path: root/boards/mistralRevB/at91sam9265/AT91SAM9265.h

//  ----------------------------------------------------------------------------
//          ATMEL Microcontroller Software Support  -  ROUSSET  -
//  ----------------------------------------------------------------------------
//  Copyright (c) 2008, Atmel Corporation
// 
//  All rights reserved.
// 
//  Redistribution and use in source and binary forms, with or without
//  modification, are permitted provided that the following conditions are met:
// 
//  - Redistributions of source code must retain the above copyright notice,
//  this list of conditions and the disclaimer below.
// 
//  Atmel's name may not be used to endorse or promote products derived from
//  this software without specific prior written permission. 
//  
//  DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
//  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
//  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
//  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
//  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
//  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
//  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
//  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
//  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
//  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//  ----------------------------------------------------------------------------
// File Name           : AT91SAM9265.h
// Object              : AT91SAM9265 definitions
// Generated           : AT91 SW Application Group  01/23/2009 (11:55:48)
// 
// CVS Reference       : /AT91SAM9265.pl/1.6/Wed Jan 21 10:52:47 2009//
// CVS Reference       : /SYS_SAM9262.pl/1.4/Tue Jan 18 17:06:33 2005//
// CVS Reference       : /HMATRIX1_SAM9262.pl/1.10/Thu Oct 13 12:44:26 2005//
// CVS Reference       : /PMC_SAM9262.pl/1.4/Mon Mar  7 18:03:13 2005//
// CVS Reference       : /HSDRAMC1_6100A.pl/1.2/Mon Aug  9 10:52:25 2004//
// CVS Reference       : /HSMC3_6105A.pl/1.5/Thu Jun  5 15:27:27 2008//
// CVS Reference       : /AIC_6075A.pl/1.1/Mon Jul 12 17:04:01 2004//
// CVS Reference       : /PDC_6074C.pl/1.2/Thu Feb  3 09:02:11 2005//
// CVS Reference       : /DBGU_6059D.pl/1.1/Mon Jan 31 13:54:41 2005//
// CVS Reference       : /PIO_6057A.pl/1.2/Thu Feb  3 10:29:42 2005//
// CVS Reference       : /RSTC_6098A.pl/1.4/Fri Oct 17 13:27:55 2008//
// CVS Reference       : /SHDWC_6122A.pl/1.3/Wed Oct  6 14:16:58 2004//
// CVS Reference       : /RTTC_6081A.pl/1.2/Thu Nov  4 13:57:22 2004//
// CVS Reference       : /PITC_6079A.pl/1.2/Thu Nov  4 13:56:22 2004//
// CVS Reference       : /WDTC_6080A.pl/1.3/Thu Nov  4 13:58:52 2004//
// CVS Reference       : /TC_6082A.pl/1.8/Fri Oct 17 13:27:58 2008//
// CVS Reference       : /MCI_6101E.pl/1.2/Thu Jan 22 10:02:48 2009//
// CVS Reference       : /TWI_6061B.pl/1.3/Fri Oct 17 13:27:59 2008//
// CVS Reference       : /US_6089C.pl/1.1/Mon Jan 31 13:56:02 2005//
// CVS Reference       : /SSC_6078A.pl/1.1/Tue Jul 13 07:10:41 2004//
// CVS Reference       : /SPI_6088D.pl/1.3/Fri May 20 14:23:02 2005//
// CVS Reference       : /AC97C_XXXX.pl/1.3/Tue Feb 22 17:08:27 2005//
// CVS Reference       : /CAN_6019B.pl/1.1/Mon Jan 31 13:54:30 2005//
// CVS Reference       : /PWM_6044D.pl/1.2/Tue May 10 12:39:09 2005//
// CVS Reference       : /LCDC_6063A.pl/1.6/Tue Jan 20 16:29:59 2009//
// CVS Reference       : /EMACB_6119A.pl/1.6/Wed Jul 13 15:25:00 2005//
// CVS Reference       : /GPS_XXXX.pl/1.8/Mon Apr  4 07:07:48 2005//
// CVS Reference       : /DMA_XXXX.pl/1.6/Tue Jan 11 09:40:44 2005//
// CVS Reference       : /OTG_XXXX.pl/1.11/Wed Jan 21 10:54:21 2009//
// CVS Reference       : /UDPHS_SAM9265.pl/1.10/Tue Jun 24 13:05:14 2008//
// CVS Reference       : /UHP_6127A.pl/1.1/Wed Jan 21 10:53:45 2009//
// CVS Reference       : /TBOX_XXXX.pl/1.15/Thu Jun  9 07:05:57 2005//
// CVS Reference       : /EBI_nadia2.pl/1.1/Wed Dec 29 11:28:03 2004//
// CVS Reference       : /AES_6149A.pl/1.12/Wed Nov  2 14:17:53 2005//
// CVS Reference       : /HECC_6143A.pl/1.1/Wed Feb  9 17:16:57 2005//
// CVS Reference       : /ISI_xxxxx.pl/1.6/Mon Sep  1 14:41:33 2008//
//  ----------------------------------------------------------------------------

#ifndef AT91SAM9265_H
#define AT91SAM9265_H

#ifndef __ASSEMBLY__
typedef volatile unsigned int AT91_REG;// Hardware register definition
#define AT91_CAST(a) (a)
#else
#define AT91_CAST(a)
#endif

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR System Peripherals
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_SYS {
	AT91_REG	 SYS_ECC0; 	// ECC 0
	AT91_REG	 Reserved0[127]; 	// 
	AT91_REG	 SYS_SDRAMC0_MR; 	// SDRAM Controller Mode Register
	AT91_REG	 SYS_SDRAMC0_TR; 	// SDRAM Controller Refresh Timer Register
	AT91_REG	 SYS_SDRAMC0_CR; 	// SDRAM Controller Configuration Register
	AT91_REG	 SYS_SDRAMC0_HSR; 	// SDRAM Controller High Speed Register
	AT91_REG	 SYS_SDRAMC0_LPR; 	// SDRAM Controller Low Power Register
	AT91_REG	 SYS_SDRAMC0_IER; 	// SDRAM Controller Interrupt Enable Register
	AT91_REG	 SYS_SDRAMC0_IDR; 	// SDRAM Controller Interrupt Disable Register
	AT91_REG	 SYS_SDRAMC0_IMR; 	// SDRAM Controller Interrupt Mask Register
	AT91_REG	 SYS_SDRAMC0_ISR; 	// SDRAM Controller Interrupt Mask Register
	AT91_REG	 SYS_SDRAMC0_MDR; 	// SDRAM Memory Device Register
	AT91_REG	 Reserved1[118]; 	// 
	AT91_REG	 SYS_SMC0_SETUP0; 	//  Setup Register for CS 0
	AT91_REG	 SYS_SMC0_PULSE0; 	//  Pulse Register for CS 0
	AT91_REG	 SYS_SMC0_CYCLE0; 	//  Cycle Register for CS 0
	AT91_REG	 SYS_SMC0_CTRL0; 	//  Control Register for CS 0
	AT91_REG	 SYS_SMC0_SETUP1; 	//  Setup Register for CS 1
	AT91_REG	 SYS_SMC0_PULSE1; 	//  Pulse Register for CS 1
	AT91_REG	 SYS_SMC0_CYCLE1; 	//  Cycle Register for CS 1
	AT91_REG	 SYS_SMC0_CTRL1; 	//  Control Register for CS 1
	AT91_REG	 SYS_SMC0_SETUP2; 	//  Setup Register for CS 2
	AT91_REG	 SYS_SMC0_PULSE2; 	//  Pulse Register for CS 2
	AT91_REG	 SYS_SMC0_CYCLE2; 	//  Cycle Register for CS 2
	AT91_REG	 SYS_SMC0_CTRL2; 	//  Control Register for CS 2
	AT91_REG	 SYS_SMC0_SETUP3; 	//  Setup Register for CS 3
	AT91_REG	 SYS_SMC0_PULSE3; 	//  Pulse Register for CS 3
	AT91_REG	 SYS_SMC0_CYCLE3; 	//  Cycle Register for CS 3
	AT91_REG	 SYS_SMC0_CTRL3; 	//  Control Register for CS 3
	AT91_REG	 SYS_SMC0_SETUP4; 	//  Setup Register for CS 4
	AT91_REG	 SYS_SMC0_PULSE4; 	//  Pulse Register for CS 4
	AT91_REG	 SYS_SMC0_CYCLE4; 	//  Cycle Register for CS 4
	AT91_REG	 SYS_SMC0_CTRL4; 	//  Control Register for CS 4
	AT91_REG	 SYS_SMC0_SETUP5; 	//  Setup Register for CS 5
	AT91_REG	 SYS_SMC0_PULSE5; 	//  Pulse Register for CS 5
	AT91_REG	 SYS_SMC0_CYCLE5; 	//  Cycle Register for CS 5
	AT91_REG	 SYS_SMC0_CTRL5; 	//  Control Register for CS 5
	AT91_REG	 SYS_SMC0_SETUP6; 	//  Setup Register for CS 6
	AT91_REG	 SYS_SMC0_PULSE6; 	//  Pulse Register for CS 6
	AT91_REG	 SYS_SMC0_CYCLE6; 	//  Cycle Register for CS 6
	AT91_REG	 SYS_SMC0_CTRL6; 	//  Control Register for CS 6
	AT91_REG	 SYS_SMC0_SETUP7; 	//  Setup Register for CS 7
	AT91_REG	 SYS_SMC0_PULSE7; 	//  Pulse Register for CS 7
	AT91_REG	 SYS_SMC0_CYCLE7; 	//  Cycle Register for CS 7
	AT91_REG	 SYS_SMC0_CTRL7; 	//  Control Register for CS 7
	AT91_REG	 Reserved2[96]; 	// 
	AT91_REG	 SYS_ECC1; 	// ECC 0
	AT91_REG	 Reserved3[127]; 	// 
	AT91_REG	 SYS_SDRAMC1_MR; 	// SDRAM Controller Mode Register
	AT91_REG	 SYS_SDRAMC1_TR; 	// SDRAM Controller Refresh Timer Register
	AT91_REG	 SYS_SDRAMC1_CR; 	// SDRAM Controller Configuration Register
	AT91_REG	 SYS_SDRAMC1_HSR; 	// SDRAM Controller High Speed Register
	AT91_REG	 SYS_SDRAMC1_LPR; 	// SDRAM Controller Low Power Register
	AT91_REG	 SYS_SDRAMC1_IER; 	// SDRAM Controller Interrupt Enable Register
	AT91_REG	 SYS_SDRAMC1_IDR; 	// SDRAM Controller Interrupt Disable Register
	AT91_REG	 SYS_SDRAMC1_IMR; 	// SDRAM Controller Interrupt Mask Register
	AT91_REG	 SYS_SDRAMC1_ISR; 	// SDRAM Controller Interrupt Mask Register
	AT91_REG	 SYS_SDRAMC1_MDR; 	// SDRAM Memory Device Register
	AT91_REG	 Reserved4[118]; 	// 
	AT91_REG	 SYS_SMC1_SETUP0; 	//  Setup Register for CS 0
	AT91_REG	 SYS_SMC1_PULSE0; 	//  Pulse Register for CS 0
	AT91_REG	 SYS_SMC1_CYCLE0; 	//  Cycle Register for CS 0
	AT91_REG	 SYS_SMC1_CTRL0; 	//  Control Register for CS 0
	AT91_REG	 SYS_SMC1_SETUP1; 	//  Setup Register for CS 1
	AT91_REG	 SYS_SMC1_PULSE1; 	//  Pulse Register for CS 1
	AT91_REG	 SYS_SMC1_CYCLE1; 	//  Cycle Register for CS 1
	AT91_REG	 SYS_SMC1_CTRL1; 	//  Control Register for CS 1
	AT91_REG	 SYS_SMC1_SETUP2; 	//  Setup Register for CS 2
	AT91_REG	 SYS_SMC1_PULSE2; 	//  Pulse Register for CS 2
	AT91_REG	 SYS_SMC1_CYCLE2; 	//  Cycle Register for CS 2
	AT91_REG	 SYS_SMC1_CTRL2; 	//  Control Register for CS 2
	AT91_REG	 SYS_SMC1_SETUP3; 	//  Setup Register for CS 3
	AT91_REG	 SYS_SMC1_PULSE3; 	//  Pulse Register for CS 3
	AT91_REG	 SYS_SMC1_CYCLE3; 	//  Cycle Register for CS 3
	AT91_REG	 SYS_SMC1_CTRL3; 	//  Control Register for CS 3
	AT91_REG	 SYS_SMC1_SETUP4; 	//  Setup Register for CS 4
	AT91_REG	 SYS_SMC1_PULSE4; 	//  Pulse Register for CS 4
	AT91_REG	 SYS_SMC1_CYCLE4; 	//  Cycle Register for CS 4
	AT91_REG	 SYS_SMC1_CTRL4; 	//  Control Register for CS 4
	AT91_REG	 SYS_SMC1_SETUP5; 	//  Setup Register for CS 5
	AT91_REG	 SYS_SMC1_PULSE5; 	//  Pulse Register for CS 5
	AT91_REG	 SYS_SMC1_CYCLE5; 	//  Cycle Register for CS 5
	AT91_REG	 SYS_SMC1_CTRL5; 	//  Control Register for CS 5
	AT91_REG	 SYS_SMC1_SETUP6; 	//  Setup Register for CS 6
	AT91_REG	 SYS_SMC1_PULSE6; 	//  Pulse Register for CS 6
	AT91_REG	 SYS_SMC1_CYCLE6; 	//  Cycle Register for CS 6
	AT91_REG	 SYS_SMC1_CTRL6; 	//  Control Register for CS 6
	AT91_REG	 SYS_SMC1_SETUP7; 	//  Setup Register for CS 7
	AT91_REG	 SYS_SMC1_PULSE7; 	//  Pulse Register for CS 7
	AT91_REG	 SYS_SMC1_CYCLE7; 	//  Cycle Register for CS 7
	AT91_REG	 SYS_SMC1_CTRL7; 	//  Control Register for CS 7
	AT91_REG	 Reserved5[96]; 	// 
	AT91_REG	 SYS_MATRIX_MCFG0; 	//  Master Configuration Register 0 
	AT91_REG	 SYS_MATRIX_MCFG1; 	//  Master Configuration Register 1 
	AT91_REG	 SYS_MATRIX_MCFG2; 	//  Master Configuration Register 2 
	AT91_REG	 SYS_MATRIX_MCFG3; 	//  Master Configuration Register 3 
	AT91_REG	 SYS_MATRIX_MCFG4; 	//  Master Configuration Register 4 
	AT91_REG	 SYS_MATRIX_MCFG5; 	//  Master Configuration Register 5 
	AT91_REG	 SYS_MATRIX_MCFG6; 	//  Master Configuration Register 6 
	AT91_REG	 SYS_MATRIX_MCFG7; 	//  Master Configuration Register 7 
	AT91_REG	 SYS_MATRIX_MCFG8; 	//  Master Configuration Register 8 
	AT91_REG	 Reserved6[7]; 	// 
	AT91_REG	 SYS_MATRIX_SCFG0; 	//  Slave Configuration Register 0
	AT91_REG	 SYS_MATRIX_SCFG1; 	//  Slave Configuration Register 1
	AT91_REG	 SYS_MATRIX_SCFG2; 	//  Slave Configuration Register 2
	AT91_REG	 SYS_MATRIX_SCFG3; 	//  Slave Configuration Register 3
	AT91_REG	 SYS_MATRIX_SCFG4; 	//  Slave Configuration Register 4
	AT91_REG	 SYS_MATRIX_SCFG5; 	//  Slave Configuration Register 5
	AT91_REG	 SYS_MATRIX_SCFG6; 	//  Slave Configuration Register 6
	AT91_REG	 SYS_MATRIX_SCFG7; 	//  Slave Configuration Register 7
	AT91_REG	 Reserved7[8]; 	// 
	AT91_REG	 SYS_MATRIX_PRAS0; 	//  PRAS0
	AT91_REG	 SYS_MATRIX_PRBS0; 	//  PRBS0
	AT91_REG	 SYS_MATRIX_PRAS1; 	//  PRAS1
	AT91_REG	 SYS_MATRIX_PRBS1; 	//  PRBS1
	AT91_REG	 SYS_MATRIX_PRAS2; 	//  PRAS2
	AT91_REG	 SYS_MATRIX_PRBS2; 	//  PRBS2
	AT91_REG	 SYS_MATRIX_PRAS3; 	//  PRAS3
	AT91_REG	 SYS_MATRIX_PRBS3; 	//  PRBS3
	AT91_REG	 SYS_MATRIX_PRAS4; 	//  PRAS4
	AT91_REG	 SYS_MATRIX_PRBS4; 	//  PRBS4
	AT91_REG	 SYS_MATRIX_PRAS5; 	//  PRAS5
	AT91_REG	 SYS_MATRIX_PRBS5; 	//  PRBS5
	AT91_REG	 SYS_MATRIX_PRAS6; 	//  PRAS6
	AT91_REG	 SYS_MATRIX_PRBS6; 	//  PRBS6
	AT91_REG	 SYS_MATRIX_PRAS7; 	//  PRAS7
	AT91_REG	 SYS_MATRIX_PRBS7; 	//  PRBS7
	AT91_REG	 Reserved8[16]; 	// 
	AT91_REG	 SYS_MATRIX_MRCR; 	//  Master Remp Control Register 
	AT91_REG	 Reserved9[63]; 	// 
	AT91_REG	 SYS_DBGU_CR; 	// Control Register
	AT91_REG	 SYS_DBGU_MR; 	// Mode Register
	AT91_REG	 SYS_DBGU_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_DBGU_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_DBGU_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_DBGU_CSR; 	// Channel Status Register
	AT91_REG	 SYS_DBGU_RHR; 	// Receiver Holding Register
	AT91_REG	 SYS_DBGU_THR; 	// Transmitter Holding Register
	AT91_REG	 SYS_DBGU_BRGR; 	// Baud Rate Generator Register
	AT91_REG	 Reserved10[7]; 	// 
	AT91_REG	 SYS_DBGU_CIDR; 	// Chip ID Register
	AT91_REG	 SYS_DBGU_EXID; 	// Chip ID Extension Register
	AT91_REG	 SYS_DBGU_FNTR; 	// Force NTRST Register
	AT91_REG	 Reserved11[45]; 	// 
	AT91_REG	 SYS_DBGU_RPR; 	// Receive Pointer Register
	AT91_REG	 SYS_DBGU_RCR; 	// Receive Counter Register
	AT91_REG	 SYS_DBGU_TPR; 	// Transmit Pointer Register
	AT91_REG	 SYS_DBGU_TCR; 	// Transmit Counter Register
	AT91_REG	 SYS_DBGU_RNPR; 	// Receive Next Pointer Register
	AT91_REG	 SYS_DBGU_RNCR; 	// Receive Next Counter Register
	AT91_REG	 SYS_DBGU_TNPR; 	// Transmit Next Pointer Register
	AT91_REG	 SYS_DBGU_TNCR; 	// Transmit Next Counter Register
	AT91_REG	 SYS_DBGU_PTCR; 	// PDC Transfer Control Register
	AT91_REG	 SYS_DBGU_PTSR; 	// PDC Transfer Status Register
	AT91_REG	 Reserved12[54]; 	// 
	AT91_REG	 SYS_AIC_SMR[32]; 	// Source Mode Register
	AT91_REG	 SYS_AIC_SVR[32]; 	// Source Vector Register
	AT91_REG	 SYS_AIC_IVR; 	// IRQ Vector Register
	AT91_REG	 SYS_AIC_FVR; 	// FIQ Vector Register
	AT91_REG	 SYS_AIC_ISR; 	// Interrupt Status Register
	AT91_REG	 SYS_AIC_IPR; 	// Interrupt Pending Register
	AT91_REG	 SYS_AIC_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_AIC_CISR; 	// Core Interrupt Status Register
	AT91_REG	 Reserved13[2]; 	// 
	AT91_REG	 SYS_AIC_IECR; 	// Interrupt Enable Command Register
	AT91_REG	 SYS_AIC_IDCR; 	// Interrupt Disable Command Register
	AT91_REG	 SYS_AIC_ICCR; 	// Interrupt Clear Command Register
	AT91_REG	 SYS_AIC_ISCR; 	// Interrupt Set Command Register
	AT91_REG	 SYS_AIC_EOICR; 	// End of Interrupt Command Register
	AT91_REG	 SYS_AIC_SPU; 	// Spurious Vector Register
	AT91_REG	 SYS_AIC_DCR; 	// Debug Control Register (Protect)
	AT91_REG	 Reserved14[1]; 	// 
	AT91_REG	 SYS_AIC_FFER; 	// Fast Forcing Enable Register
	AT91_REG	 SYS_AIC_FFDR; 	// Fast Forcing Disable Register
	AT91_REG	 SYS_AIC_FFSR; 	// Fast Forcing Status Register
	AT91_REG	 Reserved15[45]; 	// 
	AT91_REG	 SYS_PIOA_PER; 	// PIO Enable Register
	AT91_REG	 SYS_PIOA_PDR; 	// PIO Disable Register
	AT91_REG	 SYS_PIOA_PSR; 	// PIO Status Register
	AT91_REG	 Reserved16[1]; 	// 
	AT91_REG	 SYS_PIOA_OER; 	// Output Enable Register
	AT91_REG	 SYS_PIOA_ODR; 	// Output Disable Registerr
	AT91_REG	 SYS_PIOA_OSR; 	// Output Status Register
	AT91_REG	 Reserved17[1]; 	// 
	AT91_REG	 SYS_PIOA_IFER; 	// Input Filter Enable Register
	AT91_REG	 SYS_PIOA_IFDR; 	// Input Filter Disable Register
	AT91_REG	 SYS_PIOA_IFSR; 	// Input Filter Status Register
	AT91_REG	 Reserved18[1]; 	// 
	AT91_REG	 SYS_PIOA_SODR; 	// Set Output Data Register
	AT91_REG	 SYS_PIOA_CODR; 	// Clear Output Data Register
	AT91_REG	 SYS_PIOA_ODSR; 	// Output Data Status Register
	AT91_REG	 SYS_PIOA_PDSR; 	// Pin Data Status Register
	AT91_REG	 SYS_PIOA_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_PIOA_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_PIOA_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_PIOA_ISR; 	// Interrupt Status Register
	AT91_REG	 SYS_PIOA_MDER; 	// Multi-driver Enable Register
	AT91_REG	 SYS_PIOA_MDDR; 	// Multi-driver Disable Register
	AT91_REG	 SYS_PIOA_MDSR; 	// Multi-driver Status Register
	AT91_REG	 Reserved19[1]; 	// 
	AT91_REG	 SYS_PIOA_PPUDR; 	// Pull-up Disable Register
	AT91_REG	 SYS_PIOA_PPUER; 	// Pull-up Enable Register
	AT91_REG	 SYS_PIOA_PPUSR; 	// Pull-up Status Register
	AT91_REG	 Reserved20[1]; 	// 
	AT91_REG	 SYS_PIOA_ASR; 	// Select A Register
	AT91_REG	 SYS_PIOA_BSR; 	// Select B Register
	AT91_REG	 SYS_PIOA_ABSR; 	// AB Select Status Register
	AT91_REG	 Reserved21[9]; 	// 
	AT91_REG	 SYS_PIOA_OWER; 	// Output Write Enable Register
	AT91_REG	 SYS_PIOA_OWDR; 	// Output Write Disable Register
	AT91_REG	 SYS_PIOA_OWSR; 	// Output Write Status Register
	AT91_REG	 Reserved22[85]; 	// 
	AT91_REG	 SYS_PIOB_PER; 	// PIO Enable Register
	AT91_REG	 SYS_PIOB_PDR; 	// PIO Disable Register
	AT91_REG	 SYS_PIOB_PSR; 	// PIO Status Register
	AT91_REG	 Reserved23[1]; 	// 
	AT91_REG	 SYS_PIOB_OER; 	// Output Enable Register
	AT91_REG	 SYS_PIOB_ODR; 	// Output Disable Registerr
	AT91_REG	 SYS_PIOB_OSR; 	// Output Status Register
	AT91_REG	 Reserved24[1]; 	// 
	AT91_REG	 SYS_PIOB_IFER; 	// Input Filter Enable Register
	AT91_REG	 SYS_PIOB_IFDR; 	// Input Filter Disable Register
	AT91_REG	 SYS_PIOB_IFSR; 	// Input Filter Status Register
	AT91_REG	 Reserved25[1]; 	// 
	AT91_REG	 SYS_PIOB_SODR; 	// Set Output Data Register
	AT91_REG	 SYS_PIOB_CODR; 	// Clear Output Data Register
	AT91_REG	 SYS_PIOB_ODSR; 	// Output Data Status Register
	AT91_REG	 SYS_PIOB_PDSR; 	// Pin Data Status Register
	AT91_REG	 SYS_PIOB_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_PIOB_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_PIOB_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_PIOB_ISR; 	// Interrupt Status Register
	AT91_REG	 SYS_PIOB_MDER; 	// Multi-driver Enable Register
	AT91_REG	 SYS_PIOB_MDDR; 	// Multi-driver Disable Register
	AT91_REG	 SYS_PIOB_MDSR; 	// Multi-driver Status Register
	AT91_REG	 Reserved26[1]; 	// 
	AT91_REG	 SYS_PIOB_PPUDR; 	// Pull-up Disable Register
	AT91_REG	 SYS_PIOB_PPUER; 	// Pull-up Enable Register
	AT91_REG	 SYS_PIOB_PPUSR; 	// Pull-up Status Register
	AT91_REG	 Reserved27[1]; 	// 
	AT91_REG	 SYS_PIOB_ASR; 	// Select A Register
	AT91_REG	 SYS_PIOB_BSR; 	// Select B Register
	AT91_REG	 SYS_PIOB_ABSR; 	// AB Select Status Register
	AT91_REG	 Reserved28[9]; 	// 
	AT91_REG	 SYS_PIOB_OWER; 	// Output Write Enable Register
	AT91_REG	 SYS_PIOB_OWDR; 	// Output Write Disable Register
	AT91_REG	 SYS_PIOB_OWSR; 	// Output Write Status Register
	AT91_REG	 Reserved29[85]; 	// 
	AT91_REG	 SYS_PIOC_PER; 	// PIO Enable Register
	AT91_REG	 SYS_PIOC_PDR; 	// PIO Disable Register
	AT91_REG	 SYS_PIOC_PSR; 	// PIO Status Register
	AT91_REG	 Reserved30[1]; 	// 
	AT91_REG	 SYS_PIOC_OER; 	// Output Enable Register
	AT91_REG	 SYS_PIOC_ODR; 	// Output Disable Registerr
	AT91_REG	 SYS_PIOC_OSR; 	// Output Status Register
	AT91_REG	 Reserved31[1]; 	// 
	AT91_REG	 SYS_PIOC_IFER; 	// Input Filter Enable Register
	AT91_REG	 SYS_PIOC_IFDR; 	// Input Filter Disable Register
	AT91_REG	 SYS_PIOC_IFSR; 	// Input Filter Status Register
	AT91_REG	 Reserved32[1]; 	// 
	AT91_REG	 SYS_PIOC_SODR; 	// Set Output Data Register
	AT91_REG	 SYS_PIOC_CODR; 	// Clear Output Data Register
	AT91_REG	 SYS_PIOC_ODSR; 	// Output Data Status Register
	AT91_REG	 SYS_PIOC_PDSR; 	// Pin Data Status Register
	AT91_REG	 SYS_PIOC_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_PIOC_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_PIOC_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_PIOC_ISR; 	// Interrupt Status Register
	AT91_REG	 SYS_PIOC_MDER; 	// Multi-driver Enable Register
	AT91_REG	 SYS_PIOC_MDDR; 	// Multi-driver Disable Register
	AT91_REG	 SYS_PIOC_MDSR; 	// Multi-driver Status Register
	AT91_REG	 Reserved33[1]; 	// 
	AT91_REG	 SYS_PIOC_PPUDR; 	// Pull-up Disable Register
	AT91_REG	 SYS_PIOC_PPUER; 	// Pull-up Enable Register
	AT91_REG	 SYS_PIOC_PPUSR; 	// Pull-up Status Register
	AT91_REG	 Reserved34[1]; 	// 
	AT91_REG	 SYS_PIOC_ASR; 	// Select A Register
	AT91_REG	 SYS_PIOC_BSR; 	// Select B Register
	AT91_REG	 SYS_PIOC_ABSR; 	// AB Select Status Register
	AT91_REG	 Reserved35[9]; 	// 
	AT91_REG	 SYS_PIOC_OWER; 	// Output Write Enable Register
	AT91_REG	 SYS_PIOC_OWDR; 	// Output Write Disable Register
	AT91_REG	 SYS_PIOC_OWSR; 	// Output Write Status Register
	AT91_REG	 Reserved36[85]; 	// 
	AT91_REG	 SYS_PIOD_PER; 	// PIO Enable Register
	AT91_REG	 SYS_PIOD_PDR; 	// PIO Disable Register
	AT91_REG	 SYS_PIOD_PSR; 	// PIO Status Register
	AT91_REG	 Reserved37[1]; 	// 
	AT91_REG	 SYS_PIOD_OER; 	// Output Enable Register
	AT91_REG	 SYS_PIOD_ODR; 	// Output Disable Registerr
	AT91_REG	 SYS_PIOD_OSR; 	// Output Status Register
	AT91_REG	 Reserved38[1]; 	// 
	AT91_REG	 SYS_PIOD_IFER; 	// Input Filter Enable Register
	AT91_REG	 SYS_PIOD_IFDR; 	// Input Filter Disable Register
	AT91_REG	 SYS_PIOD_IFSR; 	// Input Filter Status Register
	AT91_REG	 Reserved39[1]; 	// 
	AT91_REG	 SYS_PIOD_SODR; 	// Set Output Data Register
	AT91_REG	 SYS_PIOD_CODR; 	// Clear Output Data Register
	AT91_REG	 SYS_PIOD_ODSR; 	// Output Data Status Register
	AT91_REG	 SYS_PIOD_PDSR; 	// Pin Data Status Register
	AT91_REG	 SYS_PIOD_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_PIOD_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_PIOD_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_PIOD_ISR; 	// Interrupt Status Register
	AT91_REG	 SYS_PIOD_MDER; 	// Multi-driver Enable Register
	AT91_REG	 SYS_PIOD_MDDR; 	// Multi-driver Disable Register
	AT91_REG	 SYS_PIOD_MDSR; 	// Multi-driver Status Register
	AT91_REG	 Reserved40[1]; 	// 
	AT91_REG	 SYS_PIOD_PPUDR; 	// Pull-up Disable Register
	AT91_REG	 SYS_PIOD_PPUER; 	// Pull-up Enable Register
	AT91_REG	 SYS_PIOD_PPUSR; 	// Pull-up Status Register
	AT91_REG	 Reserved41[1]; 	// 
	AT91_REG	 SYS_PIOD_ASR; 	// Select A Register
	AT91_REG	 SYS_PIOD_BSR; 	// Select B Register
	AT91_REG	 SYS_PIOD_ABSR; 	// AB Select Status Register
	AT91_REG	 Reserved42[9]; 	// 
	AT91_REG	 SYS_PIOD_OWER; 	// Output Write Enable Register
	AT91_REG	 SYS_PIOD_OWDR; 	// Output Write Disable Register
	AT91_REG	 SYS_PIOD_OWSR; 	// Output Write Status Register
	AT91_REG	 Reserved43[85]; 	// 
	AT91_REG	 SYS_PIOE_PER; 	// PIO Enable Register
	AT91_REG	 SYS_PIOE_PDR; 	// PIO Disable Register
	AT91_REG	 SYS_PIOE_PSR; 	// PIO Status Register
	AT91_REG	 Reserved44[1]; 	// 
	AT91_REG	 SYS_PIOE_OER; 	// Output Enable Register
	AT91_REG	 SYS_PIOE_ODR; 	// Output Disable Registerr
	AT91_REG	 SYS_PIOE_OSR; 	// Output Status Register
	AT91_REG	 Reserved45[1]; 	// 
	AT91_REG	 SYS_PIOE_IFER; 	// Input Filter Enable Register
	AT91_REG	 SYS_PIOE_IFDR; 	// Input Filter Disable Register
	AT91_REG	 SYS_PIOE_IFSR; 	// Input Filter Status Register
	AT91_REG	 Reserved46[1]; 	// 
	AT91_REG	 SYS_PIOE_SODR; 	// Set Output Data Register
	AT91_REG	 SYS_PIOE_CODR; 	// Clear Output Data Register
	AT91_REG	 SYS_PIOE_ODSR; 	// Output Data Status Register
	AT91_REG	 SYS_PIOE_PDSR; 	// Pin Data Status Register
	AT91_REG	 SYS_PIOE_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_PIOE_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_PIOE_IMR; 	// Interrupt Mask Register
	AT91_REG	 SYS_PIOE_ISR; 	// Interrupt Status Register
	AT91_REG	 SYS_PIOE_MDER; 	// Multi-driver Enable Register
	AT91_REG	 SYS_PIOE_MDDR; 	// Multi-driver Disable Register
	AT91_REG	 SYS_PIOE_MDSR; 	// Multi-driver Status Register
	AT91_REG	 Reserved47[1]; 	// 
	AT91_REG	 SYS_PIOE_PPUDR; 	// Pull-up Disable Register
	AT91_REG	 SYS_PIOE_PPUER; 	// Pull-up Enable Register
	AT91_REG	 SYS_PIOE_PPUSR; 	// Pull-up Status Register
	AT91_REG	 Reserved48[1]; 	// 
	AT91_REG	 SYS_PIOE_ASR; 	// Select A Register
	AT91_REG	 SYS_PIOE_BSR; 	// Select B Register
	AT91_REG	 SYS_PIOE_ABSR; 	// AB Select Status Register
	AT91_REG	 Reserved49[9]; 	// 
	AT91_REG	 SYS_PIOE_OWER; 	// Output Write Enable Register
	AT91_REG	 SYS_PIOE_OWDR; 	// Output Write Disable Register
	AT91_REG	 SYS_PIOE_OWSR; 	// Output Write Status Register
	AT91_REG	 Reserved50[85]; 	// 
	AT91_REG	 SYS_PMC_SCER; 	// System Clock Enable Register
	AT91_REG	 SYS_PMC_SCDR; 	// System Clock Disable Register
	AT91_REG	 SYS_PMC_SCSR; 	// System Clock Status Register
	AT91_REG	 Reserved51[1]; 	// 
	AT91_REG	 SYS_PMC_PCER; 	// Peripheral Clock Enable Register
	AT91_REG	 SYS_PMC_PCDR; 	// Peripheral Clock Disable Register
	AT91_REG	 SYS_PMC_PCSR; 	// Peripheral Clock Status Register
	AT91_REG	 Reserved52[1]; 	// 
	AT91_REG	 SYS_PMC_MOR; 	// Main Oscillator Register
	AT91_REG	 SYS_PMC_MCFR; 	// Main Clock  Frequency Register
	AT91_REG	 SYS_PMC_PLLAR; 	// PLL A Register
	AT91_REG	 SYS_PMC_PLLBR; 	// PLL B Register
	AT91_REG	 SYS_PMC_MCKR; 	// Master Clock Register
	AT91_REG	 Reserved53[3]; 	// 
	AT91_REG	 SYS_PMC_PCKR[8]; 	// Programmable Clock Register
	AT91_REG	 SYS_PMC_IER; 	// Interrupt Enable Register
	AT91_REG	 SYS_PMC_IDR; 	// Interrupt Disable Register
	AT91_REG	 SYS_PMC_SR; 	// Status Register
	AT91_REG	 SYS_PMC_IMR; 	// Interrupt Mask Register
	AT91_REG	 Reserved54[36]; 	// 
	AT91_REG	 SYS_RSTC_RCR; 	// Reset Control Register
	AT91_REG	 SYS_RSTC_RSR; 	// Reset Status Register
	AT91_REG	 SYS_RSTC_RMR; 	// Reset Mode Register
	AT91_REG	 Reserved55[1]; 	// 
	AT91_REG	 SYS_SHDWC_SHCR; 	// Shut Down Control Register
	AT91_REG	 SYS_SHDWC_SHMR; 	// Shut Down Mode Register
	AT91_REG	 SYS_SHDWC_SHSR; 	// Shut Down Status Register
	AT91_REG	 Reserved56[1]; 	// 
	AT91_REG	 SYS_RTTC0_RTMR; 	// Real-time Mode Register
	AT91_REG	 SYS_RTTC0_RTAR; 	// Real-time Alarm Register
	AT91_REG	 SYS_RTTC0_RTVR; 	// Real-time Value Register
	AT91_REG	 SYS_RTTC0_RTSR; 	// Real-time Status Register
	AT91_REG	 SYS_PITC_PIMR; 	// Period Interval Mode Register
	AT91_REG	 SYS_PITC_PISR; 	// Period Interval Status Register
	AT91_REG	 SYS_PITC_PIVR; 	// Period Interval Value Register
	AT91_REG	 SYS_PITC_PIIR; 	// Period Interval Image Register
	AT91_REG	 SYS_WDTC_WDCR; 	// Watchdog Control Register
	AT91_REG	 SYS_WDTC_WDMR; 	// Watchdog Mode Register
	AT91_REG	 SYS_WDTC_WDSR; 	// Watchdog Status Register
	AT91_REG	 Reserved57[1]; 	// 
	AT91_REG	 SYS_RTTC1_RTMR; 	// Real-time Mode Register
	AT91_REG	 SYS_RTTC1_RTAR; 	// Real-time Alarm Register
	AT91_REG	 SYS_RTTC1_RTVR; 	// Real-time Value Register
	AT91_REG	 SYS_RTTC1_RTSR; 	// Real-time Status Register
	AT91_REG	 SYS_GPBR[20]; 	// General Purpose Register
	AT91_REG	 Reserved58[19]; 	// 
	AT91_REG	 SYS_RSTC_VER; 	// Version Register
} AT91S_SYS, *AT91PS_SYS;
#else
#define ECC0            (AT91_CAST(AT91_REG *) 	0x00000000) // (ECC0) ECC 0
#define ECC1            (AT91_CAST(AT91_REG *) 	0x00000600) // (ECC1) ECC 0
#define GPBR            (AT91_CAST(AT91_REG *) 	0x00001D60) // (GPBR) General Purpose Register

