diff options
| author | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
|---|---|---|
| committer | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
| commit | 044ad7c3987460ede48ff27afd6bdb0ca05a0432 (patch) | |
| tree | 924818cdb0d39ca08aec540d18da7bd406eaae8c /boards/at91cap9-dk/board.h | |
import at91lib from at91lib_20100901_softpack_1_9_v_1_0_svn_v1501120100901_softpack_1_9_v_1_0_svn_v15011
it's sad to see that atmel doesn't publish their svn repo or has
a centralized location or even puts proper version/release info
into the library itself
Diffstat (limited to 'boards/at91cap9-dk/board.h')
| -rw-r--r-- | boards/at91cap9-dk/board.h | 791 |
1 files changed, 791 insertions, 0 deletions
diff --git a/boards/at91cap9-dk/board.h b/boards/at91cap9-dk/board.h new file mode 100644 index 0000000..0500da9 --- /dev/null +++ b/boards/at91cap9-dk/board.h @@ -0,0 +1,791 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+/// \dir
+/// !Purpose
+///
+/// Definition and functions for using AT91CAP9-related features, such
+/// has PIO pins, memories, etc.
+///
+/// !Usage
+/// -# The code for booting the board is provided by board_cstartup.S and
+/// board_lowlevel.c.
+/// -# For using board PIOs, board characteristics (clock, etc.) and external
+/// components, see board.h.
+/// -# For manipulating memories (remapping, SDRAM, etc.), see board_memories.h.
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \unit
+/// !Purpose
+///
+/// Definition of AT91CAP9-DK characteristics, AT91CAP9-dependant PIOs and
+/// external components interfacing.
+///
+/// !Usage
+/// -# For operating frequency information, see "AT91CAP9-DK - Operating frequencies".
+/// -# For using portable PIO definitions, see "AT91CAP9-DK - PIO definitions".
+/// -# Several USB definitions are included here (see "AT91CAP9-DK - USB device").
+/// -# For external components definitions, see "AT91CAP9-DK - External components".
+/// -# For memory-related definitions, see "AT91CAP9-DK - Memories".
+//------------------------------------------------------------------------------
+
+#ifndef BOARD_H
+#define BOARD_H
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#if defined(at91cap9)
+ #include "at91cap9/chip.h"
+ #include "at91cap9/AT91CAP9.h"
+#else
+ #error Board does not support the specified chip.
+#endif
+
+//------------------------------------------------------------------------------
+// Definitions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "AT91CAP9-DK - Board Description"
+/// This page lists several definition related to the board description
+///
+/// !Definitions
+/// - BOARD_NAME
+
+/// Name of the board.
+#define BOARD_NAME "AT91CAP9-DK"
+/// Board definition.
+#define at91cap9dk
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "AT91CAP9-DK - Operating frequencies"
+/// This page lists several definition related to the board operating frequency
+/// (when using the initialization done by board_lowlevel.c).
+///
+/// !Definitions
+/// - BOARD_MAINOSC
+/// - BOARD_MCK
+
+/// Frequency of the board main oscillator.
+#define BOARD_MAINOSC 12000000
+
+/// Master clock frequency (when using board_lowlevel.c).
+#define BOARD_MCK ((12000000 * 50 / 3) / 2)
+
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+// ADC
+//------------------------------------------------------------------------------
+/// ADC clock frequency, at 10-bit resolution (in Hz)
+#define ADC_MAX_CK_10BIT 5000000
+/// Startup time max, return from Idle mode (in µs)
+#define ADC_STARTUP_TIME_MAX 40
+/// Track and hold Acquisition Time min (in ns)
+#define ADC_TRACK_HOLD_TIME_MIN 500
+
+//------------------------------------------------------------------------------
+/// \page "AT91CAP9-DK - USB device"
+///
+/// !Constants
+/// - BOARD_USB_BMATTRIBUTES
+
+/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
+#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
+
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "AT91CAP9-DK - PIO definitions"
+/// This pages lists all the pio definitions contained in board.h. The constants
+/// are named using the following convention: PIN_* for a constant which defines
+/// a single Pin instance (but may include several PIOs sharing the same
+/// controller), and PINS_* for a list of Pin instances.
