diff options
| author | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
|---|---|---|
| committer | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
| commit | 044ad7c3987460ede48ff27afd6bdb0ca05a0432 (patch) | |
| tree | 924818cdb0d39ca08aec540d18da7bd406eaae8c /peripherals/emac | |
import at91lib from at91lib_20100901_softpack_1_9_v_1_0_svn_v1501120100901_softpack_1_9_v_1_0_svn_v15011
it's sad to see that atmel doesn't publish their svn repo or has
a centralized location or even puts proper version/release info
into the library itself
Diffstat (limited to 'peripherals/emac')
| -rw-r--r-- | peripherals/emac/emac.c | 914 | ||||
| -rw-r--r-- | peripherals/emac/emac.dir | 49 | ||||
| -rw-r--r-- | peripherals/emac/emac.h | 178 |
3 files changed, 1141 insertions, 0 deletions
diff --git a/peripherals/emac/emac.c b/peripherals/emac/emac.c new file mode 100644 index 0000000..09380f8 --- /dev/null +++ b/peripherals/emac/emac.c @@ -0,0 +1,914 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//-----------------------------------------------------------------------------
+// Headers
+//-----------------------------------------------------------------------------
+#include <board.h>
+#include "emac.h"
+#include <utility/trace.h>
+#include <utility/assert.h>
+#include <string.h>
+
+//------------------------------------------------------------------------------
+// Definitions
+//------------------------------------------------------------------------------
+/// The buffer addresses written into the descriptors must be aligned so the
+/// last few bits are zero. These bits have special meaning for the EMAC
+/// peripheral and cannot be used as part of the address.
+#define EMAC_ADDRESS_MASK ((unsigned int)0xFFFFFFFC)
+#define EMAC_LENGTH_FRAME ((unsigned int)0x0FFF) /// Length of frame mask
+
+// receive buffer descriptor bits
+#define EMAC_RX_OWNERSHIP_BIT (1 << 0)
+#define EMAC_RX_WRAP_BIT (1 << 1)
+#define EMAC_RX_SOF_BIT (1 << 14)
+#define EMAC_RX_EOF_BIT (1 << 15)
+
+// Transmit buffer descriptor bits
+#define EMAC_TX_LAST_BUFFER_BIT (1 << 15)
+#define EMAC_TX_WRAP_BIT (1 << 30)
+#define EMAC_TX_USED_BIT (1 << 31)
+#define EMAC_TX_RLE_BIT (1 << 29) /// Retry Limit Exceeded
+#define EMAC_TX_UND_BIT (1 << 28) /// Tx Buffer Underrun
+#define EMAC_TX_ERR_BIT (1 << 27) /// Exhausted in mid-frame
+#define EMAC_TX_ERR_BITS \
+ (EMAC_TX_RLE_BIT | EMAC_TX_UND_BIT | EMAC_TX_ERR_BIT)
+
+//-----------------------------------------------------------------------------
+// Circular buffer management
+//-----------------------------------------------------------------------------
+// Return count in buffer
+#define CIRC_CNT(head,tail,size) (((head) - (tail)) & ((size)-1))
+
+// Return space available, 0..size-1
+// We always leave one free char as a completely full buffer
+// has head == tail, which is the same as empty
+#define CIRC_SPACE(head,tail,size) CIRC_CNT((tail),((head)+1),(size))
+
+// Return count up to the end of the buffer.
+// Carefully avoid accessing head and tail more than once,
+// so they can change underneath us without returning inconsistent results
+#define CIRC_CNT_TO_END(head,tail,size) \
+ ({int end = (size) - (tail); \
+ int n = ((head) + end) & ((size)-1); \
+ n < end ? n : end;})
+
+// Return space available up to the end of the buffer
+#define CIRC_SPACE_TO_END(head,tail,size) \
+ ({int end = (size) - 1 - (head); \
+ int n = (end + (tail)) & ((size)-1); \
+ n <= end ? n : end+1;})
+
+// Increment head or tail
+#define CIRC_INC(headortail,size) \
+ headortail++; \
+ if(headortail >= size) { \
+ headortail = 0; \
+ }
+
+#define CIRC_EMPTY(circ) ((circ)->head == (circ)->tail)
+#define CIRC_CLEAR(circ) ((circ)->head = (circ)->tail = 0)
+
+
+//------------------------------------------------------------------------------
+// Structures
+//------------------------------------------------------------------------------
+#ifdef __ICCARM__ // IAR
+#pragma pack(4) // IAR
+#define __attribute__(...) // IAR
+#endif // IAR
+/// Describes the type and attribute of Receive Transfer descriptor.
+typedef struct _EmacRxTDescriptor {
+ unsigned int addr;
+ unsigned int status;
+} __attribute__((packed, aligned(8))) EmacRxTDescriptor, *PEmacRxTDescriptor;
+
+/// Describes the type and attribute of Transmit Transfer descriptor.