#endif
// -------- GPBR : (SYS Offset: 0x1d60) GPBR General Purpose Register -------- 
#define AT91C_GPBR_GPRV       (0x0 <<  0) // (SYS) General Purpose Register Value

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR External Bus Interface 0
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_EBI0 {
	AT91_REG	 EBI0_DUMMY; 	// Dummy register - Do not use
} AT91S_EBI0, *AT91PS_EBI0;
#else
#define EBI0_DUMMY      (AT91_CAST(AT91_REG *) 	0x00000000) // (EBI0_DUMMY) Dummy register - Do not use

#endif

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR SDRAM Controller Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_SDRAMC {
	AT91_REG	 SDRAMC_MR; 	// SDRAM Controller Mode Register
	AT91_REG	 SDRAMC_TR; 	// SDRAM Controller Refresh Timer Register
	AT91_REG	 SDRAMC_CR; 	// SDRAM Controller Configuration Register
	AT91_REG	 SDRAMC_HSR; 	// SDRAM Controller High Speed Register
	AT91_REG	 SDRAMC_LPR; 	// SDRAM Controller Low Power Register
	AT91_REG	 SDRAMC_IER; 	// SDRAM Controller Interrupt Enable Register
	AT91_REG	 SDRAMC_IDR; 	// SDRAM Controller Interrupt Disable Register
	AT91_REG	 SDRAMC_IMR; 	// SDRAM Controller Interrupt Mask Register
	AT91_REG	 SDRAMC_ISR; 	// SDRAM Controller Interrupt Mask Register
	AT91_REG	 SDRAMC_MDR; 	// SDRAM Memory Device Register
} AT91S_SDRAMC, *AT91PS_SDRAMC;
#else
#define SDRAMC_MR       (AT91_CAST(AT91_REG *) 	0x00000000) // (SDRAMC_MR) SDRAM Controller Mode Register
#define SDRAMC_TR       (AT91_CAST(AT91_REG *) 	0x00000004) // (SDRAMC_TR) SDRAM Controller Refresh Timer Register
#define SDRAMC_CR       (AT91_CAST(AT91_REG *) 	0x00000008) // (SDRAMC_CR) SDRAM Controller Configuration Register
#define SDRAMC_HSR      (AT91_CAST(AT91_REG *) 	0x0000000C) // (SDRAMC_HSR) SDRAM Controller High Speed Register
#define SDRAMC_LPR      (AT91_CAST(AT91_REG *) 	0x00000010) // (SDRAMC_LPR) SDRAM Controller Low Power Register
#define SDRAMC_IER      (AT91_CAST(AT91_REG *) 	0x00000014) // (SDRAMC_IER) SDRAM Controller Interrupt Enable Register
#define SDRAMC_IDR      (AT91_CAST(AT91_REG *) 	0x00000018) // (SDRAMC_IDR) SDRAM Controller Interrupt Disable Register
#define SDRAMC_IMR      (AT91_CAST(AT91_REG *) 	0x0000001C) // (SDRAMC_IMR) SDRAM Controller Interrupt Mask Register
#define SDRAMC_ISR      (AT91_CAST(AT91_REG *) 	0x00000020) // (SDRAMC_ISR) SDRAM Controller Interrupt Mask Register
#define SDRAMC_MDR      (AT91_CAST(AT91_REG *) 	0x00000024) // (SDRAMC_MDR) SDRAM Memory Device Register

#endif
// -------- SDRAMC_MR : (SDRAMC Offset: 0x0) SDRAM Controller Mode Register -------- 
#define AT91C_SDRAMC_MODE     (0xF <<  0) // (SDRAMC) Mode
#define 	AT91C_SDRAMC_MODE_NORMAL_CMD           (0x0) // (SDRAMC) Normal Mode
#define 	AT91C_SDRAMC_MODE_NOP_CMD              (0x1) // (SDRAMC) Issue a NOP Command at every access
#define 	AT91C_SDRAMC_MODE_PRCGALL_CMD          (0x2) // (SDRAMC) Issue a All Banks Precharge Command at every access
#define 	AT91C_SDRAMC_MODE_LMR_CMD              (0x3) // (SDRAMC) Issue a Load Mode Register at every access
#define 	AT91C_SDRAMC_MODE_RFSH_CMD             (0x4) // (SDRAMC) Issue a Refresh
#define 	AT91C_SDRAMC_MODE_EXT_LMR_CMD          (0x5) // (SDRAMC) Issue an Extended Load Mode Register
#define 	AT91C_SDRAMC_MODE_DEEP_CMD             (0x6) // (SDRAMC) Enter Deep Power Mode
// -------- SDRAMC_TR : (SDRAMC Offset: 0x4) SDRAMC Refresh Timer Register -------- 
#define AT91C_SDRAMC_COUNT    (0xFFF <<  0) // (SDRAMC) Refresh Counter
// -------- SDRAMC_CR : (SDRAMC Offset: 0x8) SDRAM Configuration Register -------- 
#define AT91C_SDRAMC_NC       (0x3 <<  0) // (SDRAMC) Number of Column Bits
#define 	AT91C_SDRAMC_NC_8                    (0x0) // (SDRAMC) 8 Bits
#define 	AT91C_SDRAMC_NC_9                    (0x1) // (SDRAMC) 9 Bits
#define 	AT91C_SDRAMC_NC_10                   (0x2) // (SDRAMC) 10 Bits
#define 	AT91C_SDRAMC_NC_11                   (0x3) // (SDRAMC) 11 Bits
#define AT91C_SDRAMC_NR       (0x3 <<  2) // (SDRAMC) Number of Row Bits
#define 	AT91C_SDRAMC_NR_11                   (0x0 <<  2) // (SDRAMC) 11 Bits
#define 	AT91C_SDRAMC_NR_12                   (0x1 <<  2) // (SDRAMC) 12 Bits
#define 	AT91C_SDRAMC_NR_13                   (0x2 <<  2) // (SDRAMC) 13 Bits
#define AT91C_SDRAMC_NB       (0x1 <<  4) // (SDRAMC) Number of Banks
#define 	AT91C_SDRAMC_NB_2_BANKS              (0x0 <<  4) // (SDRAMC) 2 banks
#define 	AT91C_SDRAMC_NB_4_BANKS              (0x1 <<  4) // (SDRAMC) 4 banks
#define AT91C_SDRAMC_CAS      (0x3 <<  5) // (SDRAMC) CAS Latency
#define 	AT91C_SDRAMC_CAS_2                    (0x2 <<  5) // (SDRAMC) 2 cycles
#define 	AT91C_SDRAMC_CAS_3                    (0x3 <<  5) // (SDRAMC) 3 cycles
#define AT91C_SDRAMC_DBW      (0x1 <<  7) // (SDRAMC) Data Bus Width
#define 	AT91C_SDRAMC_DBW_32_BITS              (0x0 <<  7) // (SDRAMC) 32 Bits datas bus
#define 	AT91C_SDRAMC_DBW_16_BITS              (0x1 <<  7) // (SDRAMC) 16 Bits datas bus
#define AT91C_SDRAMC_TWR      (0xF <<  8) // (SDRAMC) Number of Write Recovery Time Cycles
#define 	AT91C_SDRAMC_TWR_0                    (0x0 <<  8) // (SDRAMC) Value :  0
#define 	AT91C_SDRAMC_TWR_1                    (0x1 <<  8) // (SDRAMC) Value :  1
#define 	AT91C_SDRAMC_TWR_2                    (0x2 <<  8) // (SDRAMC) Value :  2
#define 	AT91C_SDRAMC_TWR_3                    (0x3 <<  8) // (SDRAMC) Value :  3
#define 	AT91C_SDRAMC_TWR_4                    (0x4 <<  8) // (SDRAMC) Value :  4
#define 	AT91C_SDRAMC_TWR_5                    (0x5 <<  8) // (SDRAMC) Value :  5
#define 	AT91C_SDRAMC_TWR_6                    (0x6 <<  8) // (SDRAMC) Value :  6
#define 	AT91C_SDRAMC_TWR_7                    (0x7 <<  8) // (SDRAMC) Value :  7
#define 	AT91C_SDRAMC_TWR_8                    (0x8 <<  8) // (SDRAMC) Value :  8
#define 	AT91C_SDRAMC_TWR_9                    (0x9 <<  8) // (SDRAMC) Value :  9
#define 	AT91C_SDRAMC_TWR_10                   (0xA <<  8) // (SDRAMC) Value : 10
#define 	AT91C_SDRAMC_TWR_11                   (0xB <<  8) // (SDRAMC) Value : 11
#define 	AT91C_SDRAMC_TWR_12                   (0xC <<  8) // (SDRAMC) Value : 12
#define 	AT91C_SDRAMC_TWR_13                   (0xD <<  8) // (SDRAMC) Value : 13
#define 	AT91C_SDRAMC_TWR_14                   (0xE <<  8) // (SDRAMC) Value : 14
#define 	AT91C_SDRAMC_TWR_15                   (0xF <<  8) // (SDRAMC) Value : 15
#define AT91C_SDRAMC_TRC      (0xF << 12) // (SDRAMC) Number of RAS Cycle Time Cycles
#define 	AT91C_SDRAMC_TRC_0                    (0x0 << 12) // (SDRAMC) Value :  0
#define 	AT91C_SDRAMC_TRC_1                    (0x1 << 12) // (SDRAMC) Value :  1
#define 	AT91C_SDRAMC_TRC_2                    (0x2 << 12) // (SDRAMC) Value :  2
#define 	AT91C_SDRAMC_TRC_3                    (0x3 << 12) // (SDRAMC) Value :  3
#define 	AT91C_SDRAMC_TRC_4                    (0x4 << 12) // (SDRAMC) Value :  4
#define 	AT91C_SDRAMC_TRC_5                    (0x5 << 12) // (SDRAMC) Value :  5
#define 	AT91C_SDRAMC_TRC_6                    (0x6 << 12) // (SDRAMC) Value :  6
#define 	AT91C_SDRAMC_TRC_7                    (0x7 << 12) // (SDRAMC) Value :  7
#define 	AT91C_SDRAMC_TRC_8                    (0x8 << 12) // (SDRAMC) Value :  8
#define 	AT91C_SDRAMC_TRC_9                    (0x9 << 12) // (SDRAMC) Value :  9
#define 	AT91C_SDRAMC_TRC_10                   (0xA << 12) // (SDRAMC) Value : 10
#define 	AT91C_SDRAMC_TRC_11                   (0xB << 12) // (SDRAMC) Value : 11
#define 	AT91C_SDRAMC_TRC_12                   (0xC << 12) // (SDRAMC) Value : 12
#define 	AT91C_SDRAMC_TRC_13                   (0xD << 12) // (SDRAMC) Value : 13
#define 	AT91C_SDRAMC_TRC_14                   (0xE << 12) // (SDRAMC) Value : 14
#define 	AT91C_SDRAMC_TRC_15                   (0xF << 12) // (SDRAMC) Value : 15
#define AT91C_SDRAMC_TRP      (0xF << 16) // (SDRAMC) Number of RAS Precharge Time Cycles
#define 	AT91C_SDRAMC_TRP_0                    (0x0 << 16) // (SDRAMC) Value :  0
#define 	AT91C_SDRAMC_TRP_1                    (0x1 << 16) // (SDRAMC) Value :  1
#define 	AT91C_SDRAMC_TRP_2                    (0x2 << 16) // (SDRAMC) Value :  2
#define 	AT91C_SDRAMC_TRP_3                    (0x3 << 16) // (SDRAMC) Value :  3
#define 	AT91C_SDRAMC_TRP_4                    (0x4 << 16) // (SDRAMC) Value :  4
#define 	AT91C_SDRAMC_TRP_5                    (0x5 << 16) // (SDRAMC) Value :  5
#define 	AT91C_SDRAMC_TRP_6                    (0x6 << 16) // (SDRAMC) Value :  6
#define 	AT91C_SDRAMC_TRP_7                    (0x7 << 16) // (SDRAMC) Value :  7
#define 	AT91C_SDRAMC_TRP_8                    (0x8 << 16) // (SDRAMC) Value :  8
#define 	AT91C_SDRAMC_TRP_9                    (0x9 << 16) // (SDRAMC) Value :  9
#define 	AT91C_SDRAMC_TRP_10                   (0xA << 16) // (SDRAMC) Value : 10
#define 	AT91C_SDRAMC_TRP_11                   (0xB << 16) // (SDRAMC) Value : 11
#define 	AT91C_SDRAMC_TRP_12                   (0xC << 16) // (SDRAMC) Value : 12
#define 	AT91C_SDRAMC_TRP_13                   (0xD << 16) // (SDRAMC) Value : 13
#define 	AT91C_SDRAMC_TRP_14                   (0xE << 16) // (SDRAMC) Value : 14
#define 	AT91C_SDRAMC_TRP_15                   (0xF << 16) // (SDRAMC) Value : 15
#define AT91C_SDRAMC_TRCD     (0xF << 20) // (SDRAMC) Number of RAS to CAS Delay Cycles
#define 	AT91C_SDRAMC_TRCD_0                    (0x0 << 20) // (SDRAMC) Value :  0
#define 	AT91C_SDRAMC_TRCD_1                    (0x1 << 20) // (SDRAMC) Value :  1
#define 	AT91C_SDRAMC_TRCD_2                    (0x2 << 20) // (SDRAMC) Value :  2
#define 	AT91C_SDRAMC_TRCD_3                    (0x3 << 20) // (SDRAMC) Value :  3
#define 	AT91C_SDRAMC_TRCD_4                    (0x4 << 20) // (SDRAMC) Value :  4
#define 	AT91C_SDRAMC_TRCD_5                    (0x5 << 20) // (SDRAMC) Value :  5
#define 	AT91C_SDRAMC_TRCD_6                    (0x6 << 20) // (SDRAMC) Value :  6
#define 	AT91C_SDRAMC_TRCD_7                    (0x7 << 20) // (SDRAMC) Value :  7
#define 	AT91C_SDRAMC_TRCD_8                    (0x8 << 20) // (SDRAMC) Value :  8
#define 	AT91C_SDRAMC_TRCD_9                    (0x9 << 20) // (SDRAMC) Value :  9
#define 	AT91C_SDRAMC_TRCD_10                   (0xA << 20) // (SDRAMC) Value : 10
#define 	AT91C_SDRAMC_TRCD_11                   (0xB << 20) // (SDRAMC) Value : 11
#define 	AT91C_SDRAMC_TRCD_12                   (0xC << 20) // (SDRAMC) Value : 12
#define 	AT91C_SDRAMC_TRCD_13                   (0xD << 20) // (SDRAMC) Value : 13
#define 	AT91C_SDRAMC_TRCD_14                   (0xE << 20) // (SDRAMC) Value : 14
#define 	AT91C_SDRAMC_TRCD_15                   (0xF << 20) // (SDRAMC) Value : 15
#define AT91C_SDRAMC_TRAS     (0xF << 24) // (SDRAMC) Number of RAS Active Time Cycles
#define 	AT91C_SDRAMC_TRAS_0                    (0x0 << 24) // (SDRAMC) Value :  0
#define 	AT91C_SDRAMC_TRAS_1                    (0x1 << 24) // (SDRAMC) Value :  1
#define 	AT91C_SDRAMC_TRAS_2                    (0x2 << 24) // (SDRAMC) Value :  2
#define 	AT91C_SDRAMC_TRAS_3                    (0x3 << 24) // (SDRAMC) Value :  3
#define 	AT91C_SDRAMC_TRAS_4                    (0x4 << 24) // (SDRAMC) Value :  4
#define 	AT91C_SDRAMC_TRAS_5                    (0x5 << 24) // (SDRAMC) Value :  5
#define 	AT91C_SDRAMC_TRAS_6                    (0x6 << 24) // (SDRAMC) Value :  6
#define 	AT91C_SDRAMC_TRAS_7                    (0x7 << 24) // (SDRAMC) Value :  7
#define 	AT91C_SDRAMC_TRAS_8                    (0x8 << 24) // (SDRAMC) Value :  8
#define 	AT91C_SDRAMC_TRAS_9                    (0x9 << 24) // (SDRAMC) Value :  9
#define 	AT91C_SDRAMC_TRAS_10                   (0xA << 24) // (SDRAMC) Value : 10
#define 	AT91C_SDRAMC_TRAS_11                   (0xB << 24) // (SDRAMC) Value : 11
#define 	AT91C_SDRAMC_TRAS_12                   (0xC << 24) // (SDRAMC) Value : 12
#define 	AT91C_SDRAMC_TRAS_13                   (0xD << 24) // (SDRAMC) Value : 13
#define 	AT91C_SDRAMC_TRAS_14                   (0xE << 24) // (SDRAMC) Value : 14
#define 	AT91C_SDRAMC_TRAS_15                   (0xF << 24) // (SDRAMC) Value : 15
#define AT91C_SDRAMC_TXSR     (0xF << 28) // (SDRAMC) Number of Command Recovery Time Cycles
#define 	AT91C_SDRAMC_TXSR_0                    (0x0 << 28) // (SDRAMC) Value :  0
#define 	AT91C_SDRAMC_TXSR_1                    (0x1 << 28) // (SDRAMC) Value :  1
#define 	AT91C_SDRAMC_TXSR_2                    (0x2 << 28) // (SDRAMC) Value :  2
#define 	AT91C_SDRAMC_TXSR_3                    (0x3 << 28) // (SDRAMC) Value :  3
#define 	AT91C_SDRAMC_TXSR_4                    (0x4 << 28) // (SDRAMC) Value :  4
#define 	AT91C_SDRAMC_TXSR_5                    (0x5 << 28) // (SDRAMC) Value :  5
#define 	AT91C_SDRAMC_TXSR_6                    (0x6 << 28) // (SDRAMC) Value :  6
#define 	AT91C_SDRAMC_TXSR_7                    (0x7 << 28) // (SDRAMC) Value :  7
#define 	AT91C_SDRAMC_TXSR_8                    (0x8 << 28) // (SDRAMC) Value :  8
#define 	AT91C_SDRAMC_TXSR_9                    (0x9 << 28) // (SDRAMC) Value :  9
#define 	AT91C_SDRAMC_TXSR_10                   (0xA << 28) // (SDRAMC) Value : 10
#define 	AT91C_SDRAMC_TXSR_11                   (0xB << 28) // (SDRAMC) Value : 11
#define 	AT91C_SDRAMC_TXSR_12                   (0xC << 28) // (SDRAMC) Value : 12
#define 	AT91C_SDRAMC_TXSR_13                   (0xD << 28) // (SDRAMC) Value : 13
#define 	AT91C_SDRAMC_TXSR_14                   (0xE << 28) // (SDRAMC) Value : 14
#define 	AT91C_SDRAMC_TXSR_15                   (0xF << 28) // (SDRAMC) Value : 15
// -------- SDRAMC_HSR : (SDRAMC Offset: 0xc) SDRAM Controller High Speed Register -------- 
#define AT91C_SDRAMC_DA       (0x1 <<  0) // (SDRAMC) Decode Cycle Enable Bit
#define 	AT91C_SDRAMC_DA_DISABLE              (0x0) // (SDRAMC) Disable Decode Cycle
#define 	AT91C_SDRAMC_DA_ENABLE               (0x1) // (SDRAMC) Enable Decode Cycle
// -------- SDRAMC_LPR : (SDRAMC Offset: 0x10) SDRAM Controller Low-power Register -------- 
#define AT91C_SDRAMC_LPCB     (0x3 <<  0) // (SDRAMC) Low-power Configurations
#define 	AT91C_SDRAMC_LPCB_DISABLE              (0x0) // (SDRAMC) Disable Low Power Features
#define 	AT91C_SDRAMC_LPCB_SELF_REFRESH         (0x1) // (SDRAMC) Enable SELF_REFRESH
#define 	AT91C_SDRAMC_LPCB_POWER_DOWN           (0x2) // (SDRAMC) Enable POWER_DOWN
#define 	AT91C_SDRAMC_LPCB_DEEP_POWER_DOWN      (0x3) // (SDRAMC) Enable DEEP_POWER_DOWN
#define AT91C_SDRAMC_PASR     (0x7 <<  4) // (SDRAMC) Partial Array Self Refresh (only for Low Power SDRAM)
#define AT91C_SDRAMC_TCSR     (0x3 <<  8) // (SDRAMC) Temperature Compensated Self Refresh (only for Low Power SDRAM)
#define AT91C_SDRAMC_DS       (0x3 << 10) // (SDRAMC) Drive Strenght (only for Low Power SDRAM)
#define AT91C_SDRAMC_TIMEOUT  (0x3 << 12) // (SDRAMC) Time to define when Low Power Mode is enabled
#define 	AT91C_SDRAMC_TIMEOUT_0_CLK_CYCLES         (0x0 << 12) // (SDRAMC) Activate SDRAM Low Power Mode Immediately
#define 	AT91C_SDRAMC_TIMEOUT_64_CLK_CYCLES        (0x1 << 12) // (SDRAMC) Activate SDRAM Low Power Mode after 64 clock cycles after the end of the last transfer
#define 	AT91C_SDRAMC_TIMEOUT_128_CLK_CYCLES       (0x2 << 12) // (SDRAMC) Activate SDRAM Low Power Mode after 64 clock cycles after the end of the last transfer
// -------- SDRAMC_IER : (SDRAMC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- 
#define AT91C_SDRAMC_RES      (0x1 <<  0) // (SDRAMC) Refresh Error Status
// -------- SDRAMC_IDR : (SDRAMC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- 
// -------- SDRAMC_IMR : (SDRAMC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- 
// -------- SDRAMC_ISR : (SDRAMC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- 
// -------- SDRAMC_MDR : (SDRAMC Offset: 0x24) SDRAM Controller Memory Device Register -------- 
#define AT91C_SDRAMC_MD       (0x3 <<  0) // (SDRAMC) Memory Device Type
#define 	AT91C_SDRAMC_MD_SDRAM                (0x0) // (SDRAMC) SDRAM Mode
#define 	AT91C_SDRAMC_MD_LOW_POWER_SDRAM      (0x1) // (SDRAMC) SDRAM Low Power Mode

