diff options
| author | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
|---|---|---|
| committer | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
| commit | 044ad7c3987460ede48ff27afd6bdb0ca05a0432 (patch) | |
| tree | 924818cdb0d39ca08aec540d18da7bd406eaae8c /boards/at91sam9m11-ek/board.h | |
import at91lib from at91lib_20100901_softpack_1_9_v_1_0_svn_v1501120100901_softpack_1_9_v_1_0_svn_v15011
it's sad to see that atmel doesn't publish their svn repo or has
a centralized location or even puts proper version/release info
into the library itself
Diffstat (limited to 'boards/at91sam9m11-ek/board.h')
| -rw-r--r-- | boards/at91sam9m11-ek/board.h | 623 |
1 files changed, 623 insertions, 0 deletions
diff --git a/boards/at91sam9m11-ek/board.h b/boards/at91sam9m11-ek/board.h new file mode 100644 index 0000000..84cf08a --- /dev/null +++ b/boards/at91sam9m11-ek/board.h @@ -0,0 +1,623 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+/// \dir
+/// !Purpose
+///
+/// Definition and functions for using AT91SAM9M11-related features, such
+/// has PIO pins, memories, etc.
+///
+/// !Usage
+/// -# The code for booting the board is provided by board_cstartup.S and
+/// board_lowlevel.c.
+/// -# For using board PIOs, board characteristics (clock, etc.) and external
+/// components, see board.h.
+/// -# For manipulating memories (remapping, SDRAM, etc.), see board_memories.h.
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \unit
+/// !Purpose
+///
+/// Definition of AT91SAM9M11-EK characteristics, AT91SAM9M11-dependant PIOs and
+/// external components interfacing.
+///
+/// !Usage
+/// -# For operating frequency information, see "SAM9M11-EK - Operating frequencies".
+/// -# For using portable PIO definitions, see "SAM9M11-EK - PIO definitions".
+/// -# Several USB definitions are included here (see "SAM9M11-EK - USB device").
+/// -# For external components definitions, see "SAM79260-EK - External components".
+/// -# For memory-related definitions, see "SAM79260-EK - Memories".
+//------------------------------------------------------------------------------
+
+#ifndef BOARD_H
+#define BOARD_H
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#if defined(at91sam9m11)
+ #include "at91sam9m11/chip.h"
+ #include "at91sam9m11/AT91SAM9M11.h"
+#else
+ #error Board does not support the specified chip.
+#endif
+
+//------------------------------------------------------------------------------
+// Definitions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "SAM9M11-EK - Board Description"
+/// This page lists several definition related to the board description.
+///
+/// !Definitions
+/// - BOARD_NAME
+
+/// Name of the board.
+#define BOARD_NAME "AT91SAM9M11-EK"
+/// Board definition.
+#define at91sam9m11ek
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "SAM9M11-EK - Operating frequencies"
+/// This page lists several definition related to the board operating frequency
+/// (when using the initialization done by board_lowlevel.c).
+///
+/// !Definitions
+/// - BOARD_MAINOSC
+/// - BOARD_MCK
+
+/// Frequency of the board main oscillator.
+#define BOARD_MAINOSC 12000000
+
+/// Master clock frequency (when using board_lowlevel.c).
+// ((12MHz / DIVA / PLLADIV2 / MDIV) * (MULA+1)
+#define BOARD_MCK ((unsigned long)((BOARD_MAINOSC / 3 / 2 / 3) * 200 )) // 133MHz
+//#define BOARD_MCK ((unsigned long)((BOARD_MAINOSC / 3 / 2 / 4) * 200 )) // 100MHz
+
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "SAM9RL-EK - USB device"
+///
+/// !Constants
+/// - BOARD_USB_BMATTRIBUTES
+
+/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
+//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_RWAKEUP
+#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "SAM9M11-EK - PIO definitions"
+/// This pages lists all the pio definitions contained in board.h. The constants
+/// are named using the following convention: PIN_* for a constant which defines
+/// a single Pin instance (but may include several PIOs sharing the same
+/// controller), and PINS_* for a list of Pin instances.
