From 1dfa375abb95c59830c38697c53fa9a6794a9fb9 Mon Sep 17 00:00:00 2001 From: henryk Date: Sun, 11 Nov 2007 19:24:37 +0000 Subject: Add code modules for tc_fdt, tc_cdiv_sync, tc_cdiv, ssc_picc Almost all of these have not been checked yet, I just copied them over and hot-fixed compile time errors F.e. all ssc usb code has been removed git-svn-id: https://svn.openpcd.org:2342/trunk@323 6dc7ffe9-61d6-0310-9af1-9938baff3ed1 --- openpicc/application/tc_fdt.c | 126 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) create mode 100644 openpicc/application/tc_fdt.c (limited to 'openpicc/application/tc_fdt.c') diff --git a/openpicc/application/tc_fdt.c b/openpicc/application/tc_fdt.c new file mode 100644 index 0000000..55da9ca --- /dev/null +++ b/openpicc/application/tc_fdt.c @@ -0,0 +1,126 @@ +/* OpenPICC TC (Timer / Clock) support code + * (C) 2006 by Harald Welte + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + + +/* PICC Simulator Side: + * In order to support responding to synchronous frames (REQA/WUPA/ANTICOL), + * we need a second Timer/Counter (TC2). This unit is reset by an external + * event (rising edge of modulation pause PCD->PICC, falling edge of + * demodulated data) connected to TIOB2, and counts up to a configurable + * number of carrier clock cycles (RA). Once the RA value is reached, TIOA2 + * will see a rising edge. This rising edge will be interconnected to TF (Tx + * Frame) of the SSC to start transmitting our synchronous response. + * + */ + +#include +#include +#include "dbgu.h" + +#include "openpicc.h" +#include "tc_cdiv.h" +#include "tc_fdt.h" + +static AT91PS_TC tcfdt = AT91C_BASE_TC2; + +void tc_fdt_set(u_int16_t count) +{ + tcfdt->TC_RA = count; +} + + +/* 'count' number of carrier cycles after the last modulation pause, + * we deem the frame to have ended */ +void tc_frame_end_set(u_int16_t count) +{ + tcfdt->TC_RB = count; +} + +static void tc_fdt_irq(void) +{ + u_int32_t sr = tcfdt->TC_SR; + DEBUGP("tc_fdt_irq: TC2_SR=0x%08x TC2_CV=0x%08x ", + sr, tcfdt->TC_CV); + + if (sr & AT91C_TC_ETRGS) { + DEBUGP("Ext_trigger "); + } + if (sr & AT91C_TC_CPAS) { + DEBUGP("FDT_expired "); + /* FIXME: if we are in anticol / sync mode, + * we could do software triggering of SSC TX, + * but IIRC the hardware does this by TF */ + } + if (sr & AT91C_TC_CPBS) { + DEBUGP("Frame_end "); + /* FIXME: stop ssc (in continuous mode), + * take care of preparing synchronous response if + * we operate in anticol mode.*/ + } + if (sr & AT91C_TC_CPCS) { + DEBUGP("Compare_C "); + } + DEBUGPCR(""); +} + +void tc_fdt_print(void) +{ + DEBUGP("TC2_CV=0x%08x ", tcfdt->TC_CV); + DEBUGP("TC2_CMR=0x%08x ", tcfdt->TC_CMR); + DEBUGP("TC2_SR=0x%08x ", tcfdt->TC_SR); + DEBUGP("TC2_RA=0x%04x, TC2_RB=0x%04x, TC2_RC=0x%04x", + tcfdt->TC_RA, tcfdt->TC_RB, tcfdt->TC_RC); +} + +void tc_fdt_init(void) +{ + AT91F_PIO_CfgPeriph(AT91C_BASE_PIOA, AT91C_PA15_TF, + AT91C_PA26_TIOA2 | AT91C_PA27_TIOB2); + AT91F_PMC_EnablePeriphClock(AT91C_BASE_PMC, + ((unsigned int) 1 << AT91C_ID_TC2)); + /* Enable Clock for TC2 */ + tcfdt->TC_CCR = AT91C_TC_CLKEN; + + tcfdt->TC_RC = 0xffff; + tc_frame_end_set(128*2); + + /* Clock XC1, Wave Mode, No automatic reset on RC comp + * TIOA2 in RA comp = set, TIOA2 on RC comp = clear, + * TIOA2 on EEVT = clear + * TIOB2 as input, EEVT = TIOB2, Reset/Trigger on EEVT */ + tcfdt->TC_CMR = AT91C_TC_CLKS_XC1 | AT91C_TC_WAVE | + AT91C_TC_WAVESEL_UP | + AT91C_TC_ACPA_SET | AT91C_TC_ACPC_CLEAR | + AT91C_TC_AEEVT_CLEAR | + AT91C_TC_BEEVT_NONE | AT91C_TC_BCPB_NONE | + AT91C_TC_EEVT_TIOB | AT91C_TC_ETRGEDG_FALLING | + AT91C_TC_ENETRG | AT91C_TC_CPCSTOP ; + + /* Reset to start timers */ + tcb->TCB_BCR = 1; + + AT91F_AIC_ConfigureIt(AT91C_ID_TC2, + OPENPCD_IRQ_PRIO_TC_FDT, + AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL, &tc_fdt_irq); + AT91F_AIC_EnableIt(AT91C_ID_TC2); + + tcfdt->TC_IER = AT91C_TC_CPAS | AT91C_TC_CPBS | AT91C_TC_CPCS | + AT91C_TC_ETRGS; +} + -- cgit v1.2.3