+typedef struct _EmacTxTDescriptor {
+ unsigned int addr;
+ unsigned int status;
+} __attribute__((packed, aligned(8))) EmacTxTDescriptor, *PEmacTxTDescriptor;
+#ifdef __ICCARM__ // IAR
+#pragma pack() // IAR
+#endif // IAR
+
+#ifdef __ICCARM__ // IAR
+#pragma data_alignment=8 // IAR
+#endif // IAR
+/// Descriptors for RX (required aligned by 8)
+typedef struct {
+ volatile EmacRxTDescriptor td[RX_BUFFERS];
+ EMAC_RxCallback rxCb; /// Callback function to be invoked once a frame has been received
+ unsigned short idx;
+} RxTd;
+
+#ifdef __ICCARM__ // IAR
+#pragma data_alignment=8 // IAR
+#endif // IAR
+/// Descriptors for TX (required aligned by 8)
+typedef struct {
+ volatile EmacTxTDescriptor td[TX_BUFFERS];
+ EMAC_TxCallback txCb[TX_BUFFERS]; /// Callback function to be invoked once TD has been processed
+ EMAC_WakeupCallback wakeupCb; /// Callback function to be invoked once several TD have been released
+ unsigned short wakeupThreshold; /// Number of free TD before wakeupCb is invoked
+ unsigned short head; /// Circular buffer head pointer incremented by the upper layer (buffer to be sent)
+ unsigned short tail; /// Circular buffer head pointer incremented by the IT handler (buffer sent)
+} TxTd;
+
+//------------------------------------------------------------------------------
+// Internal variables
+//------------------------------------------------------------------------------
+// Receive Transfer Descriptor buffer
+static volatile RxTd rxTd;
+// Transmit Transfer Descriptor buffer
+static volatile TxTd txTd;
+/// Send Buffer
+// Section 3.6 of AMBA 2.0 spec states that burst should not cross 1K Boundaries.
+// Receive buffer manager writes are burst of 2 words => 3 lsb bits of the address shall be set to 0
+#ifdef __ICCARM__ // IAR
+#pragma data_alignment=8 // IAR
+#endif // IAR
+static volatile unsigned char pTxBuffer[TX_BUFFERS * EMAC_TX_UNITSIZE] __attribute__((aligned(8)));
+
+#ifdef __ICCARM__ // IAR
+#pragma data_alignment=8 // IAR
+#endif // IAR
+/// Receive Buffer
+static volatile unsigned char pRxBuffer[RX_BUFFERS * EMAC_RX_UNITSIZE] __attribute__((aligned(8)));
+/// Statistics
+static volatile EmacStats EmacStatistics;
+
+//-----------------------------------------------------------------------------
+// Internal functions
+//-----------------------------------------------------------------------------
+
+//-----------------------------------------------------------------------------
+/// Wait PHY operation complete.
+/// Return 1 if the operation completed successfully.
+/// May be need to re-implemented to reduce CPU load.
+/// \param retry: the retry times, 0 to wait forever until complete.
+//-----------------------------------------------------------------------------
+static unsigned char EMAC_WaitPhy( unsigned int retry )
+{
+ unsigned int retry_count = 0;
+
+ while((AT91C_BASE_EMAC->EMAC_NSR & AT91C_EMAC_IDLE) == 0) {
+
+ // Dead LOOP!
+ if (retry == 0) {
+
+ continue;
+ }
+
+ // Timeout check
+ retry_count++;
+ if(retry_count >= retry) {
+
+ TRACE_ERROR("E: Wait PHY time out\n\r");
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+//-----------------------------------------------------------------------------
+/// Disable TX & reset registers and descriptor list
+//-----------------------------------------------------------------------------
+static void EMAC_ResetTx(void)
+{
+ unsigned int Index;
+ unsigned int Address;
+
+ // Disable TX
+ AT91C_BASE_EMAC->EMAC_NCR &= ~AT91C_EMAC_TE;
+ // Setup the TX descriptors.
+ CIRC_CLEAR(&txTd);
+ for(Index = 0; Index < TX_BUFFERS; Index++) {
+
+ Address = (unsigned int)(&(pTxBuffer[Index * EMAC_TX_UNITSIZE]));
+ txTd.td[Index].addr = Address;
+ txTd.td[Index].status = EMAC_TX_USED_BIT;
+ }
+ txTd.td[TX_BUFFERS - 1].status = EMAC_TX_USED_BIT | EMAC_TX_WRAP_BIT;
+ // Transmit Buffer Queue Pointer Register
+ AT91C_BASE_EMAC->EMAC_TBQP = (unsigned int) (txTd.td);
+}
+
+//-----------------------------------------------------------------------------
+/// Disable RX & reset registers and descriptor list
+//-----------------------------------------------------------------------------
+static void EMAC_ResetRx(void)
+{
+ unsigned int Index;
+ unsigned int Address;
+
+ // Disable RX
+ AT91C_BASE_EMAC->EMAC_NCR &= ~AT91C_EMAC_RE;
+ // Setup the RX descriptors.
+ rxTd.idx = 0;
+ for(Index = 0; Index < RX_BUFFERS; Index++) {
+
+ Address = (unsigned int)(&(pRxBuffer[Index * EMAC_RX_UNITSIZE]));
+ // Remove EMAC_RX_OWNERSHIP_BIT and EMAC_RX_WRAP_BIT
+ rxTd.td[Index].addr = Address & EMAC_ADDRESS_MASK;
+ rxTd.td[Index].status = 0;
+ }
+ rxTd.td[RX_BUFFERS - 1].addr |= EMAC_RX_WRAP_BIT;
+ // Receive Buffer Queue Pointer Register
+ AT91C_BASE_EMAC->EMAC_RBQP = (unsigned int) (rxTd.td);
+}
+
+//-----------------------------------------------------------------------------
+// Exported functions
+//-----------------------------------------------------------------------------
+
+//-----------------------------------------------------------------------------
+// PHY management functions
+//-----------------------------------------------------------------------------
+
+//-----------------------------------------------------------------------------
+/// Set MDC clock according to current board clock. Per 802.3, MDC should be
+/// less then 2.5MHz.
+/// Return 1 if successfully, 0 if MDC clock not found.