+///
+/// !DBGU
+/// - PINS_DBGU
+///
+/// !LEDs
+/// - PIN_LED_0
+/// - PIN_LED_1
+/// - PINS_LEDS
+/// - LED_POWER
+/// - LED_DS1
+///
+/// !Push buttons
+/// - PIN_PUSHBUTTON_1
+/// - PIN_PUSHBUTTON_2
+/// - PINS_PUSHBUTTONS
+/// - PUSHBUTTON_BP1
+/// - PUSHBUTTON_BP2
+/// - JOYSTICK_LEFT
+/// - JOYSTICK_RIGHT
+///
+/// !USART0
+/// - PIN_USART0_RXD
+/// - PIN_USART0_TXD
+///
+/// !SPI0
+/// - PIN_SPI0_MISO
+/// - PIN_SPI0_MOSI
+/// - PIN_SPI0_SPCK
+/// - PINS_SPI0
+/// - PIN_SPI0_NPCS0
+/// - PIN_SPI0_NPCS1
+///
+/// !SSC
+/// - PINS_SSC_TX
+///
+/// !USB
+/// - PIN_USB_VBUS
+///
+/// !MCI
+/// - PINS_MCI
+///
+/// !TWI
+/// - PINS_TWI0
+///
+/// !TSADC
+/// - PINS_TSADCC
+
+/// List of all DBGU pin definitions.
+#define PINS_DBGU {(1<<12) | (1<<13), AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// LED #0 pin definition.
+#define PIN_LED_0 {1 << 0, AT91C_BASE_PIOD, AT91C_ID_PIOD_E, PIO_OUTPUT_1, PIO_DEFAULT}
+/// LED #1 pin definition.
+#define PIN_LED_1 {1 << 31, AT91C_BASE_PIOD, AT91C_ID_PIOD_E, PIO_OUTPUT_1, PIO_DEFAULT}
+/// List of all LED definitions.
+#define PINS_LEDS PIN_LED_0, PIN_LED_1
+/// Power LED index.
+#define LED_POWER 0
+/// DS1 LED index.
+#define LED_DS1 1
+
+/// Push button #1 pin definition.
+#define PIN_PUSHBUTTON_1 {1 << 30, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_INPUT, PIO_PULLUP}
+/// Pusb button #2 pin definition.
+#define PIN_PUSHBUTTON_2 {1 << 31, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_INPUT, PIO_PULLUP}
+/// List of all pushbutton pin definitions.
+#define PINS_PUSHBUTTONS PIN_PUSHBUTTON_1, PIN_PUSHBUTTON_2
+/// Push button #1 index.
+#define PUSHBUTTON_BP1 0
+/// Push button #2 index.
+#define PUSHBUTTON_BP2 1
+/// Simulated joystick LEFT index.
+#define JOYSTICK_LEFT 0
+/// Simulated joystick RIGHT index.
+#define JOYSTICK_RIGHT 1
+
+/// USART0 TXD pin definition.
+#define PIN_USART0_TXD {1 << 19, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
+/// USART0 RXD pin definition.
+#define PIN_USART0_RXD {1 << 18, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
+/// USART0 RTS pin definition.
+#define PIN_USART0_RTS {1 << 17, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_B, PIO_DEFAULT}
+/// USART0 CTS pin definition.
+#define PIN_USART0_CTS {1 << 15, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_B, PIO_DEFAULT}
+/// USART0 SCK pin definition.
+#define PIN_USART0_SCK {1 << 16, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+
+/// SPI0 MISO pin definition.
+#define PIN_SPI0_MISO {1 << 0, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_PULLUP}
+/// SPI0 MOSI pin definition.
+#define PIN_SPI0_MOSI {1 << 1, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
+/// SPI0 SPCK pin definition.
+#define PIN_SPI0_SPCK {1 << 2, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
+/// List of SPI0 pin definitions (MISO, MOSI & SPCK).
+#define PINS_SPI0 PIN_SPI0_MISO, PIN_SPI0_MOSI, PIN_SPI0_SPCK
+/// SPI0 chip select 0 pin definition.
+#define PIN_SPI0_NPCS0 {1 << 3, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// SSC transmitter pins definition.
+#define PINS_SSC_TX { (1 << 0) | (1 << 1) | (1 << 2), \
+ AT91C_BASE_PIOD, AT91C_ID_PIOD_E, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// USB VBus monitoring pin definition.
+#define PIN_USB_VBUS {1 << 19, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_INPUT, PIO_DEFAULT}
+
+/// List of MCI pins definitions.