+///
+/// !DBGU
+/// - PINS_DBGU
+///
+/// !LEDs
+/// - PIN_LED_0
+/// - PIN_LED_1
+/// - PINS_LEDS
+/// - LED_POWER
+/// - LED_DS1
+/// - LED_DS2
+///
+/// !Push buttons
+/// - PIN_KEYBOARD_COL0
+/// - PIN_KEYBOARD_COL1
+/// - PIN_KEYBOARD_COL2
+/// - PIN_KEYBOARD_COL3
+/// - PIN_KEYBOARD_ROW0
+/// - PIN_KEYBOARD_ROW1
+/// - PIN_KEYBOARD_ROW2
+/// - PIN_KEYBOARD_ROW3
+/// - PINS_KEYBOARD_COL
+/// - PINS_KEYBOARD_ROW
+/// - PIN_PUSHBUTTON_1
+/// - PIN_PUSHBUTTON_2
+/// - PIN_PUSHBUTTON_3
+/// - PIN_PUSHBUTTON_4
+/// - PINS_PUSHBUTTONS
+/// - PUSHBUTTON_BP1
+/// - PUSHBUTTON_BP2
+/// - JOYSTICK_LEFT
+/// - JOYSTICK_RIGHT
+/// - JOYSTICK_UP
+/// - JOYSTICK_DOWN
+///
+/// !USART0
+/// - PIN_USART0_RXD
+/// - PIN_USART0_TXD
+/// - PIN_USART0_RTS
+/// - PIN_USART0_CTS
+/// - PIN_USART0_SCK
+///
+/// !USART1
+/// - PIN_USART1_RXD
+/// - PIN_USART1_TXD
+///
+/// !USART2
+/// - PIN_USART2_RXD
+/// - PIN_USART2_TXD
+///
+/// !SPI0
+/// - PIN_SPI0_MISO
+/// - PIN_SPI0_MOSI
+/// - PIN_SPI0_SPCK
+/// - PINS_SPI0
+/// - PIN_SPI0_NPCS0
+///
+/// !AC97
+/// - PINS_AC97
+///
+/// !PWMC
+/// - PIN_PWMC_PWM0
+/// - PIN_PWMC_PWM1
+/// - PIN_PWM_LED0
+/// - PIN_PWM_LED1
+/// - CHANNEL_PWM_LED0
+/// - CHANNEL_PWM_LED1
+///
+/// !ADC
+/// - PIN_ADC_ADC0
+/// - PIN_ADC_ADC1
+/// - PIN_ADC_ADC2
+/// - PIN_ADC_ADC3
+/// - PINS_ADC
+///
+/// !SSC
+/// - PINS_SSC_TX
+///
+/// !USB
+/// - PIN_USB_VBUS
+///
+/// !CAN
+/// - PIN_CAN_TRANSCEIVER_RS
+/// - PIN_CAN1_TRANSCEIVER_TXD
+/// - PIN_CAN1_TRANSCEIVER_RXD
+/// - PIN_CAN2_TRANSCEIVER_TXD
+/// - PIN_CAN2_TRANSCEIVER_RXD
+/// - PINS_CAN_TRANSCEIVER_TXD
+/// - PINS_CAN_TRANSCEIVER_RXD
+
+/// !PCK
+/// - PIN_PCK0
+/// - PIN_PCK1
+/// - PIN_PCK2
+
+/// List of all DBGU pin definitions.
+#define PINS_DBGU {(1<<30)|(1<<31), AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// LED #0 pin definition.
+#define PIN_LED_0 {AT91C_PIO_PA10, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_OUTPUT_0, PIO_DEFAULT}
+/// LED #1 pin definition.
+#define PIN_LED_1 {AT91C_PIO_PA11, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_OUTPUT_0, PIO_DEFAULT}
+/// LED #2 pin definition.
+#define PIN_LED_2 {AT91C_PIO_PC29, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_OUTPUT_0, PIO_DEFAULT}
+/// List of all LEDs definitions.
+#define PINS_LEDS PIN_LED_0, PIN_LED_1, PIN_LED_2
+
+/// Keyboard rows ( scanning output )
+#define PIN_KEYBOARD_ROW0 {1 << 10, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_OUTPUT_0, PIO_DEFAULT}
+#define PIN_KEYBOARD_ROW1 {1 << 11, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_OUTPUT_0, PIO_DEFAULT}
+#define PIN_KEYBOARD_ROW2 {1 << 12, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_OUTPUT_0, PIO_DEFAULT}
+#define PIN_KEYBOARD_ROW3 {1 << 13, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_OUTPUT_0, PIO_DEFAULT}
+
+#define PIN_KEYBOARD_COL0 {1 << 9, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_INPUT, PIO_PULLUP}
+#define PIN_KEYBOARD_COL1 {1 << 8, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_INPUT, PIO_PULLUP}
+#define PIN_KEYBOARD_COL2 {1 << 7, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_INPUT, PIO_PULLUP}
+#define PIN_KEYBOARD_COL3 {1 << 6, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_INPUT, PIO_PULLUP}
+
+#define PINS_KEYBOARD_ROW PIN_KEYBOARD_ROW0, PIN_KEYBOARD_ROW1, PIN_KEYBOARD_ROW2, PIN_KEYBOARD_ROW3
+#define PINS_KEYBOARD_COL PIN_KEYBOARD_COL0, PIN_KEYBOARD_COL1, PIN_KEYBOARD_COL2, PIN_KEYBOARD_COL3
+
+/// Push button #1 pin definition.
