diff options
| author | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
|---|---|---|
| committer | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
| commit | 044ad7c3987460ede48ff27afd6bdb0ca05a0432 (patch) | |
| tree | 924818cdb0d39ca08aec540d18da7bd406eaae8c /boards/at91sam9m11-ek/board_memories.c | |
import at91lib from at91lib_20100901_softpack_1_9_v_1_0_svn_v1501120100901_softpack_1_9_v_1_0_svn_v15011
it's sad to see that atmel doesn't publish their svn repo or has
a centralized location or even puts proper version/release info
into the library itself
Diffstat (limited to 'boards/at91sam9m11-ek/board_memories.c')
| -rw-r--r-- | boards/at91sam9m11-ek/board_memories.c | 569 |
1 files changed, 569 insertions, 0 deletions
diff --git a/boards/at91sam9m11-ek/board_memories.c b/boards/at91sam9m11-ek/board_memories.c new file mode 100644 index 0000000..e1a7c18 --- /dev/null +++ b/boards/at91sam9m11-ek/board_memories.c @@ -0,0 +1,569 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*
+ Title: Memories implementation
+*/
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#include <board.h>
+#include <pio/pio.h>
+#include "board_memories.h"
+
+/*
+ Macros:
+ READ - Reads a register value. Useful to add trace information to read
+ accesses.
+ WRITE - Writes data in a register. Useful to add trace information to
+ write accesses.
+*/
+#define READ(peripheral, register) (peripheral->register)
+#define WRITE(peripheral, register, value) (peripheral->register = value)
+
+
+//------------------------------------------------------------------------------
+// Internal functions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+// Exported functions
+//------------------------------------------------------------------------------
+//------------------------------------------------------------------------------
+/// Changes the mapping of the chip so that the remap area mirrors the
+/// internal ROM or the EBI CS0.
+//------------------------------------------------------------------------------
+void BOARD_RemapRom()
+{
+ WRITE(AT91C_BASE_MATRIX, MATRIX_MRCR, 0);
+}
+
+//------------------------------------------------------------------------------
+/// Changes the mapping of the chip so that the remap area mirrors the
+/// internal RAM.
+//------------------------------------------------------------------------------
+void BOARD_RemapRam()
+{
+ WRITE(AT91C_BASE_MATRIX,
+ MATRIX_MRCR,
+ (AT91C_MATRIX_RCA926I | AT91C_MATRIX_RCA926D));
+}
+
+//------------------------------------------------------------------------------
+/// Configure DDR
+//------------------------------------------------------------------------------
+void BOARD_ConfigureDdram(unsigned char ddrModel, unsigned char busWidth)
+{
+ AT91PS_HDDRSDRC2 pDdrc = AT91C_BASE_DDR2C;
+ volatile unsigned int *pDdr = (unsigned int *) AT91C_DDR2;
+ int i;
+ volatile unsigned int cr = 0;
+ unsigned short ddrc_dbw = 0;
+
+ switch (busWidth) {
+ case 16:
+ default:
+ ddrc_dbw = AT91C_DDRC2_DBW_16_BITS;
+ break;
+
+ case 32:
+ ddrc_dbw = AT91C_DDRC2_DBW_32_BITS;
+ break;
+
+ }
+
+ // Enable DDR2 clock x2 in PMC
+ WRITE(AT91C_BASE_PMC, PMC_SCER, AT91C_PMC_DDR);
+
+
+ switch (ddrModel) {
+
+ case DDR_MICRON_MT47H64M8:
+
+ // Configure the DDR controller
+ WRITE(pDdrc, HDDRSDRC2_MDR, ddrc_dbw |
+ AT91C_DDRC2_MD_DDR2_SDRAM); // DDR2
+
+ // Program the DDR Controller
