diff options
Diffstat (limited to 'peripherals/aes')
| -rw-r--r-- | peripherals/aes/aes_p.c | 231 | ||||
| -rw-r--r-- | peripherals/aes/aes_p.h | 76 |
2 files changed, 307 insertions, 0 deletions
diff --git a/peripherals/aes/aes_p.c b/peripherals/aes/aes_p.c new file mode 100644 index 0000000..8614643 --- /dev/null +++ b/peripherals/aes/aes_p.c @@ -0,0 +1,231 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#include "aes_p.h"
+#include <board.h>
+#include <utility/trace.h>
+#include <utility/assert.h>
+
+//------------------------------------------------------------------------------
+// Global functions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// Configures the AES peripheral to encrypt/decrypt, start mode (manual, auto,
+/// PDC) and operating mode (ECB, CBC, OFB, CFB, CTR).
+/// \param cipher Indicates if the peripheral should encrypt or decrypt data.
+/// \param smode Start mode.
+/// \param opmode Operating mode.
+//------------------------------------------------------------------------------
+void AES_Configure(
+ unsigned char cipher,
+ unsigned int smode,
+ unsigned int opmode)
+{
+ TRACE_DEBUG("AES_Configure()\n\r");
+ SANITY_CHECK((cipher & 0xFFFFFFFE) == 0);
+ SANITY_CHECK((smode & 0xFFFFFCFF) == 0);
+ SANITY_CHECK((opmode & 0xFFFF8FFF) == 0);
+
+ // Reset the peripheral first
+ AT91C_BASE_AES->AES_CR = AT91C_AES_SWRST;
+
+ // Configure mode register
+ AT91C_BASE_AES->AES_MR = cipher | smode | opmode;
+}
+
+//------------------------------------------------------------------------------
+/// Sets the key used by the AES algorithm to cipher the plain text or
+/// decipher the encrypted text.
+/// \param pKey Pointer to a 16/24/32 bytes cipher key.
+//------------------------------------------------------------------------------
+void AES_SetKey(const unsigned int *pKey, unsigned char keyLength)
+{
+ TRACE_DEBUG("AES_SetKey()\n\r");
+ SANITY_CHECK(pKey);
+
+ AT91C_BASE_AES->AES_KEYWxR[0] = pKey[0];
+ AT91C_BASE_AES->AES_KEYWxR[1] = pKey[1];
+ AT91C_BASE_AES->AES_KEYWxR[2] = pKey[2];
+ AT91C_BASE_AES->AES_KEYWxR[3] = pKey[3];
+
+ if( keyLength >= 24 ) {
+ AT91C_BASE_AES->AES_KEYWxR[4] = pKey[4];
+ AT91C_BASE_AES->AES_KEYWxR[5] = pKey[5];
+ }
+ if( keyLength == 32 ) {
+ AT91C_BASE_AES->AES_KEYWxR[6] = pKey[6];
+ AT91C_BASE_AES->AES_KEYWxR[7] = pKey[7];
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Sets the initialization vector that is used to encrypt the plain text or
+/// decrypt the cipher text in chained block modes (CBC, CFB, OFB & CTR).
+/// \param pVector Pointer to a 16-bytes initialization vector.
+//------------------------------------------------------------------------------
+void AES_SetVector(const unsigned int *pVector)
+{
+ TRACE_DEBUG("AES_SetVector()\n\r");
+ SANITY_CHECK(pVector);
+
+ AT91C_BASE_AES->AES_IVxR[0] = pVector[0];
+ AT91C_BASE_AES->AES_IVxR[1] = pVector[1];
+ AT91C_BASE_AES->AES_IVxR[2] = pVector[2];
+ AT91C_BASE_AES->AES_IVxR[3] = pVector[3];
+}
+
+//------------------------------------------------------------------------------
+/// Sets the input data of the AES algorithm (i.e. plain text in cipher mode,
+/// ciphered text in decipher mode). If auto mode is active, the encryption is
+/// started automatically after writing the last word.
+/// \param pData Pointer to the 16-bytes data to cipher/decipher.
+//------------------------------------------------------------------------------
+void AES_SetInputData(const unsigned int *pData)
+{
+ TRACE_DEBUG("AES_SetInputData()\n\r");
+ SANITY_CHECK(pData);
+
+ AT91C_BASE_AES->AES_IDATAxR[0] = pData[0];
+ AT91C_BASE_AES->AES_IDATAxR[1] = pData[1];
+ AT91C_BASE_AES->AES_IDATAxR[2] = pData[2];
+ AT91C_BASE_AES->AES_IDATAxR[3] = pData[3];
+}
+
+//------------------------------------------------------------------------------
+/// Stores the result of the last AES operation (encrypt/decrypt) in the
+/// provided buffer.
+/// \param pData Pointer to a 16-bytes buffer.
+//------------------------------------------------------------------------------
+void AES_GetOutputData(unsigned int *pData)
+{
+ TRACE_DEBUG("AES_GetOutputData()\n\r");
+ SANITY_CHECK(pData);
+
+ pData[0] = AT91C_BASE_AES->AES_ODATAxR[0];
+ pData[1] = AT91C_BASE_AES->AES_ODATAxR[1];
+ pData[2] = AT91C_BASE_AES->AES_ODATAxR[2];
+ pData[3] = AT91C_BASE_AES->AES_ODATAxR[3];
+}
+
+//------------------------------------------------------------------------------
+/// Sets the input buffer to use when in PDC mode.
+/// \param pInput Pointer to the input buffer.
