import at91lib from at91lib_20100901_softpack_1_9_v_1_0_svn_v1501120100901_softpack_1_9_v_1_0_svn_v15011

it's sad to see that atmel doesn't publish their svn repo or has
a centralized location or even puts proper version/release info
into the library itself

3 files changed, 320 insertions, 0 deletions

diff --git a/peripherals/slcdc/slcdc.c b/peripherals/slcdc/slcdc.c
new file mode 100644
index 0000000..59fc238
--- /dev/null
+++ b/peripherals/slcdc/slcdc.c
@@ -0,0 +1,192 @@
+/* ----------------------------------------------------------------------------

+ *         ATMEL Microcontroller Software Support 

+ * ----------------------------------------------------------------------------

+ * Copyright (c) 2008, Atmel Corporation

+ *

+ * All rights reserved.

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions are met:

+ *

+ * - Redistributions of source code must retain the above copyright notice,

+ * this list of conditions and the disclaimer below.

+ *

+ * Atmel's name may not be used to endorse or promote products derived from

+ * this software without specific prior written permission.

+ *

+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR

+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+ * ----------------------------------------------------------------------------

+ */

+

+//------------------------------------------------------------------------------

+//         Headers

+//------------------------------------------------------------------------------

+

+#include "slcdc.h"

+#include <board.h>

+#include <utility/assert.h>

+

+#include <string.h>

+

+//------------------------------------------------------------------------------

+//         Local definitions

+//------------------------------------------------------------------------------

+

+/// Size of SLCDC buffer in bytes.

+#define BUFFER_SIZE     320

+

+//------------------------------------------------------------------------------

+//         Global functions

+//------------------------------------------------------------------------------

+

+//------------------------------------------------------------------------------

+/// Initializes the Segment LCD controller.

+/// \param commons  Number of commons used by the display.

+/// \param segments  Number of segments used by the display.

+/// \param bias  Bias value.

+/// \param timeSetting  Buffer timing value.

+//------------------------------------------------------------------------------

+void SLCDC_Configure(

+    unsigned int commons,

+    unsigned int segments,

+    unsigned int bias,

+    unsigned int timeSetting)

+{

+    SANITY_CHECK((commons > 0) && (commons <= 10));

+    SANITY_CHECK((segments > 0) && (segments <= 40));

+    SANITY_CHECK((bias & ~AT91C_SLCDC_BIAS) == 0);

+    SANITY_CHECK((timeSetting & ~(0xF << 16)) == 0);  

+    SANITY_CHECK((timeSetting >> 16) < 0x0A);

+

+    // Enable peripheral clock

+    AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SLCD;

+    AT91C_BASE_SLCDC->SLCDC_MR = (commons - 1) | ((segments - 1) << 8) | bias | timeSetting;

+}

+

+//------------------------------------------------------------------------------

+/// Clears the SLCD display buffer.

+//------------------------------------------------------------------------------

+void SLCDC_Clear(void)

+{

+    memset((void *) AT91C_BASE_SLCDC->SLCDC_MEM, 0, BUFFER_SIZE);

+}

+

+//------------------------------------------------------------------------------

+/// Enables the SLCD controller.

+//------------------------------------------------------------------------------

+void SLCDC_Enable(void)

+{

+    AT91C_BASE_SLCDC->SLCDC_CR = AT91C_SLCDC_LCDEN;

+    while (AT91C_BASE_SLCDC -> SLCDC_SR != AT91C_SLCDC_ENA);

+}

+

+//------------------------------------------------------------------------------

+/// Disables the SLCD controller.

+//------------------------------------------------------------------------------

+void SLCDC_Disable(void)

+{

+    AT91C_BASE_SLCDC->SLCDC_CR = AT91C_SLCDC_LCDDIS;

+}

+

+//------------------------------------------------------------------------------

+/// Enables the SLCD low power mode.