+#define PINS_MCI0 \
+ {(0x3E << 0), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_PULLUP}, \
+ {(0x1 << 0), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define PINS_MCI1 \
+ {(0x1F << 22), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_PULLUP}, \
+ {(0x1 << 31), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define PINS_MCI0_CD \
+ {AT91C_PIO_PD10, AT91C_BASE_PIOD, AT91C_ID_PIOD_E, PIO_INPUT, PIO_PULLUP}
+#define PINS_MCI1_CD \
+ {AT91C_PIO_PD11, AT91C_BASE_PIOD, AT91C_ID_PIOD_E, PIO_INPUT, PIO_PULLUP}
+#define PINS_MCI1_WP \
+ {AT91C_PIO_PD29, AT91C_BASE_PIOD, AT91C_ID_PIOD_E, PIO_INPUT, PIO_PULLUP}
+
+/*
+#define PINS_MCI \
+ {0x0000003B, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_B, PIO_PULLUP}, \
+ {1 << 8, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+*/
+/// TWI version 3xx
+#define TWI_V3XX
+/// TWI pins definition.
+#define PINS_TWI0 {(1<<20) | (1<<21), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// TSADCC pins definition.
+#define PINS_TSADCC {(1 << 20)|(1 << 21)|(1 << 22)|(1 << 23),\
+ AT91C_BASE_PIOD, AT91C_ID_PIOD_E, PIO_PERIPH_B, PIO_DEFAULT}
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "SAM9M11-EK - External components"
+/// This page lists the definitions related to external on-board components
+/// located in the board.h file for the AT91SAM9M11-EK.
+///
+/// !AT45 Dataflash Card (A)
+/// - BOARD_AT45_A_SPI_BASE
+/// - BOARD_AT45_A_SPI_ID
+/// - BOARD_AT45_A_SPI_PINS
+/// - BOARD_AT45_A_SPI
+/// - BOARD_AT45_A_NPCS
+/// - BOARD_AT45_A_NPCS_PIN
+///
+/// !AT45 Dataflash (B)
+/// - BOARD_AT45_B_SPI_BASE
+/// - BOARD_AT45_B_SPI_ID
+/// - BOARD_AT45_B_SPI_PINS
+/// - BOARD_AT45_B_SPI
+/// - BOARD_AT45_B_NPCS
+/// - BOARD_AT45_B_NPCS_PIN
+///
+/// !LCD
+/// - PINS_LCD
+/// - BOARD_LCD_WIDTH
+/// - BOARD_LCD_HEIGHT
+/// - BOARD_LCD_BPP
+/// - BOARD_LCD_IFWIDTH
+/// - BOARD_LCD_FRAMESIZE_PIXELS
+/// - BOARD_LCD_FRAMESIZE
+/// - BOARD_LCD_FRAMERATE
+/// - BOARD_LCD_PIXELCLOCK
+/// - BOARD_LCD_DISPLAYTYPE
+/// - BOARD_LCD_POLARITY_INVVD
+/// - BOARD_LCD_POLARITY_INVFRAME
+/// - BOARD_LCD_POLARITY_INVLINE
+/// - BOARD_LCD_POLARITY_INVCLK
+/// - BOARD_LCD_POLARITY_INVDVAL
+/// - BOARD_LCD_CLOCKMODE
+/// - BOARD_LCD_TIMING_VFP
+/// - BOARD_LCD_TIMING_VBP
+/// - BOARD_LCD_TIMING_VPW
+/// - BOARD_LCD_TIMING_VHDLY
+/// - BOARD_LCD_TIMING_HFP
+/// - BOARD_LCD_TIMING_HBP
+/// - BOARD_LCD_TIMING_HPW
+///
+/// !LCD
+/// - PINS_LCD
+/// - BOARD_LCD_WIDTH
+/// - BOARD_LCD_HEIGHT
+/// - BOARD_LCD_BPP
+/// - BOARD_LCD_IFWIDTH
+/// - BOARD_LCD_FRAMESIZE_PIXELS
+/// - BOARD_LCD_FRAMESIZE
+/// - BOARD_LCD_FRAMERATE
+/// - BOARD_LCD_PIXELCLOCK
+/// - BOARD_LCD_DISPLAYTYPE
+/// - BOARD_LCD_POLARITY_INVVD
+/// - BOARD_LCD_POLARITY_INVFRAME
+/// - BOARD_LCD_POLARITY_INVLINE
+/// - BOARD_LCD_POLARITY_INVCLK
+/// - BOARD_LCD_POLARITY_INVDVAL