+#define PIN_PUSHBUTTON_1 PIN_KEYBOARD_COL0
+/// Push button #2 pin definition.
+#define PIN_PUSHBUTTON_2 PIN_KEYBOARD_COL1
+/// Push button #3 pin definition.
+#define PIN_PUSHBUTTON_3 PIN_KEYBOARD_COL2
+/// Push button #4 pin definition.
+#define PIN_PUSHBUTTON_4 PIN_KEYBOARD_COL3
+/// List of push button pin definitions.
+#define PINS_PUSHBUTTONS PIN_PUSHBUTTON_1, PIN_PUSHBUTTON_2, PIN_PUSHBUTTON_3, PIN_PUSHBUTTON_4
+/// Push button #1 index.
+#define PUSHBUTTON_BP1 0
+/// Push button #2 index.
+#define PUSHBUTTON_BP2 1
+/// Simulated joystick LEFT index.
+#define JOYSTICK_LEFT 0
+/// Simulated joystick RIGHT index.
+#define JOYSTICK_RIGHT 1
+/// Simulated joystick UP index.
+#define JOYSTICK_UP 2
+/// Simulated joystick DOWN index.
+#define JOYSTICK_DOWN 3
+
+/// USART0 TXD pin definition.
+#define PIN_USART0_RXD {1 << 23, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+/// USART0 RXD pin definition.
+#define PIN_USART0_TXD {1 << 22, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+/// USART0 RTS pin definition.
+#define PIN_USART0_RTS {1 << 24, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+/// USART0 CTS pin definition.
+#define PIN_USART0_CTS {1 << 25, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+/// USART0 SCK pin definition.
+#define PIN_USART0_SCK {1 << 26, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// USART1 TXD pin definition.
+#define PIN_USART1_RXD {1 << 1, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+/// USART1 RXD pin definition.
+#define PIN_USART1_TXD {1 << 0, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// USART2 TXD pin definition.
+#define PIN_USART2_RXD {1 << 3, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+/// USART2 RXD pin definition.
+#define PIN_USART2_TXD {1 << 2, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// SPI MISO pin definition.
+#define PIN_SPI0_MISO {AT91C_PA0_SPI0_MISO, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_PULLUP}
+/// SPI MOSI pin definition.
+#define PIN_SPI0_MOSI {AT91C_PA1_SPI0_MOSI, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+/// SPI SPCK pin definition.
+#define PIN_SPI0_SPCK {AT91C_PA2_SPI0_SPCK, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+/// List of SPI pin definitions (MISO, MOSI & SPCK).
+#define PINS_SPI0 PIN_SPI0_MISO, PIN_SPI0_MOSI, PIN_SPI0_SPCK
+/// SPI chip select 0 pin definition.
+#define PIN_SPI0_NPCS0 {AT91C_PA5_SPI0_NPCS0, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+/// SPI chip select 1 pin definition.
+#define PIN_SPI0_NPCS1 {AT91C_PA3_SPI0_NPCS1, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+/// SPI chip select 2 pin definition.
+#define PIN_SPI0_NPCS2 {AT91C_PA4_SPI0_NPCS2A, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+/// SPI chip select 3 pin definition.
+#define PIN_SPI0_NPCS3 {AT91C_PD1_SPI0_NPCS3D, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+
+/// AC97 pins definition.
+#define PINS_AC97 {0x000003C0, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// PWMC PWM1 pin definition.
+#define PIN_PWMC_PWM1 {1 << 10, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+/// PWMC PWM2 pin definition.
+#define PIN_PWMC_PWM3 {1 << 11, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+/// PWM pin definition for LED0
+#define PIN_PWM_LED0 PIN_PWMC_PWM1
+/// PWM pin definition for LED1
+#define PIN_PWM_LED1 PIN_PWMC_PWM3
+/// PWM channel for LED0
+#define CHANNEL_PWM_LED0 1
+/// PWM channel for LED1
+#define CHANNEL_PWM_LED1 3
+
+/// ADC_AD0 pin definition.
+#define PIN_ADC_ADC0 {AT91C_PB13_AD0, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
+/// ADC_AD1 pin definition.
+#define PIN_ADC_ADC1 {AT91C_PB14_AD1, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
+/// ADC_AD2 pin definition.
+#define PIN_ADC_ADC2 {AT91C_PB15_AD2, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
+/// ADC_AD3 pin definition.
