1 files changed, 163 insertions, 0 deletions
diff --git a/usb/device/audio-looprec/AUDDLoopRecDriver.h b/usb/device/audio-looprec/AUDDLoopRecDriver.h
new file mode 100644
index 0000000..8db30a1
--- /dev/null
+++ b/usb/device/audio-looprec/AUDDLoopRecDriver.h
@@ -0,0 +1,163 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support 
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/**
+ \unit
+
+ !Purpose
+
+    Definition of a USB Audio Loop Record Driver with two playback channels
+    and one record channel.
+
+ !Usage
+
+    -# Enable and setup USB related pins (see pio & board.h).
+    -# Configure the USB Audio Loop Record driver using
+       AUDDLoopRecDriver_Initialize
+    -# To get %audio stream frames from host, use
+       AUDDLoopRecDriver_Read
+    -# To send %audio sampling stream to host, use
+       AUDDLoopRecDriver_Write
+
+*/
+
+#ifndef AUDDLoopRecDriver_H
+#define AUDDLoopRecDriver_H
+
+//------------------------------------------------------------------------------
+//         Headers
+//------------------------------------------------------------------------------
+
+#include <board.h>
+#include <usb/common/core/USBGenericRequest.h>
+#include <usb/device/core/USBD.h>
+
+//------------------------------------------------------------------------------
+//         Definitions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "Audio Loop Record stream information"
+///
+/// This page lists codes for USB Audio Loop Record stream information.
+///
+/// !Code
+/// - AUDDLoopRecDriver_SAMPLERATE
+/// - AUDDLoopRecDriver_NUMCHANNELS
+/// - AUDDLoopRecDriver_BYTESPERSAMPLE
+/// - AUDDLoopRecDriver_BITSPERSAMPLE
+/// - AUDDLoopRecDriver_SAMPLESPERFRAME
+/// - AUDDLoopRecDriver_BYTESPERFRAME
+
+#if defined(at91sam7s) || defined(at91sam9xe)
+ /// Sample rate in Hz.
+ #define AUDDLoopRecDriver_SAMPLERATE        32000
+ /// Number of channels in audio stream.
+ #define AUDDLoopRecDriver_NUMCHANNELS       1
+ /// Number of bytes in one sample.
+ #define AUDDLoopRecDriver_BYTESPERSAMPLE    2
+#else
+ /// Sample rate in Hz.
+ #define AUDDLoopRecDriver_SAMPLERATE        48000
+ /// Number of channels in audio stream.
+ #define AUDDLoopRecDriver_NUMCHANNELS       2
+ /// Number of bytes in one sample.
+ #define AUDDLoopRecDriver_BYTESPERSAMPLE    2
+#endif
+/// Number of bits in one sample.
+#define AUDDLoopRecDriver_BITSPERSAMPLE     (AUDDLoopRecDriver_BYTESPERSAMPLE * 8)
+/// Number of bytes in one USB subframe.
+#define AUDDLoopRecDriver_BYTESPERSUBFRAME  (AUDDLoopRecDriver_NUMCHANNELS * \
+                                             AUDDLoopRecDriver_BYTESPERSAMPLE)
+/// Number of samples in one USB frame.
+#define AUDDLoopRecDriver_SAMPLESPERFRAME   (AUDDLoopRecDriver_SAMPLERATE / 1000 \
+                                             * AUDDLoopRecDriver_NUMCHANNELS)
+/// Number of bytes in one USB frame.
+#define AUDDLoopRecDriver_BYTESPERFRAME     (AUDDLoopRecDriver_SAMPLESPERFRAME * \
+                                             AUDDLoopRecDriver_BYTESPERSAMPLE)
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// \page "Audio Loop Record Channel Numbers"
+///
+/// This page lists codes for USB Audio Loop Record channel numbers.
+///
+/// !Playback channel numbers
+/// - AUDDLoopRecDriver_MASTERCHANNEL
+/// - AUDDLoopRecDriver_LEFTCHANNEL
+/// - AUDDLoopRecDriver_RIGHTCHANNEL
+///
+/// !Record channel number
+/// - AUDDLoopRecDriver_RECCHANNEL
+
+/// Master channel of playback.
+#define AUDDLoopRecDriver_MASTERCHANNEL     0
+/// Front left channel of playback.
+#define AUDDLoopRecDriver_LEFTCHANNEL       1
+/// Front right channel of playback.
+#define AUDDLoopRecDriver_RIGHTCHANNEL      2
+/// Channel of record.
+#define AUDDLoopRecDriver_RECCHANNEL        0
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// Callback function for audio frames.
+/// \param pArg Pointer to transfer arguments.
+/// \param status Frame transfer status.
+/// \return 1 to continue, 0 to stop frames.
+//------------------------------------------------------------------------------
+typedef char (*AUDDFrameTransferCallback)(void* pArg, char status);
+
+//------------------------------------------------------------------------------
+//         Exported functions
+//------------------------------------------------------------------------------
+
+extern void AUDDLoopRecDriver_Initialize();
+
+extern void AUDDLoopRecDriver_RequestHandler(const USBGenericRequest *request);
+
+extern unsigned char AUDDLoopRecDriver_Read(void *buffer,
+                                            unsigned int length,
+                                            TransferCallback callback,
+                                            void *argument);
+
+extern void AUDDLoopRecDriver_SetupWriteMbl(void          * pMultiBufferList,
+                                            unsigned char **pBufferList,
+                                            unsigned short listSize,
+                                            unsigned short frameSize);
+
+extern unsigned char AUDDLoopRecDriver_Write(void         * pMbl,
+                                            unsigned short listSize,
+                                            AUDDFrameTransferCallback callback,
+                                            void *argument);
+
+extern void AUDDLoopRecDriver_RemoteWakeUp(void);
+
+#endif //#ifndef AUDDLoopRecDriver_H
+