1 files changed, 99 insertions, 0 deletions
diff --git a/memories/norflash/NorFlashIntel.h b/memories/norflash/NorFlashIntel.h
new file mode 100644
index 0000000..8934015
--- /dev/null
+++ b/memories/norflash/NorFlashIntel.h
@@ -0,0 +1,99 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support 
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+//------------------------------------------------------------------------------
+/// \unit
+///
+/// !!!Purpose
+/// 
+/// The INTERL %norflash Low-level driver code implement procedures to program 
+/// basic operations described INTEL-specified command set flash devices. 
+/// The various commands recognized by the devices are listed in the Commands 
+/// Tables provided in the corresponding INTEL command set compatible flash 
+/// datasheets. All operation functions are blocked, they wait for the 
+/// completion of an operation by polling the status register.
+///
+/// !!!Usage
+/// -# Flash program using INTEL_Write_Data().
+///    - The Program command is used to modify the data stored at the 
+///      specified device address. Programming can only change bits 
+///      from бо1бп to бо0бп. It may be necessary to erase the block before 
+///      programming to addresses within it. Programming modifies a single 
+///      Word at a time using static function intel_Program(). Programming 
+///      larger amounts of data must be done in one Word at a time by 
+///      giving a Program command, waiting for the command to complete, 
+///      giving the next Program command and so on.
+/// -# erase a block within the flash using INTEL_EraseSector().
+///    - Flash erase is performed on a block basis. An entire block is 
+///      erased each time an erase command sequence is given. 
+/// -# erase whole blocks within the flash using INTEL_EraseChip().
+/// -# INTEL_Reset() function can be issued, between Bus Write cycles 
+///    before the start of a program or erase operation, to return the 
+///    device to read mode.
+/// -# INTEL_ReadDeviceID() is used to retrieve information 
+///    about the Flash Device type.
+/// -# INTEL_ReadManufactoryId() is used to retrieve information 
+///    about the Flash Device Manufactory ID.
+//------------------------------------------------------------------------------
+#ifndef NORFLASHINTEL_H
+#define NORFLASHINTEL_H
+
+//------------------------------------------------------------------------------
+//         Local functions
+//------------------------------------------------------------------------------
+
+void INTEL_Reset(struct NorFlashInfo *pNorFlashInfo, unsigned int address);
+    
+unsigned int INTEL_ReadManufactoryId(struct NorFlashInfo *NorFlashInfo);
+    
+unsigned int INTEL_ReadDeviceID(struct NorFlashInfo *pNorFlashInfo);    
+
+unsigned char INTEL_EraseSector(
+    struct NorFlashInfo *NorFlashInfo, 
+    unsigned int sectorAddr);
+
+unsigned char INTEL_EraseChip(struct NorFlashInfo *NorFlashInfo);
+    
+unsigned char INTEL_Write_Data(
+    struct NorFlashInfo *NorFlashInfo,
+    unsigned int address,
+    unsigned char *buffer,
+    unsigned int size);
+
+const struct NorFlashOperations intelOperations = {
+   INTEL_Reset, 
+   INTEL_Write_Data,
+   INTEL_ReadManufactoryId, 
+   INTEL_ReadDeviceID,
+   INTEL_EraseChip,
+   INTEL_EraseSector
+   
+};
+
+#endif //#ifndef NORFLASHINTEL_H
+