+/// - BOARD_LCD_CLOCKMODE
+/// - BOARD_LCD_TIMING_VFP
+/// - BOARD_LCD_TIMING_VBP
+/// - BOARD_LCD_TIMING_VPW
+/// - BOARD_LCD_TIMING_VHDLY
+/// - BOARD_LCD_TIMING_HFP
+/// - BOARD_LCD_TIMING_HBP
+/// - BOARD_LCD_TIMING_HPW
+///
+/// !Touchscreen
+/// - BOARD_TOUCHSCREEN_ADCCLK
+/// - BOARD_TOUCHSCREEN_STARTUP
+/// - BOARD_TOUCHSCREEN_SHTIM
+/// - BOARD_TOUCHSCREEN_DEBOUNCE
+///
+/// !SD Card
+/// - BOARD_SD_MCI_BASE
+/// - BOARD_SD_MCI_ID
+/// - BOARD_SD_PINS
+/// - BOARD_SD_SLOT
+///
+/// !AC97
+/// - PINS_AC97
+///
+/// !ISI
+/// - BOARD_ISI_PIO_CNTRL1
+/// - BOARD_ISI_PIO_CNTRL2
+/// - BOARD_ISI_TWCK
+/// - BOARD_ISI_TWD
+/// - BOARD_ISI_MCK
+/// - BOARD_ISI_VSYNC
+/// - BOARD_ISI_HSYNC
+/// - BOARD_ISI_PCK
+/// - BOARD_ISI_PINS_DATA
+
+
+
+/// Base address of SPI peripheral connected to the dataflash.
+#define BOARD_AT45_A_SPI_BASE AT91C_BASE_SPI0
+/// Identifier of SPI peripheral connected to the dataflash.
+#define BOARD_AT45_A_SPI_ID AT91C_ID_SPI0
+/// Pins of the SPI peripheral connected to the dataflash.
+#define BOARD_AT45_A_SPI_PINS PINS_SPI0
+/// Dataflash SPI number.
+#define BOARD_AT45_A_SPI 0
+/// Chip select connected to the dataflash.
+#define BOARD_AT45_A_NPCS 0
+/// Chip select pin connected to the dataflash.
+#define BOARD_AT45_A_NPCS_PIN PIN_SPI0_NPCS0
+
+
+/// Base address of SPI peripheral connected to the serialflash.
+#define BOARD_AT26_A_SPI_BASE AT91C_BASE_SPI0
+/// Identifier of SPI peripheral connected to the dataflash.
+#define BOARD_AT26_A_SPI_ID AT91C_ID_SPI0
+/// Pins of the SPI peripheral connected to the dataflash.
+#define BOARD_AT26_A_SPI_PINS PINS_SPI0
+/// Dataflahs SPI number.
+#define BOARD_AT26_A_SPI 0
+/// Chip select connected to the dataflash.
+#define BOARD_AT26_A_NPCS 0
+/// Chip select pin connected to the dataflash.
+#define BOARD_AT26_A_NPCS_PIN PIN_SPI0_NPCS0
+
+/// LCD pin list.
+#define PINS_LCD \
+ {0x7FFFFFBD, AT91C_BASE_PIOE, AT91C_ID_PIOD_E, PIO_PERIPH_A, PIO_DEFAULT}
+/// Board is wired in RGB 565.
+#define BOARD_LCD_RGB565
+/// Display width in pixels.
+#define BOARD_LCD_WIDTH 480
+/// Display height in pixels.
+#define BOARD_LCD_HEIGHT 272
+/// Display resolution in bits per pixel (bpp).
+#define BOARD_LCD_BPP AT91C_LCDC_PIXELSIZE_TWENTYFOURBITSPERPIXEL
+/// Display interface width in bits.
+#define BOARD_LCD_IFWIDTH 24
+/// Frame size in pixels (height * width * bpp).
+#define BOARD_LCD_FRAMESIZE_PIXELS (BOARD_LCD_WIDTH * BOARD_LCD_HEIGHT * 24)
+/// Frame size in words (height * width * bpp / 32)
+#define BOARD_LCD_FRAMESIZE (BOARD_LCD_FRAMESIZE_PIXELS / 32)
+/// Frame rate in Hz.
+#define BOARD_LCD_FRAMERATE 60
+/// Pixel clock rate in Hz (frameSize * frameRate / interfaceWidth).
+#define BOARD_LCD_PIXELCLOCK (BOARD_LCD_FRAMESIZE_PIXELS * BOARD_LCD_FRAMERATE / BOARD_LCD_IFWIDTH)
+/// LCD display type.
