SOFINT) { + pUDP->UDP_ICR = AT91C_UDP_SOFINT; + DEBUGI("SOFINT "); + } + if (isr & AT91C_UDP_WAKEUP) { + pUDP->UDP_ICR = AT91C_UDP_WAKEUP; + DEBUGI("WAKEUP "); + /* FIXME: implement suspend/resume */ + } + + DEBUGI("END\r\n"); + AT91F_AIC_ClearIt(AT91C_BASE_AIC, AT91C_ID_UDP); +} + +/* Open USB Device Port */ +void udp_open(void) +{ + DEBUGPCRF("entering"); + upcd.pUdp = AT91C_BASE_UDP; + upcd.cur_config = 0; + upcd.cur_rcv_bank = AT91C_UDP_RX_DATA_BK0; + + AT91F_AIC_ConfigureIt(AT91C_BASE_AIC, AT91C_ID_UDP, + OPENPCD_IRQ_PRIO_UDP, + AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL, udp_irq); + AT91F_AIC_EnableIt(AT91C_BASE_AIC, AT91C_ID_UDP); + + /* End-of-Bus-Reset is always enabled */ + + /* Set the Pull up resistor */ + AT91F_PIO_CfgOutput(AT91C_BASE_PIOA, OPENPCD_PIO_UDP_PUP); + AT91F_PIO_SetOutput(AT91C_BASE_PIOA, OPENPCD_PIO_UDP_PUP); +} + +void udp_reset(void) +{ + volatile int i; + + AT91F_PIO_ClearOutput(AT91C_BASE_PIOA, OPENPCD_PIO_UDP_PUP); + for (i = 0; i < 0xffff; i++) + ; + AT91F_PIO_SetOutput(AT91C_BASE_PIOA, OPENPCD_PIO_UDP_PUP); +} + +#ifdef DEBUG_UDP_EP0 +#define DEBUGE(x, args ...) DEBUGP(x, ## args) +#else +#define DEBUGE(x, args ...) do { } while (0) +#endif + +/* Handle requests on the USB Control Endpoint */ +static void udp_ep0_handler(void) +{ + AT91PS_UDP pUDP = upcd.pUdp; + u_int8_t bmRequestType, bRequest; + u_int16_t wValue, wIndex, wLength, wStatus; + u_int32_t csr = pUDP->UDP_CSR[0]; + + DEBUGE("CSR=0x%04x ", csr); + + if (csr & AT91C_UDP_STALLSENT) { + DEBUGE("ACK_STALLSENT "); + pUDP->UDP_CSR[0] = ~AT91C_UDP_STALLSENT; + } + + if (csr & AT91C_UDP_RX_DATA_BK0) { + DEBUGE("ACK_BANK0 "); + pUDP->UDP_CSR[0] &= ~AT91C_UDP_RX_DATA_BK0; + } + + if (!(csr & AT91C_UDP_RXSETUP)) { + DEBUGE("no setup packet "); + return; + } + + DEBUGE("len=%d ", csr >> 16); + if (csr >> 16 == 0) { + DEBUGE("empty packet "); + return; + } + + bmRequestType = pUDP->UDP_FDR[0]; + bRequest = pUDP->UDP_FDR[0]; + wValue = (pUDP->UDP_FDR[0] & 0xFF); + wValue |= (pUDP->UDP_FDR[0] << 8); + wIndex = (pUDP->UDP_FDR[0] & 0xFF); + wIndex |= (pUDP->UDP_FDR[0] << 8); + wLength = (pUDP->UDP_FDR[0] & 0xFF); + wLength |= (pUDP->UDP_FDR[0] << 8); + + DEBUGE("bmRequestType=0x%2x ", bmRequestType); + + if (bmRequestType & 0x80) { + DEBUGE("DATA_IN=1 "); + pUDP->UDP_CSR[0] |= AT91C_UDP_DIR; + while (!