diff options
| author | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
|---|---|---|
| committer | Harald Welte <laforge@gnumonks.org> | 2011-07-04 20:52:54 +0200 |
| commit | 044ad7c3987460ede48ff27afd6bdb0ca05a0432 (patch) | |
| tree | 924818cdb0d39ca08aec540d18da7bd406eaae8c /peripherals/slck | |
import at91lib from at91lib_20100901_softpack_1_9_v_1_0_svn_v1501120100901_softpack_1_9_v_1_0_svn_v15011
it's sad to see that atmel doesn't publish their svn repo or has
a centralized location or even puts proper version/release info
into the library itself
Diffstat (limited to 'peripherals/slck')
| -rw-r--r-- | peripherals/slck/slck.c | 524 | ||||
| -rw-r--r-- | peripherals/slck/slck.dir | 35 | ||||
| -rw-r--r-- | peripherals/slck/slck.h | 49 |
3 files changed, 608 insertions, 0 deletions
diff --git a/peripherals/slck/slck.c b/peripherals/slck/slck.c new file mode 100644 index 0000000..c6b3d15 --- /dev/null +++ b/peripherals/slck/slck.c @@ -0,0 +1,524 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#include "slck.h"
+#include <board.h>
+#if defined(at91sam3u)
+#include <board_lowlevel.h>
+#endif
+#include <utility/assert.h>
+#include <utility/trace.h>
+
+//------------------------------------------------------------------------------
+// Local definitions
+//------------------------------------------------------------------------------
+
+/// Start Up Time Slow Clock 32K Oscillator // see DC characteritics in Datasheet
+#define T_ST_SLCK_32K_IN_MS 1200
+
+/// Start Up Time Slow Clock RC Oscillator // see DC characteritics in Datasheet
+#define T_ST_SLCK_RC_IN_US 75
+
+#define FREQ_SLCK_32K 32768 // see DC characteritics in Datasheet
+#define MIN_FREQ_SLCK_RC 20000 // see DC characteritics in Datasheet
+
+#define TIME_5_CYCLES_32K_IN_US ((2 * 5 * 1000000) / FREQ_SLCK_32K)
+#define TIME_5_CYCLES_RC_IN_US ((2 * 5 * 1000000) / MIN_FREQ_SLCK_RC)
+
+// Define clock timeout
+#define CLOCK_TIMEOUT 0xFFFFFFFF
+
+//------------------------------------------------------------------------------
+// Local functions
+//------------------------------------------------------------------------------
+#if defined(at91cap7) || defined(at91cap9)
+//------------------------------------------------------------------------------
+/// Wait time in ms
+//------------------------------------------------------------------------------
+// not precise, depends on the compiler and on the options
+static void WaitTimeInMs(unsigned int pck, unsigned int time_ms)
+{
+ register unsigned int i = 0;
+ i = (pck / 1000) * time_ms;
+ i = i / 4;
+ while(i--);
+}
+
+//------------------------------------------------------------------------------
+/// Wait time in us
+//------------------------------------------------------------------------------
+// not precise, depends on the compiler and on the options
+static void WaitTimeInUs(unsigned int pck, unsigned int time_us)
+{
+ volatile unsigned int i = 0;
+ i = (pck / 1000000) * time_us;
+ i = i / 4;
+ while(i--);
+}
+#endif
+//------------------------------------------------------------------------------
+// Global functions
+//------------------------------------------------------------------------------
+
+#if defined(at91cap7)
+//------------------------------------------------------------------------------
+/// Return 1 if the slow clock is 32k
+//------------------------------------------------------------------------------
+unsigned char SLCK_Is32k(void)
+{
+ return ((*AT91C_PMC_SR & AT91C_PMC_OSC_SEL) != 0);
+ //return ((*AT91C_SYS_SYS_OSCMR & AT91C_OSC32K_SEL) != 0);
+
+}
+
+//------------------------------------------------------------------------------
+/// Configure the 32kHz oscillator for the slow clock
+//------------------------------------------------------------------------------
+void SLCK_RCto32k(void)
+{
+ // Check that the master clock has a different source than slow clock. If no,
+ if( (AT91C_BASE_PMC->PMC_MCKR & AT91C_PMC_CSS) == 0)
+ {
+ TRACE_WARNING("The master clock use the slow clock. " \
+ "Not possible to change Slow clock\n\r");
+ return;
+ }
+
+ // Check that the slow clock source is RC
+ if( SLCK_Is32k() )
+ {
+ TRACE_WARNING("The slow clock is already the external 32.768kHz crystal\n\r");
+ return;
+ }
+
+ // Enable the 32,768 Hz oscillator by setting the bit OSC32K_XT_EN to 1.