+#define PIN_ADC_ADC3 {AT91C_PB16_AD3, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
+/// ADC_AD0 pin definition.
+#define PIN_ADC_ADC4 {AT91C_PB17_AD4, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
+/// ADC_AD1 pin definition.
+#define PIN_ADC_ADC5 {AT91C_PB18_AD5, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
+/// ADC_AD2 pin definition.
+#define PIN_ADC_ADC6 {AT91C_PB19_AD6, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
+/// ADC_AD3 pin definition.
+#define PIN_ADC_ADC7 {AT91C_PB20_AD7, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
+/// Pins ADC
+#define PINS_ADC PIN_ADC_ADC0, PIN_ADC_ADC1, PIN_ADC_ADC2, PIN_ADC_ADC3
+
+/// SSC transmitter pins definition.
+#define PINS_SSC_TX { (1 << 0) | (1 << 1) | (1 << 2), \
+ AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// USB VBus monitoring pin definition.
+#define PIN_USB_VBUS {1 << 31, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
+
+/// CAN Definition
+/// RS: Select input for high speed mode or silent mode
+#define PIN_CAN_TRANSCEIVER_RS {1<<12, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_OUTPUT_1, PIO_DEFAULT}
+
+/// TXD: Transmit data input
+#define PIN_CAN1_TRANSCEIVER_TXD {1<<12, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+/// RXD: Receive data output
+#define PIN_CAN1_TRANSCEIVER_RXD {1<<13, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+/// TXD pins
+#define PINS_CAN_TRANSCEIVER_TXD PIN_CAN1_TRANSCEIVER_TXD
+/// RXD pins
+#define PINS_CAN_TRANSCEIVER_RXD PIN_CAN1_TRANSCEIVER_RXD
+
+// PCK pins
+#define PIN_PCK0 {1 << 12, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+#define PIN_PCK1 {1 << 27, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+#define PIN_PCK1bis {1 << 10, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+#define PIN_PCK2 {1 << 15, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "AT91CAP9-DK - External components"
+/// This page lists the definitions related to external on-board components
+/// located in the board.h file for the AT91CAP9-DK.
+///
+/// !AT45 Dataflash
+/// - BOARD_AT45_A_SPI_BASE
+/// - BOARD_AT45_A_SPI_ID
+/// - BOARD_AT45_A_SPI_PINS
+/// - BOARD_AT45_A_SPI
+/// - BOARD_AT45_A_NPCS
+/// - BOARD_AT45_A_NPCS_PIN
+///
+/// !AT26 Serial Flash
+/// - BOARD_AT26_A_SPI_BASE
+/// - BOARD_AT26_A_SPI_ID
+/// - BOARD_AT26_A_SPI_PINS
+/// - BOARD_AT26_A_SPI
+/// - BOARD_AT26_A_NPCS
+/// - BOARD_AT26_A_NPCS_PIN
+///
+/// !LCD
+/// - PINS_LCD
+/// - BOARD_LCD_WIDTH
+/// - BOARD_LCD_HEIGHT
+/// - BOARD_LCD_BPP
+/// - BOARD_LCD_IFWIDTH
+/// - BOARD_LCD_FRAMESIZE_PIXELS
+/// - BOARD_LCD_FRAMESIZE
+/// - BOARD_LCD_FRAMERATE
+/// - BOARD_LCD_PIXELCLOCK
+/// - BOARD_LCD_DISPLAYTYPE
+/// - BOARD_LCD_POLARITY_INVVD
+/// - BOARD_LCD_POLARITY_INVFRAME
+/// - BOARD_LCD_POLARITY_INVLINE
+/// - BOARD_LCD_POLARITY_INVCLK
+/// - BOARD_LCD_POLARITY_INVDVAL
+/// - BOARD_LCD_CLOCKMODE
+/// - BOARD_LCD_TIMING_VFP
+/// - BOARD_LCD_TIMING_VBP
+/// - BOARD_LCD_TIMING_VPW
+/// - BOARD_LCD_TIMING_VHDLY
+/// - BOARD_LCD_TIMING_HFP
+/// - BOARD_LCD_TIMING_HBP
+/// - BOARD_LCD_TIMING_HPW
+///
+/// !TouchScreen