+#define BOARD_LCD_DISPLAYTYPE AT91C_LCDC_DISTYPE_TFT
+/// LCDC polarity.
+#define BOARD_LCD_POLARITY_INVVD AT91C_LCDC_INVVD_NORMALPOL
+/// LCDVSYNC polarity.
+#define BOARD_LCD_POLARITY_INVFRAME AT91C_LCDC_INVFRAME_INVERTEDPOL
+/// LCDHSYNC polarity.
+#define BOARD_LCD_POLARITY_INVLINE AT91C_LCDC_INVLINE_INVERTEDPOL
+/// LCDDOTCLK polarity.
+#define BOARD_LCD_POLARITY_INVCLK AT91C_LCDC_INVCLK_NORMALPOL
+/// LCDDEN polarity.
+#define BOARD_LCD_POLARITY_INVDVAL AT91C_LCDC_INVDVAL_NORMALPOL
+/// Pixel clock mode.
+#define BOARD_LCD_CLOCKMODE AT91C_LCDC_CLKMOD_ALWAYSACTIVE
+#define BOARD_LCD_TIMING_VFP 2
+/// Vertical back porch in number of lines.
+#define BOARD_LCD_TIMING_VBP 2
+/// Vertical pulse width in LCDDOTCLK cycles.
+#define BOARD_LCD_TIMING_VPW 1//10
+/// Number of cycles between VSYNC edge and HSYNC rising edge.
+#define BOARD_LCD_TIMING_VHDLY 2
+/// Horizontal front porch in LCDDOTCLK cycles.
+#define BOARD_LCD_TIMING_HFP 2
+/// Horizontal back porch in LCDDOTCLK cycles.
+#define BOARD_LCD_TIMING_HBP 2
+/// Horizontal pulse width in LCDDOTCLK cycles.
+#define BOARD_LCD_TIMING_HPW 41
+
+/// Touchscreen ADC clock frequency to use.
+#define BOARD_TOUCHSCREEN_ADCCLK 1000000 // 8MHz max
+/// Touchscreen ADC startup time in µseconds.
+#define BOARD_TOUCHSCREEN_STARTUP 40
+/// Touchscreen ADC track and hold time in nanoseconds.
+#define BOARD_TOUCHSCREEN_SHTIM 1000 // min 1µs at 8MHz
+/// Touchscreen pen debounce time in nanoseconds.
+#define BOARD_TOUCHSCREEN_DEBOUNCE 10000000
+
+/// Base address of the MCI peripheral connected to the SD card.
+#define BOARD_SD_MCI_BASE AT91C_BASE_MCI0
+#if defined(ORIGIN_SD_PORT_MCI1)
+#undef BOARD_SD_MCI_BASE
+#define BOARD_SD_MCI_BASE AT91C_BASE_MCI1
+#endif
+/// Dma channel number the mci is using
+#define BOARD_MCI_DMA_CHANNEL 0
+/// Peripheral identifier of the MCI connected to the SD card.
+#define BOARD_SD_MCI_ID AT91C_ID_MCI0
+#if defined(ORIGIN_SD_PORT_MCI1)
+#undef BOARD_SD_MCI_ID
+#define BOARD_SD_MCI_ID AT91C_ID_MCI1
+#endif
+/// MCI pins that shall be configured to access the SD card.
+#define BOARD_SD_PINS PINS_MCI0
+#if defined(ORIGIN_SD_PORT_MCI1)
+#undef BOARD_SD_PINS
+#define BOARD_SD_PINS PINS_MCI1
+#endif
+/// MCI slot to which the SD card is connected to.
+#define BOARD_SD_SLOT MCI_SD_SLOTA
+#if defined(ORIGIN_SD_PORT_MCI1)
+#undef BOARD_SD_SLOT
+#define BOARD_SD_SLOT MCI_SD_SLOTA // MCI1 using MCI1's slotA
+#endif
+/// SD card write protection pin definition.
+//#define BOARD_SD_PIN_WP PINS_MCI1_WP
+/// SD card detection pin definition.