+//-----------------------------------------------------------------------------
+unsigned char EMAC_SetMdcClock( unsigned int mck )
+{
+ int clock_dividor;
+
+ if (mck <= 20000000) {
+ clock_dividor = AT91C_EMAC_CLK_HCLK_8; /// MDC clock = MCK/8
+ }
+ else if (mck <= 40000000) {
+ clock_dividor = AT91C_EMAC_CLK_HCLK_16; /// MDC clock = MCK/16
+ }
+ else if (mck <= 80000000) {
+ clock_dividor = AT91C_EMAC_CLK_HCLK_32; /// MDC clock = MCK/32
+ }
+ else if (mck <= 160000000) {
+ clock_dividor = AT91C_EMAC_CLK_HCLK_64; /// MDC clock = MCK/64
+ }
+ else {
+ TRACE_ERROR("E: No valid MDC clock.\n\r");
+ return 0;
+ }
+ AT91C_BASE_EMAC->EMAC_NCFGR = (AT91C_BASE_EMAC->EMAC_NCFGR & (~AT91C_EMAC_CLK))
+ | clock_dividor;
+ return 1;
+}
+
+//-----------------------------------------------------------------------------
+/// Enable MDI with PHY
+//-----------------------------------------------------------------------------
+void EMAC_EnableMdio( void )
+{
+ AT91C_BASE_EMAC->EMAC_NCR |= AT91C_EMAC_MPE;
+}
+
+//-----------------------------------------------------------------------------
+/// Enable MDI with PHY
+//-----------------------------------------------------------------------------
+void EMAC_DisableMdio( void )
+{
+ AT91C_BASE_EMAC->EMAC_NCR &= ~AT91C_EMAC_MPE;
+}
+
+//-----------------------------------------------------------------------------
+/// Enable MII mode for EMAC, called once after autonegotiate
+//-----------------------------------------------------------------------------
+void EMAC_EnableMII( void )
+{
+ AT91C_BASE_EMAC->EMAC_USRIO = AT91C_EMAC_CLKEN;
+}
+
+//-----------------------------------------------------------------------------
+/// Enable RMII mode for EMAC, called once after autonegotiate
+//-----------------------------------------------------------------------------
+void EMAC_EnableRMII( void )
+{
+ AT91C_BASE_EMAC->EMAC_USRIO = AT91C_EMAC_CLKEN | AT91C_EMAC_RMII;
+}
+
+//-----------------------------------------------------------------------------
+/// Read PHY register.
+/// Return 1 if successfully, 0 if timeout.
+/// \param PhyAddress PHY Address
+/// \param Address Register Address
+/// \param pValue Pointer to a 32 bit location to store read data
+/// \param retry The retry times, 0 to wait forever until complete.
+//-----------------------------------------------------------------------------
+unsigned char EMAC_ReadPhy(unsigned char PhyAddress,
+ unsigned char Address,
+ unsigned int *pValue,
+ unsigned int retry)
+{
+ AT91C_BASE_EMAC->EMAC_MAN = (AT91C_EMAC_SOF & (0x01 << 30))
+ | (AT91C_EMAC_CODE & (2 << 16))
+ | (AT91C_EMAC_RW & (2 << 28))
+ | (AT91C_EMAC_PHYA & ((PhyAddress & 0x1f) << 23))
+ | (AT91C_EMAC_REGA & (Address << 18));
+
+ if ( EMAC_WaitPhy(retry) == 0 ) {
+
+ TRACE_ERROR("TimeOut EMAC_ReadPhy\n\r");
+ return 0;
+ }
+ *pValue = ( AT91C_BASE_EMAC->EMAC_MAN & 0x0000ffff );
+ return 1;
+}
+
+//-----------------------------------------------------------------------------
+/// Write PHY register
+/// Return 1 if successfully, 0 if timeout.
+/// \param PhyAddress PHY Address
+/// \param Address Register Address
+/// \param Value Data to write ( Actually 16 bit data )
+/// \param retry The retry times, 0 to wait forever until complete.
+//-----------------------------------------------------------------------------
+unsigned char EMAC_WritePhy(unsigned char PhyAddress,
+ unsigned char Address,
+ unsigned int Value,
+ unsigned int retry)
+{
+ AT91C_BASE_EMAC->EMAC_MAN = (AT91C_EMAC_SOF & (0x01 << 30))
+ | (AT91C_EMAC_CODE & (2 << 16))
+ | (AT91C_EMAC_RW & (1 << 28))
+ | (AT91C_EMAC_PHYA & ((PhyAddress & 0x1f) << 23))
+ | (AT91C_EMAC_REGA & (Address << 18))
+ | (AT91C_EMAC_DATA & Value) ;
+ if ( EMAC_WaitPhy(retry) == 0 ) {
+
+ TRACE_ERROR("TimeOut EMAC_WritePhy\n\r");
+ return 0;
+ }
+ return 1;
+}
+
+//-----------------------------------------------------------------------------
+/// Setup the EMAC for the link : speed 100M/10M and Full/Half duplex
+/// \param speed Link speed, 0 for 10M, 1 for 100M
+/// \param fullduplex 1 for Full Duplex mode
+//-----------------------------------------------------------------------------
+void EMAC_SetLinkSpeed(unsigned char speed, unsigned char fullduplex)
+{
+ unsigned int ncfgr;
+
+ ncfgr = AT91C_BASE_EMAC->EMAC_NCFGR;
+ ncfgr &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
+ if (speed) {
+
+ ncfgr |= AT91C_EMAC_SPD;
+ }
+ if (fullduplex) {
+
+ ncfgr |= AT91C_EMAC_FD;
+ }
+ AT91C_BASE_EMAC->EMAC_NCFGR = ncfgr;
+}
+
+
+
+//-----------------------------------------------------------------------------
+// EMAC functions