+//------------------------------------------------------------------------------

+void SLCDC_EnableLowPowerMode(void)

+{

+    unsigned int value;

+

+    value = AT91C_BASE_SLCDC->SLCDC_MR;

+    value &= ~AT91C_SLCDC_LPMODE;

+    value |=AT91C_SLCDC_LPMODE;

+    AT91C_BASE_SLCDC->SLCDC_MR = value;

+}

+ 

+//------------------------------------------------------------------------------

+/// Disables the SLCD low power mode

+//------------------------------------------------------------------------------

+void SLCDC_DisableLowPowerMode(void)

+{

+    unsigned int value;

+

+    value = AT91C_BASE_SLCDC->SLCDC_MR;

+    value &= ~AT91C_SLCDC_LPMODE;

+    AT91C_BASE_SLCDC->SLCDC_MR = value;

+}

+

+//------------------------------------------------------------------------------

+/// Adjusts the frame frequency. Frequency = FsCLK / (prescaler * divider . NCOM)

+/// \param prescalerValue  Prescaler value

+/// \param dividerValue  Divider value

+//------------------------------------------------------------------------------

+void SLCDC_SetFrameFreq(unsigned int prescalerValue, unsigned int dividerValue)

+{

+    SANITY_CHECK((prescalerValue & ~AT91C_SLCDC_PRESC) == 0);

+    SANITY_CHECK((dividerValue & (~(0x07 << 8))) == 0);

+

+    AT91C_BASE_SLCDC->SLCDC_FRR = prescalerValue | dividerValue;

+}

+

+//------------------------------------------------------------------------------

+/// Sets the display mode (normal/force off/force on/blinking).

+/// \param mode  Display mode to be set

+//------------------------------------------------------------------------------

+void SLCDC_SetDisplayMode(unsigned int mode)

+{

+    unsigned int value;

+

+    SANITY_CHECK(mode < 8);

+           

+    value = AT91C_BASE_SLCDC->SLCDC_DR;

+    value &= ~AT91C_SLCDC_DISPMODE;

+    value |= mode;

+    AT91C_BASE_SLCDC->SLCDC_DR = value;

+}

+

+//------------------------------------------------------------------------------

+/// Adjusts the display blinking frequency.

+/// Blinking frequency = Frame Frequency / LCDBLKFREQ.

+/// \param frequency  Frequency value.

+//------------------------------------------------------------------------------

+void SLCDC_SetBlinkFreq(unsigned int frequency)

+{

+    unsigned int value;

+

+    SANITY_CHECK((frequency & ~(0xFF << 8)) == 0);

+

+    value = AT91C_BASE_SLCDC->SLCDC_DR;

+    value &= ~AT91C_SLCDC_BLKFREQ;

+    value |= frequency;           

+    AT91C_BASE_SLCDC->SLCDC_DR = frequency;

+}

+

+//------------------------------------------------------------------------------

+/// Enables the selected SLCDC interrupt sources.

+/// \param sources  Interrupt sources to enable.

+//------------------------------------------------------------------------------

+void SLCDC_EnableInterrupts(unsigned int sources)

+{

+    SANITY_CHECK((sources & 0xFFFFFFFA) == 0);

+

+    AT91C_BASE_SLCDC->SLCDC_IER = sources;

+}

+

+//------------------------------------------------------------------------------

+/// Disables the selected SLCDC interrupt sources.

+/// \param sources  Interrupt sources to disable.

+//------------------------------------------------------------------------------

+void SLCDC_DisableInterrupts(unsigned int sources)

+{

+    SANITY_CHECK((sources & 0xFFFFFFFA) == 0);

+

+    AT91C_BASE_SLCDC->SLCDC_IDR = sources;

+}

+

diff --git a/peripherals/slcdc/slcdc.dir b/peripherals/slcdc/slcdc.dir
new file mode 100644
index 0000000..08baa6f
--- /dev/null
+++ b/peripherals/slcdc/slcdc.dir
@@ -0,0 +1,35 @@
+/* ----------------------------------------------------------------------------

+ *         ATMEL Microcontroller Software Support 

+ * ----------------------------------------------------------------------------

+ * Copyright (c) 2008, Atmel Corporation

+ *

+ * All rights reserved.