+ *AT91C_SYS_SYS_OSCMR |= AT91C_OSC32K_XT_EN;
+
+ // Wait 32,768 Hz Startup Time for clock stabilization (software loop).
+ WaitTimeInMs(BOARD_MCK, /*T_ST_SLCK_32K_IN_MS*/10);
+
+ // Switch from internal RC to 32,768 Hz oscillator by setting the bit OSC32K_SEL to 1.
+ *AT91C_SYS_SYS_OSCMR |= AT91C_OSC32K_SEL;
+
+ TRACE_INFO("The slow clock is now the external 32.768kHz crystal\n\r");
+}
+
+
+//------------------------------------------------------------------------------
+/// Configure the RC oscillator for the slow clock
+//------------------------------------------------------------------------------
+void SLCK_32ktoRC(void)
+{
+ // Check that the master clock has a different source than slow clock.
+ if( (AT91C_BASE_PMC->PMC_MCKR & AT91C_PMC_CSS) == 0)
+ {
+ TRACE_WARNING("The master clock use the slow clock. " \
+ "Not possible to change Slow clock\n\r");
+ return;
+ }
+
+ // Check that the slow clock source is RC
+ if( !SLCK_Is32k() )
+ {
+ TRACE_WARNING("The slow clock is already the internal RC oscillator\n\r");
+ return;
+ }
+
+ // Enable the internal RC oscillator by setting the bit OSC32K_RC_EN to 1
+ *AT91C_SYS_SYS_OSCMR |= AT91C_OSC32K_RC_EN;
+
+ // Wait internal RC Startup Time for clock stabilization (software loop).
+ WaitTimeInUs(BOARD_MCK, T_ST_SLCK_RC_IN_US);
+
+ // Switch from 32768 Hz oscillator to internal RC by setting the bit OSC32K_SEL to 0.
+ *AT91C_SYS_SYS_OSCMR &= (0xFFFFFFFF ^ AT91C_OSC32K_SEL);
+
+ TRACE_INFO("The slow clock is now the internal RC oscillator\n\r");
+}
+
+//------------------------------------------------------------------------------
+/// by pass the 32kHz oscillator (*** not supported in CAP7 ***)
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// set Slow Clock Mode
+//------------------------------------------------------------------------------
+void SLCK_UtilSetSlowClockMode(unsigned int timeInSlowClockMode)
+{
+ unsigned int oldPll;
+ unsigned int oldMck;
+ unsigned int timeout = 0;
+
+ // Save previous values for PLL A and Master Clock configuration
+ oldPll = AT91C_BASE_CKGR->CKGR_PLLAR;
+ oldMck = AT91C_BASE_PMC->PMC_MCKR;
+
+ // Slow clock is selected for Master Clock
+ // 32kKz / 64 = 500Hz
+ // PCK = 500Hz, MCK = 500 Hz
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_SLOW_CLK | AT91C_PMC_PRES_CLK_64;
+ timeout = 0;
+ while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) && timeout++ < CLOCK_TIMEOUT);
+
+ // Stop PLL A
+ // MULA: PLL A Multiplier 0 = The PLL A is deactivated.
+ AT91C_BASE_CKGR->CKGR_PLLAR = 0x00003f00;
+
+ // Stop Main Oscillator
+ AT91C_BASE_CKGR->CKGR_MOR = AT91C_BASE_CKGR->CKGR_MOR & (~AT91C_CKGR_MOSCEN);
+
+ // Wait a while. The clock is at 500Hz...