+//-----------------------------------------------------------------------------
+
+//-----------------------------------------------------------------------------
+/// EMAC Interrupt handler
+//-----------------------------------------------------------------------------
+void EMAC_Handler(void)
+{
+ volatile EmacTxTDescriptor *pTxTd;
+ volatile EMAC_TxCallback *pTxCb;
+ volatile unsigned int isr;
+ volatile unsigned int rsr;
+ volatile unsigned int tsr;
+ unsigned int rxStatusFlag;
+ unsigned int txStatusFlag;
+
+ //TRACE_DEBUG("EMAC_Handler\n\r");
+ isr = AT91C_BASE_EMAC->EMAC_ISR;
+ rsr = AT91C_BASE_EMAC->EMAC_RSR;
+ tsr = AT91C_BASE_EMAC->EMAC_TSR;
+ isr &= ~(AT91C_BASE_EMAC->EMAC_IMR | 0xFFC300);
+
+ // RX packet
+ if ((isr & AT91C_EMAC_RCOMP) || (rsr & AT91C_EMAC_REC)) {
+ rxStatusFlag = AT91C_EMAC_REC;
+
+ // Frame received
+ EmacStatistics.rx_packets++;
+
+ // Check OVR
+ if (rsr & AT91C_EMAC_OVR) {
+ rxStatusFlag |= AT91C_EMAC_OVR;
+ EmacStatistics.rx_ovrs++;
+ }
+ // Check BNA
+ if (rsr & AT91C_EMAC_BNA) {
+ rxStatusFlag |= AT91C_EMAC_BNA;
+ EmacStatistics.rx_bnas++;
+ }
+ // Clear status
+ AT91C_BASE_EMAC->EMAC_RSR |= rxStatusFlag;
+
+ // Invoke callbacks
+ if (rxTd.rxCb) {
+ rxTd.rxCb(rxStatusFlag);
+ }
+ }
+
+ // TX packet
+ if ((isr & AT91C_EMAC_TCOMP) || (tsr & AT91C_EMAC_COMP)) {
+
+ txStatusFlag = AT91C_EMAC_COMP;
+ EmacStatistics.tx_comp ++;
+
+ // A frame transmitted
+ // Check RLE
+ if (tsr & AT91C_EMAC_RLES) {
+ // Status RLE & Number of discarded buffers
+ txStatusFlag = AT91C_EMAC_RLES
+ | CIRC_CNT(txTd.head, txTd.tail, TX_BUFFERS);
+ pTxCb = txTd.txCb + txTd.tail;
+ EMAC_ResetTx();
+ TRACE_INFO("Tx RLE!!\n\r");
+ AT91C_BASE_EMAC->EMAC_NCR |= AT91C_EMAC_TE;
+ EmacStatistics.tx_errors++;
+ }
+ // Check COL
+ if (tsr & AT91C_EMAC_COL) {
+ txStatusFlag |= AT91C_EMAC_COL;
+ EmacStatistics.collisions++;
+ }
+ // Check BEX
+ if (tsr & AT91C_EMAC_BEX) {
+ txStatusFlag |= AT91C_EMAC_BEX;
+ EmacStatistics.tx_exausts++;
+ }
+ // Check UND
+ if (tsr & AT91C_EMAC_UND) {
+ txStatusFlag |= AT91C_EMAC_UND;
+ EmacStatistics.tx_underruns++;
+ }
+ // Clear status
+ AT91C_BASE_EMAC->EMAC_TSR |= txStatusFlag;
+
+ if (!CIRC_EMPTY(&txTd))
+ {
+ // Check the buffers
+ do {
+ pTxTd = txTd.td + txTd.tail;
+ pTxCb = txTd.txCb + txTd.tail;
+ // Any error?
+ // Exit if buffer has not been sent yet
+ if ((pTxTd->status & EMAC_TX_USED_BIT) == 0) {
+ break;
+ }
+
+ // Notify upper layer that a packet has been sent
+ if (*pTxCb) {
+ (*pTxCb)(txStatusFlag);
+ }
+
+ CIRC_INC( txTd.tail, TX_BUFFERS );
+ } while (CIRC_CNT(txTd.head, txTd.tail, TX_BUFFERS));
+ }
+
+ if (tsr & AT91C_EMAC_RLES) {
+ // Notify upper layer RLE
+ if (*pTxCb) {
+ (*pTxCb)(txStatusFlag);
+ }
+ }
+
+ // If a wakeup has been scheduled, notify upper layer that it can
+ // send other packets, send will be successfull.
+ if( (CIRC_SPACE(txTd.head, txTd.tail, TX_BUFFERS) >=
+ txTd.wakeupThreshold)
+ && txTd.wakeupCb) {
+ txTd.wakeupCb();
+ }
+ }
+
+ // PAUSE Frame
+ if (isr & AT91C_EMAC_PFRE) {
+ TRACE_INFO("Pause!\n\r");
+ }
+ if (isr & AT91C_EMAC_PTZ) {
+ TRACE_INFO("Pause TO!\n\r");
+ }
+}
+
+//-----------------------------------------------------------------------------
+/// Initialize the EMAC with the emac controller address
+/// \param id HW ID for power management
+/// \param pTxWakeUpfct Thresold TX Wakeup Callback
+/// \param pRxfct RX Wakeup Callback
+/// \param pMacAddress Mac Address
+/// \param enableCAF enable AT91C_EMAC_CAF if needed by application
+/// \param enableNBC AT91C_EMAC_NBC if needed by application
+//-----------------------------------------------------------------------------
+void EMAC_Init( unsigned char id, const unsigned char *pMacAddress,
+ unsigned char enableCAF, unsigned char enableNBC )
+{
+
+ // Check parameters
+ ASSERT(RX_BUFFERS * EMAC_RX_UNITSIZE > EMAC_FRAME_LENTGH_MAX,
+ "E: RX buffers too small\n\r");
+
+ TRACE_DEBUG("EMAC_Init\n\r");
+
+ // Power ON
+ AT91C_BASE_PMC->PMC_PCER = 1 << id;
+
+ // Disable TX & RX and more
+ AT91C_BASE_EMAC->EMAC_NCR = 0;
+
+ // disable
+ AT91C_BASE_EMAC->EMAC_IDR = ~0;
+
+ EMAC_ResetRx();
+ EMAC_ResetTx();
+
+ // Set the MAC address
+ if( pMacAddress != (unsigned char *)0 ) {
+ AT91C_BASE_EMAC->EMAC_SA1L = ( ((unsigned int)pMacAddress[3] << 24)
+ | ((unsigned int)pMacAddress[2] << 16)
+ | ((unsigned int)pMacAddress[1] << 8 )
+ | pMacAddress[0] );
+
+ AT91C_BASE_EMAC->EMAC_SA1H = ( ((unsigned int)pMacAddress[5] << 8 )
+ | pMacAddress[4] );
+ }
+
+ AT91C_BASE_EMAC->EMAC_NCR = AT91C_EMAC_CLRSTAT;
+
+ // Clear all status bits in the receive status register.