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Static Memory Controller Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_SMC {
	AT91_REG	 SMC_SETUP0; 	//  Setup Register for CS 0
	AT91_REG	 SMC_PULSE0; 	//  Pulse Register for CS 0
	AT91_REG	 SMC_CYCLE0; 	//  Cycle Register for CS 0
	AT91_REG	 SMC_CTRL0; 	//  Control Register for CS 0
	AT91_REG	 SMC_SETUP1; 	//  Setup Register for CS 1
	AT91_REG	 SMC_PULSE1; 	//  Pulse Register for CS 1
	AT91_REG	 SMC_CYCLE1; 	//  Cycle Register for CS 1
	AT91_REG	 SMC_CTRL1; 	//  Control Register for CS 1
	AT91_REG	 SMC_SETUP2; 	//  Setup Register for CS 2
	AT91_REG	 SMC_PULSE2; 	//  Pulse Register for CS 2
	AT91_REG	 SMC_CYCLE2; 	//  Cycle Register for CS 2
	AT91_REG	 SMC_CTRL2; 	//  Control Register for CS 2
	AT91_REG	 SMC_SETUP3; 	//  Setup Register for CS 3
	AT91_REG	 SMC_PULSE3; 	//  Pulse Register for CS 3
	AT91_REG	 SMC_CYCLE3; 	//  Cycle Register for CS 3
	AT91_REG	 SMC_CTRL3; 	//  Control Register for CS 3
	AT91_REG	 SMC_SETUP4; 	//  Setup Register for CS 4
	AT91_REG	 SMC_PULSE4; 	//  Pulse Register for CS 4
	AT91_REG	 SMC_CYCLE4; 	//  Cycle Register for CS 4
	AT91_REG	 SMC_CTRL4; 	//  Control Register for CS 4
	AT91_REG	 SMC_SETUP5; 	//  Setup Register for CS 5
	AT91_REG	 SMC_PULSE5; 	//  Pulse Register for CS 5
	AT91_REG	 SMC_CYCLE5; 	//  Cycle Register for CS 5
	AT91_REG	 SMC_CTRL5; 	//  Control Register for CS 5
	AT91_REG	 SMC_SETUP6; 	//  Setup Register for CS 6
	AT91_REG	 SMC_PULSE6; 	//  Pulse Register for CS 6
	AT91_REG	 SMC_CYCLE6; 	//  Cycle Register for CS 6
	AT91_REG	 SMC_CTRL6; 	//  Control Register for CS 6
	AT91_REG	 SMC_SETUP7; 	//  Setup Register for CS 7
	AT91_REG	 SMC_PULSE7; 	//  Pulse Register for CS 7
	AT91_REG	 SMC_CYCLE7; 	//  Cycle Register for CS 7
	AT91_REG	 SMC_CTRL7; 	//  Control Register for CS 7
} AT91S_SMC, *AT91PS_SMC;
#else
#define SETUP0          (AT91_CAST(AT91_REG *) 	0x00000000) // (SETUP0)  Setup Register for CS 0
#define PULSE0          (AT91_CAST(AT91_REG *) 	0x00000004) // (PULSE0)  Pulse Register for CS 0
#define CYCLE0          (AT91_CAST(AT91_REG *) 	0x00000008) // (CYCLE0)  Cycle Register for CS 0
#define CTRL0           (AT91_CAST(AT91_REG *) 	0x0000000C) // (CTRL0)  Control Register for CS 0
#define SETUP1          (AT91_CAST(AT91_REG *) 	0x00000010) // (SETUP1)  Setup Register for CS 1
#define PULSE1          (AT91_CAST(AT91_REG *) 	0x00000014) // (PULSE1)  Pulse Register for CS 1
#define CYCLE1          (AT91_CAST(AT91_REG *) 	0x00000018) // (CYCLE1)  Cycle Register for CS 1
#define CTRL1           (AT91_CAST(AT91_REG *) 	0x0000001C) // (CTRL1)  Control Register for CS 1
#define SETUP2          (AT91_CAST(AT91_REG *) 	0x00000020) // (SETUP2)  Setup Register for CS 2
#define PULSE2          (AT91_CAST(AT91_REG *) 	0x00000024) // (PULSE2)  Pulse Register for CS 2
#define CYCLE2          (AT91_CAST(AT91_REG *) 	0x00000028) // (CYCLE2)  Cycle Register for CS 2
#define CTRL2           (AT91_CAST(AT91_REG *) 	0x0000002C) // (CTRL2)  Control Register for CS 2
#define SETUP3          (AT91_CAST(AT91_REG *) 	0x00000030) // (SETUP3)  Setup Register for CS 3
#define PULSE3          (AT91_CAST(AT91_REG *) 	0x00000034) // (PULSE3)  Pulse Register for CS 3
#define CYCLE3          (AT91_CAST(AT91_REG *) 	0x00000038) // (CYCLE3)  Cycle Register for CS 3
#define CTRL3           (AT91_CAST(AT91_REG *) 	0x0000003C) // (CTRL3)  Control Register for CS 3
#define SETUP4          (AT91_CAST(AT91_REG *) 	0x00000040) // (SETUP4)  Setup Register for CS 4
#define PULSE4          (AT91_CAST(AT91_REG *) 	0x00000044) // (PULSE4)  Pulse Register for CS 4
#define CYCLE4          (AT91_CAST(AT91_REG *) 	0x00000048) // (CYCLE4)  Cycle Register for CS 4
#define CTRL4           (AT91_CAST(AT91_REG *) 	0x0000004C) // (CTRL4)  Control Register for CS 4
#define SETUP5          (AT91_CAST(AT91_REG *) 	0x00000050) // (SETUP5)  Setup Register for CS 5
#define PULSE5          (AT91_CAST(AT91_REG *) 	0x00000054) // (PULSE5)  Pulse Register for CS 5
#define CYCLE5          (AT91_CAST(AT91_REG *) 	0x00000058) // (CYCLE5)  Cycle Register for CS 5
#define CTRL5           (AT91_CAST(AT91_REG *) 	0x0000005C) // (CTRL5)  Control Register for CS 5
#define SETUP6          (AT91_CAST(AT91_REG *) 	0x00000060) // (SETUP6)  Setup Register for CS 6
#define PULSE6          (AT91_CAST(AT91_REG *) 	0x00000064) // (PULSE6)  Pulse Register for CS 6
#define CYCLE6          (AT91_CAST(AT91_REG *) 	0x00000068) // (CYCLE6)  Cycle Register for CS 6
#define CTRL6           (AT91_CAST(AT91_REG *) 	0x0000006C) // (CTRL6)  Control Register for CS 6
#define SETUP7          (AT91_CAST(AT91_REG *) 	0x00000070) // (SETUP7)  Setup Register for CS 7
#define PULSE7          (AT91_CAST(AT91_REG *) 	0x00000074) // (PULSE7)  Pulse Register for CS 7
#define CYCLE7          (AT91_CAST(AT91_REG *) 	0x00000078) // (CYCLE7)  Cycle Register for CS 7
#define CTRL7           (AT91_CAST(AT91_REG *) 	0x0000007C) // (CTRL7)  Control Register for CS 7

#endif
// -------- SMC_SETUP : (SMC Offset: 0x0) Setup Register for CS x -------- 
#define AT91C_SMC_NWESETUP    (0x3F <<  0) // (SMC) NWE Setup Length
#define AT91C_SMC_NCSSETUPWR  (0x3F <<  8) // (SMC) NCS Setup Length in WRite Access
#define AT91C_SMC_NRDSETUP    (0x3F << 16) // (SMC) NRD Setup Length
#define AT91C_SMC_NCSSETUPRD  (0x3F << 24) // (SMC) NCS Setup Length in ReaD Access
// -------- SMC_PULSE : (SMC Offset: 0x4) Pulse Register for CS x -------- 
#define AT91C_SMC_NWEPULSE    (0x7F <<  0) // (SMC) NWE Pulse Length
#define AT91C_SMC_NCSPULSEWR  (0x7F <<  8) // (SMC) NCS Pulse Length in WRite Access
#define AT91C_SMC_NRDPULSE    (0x7F << 16) // (SMC) NRD Pulse Length
#define AT91C_SMC_NCSPULSERD  (0x7F << 24) // (SMC) NCS Pulse Length in ReaD Access
// -------- SMC_CYC : (SMC Offset: 0x8) Cycle Register for CS x -------- 
#define AT91C_SMC_NWECYCLE    (0x1FF <<  0) // (SMC) Total Write Cycle Length
#define AT91C_SMC_NRDCYCLE    (0x1FF << 16) // (SMC) Total Read Cycle Length
// -------- SMC_CTRL : (SMC Offset: 0xc) Control Register for CS x -------- 
#define AT91C_SMC_READMODE    (0x1 <<  0) // (SMC) Read Mode
#define AT91C_SMC_WRITEMODE   (0x1 <<  1) // (SMC) Write Mode
#define AT91C_SMC_NWAITM      (0x3 <<  4) // (SMC) NWAIT Mode
#define 	AT91C_SMC_NWAITM_NWAIT_DISABLE        (0x0 <<  4) // (SMC) External NWAIT disabled.
#define 	AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN  (0x2 <<  4) // (SMC) External NWAIT enabled in frozen mode.
#define 	AT91C_SMC_NWAITM_NWAIT_ENABLE_READY   (0x3 <<  4) // (SMC) External NWAIT enabled in ready mode.
#define AT91C_SMC_BAT         (0x1 <<  8) // (SMC) Byte Access Type
#define 	AT91C_SMC_BAT_BYTE_SELECT          (0x0 <<  8) // (SMC) Write controled by ncs, nbs0, nbs1, nbs2, nbs3. Read controled by ncs, nrd, nbs0, nbs1, nbs2, nbs3.
#define 	AT91C_SMC_BAT_BYTE_WRITE           (0x1 <<  8) // (SMC) Write controled by ncs, nwe0, nwe1, nwe2, nwe3. Read controled by ncs and nrd.
#define AT91C_SMC_DBW         (0x3 << 12) // (SMC) Data Bus Width
#define 	AT91C_SMC_DBW_WIDTH_EIGTH_BITS     (0x0 << 12) // (SMC) 8 bits.
#define 	AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS   (0x1 << 12) // (SMC) 16 bits.
#define 	AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS (0x2 << 12) // (SMC) 32 bits.
#define AT91C_SMC_TDF         (0xF << 16) // (SMC) Data Float Time.
#define AT91C_SMC_TDFEN       (0x1 << 20) // (SMC) TDF Enabled.
#define AT91C_SMC_PMEN        (0x1 << 24) // (SMC) Page Mode Enabled.
#define AT91C_SMC_PS          (0x3 << 28) // (SMC) Page Size
#define 	AT91C_SMC_PS_SIZE_FOUR_BYTES      (0x0 << 28) // (SMC) 4 bytes.
#define 	AT91C_SMC_PS_SIZE_EIGHT_BYTES     (0x1 << 28) // (SMC) 8 bytes.
#define 	AT91C_SMC_PS_SIZE_SIXTEEN_BYTES   (0x2 << 28) // (SMC) 16 bytes.
#define 	AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES (0x3 << 28) // (SMC) 32 bytes.
// -------- SMC_SETUP : (SMC Offset: 0x10) Setup Register for CS x -------- 
// -------- SMC_PULSE : (SMC Offset: 0x14) Pulse Register for CS x -------- 
// -------- SMC_CYC : (SMC Offset: 0x18) Cycle Register for CS x -------- 
// -------- SMC_CTRL : (SMC Offset: 0x1c) Control Register for CS x -------- 
// -------- SMC_SETUP : (SMC Offset: 0x20) Setup Register for CS x -------- 
// -------- SMC_PULSE : (SMC Offset: 0x24) Pulse Register for CS x -------- 
// -------- SMC_CYC : (SMC Offset: 0x28) Cycle Register for CS x -------- 
// -------- SMC_CTRL : (SMC Offset: 0x2c) Control Register for CS x -------- 
// -------- SMC_SETUP : (SMC Offset: 0x30) Setup Register for CS x -------- 
// -------- SMC_PULSE : (SMC Offset: 0x34) Pulse Register for CS x -------- 
// -------- SMC_CYC : (SMC Offset: 0x38) Cycle Register for CS x -------- 
// -------- SMC_CTRL : (SMC Offset: 0x3c) Control Register for CS x -------- 
// -------- SMC_SETUP : (SMC Offset: 0x40) Setup Register for CS x -------- 
// -------- SMC_PULSE : (SMC Offset: 0x44) Pulse Register for CS x -------- 
// -------- SMC_CYC : (SMC Offset: 0x48) Cycle Register for CS x -------- 
// -------- SMC_CTRL : (SMC Offset: 0x4c) Control Register for CS x -------- 
// -------- SMC_SETUP : (SMC Offset: 0x50) Setup Register for CS x -------- 
// -------- SMC_PULSE : (SMC Offset: 0x54) Pulse Register for CS x -------- 
// -------- SMC_CYC : (SMC Offset: 0x58) Cycle Register for CS x -------- 
// -------- SMC_CTRL : (SMC Offset: 0x5c) Control Register for CS x -------- 
// -------- SMC_SETUP : (SMC Offset: 0x60) Setup Register for CS x -------- 
// -------- SMC_PULSE : (SMC Offset: 0x64) Pulse Register for CS x -------- 
// -------- SMC_CYC : (SMC Offset: 0x68) Cycle Register for CS x -------- 
// -------- SMC_CTRL : (SMC Offset: 0x6c) Control Register for CS x -------- 
// -------- SMC_SETUP : (SMC Offset: 0x70) Setup Register for CS x -------- 
// -------- SMC_PULSE : (SMC Offset: 0x74) Pulse Register for CS x -------- 
// -------- SMC_CYC : (SMC Offset: 0x78) Cycle Register for CS x -------- 
// -------- SMC_CTRL : (SMC Offset: 0x7c) Control Register for CS x -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR External Bus Interface 1
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_EBI1 {
	AT91_REG	 EBI1_DUMMY; 	// Dummy register - Do not use
} AT91S_EBI1, *AT91PS_EBI1;
#else
#define EBI1_DUMMY      (AT91_CAST(AT91_REG *) 	0x00000000) // (EBI1_DUMMY) Dummy register - Do not use

#endif

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR AHB Matrix Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_MATRIX {
	AT91_REG	 MATRIX_MCFG0; 	//  Master Configuration Register 0 
	AT91_REG	 MATRIX_MCFG1; 	//  Master Configuration Register 1 
	AT91_REG	 MATRIX_MCFG2; 	//  Master Configuration Register 2 
	AT91_REG	 MATRIX_MCFG3; 	//  Master Configuration Register 3 
	AT91_REG	 MATRIX_MCFG4; 	//  Master Configuration Register 4 
	AT91_REG	 MATRIX_MCFG5; 	//  Master Configuration Register 5 
	AT91_REG	 MATRIX_MCFG6; 	//  Master Configuration Register 6 
	AT91_REG	 MATRIX_MCFG7; 	//  Master Configuration Register 7 
	AT91_REG	 MATRIX_MCFG8; 	//  Master Configuration Register 8 
	AT91_REG	 Reserved0[7]; 	// 
	AT91_REG	 MATRIX_SCFG0; 	//  Slave Configuration Register 0
	AT91_REG	 MATRIX_SCFG1; 	//  Slave Configuration Register 1
	AT91_REG	 MATRIX_SCFG2; 	//  Slave Configuration Register 2
	AT91_REG	 MATRIX_SCFG3; 	//  Slave Configuration Register 3
	AT91_REG	 MATRIX_SCFG4; 	//  Slave Configuration Register 4
	AT91_REG	 MATRIX_SCFG5; 	//  Slave Configuration Register 5
	AT91_REG	 MATRIX_SCFG6; 	//  Slave Configuration Register 6
	AT91_REG	 MATRIX_SCFG7; 	//  Slave Configuration Register 7
	AT91_REG	 Reserved1[8]; 	// 
	AT91_REG	 MATRIX_PRAS0; 	//  PRAS0
	AT91_REG	 MATRIX_PRBS0; 	//  PRBS0
	AT91_REG	 MATRIX_PRAS1; 	//  PRAS1
	AT91_REG	 MATRIX_PRBS1; 	//  PRBS1
	AT91_REG	 MATRIX_PRAS2; 	//  PRAS2
	AT91_REG	 MATRIX_PRBS2; 	//  PRBS2
	AT91_REG	 MATRIX_PRAS3; 	//  PRAS3
	AT91_REG	 MATRIX_PRBS3; 	//  PRBS3
	AT91_REG	 MATRIX_PRAS4; 	//  PRAS4
	AT91_REG	 MATRIX_PRBS4; 	//  PRBS4
	AT91_REG	 MATRIX_PRAS5; 	//  PRAS5
	AT91_REG	 MATRIX_PRBS5; 	//  PRBS5
	AT91_REG	 MATRIX_PRAS6; 	//  PRAS6
	AT91_REG	 MATRIX_PRBS6; 	//  PRBS6
	AT91_REG	 MATRIX_PRAS7; 	//  PRAS7
	AT91_REG	 MATRIX_PRBS7; 	//  PRBS7
	AT91_REG	 Reserved2[16]; 	// 
	AT91_REG	 MATRIX_MRCR; 	//  Master Remp Control Register 
} AT91S_MATRIX, *AT91PS_MATRIX;
#else
#define MATRIX_MCFG0    (AT91_CAST(AT91_REG *) 	0x00000000) // (MATRIX_MCFG0)  Master Configuration Register 0 
#define MATRIX_MCFG1    (AT91_CAST(AT91_REG *) 	0x00000004) // (MATRIX_MCFG1)  Master Configuration Register 1 
#define MATRIX_MCFG2    (AT91_CAST(AT91_REG *) 	0x00000008) // (MATRIX_MCFG2)  Master Configuration Register 2 
#define MATRIX_MCFG3    (AT91_CAST(AT91_REG *) 	0x0000000C) // (MATRIX_MCFG3)  Master Configuration Register 3 
#define MATRIX_MCFG4    (AT91_CAST(AT91_REG *) 	0x00000010) // (MATRIX_MCFG4)  Master Configuration Register 4 
#define MATRIX_MCFG5    (AT91_CAST(AT91_REG *) 	0x00000014) // (MATRIX_MCFG5)  Master Configuration Register 5 
#define MATRIX_MCFG6    (AT91_CAST(AT91_REG *) 	0x00000018) // (MATRIX_MCFG6)  Master Configuration Register 6 
#define MATRIX_MCFG7    (AT91_CAST(AT91_REG *) 	0x0000001C) // (MATRIX_MCFG7)  Master Configuration Register 7 
#define MATRIX_MCFG8    (AT91_CAST(AT91_REG *) 	0x00000020) // (MATRIX_MCFG8)  Master Configuration Register 8 
#define MATRIX_SCFG0    (AT91_CAST(AT91_REG *) 	0x00000040) // (MATRIX_SCFG0)  Slave Configuration Register 0
#define MATRIX_SCFG1    (AT91_CAST(AT91_REG *) 	0x00000044) // (MATRIX_SCFG1)  Slave Configuration Register 1
#define MATRIX_SCFG2    (AT91_CAST(AT91_REG *) 	0x00000048) // (MATRIX_SCFG2)  Slave Configuration Register 2
#define MATRIX_SCFG3    (AT91_CAST(AT91_REG *) 	0x0000004C) // (MATRIX_SCFG3)  Slave Configuration Register 3
#define MATRIX_SCFG4    (AT91_CAST(AT91_REG *) 	0x00000050) // (MATRIX_SCFG4)  Slave Configuration Register 4
#define MATRIX_SCFG5    (AT91_CAST(AT91_REG *) 	0x00000054) // (MATRIX_SCFG5)  Slave Configuration Register 5
#define MATRIX_SCFG6    (AT91_CAST(AT91_REG *) 	0x00000058) // (MATRIX_SCFG6)  Slave Configuration Register 6
#define MATRIX_SCFG7    (AT91_CAST(AT91_REG *) 	0x0000005C) // (MATRIX_SCFG7)  Slave Configuration Register 7
#define MATRIX_PRAS0    (AT91_CAST(AT91_REG *) 	0x00000080) // (MATRIX_PRAS0)  PRAS0
#define MATRIX_PRBS0    (AT91_CAST(AT91_REG *) 	0x00000084) // (MATRIX_PRBS0)  PRBS0
#define MATRIX_PRAS1    (AT91_CAST(AT91_REG *) 	0x00000088) // (MATRIX_PRAS1)  PRAS1
#define MATRIX_PRBS1    (AT91_CAST(AT91_REG *) 	0x0000008C) // (MATRIX_PRBS1)  PRBS1
#define MATRIX_PRAS2    (AT91_CAST(AT91_REG *) 	0x00000090) // (MATRIX_PRAS2)  PRAS2
#define MATRIX_PRBS2    (AT91_CAST(AT91_REG *) 	0x00000094) // (MATRIX_PRBS2)  PRBS2
#define MATRIX_PRAS3    (AT91_CAST(AT91_REG *) 	0x00000098) // (MATRIX_PRAS3)  PRAS3
#define MATRIX_PRBS3    (AT91_CAST(AT91_REG *) 	0x0000009C) // (MATRIX_PRBS3)  PRBS3
#define MATRIX_PRAS4    (AT91_CAST(AT91_REG *) 	0x000000A0) // (MATRIX_PRAS4)  PRAS4
#define MATRIX_PRBS4    (AT91_CAST(AT91_REG *) 	0x000000A4) // (MATRIX_PRBS4)  PRBS4
#define MATRIX_PRAS5    (AT91_CAST(AT91_REG *) 	0x000000A8) // (MATRIX_PRAS5)  PRAS5
#define MATRIX_PRBS5    (AT91_CAST(AT91_REG *) 	0x000000AC) // (MATRIX_PRBS5)  PRBS5
#define MATRIX_PRAS6    (AT91_CAST(AT91_REG *) 	0x000000B0) // (MATRIX_PRAS6)  PRAS6
#define MATRIX_PRBS6    (AT91_CAST(AT91_REG *) 	0x000000B4) // (MATRIX_PRBS6)  PRBS6
#define MATRIX_PRAS7    (AT91_CAST(AT91_REG *) 	0x000000B8) // (MATRIX_PRAS7)  PRAS7
#define MATRIX_PRBS7    (AT91_CAST(AT91_REG *) 	0x000000BC) // (MATRIX_PRBS7)  PRBS7
#define MATRIX_MRCR     (AT91_CAST(AT91_REG *) 	0x00000100) // (MATRIX_MRCR)  Master Remp Control Register 

#endif
// -------- MATRIX_MCFG0 : (MATRIX Offset: 0x0) Master Configuration Register rom -------- 
#define AT91C_MATRIX_ULBT     (0x7 <<  0) // (MATRIX) Undefined Length Burst Type
// -------- MATRIX_MCFG1 : (MATRIX Offset: 0x4) Master Configuration Register htcm -------- 
// -------- MATRIX_MCFG2 : (MATRIX Offset: 0x8) Master Configuration Register gps_tcm -------- 
// -------- MATRIX_MCFG3 : (MATRIX Offset: 0xc) Master Configuration Register hperiphs -------- 
// -------- MATRIX_MCFG4 : (MATRIX Offset: 0x10) Master Configuration Register ebi0 -------- 
// -------- MATRIX_MCFG5 : (MATRIX Offset: 0x14) Master Configuration Register ebi1 -------- 
// -------- MATRIX_MCFG6 : (MATRIX Offset: 0x18) Master Configuration Register bridge -------- 
// -------- MATRIX_MCFG7 : (MATRIX Offset: 0x1c) Master Configuration Register gps -------- 
// -------- MATRIX_MCFG8 : (MATRIX Offset: 0x20) Master Configuration Register gps -------- 
// -------- MATRIX_SCFG0 : (MATRIX Offset: 0x40) Slave Configuration Register 0 -------- 
#define AT91C_MATRIX_SLOT_CYCLE (0xFF <<  0) // (MATRIX) Maximum Number of Allowed Cycles for a Burst
#define AT91C_MATRIX_DEFMSTR_TYPE (0x3 << 16) // (MATRIX) Default Master Type
#define 	AT91C_MATRIX_DEFMSTR_TYPE_NO_DEFMSTR           (0x0 << 16) // (MATRIX) No Default Master. At the end of current slave access, if no other master request is pending, the slave is deconnected from all masters. This results in having a one cycle latency for the first transfer of a burst.
#define 	AT91C_MATRIX_DEFMSTR_TYPE_LAST_DEFMSTR         (0x1 << 16) // (MATRIX) Last Default Master. At the end of current slave access, if no other master request is pending, the slave stay connected with the last master having accessed it. This results in not having the one cycle latency when the last master re-trying access on the slave.
#define 	AT91C_MATRIX_DEFMSTR_TYPE_FIXED_DEFMSTR        (0x2 << 16) // (MATRIX) Fixed Default Master. At the end of current slave access, if no other master request is pending, the slave connects with fixed which number is in FIXED_DEFMSTR field. This results in not having the one cycle latency when the fixed master re-trying access on the slave.
#define AT91C_MATRIX_FIXED_DEFMSTR0 (0x7 << 18) // (MATRIX) Fixed Index of Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR0_ARM926I              (0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR0_ARM926D              (0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR0_PDC                  (0x2 << 18) // (MATRIX) PDC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR0_LCDC                 (0x3 << 18) // (MATRIX) LCDC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR0_2DGC                 (0x4 << 18) // (MATRIX) 2DGC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR0_ISI                  (0x5 << 18) // (MATRIX) ISI Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR0_DMA                  (0x6 << 18) // (MATRIX) DMA Controller Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR0_EMAC                 (0x7 << 18) // (MATRIX) EMAC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR0_USB                  (0x8 << 18) // (MATRIX) USB Master is Default Master
#define AT91C_MATRIX_ARBT     (0x3 << 24) // (MATRIX) Arbitration Type
// -------- MATRIX_SCFG1 : (MATRIX Offset: 0x44) Slave Configuration Register 1 -------- 
#define AT91C_MATRIX_FIXED_DEFMSTR1 (0x7 << 18) // (MATRIX) Fixed Index of Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR1_ARM926I              (0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR1_ARM926D              (0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR1_PDC                  (0x2 << 18) // (MATRIX) PDC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR1_LCDC                 (0x3 << 18) // (MATRIX) LCDC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR1_2DGC                 (0x4 << 18) // (MATRIX) 2DGC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR1_ISI                  (0x5 << 18) // (MATRIX) ISI Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR1_DMA                  (0x6 << 18) // (MATRIX) DMA Controller Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR1_EMAC                 (0x7 << 18) // (MATRIX) EMAC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR1_USB                  (0x8 << 18) // (MATRIX) USB Master is Default Master
// -------- MATRIX_SCFG2 : (MATRIX Offset: 0x48) Slave Configuration Register 2 -------- 
#define AT91C_MATRIX_FIXED_DEFMSTR2 (0x1 << 18) // (MATRIX) Fixed Index of Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR2_ARM926I              (0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR2_ARM926D              (0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR2_DMA                  (0x6 << 18) // (MATRIX) DMA Controller Master is Default Master
// -------- MATRIX_SCFG3 : (MATRIX Offset: 0x4c) Slave Configuration Register 3 -------- 
#define AT91C_MATRIX_FIXED_DEFMSTR3 (0x7 << 18) // (MATRIX) Fixed Index of Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR3_ARM926I              (0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR3_ARM926D              (0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR3_PDC                  (0x2 << 18) // (MATRIX) PDC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR3_LCDC                 (0x3 << 18) // (MATRIX) LCDC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR3_2DGC                 (0x4 << 18) // (MATRIX) 2DGC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR3_ISI                  (0x5 << 18) // (MATRIX) ISI Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR3_DMA                  (0x6 << 18) // (MATRIX) DMA Controller Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR3_EMAC                 (0x7 << 18) // (MATRIX) EMAC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR3_USB                  (0x8 << 18) // (MATRIX) USB Master is Default Master
// -------- MATRIX_SCFG4 : (MATRIX Offset: 0x50) Slave Configuration Register 4 -------- 
#define AT91C_MATRIX_FIXED_DEFMSTR4 (0x3 << 18) // (MATRIX) Fixed Index of Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR4_ARM926I              (0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR4_ARM926D              (0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR4_DMA                  (0x6 << 18) // (MATRIX) DMA Controller Master is Default Master
// -------- MATRIX_SCFG5 : (MATRIX Offset: 0x54) Slave Configuration Register 5 -------- 
#define AT91C_MATRIX_FIXED_DEFMSTR5 (0x3 << 18) // (MATRIX) Fixed Index of Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR5_ARM926I              (0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR5_ARM926D              (0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR5_PDC                  (0x2 << 18) // (MATRIX) PDC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR5_LCDC                 (0x3 << 18) // (MATRIX) LCDC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR5_2DGC                 (0x4 << 18) // (MATRIX) 2DGC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR5_ISI                  (0x5 << 18) // (MATRIX) ISI Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR5_DMA                  (0x6 << 18) // (MATRIX) DMA Controller Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR5_EMAC                 (0x7 << 18) // (MATRIX) EMAC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR5_USB                  (0x8 << 18) // (MATRIX) USB Master is Default Master
// -------- MATRIX_SCFG6 : (MATRIX Offset: 0x58) Slave Configuration Register 6 -------- 
#define AT91C_MATRIX_FIXED_DEFMSTR6 (0x3 << 18) // (MATRIX) Fixed Index of Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR6_ARM926I              (0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR6_ARM926D              (0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR6_PDC                  (0x2 << 18) // (MATRIX) PDC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR6_LCDC                 (0x3 << 18) // (MATRIX) LCDC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR6_2DGC                 (0x4 << 18) // (MATRIX) 2DGC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR6_ISI                  (0x5 << 18) // (MATRIX) ISI Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR6_DMA                  (0x6 << 18) // (MATRIX) DMA Controller Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR6_EMAC                 (0x7 << 18) // (MATRIX) EMAC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR6_USB                  (0x8 << 18) // (MATRIX) USB Master is Default Master
// -------- MATRIX_SCFG7 : (MATRIX Offset: 0x5c) Slave Configuration Register 7 -------- 
#define AT91C_MATRIX_FIXED_DEFMSTR7 (0x3 << 18) // (MATRIX) Fixed Index of Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR7_ARM926I              (0x0 << 18) // (MATRIX) ARM926EJ-S Instruction Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR7_ARM926D              (0x1 << 18) // (MATRIX) ARM926EJ-S Data Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR7_PDC                  (0x2 << 18) // (MATRIX) PDC Master is Default Master
#define 	AT91C_MATRIX_FIXED_DEFMSTR7_DMA                  (0x6 << 18) // (MATRIX) DMA Controller Master is Default Master
// -------- MATRIX_PRAS0 : (MATRIX Offset: 0x80) PRAS0 Register -------- 
#define AT91C_MATRIX_M0PR     (0x3 <<  0) // (MATRIX) ARM926EJ-S Instruction priority
#define AT91C_MATRIX_M1PR     (0x3 <<  4) // (MATRIX) ARM926EJ-S Data priority
#define AT91C_MATRIX_M2PR     (0x3 <<  8) // (MATRIX) PDC priority
#define AT91C_MATRIX_M3PR     (0x3 << 12) // (MATRIX) LCDC priority
#define AT91C_MATRIX_M4PR     (0x3 << 16) // (MATRIX) 2DGC priority
#define AT91C_MATRIX_M5PR     (0x3 << 20) // (MATRIX) ISI priority
#define AT91C_MATRIX_M6PR     (0x3 << 24) // (MATRIX) DMA priority
#define AT91C_MATRIX_M7PR     (0x3 << 28) // (MATRIX) EMAC priority
// -------- MATRIX_PRBS0 : (MATRIX Offset: 0x84) PRBS0 Register -------- 
#define AT91C_MATRIX_M8PR     (0x3 <<  0) // (MATRIX) USB priority
// -------- MATRIX_PRAS1 : (MATRIX Offset: 0x88) PRAS1 Register -------- 
// -------- MATRIX_PRBS1 : (MATRIX Offset: 0x8c) PRBS1 Register -------- 
// -------- MATRIX_PRAS2 : (MATRIX Offset: 0x90) PRAS2 Register -------- 
// -------- MATRIX_PRBS2 : (MATRIX Offset: 0x94) PRBS2 Register -------- 
// -------- MATRIX_PRAS3 : (MATRIX Offset: 0x98) PRAS3 Register -------- 
// -------- MATRIX_PRBS3 : (MATRIX Offset: 0x9c) PRBS3 Register -------- 
// -------- MATRIX_PRAS4 : (MATRIX Offset: 0xa0) PRAS4 Register -------- 
// -------- MATRIX_PRBS4 : (MATRIX Offset: 0xa4) PRBS4 Register -------- 
// -------- MATRIX_PRAS5 : (MATRIX Offset: 0xa8) PRAS5 Register -------- 
// -------- MATRIX_PRBS5 : (MATRIX Offset: 0xac) PRBS5 Register -------- 
// -------- MATRIX_PRAS6 : (MATRIX Offset: 0xb0) PRAS6 Register -------- 
// -------- MATRIX_PRBS6 : (MATRIX Offset: 0xb4) PRBS6 Register -------- 
// -------- MATRIX_PRAS7 : (MATRIX Offset: 0xb8) PRAS7 Register -------- 
// -------- MATRIX_PRBS7 : (MATRIX Offset: 0xbc) PRBS7 Register -------- 
// -------- MATRIX_MRCR : (MATRIX Offset: 0x100) MRCR Register -------- 
#define AT91C_MATRIX_RCA926I  (0x1 <<  0) // (MATRIX) Remap Command Bit for ARM926EJ-S Instruction
#define AT91C_MATRIX_RCA926D  (0x1 <<  1) // (MATRIX) Remap Command Bit for ARM926EJ-S Data
#define AT91C_MATRIX_RCB2     (0x1 <<  2) // (MATRIX) Remap Command Bit for PDC
#define AT91C_MATRIX_RCB3     (0x1 <<  3) // (MATRIX) Remap Command Bit for LCD
#define AT91C_MATRIX_RCB4     (0x1 <<  4) // (MATRIX) Remap Command Bit for 2DGC
#define AT91C_MATRIX_RCB5     (0x1 <<  5) // (MATRIX) Remap Command Bit for ISI
#define AT91C_MATRIX_RCB6     (0x1 <<  6) // (MATRIX) Remap Command Bit for DMA
#define AT91C_MATRIX_RCB7     (0x1 <<  7) // (MATRIX) Remap Command Bit for EMAC
#define AT91C_MATRIX_RCB8     (0x1 <<  8) // (MATRIX) Remap Command Bit for USB