+ while( timeInSlowClockMode-- );
+ // End !
+
+ // Restart Main Oscillator
+ AT91C_BASE_CKGR->CKGR_MOR = AT91C_BASE_CKGR->CKGR_MOR | (AT91C_CKGR_OSCOUNT & (0x32<<8) );
+ AT91C_BASE_CKGR->CKGR_MOR = AT91C_BASE_CKGR->CKGR_MOR | (AT91C_CKGR_MOSCEN);
+
+ // Restart PLL A
+ AT91C_BASE_CKGR->CKGR_PLLAR = oldPll;
+ timeout = 0;
+ while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCKA) && timeout++ < CLOCK_TIMEOUT);
+
+ // Selection of Master Clock MCK (so Processor Clock PCK)
+ AT91C_BASE_PMC->PMC_MCKR = oldMck;
+ timeout = 0;
+ while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) && timeout++ < CLOCK_TIMEOUT);
+
+ // Reconfigure DBGU
+ TRACE_CONFIGURE(DBGU_STANDARD, 115200, BOARD_MCK);
+}
+
+//------------------------------------------------------------------------------
+/// get the slow clock frequency
+//------------------------------------------------------------------------------
+unsigned int SLCK_UtilGetFreq(void)
+{
+ unsigned int freq = 0;
+
+ SLCK_UtilSetSlowClockMode(0);
+
+ if(AT91C_BASE_PMC->PMC_MCFR & (1<<16)) {
+ freq = BOARD_MAINOSC / (AT91C_BASE_PMC->PMC_MCFR & 0x0000FFFF);
+ freq *= 16;
+ }
+ return freq;
+}
+
+//#endif //#if defined(at91cap7)
+#elif defined(at91cap9)
+//------------------------------------------------------------------------------
+/// Return 1 if the slow clock is 32k
+//------------------------------------------------------------------------------
+unsigned char SLCK_Is32k(void)
+{
+ return ((*AT91C_SYS_SLCKSEL & AT91C_SLCKSEL_OSCSEL) != 0);
+}
+
+//------------------------------------------------------------------------------
+/// Configure the 32kHz oscillator for the slow clock
+//------------------------------------------------------------------------------
+void SLCK_RCto32k(void)
+{
+ // Check that the master clock has a different source than slow clock. If no,
+ if( (AT91C_BASE_PMC->PMC_MCKR & AT91C_PMC_CSS) == 0)
+ {
+ TRACE_WARNING("The master clock use the slow clock. " \
+ "Not possible to change Slow clock\n\r");
+ return;
+ }
+
+ // Check that the slow clock source is RC
+ if( SLCK_Is32k() )
+ {
+ TRACE_WARNING("The slow clock is already the external 32.768kHz crystal\n\r");
+ return;
+ }
+
+ // Enable the 32,768 Hz oscillator by setting the bit OSC32EN to 1.
+ *AT91C_SYS_SLCKSEL |= AT91C_SLCKSEL_OSC32EN;
+
+ // Wait 32,768 Hz Startup Time for clock stabilization (software loop).
+ WaitTimeInMs(BOARD_MCK*2, /*T_ST_SLCK_32K_IN_MS*/10);
+
+ // Switch from internal RC to 32,768 Hz oscillator by setting the bit OSCSEL to 1.
+ *AT91C_SYS_SLCKSEL |= AT91C_SLCKSEL_OSCSEL;
+
+ // Wait 5 slow clock cycles for internal resynchronization.
+ WaitTimeInUs(BOARD_MCK*2, TIME_5_CYCLES_32K_IN_US);
+
+ // Disable the RC oscillator by setting the bit RCEN to 0.
+ *AT91C_SYS_SLCKSEL &= (0xFFFFFFFF ^ AT91C_SLCKSEL_RCEN);
+
+ TRACE_INFO("The slow clock is now the external 32.768kHz crystal\n\r");
+}
+
+
+//------------------------------------------------------------------------------
+/// Configure the RC oscillator for the slow clock
+//------------------------------------------------------------------------------
+void SLCK_32ktoRC(void)
+{
+ // Check that the master clock has a different source than slow clock.