+/// - BOARD_TSC_ADS7843
+/// - PIN_TCS_IRQ
+/// - PIN_TCS_BUSY
+/// - BOARD_TSC_SPI_BASE
+/// - BOARD_TSC_SPI_ID
+/// - BOARD_TSC_SPI_PINS
+/// - BOARD_TSC_NPCS
+/// - BOARD_TSC_NPCS_PIN
+///
+/// !SD Card (MCI0)
+/// - BOARD_SD_MCI_BASE
+/// - BOARD_SD_MCI_ID
+/// - BOARD_SD_PINS
+/// - BOARD_SD_PIN_CD
+/// - BOARD_SD_SLOT
+///
+/// !SD Card (MCI1)
+/// - BOARD_SD_MCI1_BASE
+/// - BOARD_SD_MCI1_ID
+/// - BOARD_SD_MCI1_PINS
+/// - BOARD_SD_MCI1_PIN_CD
+/// - BOARD_SD_BOOT_MCISLOT
+///
+/// !SD Card SPI
+/// - BOARD_SD_SPI_BASE
+/// - BOARD_SD_SPI_ID
+/// - BOARD_SD_SPI_PINS
+/// - BOARD_SD_NPCS
+///
+/// !EMAC
+/// - BOARD_EMAC_PHY_ADDR
+/// - BOARD_EMAC_PHY_COMP_DM9161
+/// - BOARD_EMAC_POWER_ALWAYS_ON
+/// - BOARD_EMAC_MODE_RMII
+/// - BOARD_EMAC_PINS
+/// - BOARD_EMAC_PIN_RXDV
+/// - BOARD_EMAC_PIN_COL
+/// - BOARD_EMAC_RST_PINS
+///
+/// !UDA1342
+/// - BOARD_UDA1342_TWI_BASE
+/// - BOARD_UDA1342_TWI_ID
+/// - BOARD_UDA1342_TWI_PINS
+/// - BOARD_UDA1342_SSC_BASE
+/// - BOARD_UDA1342_SSC_ID
+/// - BOARD_UDA1342_SSC_PINS
+/// - BOARD_UDA1342_MCK_PIN
+/// - BOARD_UDA1342_SLAVE_ADDR
+///
+/// !ISI
+/// - BOARD_ISI_PIO_CNTRL1
+/// - BOARD_ISI_PIO_CNTRL2
+/// - BOARD_ISI_TWCK
+/// - BOARD_ISI_TWD
+/// - BOARD_ISI_MCK
+/// - BOARD_ISI_VSYNC
+/// - BOARD_ISI_HSYNC
+/// - BOARD_ISI_PCK
+/// - BOARD_ISI_PINS_DATA
+///
+/// !AT98SC
+/// - BOARD_AT98SC_SPI_BASE
+/// - BOARD_AT98SC_SPI_ID
+/// - BOARD_AT98SC_SPI_PINS
+/// - BOARD_AT98SC_NPCS
+/// - BOARD_AT98SC_NPCS_PIN
+
+/// Base address of SPI peripheral connected to the dataflash.
+#define BOARD_AT45_A_SPI_BASE AT91C_BASE_SPI0
+/// Identifier of SPI peripheral connected to the dataflash.
+#define BOARD_AT45_A_SPI_ID AT91C_ID_SPI0
+/// Pins of the SPI peripheral connected to the dataflash.
+#define BOARD_AT45_A_SPI_PINS PINS_SPI0
+/// Dataflahs SPI number.
+#define BOARD_AT45_A_SPI 0
+/// Chip select connected to the dataflash.
+#define BOARD_AT45_A_NPCS 0
+/// Chip select pin connected to the dataflash.
+#define BOARD_AT45_A_NPCS_PIN PIN_SPI0_NPCS0
+
+/// Base address of SPI peripheral connected to the serialflash.
+#define BOARD_AT26_A_SPI_BASE AT91C_BASE_SPI0
+/// Identifier of SPI peripheral connected to the serialflash.
+#define BOARD_AT26_A_SPI_ID AT91C_ID_SPI0
+/// Pins of the SPI peripheral connected to the serialflash.
+#define BOARD_AT26_A_SPI_PINS PINS_SPI0
+/// Serialflash SPI number.
+#define BOARD_AT26_A_SPI 0
+/// Chip select connected to the serialflash.
+#define BOARD_AT26_A_NPCS 0
+/// Chip select pin connected to the serialflash.
+#define BOARD_AT26_A_NPCS_PIN PIN_SPI0_NPCS0
+
+/// LCD pin list.
+#define PINS_LCD \
+ {0x00000200, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}, \
+ {0x0FCFCFCE, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// Display width in pixels.
+#define BOARD_LCD_WIDTH 240
+/// Display height in pixels.
+#define BOARD_LCD_HEIGHT 320
+/// Display resolution in bits per pixel (bpp).
+#define BOARD_LCD_BPP AT91C_LCDC_PIXELSIZE_TWENTYFOURBITSPERPIXEL
+/// Display interface width in bits.
+#define BOARD_LCD_IFWIDTH 24
+/// Frame size in pixels (height * width * bpp).