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Peripheral DMA Controller
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_PDC {
	AT91_REG	 PDC_RPR; 	// Receive Pointer Register
	AT91_REG	 PDC_RCR; 	// Receive Counter Register
	AT91_REG	 PDC_TPR; 	// Transmit Pointer Register
	AT91_REG	 PDC_TCR; 	// Transmit Counter Register
	AT91_REG	 PDC_RNPR; 	// Receive Next Pointer Register
	AT91_REG	 PDC_RNCR; 	// Receive Next Counter Register
	AT91_REG	 PDC_TNPR; 	// Transmit Next Pointer Register
	AT91_REG	 PDC_TNCR; 	// Transmit Next Counter Register
	AT91_REG	 PDC_PTCR; 	// PDC Transfer Control Register
	AT91_REG	 PDC_PTSR; 	// PDC Transfer Status Register
} AT91S_PDC, *AT91PS_PDC;
#else
#define PDC_RPR         (AT91_CAST(AT91_REG *) 	0x00000000) // (PDC_RPR) Receive Pointer Register
#define PDC_RCR         (AT91_CAST(AT91_REG *) 	0x00000004) // (PDC_RCR) Receive Counter Register
#define PDC_TPR         (AT91_CAST(AT91_REG *) 	0x00000008) // (PDC_TPR) Transmit Pointer Register
#define PDC_TCR         (AT91_CAST(AT91_REG *) 	0x0000000C) // (PDC_TCR) Transmit Counter Register
#define PDC_RNPR        (AT91_CAST(AT91_REG *) 	0x00000010) // (PDC_RNPR) Receive Next Pointer Register
#define PDC_RNCR        (AT91_CAST(AT91_REG *) 	0x00000014) // (PDC_RNCR) Receive Next Counter Register
#define PDC_TNPR        (AT91_CAST(AT91_REG *) 	0x00000018) // (PDC_TNPR) Transmit Next Pointer Register
#define PDC_TNCR        (AT91_CAST(AT91_REG *) 	0x0000001C) // (PDC_TNCR) Transmit Next Counter Register
#define PDC_PTCR        (AT91_CAST(AT91_REG *) 	0x00000020) // (PDC_PTCR) PDC Transfer Control Register
#define PDC_PTSR        (AT91_CAST(AT91_REG *) 	0x00000024) // (PDC_PTSR) PDC Transfer Status Register

#endif
// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- 
#define AT91C_PDC_RXTEN       (0x1 <<  0) // (PDC) Receiver Transfer Enable
#define AT91C_PDC_RXTDIS      (0x1 <<  1) // (PDC) Receiver Transfer Disable
#define AT91C_PDC_TXTEN       (0x1 <<  8) // (PDC) Transmitter Transfer Enable
#define AT91C_PDC_TXTDIS      (0x1 <<  9) // (PDC) Transmitter Transfer Disable
// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Debug Unit
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_DBGU {
	AT91_REG	 DBGU_CR; 	// Control Register
	AT91_REG	 DBGU_MR; 	// Mode Register
	AT91_REG	 DBGU_IER; 	// Interrupt Enable Register
	AT91_REG	 DBGU_IDR; 	// Interrupt Disable Register
	AT91_REG	 DBGU_IMR; 	// Interrupt Mask Register
	AT91_REG	 DBGU_CSR; 	// Channel Status Register
	AT91_REG	 DBGU_RHR; 	// Receiver Holding Register
	AT91_REG	 DBGU_THR; 	// Transmitter Holding Register
	AT91_REG	 DBGU_BRGR; 	// Baud Rate Generator Register
	AT91_REG	 Reserved0[7]; 	// 
	AT91_REG	 DBGU_CIDR; 	// Chip ID Register
	AT91_REG	 DBGU_EXID; 	// Chip ID Extension Register
	AT91_REG	 DBGU_FNTR; 	// Force NTRST Register
	AT91_REG	 Reserved1[45]; 	// 
	AT91_REG	 DBGU_RPR; 	// Receive Pointer Register
	AT91_REG	 DBGU_RCR; 	// Receive Counter Register
	AT91_REG	 DBGU_TPR; 	// Transmit Pointer Register
	AT91_REG	 DBGU_TCR; 	// Transmit Counter Register
	AT91_REG	 DBGU_RNPR; 	// Receive Next Pointer Register
	AT91_REG	 DBGU_RNCR; 	// Receive Next Counter Register
	AT91_REG	 DBGU_TNPR; 	// Transmit Next Pointer Register
	AT91_REG	 DBGU_TNCR; 	// Transmit Next Counter Register
	AT91_REG	 DBGU_PTCR; 	// PDC Transfer Control Register
	AT91_REG	 DBGU_PTSR; 	// PDC Transfer Status Register
} AT91S_DBGU, *AT91PS_DBGU;
#else
#define DBGU_CR         (AT91_CAST(AT91_REG *) 	0x00000000) // (DBGU_CR) Control Register
#define DBGU_MR         (AT91_CAST(AT91_REG *) 	0x00000004) // (DBGU_MR) Mode Register
#define DBGU_IER        (AT91_CAST(AT91_REG *) 	0x00000008) // (DBGU_IER) Interrupt Enable Register
#define DBGU_IDR        (AT91_CAST(AT91_REG *) 	0x0000000C) // (DBGU_IDR) Interrupt Disable Register
#define DBGU_IMR        (AT91_CAST(AT91_REG *) 	0x00000010) // (DBGU_IMR) Interrupt Mask Register
#define DBGU_CSR        (AT91_CAST(AT91_REG *) 	0x00000014) // (DBGU_CSR) Channel Status Register
#define DBGU_RHR        (AT91_CAST(AT91_REG *) 	0x00000018) // (DBGU_RHR) Receiver Holding Register
#define DBGU_THR        (AT91_CAST(AT91_REG *) 	0x0000001C) // (DBGU_THR) Transmitter Holding Register
#define DBGU_BRGR       (AT91_CAST(AT91_REG *) 	0x00000020) // (DBGU_BRGR) Baud Rate Generator Register
#define DBGU_CIDR       (AT91_CAST(AT91_REG *) 	0x00000040) // (DBGU_CIDR) Chip ID Register
#define DBGU_EXID       (AT91_CAST(AT91_REG *) 	0x00000044) // (DBGU_EXID) Chip ID Extension Register
#define DBGU_FNTR       (AT91_CAST(AT91_REG *) 	0x00000048) // (DBGU_FNTR) Force NTRST Register

#endif
// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- 
#define AT91C_US_RSTRX        (0x1 <<  2) // (DBGU) Reset Receiver
#define AT91C_US_RSTTX        (0x1 <<  3) // (DBGU) Reset Transmitter
#define AT91C_US_RXEN         (0x1 <<  4) // (DBGU) Receiver Enable
#define AT91C_US_RXDIS        (0x1 <<  5) // (DBGU) Receiver Disable
#define AT91C_US_TXEN         (0x1 <<  6) // (DBGU) Transmitter Enable
#define AT91C_US_TXDIS        (0x1 <<  7) // (DBGU) Transmitter Disable
#define AT91C_US_RSTSTA       (0x1 <<  8) // (DBGU) Reset Status Bits
// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- 
#define AT91C_US_PAR          (0x7 <<  9) // (DBGU) Parity type
#define 	AT91C_US_PAR_EVEN                 (0x0 <<  9) // (DBGU) Even Parity
#define 	AT91C_US_PAR_ODD                  (0x1 <<  9) // (DBGU) Odd Parity
#define 	AT91C_US_PAR_SPACE                (0x2 <<  9) // (DBGU) Parity forced to 0 (Space)
#define 	AT91C_US_PAR_MARK                 (0x3 <<  9) // (DBGU) Parity forced to 1 (Mark)
#define 	AT91C_US_PAR_NONE                 (0x4 <<  9) // (DBGU) No Parity
#define 	AT91C_US_PAR_MULTI_DROP           (0x6 <<  9) // (DBGU) Multi-drop mode
#define AT91C_US_CHMODE       (0x3 << 14) // (DBGU) Channel Mode
#define 	AT91C_US_CHMODE_NORMAL               (0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART.
#define 	AT91C_US_CHMODE_AUTO                 (0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin.
#define 	AT91C_US_CHMODE_LOCAL                (0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal.
#define 	AT91C_US_CHMODE_REMOTE               (0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin.
// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
#define AT91C_US_RXRDY        (0x1 <<  0) // (DBGU) RXRDY Interrupt
#define AT91C_US_TXRDY        (0x1 <<  1) // (DBGU) TXRDY Interrupt
#define AT91C_US_ENDRX        (0x1 <<  3) // (DBGU) End of Receive Transfer Interrupt
#define AT91C_US_ENDTX        (0x1 <<  4) // (DBGU) End of Transmit Interrupt
#define AT91C_US_OVRE         (0x1 <<  5) // (DBGU) Overrun Interrupt
#define AT91C_US_FRAME        (0x1 <<  6) // (DBGU) Framing Error Interrupt
#define AT91C_US_PARE         (0x1 <<  7) // (DBGU) Parity Error Interrupt
#define AT91C_US_TXEMPTY      (0x1 <<  9) // (DBGU) TXEMPTY Interrupt
#define AT91C_US_TXBUFE       (0x1 << 11) // (DBGU) TXBUFE Interrupt
#define AT91C_US_RXBUFF       (0x1 << 12) // (DBGU) RXBUFF Interrupt
#define AT91C_US_COMM_TX      (0x1 << 30) // (DBGU) COMM_TX Interrupt
#define AT91C_US_COMM_RX      (0x1 << 31) // (DBGU) COMM_RX Interrupt
// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- 
// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- 
#define AT91C_US_FORCE_NTRST  (0x1 <<  0) // (DBGU) Force NTRST in JTAG

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Advanced Interrupt Controller
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_AIC {
	AT91_REG	 AIC_SMR[32]; 	// Source Mode Register
	AT91_REG	 AIC_SVR[32]; 	// Source Vector Register
	AT91_REG	 AIC_IVR; 	// IRQ Vector Register
	AT91_REG	 AIC_FVR; 	// FIQ Vector Register
	AT91_REG	 AIC_ISR; 	// Interrupt Status Register
	AT91_REG	 AIC_IPR; 	// Interrupt Pending Register
	AT91_REG	 AIC_IMR; 	// Interrupt Mask Register
	AT91_REG	 AIC_CISR; 	// Core Interrupt Status Register
	AT91_REG	 Reserved0[2]; 	// 
	AT91_REG	 AIC_IECR; 	// Interrupt Enable Command Register
	AT91_REG	 AIC_IDCR; 	// Interrupt Disable Command Register
	AT91_REG	 AIC_ICCR; 	// Interrupt Clear Command Register
	AT91_REG	 AIC_ISCR; 	// Interrupt Set Command Register
	AT91_REG	 AIC_EOICR; 	// End of Interrupt Command Register
	AT91_REG	 AIC_SPU; 	// Spurious Vector Register
	AT91_REG	 AIC_DCR; 	// Debug Control Register (Protect)
	AT91_REG	 Reserved1[1]; 	// 
	AT91_REG	 AIC_FFER; 	// Fast Forcing Enable Register
	AT91_REG	 AIC_FFDR; 	// Fast Forcing Disable Register
	AT91_REG	 AIC_FFSR; 	// Fast Forcing Status Register
} AT91S_AIC, *AT91PS_AIC;
#else
#define AIC_SMR         (AT91_CAST(AT91_REG *) 	0x00000000) // (AIC_SMR) Source Mode Register
#define AIC_SVR         (AT91_CAST(AT91_REG *) 	0x00000080) // (AIC_SVR) Source Vector Register
#define AIC_IVR         (AT91_CAST(AT91_REG *) 	0x00000100) // (AIC_IVR) IRQ Vector Register
#define AIC_FVR         (AT91_CAST(AT91_REG *) 	0x00000104) // (AIC_FVR) FIQ Vector Register
#define AIC_ISR         (AT91_CAST(AT91_REG *) 	0x00000108) // (AIC_ISR) Interrupt Status Register
#define AIC_IPR         (AT91_CAST(AT91_REG *) 	0x0000010C) // (AIC_IPR) Interrupt Pending Register
#define AIC_IMR         (AT91_CAST(AT91_REG *) 	0x00000110) // (AIC_IMR) Interrupt Mask Register
#define AIC_CISR        (AT91_CAST(AT91_REG *) 	0x00000114) // (AIC_CISR) Core Interrupt Status Register
#define AIC_IECR        (AT91_CAST(AT91_REG *) 	0x00000120) // (AIC_IECR) Interrupt Enable Command Register
#define AIC_IDCR        (AT91_CAST(AT91_REG *) 	0x00000124) // (AIC_IDCR) Interrupt Disable Command Register
#define AIC_ICCR        (AT91_CAST(AT91_REG *) 	0x00000128) // (AIC_ICCR) Interrupt Clear Command Register
#define AIC_ISCR        (AT91_CAST(AT91_REG *) 	0x0000012C) // (AIC_ISCR) Interrupt Set Command Register
#define AIC_EOICR       (AT91_CAST(AT91_REG *) 	0x00000130) // (AIC_EOICR) End of Interrupt Command Register
#define AIC_SPU         (AT91_CAST(AT91_REG *) 	0x00000134) // (AIC_SPU) Spurious Vector Register
#define AIC_DCR         (AT91_CAST(AT91_REG *) 	0x00000138) // (AIC_DCR) Debug Control Register (Protect)
#define AIC_FFER        (AT91_CAST(AT91_REG *) 	0x00000140) // (AIC_FFER) Fast Forcing Enable Register
#define AIC_FFDR        (AT91_CAST(AT91_REG *) 	0x00000144) // (AIC_FFDR) Fast Forcing Disable Register
#define AIC_FFSR        (AT91_CAST(AT91_REG *) 	0x00000148) // (AIC_FFSR) Fast Forcing Status Register

#endif
// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- 
#define AT91C_AIC_PRIOR       (0x7 <<  0) // (AIC) Priority Level
#define 	AT91C_AIC_PRIOR_LOWEST               (0x0) // (AIC) Lowest priority level
#define 	AT91C_AIC_PRIOR_HIGHEST              (0x7) // (AIC) Highest priority level
#define AT91C_AIC_SRCTYPE     (0x3 <<  5) // (AIC) Interrupt Source Type
#define 	AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE  (0x0 <<  5) // (AIC) Internal Sources Code Label Level Sensitive
#define 	AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED   (0x1 <<  5) // (AIC) Internal Sources Code Label Edge triggered
#define 	AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL       (0x2 <<  5) // (AIC) External Sources Code Label High-level Sensitive
#define 	AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE    (0x3 <<  5) // (AIC) External Sources Code Label Positive Edge triggered
// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- 
#define AT91C_AIC_NFIQ        (0x1 <<  0) // (AIC) NFIQ Status
#define AT91C_AIC_NIRQ        (0x1 <<  1) // (AIC) NIRQ Status
// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- 
#define AT91C_AIC_DCR_PROT    (0x1 <<  0) // (AIC) Protection Mode
#define AT91C_AIC_DCR_GMSK    (0x1 <<  1) // (AIC) General Mask

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Parallel Input Output Controler
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_PIO {
	AT91_REG	 PIO_PER; 	// PIO Enable Register
	AT91_REG	 PIO_PDR; 	// PIO Disable Register
	AT91_REG	 PIO_PSR; 	// PIO Status Register
	AT91_REG	 Reserved0[1]; 	// 
	AT91_REG	 PIO_OER; 	// Output Enable Register
	AT91_REG	 PIO_ODR; 	// Output Disable Registerr
	AT91_REG	 PIO_OSR; 	// Output Status Register
	AT91_REG	 Reserved1[1]; 	// 
	AT91_REG	 PIO_IFER; 	// Input Filter Enable Register
	AT91_REG	 PIO_IFDR; 	// Input Filter Disable Register
	AT91_REG	 PIO_IFSR; 	// Input Filter Status Register
	AT91_REG	 Reserved2[1]; 	// 
	AT91_REG	 PIO_SODR; 	// Set Output Data Register
	AT91_REG	 PIO_CODR; 	// Clear Output Data Register
	AT91_REG	 PIO_ODSR; 	// Output Data Status Register
	AT91_REG	 PIO_PDSR; 	// Pin Data Status Register
	AT91_REG	 PIO_IER; 	// Interrupt Enable Register
	AT91_REG	 PIO_IDR; 	// Interrupt Disable Register
	AT91_REG	 PIO_IMR; 	// Interrupt Mask Register
	AT91_REG	 PIO_ISR; 	// Interrupt Status Register
	AT91_REG	 PIO_MDER; 	// Multi-driver Enable Register
	AT91_REG	 PIO_MDDR; 	// Multi-driver Disable Register
	AT91_REG	 PIO_MDSR; 	// Multi-driver Status Register
	AT91_REG	 Reserved3[1]; 	// 
	AT91_REG	 PIO_PPUDR; 	// Pull-up Disable Register
	AT91_REG	 PIO_PPUER; 	// Pull-up Enable Register
	AT91_REG	 PIO_PPUSR; 	// Pull-up Status Register
	AT91_REG	 Reserved4[1]; 	// 
	AT91_REG	 PIO_ASR; 	// Select A Register
	AT91_REG	 PIO_BSR; 	// Select B Register
	AT91_REG	 PIO_ABSR; 	// AB Select Status Register
	AT91_REG	 Reserved5[9]; 	// 
	AT91_REG	 PIO_OWER; 	// Output Write Enable Register
	AT91_REG	 PIO_OWDR; 	// Output Write Disable Register
	AT91_REG	 PIO_OWSR; 	// Output Write Status Register
} AT91S_PIO, *AT91PS_PIO;
#else
#define PIO_PER         (AT91_CAST(AT91_REG *) 	0x00000000) // (PIO_PER) PIO Enable Register
#define PIO_PDR         (AT91_CAST(AT91_REG *) 	0x00000004) // (PIO_PDR) PIO Disable Register
#define PIO_PSR         (AT91_CAST(AT91_REG *) 	0x00000008) // (PIO_PSR) PIO Status Register
#define PIO_OER         (AT91_CAST(AT91_REG *) 	0x00000010) // (PIO_OER) Output Enable Register
#define PIO_ODR         (AT91_CAST(AT91_REG *) 	0x00000014) // (PIO_ODR) Output Disable Registerr
#define PIO_OSR         (AT91_CAST(AT91_REG *) 	0x00000018) // (PIO_OSR) Output Status Register
#define PIO_IFER        (AT91_CAST(AT91_REG *) 	0x00000020) // (PIO_IFER) Input Filter Enable Register
#define PIO_IFDR        (AT91_CAST(AT91_REG *) 	0x00000024) // (PIO_IFDR) Input Filter Disable Register
#define PIO_IFSR        (AT91_CAST(AT91_REG *) 	0x00000028) // (PIO_IFSR) Input Filter Status Register
#define PIO_SODR        (AT91_CAST(AT91_REG *) 	0x00000030) // (PIO_SODR) Set Output Data Register
#define PIO_CODR        (AT91_CAST(AT91_REG *) 	0x00000034) // (PIO_CODR) Clear Output Data Register
#define PIO_ODSR        (AT91_CAST(AT91_REG *) 	0x00000038) // (PIO_ODSR) Output Data Status Register
#define PIO_PDSR        (AT91_CAST(AT91_REG *) 	0x0000003C) // (PIO_PDSR) Pin Data Status Register
#define PIO_IER         (AT91_CAST(AT91_REG *) 	0x00000040) // (PIO_IER) Interrupt Enable Register
#define PIO_IDR         (AT91_CAST(AT91_REG *) 	0x00000044) // (PIO_IDR) Interrupt Disable Register
#define PIO_IMR         (AT91_CAST(AT91_REG *) 	0x00000048) // (PIO_IMR) Interrupt Mask Register
#define PIO_ISR         (AT91_CAST(AT91_REG *) 	0x0000004C) // (PIO_ISR) Interrupt Status Register
#define PIO_MDER        (AT91_CAST(AT91_REG *) 	0x00000050) // (PIO_MDER) Multi-driver Enable Register
#define PIO_MDDR        (AT91_CAST(AT91_REG *) 	0x00000054) // (PIO_MDDR) Multi-driver Disable Register
#define PIO_MDSR        (AT91_CAST(AT91_REG *) 	0x00000058) // (PIO_MDSR) Multi-driver Status Register
#define PIO_PPUDR       (AT91_CAST(AT91_REG *) 	0x00000060) // (PIO_PPUDR) Pull-up Disable Register
#define PIO_PPUER       (AT91_CAST(AT91_REG *) 	0x00000064) // (PIO_PPUER) Pull-up Enable Register
#define PIO_PPUSR       (AT91_CAST(AT91_REG *) 	0x00000068) // (PIO_PPUSR) Pull-up Status Register
#define PIO_ASR         (AT91_CAST(AT91_REG *) 	0x00000070) // (PIO_ASR) Select A Register
#define PIO_BSR         (AT91_CAST(AT91_REG *) 	0x00000074) // (PIO_BSR) Select B Register
#define PIO_ABSR        (AT91_CAST(AT91_REG *) 	0x00000078) // (PIO_ABSR) AB Select Status Register
#define PIO_OWER        (AT91_CAST(AT91_REG *) 	0x000000A0) // (PIO_OWER) Output Write Enable Register
#define PIO_OWDR        (AT91_CAST(AT91_REG *) 	0x000000A4) // (PIO_OWDR) Output Write Disable Register
#define PIO_OWSR        (AT91_CAST(AT91_REG *) 	0x000000A8) // (PIO_OWSR) Output Write Status Register

#endif

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Clock Generator Controler
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_CKGR {
	AT91_REG	 CKGR_MOR; 	// Main Oscillator Register
	AT91_REG	 CKGR_MCFR; 	// Main Clock  Frequency Register
	AT91_REG	 CKGR_PLLAR; 	// PLL A Register
	AT91_REG	 CKGR_PLLBR; 	// PLL B Register
} AT91S_CKGR, *AT91PS_CKGR;
#else
#define CKGR_MOR        (AT91_CAST(AT91_REG *) 	0x00000000) // (CKGR_MOR) Main Oscillator Register
#define CKGR_MCFR       (AT91_CAST(AT91_REG *) 	0x00000004) // (CKGR_MCFR) Main Clock  Frequency Register
#define CKGR_PLLAR      (AT91_CAST(AT91_REG *) 	0x00000008) // (CKGR_PLLAR) PLL A Register
#define CKGR_PLLBR      (AT91_CAST(AT91_REG *) 	0x0000000C) // (CKGR_PLLBR) PLL B Register

#endif
// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- 
#define AT91C_CKGR_MOSCEN     (0x1 <<  0) // (CKGR) Main Oscillator Enable
#define AT91C_CKGR_OSCBYPASS  (0x1 <<  1) // (CKGR) Main Oscillator Bypass
#define AT91C_CKGR_OSCOUNT    (0xFF <<  8) // (CKGR) Main Oscillator Start-up Time
// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- 
#define AT91C_CKGR_MAINF      (0xFFFF <<  0) // (CKGR) Main Clock Frequency
#define AT91C_CKGR_MAINRDY    (0x1 << 16) // (CKGR) Main Clock Ready
// -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- 
#define AT91C_CKGR_DIVA       (0xFF <<  0) // (CKGR) Divider A Selected
#define 	AT91C_CKGR_DIVA_0                    (0x0) // (CKGR) Divider A output is 0
#define 	AT91C_CKGR_DIVA_BYPASS               (0x1) // (CKGR) Divider A is bypassed
#define AT91C_CKGR_PLLACOUNT  (0x3F <<  8) // (CKGR) PLL A Counter
#define AT91C_CKGR_OUTA       (0x3 << 14) // (CKGR) PLL A Output Frequency Range
#define 	AT91C_CKGR_OUTA_0                    (0x0 << 14) // (CKGR) Please refer to the PLLA datasheet
#define 	AT91C_CKGR_OUTA_1                    (0x1 << 14) // (CKGR) Please refer to the PLLA datasheet
#define 	AT91C_CKGR_OUTA_2                    (0x2 << 14) // (CKGR) Please refer to the PLLA datasheet
#define 	AT91C_CKGR_OUTA_3                    (0x3 << 14) // (CKGR) Please refer to the PLLA datasheet
#define AT91C_CKGR_MULA       (0x7FF << 16) // (CKGR) PLL A Multiplier
#define AT91C_CKGR_SRCA       (0x1 << 29) // (CKGR) 
// -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- 
#define AT91C_CKGR_DIVB       (0xFF <<  0) // (CKGR) Divider B Selected
#define 	AT91C_CKGR_DIVB_0                    (0x0) // (CKGR) Divider B output is 0
#define 	AT91C_CKGR_DIVB_BYPASS               (0x1) // (CKGR) Divider B is bypassed
#define AT91C_CKGR_PLLBCOUNT  (0x3F <<  8) // (CKGR) PLL B Counter
#define AT91C_CKGR_OUTB       (0x3 << 14) // (CKGR) PLL B Output Frequency Range
#define 	AT91C_CKGR_OUTB_0                    (0x0 << 14) // (CKGR) Please refer to the PLLB datasheet
#define 	AT91C_CKGR_OUTB_1                    (0x1 << 14) // (CKGR) Please refer to the PLLB datasheet
#define 	AT91C_CKGR_OUTB_2                    (0x2 << 14) // (CKGR) Please refer to the PLLB datasheet
#define 	AT91C_CKGR_OUTB_3                    (0x3 << 14) // (CKGR) Please refer to the PLLB datasheet
#define AT91C_CKGR_MULB       (0x7FF << 16) // (CKGR) PLL B Multiplier
#define AT91C_CKGR_USBDIV     (0x3 << 28) // (CKGR) Divider for USB Clocks
#define 	AT91C_CKGR_USBDIV_0                    (0x0 << 28) // (CKGR) Divider output is PLL clock output
#define 	AT91C_CKGR_USBDIV_1                    (0x1 << 28) // (CKGR) Divider output is PLL clock output divided by 2
#define 	AT91C_CKGR_USBDIV_2                    (0x2 << 28) // (CKGR) Divider output is PLL clock output divided by 4

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Power Management Controler
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_PMC {
	AT91_REG	 PMC_SCER; 	// System Clock Enable Register
	AT91_REG	 PMC_SCDR; 	// System Clock Disable Register
	AT91_REG	 PMC_SCSR; 	// System Clock Status Register
	AT91_REG	 Reserved0[1]; 	// 
	AT91_REG	 PMC_PCER; 	// Peripheral Clock Enable Register
	AT91_REG	 PMC_PCDR; 	// Peripheral Clock Disable Register
	AT91_REG	 PMC_PCSR; 	// Peripheral Clock Status Register
	AT91_REG	 Reserved1[1]; 	// 
	AT91_REG	 PMC_MOR; 	// Main Oscillator Register
	AT91_REG	 PMC_MCFR; 	// Main Clock  Frequency Register
	AT91_REG	 PMC_PLLAR; 	// PLL A Register
	AT91_REG	 PMC_PLLBR; 	// PLL B Register
	AT91_REG	 PMC_MCKR; 	// Master Clock Register
	AT91_REG	 Reserved2[3]; 	// 
	AT91_REG	 PMC_PCKR[8]; 	// Programmable Clock Register
	AT91_REG	 PMC_IER; 	// Interrupt Enable Register
	AT91_REG	 PMC_IDR; 	// Interrupt Disable Register
	AT91_REG	 PMC_SR; 	// Status Register
	AT91_REG	 PMC_IMR; 	// Interrupt Mask Register
} AT91S_PMC, *AT91PS_PMC;
#else
#define PMC_SCER        (AT91_CAST(AT91_REG *) 	0x00000000) // (PMC_SCER) System Clock Enable Register
#define PMC_SCDR        (AT91_CAST(AT91_REG *) 	0x00000004) // (PMC_SCDR) System Clock Disable Register
#define PMC_SCSR        (AT91_CAST(AT91_REG *) 	0x00000008) // (PMC_SCSR) System Clock Status Register
#define PMC_PCER        (AT91_CAST(AT91_REG *) 	0x00000010) // (PMC_PCER) Peripheral Clock Enable Register
#define PMC_PCDR        (AT91_CAST(AT91_REG *) 	0x00000014) // (PMC_PCDR) Peripheral Clock Disable Register
#define PMC_PCSR        (AT91_CAST(AT91_REG *) 	0x00000018) // (PMC_PCSR) Peripheral Clock Status Register
#define PMC_MCKR        (AT91_CAST(AT91_REG *) 	0x00000030) // (PMC_MCKR) Master Clock Register
#define PMC_PCKR        (AT91_CAST(AT91_REG *) 	0x00000040) // (PMC_PCKR) Programmable Clock Register
#define PMC_IER         (AT91_CAST(AT91_REG *) 	0x00000060) // (PMC_IER) Interrupt Enable Register
#define PMC_IDR         (AT91_CAST(AT91_REG *) 	0x00000064) // (PMC_IDR) Interrupt Disable Register
#define PMC_SR          (AT91_CAST(AT91_REG *) 	0x00000068) // (PMC_SR) Status Register
#define PMC_IMR         (AT91_CAST(AT91_REG *) 	0x0000006C) // (PMC_IMR) Interrupt Mask Register

