1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
|
/* AT91SAM7 PWM routines for OpenPCD / OpenPICC
*
* (C) 2006 by Harald Welte <hwelte@hmw-consulting.de>
*
*/
#include <lib_AT91SAM7.h>
#include <AT91SAM7.h>
#include <sys/types.h>
#include <errno.h>
#include "dbgu.h"
#define Hz
#define kHz *1000 Hz
#define MHz *1000 kHz
#define MCLK (48 MHz)
#if 1
#define DEBUGPWM DEBUGPCRF
#else
#define DEBUGPWM(x, args...)
#endif
static AT91PS_PWMC pwm = AT91C_BASE_PWMC;
/* find highest bit set. returns bit (32..1) or 0 in case no bit set */
static int fhs(u_int32_t val)
{
int i;
for (i = 32; i > 0; i--) {
if (val & (1 << (i-1)))
return i;
}
return 0;
}
/* set frequency of PWM signal to freq */
int pwm_freq_set(int channel, u_int32_t freq)
{
/* in order to get maximum resolution, the pre-scaler must be set to
* something like freq << 16. However, the mimimum pre-scaled frequency
* we can get is MCLK (48MHz), the minimum is MCLK/(1024*255) =
* 48MHz/261120 = 183Hz */
u_int32_t overall_div;
u_int32_t presc_total;
u_int8_t cpre = 0;
u_int16_t cprd;
if (freq > MCLK)
return -ERANGE;
overall_div = MCLK / freq;
DEBUGPCRF("mclk=%u, freq=%u, overall_div=%u", MCLK, freq, overall_div);
if (overall_div > 0x7fff) {
/* divisor is larger than half the maximum CPRD register, we
* have to configure prescalers */
presc_total = overall_div >> 15;
/* find highest 2^n fitting in prescaler (highest bit set) */
cpre = fhs(presc_total);
if (cpre > 0) {
/* subtract one, because of fhs semantics */
cpre--;
}
cprd = overall_div / (1 << cpre);
} else
cprd = overall_div;
DEBUGPCRF("cpre=%u, cprd=%u", cpre, cprd);
AT91F_PWMC_CfgChannel(AT91C_BASE_PWMC, channel,
cpre|AT91C_PWMC_CPOL, cprd, 1);
return 0;
}
void pwm_start(int channel)
{
AT91F_PWMC_StartChannel(AT91C_BASE_PWMC, (1 << channel));
}
void pwm_stop(int channel)
{
AT91F_PWMC_StopChannel(AT91C_BASE_PWMC, (1 << channel));
}
void pwm_duty_set_percent(int channel, u_int16_t duty)
{
u_int32_t tmp = pwm->PWMC_CH[channel].PWMC_CPRDR & 0xffff;
tmp = tmp << 16; /* extend value by 2^16 */
tmp = tmp / 100; /* tmp = 1 % of extended cprd */
tmp = duty * tmp; /* tmp = 'duty' % of extended cprd */
tmp = tmp >> 16; /* un-extend tmp (divide by 2^16) */
DEBUGPWM("Writing %u to Update register\n", tmp);
AT91F_PWMC_UpdateChannel(AT91C_BASE_PWMC, channel, tmp);
}
void pwm_init(void)
{
/* Set PA0 to Peripheral A (PWM0) */
AT91F_PIO_CfgPeriph(AT91C_BASE_PIOA, AT91C_PA0_PWM0, 0);
/* Enable Clock for PWM controller */
AT91F_PWMC_CfgPMC();
}
void pwm_fini(void)
{
AT91F_PMC_DisablePeriphClock(AT91C_BASE_PMC, (1 << AT91C_ID_PWMC));
}
|