+ AT91C_BASE_EMAC->EMAC_RSR = (AT91C_EMAC_OVR | AT91C_EMAC_REC | AT91C_EMAC_BNA);
+
+ // Clear all status bits in the transmit status register
+ AT91C_BASE_EMAC->EMAC_TSR = ( AT91C_EMAC_UBR | AT91C_EMAC_COL | AT91C_EMAC_RLES
+ | AT91C_EMAC_BEX | AT91C_EMAC_COMP
+ | AT91C_EMAC_UND );
+
+ // Clear interrupts
+ AT91C_BASE_EMAC->EMAC_ISR;
+
+ // Enable the copy of data into the buffers
+ // ignore broadcasts, and don't copy FCS.
+ AT91C_BASE_EMAC->EMAC_NCFGR |= (AT91C_EMAC_DRFCS | AT91C_EMAC_PAE);
+
+ if( enableCAF == EMAC_CAF_ENABLE ) {
+ AT91C_BASE_EMAC->EMAC_NCFGR |= AT91C_EMAC_CAF;
+ }
+ if( enableNBC == EMAC_NBC_ENABLE ) {
+ AT91C_BASE_EMAC->EMAC_NCFGR |= AT91C_EMAC_NBC;
+ }
+
+ // Enable Rx and Tx, plus the stats register.
+ AT91C_BASE_EMAC->EMAC_NCR |= (AT91C_EMAC_TE | AT91C_EMAC_RE | AT91C_EMAC_WESTAT);
+
+ // Setup the interrupts for TX (and errors)
+ AT91C_BASE_EMAC->EMAC_IER = AT91C_EMAC_RXUBR
+ | AT91C_EMAC_TUNDR
+ | AT91C_EMAC_RLEX
+ | AT91C_EMAC_TXERR
+ | AT91C_EMAC_TCOMP
+ | AT91C_EMAC_ROVR
+ | AT91C_EMAC_HRESP
+ | AT91C_EMAC_PFRE
+ | AT91C_EMAC_PTZ
+ ;
+
+}
+
+//-----------------------------------------------------------------------------
+/// Reset TX & RX queue & statistics
+//-----------------------------------------------------------------------------
+void EMAC_Reset(void)
+{
+ EMAC_ResetRx();
+ EMAC_ResetTx();
+ memset((void*)&EmacStatistics, 0x00, sizeof(EmacStats));
+ AT91C_BASE_EMAC->EMAC_NCR |= (AT91C_EMAC_TE
+ | AT91C_EMAC_RE
+ | AT91C_EMAC_WESTAT
+ | AT91C_EMAC_CLRSTAT);
+
+}
+
+//-----------------------------------------------------------------------------
+/// Get the statstic information & reset it
+/// \param pStats Pointer to EmacStats structure to copy the informations
+/// \param reset Reset the statistics after copy it
+//-----------------------------------------------------------------------------
+void EMAC_GetStatistics(EmacStats *pStats, unsigned char reset)
+{
+ unsigned int ncrBackup = 0;
+
+ TRACE_DEBUG("EMAC_GetStatistics\n\r");
+
+ // Sanity check
+ if (pStats == (EmacStats *) 0) {
+ return;
+ }
+
+ ncrBackup = AT91C_BASE_EMAC->EMAC_NCR & (AT91C_EMAC_TE | AT91C_EMAC_RE);
+
+
+ // Copy the informations
+ memcpy(pStats, (void*)&EmacStatistics, sizeof(EmacStats));
+
+ // Reset the statistics
+ if (reset) {
+ memset((void*)&EmacStatistics, 0x00, sizeof(EmacStats));
+ AT91C_BASE_EMAC->EMAC_NCR = ncrBackup | AT91C_EMAC_CLRSTAT;
+ }
+}
+
+//-----------------------------------------------------------------------------
+/// Send a packet with EMAC.
+/// If the packet size is larger than transfer buffer size error returned.
+/// If packet transfer status is monitored, specify callback for each packet.