#endif
// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- 
#define AT91C_PMC_PCK         (0x1 <<  0) // (PMC) Processor Clock
#define AT91C_PMC_OTG         (0x1 <<  5) // (PMC) USB OTG Clock
#define AT91C_PMC_UHP         (0x1 <<  6) // (PMC) USB Host Port Clock
#define AT91C_PMC_UDP         (0x1 <<  7) // (PMC) USB Device Port Clock
#define AT91C_PMC_PCK0        (0x1 <<  8) // (PMC) Programmable Clock Output
#define AT91C_PMC_PCK1        (0x1 <<  9) // (PMC) Programmable Clock Output
#define AT91C_PMC_PCK2        (0x1 << 10) // (PMC) Programmable Clock Output
#define AT91C_PMC_PCK3        (0x1 << 11) // (PMC) Programmable Clock Output
// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- 
// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- 
// -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register -------- 
// -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register -------- 
// -------- CKGR_PLLAR : (PMC Offset: 0x28) PLL A Register -------- 
// -------- CKGR_PLLBR : (PMC Offset: 0x2c) PLL B Register -------- 
// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- 
#define AT91C_PMC_CSS         (0x3 <<  0) // (PMC) Programmable Clock Selection
#define 	AT91C_PMC_CSS_SLOW_CLK             (0x0) // (PMC) Slow Clock is selected
#define 	AT91C_PMC_CSS_MAIN_CLK             (0x1) // (PMC) Main Clock is selected
#define 	AT91C_PMC_CSS_PLLA_CLK             (0x2) // (PMC) Clock from PLL A is selected
#define 	AT91C_PMC_CSS_PLLB_CLK             (0x3) // (PMC) Clock from PLL B is selected
#define AT91C_PMC_PRES        (0x7 <<  2) // (PMC) Programmable Clock Prescaler
#define 	AT91C_PMC_PRES_CLK                  (0x0 <<  2) // (PMC) Selected clock
#define 	AT91C_PMC_PRES_CLK_2                (0x1 <<  2) // (PMC) Selected clock divided by 2
#define 	AT91C_PMC_PRES_CLK_4                (0x2 <<  2) // (PMC) Selected clock divided by 4
#define 	AT91C_PMC_PRES_CLK_8                (0x3 <<  2) // (PMC) Selected clock divided by 8
#define 	AT91C_PMC_PRES_CLK_16               (0x4 <<  2) // (PMC) Selected clock divided by 16
#define 	AT91C_PMC_PRES_CLK_32               (0x5 <<  2) // (PMC) Selected clock divided by 32
#define 	AT91C_PMC_PRES_CLK_64               (0x6 <<  2) // (PMC) Selected clock divided by 64
#define AT91C_PMC_MDIV        (0x3 <<  8) // (PMC) Master Clock Division
#define 	AT91C_PMC_MDIV_1                    (0x0 <<  8) // (PMC) The master clock and the processor clock are the same
#define 	AT91C_PMC_MDIV_2                    (0x1 <<  8) // (PMC) The processor clock is twice as fast as the master clock
#define 	AT91C_PMC_MDIV_3                    (0x2 <<  8) // (PMC) The processor clock is four times faster than the master clock
// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- 
// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- 
#define AT91C_PMC_MOSCS       (0x1 <<  0) // (PMC) MOSC Status/Enable/Disable/Mask
#define AT91C_PMC_LOCKA       (0x1 <<  1) // (PMC) PLL A Status/Enable/Disable/Mask
#define AT91C_PMC_LOCKB       (0x1 <<  2) // (PMC) PLL B Status/Enable/Disable/Mask
#define AT91C_PMC_MCKRDY      (0x1 <<  3) // (PMC) Master Clock Status/Enable/Disable/Mask
#define AT91C_PMC_PCK0RDY     (0x1 <<  8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask
#define AT91C_PMC_PCK1RDY     (0x1 <<  9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask
#define AT91C_PMC_PCK2RDY     (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask
#define AT91C_PMC_PCK3RDY     (0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask
// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- 
// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- 
// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Reset Controller Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_RSTC {
	AT91_REG	 RSTC_RCR; 	// Reset Control Register
	AT91_REG	 RSTC_RSR; 	// Reset Status Register
	AT91_REG	 RSTC_RMR; 	// Reset Mode Register
	AT91_REG	 Reserved0[60]; 	// 
	AT91_REG	 RSTC_VER; 	// Version Register
} AT91S_RSTC, *AT91PS_RSTC;
#else
#define RSTC_RCR        (AT91_CAST(AT91_REG *) 	0x00000000) // (RSTC_RCR) Reset Control Register
#define RSTC_RSR        (AT91_CAST(AT91_REG *) 	0x00000004) // (RSTC_RSR) Reset Status Register
#define RSTC_RMR        (AT91_CAST(AT91_REG *) 	0x00000008) // (RSTC_RMR) Reset Mode Register
#define RSTC_VER        (AT91_CAST(AT91_REG *) 	0x000000FC) // (RSTC_VER) Version Register

#endif
// -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register -------- 
#define AT91C_RSTC_PROCRST    (0x1 <<  0) // (RSTC) Processor Reset
#define AT91C_RSTC_ICERST     (0x1 <<  1) // (RSTC) ICE Interface Reset
#define AT91C_RSTC_PERRST     (0x1 <<  2) // (RSTC) Peripheral Reset
#define AT91C_RSTC_EXTRST     (0x1 <<  3) // (RSTC) External Reset
#define AT91C_RSTC_KEY        (0xFF << 24) // (RSTC) Password
// -------- RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register -------- 
#define AT91C_RSTC_URSTS      (0x1 <<  0) // (RSTC) User Reset Status
#define AT91C_RSTC_RSTTYP     (0x7 <<  8) // (RSTC) Reset Type
#define 	AT91C_RSTC_RSTTYP_GENERAL              (0x0 <<  8) // (RSTC) General reset. Both VDDCORE and VDDBU rising.
#define 	AT91C_RSTC_RSTTYP_WAKEUP               (0x1 <<  8) // (RSTC) WakeUp Reset. VDDCORE rising.
#define 	AT91C_RSTC_RSTTYP_WATCHDOG             (0x2 <<  8) // (RSTC) Watchdog Reset. Watchdog overflow occured.
#define 	AT91C_RSTC_RSTTYP_SOFTWARE             (0x3 <<  8) // (RSTC) Software Reset. Processor reset required by the software.
#define 	AT91C_RSTC_RSTTYP_USER                 (0x4 <<  8) // (RSTC) User Reset. NRST pin detected low.
#define AT91C_RSTC_NRSTL      (0x1 << 16) // (RSTC) NRST pin level
#define AT91C_RSTC_SRCMP      (0x1 << 17) // (RSTC) Software Reset Command in Progress.
// -------- RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register -------- 
#define AT91C_RSTC_URSTEN     (0x1 <<  0) // (RSTC) User Reset Enable
#define AT91C_RSTC_URSTIEN    (0x1 <<  4) // (RSTC) User Reset Interrupt Enable
#define AT91C_RSTC_ERSTL      (0xF <<  8) // (RSTC) User Reset Enable

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Shut Down Controller Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_SHDWC {
	AT91_REG	 SHDWC_SHCR; 	// Shut Down Control Register
	AT91_REG	 SHDWC_SHMR; 	// Shut Down Mode Register
	AT91_REG	 SHDWC_SHSR; 	// Shut Down Status Register
} AT91S_SHDWC, *AT91PS_SHDWC;
#else
#define SHDWC_SHCR      (AT91_CAST(AT91_REG *) 	0x00000000) // (SHDWC_SHCR) Shut Down Control Register
#define SHDWC_SHMR      (AT91_CAST(AT91_REG *) 	0x00000004) // (SHDWC_SHMR) Shut Down Mode Register
#define SHDWC_SHSR      (AT91_CAST(AT91_REG *) 	0x00000008) // (SHDWC_SHSR) Shut Down Status Register

#endif
// -------- SHDWC_SHCR : (SHDWC Offset: 0x0) Shut Down Control Register -------- 
#define AT91C_SHDWC_SHDW      (0x1 <<  0) // (SHDWC) Processor Reset
#define AT91C_SHDWC_KEY       (0xFF << 24) // (SHDWC) Shut down KEY Password
// -------- SHDWC_SHMR : (SHDWC Offset: 0x4) Shut Down Mode Register -------- 
#define AT91C_SHDWC_WKMODE0   (0x3 <<  0) // (SHDWC) Wake Up 0 Mode Selection
#define 	AT91C_SHDWC_WKMODE0_NONE                 (0x0) // (SHDWC) None. No detection is performed on the wake up input.
#define 	AT91C_SHDWC_WKMODE0_HIGH                 (0x1) // (SHDWC) High Level.
#define 	AT91C_SHDWC_WKMODE0_LOW                  (0x2) // (SHDWC) Low Level.
#define 	AT91C_SHDWC_WKMODE0_ANYLEVEL             (0x3) // (SHDWC) Any level change.
#define AT91C_SHDWC_CPTWK0    (0xF <<  4) // (SHDWC) Counter On Wake Up 0
#define AT91C_SHDWC_WKMODE1   (0x3 <<  8) // (SHDWC) Wake Up 1 Mode Selection
#define 	AT91C_SHDWC_WKMODE1_NONE                 (0x0 <<  8) // (SHDWC) None. No detection is performed on the wake up input.
#define 	AT91C_SHDWC_WKMODE1_HIGH                 (0x1 <<  8) // (SHDWC) High Level.
#define 	AT91C_SHDWC_WKMODE1_LOW                  (0x2 <<  8) // (SHDWC) Low Level.
#define 	AT91C_SHDWC_WKMODE1_ANYLEVEL             (0x3 <<  8) // (SHDWC) Any level change.
#define AT91C_SHDWC_CPTWK1    (0xF << 12) // (SHDWC) Counter On Wake Up 1
#define AT91C_SHDWC_RTTWKEN   (0x1 << 16) // (SHDWC) Real Time Timer Wake Up Enable
#define AT91C_SHDWC_RTCWKEN   (0x1 << 17) // (SHDWC) Real Time Clock Wake Up Enable
// -------- SHDWC_SHSR : (SHDWC Offset: 0x8) Shut Down Status Register -------- 
#define AT91C_SHDWC_WAKEUP0   (0x1 <<  0) // (SHDWC) Wake Up 0 Status
#define AT91C_SHDWC_WAKEUP1   (0x1 <<  1) // (SHDWC) Wake Up 1 Status
#define AT91C_SHDWC_FWKUP     (0x1 <<  2) // (SHDWC) Force Wake Up Status
#define AT91C_SHDWC_RTTWK     (0x1 << 16) // (SHDWC) Real Time Timer wake Up
#define AT91C_SHDWC_RTCWK     (0x1 << 17) // (SHDWC) Real Time Clock wake Up

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Real Time Timer Controller Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_RTTC {
	AT91_REG	 RTTC_RTMR; 	// Real-time Mode Register
	AT91_REG	 RTTC_RTAR; 	// Real-time Alarm Register
	AT91_REG	 RTTC_RTVR; 	// Real-time Value Register
	AT91_REG	 RTTC_RTSR; 	// Real-time Status Register
} AT91S_RTTC, *AT91PS_RTTC;
#else
#define RTTC_RTMR       (AT91_CAST(AT91_REG *) 	0x00000000) // (RTTC_RTMR) Real-time Mode Register
#define RTTC_RTAR       (AT91_CAST(AT91_REG *) 	0x00000004) // (RTTC_RTAR) Real-time Alarm Register
#define RTTC_RTVR       (AT91_CAST(AT91_REG *) 	0x00000008) // (RTTC_RTVR) Real-time Value Register
#define RTTC_RTSR       (AT91_CAST(AT91_REG *) 	0x0000000C) // (RTTC_RTSR) Real-time Status Register

#endif
// -------- RTTC_RTMR : (RTTC Offset: 0x0) Real-time Mode Register -------- 
#define AT91C_RTTC_RTPRES     (0xFFFF <<  0) // (RTTC) Real-time Timer Prescaler Value
#define AT91C_RTTC_ALMIEN     (0x1 << 16) // (RTTC) Alarm Interrupt Enable
#define AT91C_RTTC_RTTINCIEN  (0x1 << 17) // (RTTC) Real Time Timer Increment Interrupt Enable
#define AT91C_RTTC_RTTRST     (0x1 << 18) // (RTTC) Real Time Timer Restart
// -------- RTTC_RTAR : (RTTC Offset: 0x4) Real-time Alarm Register -------- 
#define AT91C_RTTC_ALMV       (0x0 <<  0) // (RTTC) Alarm Value
// -------- RTTC_RTVR : (RTTC Offset: 0x8) Current Real-time Value Register -------- 
#define AT91C_RTTC_CRTV       (0x0 <<  0) // (RTTC) Current Real-time Value
// -------- RTTC_RTSR : (RTTC Offset: 0xc) Real-time Status Register -------- 
#define AT91C_RTTC_ALMS       (0x1 <<  0) // (RTTC) Real-time Alarm Status
#define AT91C_RTTC_RTTINC     (0x1 <<  1) // (RTTC) Real-time Timer Increment

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Periodic Interval Timer Controller Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_PITC {
	AT91_REG	 PITC_PIMR; 	// Period Interval Mode Register
	AT91_REG	 PITC_PISR; 	// Period Interval Status Register
	AT91_REG	 PITC_PIVR; 	// Period Interval Value Register
	AT91_REG	 PITC_PIIR; 	// Period Interval Image Register
} AT91S_PITC, *AT91PS_PITC;
#else
#define PITC_PIMR       (AT91_CAST(AT91_REG *) 	0x00000000) // (PITC_PIMR) Period Interval Mode Register
#define PITC_PISR       (AT91_CAST(AT91_REG *) 	0x00000004) // (PITC_PISR) Period Interval Status Register
#define PITC_PIVR       (AT91_CAST(AT91_REG *) 	0x00000008) // (PITC_PIVR) Period Interval Value Register
#define PITC_PIIR       (AT91_CAST(AT91_REG *) 	0x0000000C) // (PITC_PIIR) Period Interval Image Register

#endif
// -------- PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register -------- 
#define AT91C_PITC_PIV        (0xFFFFF <<  0) // (PITC) Periodic Interval Value
#define AT91C_PITC_PITEN      (0x1 << 24) // (PITC) Periodic Interval Timer Enabled
#define AT91C_PITC_PITIEN     (0x1 << 25) // (PITC) Periodic Interval Timer Interrupt Enable
// -------- PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register -------- 
#define AT91C_PITC_PITS       (0x1 <<  0) // (PITC) Periodic Interval Timer Status
// -------- PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register -------- 
#define AT91C_PITC_CPIV       (0xFFFFF <<  0) // (PITC) Current Periodic Interval Value
#define AT91C_PITC_PICNT      (0xFFF << 20) // (PITC) Periodic Interval Counter
// -------- PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Watchdog Timer Controller Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_WDTC {
	AT91_REG	 WDTC_WDCR; 	// Watchdog Control Register
	AT91_REG	 WDTC_WDMR; 	// Watchdog Mode Register
	AT91_REG	 WDTC_WDSR; 	// Watchdog Status Register
} AT91S_WDTC, *AT91PS_WDTC;
#else
#define WDTC_WDCR       (AT91_CAST(AT91_REG *) 	0x00000000) // (WDTC_WDCR) Watchdog Control Register
#define WDTC_WDMR       (AT91_CAST(AT91_REG *) 	0x00000004) // (WDTC_WDMR) Watchdog Mode Register
#define WDTC_WDSR       (AT91_CAST(AT91_REG *) 	0x00000008) // (WDTC_WDSR) Watchdog Status Register

#endif
// -------- WDTC_WDCR : (WDTC Offset: 0x0) Periodic Interval Image Register -------- 
#define AT91C_WDTC_WDRSTT     (0x1 <<  0) // (WDTC) Watchdog Restart
#define AT91C_WDTC_KEY        (0xFF << 24) // (WDTC) Watchdog KEY Password
// -------- WDTC_WDMR : (WDTC Offset: 0x4) Watchdog Mode Register -------- 
#define AT91C_WDTC_WDV        (0xFFF <<  0) // (WDTC) Watchdog Timer Restart
#define AT91C_WDTC_WDFIEN     (0x1 << 12) // (WDTC) Watchdog Fault Interrupt Enable
#define AT91C_WDTC_WDRSTEN    (0x1 << 13) // (WDTC) Watchdog Reset Enable
#define AT91C_WDTC_WDRPROC    (0x1 << 14) // (WDTC) Watchdog Timer Restart
#define AT91C_WDTC_WDDIS      (0x1 << 15) // (WDTC) Watchdog Disable
#define AT91C_WDTC_WDD        (0xFFF << 16) // (WDTC) Watchdog Delta Value
#define AT91C_WDTC_WDDBGHLT   (0x1 << 28) // (WDTC) Watchdog Debug Halt
#define AT91C_WDTC_WDIDLEHLT  (0x1 << 29) // (WDTC) Watchdog Idle Halt
// -------- WDTC_WDSR : (WDTC Offset: 0x8) Watchdog Status Register -------- 
#define AT91C_WDTC_WDUNF      (0x1 <<  0) // (WDTC) Watchdog Underflow
#define AT91C_WDTC_WDERR      (0x1 <<  1) // (WDTC) Watchdog Error

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_TC {
	AT91_REG	 TC_CCR; 	// Channel Control Register
	AT91_REG	 TC_CMR; 	// Channel Mode Register (Capture Mode / Waveform Mode)
	AT91_REG	 Reserved0[2]; 	// 
	AT91_REG	 TC_CV; 	// Counter Value
	AT91_REG	 TC_RA; 	// Register A
	AT91_REG	 TC_RB; 	// Register B
	AT91_REG	 TC_RC; 	// Register C
	AT91_REG	 TC_SR; 	// Status Register
	AT91_REG	 TC_IER; 	// Interrupt Enable Register
	AT91_REG	 TC_IDR; 	// Interrupt Disable Register
	AT91_REG	 TC_IMR; 	// Interrupt Mask Register
} AT91S_TC, *AT91PS_TC;
#else
#define TC_CCR          (AT91_CAST(AT91_REG *) 	0x00000000) // (TC_CCR) Channel Control Register
#define TC_CMR          (AT91_CAST(AT91_REG *) 	0x00000004) // (TC_CMR) Channel Mode Register (Capture Mode / Waveform Mode)
#define TC_CV           (AT91_CAST(AT91_REG *) 	0x00000010) // (TC_CV) Counter Value
#define TC_RA           (AT91_CAST(AT91_REG *) 	0x00000014) // (TC_RA) Register A
#define TC_RB           (AT91_CAST(AT91_REG *) 	0x00000018) // (TC_RB) Register B
#define TC_RC           (AT91_CAST(AT91_REG *) 	0x0000001C) // (TC_RC) Register C
#define TC_SR           (AT91_CAST(AT91_REG *) 	0x00000020) // (TC_SR) Status Register
#define TC_IER          (AT91_CAST(AT91_REG *) 	0x00000024) // (TC_IER) Interrupt Enable Register
#define TC_IDR          (AT91_CAST(AT91_REG *) 	0x00000028) // (TC_IDR) Interrupt Disable Register
#define TC_IMR          (AT91_CAST(AT91_REG *) 	0x0000002C) // (TC_IMR) Interrupt Mask Register

#endif
// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- 
#define AT91C_TC_CLKEN        (0x1 <<  0) // (TC) Counter Clock Enable Command
#define AT91C_TC_CLKDIS       (0x1 <<  1) // (TC) Counter Clock Disable Command
#define AT91C_TC_SWTRG        (0x1 <<  2) // (TC) Software Trigger Command
// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- 
#define AT91C_TC_CLKS         (0x7 <<  0) // (TC) Clock Selection
#define 	AT91C_TC_CLKS_TIMER_DIV1_CLOCK     (0x0) // (TC) Clock selected: TIMER_DIV1_CLOCK
#define 	AT91C_TC_CLKS_TIMER_DIV2_CLOCK     (0x1) // (TC) Clock selected: TIMER_DIV2_CLOCK
#define 	AT91C_TC_CLKS_TIMER_DIV3_CLOCK     (0x2) // (TC) Clock selected: TIMER_DIV3_CLOCK
#define 	AT91C_TC_CLKS_TIMER_DIV4_CLOCK     (0x3) // (TC) Clock selected: TIMER_DIV4_CLOCK
#define 	AT91C_TC_CLKS_TIMER_DIV5_CLOCK     (0x4) // (TC) Clock selected: TIMER_DIV5_CLOCK
#define 	AT91C_TC_CLKS_XC0                  (0x5) // (TC) Clock selected: XC0
#define 	AT91C_TC_CLKS_XC1                  (0x6) // (TC) Clock selected: XC1
#define 	AT91C_TC_CLKS_XC2                  (0x7) // (TC) Clock selected: XC2
#define AT91C_TC_CLKI         (0x1 <<  3) // (TC) Clock Invert
#define AT91C_TC_BURST        (0x3 <<  4) // (TC) Burst Signal Selection
#define 	AT91C_TC_BURST_NONE                 (0x0 <<  4) // (TC) The clock is not gated by an external signal
#define 	AT91C_TC_BURST_XC0                  (0x1 <<  4) // (TC) XC0 is ANDed with the selected clock
#define 	AT91C_TC_BURST_XC1                  (0x2 <<  4) // (TC) XC1 is ANDed with the selected clock
#define 	AT91C_TC_BURST_XC2                  (0x3 <<  4) // (TC) XC2 is ANDed with the selected clock
#define AT91C_TC_CPCSTOP      (0x1 <<  6) // (TC) Counter Clock Stopped with RC Compare
#define AT91C_TC_LDBSTOP      (0x1 <<  6) // (TC) Counter Clock Stopped with RB Loading
#define AT91C_TC_CPCDIS       (0x1 <<  7) // (TC) Counter Clock Disable with RC Compare
#define AT91C_TC_LDBDIS       (0x1 <<  7) // (TC) Counter Clock Disabled with RB Loading
#define AT91C_TC_ETRGEDG      (0x3 <<  8) // (TC) External Trigger Edge Selection
#define 	AT91C_TC_ETRGEDG_NONE                 (0x0 <<  8) // (TC) Edge: None
#define 	AT91C_TC_ETRGEDG_RISING               (0x1 <<  8) // (TC) Edge: rising edge
#define 	AT91C_TC_ETRGEDG_FALLING              (0x2 <<  8) // (TC) Edge: falling edge
#define 	AT91C_TC_ETRGEDG_BOTH                 (0x3 <<  8) // (TC) Edge: each edge
#define AT91C_TC_EEVTEDG      (0x3 <<  8) // (TC) External Event Edge Selection
#define 	AT91C_TC_EEVTEDG_NONE                 (0x0 <<  8) // (TC) Edge: None
#define 	AT91C_TC_EEVTEDG_RISING               (0x1 <<  8) // (TC) Edge: rising edge
#define 	AT91C_TC_EEVTEDG_FALLING              (0x2 <<  8) // (TC) Edge: falling edge
#define 	AT91C_TC_EEVTEDG_BOTH                 (0x3 <<  8) // (TC) Edge: each edge
#define AT91C_TC_EEVT         (0x3 << 10) // (TC) External Event  Selection
#define 	AT91C_TC_EEVT_TIOB                 (0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input
#define 	AT91C_TC_EEVT_XC0                  (0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output
#define 	AT91C_TC_EEVT_XC1                  (0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output
#define 	AT91C_TC_EEVT_XC2                  (0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output
#define AT91C_TC_ABETRG       (0x1 << 10) // (TC) TIOA or TIOB External Trigger Selection
#define AT91C_TC_ENETRG       (0x1 << 12) // (TC) External Event Trigger enable
#define AT91C_TC_WAVESEL      (0x3 << 13) // (TC) Waveform  Selection
#define 	AT91C_TC_WAVESEL_UP                   (0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare
#define 	AT91C_TC_WAVESEL_UPDOWN               (0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare
#define 	AT91C_TC_WAVESEL_UP_AUTO              (0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare
#define 	AT91C_TC_WAVESEL_UPDOWN_AUTO          (0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare
#define AT91C_TC_CPCTRG       (0x1 << 14) // (TC) RC Compare Trigger Enable
#define AT91C_TC_WAVE         (0x1 << 15) // (TC) 
#define AT91C_TC_ACPA         (0x3 << 16) // (TC) RA Compare Effect on TIOA
#define 	AT91C_TC_ACPA_NONE                 (0x0 << 16) // (TC) Effect: none
#define 	AT91C_TC_ACPA_SET                  (0x1 << 16) // (TC) Effect: set
#define 	AT91C_TC_ACPA_CLEAR                (0x2 << 16) // (TC) Effect: clear
#define 	AT91C_TC_ACPA_TOGGLE               (0x3 << 16) // (TC) Effect: toggle
#define AT91C_TC_LDRA         (0x3 << 16) // (TC) RA Loading Selection
#define 	AT91C_TC_LDRA_NONE                 (0x0 << 16) // (TC) Edge: None
#define 	AT91C_TC_LDRA_RISING               (0x1 << 16) // (TC) Edge: rising edge of TIOA
#define 	AT91C_TC_LDRA_FALLING              (0x2 << 16) // (TC) Edge: falling edge of TIOA
#define 	AT91C_TC_LDRA_BOTH                 (0x3 << 16) // (TC) Edge: each edge of TIOA
#define AT91C_TC_ACPC         (0x3 << 18) // (TC) RC Compare Effect on TIOA
#define 	AT91C_TC_ACPC_NONE                 (0x0 << 18) // (TC) Effect: none
#define 	AT91C_TC_ACPC_SET                  (0x1 << 18) // (TC) Effect: set
#define 	AT91C_TC_ACPC_CLEAR                (0x2 << 18) // (TC) Effect: clear
#define 	AT91C_TC_ACPC_TOGGLE               (0x3 << 18) // (TC) Effect: toggle
#define AT91C_TC_LDRB         (0x3 << 18) // (TC) RB Loading Selection
#define 	AT91C_TC_LDRB_NONE                 (0x0 << 18) // (TC) Edge: None
#define 	AT91C_TC_LDRB_RISING               (0x1 << 18) // (TC) Edge: rising edge of TIOA
#define 	AT91C_TC_LDRB_FALLING              (0x2 << 18) // (TC) Edge: falling edge of TIOA
#define 	AT91C_TC_LDRB_BOTH                 (0x3 << 18) // (TC) Edge: each edge of TIOA
#define AT91C_TC_AEEVT        (0x3 << 20) // (TC) External Event Effect on TIOA
#define 	AT91C_TC_AEEVT_NONE                 (0x0 << 20) // (TC) Effect: none
#define 	AT91C_TC_AEEVT_SET                  (0x1 << 20) // (TC) Effect: set
#define 	AT91C_TC_AEEVT_CLEAR                (0x2 << 20) // (TC) Effect: clear
#define 	AT91C_TC_AEEVT_TOGGLE               (0x3 << 20) // (TC) Effect: toggle
#define AT91C_TC_ASWTRG       (0x3 << 22) // (TC) Software Trigger Effect on TIOA
#define 	AT91C_TC_ASWTRG_NONE                 (0x0 << 22) // (TC) Effect: none
#define 	AT91C_TC_ASWTRG_SET                  (0x1 << 22) // (TC) Effect: set
#define 	AT91C_TC_ASWTRG_CLEAR                (0x2 << 22) // (TC) Effect: clear
#define 	AT91C_TC_ASWTRG_TOGGLE               (0x3 << 22) // (TC) Effect: toggle
#define AT91C_TC_BCPB         (0x3 << 24) // (TC) RB Compare Effect on TIOB
#define 	AT91C_TC_BCPB_NONE                 (0x0 << 24) // (TC) Effect: none
#define 	AT91C_TC_BCPB_SET                  (0x1 << 24) // (TC) Effect: set
#define 	AT91C_TC_BCPB_CLEAR                (0x2 << 24) // (TC) Effect: clear
#define 	AT91C_TC_BCPB_TOGGLE               (0x3 << 24) // (TC) Effect: toggle
#define AT91C_TC_BCPC         (0x3 << 26) // (TC) RC Compare Effect on TIOB
#define 	AT91C_TC_BCPC_NONE                 (0x0 << 26) // (TC) Effect: none
#define 	AT91C_TC_BCPC_SET                  (0x1 << 26) // (TC) Effect: set
#define 	AT91C_TC_BCPC_CLEAR                (0x2 << 26) // (TC) Effect: clear
#define 	AT91C_TC_BCPC_TOGGLE               (0x3 << 26) // (TC) Effect: toggle
#define AT91C_TC_BEEVT        (0x3 << 28) // (TC) External Event Effect on TIOB
#define 	AT91C_TC_BEEVT_NONE                 (0x0 << 28) // (TC) Effect: none
#define 	AT91C_TC_BEEVT_SET                  (0x1 << 28) // (TC) Effect: set
#define 	AT91C_TC_BEEVT_CLEAR                (0x2 << 28) // (TC) Effect: clear
#define 	AT91C_TC_BEEVT_TOGGLE               (0x3 << 28) // (TC) Effect: toggle
#define AT91C_TC_BSWTRG       (0x3 << 30) // (TC) Software Trigger Effect on TIOB
#define 	AT91C_TC_BSWTRG_NONE                 (0x0 << 30) // (TC) Effect: none
#define 	AT91C_TC_BSWTRG_SET                  (0x1 << 30) // (TC) Effect: set
#define 	AT91C_TC_BSWTRG_CLEAR                (0x2 << 30) // (TC) Effect: clear
#define 	AT91C_TC_BSWTRG_TOGGLE               (0x3 << 30) // (TC) Effect: toggle
// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- 
#define AT91C_TC_COVFS        (0x1 <<  0) // (TC) Counter Overflow
#define AT91C_TC_LOVRS        (0x1 <<  1) // (TC) Load Overrun
#define AT91C_TC_CPAS         (0x1 <<  2) // (TC) RA Compare
#define AT91C_TC_CPBS         (0x1 <<  3) // (TC) RB Compare
#define AT91C_TC_CPCS         (0x1 <<  4) // (TC) RC Compare
#define AT91C_TC_LDRAS        (0x1 <<  5) // (TC) RA Loading
#define AT91C_TC_LDRBS        (0x1 <<  6) // (TC) RB Loading
#define AT91C_TC_ETRGS        (0x1 <<  7) // (TC) External Trigger
#define AT91C_TC_CLKSTA       (0x1 << 16) // (TC) Clock Enabling
#define AT91C_TC_MTIOA        (0x1 << 17) // (TC) TIOA Mirror
#define AT91C_TC_MTIOB        (0x1 << 18) // (TC) TIOA Mirror
// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- 
// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- 
// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Timer Counter Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_TCB {
	AT91S_TC	 TCB_TC0; 	// TC Channel 0
	AT91_REG	 Reserved0[4]; 	// 
	AT91S_TC	 TCB_TC1; 	// TC Channel 1
	AT91_REG	 Reserved1[4]; 	// 
	AT91S_TC	 TCB_TC2; 	// TC Channel 2
	AT91_REG	 Reserved2[4]; 	// 
	AT91_REG	 TCB_BCR; 	// TC Block Control Register
	AT91_REG	 TCB_BMR; 	// TC Block Mode Register
	AT91_REG	 Reserved3[9]; 	// 
	AT91_REG	 TCB_ADDRSIZE; 	// TC ADDRSIZE REGISTER 
	AT91_REG	 TCB_IPNAME1; 	// TC IPNAME1 REGISTER 
	AT91_REG	 TCB_IPNAME2; 	// TC IPNAME2 REGISTER 
	AT91_REG	 TCB_FEATURES; 	// TC FEATURES REGISTER 
	AT91_REG	 TCB_VER; 	//  Version Register
} AT91S_TCB, *AT91PS_TCB;
#else
#define TCB_BCR         (AT91_CAST(AT91_REG *) 	0x000000C0) // (TCB_BCR) TC Block Control Register
#define TCB_BMR         (AT91_CAST(AT91_REG *) 	0x000000C4) // (TCB_BMR) TC Block Mode Register
#define TC_ADDRSIZE     (AT91_CAST(AT91_REG *) 	0x000000EC) // (TC_ADDRSIZE) TC ADDRSIZE REGISTER 
#define TC_IPNAME1      (AT91_CAST(AT91_REG *) 	0x000000F0) // (TC_IPNAME1) TC IPNAME1 REGISTER 
#define TC_IPNAME2      (AT91_CAST(AT91_REG *) 	0x000000F4) // (TC_IPNAME2) TC IPNAME2 REGISTER 
#define TC_FEATURES     (AT91_CAST(AT91_REG *) 	0x000000F8) // (TC_FEATURES) TC FEATURES REGISTER 
#define TC_VER          (AT91_CAST(AT91_REG *) 	0x000000FC) // (TC_VER)  Version Register