+#define BOARD_SD_PIN_CD PINS_MCI0_CD
+#if defined(ORIGIN_SD_PORT_MCI1)
+#undef BOARD_SD_PIN_CD
+#define BOARD_SD_PIN_CD PINS_MCI1_CD
+#endif
+/// MCI0 DMA hardware handshaking ID
+#define DMA_HW_SRC_REQ_ID_MCI0 AT91C_HDMA_SRC_PER_0
+#define DMA_HW_DEST_REQ_ID_MCI0 AT91C_HDMA_DST_PER_0
+/// MCI1 DMA hardware handshaking ID
+#define DMA_HW_SRC_REQ_ID_MCI1 AT91C_HDMA_SRC_PER_13
+#define DMA_HW_DEST_REQ_ID_MCI1 AT91C_HDMA_DST_PER_13
+/// SD DMA hardware handshaking ID
+#define BOARD_SD_DMA_HW_SRC_REQ_ID DMA_HW_SRC_REQ_ID_MCI0
+#define BOARD_SD_DMA_HW_DEST_REQ_ID DMA_HW_DEST_REQ_ID_MCI0
+#if defined(ORIGIN_SD_PORT_MCI1)
+#undef BOARD_SD_DMA_HW_SRC_REQ_ID
+#define BOARD_SD_DMA_HW_SRC_REQ_ID DMA_HW_SRC_REQ_ID_MCI1
+#undef BOARD_SD_DMA_HW_DEST_REQ_ID
+#define BOARD_SD_DMA_HW_DEST_REQ_ID DMA_HW_DEST_REQ_ID_MCI1
+#endif
+
+/// PHY address
+#define BOARD_EMAC_PHY_ADDR 0
+/// PHY Component
+#define BOARD_EMAC_PHY_COMP_DM9161 1
+/// Board EMAC power control - ALWAYS ON
+#define BOARD_EMAC_POWER_ALWAYS_ON
+/// Board EMAC work mode - RMII/MII ( 1 / 0 )
+#define BOARD_EMAC_MODE_RMII 1
+/// The PIN list of PIO for EMAC
+#define BOARD_EMAC_PINS { (1<<19)|(1<<13)|(1<<12)|(1<<16)|(1<<15)|(1<<14)\
+ |(1<<17)|(1<<18)|(1<<20)|(1<<21)|(1<<7),\
+ AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}, \
+ { (1<<11)|(1<<10)|(1<<26)|(1<<25)|(1<<27)|(1<<22)\
+ |(1<<29)|(1<<28),\
+ AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+/// The power up reset latch PIO for PHY
+#define BOARD_EMAC_PIN_TEST {(1<<17), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+#define BOARD_EMAC_PIN_RMII {(1<<29), AT91C_BASE_PIOA, AT91C_ID_PIOB, PIO_OUTPUT_1, PIO_DEFAULT}
+// We force the address
+//(1<<14) PHY address 0, (1<<15) PHY address 1, (1<<25) PHY address 2,
+//(1<<26) PHY address 3, (1<<28) PHY address 4
+#define BOARD_EMAC_PINS_PHYAD {(1<<14)|(1<<15),\
+ AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}, \
+ {(1<<26)|(1<<25)|(1<<28),\
+ AT91C_BASE_PIOA, AT91C_ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
+#define BOARD_EMAC_PIN_10BT {(1<<27), AT91C_BASE_PIOA, AT91C_ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
+#define BOARD_EMAC_PIN_RPTR {(1<<18), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/// The PIN Configure list for EMAC on power up reset (RMII)
+#define BOARD_EMAC_RST_PINS BOARD_EMAC_PINS_PHYAD, \
+ BOARD_EMAC_PIN_TEST, BOARD_EMAC_PIN_RMII, \
+ BOARD_EMAC_PIN_10BT, BOARD_EMAC_PIN_RPTR
+/// The runtime pin configure list for EMAC
+#define BOARD_EMAC_RUN_PINS BOARD_EMAC_PINS
+
+/// AC97 pins definition.