+ WRITE(pDdrc, HDDRSDRC2_CR, AT91C_DDRC2_NC_DDR10_SDR9 | // 10 column bits (1K)
+ AT91C_DDRC2_NR_14 | // 14 row bits (8K)
+ AT91C_DDRC2_CAS_3 | // CAS Latency 3
+ AT91C_DDRC2_DLL_RESET_DISABLED
+ ); // DLL not reset
+
+ // assume timings for 7.5ns min clock period
+ WRITE(pDdrc, HDDRSDRC2_T0PR, AT91C_DDRC2_TRAS_6 | // 6 * 7.5 = 45 ns
+ AT91C_DDRC2_TRCD_3 | // 3 * 7.5 = 22.5 ns
+ AT91C_DDRC2_TWR_2 | // 2 * 7.5 = 15 ns
+ AT91C_DDRC2_TRC_10 | // 10 * 7.5 = 75 ns
+ AT91C_DDRC2_TRP_3 | // 3 * 7.5 = 22.5 ns
+ AT91C_DDRC2_TRRD_2 | // 2 * 7.5 = 15 ns
+ AT91C_DDRC2_TWTR_1 | // 1 clock cycle
+ AT91C_DDRC2_TMRD_2); // 2 clock cycles
+
+ // pSDDRC->HDDRSDRC2_T1PR = 0x00000008;
+ WRITE(pDdrc, HDDRSDRC2_T1PR, AT91C_DDRC2_TXP_2 | // 2 * 7.5 = 15 ns
+ 200 << 16 | // 200 clock cycles, TXSRD: Exit self refresh delay to Read command
+ 27 << 8 | // 27 * 7.5 = 202 ns TXSNR: Exit self refresh delay to non read command
+ AT91C_DDRC2_TRFC_19 << 0); // 19 * 7.5 = 142 ns (must be 140 ns for 1Gb DDR)
+
+ WRITE(pDdrc, HDDRSDRC2_T2PR, AT91C_DDRC2_TRTP_2 | // 2 * 7.5 = 15 ns
+ AT91C_DDRC2_TRPA_2 | // 2 * 7.5 = 15 ns
+ AT91C_DDRC2_TXARDS_7 | // 7 clock cycles
+ AT91C_DDRC2_TXARD_2); // 2 clock cycles
+
+ /* pSDDRC->HDDRSDRC2_LPR = ( 5 << 16 | // TXSRD: Exit self refresh delay to Read command */
+ /* 5 << 8 | // TXSNR: Exit self refresh delay to non read command */
+ /* 8 << 0 // TRFC :row cycle delay */
+ /* ); */
+
+ // Initialization Step 1 + 2: NOP command -> allow to enable clk
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_NOP_CMD);
+ *pDdr = 0;
+
+ // Initialization Step 3 (must wait 200 us) (6 core cycles per iteration, core is at 396MHz: min 13200 loops)
+ for (i = 0; i < 13300; i++) {
+ asm(" nop");
+ }
+
+ // NOP command -> allow to enable cke
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_NOP_CMD);
+ *pDdr = 0;
+
+ // wait 400 ns min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 4: Set All Bank Precharge
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_PRCGALL_CMD);
+ *pDdr = 0;
+
+ // wait 400 ns min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 5: Set EMR operation (EMRS2)
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_EXT_LMR_CMD);
+ *((unsigned int *)((unsigned char *)pDdr + 0x4000000)) = 0;
+
+ // wait 2 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 6: Set EMR operation (EMRS3)
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_EXT_LMR_CMD);
+ *((unsigned int *)((unsigned char *)pDdr + 0x6000000)) = 0;
+
+ // wait 2 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 7: Set EMR operation (EMRS1)
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_EXT_LMR_CMD);
+ *((unsigned int *)((unsigned char *)pDdr + 0x2000000)) = 0;
+
+ // wait 2 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 8a: enable DLL reset
+ cr = READ(pDdrc, HDDRSDRC2_CR);
+ WRITE(pDdrc, HDDRSDRC2_CR, cr | AT91C_DDRC2_DLL_RESET_ENABLED);
+
+ // Initialization Step 8b: reset DLL
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_EXT_LMR_CMD);
+ //*(pDdr) = 0;
+
+ // wait 2 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 9: Set All Bank Precharge
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_PRCGALL_CMD);
+ *(pDdr) = 0;
+
+ // wait 400 ns min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 11: Set 1st CBR
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_RFSH_CMD);
+ *(pDdr) = 0;
+