#endif
// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- 
#define AT91C_TCB_SYNC        (0x1 <<  0) // (TCB) Synchro Command
// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- 
#define AT91C_TCB_TC0XC0S     (0x3 <<  0) // (TCB) External Clock Signal 0 Selection
#define 	AT91C_TCB_TC0XC0S_TCLK0                (0x0) // (TCB) TCLK0 connected to XC0
#define 	AT91C_TCB_TC0XC0S_NONE                 (0x1) // (TCB) None signal connected to XC0
#define 	AT91C_TCB_TC0XC0S_TIOA1                (0x2) // (TCB) TIOA1 connected to XC0
#define 	AT91C_TCB_TC0XC0S_TIOA2                (0x3) // (TCB) TIOA2 connected to XC0
#define AT91C_TCB_TC1XC1S     (0x3 <<  2) // (TCB) External Clock Signal 1 Selection
#define 	AT91C_TCB_TC1XC1S_TCLK1                (0x0 <<  2) // (TCB) TCLK1 connected to XC1
#define 	AT91C_TCB_TC1XC1S_NONE                 (0x1 <<  2) // (TCB) None signal connected to XC1
#define 	AT91C_TCB_TC1XC1S_TIOA0                (0x2 <<  2) // (TCB) TIOA0 connected to XC1
#define 	AT91C_TCB_TC1XC1S_TIOA2                (0x3 <<  2) // (TCB) TIOA2 connected to XC1
#define AT91C_TCB_TC2XC2S     (0x3 <<  4) // (TCB) External Clock Signal 2 Selection
#define 	AT91C_TCB_TC2XC2S_TCLK2                (0x0 <<  4) // (TCB) TCLK2 connected to XC2
#define 	AT91C_TCB_TC2XC2S_NONE                 (0x1 <<  4) // (TCB) None signal connected to XC2
#define 	AT91C_TCB_TC2XC2S_TIOA0                (0x2 <<  4) // (TCB) TIOA0 connected to XC2
#define 	AT91C_TCB_TC2XC2S_TIOA1                (0x3 <<  4) // (TCB) TIOA2 connected to XC2

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Multimedia Card Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_MCI {
	AT91_REG	 MCI_CR; 	// MCI Control Register
	AT91_REG	 MCI_MR; 	// MCI Mode Register
	AT91_REG	 MCI_DTOR; 	// MCI Data Timeout Register
	AT91_REG	 MCI_SDCR; 	// MCI SD Card Register
	AT91_REG	 MCI_ARGR; 	// MCI Argument Register
	AT91_REG	 MCI_CMDR; 	// MCI Command Register
	AT91_REG	 MCI_BLKR; 	// MCI Block Register
	AT91_REG	 Reserved0[1]; 	// 
	AT91_REG	 MCI_RSPR[4]; 	// MCI Response Register
	AT91_REG	 MCI_RDR; 	// MCI Receive Data Register
	AT91_REG	 MCI_TDR; 	// MCI Transmit Data Register
	AT91_REG	 Reserved1[2]; 	// 
	AT91_REG	 MCI_SR; 	// MCI Status Register
	AT91_REG	 MCI_IER; 	// MCI Interrupt Enable Register
	AT91_REG	 MCI_IDR; 	// MCI Interrupt Disable Register
	AT91_REG	 MCI_IMR; 	// MCI Interrupt Mask Register
	AT91_REG	 Reserved2[43]; 	// 
	AT91_REG	 MCI_VR; 	// MCI Version Register
	AT91_REG	 MCI_RPR; 	// Receive Pointer Register
	AT91_REG	 MCI_RCR; 	// Receive Counter Register
	AT91_REG	 MCI_TPR; 	// Transmit Pointer Register
	AT91_REG	 MCI_TCR; 	// Transmit Counter Register
	AT91_REG	 MCI_RNPR; 	// Receive Next Pointer Register
	AT91_REG	 MCI_RNCR; 	// Receive Next Counter Register
	AT91_REG	 MCI_TNPR; 	// Transmit Next Pointer Register
	AT91_REG	 MCI_TNCR; 	// Transmit Next Counter Register
	AT91_REG	 MCI_PTCR; 	// PDC Transfer Control Register
	AT91_REG	 MCI_PTSR; 	// PDC Transfer Status Register
} AT91S_MCI, *AT91PS_MCI;
#else
#define MCI_CR          (AT91_CAST(AT91_REG *) 	0x00000000) // (MCI_CR) MCI Control Register
#define MCI_MR          (AT91_CAST(AT91_REG *) 	0x00000004) // (MCI_MR) MCI Mode Register
#define MCI_DTOR        (AT91_CAST(AT91_REG *) 	0x00000008) // (MCI_DTOR) MCI Data Timeout Register
#define MCI_SDCR        (AT91_CAST(AT91_REG *) 	0x0000000C) // (MCI_SDCR) MCI SD Card Register
#define MCI_ARGR        (AT91_CAST(AT91_REG *) 	0x00000010) // (MCI_ARGR) MCI Argument Register
#define MCI_CMDR        (AT91_CAST(AT91_REG *) 	0x00000014) // (MCI_CMDR) MCI Command Register
#define MCI_BLKR        (AT91_CAST(AT91_REG *) 	0x00000018) // (MCI_BLKR) MCI Block Register
#define MCI_RSPR        (AT91_CAST(AT91_REG *) 	0x00000020) // (MCI_RSPR) MCI Response Register
#define MCI_RDR         (AT91_CAST(AT91_REG *) 	0x00000030) // (MCI_RDR) MCI Receive Data Register
#define MCI_TDR         (AT91_CAST(AT91_REG *) 	0x00000034) // (MCI_TDR) MCI Transmit Data Register
#define MCI_SR          (AT91_CAST(AT91_REG *) 	0x00000040) // (MCI_SR) MCI Status Register
#define MCI_IER         (AT91_CAST(AT91_REG *) 	0x00000044) // (MCI_IER) MCI Interrupt Enable Register
#define MCI_IDR         (AT91_CAST(AT91_REG *) 	0x00000048) // (MCI_IDR) MCI Interrupt Disable Register
#define MCI_IMR         (AT91_CAST(AT91_REG *) 	0x0000004C) // (MCI_IMR) MCI Interrupt Mask Register
#define MCI_VR          (AT91_CAST(AT91_REG *) 	0x000000FC) // (MCI_VR) MCI Version Register

#endif
// -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- 
#define AT91C_MCI_MCIEN       (0x1 <<  0) // (MCI) Multimedia Interface Enable
#define 	AT91C_MCI_MCIEN_0                    (0x0) // (MCI) No effect
#define 	AT91C_MCI_MCIEN_1                    (0x1) // (MCI) Enable the MultiMedia Interface if MCIDIS is 0
#define AT91C_MCI_MCIDIS      (0x1 <<  1) // (MCI) Multimedia Interface Disable
#define 	AT91C_MCI_MCIDIS_0                    (0x0 <<  1) // (MCI) No effect
#define 	AT91C_MCI_MCIDIS_1                    (0x1 <<  1) // (MCI) Disable the MultiMedia Interface
#define AT91C_MCI_PWSEN       (0x1 <<  2) // (MCI) Power Save Mode Enable
#define 	AT91C_MCI_PWSEN_0                    (0x0 <<  2) // (MCI) No effect
#define 	AT91C_MCI_PWSEN_1                    (0x1 <<  2) // (MCI) Enable the Power-saving mode if PWSDIS is 0.
#define AT91C_MCI_PWSDIS      (0x1 <<  3) // (MCI) Power Save Mode Disable
#define 	AT91C_MCI_PWSDIS_0                    (0x0 <<  3) // (MCI) No effect
#define 	AT91C_MCI_PWSDIS_1                    (0x1 <<  3) // (MCI) Disable the Power-saving mode.
#define AT91C_MCI_SWRST       (0x1 <<  7) // (MCI) MCI Software reset
#define 	AT91C_MCI_SWRST_0                    (0x0 <<  7) // (MCI) No effect
#define 	AT91C_MCI_SWRST_1                    (0x1 <<  7) // (MCI) Resets the MCI
// -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- 
#define AT91C_MCI_CLKDIV      (0xFF <<  0) // (MCI) Clock Divider
#define AT91C_MCI_PWSDIV      (0x7 <<  8) // (MCI) Power Saving Divider
#define AT91C_MCI_RDPROOF     (0x1 << 11) // (MCI) Read Proof Enable
#define 	AT91C_MCI_RDPROOF_DISABLE              (0x0 << 11) // (MCI) Disables Read Proof
#define 	AT91C_MCI_RDPROOF_ENABLE               (0x1 << 11) // (MCI) Enables Read Proof
#define AT91C_MCI_WRPROOF     (0x1 << 12) // (MCI) Write Proof Enable
#define 	AT91C_MCI_WRPROOF_DISABLE              (0x0 << 12) // (MCI) Disables Write Proof
#define 	AT91C_MCI_WRPROOF_ENABLE               (0x1 << 12) // (MCI) Enables Write Proof
#define AT91C_MCI_PDCFBYTE    (0x1 << 13) // (MCI) PDC Force Byte Transfer
#define 	AT91C_MCI_PDCFBYTE_DISABLE              (0x0 << 13) // (MCI) Disables PDC Force Byte Transfer
#define 	AT91C_MCI_PDCFBYTE_ENABLE               (0x1 << 13) // (MCI) Enables PDC Force Byte Transfer
#define AT91C_MCI_PDCPADV     (0x1 << 14) // (MCI) PDC Padding Value
#define AT91C_MCI_PDCMODE     (0x1 << 15) // (MCI) PDC Oriented Mode
#define 	AT91C_MCI_PDCMODE_DISABLE              (0x0 << 15) // (MCI) Disables PDC Transfer
#define 	AT91C_MCI_PDCMODE_ENABLE               (0x1 << 15) // (MCI) Enables PDC Transfer
#define AT91C_MCI_BLKLEN      (0xFFFF << 16) // (MCI) Data Block Length
// -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- 
#define AT91C_MCI_DTOCYC      (0xF <<  0) // (MCI) Data Timeout Cycle Number
#define AT91C_MCI_DTOMUL      (0x7 <<  4) // (MCI) Data Timeout Multiplier
#define 	AT91C_MCI_DTOMUL_1                    (0x0 <<  4) // (MCI) DTOCYC x 1
#define 	AT91C_MCI_DTOMUL_16                   (0x1 <<  4) // (MCI) DTOCYC x 16
#define 	AT91C_MCI_DTOMUL_128                  (0x2 <<  4) // (MCI) DTOCYC x 128
#define 	AT91C_MCI_DTOMUL_256                  (0x3 <<  4) // (MCI) DTOCYC x 256
#define 	AT91C_MCI_DTOMUL_1024                 (0x4 <<  4) // (MCI) DTOCYC x 1024
#define 	AT91C_MCI_DTOMUL_4096                 (0x5 <<  4) // (MCI) DTOCYC x 4096
#define 	AT91C_MCI_DTOMUL_65536                (0x6 <<  4) // (MCI) DTOCYC x 65536
#define 	AT91C_MCI_DTOMUL_1048576              (0x7 <<  4) // (MCI) DTOCYC x 1048576
// -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- 
#define AT91C_MCI_SCDSEL      (0x3 <<  0) // (MCI) SD Card Selector
#define 	AT91C_MCI_SCDSEL_SLOTA                (0x0) // (MCI) Slot A selected
#define 	AT91C_MCI_SCDSEL_SLOTB                (0x1) // (MCI) Slot B selected
#define 	AT91C_MCI_SCDSEL_RESERVED1            (0x2) // (MCI) 
#define 	AT91C_MCI_SCDSEL_RESERVED2            (0x3) // (MCI) 
#define AT91C_MCI_SCDBUS      (0x1 <<  7) // (MCI) SDCard/SDIO Bus Width
#define 	AT91C_MCI_SCDBUS_1BIT                 (0x0 <<  7) // (MCI) 1-bit data bus
#define 	AT91C_MCI_SCDBUS_4BITS                (0x1 <<  7) // (MCI) 4-bits data bus
// -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- 
#define AT91C_MCI_CMDNB       (0x3F <<  0) // (MCI) Command Number
#define AT91C_MCI_RSPTYP      (0x3 <<  6) // (MCI) Response Type
#define 	AT91C_MCI_RSPTYP_NO                   (0x0 <<  6) // (MCI) No response
#define 	AT91C_MCI_RSPTYP_48                   (0x1 <<  6) // (MCI) 48-bit response
#define 	AT91C_MCI_RSPTYP_136                  (0x2 <<  6) // (MCI) 136-bit response
#define AT91C_MCI_SPCMD       (0x7 <<  8) // (MCI) Special CMD
#define 	AT91C_MCI_SPCMD_NONE                 (0x0 <<  8) // (MCI) Not a special CMD
#define 	AT91C_MCI_SPCMD_INIT                 (0x1 <<  8) // (MCI) Initialization CMD
#define 	AT91C_MCI_SPCMD_SYNC                 (0x2 <<  8) // (MCI) Synchronized CMD
#define 	AT91C_MCI_SPCMD_IT_CMD               (0x4 <<  8) // (MCI) Interrupt command
#define 	AT91C_MCI_SPCMD_IT_REP               (0x5 <<  8) // (MCI) Interrupt response
#define AT91C_MCI_OPDCMD      (0x1 << 11) // (MCI) Open Drain Command
#define 	AT91C_MCI_OPDCMD_PUSHPULL             (0x0 << 11) // (MCI) Push/pull command
#define 	AT91C_MCI_OPDCMD_OPENDRAIN            (0x1 << 11) // (MCI) Open drain command
#define AT91C_MCI_MAXLAT      (0x1 << 12) // (MCI) Maximum Latency for Command to respond
#define 	AT91C_MCI_MAXLAT_5                    (0x0 << 12) // (MCI) 5 cycles maximum latency
#define 	AT91C_MCI_MAXLAT_64                   (0x1 << 12) // (MCI) 64 cycles maximum latency
#define AT91C_MCI_TRCMD       (0x3 << 16) // (MCI) Transfer CMD
#define 	AT91C_MCI_TRCMD_NO                   (0x0 << 16) // (MCI) No transfer
#define 	AT91C_MCI_TRCMD_START                (0x1 << 16) // (MCI) Start transfer
#define 	AT91C_MCI_TRCMD_STOP                 (0x2 << 16) // (MCI) Stop transfer
#define AT91C_MCI_TRDIR       (0x1 << 18) // (MCI) Transfer Direction
#define 	AT91C_MCI_TRDIR_WRITE                (0x0 << 18) // (MCI) Write
#define 	AT91C_MCI_TRDIR_READ                 (0x1 << 18) // (MCI) Read
#define AT91C_MCI_TRTYP       (0x7 << 19) // (MCI) Transfer Type
#define 	AT91C_MCI_TRTYP_BLOCK                (0x0 << 19) // (MCI) MMC/SDCard Single Block Transfer type
#define 	AT91C_MCI_TRTYP_MULTIPLE             (0x1 << 19) // (MCI) MMC/SDCard Multiple Block transfer type
#define 	AT91C_MCI_TRTYP_STREAM               (0x2 << 19) // (MCI) MMC Stream transfer type
#define 	AT91C_MCI_TRTYP_SDIO_BYTE            (0x4 << 19) // (MCI) SDIO Byte transfer type
#define 	AT91C_MCI_TRTYP_SDIO_BLOCK           (0x5 << 19) // (MCI) SDIO Block transfer type
#define AT91C_MCI_IOSPCMD     (0x3 << 24) // (MCI) SDIO Special Command
#define 	AT91C_MCI_IOSPCMD_NONE                 (0x0 << 24) // (MCI) NOT a special command
#define 	AT91C_MCI_IOSPCMD_SUSPEND              (0x1 << 24) // (MCI) SDIO Suspend Command
#define 	AT91C_MCI_IOSPCMD_RESUME               (0x2 << 24) // (MCI) SDIO Resume Command
// -------- MCI_BLKR : (MCI Offset: 0x18) MCI Block Register -------- 
#define AT91C_MCI_BCNT        (0xFFFF <<  0) // (MCI) MMC/SDIO Block Count / SDIO Byte Count
// -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- 
#define AT91C_MCI_CMDRDY      (0x1 <<  0) // (MCI) Command Ready flag
#define AT91C_MCI_RXRDY       (0x1 <<  1) // (MCI) RX Ready flag
#define AT91C_MCI_TXRDY       (0x1 <<  2) // (MCI) TX Ready flag
#define AT91C_MCI_BLKE        (0x1 <<  3) // (MCI) Data Block Transfer Ended flag
#define AT91C_MCI_DTIP        (0x1 <<  4) // (MCI) Data Transfer in Progress flag
#define AT91C_MCI_NOTBUSY     (0x1 <<  5) // (MCI) Data Line Not Busy flag
#define AT91C_MCI_ENDRX       (0x1 <<  6) // (MCI) End of RX Buffer flag
#define AT91C_MCI_ENDTX       (0x1 <<  7) // (MCI) End of TX Buffer flag
#define AT91C_MCI_SDIOIRQA    (0x1 <<  8) // (MCI) SDIO Interrupt for Slot A
#define AT91C_MCI_SDIOIRQB    (0x1 <<  9) // (MCI) SDIO Interrupt for Slot B
#define AT91C_MCI_SDIOIRQC    (0x1 << 10) // (MCI) SDIO Interrupt for Slot C
#define AT91C_MCI_SDIOIRQD    (0x1 << 11) // (MCI) SDIO Interrupt for Slot D
#define AT91C_MCI_RXBUFF      (0x1 << 14) // (MCI) RX Buffer Full flag
#define AT91C_MCI_TXBUFE      (0x1 << 15) // (MCI) TX Buffer Empty flag
#define AT91C_MCI_RINDE       (0x1 << 16) // (MCI) Response Index Error flag
#define AT91C_MCI_RDIRE       (0x1 << 17) // (MCI) Response Direction Error flag
#define AT91C_MCI_RCRCE       (0x1 << 18) // (MCI) Response CRC Error flag
#define AT91C_MCI_RENDE       (0x1 << 19) // (MCI) Response End Bit Error flag
#define AT91C_MCI_RTOE        (0x1 << 20) // (MCI) Response Time-out Error flag
#define AT91C_MCI_DCRCE       (0x1 << 21) // (MCI) data CRC Error flag
#define AT91C_MCI_DTOE        (0x1 << 22) // (MCI) Data timeout Error flag
#define AT91C_MCI_OVRE        (0x1 << 30) // (MCI) Overrun flag
#define AT91C_MCI_UNRE        (0x1 << 31) // (MCI) Underrun flag
// -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- 
// -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- 
// -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Two-wire Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_TWI {
	AT91_REG	 TWI_CR; 	// Control Register
	AT91_REG	 TWI_MMR; 	// Master Mode Register
	AT91_REG	 TWI_SMR; 	// Slave Mode Register
	AT91_REG	 TWI_IADR; 	// Internal Address Register
	AT91_REG	 TWI_CWGR; 	// Clock Waveform Generator Register
	AT91_REG	 Reserved0[3]; 	// 
	AT91_REG	 TWI_SR; 	// Status Register
	AT91_REG	 TWI_IER; 	// Interrupt Enable Register
	AT91_REG	 TWI_IDR; 	// Interrupt Disable Register
	AT91_REG	 TWI_IMR; 	// Interrupt Mask Register
	AT91_REG	 TWI_RHR; 	// Receive Holding Register
	AT91_REG	 TWI_THR; 	// Transmit Holding Register
	AT91_REG	 Reserved1[45]; 	// 
	AT91_REG	 TWI_ADDRSIZE; 	// TWI ADDRSIZE REGISTER 
	AT91_REG	 TWI_IPNAME1; 	// TWI IPNAME1 REGISTER 
	AT91_REG	 TWI_IPNAME2; 	// TWI IPNAME2 REGISTER 
	AT91_REG	 TWI_FEATURES; 	// TWI FEATURES REGISTER 
	AT91_REG	 TWI_VER; 	// Version Register
	AT91_REG	 TWI_RPR; 	// Receive Pointer Register
	AT91_REG	 TWI_RCR; 	// Receive Counter Register
	AT91_REG	 TWI_TPR; 	// Transmit Pointer Register
	AT91_REG	 TWI_TCR; 	// Transmit Counter Register
	AT91_REG	 TWI_RNPR; 	// Receive Next Pointer Register
	AT91_REG	 TWI_RNCR; 	// Receive Next Counter Register
	AT91_REG	 TWI_TNPR; 	// Transmit Next Pointer Register
	AT91_REG	 TWI_TNCR; 	// Transmit Next Counter Register
	AT91_REG	 TWI_PTCR; 	// PDC Transfer Control Register
	AT91_REG	 TWI_PTSR; 	// PDC Transfer Status Register
} AT91S_TWI, *AT91PS_TWI;
#else
#define TWI_CR          (AT91_CAST(AT91_REG *) 	0x00000000) // (TWI_CR) Control Register
#define TWI_MMR         (AT91_CAST(AT91_REG *) 	0x00000004) // (TWI_MMR) Master Mode Register
#define TWI_SMR         (AT91_CAST(AT91_REG *) 	0x00000008) // (TWI_SMR) Slave Mode Register
#define TWI_IADR        (AT91_CAST(AT91_REG *) 	0x0000000C) // (TWI_IADR) Internal Address Register
#define TWI_CWGR        (AT91_CAST(AT91_REG *) 	0x00000010) // (TWI_CWGR) Clock Waveform Generator Register
#define TWI_SR          (AT91_CAST(AT91_REG *) 	0x00000020) // (TWI_SR) Status Register
#define TWI_IER         (AT91_CAST(AT91_REG *) 	0x00000024) // (TWI_IER) Interrupt Enable Register
#define TWI_IDR         (AT91_CAST(AT91_REG *) 	0x00000028) // (TWI_IDR) Interrupt Disable Register
#define TWI_IMR         (AT91_CAST(AT91_REG *) 	0x0000002C) // (TWI_IMR) Interrupt Mask Register
#define TWI_RHR         (AT91_CAST(AT91_REG *) 	0x00000030) // (TWI_RHR) Receive Holding Register
#define TWI_THR         (AT91_CAST(AT91_REG *) 	0x00000034) // (TWI_THR) Transmit Holding Register
#define TWI_ADDRSIZE    (AT91_CAST(AT91_REG *) 	0x000000EC) // (TWI_ADDRSIZE) TWI ADDRSIZE REGISTER 
#define TWI_IPNAME1     (AT91_CAST(AT91_REG *) 	0x000000F0) // (TWI_IPNAME1) TWI IPNAME1 REGISTER 
#define TWI_IPNAME2     (AT91_CAST(AT91_REG *) 	0x000000F4) // (TWI_IPNAME2) TWI IPNAME2 REGISTER 
#define TWI_FEATURES    (AT91_CAST(AT91_REG *) 	0x000000F8) // (TWI_FEATURES) TWI FEATURES REGISTER 
#define TWI_VER         (AT91_CAST(AT91_REG *) 	0x000000FC) // (TWI_VER) Version Register

#endif
// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- 
#define AT91C_TWI_START       (0x1 <<  0) // (TWI) Send a START Condition
#define AT91C_TWI_STOP        (0x1 <<  1) // (TWI) Send a STOP Condition
#define AT91C_TWI_MSEN        (0x1 <<  2) // (TWI) TWI Master Transfer Enabled
#define AT91C_TWI_MSDIS       (0x1 <<  3) // (TWI) TWI Master Transfer Disabled
#define AT91C_TWI_SVEN        (0x1 <<  4) // (TWI) TWI Slave mode Enabled
#define AT91C_TWI_SVDIS       (0x1 <<  5) // (TWI) TWI Slave mode Disabled
#define AT91C_TWI_SWRST       (0x1 <<  7) // (TWI) Software Reset
// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- 
#define AT91C_TWI_IADRSZ      (0x3 <<  8) // (TWI) Internal Device Address Size
#define 	AT91C_TWI_IADRSZ_NO                   (0x0 <<  8) // (TWI) No internal device address
#define 	AT91C_TWI_IADRSZ_1_BYTE               (0x1 <<  8) // (TWI) One-byte internal device address
#define 	AT91C_TWI_IADRSZ_2_BYTE               (0x2 <<  8) // (TWI) Two-byte internal device address
#define 	AT91C_TWI_IADRSZ_3_BYTE               (0x3 <<  8) // (TWI) Three-byte internal device address
#define AT91C_TWI_MREAD       (0x1 << 12) // (TWI) Master Read Direction
#define AT91C_TWI_DADR        (0x7F << 16) // (TWI) Device Address
// -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- 
#define AT91C_TWI_SADR        (0x7F << 16) // (TWI) Slave Address
// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- 
#define AT91C_TWI_CLDIV       (0xFF <<  0) // (TWI) Clock Low Divider
#define AT91C_TWI_CHDIV       (0xFF <<  8) // (TWI) Clock High Divider
#define AT91C_TWI_CKDIV       (0x7 << 16) // (TWI) Clock Divider
// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- 
#define AT91C_TWI_TXCOMP_SLAVE (0x1 <<  0) // (TWI) Transmission Completed
#define AT91C_TWI_TXCOMP_MASTER (0x1 <<  0) // (TWI) Transmission Completed
#define AT91C_TWI_RXRDY       (0x1 <<  1) // (TWI) Receive holding register ReaDY
#define AT91C_TWI_TXRDY_MASTER (0x1 <<  2) // (TWI) Transmit holding register ReaDY
#define AT91C_TWI_TXRDY_SLAVE (0x1 <<  2) // (TWI) Transmit holding register ReaDY
#define AT91C_TWI_SVREAD      (0x1 <<  3) // (TWI) Slave READ (used only in Slave mode)
#define AT91C_TWI_SVACC       (0x1 <<  4) // (TWI) Slave ACCess (used only in Slave mode)
#define AT91C_TWI_GACC        (0x1 <<  5) // (TWI) General Call ACcess (used only in Slave mode)
#define AT91C_TWI_OVRE        (0x1 <<  6) // (TWI) Overrun Error (used only in Master and Multi-master mode)
#define AT91C_TWI_NACK_SLAVE  (0x1 <<  8) // (TWI) Not Acknowledged
#define AT91C_TWI_NACK_MASTER (0x1 <<  8) // (TWI) Not Acknowledged
#define AT91C_TWI_ARBLST_MULTI_MASTER (0x1 <<  9) // (TWI) Arbitration Lost (used only in Multimaster mode)
#define AT91C_TWI_SCLWS       (0x1 << 10) // (TWI) Clock Wait State (used only in Slave mode)
#define AT91C_TWI_EOSACC      (0x1 << 11) // (TWI) End Of Slave ACCess (used only in Slave mode)
#define AT91C_TWI_ENDRX       (0x1 << 12) // (TWI) End of Receiver Transfer
#define AT91C_TWI_ENDTX       (0x1 << 13) // (TWI) End of Receiver Transfer
#define AT91C_TWI_RXBUFF      (0x1 << 14) // (TWI) RXBUFF Interrupt
#define AT91C_TWI_TXBUFE      (0x1 << 15) // (TWI) TXBUFE Interrupt
// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- 
// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- 
// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Usart
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_USART {
	AT91_REG	 US_CR; 	// Control Register
	AT91_REG	 US_MR; 	// Mode Register
	AT91_REG	 US_IER; 	// Interrupt Enable Register
	AT91_REG	 US_IDR; 	// Interrupt Disable Register
	AT91_REG	 US_IMR; 	// Interrupt Mask Register
	AT91_REG	 US_CSR; 	// Channel Status Register
	AT91_REG	 US_RHR; 	// Receiver Holding Register
	AT91_REG	 US_THR; 	// Transmitter Holding Register
	AT91_REG	 US_BRGR; 	// Baud Rate Generator Register
	AT91_REG	 US_RTOR; 	// Receiver Time-out Register
	AT91_REG	 US_TTGR; 	// Transmitter Time-guard Register
	AT91_REG	 Reserved0[5]; 	// 
	AT91_REG	 US_FIDI; 	// FI_DI_Ratio Register
	AT91_REG	 US_NER; 	// Nb Errors Register
	AT91_REG	 Reserved1[1]; 	// 
	AT91_REG	 US_IF; 	// IRDA_FILTER Register
	AT91_REG	 Reserved2[44]; 	// 
	AT91_REG	 US_RPR; 	// Receive Pointer Register
	AT91_REG	 US_RCR; 	// Receive Counter Register
	AT91_REG	 US_TPR; 	// Transmit Pointer Register
	AT91_REG	 US_TCR; 	// Transmit Counter Register
	AT91_REG	 US_RNPR; 	// Receive Next Pointer Register
	AT91_REG	 US_RNCR; 	// Receive Next Counter Register
	AT91_REG	 US_TNPR; 	// Transmit Next Pointer Register
	AT91_REG	 US_TNCR; 	// Transmit Next Counter Register
	AT91_REG	 US_PTCR; 	// PDC Transfer Control Register
	AT91_REG	 US_PTSR; 	// PDC Transfer Status Register
} AT91S_USART, *AT91PS_USART;
#else
#define US_CR           (AT91_CAST(AT91_REG *) 	0x00000000) // (US_CR) Control Register
#define US_MR           (AT91_CAST(AT91_REG *) 	0x00000004) // (US_MR) Mode Register
#define US_IER          (AT91_CAST(AT91_REG *) 	0x00000008) // (US_IER) Interrupt Enable Register
#define US_IDR          (AT91_CAST(AT91_REG *) 	0x0000000C) // (US_IDR) Interrupt Disable Register
#define US_IMR          (AT91_CAST(AT91_REG *) 	0x00000010) // (US_IMR) Interrupt Mask Register
#define US_CSR          (AT91_CAST(AT91_REG *) 	0x00000014) // (US_CSR) Channel Status Register
#define US_RHR          (AT91_CAST(AT91_REG *) 	0x00000018) // (US_RHR) Receiver Holding Register
#define US_THR          (AT91_CAST(AT91_REG *) 	0x0000001C) // (US_THR) Transmitter Holding Register
#define US_BRGR         (AT91_CAST(AT91_REG *) 	0x00000020) // (US_BRGR) Baud Rate Generator Register
#define US_RTOR         (AT91_CAST(AT91_REG *) 	0x00000024) // (US_RTOR) Receiver Time-out Register
#define US_TTGR         (AT91_CAST(AT91_REG *) 	0x00000028) // (US_TTGR) Transmitter Time-guard Register
#define US_FIDI         (AT91_CAST(AT91_REG *) 	0x00000040) // (US_FIDI) FI_DI_Ratio Register
#define US_NER          (AT91_CAST(AT91_REG *) 	0x00000044) // (US_NER) Nb Errors Register
#define US_IF           (AT91_CAST(AT91_REG *) 	0x0000004C) // (US_IF) IRDA_FILTER Register