(pUDP->UDP_CSR[0] & AT91C_UDP_DIR)) ; + } + pUDP->UDP_CSR[0] &= ~AT91C_UDP_RXSETUP; + while ((pUDP->UDP_CSR[0] & AT91C_UDP_RXSETUP)) ; + + /* Handle supported standard device request Cf Table 9-3 in USB + * speciication Rev 1.1 */ + switch ((bRequest << 8) | bmRequestType) { + case STD_GET_DESCRIPTOR: + DEBUGE("GET_DESCRIPTOR "); + if (wValue == 0x100) { + /* Return Device Descriptor */ +#ifdef CONFIG_DFU + if (*dfu->dfu_state != DFU_STATE_appIDLE) + udp_ep0_send_data((const char *) + dfu->dfu_dev_descriptor, + MIN(dfu->dfu_dev_descriptor->bLength, + wLength)); + else +#endif + udp_ep0_send_data((const char *) &dev_descriptor, + MIN(sizeof(dev_descriptor), wLength)); + } else if (wValue == 0x200) { + /* Return Configuration Descriptor */ +#ifdef CONFIG_DFU + if (*dfu->dfu_state != DFU_STATE_appIDLE) + udp_ep0_send_data((const char *) + dfu->dfu_cfg_descriptor, + MIN(dfu->dfu_cfg_descriptor->ucfg.wTotalLength, + wLength)); + else +#endif + udp_ep0_send_data((const char *) &cfg_descriptor, + MIN(sizeof(cfg_descriptor), wLength)); + } else if (wValue == 0x300) { + /* Return String descriptor */ + switch (wIndex) { + case 0: + udp_ep0_send_data((const char *) &string0, + MIN(sizeof(string0), wLength)); + break; + default: + /* FIXME: implement this */ + udp_ep0_send_stall(); + break; + } +#if 0 + } else if (wValue == 0x400) { + /* Return Interface descriptor */ + if (wIndex != 0x01) + udp_ep0_send_stall(); + udp_ep0_send_data((const char *) + &dfu_if_descriptor, + MIN(sizeof(dfu_if_descriptor), + wLength)); +#endif + } else + udp_ep0_send_stall(); + break; + case STD_SET_ADDRESS: + DEBUGE("SET_ADDRESS "); + udp_ep0_send_zlp(); + pUDP->UDP_FADDR = (AT91C_UDP_FEN | wValue); + pUDP->UDP_GLBSTATE = (wValue) ? AT91C_UDP_FADDEN : 0; + break; + case STD_SET_CONFIGURATION: + DEBUGE("SET_CONFIG "); + if (wValue) + DEBUGE("VALUE!=0 "); + upcd.cur_config = wValue; + udp_ep0_send_zlp(); + pUDP->UDP_GLBSTATE = + (wValue) ? AT91C_UDP_CONFG : AT91C_UDP_FADDEN; + pUDP->UDP_CSR[1] = + (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT) : + 0; + pUDP->UDP_CSR[2] = + (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN) : 0; + pUDP->UDP_CSR[3] = + (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN) : 0; + pUDP->UDP_IER = (AT91C_UDP_EPINT0|AT91C_UDP_EPINT1| + AT91C_UDP_EPINT2|AT91C_UDP_EPINT3); + break; + case STD_GET_CONFIGURATION: + DEBUGE("GET_CONFIG "); + udp_ep0_send_data((char *)&(upcd.cur_config), + sizeof(upcd.cur_config)); + break; + case STD_GET_STATUS_ZERO: + DEBUGE("GET_STATUS_ZERO "); + wStatus = 0; + udp_ep0_send_data((char *)&wStatus, sizeof(wStatus)); + break; + case STD_GET_STATUS_INTERFACE: + DEBUGE("GET_STATUS_INTERFACE "); + wStatus = 0; + udp_ep0_send_data((char *)&wStatus, sizeof(wStatus)); + break; + case STD_GET_STATUS_ENDPOINT: + DEBUGE("GET_STATUS_ENDPOINT(EPidx=%u) ", wIndex&0x0f); + wStatus = 0; + wIndex &= 0x0F; + if ((pUDP->UDP_GLBSTATE & AT91C_UDP_CONFG) && (wIndex <= 3)) { + wStatus = + (pUDP->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; + udp_ep0_send_data((char *)&wStatus, + sizeof(wStatus)); + } else if ((pUDP->UDP_GLBSTATE & AT91C_UDP_FADDEN) + && (wIndex == 0)) { + wStatus = + (pUDP->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; + udp_ep0_send_data((char *)&wStatus, + sizeof(wStatus)); + } else + udp_ep0_send_stall(); + break; + case STD_SET_FEATURE_ZERO: + DEBUGE("SET_FEATURE_ZERO "); + udp_ep0_send_stall(); + break; + case STD_SET_FEATURE_INTERFACE: + DEBUGE("SET_FEATURE_INTERFACE "); + udp_ep0_send_zlp(); + break; + case STD_SET_FEATURE_ENDPOINT: + DEBUGE("SET_FEATURE_ENDPOINT "); + udp_ep0_send_zlp(); + wIndex &= 0x0F; + if ((wValue == 0) && wIndex && (wIndex <= 3)) { + pUDP->UDP_CSR[wIndex] = 0; + udp_ep0_send_zlp(); + } else + udp_ep0_send_stall(); + break; + case STD_CLEAR_FEATURE_ZERO: + DEBUGE("CLEAR_FEATURE_ZERO "); + udp_ep0_send_stall(); + break; + case STD_CLEAR_FEATURE_INTERFACE: + DEBUGP("CLEAR_FEATURE_INTERFACE "); + udp_ep0_send_zlp(); + break; + case STD_CLEAR_FEATURE_ENDPOINT: + DEBUGE("CLEAR_FEATURE_ENDPOINT(EPidx=%u) ", wIndex & 0x0f); + wIndex &= 0x0F; + if ((wValue == 0) && wIndex && (wIndex <= 3)) { + struct req_ctx *rctx; + if (wIndex == 1) { + pUDP->UDP_CSR[1] = + (AT91C_UDP_EPEDS | + AT91C_UDP_EPTYPE_BULK_OUT); + pUDP->UDP_RSTEP |= AT91C_UDP_EP1; + pUDP->UDP_RSTEP &= ~AT91C_UDP_EP1; + } + else if (wIndex == 2) { + pUDP->UDP_CSR[2] = + (AT91C_UDP_EPEDS | + AT91C_UDP_EPTYPE_BULK_IN); + pUDP->UDP_RSTEP |= AT91C_UDP_EP2; + pUDP->UDP_RSTEP &= ~AT91C_UDP_EP2; + + /* free all currently transmitting contexts */ + while (rctx = req_ctx_find_get(RCTX_STATE_UDP_EP2_BUSY, + RCTX_STATE_FREE)) {} + atomic_set(&upcd.ep[wIndex].pkts_in_transit, 0); + } + else if (wIndex == 3) { + pUDP->UDP_CSR[3] = + (AT91C_UDP_EPEDS | + AT91C_UDP_EPTYPE_INT_IN); + pUDP->UDP_RSTEP |= AT91C_UDP_EP3; + pUDP->UDP_RSTEP &= ~AT91C_UDP_EP3; + + /* free all currently transmitting contexts */ + while (rctx = req_ctx_find_get(RCTX_STATE_UDP_EP3_BUSY, + RCTX_STATE_FREE)) {} + atomic_set(&upcd.ep[wIndex].pkts_in_transit, 0); + } + udp_ep0_send_zlp(); + } else + udp_ep0_send_stall(); + break; + case STD_SET_INTERFACE: + DEBUGE("SET INTERFACE "); + udp_ep0_send_stall(); + break; + default: + DEBUGE("DEFAULT(req=0x%02x, type=0x%02x) ", bRequest, bmRequestType); +#ifdef CONFIG_DFU + if ((bmRequestType & 0x3f) == USB_TYPE_DFU) { + dfu->dfu_ep0_handler(bmRequestType, bRequest, wValue, wLength); + } else +#endif + udp_ep0_send_stall(); + break; + } +} + -- cgit v1.2.3