+/// \param buffer The buffer to be send
+/// \param size The size of buffer to be send
+/// \param fEMAC_TxCallback Threshold Wakeup callback
+/// \param fWakeUpCb TX Wakeup
+/// \return OK, Busy or invalid packet
+//-----------------------------------------------------------------------------
+unsigned char EMAC_Send(void *pBuffer,
+ unsigned int size,
+ EMAC_TxCallback fEMAC_TxCallback)
+{
+ volatile EmacTxTDescriptor *pTxTd;
+ volatile EMAC_TxCallback *pTxCb;
+
+ //TRACE_DEBUG("EMAC_Send\n\r");
+
+ // Check parameter
+ if (size > EMAC_TX_UNITSIZE) {
+
+ TRACE_ERROR("EMAC driver does not split send packets.");
+ TRACE_ERROR("%d bytes max in one packet (%d bytes requested)\n\r",
+ EMAC_TX_UNITSIZE, size);
+ return EMAC_TX_INVALID_PACKET;
+ }
+
+ // Pointers to the current TxTd
+ pTxTd = txTd.td + txTd.head;
+
+ // If no free TxTd, buffer can't be sent, schedule the wakeup callback
+ if( CIRC_SPACE(txTd.head, txTd.tail, TX_BUFFERS) == 0) {
+ if ((pTxTd->status & EMAC_TX_USED_BIT) != 0) {
+ //EMAC_ResetTx();
+ //TRACE_WARNING("Circ Full but FREE TD found\n\r");
+ //AT91C_BASE_EMAC->EMAC_NCR |= AT91C_EMAC_TE;
+ }
+ //else {
+ return EMAC_TX_BUFFER_BUSY;
+ //}
+ }
+
+ // Pointers to the current TxTd
+ pTxCb = txTd.txCb + txTd.head;
+
+ // Sanity check
+
+ // Setup/Copy data to transmition buffer
+ if (pBuffer && size) {
+ // Driver manage the ring buffer
+ memcpy((void *)pTxTd->addr, pBuffer, size);
+ }
+
+ // Tx Callback
+ *pTxCb = fEMAC_TxCallback;
+
+ // Update TD status
+ // The buffer size defined is length of ethernet frame
+ // so it's always the last buffer of the frame.
+ if (txTd.head == TX_BUFFERS-1) {
+ pTxTd->status =
+ (size & EMAC_LENGTH_FRAME) | EMAC_TX_LAST_BUFFER_BIT | EMAC_TX_WRAP_BIT;
+ }
+ else {
+ pTxTd->status = (size & EMAC_LENGTH_FRAME) | EMAC_TX_LAST_BUFFER_BIT;
+ }
+
+ CIRC_INC(txTd.head, TX_BUFFERS)
+
+ // Tx packets count
+ EmacStatistics.tx_packets++;
+
+ // Now start to transmit if it is not already done
+ AT91C_BASE_EMAC->EMAC_NCR |= AT91C_EMAC_TSTART;
+
+ return EMAC_TX_OK;
+}
+
+//-----------------------------------------------------------------------------
+/// Return current load of TX.
+//-----------------------------------------------------------------------------
+unsigned int EMAC_TxLoad(void)
+{
+ unsigned short head = txTd.head;
+ unsigned short tail = txTd.tail;
+ #if 1
+ return CIRC_CNT(head, tail, TX_BUFFERS);
+ #else
+ return (TX_BUFFERS - CIRC_SPACE(head, tail, TX_BUFFERS));
+ #endif
+}
+
+//-----------------------------------------------------------------------------
+/// Receive a packet with EMAC
+/// If not enough buffer for the packet, the remaining data is lost but right
+/// frame length is returned.
+/// \param pFrame Buffer to store the frame
+/// \param frameSize Size of the frame
+/// \param pRcvSize Received size
+/// \return OK, no data, or frame too small
+//-----------------------------------------------------------------------------
+unsigned char EMAC_Poll(unsigned char *pFrame,
+ unsigned int frameSize,
+ unsigned int *pRcvSize)
+{
+ unsigned short bufferLength;
+ unsigned int tmpFrameSize=0;
+ unsigned char *pTmpFrame=0;
+ unsigned int tmpIdx = rxTd.idx;
+ volatile EmacRxTDescriptor *pRxTd = rxTd.td + rxTd.idx;
+
+ ASSERT(pFrame, "F: EMAC_Poll\n\r");
+
+ char isFrame = 0;
+ // Set the default return value
+ *pRcvSize = 0;
+
+ // Process received RxTd
+ while ((pRxTd->addr & EMAC_RX_OWNERSHIP_BIT) == EMAC_RX_OWNERSHIP_BIT) {
+
+ // A start of frame has been received, discard previous fragments
+ if ((pRxTd->status & EMAC_RX_SOF_BIT) == EMAC_RX_SOF_BIT) {
+ // Skip previous fragment
+ while (tmpIdx != rxTd.idx) {
+ pRxTd = rxTd.td + rxTd.idx;
+ pRxTd->addr &= ~(EMAC_RX_OWNERSHIP_BIT);
+ CIRC_INC(rxTd.idx, RX_BUFFERS);
+ }
+ // Reset the temporary frame pointer
+ pTmpFrame = pFrame;
+ tmpFrameSize = 0;
+ // Start to gather buffers in a frame
+ isFrame = 1;
+ }
+
+ // Increment the pointer
+ CIRC_INC(tmpIdx, RX_BUFFERS);
+
+ // Copy data in the frame buffer
+ if (isFrame) {
+ if (tmpIdx == rxTd.idx) {
+ TRACE_INFO("no EOF (Invalid of buffers too small)\n\r");
+
+ do {
+
+ pRxTd = rxTd.td + rxTd.idx;
+ pRxTd->addr &= ~(EMAC_RX_OWNERSHIP_BIT);
+ CIRC_INC(rxTd.idx, RX_BUFFERS);
+ } while(tmpIdx != rxTd.idx);
+ return EMAC_RX_NO_DATA;
+ }
+ // Copy the buffer into the application frame
+ bufferLength = EMAC_RX_UNITSIZE;
+ if ((tmpFrameSize + bufferLength) > frameSize) {
+ bufferLength = frameSize - tmpFrameSize;
+ }
+
+ memcpy(pTmpFrame, (void*)(pRxTd->addr & EMAC_ADDRESS_MASK), bufferLength);