+//------------------------------------------------------------------------------
+void AES_SetInputBuffer(const unsigned int *pInput, unsigned char length)
+{
+ TRACE_DEBUG("AES_SetInputBuffer()\n\r");
+ SANITY_CHECK(pInput);
+
+#ifdef AT91C_BASE_PDC_AES
+ // Transmit Pointer Register
+ AT91C_BASE_AES->AES_TPR = (unsigned int) pInput;
+ // Transmit Counter Registers
+ AT91C_BASE_AES->AES_TCR = length;
+#else
+ //Start address
+ AT91C_BASE_HDMA->HDMA_CH[0].HDMA_SADDR = (unsigned int)pInput;
+ //Width and size
+ AT91C_BASE_HDMA->HDMA_CH[0].HDMA_CTRLA = ( length
+ | AT91C_HDMA_SCSIZE_1
+ | AT91C_HDMA_DCSIZE_4
+ | AT91C_HDMA_SRC_WIDTH_WORD
+ | AT91C_HDMA_DST_WIDTH_WORD );
+#endif
+}
+
+//------------------------------------------------------------------------------
+/// Sets the output buffer to use when in PDC mode.
+/// \param pOutput Pointer to the output buffer.
+//------------------------------------------------------------------------------
+void AES_SetOutputBuffer(unsigned int *pOutput, unsigned char length)
+{
+ TRACE_DEBUG("AES_SetOutputBuffer()\n\r");
+ SANITY_CHECK(pOutput);
+
+#ifdef AT91C_BASE_PDC_AES
+ // Receive Pointer Register
+ AT91C_BASE_AES->AES_RPR = (unsigned int) pOutput;
+ // Receive Counter Registers
+ AT91C_BASE_AES->AES_RCR = length;
+#else
+ //Destination address
+ AT91C_BASE_HDMA->HDMA_CH[1].HDMA_DADDR = (unsigned int)pOutput;
+
+ //Width and size
+ AT91C_BASE_HDMA->HDMA_CH[1].HDMA_CTRLA = ( length
+ | AT91C_HDMA_SCSIZE_4
+ | AT91C_HDMA_DCSIZE_1
+ | AT91C_HDMA_SRC_WIDTH_WORD
+ | AT91C_HDMA_DST_WIDTH_WORD );
+#endif
+}
+
+//------------------------------------------------------------------------------
+/// Starts the encryption/decryption process when in manual or PDC mode. In
+/// manual mode, the key and input data must have been entered using
+/// AES_SetKey() and AES_SetInputData(). In PDC mode, the key, input & output
+/// buffer must have been set using AES_SetKey(), AES_SetInputBuffer() and
+/// AES_SetOutputBuffer().
+//------------------------------------------------------------------------------
+void AES_Start(void)
+{
+ TRACE_DEBUG("AES_Start()\n\r");
+ SANITY_CHECK(((AT91C_BASE_AES->AES_MR & AT91C_AES_SMOD) == AT91C_AES_SMOD_MANUAL)
+ || ((AT91C_BASE_AES->AES_MR & AT91C_AES_SMOD) == AT91C_AES_SMOD_PDC));
+
+ // Manual mode
+ if ((AT91C_BASE_AES->AES_MR & AT91C_AES_SMOD) == AT91C_AES_SMOD_MANUAL) {
+
+ AT91C_BASE_AES->AES_CR = AT91C_AES_START;
+ }
+ // PDC
+ else {
+
+#ifdef AT91C_BASE_PDC_AES
+ AT91C_BASE_AES->AES_PTCR = AT91C_PDC_RXTEN | AT91C_PDC_TXTEN;
+#else
+ //Enable DMA chanels
+ AT91C_BASE_HDMA->HDMA_CHER = (1<<0) | (1<<1);
+#endif
+ }
+}
+
+//------------------------------------------------------------------------------
+/// Returns the current value of the AES interrupt status register.
+//------------------------------------------------------------------------------
+unsigned int AES_GetStatus(void)
+{
+ return AT91C_BASE_AES->AES_ISR;
+}
+
diff --git a/peripherals/aes/aes_p.h b/peripherals/aes/aes_p.h new file mode 100644 index 0000000..0e49983 --- /dev/null +++ b/peripherals/aes/aes_p.h @@ -0,0 +1,76 @@ +/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+#ifndef AES_H
+#define AES_H
+
+//------------------------------------------------------------------------------
+/// \unit
+///
+/// !Purpose
+///
+/// Methods to manage the Advanced Encryption Standard (AES)
+///
+/// !Usage
+///
+/// -# Configure AES
+/// -# Sets the key used by the AES algorithm
+/// -# Sets the input data of the AES algorithm
+/// -# Starts the encryption/decryption process
+/// -# Stores the result of the last AES operation
+///
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+// Global functions
+//------------------------------------------------------------------------------
+
+extern void AES_Configure(
+ unsigned char cipher,
+ unsigned int smode,
+ unsigned int opmode);
+
+extern void AES_SetKey(const unsigned int *pKey, unsigned char keyLength);
+
+extern void AES_SetVector(const unsigned int *pVector);
+
+extern void AES_SetInputData(const unsigned int *pData);
+
+extern void AES_GetOutputData(unsigned int *pData);
+
+extern void AES_SetInputBuffer(const unsigned int *pInput, unsigned char length);
+
+extern void AES_SetOutputBuffer(unsigned int *pOutput, unsigned char length);
+
+extern void AES_Start(void);
+
+extern unsigned int AES_GetStatus(void);
+
+#endif //#ifndef AES_H
+
|