+ if( (AT91C_BASE_PMC->PMC_MCKR & AT91C_PMC_CSS) == 0)
+ {
+ TRACE_WARNING("The master clock use the slow clock. " \
+ "Not possible to change Slow clock\n\r");
+ return;
+ }
+
+ // Check that the slow clock source is RC
+ if( !SLCK_Is32k() )
+ {
+ TRACE_WARNING("The slow clock is already the internal RC oscillator\n\r");
+ return;
+ }
+
+ // Enable the internal RC oscillator by setting the bit RCEN to 1
+ *AT91C_SYS_SLCKSEL |= AT91C_SLCKSEL_RCEN;
+
+ // Wait internal RC Startup Time for clock stabilization (software loop).
+ WaitTimeInUs(BOARD_MCK*2, T_ST_SLCK_RC_IN_US);
+
+ // Switch from 32768 Hz oscillator to internal RC by setting the bit OSCSEL to 0.
+ *AT91C_SYS_SLCKSEL &= (0xFFFFFFFF ^ AT91C_SLCKSEL_OSCSEL);
+
+ // Wait 5 slow clock cycles for internal resynchronization.
+ WaitTimeInUs(BOARD_MCK*2, TIME_5_CYCLES_RC_IN_US);
+
+ // Disable the 32768 Hz oscillator by setting the bit OSC32EN to 0.
+ *AT91C_SYS_SLCKSEL &= (0xFFFFFFFF ^ AT91C_SLCKSEL_OSC32EN);
+
+ TRACE_INFO("The slow clock is now the internal RC oscillator\n\r");
+}
+
+//------------------------------------------------------------------------------
+/// by pass the 32kHz oscillator
+//------------------------------------------------------------------------------
+void SLCK_bypass32Kosc(void)
+{
+ // Enable the bypass path OSC32BYP bit set to 1
+ *AT91C_SYS_SLCKSEL |= AT91C_SLCKSEL_OSC32BYP;
+
+ // Disable the 32,768 Hz oscillator by setting the bit OSC32EN to 0
+ *AT91C_SYS_SLCKSEL &= (0xFFFFFFFF ^ AT91C_SLCKSEL_OSC32EN);
+}
+
+//------------------------------------------------------------------------------
+/// set Slow Clock Mode
+//------------------------------------------------------------------------------
+void SLCK_UtilSetSlowClockMode(unsigned int timeInSlowClockMode)
+{
+ unsigned int oldPll;
+ unsigned int oldMck;
+ unsigned int timeout = 0;
+
+ // Save previous values for PLL A and Master Clock configuration
+ oldPll = AT91C_BASE_CKGR->CKGR_PLLAR;
+ oldMck = AT91C_BASE_PMC->PMC_MCKR;
+
+ // Slow clock is selected for Master Clock
+ // 32kKz / 64 = 500Hz
+ // PCK = 500Hz, MCK = 250 Hz
+ AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_SLOW_CLK | AT91C_PMC_PRES_CLK_64 | AT91C_PMC_MDIV_2;
+ timeout = 0;
+ while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) && timeout++ < CLOCK_TIMEOUT);
+
+ // Stop PLL A
+ // MULA: PLL A Multiplier 0 = The PLL A is deactivated.
+ AT91C_BASE_CKGR->CKGR_PLLAR = 0x00003f00;
+
+ // Stop Main Oscillator
+ AT91C_BASE_CKGR->CKGR_MOR = AT91C_BASE_CKGR->CKGR_MOR & (~AT91C_CKGR_MOSCEN);
+
+ // Wait a while. The clock is at 500Hz...
+ while( timeInSlowClockMode-- );
+ // End !