+ pTmpFrame += bufferLength;
+ tmpFrameSize += bufferLength;
+
+ // An end of frame has been received, return the data
+ if ((pRxTd->status & EMAC_RX_EOF_BIT) == EMAC_RX_EOF_BIT) {
+ // Frame size from the EMAC
+ *pRcvSize = (pRxTd->status & EMAC_LENGTH_FRAME);
+
+ // Application frame buffer is too small all data have not been copied
+ if (tmpFrameSize < *pRcvSize) {
+ printf("size req %d size allocated %d\n\r", *pRcvSize, frameSize);
+
+ return EMAC_RX_FRAME_SIZE_TOO_SMALL;
+ }
+
+ TRACE_DEBUG("packet %d-%d (%d)\n\r", rxTd.idx, tmpIdx, *pRcvSize);
+ // All data have been copied in the application frame buffer => release TD
+ while (rxTd.idx != tmpIdx) {
+ pRxTd = rxTd.td + rxTd.idx;
+ pRxTd->addr &= ~(EMAC_RX_OWNERSHIP_BIT);
+ CIRC_INC(rxTd.idx, RX_BUFFERS);
+ }
+ EmacStatistics.rx_packets++;
+ return EMAC_RX_OK;
+ }
+ }
+
+ // SOF has not been detected, skip the fragment
+ else {
+ pRxTd->addr &= ~(EMAC_RX_OWNERSHIP_BIT);
+ rxTd.idx = tmpIdx;
+ }
+
+ // Process the next buffer
+ pRxTd = rxTd.td + tmpIdx;
+ }
+
+ //TRACE_DEBUG("E");
+ return EMAC_RX_NO_DATA;
+}
+
+//-----------------------------------------------------------------------------
+/// Registers pRxCb callback. Callback will be invoked after the next received
+/// frame.
+/// When EMAC_Poll() returns EMAC_RX_NO_DATA the application task call EMAC_Set_RxCb()
+/// to register pRxCb() callback and enters suspend state. The callback is in charge
+/// to resume the task once a new frame has been received. The next time EMAC_Poll()
+/// is called, it will be successfull.
+/// \param pRxCb Pointer to callback function
+//-----------------------------------------------------------------------------
+void EMAC_Set_RxCb(EMAC_RxCallback pRxCb)
+{
+ rxTd.rxCb = pRxCb;
+ AT91C_BASE_EMAC->EMAC_IER = AT91C_EMAC_RCOMP;
+}
+
+//-----------------------------------------------------------------------------
+/// Remove the RX callback function.
+/// This function is usually invoked from the RX callback itself. Once the callback
+/// has resumed the application task, there is no need to invoke the callback again.
+//-----------------------------------------------------------------------------
+void EMAC_Clear_RxCb(void)
+{
+ AT91C_BASE_EMAC->EMAC_IDR = AT91C_EMAC_RCOMP;
+ rxTd.rxCb = (EMAC_RxCallback) 0;
+}
+
+//-----------------------------------------------------------------------------
+/// Registers TX wakeup callback callback. Callback will be invoked once several
+/// transfer descriptors are available.
+/// When EMAC_Send() returns EMAC_TX_BUFFER_BUSY (all TD busy) the application
+/// task calls EMAC_Set_TxWakeUpCb() to register pTxWakeUpCb() callback and
+/// enters suspend state. The callback is in charge to resume the task once
+/// several TD have been released. The next time EMAC_Send() will be called, it
+/// shall be successfull.
+/// \param pTxWakeUpCb Pointer to callback function
+/// \param threshold Minimum number of available transfer descriptors before pTxWakeUpCb() is invoked
+/// \return 0= success, 1 = threshold exceeds nuber of transfer descriptors
+//-----------------------------------------------------------------------------
+char EMAC_Set_TxWakeUpCb(EMAC_WakeupCallback pTxWakeUpCb, unsigned short threshold)
+{
+ if (threshold <= TX_BUFFERS) {
+ txTd.wakeupCb = pTxWakeUpCb;
+ txTd.wakeupThreshold = threshold;
+ return 0;
+ }
+ return 1;
+}
+
+//-----------------------------------------------------------------------------
+/// Remove the TX wakeup callback function.
+/// This function is usually invoked from the TX wakeup callback itself. Once the callback
+/// has resumed the application task, there is no need to invoke the callback again.
+//-----------------------------------------------------------------------------
+void EMAC_Clear_TxWakeUpCb(void)
+{
+ txTd.wakeupCb = (EMAC_WakeupCallback) 0;
+}
+
+
diff --git a/peripherals/emac/emac.dir b/peripherals/emac/emac.dir new file mode 100644 index 0000000..2facd09 --- /dev/null +++ b/peripherals/emac/emac.dir @@ -0,0 +1,49 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+/// \dir
+/// !Purpose
+///
+/// Definition of methods and structures for using EMAC
+///
+/// !Usage
+///
+/// -# Initialize EMAC with EMAC_Init with MAC address.
+/// -# Initialize the PHY driver
+/// -# Get a packet from network
+/// -# Interrupt mode: EMAC_Set_RxCb to register a function to process the frame packet
+/// -# Polling mode: EMAC_Poll for a data packet from network
+/// -# Send a packet to network with EMAC_Send.