+ // wait 10 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+
+ // Set 2nd CBR
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_RFSH_CMD);
+ *(pDdr) = 0;
+
+ // wait 10 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 12: disable DLL reset
+ cr = READ(pDdrc, HDDRSDRC2_CR);
+ WRITE(pDdrc, HDDRSDRC2_CR, cr & (~AT91C_DDRC2_DLL_RESET_ENABLED));
+
+ // Initialization Step 13: Set LMR operation
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_LMR_CMD);
+ *(pDdr) = 0;
+
+ // Skip Initialization Step 14 to 17 (not supported by the DDR2 model)
+
+ // Initialization Step 18: Set Normal mode
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_NORMAL_CMD);
+ *(pDdr) = 0;
+
+ //allow to do calibration of DLL
+ // address is used to avoid to corrupt bank 0 (in case of preloaded data) data value does not matter
+// *(pDdr + (2 * ddrBankSizeInWord)) = 0x0000FFFF;
+
+ // WRITE(DDRSDR_BASE + (2*__DDR_BANK_SIZE) + 4, 0x0000FFFF);
+ // data value should not matter but needs to set it to 0xaa5555aa to work around issue in HDDRSDRC2
+// *(pDdr + (2 * ddrBankSizeInWord + 4)) = 0xAA5555AA;
+
+ // Set Refresh timer
+ WRITE(pDdrc, HDDRSDRC2_RTR, 0x00000410);
+
+ // OK now we are ready to work on the DDRSDR
+
+ // wait for end of calibration
+ for (i = 0; i < 500; i++) {
+ asm(" nop");
+ }
+
+ break;
+
+
+ case DDR_SAMSUNG_M470T6554EZ3_CE6:
+
+ // Configure the DDR controller
+ WRITE(pDdrc, HDDRSDRC2_MDR, ddrc_dbw |
+ AT91C_DDRC2_MD_DDR2_SDRAM); // DDR2
+
+ // Program the DDR Controller
+ WRITE(pDdrc, HDDRSDRC2_CR, AT91C_DDRC2_NC_DDR10_SDR9 | // 10 column bits (1K)
+ AT91C_DDRC2_NR_13 | // 13 row bits (8K)
+ AT91C_DDRC2_CAS_3 | // CAS Latency 3
+ AT91C_DDRC2_DLL_RESET_DISABLED); // DLL not reset
+
+ // assume timings for 7.5ns min clock period
+ WRITE(pDdrc, HDDRSDRC2_T0PR, AT91C_DDRC2_TRAS_6 | // 6 * 7.5 = 45 ns
+ AT91C_DDRC2_TRCD_3 | // 3 * 7.5 = 22.5 ns
+ AT91C_DDRC2_TWR_2 | // 2 * 7.5 = 15 ns
+ AT91C_DDRC2_TRC_10 | // 10 * 7.5 = 75 ns
+ AT91C_DDRC2_TRP_3 | // 3 * 7.5 = 22.5 ns
+ AT91C_DDRC2_TRRD_2 | // 2 * 7.5 = 15 ns
+ AT91C_DDRC2_TWTR_1 | // 1 clock cycle
+ AT91C_DDRC2_TMRD_2); // 2 clock cycles
+
+ // pSDDRC->HDDRSDRC2_T1PR = 0x00000008;
+ WRITE(pDdrc, HDDRSDRC2_T1PR, AT91C_DDRC2_TXP_2 | // 2 * 7.5 = 15 ns
+ 200 << 16 | // 200 clock cycles, TXSRD: Exit self refresh delay to Read command
+ 27 << 8 | // 27 * 7.5 = 202 ns TXSNR: Exit self refresh delay to non read command
+ AT91C_DDRC2_TRFC_19 << 0); // 19 * 7.5 = 142 ns (must be 140 ns for 1Gb DDR)
+
+ WRITE(pDdrc, HDDRSDRC2_T2PR, AT91C_DDRC2_TRTP_2 | // 2 * 7.5 = 15 ns
+ AT91C_DDRC2_TRPA_2 | // 2 * 7.5 = 15 ns
+ AT91C_DDRC2_TXARDS_7 | // 7 clock cycles
+ AT91C_DDRC2_TXARD_2); // 2 clock cycles
+
+ /* pSDDRC->HDDRSDRC2_LPR = ( 5 << 16 | // TXSRD: Exit self refresh delay to Read command */
+ /* 5 << 8 | // TXSNR: Exit self refresh delay to non read command */
+ /* 8 << 0 // TRFC :row cycle delay */
+ /* ); */
+
+ // Initialization Step 1 + 2: NOP command -> allow to enable clk
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_NOP_CMD);
+ *pDdr = 0;
+
+ // TODO Initialization Step 3 (must wait 200 us) (6 core cycles per iteration, core is at 396MHz: min 13200 loops)
+ for (i = 0; i < 13300; i++) {
+ asm(" nop");
+ }
+
+ // NOP command -> allow to enable cke
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_NOP_CMD);
+ *pDdr = 0;
+
+ // wait 400 ns min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 4: Set All Bank Precharge