+
+ // Restart Main Oscillator
+ AT91C_BASE_CKGR->CKGR_MOR = AT91C_BASE_CKGR->CKGR_MOR | (AT91C_CKGR_OSCOUNT & (0x32<<8) );
+ AT91C_BASE_CKGR->CKGR_MOR = AT91C_BASE_CKGR->CKGR_MOR | (AT91C_CKGR_MOSCEN);
+
+ // Restart PLL A
+ AT91C_BASE_CKGR->CKGR_PLLAR = oldPll;
+ timeout = 0;
+ while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCKA) && timeout++ < CLOCK_TIMEOUT);
+
+ // Selection of Master Clock MCK (so Processor Clock PCK)
+ AT91C_BASE_PMC->PMC_MCKR = oldMck;
+ timeout = 0;
+ while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) && timeout++ < CLOCK_TIMEOUT);
+
+ // Reconfigure DBGU
+ TRACE_CONFIGURE(DBGU_STANDARD, 115200, BOARD_MCK);
+}
+
+//------------------------------------------------------------------------------
+/// get the slow clock frequency
+//------------------------------------------------------------------------------
+unsigned int SLCK_UtilGetFreq(void)
+{
+ unsigned int freq = 0;
+
+ SLCK_UtilSetSlowClockMode(0);
+
+ if(AT91C_BASE_PMC->PMC_MCFR & (1<<16)) {
+ freq = BOARD_MAINOSC / (AT91C_BASE_PMC->PMC_MCFR & 0x0000FFFF);
+ freq *= 16;
+ }
+ return freq;
+}
+
+//#endif //#if defined(at91cap9)
+#elif defined(at91sam3u)
+
+//------------------------------------------------------------------------------
+/// Return 1 if the slow clock is 32k
+//------------------------------------------------------------------------------
+unsigned char SLCK_Is32k(void)
+{
+ return ((AT91C_BASE_SUPC->SUPC_SR & AT91C_SUPC_SR_OSCSEL_CRYST) != 0);
+}
+
+//------------------------------------------------------------------------------
+/// Configure the 32kHz oscillator for the slow clock
+//------------------------------------------------------------------------------
+void SLCK_RCto32k(void)
+{
+ unsigned int timeout = 0;
+
+ // Check that the master clock has a different source than slow clock. If no,
+ if( (AT91C_BASE_PMC->PMC_MCKR & AT91C_PMC_CSS) == 0)
+ {
+ TRACE_WARNING("The master clock use the slow clock. " \
+ "Not possible to change Slow clock\n\r");
+ return;
+ }
+
+ // Check that the slow clock source is RC
+ if( SLCK_Is32k() )
+ {
+ TRACE_WARNING("The slow clock is already the external 32.768kHz crystal\n\r");
+ return;
+ }
+
+ // Select the internal RC oscillator by set XTALSEL to 1.
+ AT91C_BASE_SUPC->SUPC_CR = AT91C_SUPC_CR_XTALSEL_CRYSTAL_SEL | (0xA5 << 24);
+ timeout = 0;
+ while (!(AT91C_BASE_SUPC->SUPC_SR & AT91C_SUPC_SR_OSCSEL_CRYST) && (timeout++ < CLOCK_TIMEOUT));
+
+ TRACE_INFO("The slow clock is now the external 32.768kHz crystal\n\r");
+}
+
+//------------------------------------------------------------------------------
+/// Configure the RC oscillator for the slow clock
+//------------------------------------------------------------------------------
+void SLCK_32ktoRC(void)
+{
+ TRACE_INFO("Switch to the internal RC oscillator is not possible for SAM3U!!!\n\r");
+}
+
+//------------------------------------------------------------------------------
+/// by pass the 32kHz oscillator
+//------------------------------------------------------------------------------
+void SLCK_bypass32Kosc(void)
+{
+ // Enable the bypass path OSCBYPASS by set to 1.