#endif
// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- 
#define AT91C_US_STTBRK       (0x1 <<  9) // (USART) Start Break
#define AT91C_US_STPBRK       (0x1 << 10) // (USART) Stop Break
#define AT91C_US_STTTO        (0x1 << 11) // (USART) Start Time-out
#define AT91C_US_SENDA        (0x1 << 12) // (USART) Send Address
#define AT91C_US_RSTIT        (0x1 << 13) // (USART) Reset Iterations
#define AT91C_US_RSTNACK      (0x1 << 14) // (USART) Reset Non Acknowledge
#define AT91C_US_RETTO        (0x1 << 15) // (USART) Rearm Time-out
#define AT91C_US_DTREN        (0x1 << 16) // (USART) Data Terminal ready Enable
#define AT91C_US_DTRDIS       (0x1 << 17) // (USART) Data Terminal ready Disable
#define AT91C_US_RTSEN        (0x1 << 18) // (USART) Request to Send enable
#define AT91C_US_RTSDIS       (0x1 << 19) // (USART) Request to Send Disable
// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- 
#define AT91C_US_USMODE       (0xF <<  0) // (USART) Usart mode
#define 	AT91C_US_USMODE_NORMAL               (0x0) // (USART) Normal
#define 	AT91C_US_USMODE_RS485                (0x1) // (USART) RS485
#define 	AT91C_US_USMODE_HWHSH                (0x2) // (USART) Hardware Handshaking
#define 	AT91C_US_USMODE_MODEM                (0x3) // (USART) Modem
#define 	AT91C_US_USMODE_ISO7816_0            (0x4) // (USART) ISO7816 protocol: T = 0
#define 	AT91C_US_USMODE_ISO7816_1            (0x6) // (USART) ISO7816 protocol: T = 1
#define 	AT91C_US_USMODE_IRDA                 (0x8) // (USART) IrDA
#define 	AT91C_US_USMODE_SWHSH                (0xC) // (USART) Software Handshaking
#define AT91C_US_CLKS         (0x3 <<  4) // (USART) Clock Selection (Baud Rate generator Input Clock
#define 	AT91C_US_CLKS_CLOCK                (0x0 <<  4) // (USART) Clock
#define 	AT91C_US_CLKS_FDIV1                (0x1 <<  4) // (USART) fdiv1
#define 	AT91C_US_CLKS_SLOW                 (0x2 <<  4) // (USART) slow_clock (ARM)
#define 	AT91C_US_CLKS_EXT                  (0x3 <<  4) // (USART) External (SCK)
#define AT91C_US_CHRL         (0x3 <<  6) // (USART) Clock Selection (Baud Rate generator Input Clock
#define 	AT91C_US_CHRL_5_BITS               (0x0 <<  6) // (USART) Character Length: 5 bits
#define 	AT91C_US_CHRL_6_BITS               (0x1 <<  6) // (USART) Character Length: 6 bits
#define 	AT91C_US_CHRL_7_BITS               (0x2 <<  6) // (USART) Character Length: 7 bits
#define 	AT91C_US_CHRL_8_BITS               (0x3 <<  6) // (USART) Character Length: 8 bits
#define AT91C_US_SYNC         (0x1 <<  8) // (USART) Synchronous Mode Select
#define AT91C_US_NBSTOP       (0x3 << 12) // (USART) Number of Stop bits
#define 	AT91C_US_NBSTOP_1_BIT                (0x0 << 12) // (USART) 1 stop bit
#define 	AT91C_US_NBSTOP_15_BIT               (0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits
#define 	AT91C_US_NBSTOP_2_BIT                (0x2 << 12) // (USART) 2 stop bits
#define AT91C_US_MSBF         (0x1 << 16) // (USART) Bit Order
#define AT91C_US_MODE9        (0x1 << 17) // (USART) 9-bit Character length
#define AT91C_US_CKLO         (0x1 << 18) // (USART) Clock Output Select
#define AT91C_US_OVER         (0x1 << 19) // (USART) Over Sampling Mode
#define AT91C_US_INACK        (0x1 << 20) // (USART) Inhibit Non Acknowledge
#define AT91C_US_DSNACK       (0x1 << 21) // (USART) Disable Successive NACK
#define AT91C_US_MAX_ITER     (0x1 << 24) // (USART) Number of Repetitions
#define AT91C_US_FILTER       (0x1 << 28) // (USART) Receive Line Filter
// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
#define AT91C_US_RXBRK        (0x1 <<  2) // (USART) Break Received/End of Break
#define AT91C_US_TIMEOUT      (0x1 <<  8) // (USART) Receiver Time-out
#define AT91C_US_ITERATION    (0x1 << 10) // (USART) Max number of Repetitions Reached
#define AT91C_US_NACK         (0x1 << 13) // (USART) Non Acknowledge
#define AT91C_US_RIIC         (0x1 << 16) // (USART) Ring INdicator Input Change Flag
#define AT91C_US_DSRIC        (0x1 << 17) // (USART) Data Set Ready Input Change Flag
#define AT91C_US_DCDIC        (0x1 << 18) // (USART) Data Carrier Flag
#define AT91C_US_CTSIC        (0x1 << 19) // (USART) Clear To Send Input Change Flag
// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- 
#define AT91C_US_RI           (0x1 << 20) // (USART) Image of RI Input
#define AT91C_US_DSR          (0x1 << 21) // (USART) Image of DSR Input
#define AT91C_US_DCD          (0x1 << 22) // (USART) Image of DCD Input
#define AT91C_US_CTS          (0x1 << 23) // (USART) Image of CTS Input

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Synchronous Serial Controller Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_SSC {
	AT91_REG	 SSC_CR; 	// Control Register
	AT91_REG	 SSC_CMR; 	// Clock Mode Register
	AT91_REG	 Reserved0[2]; 	// 
	AT91_REG	 SSC_RCMR; 	// Receive Clock ModeRegister
	AT91_REG	 SSC_RFMR; 	// Receive Frame Mode Register
	AT91_REG	 SSC_TCMR; 	// Transmit Clock Mode Register
	AT91_REG	 SSC_TFMR; 	// Transmit Frame Mode Register
	AT91_REG	 SSC_RHR; 	// Receive Holding Register
	AT91_REG	 SSC_THR; 	// Transmit Holding Register
	AT91_REG	 Reserved1[2]; 	// 
	AT91_REG	 SSC_RSHR; 	// Receive Sync Holding Register
	AT91_REG	 SSC_TSHR; 	// Transmit Sync Holding Register
	AT91_REG	 Reserved2[2]; 	// 
	AT91_REG	 SSC_SR; 	// Status Register
	AT91_REG	 SSC_IER; 	// Interrupt Enable Register
	AT91_REG	 SSC_IDR; 	// Interrupt Disable Register
	AT91_REG	 SSC_IMR; 	// Interrupt Mask Register
	AT91_REG	 Reserved3[44]; 	// 
	AT91_REG	 SSC_RPR; 	// Receive Pointer Register
	AT91_REG	 SSC_RCR; 	// Receive Counter Register
	AT91_REG	 SSC_TPR; 	// Transmit Pointer Register
	AT91_REG	 SSC_TCR; 	// Transmit Counter Register
	AT91_REG	 SSC_RNPR; 	// Receive Next Pointer Register
	AT91_REG	 SSC_RNCR; 	// Receive Next Counter Register
	AT91_REG	 SSC_TNPR; 	// Transmit Next Pointer Register
	AT91_REG	 SSC_TNCR; 	// Transmit Next Counter Register
	AT91_REG	 SSC_PTCR; 	// PDC Transfer Control Register
	AT91_REG	 SSC_PTSR; 	// PDC Transfer Status Register
} AT91S_SSC, *AT91PS_SSC;
#else
#define SSC_CR          (AT91_CAST(AT91_REG *) 	0x00000000) // (SSC_CR) Control Register
#define SSC_CMR         (AT91_CAST(AT91_REG *) 	0x00000004) // (SSC_CMR) Clock Mode Register
#define SSC_RCMR        (AT91_CAST(AT91_REG *) 	0x00000010) // (SSC_RCMR) Receive Clock ModeRegister
#define SSC_RFMR        (AT91_CAST(AT91_REG *) 	0x00000014) // (SSC_RFMR) Receive Frame Mode Register
#define SSC_TCMR        (AT91_CAST(AT91_REG *) 	0x00000018) // (SSC_TCMR) Transmit Clock Mode Register
#define SSC_TFMR        (AT91_CAST(AT91_REG *) 	0x0000001C) // (SSC_TFMR) Transmit Frame Mode Register
#define SSC_RHR         (AT91_CAST(AT91_REG *) 	0x00000020) // (SSC_RHR) Receive Holding Register
#define SSC_THR         (AT91_CAST(AT91_REG *) 	0x00000024) // (SSC_THR) Transmit Holding Register
#define SSC_RSHR        (AT91_CAST(AT91_REG *) 	0x00000030) // (SSC_RSHR) Receive Sync Holding Register
#define SSC_TSHR        (AT91_CAST(AT91_REG *) 	0x00000034) // (SSC_TSHR) Transmit Sync Holding Register
#define SSC_SR          (AT91_CAST(AT91_REG *) 	0x00000040) // (SSC_SR) Status Register
#define SSC_IER         (AT91_CAST(AT91_REG *) 	0x00000044) // (SSC_IER) Interrupt Enable Register
#define SSC_IDR         (AT91_CAST(AT91_REG *) 	0x00000048) // (SSC_IDR) Interrupt Disable Register
#define SSC_IMR         (AT91_CAST(AT91_REG *) 	0x0000004C) // (SSC_IMR) Interrupt Mask Register

#endif
// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- 
#define AT91C_SSC_RXEN        (0x1 <<  0) // (SSC) Receive Enable
#define AT91C_SSC_RXDIS       (0x1 <<  1) // (SSC) Receive Disable
#define AT91C_SSC_TXEN        (0x1 <<  8) // (SSC) Transmit Enable
#define AT91C_SSC_TXDIS       (0x1 <<  9) // (SSC) Transmit Disable
#define AT91C_SSC_SWRST       (0x1 << 15) // (SSC) Software Reset
// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- 
#define AT91C_SSC_CKS         (0x3 <<  0) // (SSC) Receive/Transmit Clock Selection
#define 	AT91C_SSC_CKS_DIV                  (0x0) // (SSC) Divided Clock
#define 	AT91C_SSC_CKS_TK                   (0x1) // (SSC) TK Clock signal
#define 	AT91C_SSC_CKS_RK                   (0x2) // (SSC) RK pin
#define AT91C_SSC_CKO         (0x7 <<  2) // (SSC) Receive/Transmit Clock Output Mode Selection
#define 	AT91C_SSC_CKO_NONE                 (0x0 <<  2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only
#define 	AT91C_SSC_CKO_CONTINOUS            (0x1 <<  2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output
#define 	AT91C_SSC_CKO_DATA_TX              (0x2 <<  2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output
#define AT91C_SSC_CKI         (0x1 <<  5) // (SSC) Receive/Transmit Clock Inversion
#define AT91C_SSC_START       (0xF <<  8) // (SSC) Receive/Transmit Start Selection
#define 	AT91C_SSC_START_CONTINOUS            (0x0 <<  8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
#define 	AT91C_SSC_START_TX                   (0x1 <<  8) // (SSC) Transmit/Receive start
#define 	AT91C_SSC_START_LOW_RF               (0x2 <<  8) // (SSC) Detection of a low level on RF input
#define 	AT91C_SSC_START_HIGH_RF              (0x3 <<  8) // (SSC) Detection of a high level on RF input
#define 	AT91C_SSC_START_FALL_RF              (0x4 <<  8) // (SSC) Detection of a falling edge on RF input
#define 	AT91C_SSC_START_RISE_RF              (0x5 <<  8) // (SSC) Detection of a rising edge on RF input
#define 	AT91C_SSC_START_LEVEL_RF             (0x6 <<  8) // (SSC) Detection of any level change on RF input
#define 	AT91C_SSC_START_EDGE_RF              (0x7 <<  8) // (SSC) Detection of any edge on RF input
#define 	AT91C_SSC_START_0                    (0x8 <<  8) // (SSC) Compare 0
#define AT91C_SSC_STTDLY      (0xFF << 16) // (SSC) Receive/Transmit Start Delay
#define AT91C_SSC_PERIOD      (0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection
// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- 
#define AT91C_SSC_DATLEN      (0x1F <<  0) // (SSC) Data Length
#define AT91C_SSC_LOOP        (0x1 <<  5) // (SSC) Loop Mode
#define AT91C_SSC_MSBF        (0x1 <<  7) // (SSC) Most Significant Bit First
#define AT91C_SSC_DATNB       (0xF <<  8) // (SSC) Data Number per Frame
#define AT91C_SSC_FSLEN       (0xF << 16) // (SSC) Receive/Transmit Frame Sync length
#define AT91C_SSC_FSOS        (0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection
#define 	AT91C_SSC_FSOS_NONE                 (0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only
#define 	AT91C_SSC_FSOS_NEGATIVE             (0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse
#define 	AT91C_SSC_FSOS_POSITIVE             (0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse
#define 	AT91C_SSC_FSOS_LOW                  (0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer
#define 	AT91C_SSC_FSOS_HIGH                 (0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer
#define 	AT91C_SSC_FSOS_TOGGLE               (0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer
#define AT91C_SSC_FSEDGE      (0x1 << 24) // (SSC) Frame Sync Edge Detection
// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- 
// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- 
#define AT91C_SSC_DATDEF      (0x1 <<  5) // (SSC) Data Default Value
#define AT91C_SSC_FSDEN       (0x1 << 23) // (SSC) Frame Sync Data Enable
// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- 
#define AT91C_SSC_TXRDY       (0x1 <<  0) // (SSC) Transmit Ready
#define AT91C_SSC_TXEMPTY     (0x1 <<  1) // (SSC) Transmit Empty
#define AT91C_SSC_ENDTX       (0x1 <<  2) // (SSC) End Of Transmission
#define AT91C_SSC_TXBUFE      (0x1 <<  3) // (SSC) Transmit Buffer Empty
#define AT91C_SSC_RXRDY       (0x1 <<  4) // (SSC) Receive Ready
#define AT91C_SSC_OVRUN       (0x1 <<  5) // (SSC) Receive Overrun
#define AT91C_SSC_ENDRX       (0x1 <<  6) // (SSC) End of Reception
#define AT91C_SSC_RXBUFF      (0x1 <<  7) // (SSC) Receive Buffer Full
#define AT91C_SSC_TXSYN       (0x1 << 10) // (SSC) Transmit Sync
#define AT91C_SSC_RXSYN       (0x1 << 11) // (SSC) Receive Sync
#define AT91C_SSC_TXENA       (0x1 << 16) // (SSC) Transmit Enable
#define AT91C_SSC_RXENA       (0x1 << 17) // (SSC) Receive Enable
// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- 
// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- 
// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR AC97 Controller Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_AC97C {
	AT91_REG	 Reserved0[2]; 	// 
	AT91_REG	 AC97C_MR; 	// Mode Register
	AT91_REG	 Reserved1[1]; 	// 
	AT91_REG	 AC97C_ICA; 	// Input Channel AssignementRegister
	AT91_REG	 AC97C_OCA; 	// Output Channel Assignement Register
	AT91_REG	 Reserved2[2]; 	// 
	AT91_REG	 AC97C_CARHR; 	// Channel A Receive Holding Register
	AT91_REG	 AC97C_CATHR; 	// Channel A Transmit Holding Register
	AT91_REG	 AC97C_CASR; 	// Channel A Status Register
	AT91_REG	 AC97C_CAMR; 	// Channel A Mode Register
	AT91_REG	 AC97C_CBRHR; 	// Channel B Receive Holding Register (optional)
	AT91_REG	 AC97C_CBTHR; 	// Channel B Transmit Holding Register (optional)
	AT91_REG	 AC97C_CBSR; 	// Channel B Status Register
	AT91_REG	 AC97C_CBMR; 	// Channel B Mode Register
	AT91_REG	 AC97C_CORHR; 	// COdec Transmit Holding Register
	AT91_REG	 AC97C_COTHR; 	// COdec Transmit Holding Register
	AT91_REG	 AC97C_COSR; 	// CODEC Status Register
	AT91_REG	 AC97C_COMR; 	// CODEC Mask Status Register
	AT91_REG	 AC97C_SR; 	// Status Register
	AT91_REG	 AC97C_IER; 	// Interrupt Enable Register
	AT91_REG	 AC97C_IDR; 	// Interrupt Disable Register
	AT91_REG	 AC97C_IMR; 	// Interrupt Mask Register
	AT91_REG	 Reserved3[39]; 	// 
	AT91_REG	 AC97C_VERSION; 	// Version Register
	AT91_REG	 AC97C_RPR; 	// Receive Pointer Register
	AT91_REG	 AC97C_RCR; 	// Receive Counter Register
	AT91_REG	 AC97C_TPR; 	// Transmit Pointer Register
	AT91_REG	 AC97C_TCR; 	// Transmit Counter Register
	AT91_REG	 AC97C_RNPR; 	// Receive Next Pointer Register
	AT91_REG	 AC97C_RNCR; 	// Receive Next Counter Register
	AT91_REG	 AC97C_TNPR; 	// Transmit Next Pointer Register
	AT91_REG	 AC97C_TNCR; 	// Transmit Next Counter Register
	AT91_REG	 AC97C_PTCR; 	// PDC Transfer Control Register
	AT91_REG	 AC97C_PTSR; 	// PDC Transfer Status Register
} AT91S_AC97C, *AT91PS_AC97C;
#else
#define AC97C_MR        (AT91_CAST(AT91_REG *) 	0x00000008) // (AC97C_MR) Mode Register
#define AC97C_ICA       (AT91_CAST(AT91_REG *) 	0x00000010) // (AC97C_ICA) Input Channel AssignementRegister
#define AC97C_OCA       (AT91_CAST(AT91_REG *) 	0x00000014) // (AC97C_OCA) Output Channel Assignement Register
#define AC97C_CARHR     (AT91_CAST(AT91_REG *) 	0x00000020) // (AC97C_CARHR) Channel A Receive Holding Register
#define AC97C_CATHR     (AT91_CAST(AT91_REG *) 	0x00000024) // (AC97C_CATHR) Channel A Transmit Holding Register
#define AC97C_CASR      (AT91_CAST(AT91_REG *) 	0x00000028) // (AC97C_CASR) Channel A Status Register
#define AC97C_CAMR      (AT91_CAST(AT91_REG *) 	0x0000002C) // (AC97C_CAMR) Channel A Mode Register
#define AC97C_CBRHR     (AT91_CAST(AT91_REG *) 	0x00000030) // (AC97C_CBRHR) Channel B Receive Holding Register (optional)
#define AC97C_CBTHR     (AT91_CAST(AT91_REG *) 	0x00000034) // (AC97C_CBTHR) Channel B Transmit Holding Register (optional)
#define AC97C_CBSR      (AT91_CAST(AT91_REG *) 	0x00000038) // (AC97C_CBSR) Channel B Status Register
#define AC97C_CBMR      (AT91_CAST(AT91_REG *) 	0x0000003C) // (AC97C_CBMR) Channel B Mode Register
#define AC97C_CORHR     (AT91_CAST(AT91_REG *) 	0x00000040) // (AC97C_CORHR) COdec Transmit Holding Register
#define AC97C_COTHR     (AT91_CAST(AT91_REG *) 	0x00000044) // (AC97C_COTHR) COdec Transmit Holding Register
#define AC97C_COSR      (AT91_CAST(AT91_REG *) 	0x00000048) // (AC97C_COSR) CODEC Status Register
#define AC97C_COMR      (AT91_CAST(AT91_REG *) 	0x0000004C) // (AC97C_COMR) CODEC Mask Status Register
#define AC97C_SR        (AT91_CAST(AT91_REG *) 	0x00000050) // (AC97C_SR) Status Register
#define AC97C_IER       (AT91_CAST(AT91_REG *) 	0x00000054) // (AC97C_IER) Interrupt Enable Register
#define AC97C_IDR       (AT91_CAST(AT91_REG *) 	0x00000058) // (AC97C_IDR) Interrupt Disable Register
#define AC97C_IMR       (AT91_CAST(AT91_REG *) 	0x0000005C) // (AC97C_IMR) Interrupt Mask Register
#define AC97C_VERSION   (AT91_CAST(AT91_REG *) 	0x000000FC) // (AC97C_VERSION) Version Register

#endif
// -------- AC97C_MR : (AC97C Offset: 0x8) AC97C Mode Register -------- 
#define AT91C_AC97C_ENA       (0x1 <<  0) // (AC97C) AC97 Controller Global Enable
#define AT91C_AC97C_WRST      (0x1 <<  1) // (AC97C) Warm Reset
#define AT91C_AC97C_VRA       (0x1 <<  2) // (AC97C) Variable RAte (for Data Slots)
// -------- AC97C_ICA : (AC97C Offset: 0x10) AC97C Input Channel Assignement Register -------- 
#define AT91C_AC97C_CHID3     (0x7 <<  0) // (AC97C) Channel Id for the input slot 3
#define 	AT91C_AC97C_CHID3_NONE                 (0x0) // (AC97C) No data will be transmitted during this slot
#define 	AT91C_AC97C_CHID3_CA                   (0x1) // (AC97C) Channel A data will be transmitted during this slot
#define 	AT91C_AC97C_CHID3_CB                   (0x2) // (AC97C) Channel B data will be transmitted during this slot
#define 	AT91C_AC97C_CHID3_CC                   (0x3) // (AC97C) Channel C data will be transmitted during this slot
#define AT91C_AC97C_CHID4     (0x7 <<  3) // (AC97C) Channel Id for the input slot 4
#define 	AT91C_AC97C_CHID4_NONE                 (0x0 <<  3) // (AC97C) No data will be transmitted during this slot
#define 	AT91C_AC97C_CHID4_CA                   (0x1 <<  3) // (AC97C) Channel A data will be transmitted during this slot
#define 	AT91C_AC97C_CHID4_CB                   (0x2 <<  3) // (AC97C) Channel B data will be transmitted during this slot
#define 	AT91C_AC97C_CHID4_CC                   (0x3 <<  3) // (AC97C) Channel C data will be transmitted during this slot
#define AT91C_AC97C_CHID5     (0x7 <<  6) // (AC97C) Channel Id for the input slot 5
#define 	AT91C_AC97C_CHID5_NONE                 (0x0 <<  6) // (AC97C) No data will be transmitted during this slot
#define 	AT91C_AC97C_CHID5_CA                   (0x1 <<  6) // (AC97C) Channel A data will be transmitted during this slot
#define 	AT91C_AC97C_CHID5_CB                   (0x2 <<  6) // (AC97C) Channel B data will be transmitted during this slot
#define 	AT91C_AC97C_CHID5_CC                   (0x3 <<  6) // (AC97C) Channel C data will be transmitted during this slot
#define AT91C_AC97C_CHID6     (0x7 <<  9) // (AC97C) Channel Id for the input slot 6
#define 	AT91C_AC97C_CHID6_NONE                 (0x0 <<  9) // (AC97C) No data will be transmitted during this slot
#define 	AT91C_AC97C_CHID6_CA                   (0x1 <<  9) // (AC97C) Channel A data will be transmitted during this slot
#define 	AT91C_AC97C_CHID6_CB                   (0x2 <<  9) // (AC97C) Channel B data will be transmitted during this slot
#define 	AT91C_AC97C_CHID6_CC                   (0x3 <<  9) // (AC97C) Channel C data will be transmitted during this slot
#define AT91C_AC97C_CHID7     (0x7 << 12) // (AC97C) Channel Id for the input slot 7
#define 	AT91C_AC97C_CHID7_NONE                 (0x0 << 12) // (AC97C) No data will be transmitted during this slot
#define 	AT91C_AC97C_CHID7_CA                   (0x1 << 12) // (AC97C) Channel A data will be transmitted during this slot
#define 	AT91C_AC97C_CHID7_CB                   (0x2 << 12) // (AC97C) Channel B data will be transmitted during this slot
#define 	AT91C_AC97C_CHID7_CC                   (0x3 << 12) // (AC97C) Channel C data will be transmitted during this slot
#define AT91C_AC97C_CHID8     (0x7 << 15) // (AC97C) Channel Id for the input slot 8
#define 	AT91C_AC97C_CHID8_NONE                 (0x0 << 15) // (AC97C) No data will be transmitted during this slot
#define 	AT91C_AC97C_CHID8_CA                   (0x1 << 15) // (AC97C) Channel A data will be transmitted during this slot
#define 	AT91C_AC97C_CHID8_CB                   (0x2 << 15) // (AC97C) Channel B data will be transmitted during this slot
#define 	AT91C_AC97C_CHID8_CC                   (0x3 << 15) // (AC97C) Channel C data will be transmitted during this slot
#define AT91C_AC97C_CHID9     (0x7 << 18) // (AC97C) Channel Id for the input slot 9
#define 	AT91C_AC97C_CHID9_NONE                 (0x0 << 18) // (AC97C) No data will be transmitted during this slot
#define 	AT91C_AC97C_CHID9_CA                   (0x1 << 18) // (AC97C) Channel A data will be transmitted during this slot
#define 	AT91C_AC97C_CHID9_CB                   (0x2 << 18) // (AC97C) Channel B data will be transmitted during this slot
#define 	AT91C_AC97C_CHID9_CC                   (0x3 << 18) // (AC97C) Channel C data will be transmitted during this slot
#define AT91C_AC97C_CHID10    (0x7 << 21) // (AC97C) Channel Id for the input slot 10
#define 	AT91C_AC97C_CHID10_NONE                 (0x0 << 21) // (AC97C) No data will be transmitted during this slot
#define 	AT91C_AC97C_CHID10_CA                   (0x1 << 21) // (AC97C) Channel A data will be transmitted during this slot
#define 	AT91C_AC97C_CHID10_CB                   (0x2 << 21) // (AC97C) Channel B data will be transmitted during this slot
#define 	AT91C_AC97C_CHID10_CC                   (0x3 << 21) // (AC97C) Channel C data will be transmitted during this slot
#define AT91C_AC97C_CHID11    (0x7 << 24) // (AC97C) Channel Id for the input slot 11
#define 	AT91C_AC97C_CHID11_NONE                 (0x0 << 24) // (AC97C) No data will be transmitted during this slot
#define 	AT91C_AC97C_CHID11_CA                   (0x1 << 24) // (AC97C) Channel A data will be transmitted during this slot
#define 	AT91C_AC97C_CHID11_CB                   (0x2 << 24) // (AC97C) Channel B data will be transmitted during this slot
#define 	AT91C_AC97C_CHID11_CC                   (0x3 << 24) // (AC97C) Channel C data will be transmitted during this slot
#define AT91C_AC97C_CHID12    (0x7 << 27) // (AC97C) Channel Id for the input slot 12
#define 	AT91C_AC97C_CHID12_NONE                 (0x0 << 27) // (AC97C) No data will be transmitted during this slot
#define 	AT91C_AC97C_CHID12_CA                   (0x1 << 27) // (AC97C) Channel A data will be transmitted during this slot
#define 	AT91C_AC97C_CHID12_CB                   (0x2 << 27) // (AC97C) Channel B data will be transmitted during this slot
#define 	AT91C_AC97C_CHID12_CC                   (0x3 << 27) // (AC97C) Channel C data will be transmitted during this slot
// -------- AC97C_OCA : (AC97C Offset: 0x14) AC97C Output Channel Assignement Register -------- 
// -------- AC97C_CARHR : (AC97C Offset: 0x20) AC97C Channel A Receive Holding Register -------- 
#define AT91C_AC97C_RDATA     (0xFFFFF <<  0) // (AC97C) Receive data
// -------- AC97C_CATHR : (AC97C Offset: 0x24) AC97C Channel A Transmit Holding Register -------- 
#define AT91C_AC97C_TDATA     (0xFFFFF <<  0) // (AC97C) Transmit data
// -------- AC97C_CASR : (AC97C Offset: 0x28) AC97C Channel A Status Register -------- 
#define AT91C_AC97C_TXRDY     (0x1 <<  0) // (AC97C) 
#define AT91C_AC97C_TXEMPTY   (0x1 <<  1) // (AC97C) 
#define AT91C_AC97C_UNRUN     (0x1 <<  2) // (AC97C) 
#define AT91C_AC97C_RXRDY     (0x1 <<  4) // (AC97C) 
#define AT91C_AC97C_OVRUN     (0x1 <<  5) // (AC97C) 
#define AT91C_AC97C_ENDTX     (0x1 << 10) // (AC97C) 
#define AT91C_AC97C_TXBUFE    (0x1 << 11) // (AC97C) 
#define AT91C_AC97C_ENDRX     (0x1 << 14) // (AC97C) 
#define AT91C_AC97C_RXBUFF    (0x1 << 15) // (AC97C) 
// -------- AC97C_CAMR : (AC97C Offset: 0x2c) AC97C Channel A Mode Register -------- 
#define AT91C_AC97C_SIZE      (0x3 << 16) // (AC97C) 
#define 	AT91C_AC97C_SIZE_20_BITS              (0x0 << 16) // (AC97C) Data size is 20 bits
#define 	AT91C_AC97C_SIZE_18_BITS              (0x1 << 16) // (AC97C) Data size is 18 bits
#define 	AT91C_AC97C_SIZE_16_BITS              (0x2 << 16) // (AC97C) Data size is 16 bits
#define 	AT91C_AC97C_SIZE_10_BITS              (0x3 << 16) // (AC97C) Data size is 10 bits
#define AT91C_AC97C_CEM       (0x1 << 18) // (AC97C) 
#define AT91C_AC97C_CEN       (0x1 << 21) // (AC97C) 
#define AT91C_AC97C_PDCEN     (0x1 << 22) // (AC97C) 
// -------- AC97C_CBRHR : (AC97C Offset: 0x30) AC97C Channel B Receive Holding Register -------- 
// -------- AC97C_CBTHR : (AC97C Offset: 0x34) AC97C Channel B Transmit Holding Register -------- 
// -------- AC97C_CBSR : (AC97C Offset: 0x38) AC97C Channel B Status Register -------- 
// -------- AC97C_CBMR : (AC97C Offset: 0x3c) AC97C Channel B Mode Register -------- 
// -------- AC97C_CORHR : (AC97C Offset: 0x40) AC97C Codec Channel Receive Holding Register -------- 
#define AT91C_AC97C_SDATA     (0xFFFF <<  0) // (AC97C) Status Data
// -------- AC97C_COTHR : (AC97C Offset: 0x44) AC97C Codec Channel Transmit Holding Register -------- 
#define AT91C_AC97C_CDATA     (0xFFFF <<  0) // (AC97C) Command Data
#define AT91C_AC97C_CADDR     (0x7F << 16) // (AC97C) COdec control register index
#define AT91C_AC97C_READ      (0x1 << 23) // (AC97C) Read/Write command
// -------- AC97C_COSR : (AC97C Offset: 0x48) AC97C CODEC Status Register -------- 
// -------- AC97C_COMR : (AC97C Offset: 0x4c) AC97C CODEC Mode Register -------- 
// -------- AC97C_SR : (AC97C Offset: 0x50) AC97C Status Register -------- 
#define AT91C_AC97C_SOF       (0x1 <<  0) // (AC97C) 
#define AT91C_AC97C_WKUP      (0x1 <<  1) // (AC97C) 
#define AT91C_AC97C_COEVT     (0x1 <<  2) // (AC97C) 
#define AT91C_AC97C_CAEVT     (0x1 <<  3) // (AC97C) 
#define AT91C_AC97C_CBEVT     (0x1 <<  4) // (AC97C) 
// -------- AC97C_IER : (AC97C Offset: 0x54) AC97C Interrupt Enable Register -------- 
// -------- AC97C_IDR : (AC97C Offset: 0x58) AC97C Interrupt Disable Register -------- 
// -------- AC97C_IMR : (AC97C Offset: 0x5c) AC97C Interrupt Mask Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Serial Parallel Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_SPI {
	AT91_REG	 SPI_CR; 	// Control Register
	AT91_REG	 SPI_MR; 	// Mode Register
	AT91_REG	 SPI_RDR; 	// Receive Data Register
	AT91_REG	 SPI_TDR; 	// Transmit Data Register
	AT91_REG	 SPI_SR; 	// Status Register
	AT91_REG	 SPI_IER; 	// Interrupt Enable Register
	AT91_REG	 SPI_IDR; 	// Interrupt Disable Register
	AT91_REG	 SPI_IMR; 	// Interrupt Mask Register
	AT91_REG	 Reserved0[4]; 	// 
	AT91_REG	 SPI_CSR[4]; 	// Chip Select Register
	AT91_REG	 Reserved1[48]; 	// 
	AT91_REG	 SPI_RPR; 	// Receive Pointer Register
	AT91_REG	 SPI_RCR; 	// Receive Counter Register
	AT91_REG	 SPI_TPR; 	// Transmit Pointer Register
	AT91_REG	 SPI_TCR; 	// Transmit Counter Register
	AT91_REG	 SPI_RNPR; 	// Receive Next Pointer Register
	AT91_REG	 SPI_RNCR; 	// Receive Next Counter Register
	AT91_REG	 SPI_TNPR; 	// Transmit Next Pointer Register
	AT91_REG	 SPI_TNCR; 	// Transmit Next Counter Register
	AT91_REG	 SPI_PTCR; 	// PDC Transfer Control Register
	AT91_REG	 SPI_PTSR; 	// PDC Transfer Status Register
} AT91S_SPI, *AT91PS_SPI;
#else
#define SPI_CR          (AT91_CAST(AT91_REG *) 	0x00000000) // (SPI_CR) Control Register
#define SPI_MR          (AT91_CAST(AT91_REG *) 	0x00000004) // (SPI_MR) Mode Register
#define SPI_RDR         (AT91_CAST(AT91_REG *) 	0x00000008) // (SPI_RDR) Receive Data Register
#define SPI_TDR         (AT91_CAST(AT91_REG *) 	0x0000000C) // (SPI_TDR) Transmit Data Register
#define SPI_SR          (AT91_CAST(AT91_REG *) 	0x00000010) // (SPI_SR) Status Register
#define SPI_IER         (AT91_CAST(AT91_REG *) 	0x00000014) // (SPI_IER) Interrupt Enable Register
#define SPI_IDR         (AT91_CAST(AT91_REG *) 	0x00000018) // (SPI_IDR) Interrupt Disable Register
#define SPI_IMR         (AT91_CAST(AT91_REG *) 	0x0000001C) // (SPI_IMR) Interrupt Mask Register
#define SPI_CSR         (AT91_CAST(AT91_REG *) 	0x00000030) // (SPI_CSR) Chip Select Register