+///
+//-----------------------------------------------------------------------------
+///
+///
+//------------------------------------------------------------------------------
+
diff --git a/peripherals/emac/emac.h b/peripherals/emac/emac.h new file mode 100644 index 0000000..f7484cd --- /dev/null +++ b/peripherals/emac/emac.h @@ -0,0 +1,178 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+// peripherals/emac/emac.h
+
+#ifndef EMAC_H
+#define EMAC_H
+
+//-----------------------------------------------------------------------------
+/// \dir
+/// !Purpose
+///
+/// Definition of methods and structures for using EMAC
+///
+/// !Usage
+///
+/// -# Initialize EMAC with EMAC_Init with MAC address.
+/// -# Then the caller application need to initialize the PHY driver before further calling EMAC
+/// driver.
+/// -# Get a packet from network
+/// -# Interrupt mode: EMAC_Set_RxCb to register a function to process the frame packet
+/// -# Polling mode: EMAC_Poll for a data packet from network
+/// -# Send a packet to network with EMAC_Send.
+///
+/// Please refer to the list of functions in the #Overview# tab of this unit
+/// for more detailed information.
+//-----------------------------------------------------------------------------
+
+
+//-----------------------------------------------------------------------------
+// Headers
+//-----------------------------------------------------------------------------
+#include <board.h>
+
+//-----------------------------------------------------------------------------
+// Definitions
+//-----------------------------------------------------------------------------
+
+/// Board EMAC base address
+#if !defined(AT91C_BASE_EMAC)
+ #if defined(AT91C_BASE_MACB)
+ #define AT91C_BASE_EMAC AT91C_BASE_MACB
+ #elif defined(AT91C_BASE_EMACB)
+ #define AT91C_BASE_EMAC AT91C_BASE_EMACB
+ #else
+ #error
+ #endif
+#endif
+
+/// Number of buffer for RX, be carreful: MUST be 2^n
+#define RX_BUFFERS 16
+/// Number of buffer for TX, be carreful: MUST be 2^n
+#define TX_BUFFERS 8
+
+/// Buffer Size
+#define EMAC_RX_UNITSIZE 128 /// Fixed size for RX buffer
+#define EMAC_TX_UNITSIZE 1518 /// Size for ETH frame length
+
+// The MAC can support frame lengths up to 1536 bytes.
+#define EMAC_FRAME_LENTGH_MAX 1536
+
+
+//-----------------------------------------------------------------------------
+// Types
+//-----------------------------------------------------------------------------
+
+//-----------------------------------------------------------------------------
+/// Describes the statistics of the EMAC.
+//-----------------------------------------------------------------------------
+typedef struct _EmacStats {
+
+ // TX errors
+ unsigned int tx_packets; /// Total Number of packets sent
+ unsigned int tx_comp; /// Packet complete
+ unsigned int tx_errors; /// TX errors ( Retry Limit Exceed )
+ unsigned int collisions; /// Collision
+ unsigned int tx_exausts; /// Buffer exhausted
+ unsigned int tx_underruns; /// Under Run, not able to read from memory
+ // RX errors
+ unsigned int rx_packets; /// Total Number of packets RX
+ unsigned int rx_eof; /// No EOF error
+ unsigned int rx_ovrs; /// Over Run, not able to store to memory
+ unsigned int rx_bnas; /// Buffer is not available
+
+} EmacStats, *PEmacStats;
+
+//-----------------------------------------------------------------------------
+// PHY Exported functions
+//-----------------------------------------------------------------------------
+extern unsigned char EMAC_SetMdcClock( unsigned int mck );
+
+extern void EMAC_EnableMdio( void );
+
+extern void EMAC_DisableMdio( void );
+
+extern void EMAC_EnableMII( void );
+
+extern void EMAC_EnableRMII( void );
+
+extern unsigned char EMAC_ReadPhy(unsigned char PhyAddress,
+ unsigned char Address,
+ unsigned int *pValue,
+ unsigned int retry);
+
+extern unsigned char EMAC_WritePhy(unsigned char PhyAddress,
+ unsigned char Address,
+ unsigned int Value,
+ unsigned int retry);
+
+extern void EMAC_SetLinkSpeed(unsigned char speed,
+ unsigned char fullduplex);
+
+//-----------------------------------------------------------------------------
+// EMAC Exported functions
+//-----------------------------------------------------------------------------
+/// Callback used by send function
+typedef void (*EMAC_TxCallback)(unsigned int status);
+typedef void (*EMAC_RxCallback)(unsigned int status);
+typedef void (*EMAC_WakeupCallback)(void);
+
+extern void EMAC_Init( unsigned char id, const unsigned char *pMacAddress,
+ unsigned char enableCAF, unsigned char enableNBC );
+#define EMAC_CAF_DISABLE 0
+#define EMAC_CAF_ENABLE 1
+#define EMAC_NBC_DISABLE 0
+#define EMAC_NBC_ENABLE 1
+
+extern void EMAC_Handler(void);
+
+extern void EMAC_Reset(void);
+
+extern unsigned char EMAC_Send(void *pBuffer,
+ unsigned int size,
+ EMAC_TxCallback fEMAC_TxCallback);
+/// Return for EMAC_Send function
+#define EMAC_TX_OK 0
+#define EMAC_TX_BUFFER_BUSY 1
+#define EMAC_TX_INVALID_PACKET 2
+
+
+extern unsigned char EMAC_Poll(unsigned char *pFrame,
+ unsigned int frameSize,
+ unsigned int *pRcvSize);
+/// Return for EMAC_Poll function
+#define EMAC_RX_OK 0
+#define EMAC_RX_NO_DATA 1
+#define EMAC_RX_FRAME_SIZE_TOO_SMALL 2
+
+extern void EMAC_GetStatistics(EmacStats *pStats, unsigned char reset);
+
+#endif // #ifndef EMAC_H
+
|