+ AT91C_BASE_SUPC->SUPC_MR |= AT91C_SUPC_MR_OSCBYPASS_BYPASS;
+}
+
+void SLCK_UtilSetSlowClockMode(unsigned int timeInSlowClockMode)
+{
+ unsigned int oldPll;
+ unsigned int oldMck;
+ unsigned int timeout = 0;
+
+ // Save previous values for PLL A and Master Clock configuration
+ oldPll = AT91C_BASE_CKGR->CKGR_PLLAR;
+ oldMck = AT91C_BASE_PMC->PMC_MCKR;
+
+ // Slow clock is selected for Master Clock
+ // 32kKz / 64 = 500Hz
+ // PCK = 500Hz, MCK = 500 Hz
+ AT91C_BASE_PMC->PMC_MCKR = (oldMck & AT91C_PMC_PRES) | AT91C_PMC_CSS_SLOW_CLK;
+ timeout = 0;
+ while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) && timeout++ < CLOCK_TIMEOUT);
+
+ // Stop PLL A
+ // MULA: PLL A Multiplier 0 = The PLL A is deactivated.
+ AT91C_BASE_CKGR->CKGR_PLLAR = 0x00003f00;
+
+ // Stop Main Oscillator
+ AT91C_BASE_CKGR->CKGR_MOR = AT91C_BASE_CKGR->CKGR_MOR & (~AT91C_CKGR_MOSCXTEN);
+
+ // Wait a while. The clock is at 500Hz...
+ while( timeInSlowClockMode-- );
+ // End !
+
+ // Restart Main Oscillator
+ AT91C_BASE_CKGR->CKGR_MOR = AT91C_BASE_CKGR->CKGR_MOR | (AT91C_CKGR_MOSCXTST & (0x32<<8) );
+ AT91C_BASE_CKGR->CKGR_MOR = AT91C_BASE_CKGR->CKGR_MOR | (AT91C_CKGR_MOSCXTEN);
+
+ // Restart PLL A
+ AT91C_BASE_CKGR->CKGR_PLLAR = oldPll;
+ timeout = 0;
+ while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCKA) && timeout++ < CLOCK_TIMEOUT);
+
+ // Selection of Master Clock MCK (so Processor Clock PCK)
+ AT91C_BASE_PMC->PMC_MCKR = oldMck;
+ timeout = 0;
+ while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) && timeout++ < CLOCK_TIMEOUT);
+
+ // Reconfigure DBGU
+ TRACE_CONFIGURE(DBGU_STANDARD, 115200, BOARD_MCK);
+}
+
+//------------------------------------------------------------------------------
+/// get the slow clock frequency
+//------------------------------------------------------------------------------
+unsigned int SLCK_UtilGetFreq(void)
+{
+ unsigned int freq = 0;
+
+ SetFlashWaitState(3);
+ SLCK_UtilSetSlowClockMode(0);
+
+ if(AT91C_BASE_PMC->PMC_MCFR & (1<<16)) {
+ freq = BOARD_MAINOSC / (AT91C_BASE_PMC->PMC_MCFR & 0x0000FFFF);
+ freq *= 16;
+ }
+ return freq;
+}
+
+#endif // endof at91sam3u
+
diff --git a/peripherals/slck/slck.dir b/peripherals/slck/slck.dir new file mode 100644 index 0000000..5210a1e --- /dev/null +++ b/peripherals/slck/slck.dir @@ -0,0 +1,35 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+/// \dir
+/// !!!Purpose
+///
+/// Contains the peripheral API for Supply Controller (SUPC) respect with slow clock .
+//------------------------------------------------------------------------------
diff --git a/peripherals/slck/slck.h b/peripherals/slck/slck.h new file mode 100644 index 0000000..5814492 --- /dev/null +++ b/peripherals/slck/slck.h @@ -0,0 +1,49 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+#ifndef SLCK_H
+#define SLCK_H
+
+//------------------------------------------------------------------------------
+// Global functions
+//------------------------------------------------------------------------------
+
+extern unsigned char SLCK_Is32k(void);
+
+extern void SLCK_RCto32k(void);
+
+extern void SLCK_32ktoRC(void);
+
+extern void SLCK_bypass32Kosc(void);
+
+extern void SLCK_UtilSetSlowClockMode(unsigned int timeInSlowClockMode);
+
+extern unsigned int SLCK_UtilGetFreq(void);
+
+#endif //#ifndef SLCK_H
|