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions are met:

+ *

+ * - Redistributions of source code must retain the above copyright notice,

+ * this list of conditions and the disclaimer below.

+ *

+ * Atmel's name may not be used to endorse or promote products derived from

+ * this software without specific prior written permission.

+ *

+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR

+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+ * ----------------------------------------------------------------------------

+ */

+

+//------------------------------------------------------------------------------

+/// \dir

+/// !!!Purpose

+///

+/// Contains the peripheral API for Segment LCD Controller (SLCDC) controller.

+//------------------------------------------------------------------------------

diff --git a/peripherals/slcdc/slcdc.h b/peripherals/slcdc/slcdc.h
new file mode 100644
index 0000000..2b18960
--- /dev/null
+++ b/peripherals/slcdc/slcdc.h
@@ -0,0 +1,93 @@
+/* ----------------------------------------------------------------------------

+ *         ATMEL Microcontroller Software Support 

+ * ----------------------------------------------------------------------------

+ * Copyright (c) 2008, Atmel Corporation

+ *

+ * All rights reserved.

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions are met:

+ *

+ * - Redistributions of source code must retain the above copyright notice,

+ * this list of conditions and the disclaimer below.

+ *

+ * Atmel's name may not be used to endorse or promote products derived from

+ * this software without specific prior written permission.

+ *

+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR

+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+ * ----------------------------------------------------------------------------

+ */

+

+//------------------------------------------------------------------------------

+/// \unit

+///

+/// !Purpose

+///

+/// Interface for configuration the Segment LCD Controller (SLCDC) peripheral.

+///

+/// !Usage

+///

+/// -# Initializes the Segment LCD controller using SLCDC_Configure().

+/// -# Clears the SLCD display buffer using SLCDC_Clear().

+/// -# Enable & disable SLCD controller using SLCDC_Enable() and SLCDC_Disable().

+/// -# Enables & disable the SLCD low power mode using SLCDC_EnableLowPowerMode () 

+/// and SLCDC_DisableLowPowerMode().   

+/// -# Adjusts the frame frequency using SLCDC_SetFrameFreq().

+/// -# Sets the display mode (normal/force off/force on/blinking) using 

+/// SLCDC_SetDisplayMode().

+/// -# Adjusts the display blinking frequency using SLCDC_SetBlinkFreq().

+/// -# Enables & disable the selected SLCDC interrupt sources using

+/// SLCDC_EnableInterrupts() and SLCDC_DisableInterrupts().

+//------------------------------------------------------------------------------

+

+#ifndef SLCDC_H

+#define SLCDC_H

+

+//------------------------------------------------------------------------------

+//         Global definitions

+//------------------------------------------------------------------------------

+

+/// Number of segments in SLCD.

+#define S7LEKLCD_NUM_SEGMENTS       40

+/// Number of commons in SLCD.

+#define S7LEKLCD_NUM_COMMONS        10

+

+//------------------------------------------------------------------------------

+//         Global functions

+//------------------------------------------------------------------------------

+

+extern void SLCDC_Configure(

+    unsigned int commons,

+    unsigned int segments,

+    unsigned int bias,

+    unsigned int timeSetting);

+

+extern void SLCDC_Clear(void);

+

+extern void SLCDC_Enable(void);

+

+extern void SLCDC_Disable(void);

+

+extern void SLCDC_SetFrameFreq(

+    unsigned int prescalerValue,

+    unsigned int dividerValue);

+

+extern void SLCDC_SetDisplayMode(unsigned int mode);

+

+extern void SLCDC_SetBlinkFreq(unsigned int frequency);

+

+extern void SLCDC_EnableInterrupts(unsigned int sources);

+

+extern void SLCDC_DisableInterrupts(unsigned int sources);

+

+#endif //#ifndef SLCDC_H

+