+#define PINS_AC97 {(1<<6)|(1<<7)|(1<<8)|(1<<9),\
+ AT91C_BASE_PIOD, AT91C_ID_PIOD_E, PIO_PERIPH_A, PIO_DEFAULT}
+
+/// ISI
+#define BOARD_ISI_V200
+#define BOARD_CAPTOR_OV9650
+#define BOARD_ISI_PIO_CTRL1 {(1<<12), AT91C_BASE_PIOD, AT91C_ID_PIOD_E, PIO_OUTPUT_0, PIO_DEFAULT}
+#define BOARD_ISI_PIO_CTRL2 {(1<<13), AT91C_BASE_PIOD, AT91C_ID_PIOD_E, PIO_OUTPUT_0, PIO_DEFAULT}
+#define BOARD_ISI_TWCK {(1<<21), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define BOARD_ISI_TWD {(1<<20), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+// PCK1 use instead of ISI_MCK
+#define BOARD_ISI_MCK {(1<<31), AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_B, PIO_DEFAULT}
+#define BOARD_ISI_VSYNC {(1<<29), AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
+#define BOARD_ISI_HSYNC {(1<<30), AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
+#define BOARD_ISI_PCK {(1<<28), AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
+#define BOARD_ISI_PINS_DATA {(1<<20)|(1<<21)|(1<<22)|(1<<23)|(1<<24)|(1<<25)|(1<<26)|(1<<27),\
+ AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT},\
+ {(1<<8)|(1<<9)|(1<<10)|(1<<11),\
+ AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_B, PIO_DEFAULT}
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "SAM9M11-EK - Memories"
+/// This page lists definitions related to external on-board memories.
+///
+/// !DDRAM
+/// - BOARD_DDRAM_SIZE
+/// - PINS_DDRAM
+/// - BOARD_DDRAM_BUSWIDTH
+/// - BOARD_SDRAM_BUSWIDTH
+///
+/// !Nandflash
+/// - PINS_NANDFLASH
+/// - BOARD_NF_EBI_COMMAND_ADDR
+/// - BOARD_NF_EBI_ADDRESS_ADDR
+/// - BOARD_NF_EBI_DATA_ADDR
+/// - BOARD_NF_CE_PIN
+/// - BOARD_NF_RB_PIN
+///
+/// !NorFlash
+/// - BOARD_NORFLASH_ADDR
+/// - BOARD_NORFLASH_DFT_BUS_SIZE
+
+/// Board DDRAM size
+#define BOARD_DDRAM_SIZE (128*1024*1024) // 128 MB
+/// List of all SDRAM pins definitions.
+#define PINS_DDRAM {0xFFFF0000, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_PERIPH_A, PIO_DEFAULT}
+/// DDRAM bus width.
+#define BOARD_DDRAM_BUSWIDTH 16
+/// SDRAM bus width.
+#define BOARD_SDRAM_BUSWIDTH 32
+
+/// Nandflash controller peripheral pins definition.
+#define PINS_NANDFLASH BOARD_NF_CE_PIN, BOARD_NF_RB_PIN
+/// Nandflash chip enable pin definition.
+#define BOARD_NF_CE_PIN {1 << 14, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
+/// Nandflash ready/busy pin definition.
+//#define BOARD_NF_RB_PIN {1 << 8, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_INPUT, PIO_PULLUP}
+#define BOARD_NF_RB_PIN {0, 0, 0, 0, 0}
+/// Address for transferring command bytes to the nandflash.
+#define BOARD_NF_COMMAND_ADDR 0x40400000
+/// Address for transferring address bytes to the nandflash.
+#define BOARD_NF_ADDRESS_ADDR 0x40200000
+/// Address for transferring data bytes to the nandflash.
+#define BOARD_NF_DATA_ADDR 0x40000000
+
+/// Address for transferring command bytes to the norflash.
+#define BOARD_NORFLASH_ADDR 0x10000000
+/// Default NOR bus size after power up reset
+#define BOARD_NORFLASH_DFT_BUS_SIZE 16
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "SAM9M11-EK- Individual chip definition"
+/// This page lists the definitions related to different chip's definition
+/// located in the board.h file for the SAM9M11-EK.
+#define BOARD_RTC_ID AT91C_ID_SYS
+
+/// Twi eeprom
+#define BOARD_ID_TWI_EEPROM AT91C_ID_TWI0
+#define BOARD_BASE_TWI_EEPROM AT91C_BASE_TWI0
+#define BOARD_PINS_TWI_EEPROM PINS_TWI0
+
+/// USART
+#define BOARD_PIN_USART_RXD PIN_USART0_RXD
+#define BOARD_PIN_USART_TXD PIN_USART0_TXD
+#define BOARD_PIN_USART_CTS PIN_USART0_CTS
+#define BOARD_PIN_USART_RTS PIN_USART0_RTS
+#define BOARD_USART_BASE AT91C_BASE_US0
+#define BOARD_ID_USART AT91C_ID_US0
+//------------------------------------------------------------------------------
+
+#endif //#ifndef BOARD_H
+
|