+#define BOARD_LCD_FRAMESIZE_PIXELS (BOARD_LCD_WIDTH * BOARD_LCD_HEIGHT * 24)
+/// Frame size in words (height * width * bpp / 32)
+#define BOARD_LCD_FRAMESIZE (BOARD_LCD_FRAMESIZE_PIXELS / 32)
+/// Frame rate in Hz.
+#define BOARD_LCD_FRAMERATE 60
+/// Pixel clock rate in Hz (frameSize * frameRate / interfaceWidth).
+#define BOARD_LCD_PIXELCLOCK (BOARD_LCD_FRAMESIZE_PIXELS * BOARD_LCD_FRAMERATE / BOARD_LCD_IFWIDTH)
+/// LCD display type.
+#define BOARD_LCD_DISPLAYTYPE AT91C_LCDC_DISTYPE_TFT
+/// LCDC polarity.
+#define BOARD_LCD_POLARITY_INVVD AT91C_LCDC_INVVD_NORMALPOL
+/// LCDVSYNC polarity.
+#define BOARD_LCD_POLARITY_INVFRAME AT91C_LCDC_INVFRAME_NORMALPOL
+/// LCDHSYNC polarity.
+#define BOARD_LCD_POLARITY_INVLINE AT91C_LCDC_INVLINE_NORMALPOL
+/// LCDDOTCLK polarity.
+#define BOARD_LCD_POLARITY_INVCLK AT91C_LCDC_INVCLK_NORMALPOL
+/// LCDDEN polarity.
+#define BOARD_LCD_POLARITY_INVDVAL AT91C_LCDC_INVDVAL_NORMALPOL
+/// Pixel clock mode.
+#define BOARD_LCD_CLOCKMODE AT91C_LCDC_CLKMOD_ALWAYSACTIVE
+/// Vertical front porch in number of lines.
+#define BOARD_LCD_TIMING_VFP 2
+/// Vertical back porch in number of lines.
+#define BOARD_LCD_TIMING_VBP 4
+/// Vertical pulse width in LCDDOTCLK cycles.
+#define BOARD_LCD_TIMING_VPW 1
+/// Number of cycles between VSYNC edge and HSYNC rising edge.
+#define BOARD_LCD_TIMING_VHDLY 1
+/// Horizontal front porch in LCDDOTCLK cycles.
+#define BOARD_LCD_TIMING_HFP 11
+/// Horizontal back porch in LCDDOTCLK cycles.
+#define BOARD_LCD_TIMING_HBP 17
+/// Horizontal pulse width in LCDDOTCLK cycles.
+#define BOARD_LCD_TIMING_HPW 5
+
+/// Indicates board has an ADS7843 external component to manage Touch Screen
+#define BOARD_TSC_ADS7843
+
+/// Touchscreen controller IRQ pin definition.
+#define PIN_TCS_IRQ {AT91C_PIO_PC4, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_INPUT, PIO_PULLUP}
+/// Touchscreen controller Busy pin definition.
+#define PIN_TCS_BUSY {AT91C_PIO_PC5, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
+
+/// Base address of SPI peripheral connected to the touchscreen controller.
+#define BOARD_TSC_SPI_BASE AT91C_BASE_SPI0
+/// Identifier of SPI peripheral connected to the touchscreen controller.
+#define BOARD_TSC_SPI_ID AT91C_ID_SPI0
+/// Pins of the SPI peripheral connected to the touchscreen controller.
+#define BOARD_TSC_SPI_PINS PINS_SPI0
+/// Chip select connected to the touchscreen controller.
+#define BOARD_TSC_NPCS 3
+/// Chip select pin connected to the touchscreen controller.
+#define BOARD_TSC_NPCS_PIN PIN_SPI0_NPCS3
+
+/// Base address of the MCI peripheral connected to the SD card.
+#define BOARD_SD_MCI_BASE AT91C_BASE_MCI0
+/// Peripheral identifier of the MCI connected to the SD card.
+#define BOARD_SD_MCI_ID AT91C_ID_MCI0
+/// MCI pins that shall be configured to access the SD card.
+#define BOARD_SD_PINS PINS_MCI
+/// MCI slot to which the SD card is connected to.
+#define BOARD_SD_SLOT MCI_SD_SLOTA
+/// SD card detection pin definition.
+#define BOARD_SD_PIN_CD {AT91C_PIO_PC20, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_INPUT, PIO_PULLUP}
+/// SD boot slot
+#define BOARD_SD_BOOT_MCISLOT 0
+
+/// List of MCI pins definitions.
+#define PINS_MCI {0x0000003F, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// Base address of the MCI peripheral connected to the SD card.
+#define BOARD_SD_MCI1_BASE AT91C_BASE_MCI1
+/// Peripheral identifier of the MCI connected to the SD card.
