1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
|
/***************************************************************
*
* OpenPICC - T/C based dumb sniffer
*
* TC2 will reset its value on each falling edge of SSC_DATA, we
* will have the FIQ store the TC2 value on each rising edge of
* SSC_DATA. This will give us a count of carrier cycles between
* modulation pauses which should be enough information to decode
* the modified miller encoding.
*
* Copyright 2008 Henryk Plötz <henryk@ploetzli.ch>
*
***************************************************************
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <FreeRTOS.h>
#include <openpicc.h>
#include <task.h>
#include <string.h>
#include <USB-CDC.h>
#include "tc_sniffer.h"
#include "load_modulation.h"
#include "pll.h"
#include "tc_fdt.h"
#include "usb_print.h"
#include "cmd.h"
#include "pio_irq.h"
#include "led.h"
#include "clock_switch.h"
#include "iso14443a_diffmiller.h"
/* Problem: We want to receive data from the FIQ without locking (the FIQ must not be blocked ever)
* Strategy: Double buffering.
*/
struct diffmiller_state *decoder;
iso14443_frame rx_frame;
#define BUFSIZE 1024
#define WAIT_TICKS (20*portTICK_RATE_MS)
typedef struct {
u_int32_t count;
u_int32_t data[BUFSIZE];
} fiq_buffer_t;
fiq_buffer_t fiq_buffers[2];
fiq_buffer_t *tc_sniffer_next_buffer_for_fiq = 0;
portBASE_TYPE currently_sniffing = 0;
enum { NONE, REQUEST_START, REQUEST_STOP } request_change = REQUEST_START;
//#define PRINT_TIMES
//#define USE_BINARY_PROTOCOL
#define MIN(a, b) ((a)>(b)?(b):(a))
static int overruns = 0;
void flush_buffer(fiq_buffer_t *buffer)
{
/* Write all data from the given buffer out, then zero the count */
if(buffer->count > 0) {
if(buffer->count >= BUFSIZE) {
DumpStringToUSB("Warning: Possible buffer overrun detected\n\r");
overruns++;
}
buffer->count = MIN(buffer->count, BUFSIZE);
#ifdef USE_BINARY_PROTOCOL
vUSBSendBuffer_blocking((unsigned char*)(&(buffer->data[0])), 0, MIN(buffer->count,BUFSIZE)*4, WAIT_TICKS);
if(buffer->count >= BUFSIZE)
vUSBSendBuffer_blocking((unsigned char*)"////", 0, 4, WAIT_TICKS);
else
vUSBSendBuffer_blocking((unsigned char*)"____", 0, 4, WAIT_TICKS);
#elif defined(PRINT_TIMES)
unsigned int i=0;
for(i=0; i<buffer->count; i++) {
DumpUIntToUSB(buffer->data[i]);
DumpStringToUSB(" ");
}
DumpStringToUSB("\n\r");
#else
unsigned int offset = 0;
while(offset < buffer->count) {
int ret = iso14443a_decode_diffmiller(decoder, &rx_frame, buffer->data, &offset, buffer->count);
DumpStringToUSB("\n\r");
if(ret < 0) {
DumpStringToUSB("-");
DumpUIntToUSB(-ret);
} else {
DumpUIntToUSB(ret);
}
DumpStringToUSB(" ");
DumpUIntToUSB(offset); DumpStringToUSB(" "); DumpUIntToUSB(buffer->count); DumpStringToUSB(" "); DumpUIntToUSB(overruns);
DumpStringToUSB("\n\r");
if(ret >= 0) {
DumpStringToUSB("Frame finished, ");
DumpUIntToUSB(rx_frame.numbytes);
DumpStringToUSB(" bytes, ");
DumpUIntToUSB(rx_frame.numbits);
DumpStringToUSB(" bits\n\r");
switch(rx_frame.parameters.a.crc) {
case CRC_OK: DumpStringToUSB("CRC OK\n\r"); break;
case CRC_ERROR: DumpStringToUSB("CRC ERROR\n\r"); break;
case CRC_UNCALCULATED: DumpStringToUSB("CRC UNCALCULATED\n\r"); break;
}
}
}
#endif
buffer->count = 0;
}
}
void start_stop_sniffing(void)
{
if(currently_sniffing)
request_change = REQUEST_STOP;
else
request_change = REQUEST_START;
}
void tc_sniffer (void *pvParameters)
{
(void)pvParameters;
/* Disable load modulation circuitry
* (Must be done explicitly, because the default state is pull-up high, leading
* to a constant modulation output which prevents reception. I've been bitten by
* this more than once.)
*/
load_mod_init();
load_mod_level(0);
clock_switch_init();
pll_init();
pll_inhibit(0);
tc_fdt_init();
memset(fiq_buffers, 0, sizeof(fiq_buffers));
/* Wait for the USB and CMD threads to start up */
vTaskDelay(1000 * portTICK_RATE_MS);
if(OPENPICC->features.clock_switching) {
clock_switch(CLOCK_SELECT_CARRIER);
decoder = iso14443a_init_diffmiller(0);
} else {
switch(OPENPICC->default_clock) {
case CLOCK_SELECT_CARRIER:
decoder = iso14443a_init_diffmiller(0);
break;
case CLOCK_SELECT_PLL:
decoder = iso14443a_init_diffmiller(1);
break;
}
}
if(!decoder) vLedHaltBlinking(1);
// The change interrupt is going to be handled by the FIQ
AT91F_PIO_CfgInput(AT91C_BASE_PIOA, OPENPICC_SSC_DATA);
pio_irq_enable(OPENPICC_SSC_DATA);
int current = 0;
while(1) {
/* Main loop of the sniffer */
if(currently_sniffing) {
int next = (current+1)%(sizeof(fiq_buffers)/sizeof(fiq_buffers[0]));
flush_buffer( &fiq_buffers[next] );
/* The buffer designated by next is now empty, give it to the fiq,
* we'll just guess that this write is atomic */
tc_sniffer_next_buffer_for_fiq = &fiq_buffers[current=next];
if(request_change == REQUEST_STOP) {
currently_sniffing = 0;
request_change = NONE;
tc_sniffer_next_buffer_for_fiq = 0;
memset(fiq_buffers, 0, sizeof(fiq_buffers));
current = 0;
#ifdef USE_BINARY_PROTOCOL
vUSBSendBuffer_blocking((unsigned char *)"----", 0, 4, WAIT_TICKS);
usb_print_set_force_silence(0);
#endif
} else vTaskDelay(2* portTICK_RATE_MS);
} else {
// Do nothing, wait longer
if(request_change == REQUEST_START) {
// Prevent usb_print code from barging in
#ifdef USE_BINARY_PROTOCOL
usb_print_set_force_silence(1);
vUSBSendBuffer_blocking((unsigned char *)"----", 0, 4, WAIT_TICKS);
#endif
currently_sniffing = 1;
request_change = NONE;
} else vTaskDelay(100 * portTICK_RATE_MS);
}
}
}
|
