1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
|
/* main_reqa - OpenPCD firmware for generating an endless loop of
* ISO 14443-A REQA packets.
*
* If a response is received from the PICC, LED1 (Red) will be switched
* on. If no valid response has been received within the timeout of the
* receiver, LED1 (Red) will be switched off.
*
*/
#include <errno.h>
#include <string.h>
#include <librfid/rfid_layer2_iso14443a.h>
#include "rc632.h"
#include <os/dbgu.h>
#include <os/led.h>
#include <os/trigger.h>
#include <os/pcd_enumerate.h>
#include <os/main.h>
void _init_func(void)
{
trigger_init();
rc632_init();
DEBUGPCRF("turning on RF");
rc632_turn_on_rf(RAH);
/* FIXME: do we need this? */
DEBUGPCRF("initializing 14443A operation");
rc632_iso14443a_init(RAH);
/* Switch to 848kBps (1subcp / bit) */
//rc632_clear_bits(RAH, RC632_REG_RX_CONTROL1, RC632_RXCTRL1_SUBCP_MASK);
}
int _main_dbgu(char key)
{
static char ana_out_sel;
int ret = -EINVAL;
switch (key) {
case 'q':
ana_out_sel--;
ret = 1;
break;
case 'w':
ana_out_sel++;
ret = 1;
break;
case 'c':
rc632_turn_on_rf(RAH);
break;
case 'o':
rc632_turn_off_rf(RAH);
break;
}
if (ana_out_sel >= 0xd)
ana_out_sel = 0;
if (ret == 1) {
ana_out_sel &= 0x0f;
DEBUGPCR("switching to analog output mode 0x%x\n", ana_out_sel);
rc632_reg_write(RAH, RC632_REG_TEST_ANA_SELECT, ana_out_sel);
}
return ret;
}
void _main_func(void)
{
#if 1
struct iso14443a_atqa atqa;
memset(&atqa, 0, sizeof(atqa));
trigger_pulse();
if (rc632_iso14443a_transceive_sf(RAH, ISO14443A_SF_CMD_WUPA, &atqa) < 0) {
DEBUGPCRF("error during transceive_sf");
led_switch(1, 0);
} else {
DEBUGPCRF("received ATQA: %s\n", hexdump((char *)&atqa, sizeof(atqa)));
led_switch(1, 1);
}
#endif
led_toggle(2);
}
|