+#define BOARD_SD_MCI1_ID AT91C_ID_MCI1
+/// MCI pins that shall be configured to access the SD card.
+#define BOARD_SD_MCI1_PINS PINS_MCI1
+/// Second MCI slot to which the SD card is connected to.
+#define BOARD_SD_MCI1_SLOT MCI_SD_SLOTA
+/// SD card detection pin definition.
+#define BOARD_SD_MCI1_PIN_CD {AT91C_PIO_PC21, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_INPUT, PIO_PULLUP}
+
+/// List of MCI pins definitions.
+#define PINS_MCI1 {0x003F0000, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// Base address of the SPI peripheral connected to the SD card.
+#define BOARD_SD_SPI_BASE AT91C_BASE_SPI0
+/// Identifier of the SPI peripheral connected to the SD card.
+#define BOARD_SD_SPI_ID AT91C_ID_SPI0
+/// List of pins to configure to access the SD card
+#define BOARD_SD_SPI_PINS PINS_SPI0, PIN_SPI0_NPCS0
+/// NPCS number
+#define BOARD_SD_NPCS 0
+
+/// TWI0 pins definition.
+#define PINS_TWI {(1<<4) | (1<<5), AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+
+
+/// PHY address
+#define BOARD_EMAC_PHY_ADDR 0
+/// PHY Component
+#define BOARD_EMAC_PHY_COMP_DM9161 1
+/// Board EMAC power control - ALWAYS ON
+#define BOARD_EMAC_POWER_ALWAYS_ON
+/// Board EMAC work mode - RMII/MII ( 1 / 0 )
+#define BOARD_EMAC_MODE_RMII 1
+
+/// The PIN list of PIO for EMAC
+#define BOARD_EMAC_PINS {0x7FE00000, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}, \
+ {0x0FF00000, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+#define BOARD_EMAC_PIN_RXDV {(1<<22), AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+#define BOARD_EMAC_PIN_COL {(1<<26), AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// The PIN Configure list for EMAC on power up reset (MII)
+#define BOARD_EMAC_RST_PINS BOARD_EMAC_PIN_RXDV, BOARD_EMAC_PIN_COL
+/// The runtime pin configure list for EMAC
+#define BOARD_EMAC_RUN_PINS BOARD_EMAC_PINS
+
+/// UDA1342
+#define BOARD_UDA1342_TWI_BASE AT91C_BASE_TWI
+#define BOARD_UDA1342_TWI_ID AT91C_ID_TWI
+#define BOARD_UDA1342_TWI_PINS PINS_TWI
+#define BOARD_UDA1342_SSC_BASE AT91C_BASE_SSC0
+#define BOARD_UDA1342_SSC_ID AT91C_ID_SSC0
+#define BOARD_UDA1342_SSC_PINS PINS_SSC_TX
+#define BOARD_UDA1342_MCK_PIN PIN_PCK1bis
+#define BOARD_UDA1342_SLAVE_ADDR 0x1A
+
+/// ISI
+#define BOARD_CAPTOR_OV9650
+#define BOARD_ISI_PIO_CTRL1 {(1<<14), AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_OUTPUT_0, PIO_DEFAULT}
+#define BOARD_ISI_PIO_CTRL2 {(1<<15), AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_OUTPUT_0, PIO_DEFAULT}
+#define BOARD_ISI_TWCK {(1<<5), AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+#define BOARD_ISI_TWD {(1<<4), AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+// PCK1 use instead of ISI_MCK
+#define BOARD_ISI_MCK {(1<<27), AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+#define BOARD_ISI_VSYNC {(1<<26), AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+#define BOARD_ISI_HSYNC {(1<<25), AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+#define BOARD_ISI_PCK {(1<<24), AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+#define BOARD_ISI_PINS_DATA {(1<<16)|(1<<17)|(1<<18)|(1<<19)|(1<<20)|(1<<21)|(1<<22)|\
+ (1<<23)|(1<<28)|(1<<29)|(1<<30)|(1<<31),\
+ AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
+
+/// Base address of SPI peripheral connected to the AT98 secure chip.
+#define BOARD_AT98SC_SPI_BASE AT91C_BASE_SPI0
+/// Identifier of SPI peripheral connected to the AT98 secure chip.
+#define BOARD_AT98SC_SPI_ID AT91C_ID_SPI0
+/// Pins of the SPI peripheral connected to the AT98 secure chip.
+#define BOARD_AT98SC_SPI_PINS PINS_SPI0
+/// Chip select connected to the AT98 secure chip.
+#define BOARD_AT98SC_NPCS 0
+/// Chip select pin connected to the AT98 secure chip.