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_PRCGALL_CMD);
+ *pDdr = 0;
+
+ // wait 400 ns min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 5: Set EMR operation (EMRS2)
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_EXT_LMR_CMD);
+ *((unsigned int *)((unsigned char *)pDdr + 0x2000000)) = 0;
+
+ // wait 2 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 6: Set EMR operation (EMRS3)
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_EXT_LMR_CMD);
+ *((unsigned int *)((unsigned char *)pDdr + 0x3000000)) = 0;
+
+ // wait 2 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 7: Set EMR operation (EMRS1)
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_EXT_LMR_CMD);
+ *((unsigned int *)((unsigned char *)pDdr + 0x1000000)) = 0;
+
+ // wait 2 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 8a: enable DLL reset
+ cr = READ(pDdrc, HDDRSDRC2_CR);
+ WRITE(pDdrc, HDDRSDRC2_CR, cr | AT91C_DDRC2_DLL_RESET_ENABLED);
+
+ // Initialization Step 8b: reset DLL
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_EXT_LMR_CMD);
+ // *(pDdr) = 0;
+
+ // wait 2 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 9: Set All Bank Precharge
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_PRCGALL_CMD);
+ *(pDdr) = 0;
+
+ // wait 400 ns min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 11: Set 1st CBR
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_RFSH_CMD);
+ *(pDdr) = 0;
+
+ // wait 10 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+
+ // Set 2nd CBR
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_RFSH_CMD);
+ *(pDdr) = 0;
+
+ // wait 10 cycles min
+ for (i = 0; i < 100; i++) {
+ asm(" nop");
+ }
+
+ // Initialization Step 12: disable DLL reset
+ cr = READ(pDdrc, HDDRSDRC2_CR);
+ WRITE(pDdrc, HDDRSDRC2_CR, cr & (~AT91C_DDRC2_DLL_RESET_ENABLED));
+
+ // Initialization Step 13: Set LMR operation
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_LMR_CMD);
+ *(pDdr) = 0;
+
+ // Skip Initialization Step 14 to 17 (not supported by the DDR2 model)
+
+ // Initialization Step 18: Set Normal mode
+ WRITE(pDdrc, HDDRSDRC2_MR, AT91C_DDRC2_MODE_NORMAL_CMD);
+ *(pDdr) = 0;
+
+ //allow to do calibration of DLL
+ // address is used to avoid to corrupt bank 0 (in case of preloaded data) data value does not matter
+ // *(pDdr + (2 * ddrBankSizeInWord)) = 0x0000FFFF;
+
+ // WRITE(DDRSDR_BASE + (2*__DDR_BANK_SIZE) + 4, 0x0000FFFF);
+ // data value should not matter but needs to set it to 0xaa5555aa to work around issue in HDDRSDRC2
+ // *(pDdr + (2 * ddrBankSizeInWord + 4)) = 0xAA5555AA;
+
+ // Set Refresh timer
+ WRITE(pDdrc, HDDRSDRC2_RTR, 0x00000410); // = (64ms/8192)/7.8ns
+
+ // OK now we are ready to work on the DDRSDR
+
+ // wait for end of calibration
+ for (i = 0; i < 500; i++) {
+ asm(" nop");
+ }
+
+ break;
+
+
+ default:
+ break;
+ }
+}
+
+
+//------------------------------------------------------------------------------
+/// Initialize and configure the SDRAM
+//------------------------------------------------------------------------------
+void BOARD_ConfigureSdram(unsigned char busWidth)
+{
+
+ // TO BE IMPLEMENTED IN CASE SDRAM IS MOUNTED.
+
+}
+
+//------------------------------------------------------------------------------
+/// Configures the EBI for NandFlash access. Pins must be configured after or
+/// before calling this function.
