//*----------------------------------------------------------------------------
//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
//*----------------------------------------------------------------------------
//* The software is delivered "AS IS" without warranty or condition of any
//* kind, either express, implied or statutory. This includes without
//* limitation any warranty or condition with respect to merchantability or
//* fitness for any particular purpose, or against the infringements of
//* intellectual property rights of others.
//*----------------------------------------------------------------------------
//* File Name           : Cstartup_SAM7.c
//* Object              : Low level initializations written in C for IAR
//*                       tools
//* 1.0   08/Sep/04 JPP : Creation
//* 1.10  10/Sep/04 JPP : Update AT91C_CKGR_PLLCOUNT filed
//*----------------------------------------------------------------------------


// Include the board file description
#include <board.h>
// For memcpy
#include <string.h>

//*----------------------------------------------------------------------------
//* \fn    AT91F_LowLevelInit
//* \brief This function performs very low level HW initialization
//*        this function can be use a Stack, depending the compilation
//*        optimization mode
//*----------------------------------------------------------------------------
void AT91F_LowLevelInit (void)
{
    AT91PS_PMC pPMC = AT91C_BASE_PMC;

    //* Set flash wait state
    //  Single Cycle Access at Up to 30 MHz, or 40
    //  if MCK = 47923200 I have 50 Cycle for 1 useconde ( flied MC_FMR->FMCN
    AT91C_BASE_MC->MC_FMR = ((AT91C_MC_FMCN) & (75 << 16)) | AT91C_MC_FWS_1FWS;

    //* Watchdog Enable
    AT91C_BASE_WDTC->WDTC_WDMR = (0x180 << 16) | AT91C_WDTC_WDRSTEN | 0x180;
    //AT91C_BASE_WDTC->WDTC_WDMR = 0x8000;

    //* Set MCK at 47 923 200
    // 1 Enabling the Main Oscillator:
    // SCK = 1/32768 = 30.51 uSeconde
    // Start up time = 8 * 6 / SCK = 56 * 30.51 = 1,46484375 ms
    pPMC->PMC_MOR = (((AT91C_CKGR_OSCOUNT & (0x06 << 8)) | AT91C_CKGR_MOSCEN));
    // Wait the startup time

    while (!(pPMC->PMC_SR & AT91C_PMC_MOSCS));
    // 2 Checking the Main Oscillator Frequency (Optional)
    // 3 Setting PLL and divider:
    // - div by 5 Fin = 3,6864 =(18,432 / 5)
    // - Mul 25+1: Fout =   95,8464 =(3,6864 *26)
    // for 96 MHz the erroe is 0.16%
    //eld out NOT USED = 0 Fi
    pPMC->PMC_PLLR = ((AT91C_CKGR_DIV & 5) |
		     (AT91C_CKGR_PLLCOUNT & (28 << 8)) |
		     (AT91C_CKGR_MUL & (25 << 16)));

    // Wait the startup time
    while (!(pPMC->PMC_SR & AT91C_PMC_LOCK));
    
    // 4. Selection of Master Clock and Processor Clock
    // select the PLL clock divided by 2
    pPMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
    while (!(pPMC->PMC_SR & AT91C_PMC_MCKRDY));

    pPMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK;
    while (!(pPMC->PMC_SR & AT91C_PMC_MCKRDY));
    
    /* Copy first 0x200 bytes (IRQ vector table and FIQ) to RAM */
    memcpy((void*)0x00200000, (void*)0x00100000, 0x200);
    /* Perform remap FIXME doesn't work*/
    // AT91C_BASE_MC->MC_RCR = AT91C_MC_RCB;
}