+#define BOARD_AT98SC_NPCS_PIN PIN_SPI0_NPCS0
+
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "AT91CAP9-DK - Memories"
+/// This page lists definitions related to external on-board memories.
+///
+/// !SDRAM
+/// - BOARD_SDRAM_SIZE
+/// - PINS_SDRAM
+/// - BOARD_SDRAM_BUSWIDTH
+///
+/// !DDRAM
+/// - BOARD_DDRAM_SIZE
+/// - BOARD_DDRAM_BUSWIDTH
+///
+/// !BCRAM
+/// - BOARD_BCRAM_SIZE
+/// - BOARD_BCRAM_BUSWIDTH
+///
+/// !Nandflash
+/// - PINS_NANDFLASH
+/// - BOARD_NF_CE_PIN
+/// - BOARD_NF_RB_PIN
+/// - BOARD_NF_COMMAND_ADDR
+/// - BOARD_NF_ADDRESS_ADDR
+/// - BOARD_NF_DATA_ADDR
+///
+/// !NorFlash
+/// - BOARD_NORFLASH_ADDR
+/// - BOARD_NORFLASH_DFT_BUS_SIZE
+
+/// Board SDRAM size
+#define BOARD_SDRAM_SIZE (64*1024*1024) // with AT91CAP-MEM33 extension
+/// List of all SDRAM pins definitions.
+#define PINS_SDRAM {0xFFFF0000, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
+/// SDRAM bus width.
+#define BOARD_SDRAM_BUSWIDTH 32
+
+/// Board DDRAM size
+#define BOARD_DDRAM_SIZE (32*1024*1024) // with AT91CAP-MEM18 extension
+/// DDRAM bus width.
+#define BOARD_DDRAM_BUSWIDTH 16
+
+/// Board BCRAM size
+#define BOARD_BCRAM_SIZE (16*1024*1024) // with AT91CAP-MEM18 extension
+/// BCRAM bus width.
+#define BOARD_BCRAM_BUSWIDTH 16
+
+/// Nandflash controller peripheral pins definition.
+#define PINS_NANDFLASH BOARD_NF_CE_PIN
+/// Nandflash output enable pin definition.
+//#define PIN_NF_OE // => dedicated pin
+/// Nandflash write enable pin definition
+//#define PIN_NF_WE // => dedicated pin
+/// Nandflash chip enable pin definition.
+#define BOARD_NF_CE_PIN {1 << 15, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_OUTPUT_1, PIO_DEFAULT}
+/// Nandflash ready/busy pin definition.
+#define BOARD_NF_RB_PIN { 0, 0, 0, 0, 0}// Not used on the DK board. Use Read Status Register Command
+/// Address for transferring command bytes to the nandflash.
+#define BOARD_NF_COMMAND_ADDR 0x40400000
+/// Address for transferring address bytes to the nandflash.
+#define BOARD_NF_ADDRESS_ADDR 0x40200000
+/// Address for transferring data bytes to the nandflash.
+#define BOARD_NF_DATA_ADDR 0x40000000
+
+/// Address for transferring command bytes to the norflash.
+#define BOARD_NORFLASH_ADDR 0x10000000
+/// Dafult Nor bus size after power reser
+#define BOARD_NORFLASH_DFT_BUS_SIZE 16
+
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+// Library naming workaround
+//------------------------------------------------------------------------------
+
+/// Source type definition
+#define AIC_SRCTYPE AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL
+
+#define AT91C_EBI_DDRAM (AT91_CAST(char *) 0x70000000) // DDRAM on EBI Chip Select 6 base address
+#define AT91C_EBI_DDRAM_SIZE (16*1024*1024) // DDRAM on EBI Chip Select 6 size in byte (262144 Kbytes)
+
+//------------------------------------------------------------------------------
+/// \page "AT91CAP9-DK - Individual chip definition"
+/// This page lists the definitions related to different chip's definition
+/// located in the board.h file for the AT91CAP9-DK
+
+/// Twi define
+#define BOARD_ID_TWI_EEPROM AT91C_ID_TWI
+#define BOARD_BASE_TWI_EEPROM AT91C_BASE_TWI
+#define BOARD_PINS_TWI_EEPROM PINS_TWI
+
+/// USART
+#define BOARD_PIN_USART_RXD PIN_USART0_RXD
+#define BOARD_PIN_USART_TXD PIN_USART0_TXD
+#define BOARD_PIN_USART_CTS PIN_USART0_CTS
+#define BOARD_PIN_USART_RTS PIN_USART0_RTS
+#define BOARD_USART_BASE AT91C_BASE_US0
+#define BOARD_ID_USART AT91C_ID_US0
+//------------------------------------------------------------------------------
+
+
+#endif //#ifndef BOARD_H
+
|