+//------------------------------------------------------------------------------
+void BOARD_ConfigureNandFlash(unsigned char busWidth)
+{
+ // Configure EBI
+ AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_CS3A_SM;
+
+ // Configure SMC
+ AT91C_BASE_SMC->SMC_SETUP3 = 0x00020002;
+ AT91C_BASE_SMC->SMC_PULSE3 = 0x04040404;
+ AT91C_BASE_SMC->SMC_CYCLE3 = 0x00070007;
+ AT91C_BASE_SMC->SMC_CTRL3 = 0x00030003;
+
+ if (busWidth == 8) {
+
+ AT91C_BASE_SMC->SMC_CTRL3 |= AT91C_SMC_DBW_WIDTH_EIGTH_BITS;
+ }
+ else if (busWidth == 16) {
+
+ AT91C_BASE_SMC->SMC_CTRL3 |= AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS;
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Configures the EBI for NandFlash access at 48MHz. Pins must be configured
+/// after or before calling this function.
+//------------------------------------------------------------------------------
+void BOARD_ConfigureNandFlash48MHz(unsigned char busWidth)
+{
+ // Configure EBI
+ AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_CS3A_SM;
+
+ // Configure SMC
+ AT91C_BASE_SMC->SMC_SETUP3 = 0x00010001;
+ AT91C_BASE_SMC->SMC_PULSE3 = 0x04030302;
+ AT91C_BASE_SMC->SMC_CYCLE3 = 0x00070004;
+ AT91C_BASE_SMC->SMC_CTRL3 = (AT91C_SMC_READMODE
+ | AT91C_SMC_WRITEMODE
+ | AT91C_SMC_NWAITM_NWAIT_DISABLE
+ | ((0x1 << 16) & AT91C_SMC_TDF));
+
+ if (busWidth == 8) {
+
+ AT91C_BASE_SMC->SMC_CTRL3 |= AT91C_SMC_DBW_WIDTH_EIGTH_BITS;
+ }
+ else if (busWidth == 16) {
+
+ AT91C_BASE_SMC->SMC_CTRL3 |= AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS;
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Configures the EBI for NorFlash access
+/// \Param busWidth Bus width
+//------------------------------------------------------------------------------
+void BOARD_ConfigureNorFlash(unsigned char busWidth)
+{
+ // Configure SMC
+
+ AT91C_BASE_SMC->SMC_SETUP0 = 0x00000002;
+ AT91C_BASE_SMC->SMC_PULSE0 = 0x0A0A0A06;
+ AT91C_BASE_SMC->SMC_CYCLE0 = 0x000A000A;
+ AT91C_BASE_SMC->SMC_CTRL0 = (AT91C_SMC_READMODE
+ | AT91C_SMC_WRITEMODE
+ | AT91C_SMC_NWAITM_NWAIT_DISABLE
+ | ((0x1 << 16) & AT91C_SMC_TDF));
+
+ if (busWidth == 8) {
+ AT91C_BASE_SMC->SMC_CTRL0 |= AT91C_SMC_DBW_WIDTH_EIGTH_BITS;
+ }
+ else if (busWidth == 16) {
+ AT91C_BASE_SMC->SMC_CTRL0 |= AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS;
+ }
+ else if (busWidth == 32) {
+ AT91C_BASE_SMC->SMC_CTRL0 |= AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS;
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Configures the EBI for NorFlash access at 48MHz.
+/// \Param busWidth Bus width
+//------------------------------------------------------------------------------
+void BOARD_ConfigureNorFlash48MHz(unsigned char busWidth)
+{
+ // Configure SMC
+ AT91C_BASE_SMC->SMC_SETUP0 = 0x00000001;
+ AT91C_BASE_SMC->SMC_PULSE0 = 0x07070703;
+ AT91C_BASE_SMC->SMC_CYCLE0 = 0x00070007;
+ AT91C_BASE_SMC->SMC_CTRL0 = (AT91C_SMC_READMODE
+ | AT91C_SMC_WRITEMODE
+ | AT91C_SMC_NWAITM_NWAIT_DISABLE
+ | ((0x1 << 16) & AT91C_SMC_TDF));
+
+ if (busWidth == 8) {
+
+ AT91C_BASE_SMC->SMC_CTRL0 |= AT91C_SMC_DBW_WIDTH_EIGTH_BITS;
+ }
+ else if (busWidth == 16) {
+
+ AT91C_BASE_SMC->SMC_CTRL0 |= AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS;
+ }
+ else if (busWidth == 32) {
+
+ AT91C_BASE_SMC->SMC_CTRL0 |= AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS;
+ }
+}
|