#endif
// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- 
#define AT91C_SPI_SPIEN       (0x1 <<  0) // (SPI) SPI Enable
#define AT91C_SPI_SPIDIS      (0x1 <<  1) // (SPI) SPI Disable
#define AT91C_SPI_SWRST       (0x1 <<  7) // (SPI) SPI Software reset
#define AT91C_SPI_LASTXFER    (0x1 << 24) // (SPI) SPI Last Transfer
// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- 
#define AT91C_SPI_MSTR        (0x1 <<  0) // (SPI) Master/Slave Mode
#define AT91C_SPI_PS          (0x1 <<  1) // (SPI) Peripheral Select
#define 	AT91C_SPI_PS_FIXED                (0x0 <<  1) // (SPI) Fixed Peripheral Select
#define 	AT91C_SPI_PS_VARIABLE             (0x1 <<  1) // (SPI) Variable Peripheral Select
#define AT91C_SPI_PCSDEC      (0x1 <<  2) // (SPI) Chip Select Decode
#define AT91C_SPI_FDIV        (0x1 <<  3) // (SPI) Clock Selection
#define AT91C_SPI_MODFDIS     (0x1 <<  4) // (SPI) Mode Fault Detection
#define AT91C_SPI_LLB         (0x1 <<  7) // (SPI) Clock Selection
#define AT91C_SPI_PCS         (0xF << 16) // (SPI) Peripheral Chip Select
#define AT91C_SPI_DLYBCS      (0xFF << 24) // (SPI) Delay Between Chip Selects
// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- 
#define AT91C_SPI_RD          (0xFFFF <<  0) // (SPI) Receive Data
#define AT91C_SPI_RPCS        (0xF << 16) // (SPI) Peripheral Chip Select Status
// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- 
#define AT91C_SPI_TD          (0xFFFF <<  0) // (SPI) Transmit Data
#define AT91C_SPI_TPCS        (0xF << 16) // (SPI) Peripheral Chip Select Status
// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- 
#define AT91C_SPI_RDRF        (0x1 <<  0) // (SPI) Receive Data Register Full
#define AT91C_SPI_TDRE        (0x1 <<  1) // (SPI) Transmit Data Register Empty
#define AT91C_SPI_MODF        (0x1 <<  2) // (SPI) Mode Fault Error
#define AT91C_SPI_OVRES       (0x1 <<  3) // (SPI) Overrun Error Status
#define AT91C_SPI_ENDRX       (0x1 <<  4) // (SPI) End of Receiver Transfer
#define AT91C_SPI_ENDTX       (0x1 <<  5) // (SPI) End of Receiver Transfer
#define AT91C_SPI_RXBUFF      (0x1 <<  6) // (SPI) RXBUFF Interrupt
#define AT91C_SPI_TXBUFE      (0x1 <<  7) // (SPI) TXBUFE Interrupt
#define AT91C_SPI_NSSR        (0x1 <<  8) // (SPI) NSSR Interrupt
#define AT91C_SPI_TXEMPTY     (0x1 <<  9) // (SPI) TXEMPTY Interrupt
#define AT91C_SPI_SPIENS      (0x1 << 16) // (SPI) Enable Status
// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- 
// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- 
// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- 
// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- 
#define AT91C_SPI_CPOL        (0x1 <<  0) // (SPI) Clock Polarity
#define AT91C_SPI_NCPHA       (0x1 <<  1) // (SPI) Clock Phase
#define AT91C_SPI_CSAAT       (0x1 <<  3) // (SPI) Chip Select Active After Transfer
#define AT91C_SPI_BITS        (0xF <<  4) // (SPI) Bits Per Transfer
#define 	AT91C_SPI_BITS_8                    (0x0 <<  4) // (SPI) 8 Bits Per transfer
#define 	AT91C_SPI_BITS_9                    (0x1 <<  4) // (SPI) 9 Bits Per transfer
#define 	AT91C_SPI_BITS_10                   (0x2 <<  4) // (SPI) 10 Bits Per transfer
#define 	AT91C_SPI_BITS_11                   (0x3 <<  4) // (SPI) 11 Bits Per transfer
#define 	AT91C_SPI_BITS_12                   (0x4 <<  4) // (SPI) 12 Bits Per transfer
#define 	AT91C_SPI_BITS_13                   (0x5 <<  4) // (SPI) 13 Bits Per transfer
#define 	AT91C_SPI_BITS_14                   (0x6 <<  4) // (SPI) 14 Bits Per transfer
#define 	AT91C_SPI_BITS_15                   (0x7 <<  4) // (SPI) 15 Bits Per transfer
#define 	AT91C_SPI_BITS_16                   (0x8 <<  4) // (SPI) 16 Bits Per transfer
#define AT91C_SPI_SCBR        (0xFF <<  8) // (SPI) Serial Clock Baud Rate
#define AT91C_SPI_DLYBS       (0xFF << 16) // (SPI) Delay Before SPCK
#define AT91C_SPI_DLYBCT      (0xFF << 24) // (SPI) Delay Between Consecutive Transfers

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Control Area Network MailBox Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_CAN_MB {
	AT91_REG	 CAN_MB_MMR; 	// MailBox Mode Register
	AT91_REG	 CAN_MB_MAM; 	// MailBox Acceptance Mask Register
	AT91_REG	 CAN_MB_MID; 	// MailBox ID Register
	AT91_REG	 CAN_MB_MFID; 	// MailBox Family ID Register
	AT91_REG	 CAN_MB_MSR; 	// MailBox Status Register
	AT91_REG	 CAN_MB_MDL; 	// MailBox Data Low Register
	AT91_REG	 CAN_MB_MDH; 	// MailBox Data High Register
	AT91_REG	 CAN_MB_MCR; 	// MailBox Control Register
} AT91S_CAN_MB, *AT91PS_CAN_MB;
#else
#define CAN_MMR         (AT91_CAST(AT91_REG *) 	0x00000000) // (CAN_MMR) MailBox Mode Register
#define CAN_MAM         (AT91_CAST(AT91_REG *) 	0x00000004) // (CAN_MAM) MailBox Acceptance Mask Register
#define CAN_MID         (AT91_CAST(AT91_REG *) 	0x00000008) // (CAN_MID) MailBox ID Register
#define CAN_MFID        (AT91_CAST(AT91_REG *) 	0x0000000C) // (CAN_MFID) MailBox Family ID Register
#define CAN_MSR         (AT91_CAST(AT91_REG *) 	0x00000010) // (CAN_MSR) MailBox Status Register
#define CAN_MDL         (AT91_CAST(AT91_REG *) 	0x00000014) // (CAN_MDL) MailBox Data Low Register
#define CAN_MDH         (AT91_CAST(AT91_REG *) 	0x00000018) // (CAN_MDH) MailBox Data High Register
#define CAN_MCR         (AT91_CAST(AT91_REG *) 	0x0000001C) // (CAN_MCR) MailBox Control Register

#endif
// -------- CAN_MMR : (CAN_MB Offset: 0x0) CAN Message Mode Register -------- 
#define AT91C_CAN_MTIMEMARK   (0xFFFF <<  0) // (CAN_MB) Mailbox Timemark
#define AT91C_CAN_PRIOR       (0xF << 16) // (CAN_MB) Mailbox Priority
#define AT91C_CAN_MOT         (0x7 << 24) // (CAN_MB) Mailbox Object Type
#define 	AT91C_CAN_MOT_DIS                  (0x0 << 24) // (CAN_MB) 
#define 	AT91C_CAN_MOT_RX                   (0x1 << 24) // (CAN_MB) 
#define 	AT91C_CAN_MOT_RXOVERWRITE          (0x2 << 24) // (CAN_MB) 
#define 	AT91C_CAN_MOT_TX                   (0x3 << 24) // (CAN_MB) 
#define 	AT91C_CAN_MOT_CONSUMER             (0x4 << 24) // (CAN_MB) 
#define 	AT91C_CAN_MOT_PRODUCER             (0x5 << 24) // (CAN_MB) 
// -------- CAN_MAM : (CAN_MB Offset: 0x4) CAN Message Acceptance Mask Register -------- 
#define AT91C_CAN_MIDvB       (0x3FFFF <<  0) // (CAN_MB) Complementary bits for identifier in extended mode
#define AT91C_CAN_MIDvA       (0x7FF << 18) // (CAN_MB) Identifier for standard frame mode
#define AT91C_CAN_MIDE        (0x1 << 29) // (CAN_MB) Identifier Version
// -------- CAN_MID : (CAN_MB Offset: 0x8) CAN Message ID Register -------- 
// -------- CAN_MFID : (CAN_MB Offset: 0xc) CAN Message Family ID Register -------- 
// -------- CAN_MSR : (CAN_MB Offset: 0x10) CAN Message Status Register -------- 
#define AT91C_CAN_MTIMESTAMP  (0xFFFF <<  0) // (CAN_MB) Timer Value
#define AT91C_CAN_MDLC        (0xF << 16) // (CAN_MB) Mailbox Data Length Code
#define AT91C_CAN_MRTR        (0x1 << 20) // (CAN_MB) Mailbox Remote Transmission Request
#define AT91C_CAN_MABT        (0x1 << 22) // (CAN_MB) Mailbox Message Abort
#define AT91C_CAN_MRDY        (0x1 << 23) // (CAN_MB) Mailbox Ready
#define AT91C_CAN_MMI         (0x1 << 24) // (CAN_MB) Mailbox Message Ignored
// -------- CAN_MDL : (CAN_MB Offset: 0x14) CAN Message Data Low Register -------- 
// -------- CAN_MDH : (CAN_MB Offset: 0x18) CAN Message Data High Register -------- 
// -------- CAN_MCR : (CAN_MB Offset: 0x1c) CAN Message Control Register -------- 
#define AT91C_CAN_MACR        (0x1 << 22) // (CAN_MB) Abort Request for Mailbox
#define AT91C_CAN_MTCR        (0x1 << 23) // (CAN_MB) Mailbox Transfer Command

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Control Area Network Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_CAN {
	AT91_REG	 CAN_MR; 	// Mode Register
	AT91_REG	 CAN_IER; 	// Interrupt Enable Register
	AT91_REG	 CAN_IDR; 	// Interrupt Disable Register
	AT91_REG	 CAN_IMR; 	// Interrupt Mask Register
	AT91_REG	 CAN_SR; 	// Status Register
	AT91_REG	 CAN_BR; 	// Baudrate Register
	AT91_REG	 CAN_TIM; 	// Timer Register
	AT91_REG	 CAN_TIMESTP; 	// Time Stamp Register
	AT91_REG	 CAN_ECR; 	// Error Counter Register
	AT91_REG	 CAN_TCR; 	// Transfer Command Register
	AT91_REG	 CAN_ACR; 	// Abort Command Register
	AT91_REG	 Reserved0[52]; 	// 
	AT91_REG	 CAN_VR; 	// Version Register
	AT91_REG	 Reserved1[64]; 	// 
	AT91S_CAN_MB	 CAN_MB0; 	// CAN Mailbox 0
	AT91S_CAN_MB	 CAN_MB1; 	// CAN Mailbox 1
	AT91S_CAN_MB	 CAN_MB2; 	// CAN Mailbox 2
	AT91S_CAN_MB	 CAN_MB3; 	// CAN Mailbox 3
	AT91S_CAN_MB	 CAN_MB4; 	// CAN Mailbox 4
	AT91S_CAN_MB	 CAN_MB5; 	// CAN Mailbox 5
	AT91S_CAN_MB	 CAN_MB6; 	// CAN Mailbox 6
	AT91S_CAN_MB	 CAN_MB7; 	// CAN Mailbox 7
	AT91S_CAN_MB	 CAN_MB8; 	// CAN Mailbox 8
	AT91S_CAN_MB	 CAN_MB9; 	// CAN Mailbox 9
	AT91S_CAN_MB	 CAN_MB10; 	// CAN Mailbox 10
	AT91S_CAN_MB	 CAN_MB11; 	// CAN Mailbox 11
	AT91S_CAN_MB	 CAN_MB12; 	// CAN Mailbox 12
	AT91S_CAN_MB	 CAN_MB13; 	// CAN Mailbox 13
	AT91S_CAN_MB	 CAN_MB14; 	// CAN Mailbox 14
	AT91S_CAN_MB	 CAN_MB15; 	// CAN Mailbox 15
} AT91S_CAN, *AT91PS_CAN;
#else
#define CAN_MR          (AT91_CAST(AT91_REG *) 	0x00000000) // (CAN_MR) Mode Register
#define CAN_IER         (AT91_CAST(AT91_REG *) 	0x00000004) // (CAN_IER) Interrupt Enable Register
#define CAN_IDR         (AT91_CAST(AT91_REG *) 	0x00000008) // (CAN_IDR) Interrupt Disable Register
#define CAN_IMR         (AT91_CAST(AT91_REG *) 	0x0000000C) // (CAN_IMR) Interrupt Mask Register
#define CAN_SR          (AT91_CAST(AT91_REG *) 	0x00000010) // (CAN_SR) Status Register
#define CAN_BR          (AT91_CAST(AT91_REG *) 	0x00000014) // (CAN_BR) Baudrate Register
#define CAN_TIM         (AT91_CAST(AT91_REG *) 	0x00000018) // (CAN_TIM) Timer Register
#define CAN_TIMESTP     (AT91_CAST(AT91_REG *) 	0x0000001C) // (CAN_TIMESTP) Time Stamp Register
#define CAN_ECR         (AT91_CAST(AT91_REG *) 	0x00000020) // (CAN_ECR) Error Counter Register
#define CAN_TCR         (AT91_CAST(AT91_REG *) 	0x00000024) // (CAN_TCR) Transfer Command Register
#define CAN_ACR         (AT91_CAST(AT91_REG *) 	0x00000028) // (CAN_ACR) Abort Command Register
#define CAN_VR          (AT91_CAST(AT91_REG *) 	0x000000FC) // (CAN_VR) Version Register

#endif
// -------- CAN_MR : (CAN Offset: 0x0) CAN Mode Register -------- 
#define AT91C_CAN_CANEN       (0x1 <<  0) // (CAN) CAN Controller Enable
#define AT91C_CAN_LPM         (0x1 <<  1) // (CAN) Disable/Enable Low Power Mode
#define AT91C_CAN_ABM         (0x1 <<  2) // (CAN) Disable/Enable Autobaud/Listen Mode
#define AT91C_CAN_OVL         (0x1 <<  3) // (CAN) Disable/Enable Overload Frame
#define AT91C_CAN_TEOF        (0x1 <<  4) // (CAN) Time Stamp messages at each end of Frame
#define AT91C_CAN_TTM         (0x1 <<  5) // (CAN) Disable/Enable Time Trigger Mode
#define AT91C_CAN_TIMFRZ      (0x1 <<  6) // (CAN) Enable Timer Freeze
#define AT91C_CAN_DRPT        (0x1 <<  7) // (CAN) Disable Repeat
// -------- CAN_IER : (CAN Offset: 0x4) CAN Interrupt Enable Register -------- 
#define AT91C_CAN_MB0         (0x1 <<  0) // (CAN) Mailbox 0 Flag
#define AT91C_CAN_MB1         (0x1 <<  1) // (CAN) Mailbox 1 Flag
#define AT91C_CAN_MB2         (0x1 <<  2) // (CAN) Mailbox 2 Flag
#define AT91C_CAN_MB3         (0x1 <<  3) // (CAN) Mailbox 3 Flag
#define AT91C_CAN_MB4         (0x1 <<  4) // (CAN) Mailbox 4 Flag
#define AT91C_CAN_MB5         (0x1 <<  5) // (CAN) Mailbox 5 Flag
#define AT91C_CAN_MB6         (0x1 <<  6) // (CAN) Mailbox 6 Flag
#define AT91C_CAN_MB7         (0x1 <<  7) // (CAN) Mailbox 7 Flag
#define AT91C_CAN_MB8         (0x1 <<  8) // (CAN) Mailbox 8 Flag
#define AT91C_CAN_MB9         (0x1 <<  9) // (CAN) Mailbox 9 Flag
#define AT91C_CAN_MB10        (0x1 << 10) // (CAN) Mailbox 10 Flag
#define AT91C_CAN_MB11        (0x1 << 11) // (CAN) Mailbox 11 Flag
#define AT91C_CAN_MB12        (0x1 << 12) // (CAN) Mailbox 12 Flag
#define AT91C_CAN_MB13        (0x1 << 13) // (CAN) Mailbox 13 Flag
#define AT91C_CAN_MB14        (0x1 << 14) // (CAN) Mailbox 14 Flag
#define AT91C_CAN_MB15        (0x1 << 15) // (CAN) Mailbox 15 Flag
#define AT91C_CAN_ERRA        (0x1 << 16) // (CAN) Error Active Mode Flag
#define AT91C_CAN_WARN        (0x1 << 17) // (CAN) Warning Limit Flag
#define AT91C_CAN_ERRP        (0x1 << 18) // (CAN) Error Passive Mode Flag
#define AT91C_CAN_BOFF        (0x1 << 19) // (CAN) Bus Off Mode Flag
#define AT91C_CAN_SLEEP       (0x1 << 20) // (CAN) Sleep Flag
#define AT91C_CAN_WAKEUP      (0x1 << 21) // (CAN) Wakeup Flag
#define AT91C_CAN_TOVF        (0x1 << 22) // (CAN) Timer Overflow Flag
#define AT91C_CAN_TSTP        (0x1 << 23) // (CAN) Timestamp Flag
#define AT91C_CAN_CERR        (0x1 << 24) // (CAN) CRC Error
#define AT91C_CAN_SERR        (0x1 << 25) // (CAN) Stuffing Error
#define AT91C_CAN_AERR        (0x1 << 26) // (CAN) Acknowledgment Error
#define AT91C_CAN_FERR        (0x1 << 27) // (CAN) Form Error
#define AT91C_CAN_BERR        (0x1 << 28) // (CAN) Bit Error
// -------- CAN_IDR : (CAN Offset: 0x8) CAN Interrupt Disable Register -------- 
// -------- CAN_IMR : (CAN Offset: 0xc) CAN Interrupt Mask Register -------- 
// -------- CAN_SR : (CAN Offset: 0x10) CAN Status Register -------- 
#define AT91C_CAN_RBSY        (0x1 << 29) // (CAN) Receiver Busy
#define AT91C_CAN_TBSY        (0x1 << 30) // (CAN) Transmitter Busy
#define AT91C_CAN_OVLY        (0x1 << 31) // (CAN) Overload Busy
// -------- CAN_BR : (CAN Offset: 0x14) CAN Baudrate Register -------- 
#define AT91C_CAN_PHASE2      (0x7 <<  0) // (CAN) Phase 2 segment
#define AT91C_CAN_PHASE1      (0x7 <<  4) // (CAN) Phase 1 segment
#define AT91C_CAN_PROPAG      (0x7 <<  8) // (CAN) Programmation time segment
#define AT91C_CAN_SYNC        (0x3 << 12) // (CAN) Re-synchronization jump width segment
#define AT91C_CAN_BRP         (0x7F << 16) // (CAN) Baudrate Prescaler
#define AT91C_CAN_SMP         (0x1 << 24) // (CAN) Sampling mode
// -------- CAN_TIM : (CAN Offset: 0x18) CAN Timer Register -------- 
#define AT91C_CAN_TIMER       (0xFFFF <<  0) // (CAN) Timer field
// -------- CAN_TIMESTP : (CAN Offset: 0x1c) CAN Timestamp Register -------- 
// -------- CAN_ECR : (CAN Offset: 0x20) CAN Error Counter Register -------- 
#define AT91C_CAN_REC         (0xFF <<  0) // (CAN) Receive Error Counter
#define AT91C_CAN_TEC         (0xFF << 16) // (CAN) Transmit Error Counter
// -------- CAN_TCR : (CAN Offset: 0x24) CAN Transfer Command Register -------- 
#define AT91C_CAN_TIMRST      (0x1 << 31) // (CAN) Timer Reset Field
// -------- CAN_ACR : (CAN Offset: 0x28) CAN Abort Command Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR PWMC Channel Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_PWMC_CH {
	AT91_REG	 PWMC_CMR; 	// Channel Mode Register
	AT91_REG	 PWMC_CDTYR; 	// Channel Duty Cycle Register
	AT91_REG	 PWMC_CPRDR; 	// Channel Period Register
	AT91_REG	 PWMC_CCNTR; 	// Channel Counter Register
	AT91_REG	 PWMC_CUPDR; 	// Channel Update Register
	AT91_REG	 PWMC_Reserved[3]; 	// Reserved
} AT91S_PWMC_CH, *AT91PS_PWMC_CH;
#else
#define PWMC_CMR        (AT91_CAST(AT91_REG *) 	0x00000000) // (PWMC_CMR) Channel Mode Register
#define PWMC_CDTYR      (AT91_CAST(AT91_REG *) 	0x00000004) // (PWMC_CDTYR) Channel Duty Cycle Register
#define PWMC_CPRDR      (AT91_CAST(AT91_REG *) 	0x00000008) // (PWMC_CPRDR) Channel Period Register
#define PWMC_CCNTR      (AT91_CAST(AT91_REG *) 	0x0000000C) // (PWMC_CCNTR) Channel Counter Register
#define PWMC_CUPDR      (AT91_CAST(AT91_REG *) 	0x00000010) // (PWMC_CUPDR) Channel Update Register
#define Reserved        (AT91_CAST(AT91_REG *) 	0x00000014) // (Reserved) Reserved

#endif
// -------- PWMC_CMR : (PWMC_CH Offset: 0x0) PWMC Channel Mode Register -------- 
#define AT91C_PWMC_CPRE       (0xF <<  0) // (PWMC_CH) Channel Pre-scaler : PWMC_CLKx
#define 	AT91C_PWMC_CPRE_MCK                  (0x0) // (PWMC_CH) 
#define 	AT91C_PWMC_CPRE_MCKA                 (0xB) // (PWMC_CH) 
#define 	AT91C_PWMC_CPRE_MCKB                 (0xC) // (PWMC_CH) 
#define AT91C_PWMC_CALG       (0x1 <<  8) // (PWMC_CH) Channel Alignment
#define AT91C_PWMC_CPOL       (0x1 <<  9) // (PWMC_CH) Channel Polarity
#define AT91C_PWMC_CPD        (0x1 << 10) // (PWMC_CH) Channel Update Period
// -------- PWMC_CDTYR : (PWMC_CH Offset: 0x4) PWMC Channel Duty Cycle Register -------- 
#define AT91C_PWMC_CDTY       (0x0 <<  0) // (PWMC_CH) Channel Duty Cycle
// -------- PWMC_CPRDR : (PWMC_CH Offset: 0x8) PWMC Channel Period Register -------- 
#define AT91C_PWMC_CPRD       (0x0 <<  0) // (PWMC_CH) Channel Period
// -------- PWMC_CCNTR : (PWMC_CH Offset: 0xc) PWMC Channel Counter Register -------- 
#define AT91C_PWMC_CCNT       (0x0 <<  0) // (PWMC_CH) Channel Counter
// -------- PWMC_CUPDR : (PWMC_CH Offset: 0x10) PWMC Channel Update Register -------- 
#define AT91C_PWMC_CUPD       (0x0 <<  0) // (PWMC_CH) Channel Update

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Pulse Width Modulation Controller Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_PWMC {
	AT91_REG	 PWMC_MR; 	// PWMC Mode Register
	AT91_REG	 PWMC_ENA; 	// PWMC Enable Register
	AT91_REG	 PWMC_DIS; 	// PWMC Disable Register
	AT91_REG	 PWMC_SR; 	// PWMC Status Register
	AT91_REG	 PWMC_IER; 	// PWMC Interrupt Enable Register
	AT91_REG	 PWMC_IDR; 	// PWMC Interrupt Disable Register
	AT91_REG	 PWMC_IMR; 	// PWMC Interrupt Mask Register
	AT91_REG	 PWMC_ISR; 	// PWMC Interrupt Status Register
	AT91_REG	 Reserved0[55]; 	// 
	AT91_REG	 PWMC_VR; 	// PWMC Version Register
	AT91_REG	 Reserved1[64]; 	// 
	AT91S_PWMC_CH	 PWMC_CH[32]; 	// PWMC Channel
} AT91S_PWMC, *AT91PS_PWMC;
#else
#define PWMC_MR         (AT91_CAST(AT91_REG *) 	0x00000000) // (PWMC_MR) PWMC Mode Register
#define PWMC_ENA        (AT91_CAST(AT91_REG *) 	0x00000004) // (PWMC_ENA) PWMC Enable Register
#define PWMC_DIS        (AT91_CAST(AT91_REG *) 	0x00000008) // (PWMC_DIS) PWMC Disable Register
#define PWMC_SR         (AT91_CAST(AT91_REG *) 	0x0000000C) // (PWMC_SR) PWMC Status Register
#define PWMC_IER        (AT91_CAST(AT91_REG *) 	0x00000010) // (PWMC_IER) PWMC Interrupt Enable Register
#define PWMC_IDR        (AT91_CAST(AT91_REG *) 	0x00000014) // (PWMC_IDR) PWMC Interrupt Disable Register
#define PWMC_IMR        (AT91_CAST(AT91_REG *) 	0x00000018) // (PWMC_IMR) PWMC Interrupt Mask Register
#define PWMC_ISR        (AT91_CAST(AT91_REG *) 	0x0000001C) // (PWMC_ISR) PWMC Interrupt Status Register
#define PWMC_VR         (AT91_CAST(AT91_REG *) 	0x000000FC) // (PWMC_VR) PWMC Version Register

#endif
// -------- PWMC_MR : (PWMC Offset: 0x0) PWMC Mode Register -------- 
#define AT91C_PWMC_DIVA       (0xFF <<  0) // (PWMC) CLKA divide factor.
#define AT91C_PWMC_PREA       (0xF <<  8) // (PWMC) Divider Input Clock Prescaler A
#define 	AT91C_PWMC_PREA_MCK                  (0x0 <<  8) // (PWMC) 
#define AT91C_PWMC_DIVB       (0xFF << 16) // (PWMC) CLKB divide factor.
#define AT91C_PWMC_PREB       (0xF << 24) // (PWMC) Divider Input Clock Prescaler B
#define 	AT91C_PWMC_PREB_MCK                  (0x0 << 24) // (PWMC) 
// -------- PWMC_ENA : (PWMC Offset: 0x4) PWMC Enable Register -------- 
#define AT91C_PWMC_CHID0      (0x1 <<  0) // (PWMC) Channel ID 0
#define AT91C_PWMC_CHID1      (0x1 <<  1) // (PWMC) Channel ID 1
#define AT91C_PWMC_CHID2      (0x1 <<  2) // (PWMC) Channel ID 2
#define AT91C_PWMC_CHID3      (0x1 <<  3) // (PWMC) Channel ID 3
#define AT91C_PWMC_CHID4      (0x1 <<  4) // (PWMC) Channel ID 4
#define AT91C_PWMC_CHID5      (0x1 <<  5) // (PWMC) Channel ID 5
#define AT91C_PWMC_CHID6      (0x1 <<  6) // (PWMC) Channel ID 6
#define AT91C_PWMC_CHID7      (0x1 <<  7) // (PWMC) Channel ID 7
// -------- PWMC_DIS : (PWMC Offset: 0x8) PWMC Disable Register -------- 
// -------- PWMC_SR : (PWMC Offset: 0xc) PWMC Status Register -------- 
// -------- PWMC_IER : (PWMC Offset: 0x10) PWMC Interrupt Enable Register -------- 
// -------- PWMC_IDR : (PWMC Offset: 0x14) PWMC Interrupt Disable Register -------- 
// -------- PWMC_IMR : (PWMC Offset: 0x18) PWMC Interrupt Mask Register -------- 
// -------- PWMC_ISR : (PWMC Offset: 0x1c) PWMC Interrupt Status Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Ethernet MAC 10/100
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_EMAC {
	AT91_REG	 EMAC_NCR; 	// Network Control Register
	AT91_REG	 EMAC_NCFGR; 	// Network Configuration Register
	AT91_REG	 EMAC_NSR; 	// Network Status Register
	AT91_REG	 Reserved0[2]; 	// 
	AT91_REG	 EMAC_TSR; 	// Transmit Status Register
	AT91_REG	 EMAC_RBQP; 	// Receive Buffer Queue Pointer
	AT91_REG	 EMAC_TBQP; 	// Transmit Buffer Queue Pointer
	AT91_REG	 EMAC_RSR; 	// Receive Status Register
	AT91_REG	 EMAC_ISR; 	// Interrupt Status Register
	AT91_REG	 EMAC_IER; 	// Interrupt Enable Register
	AT91_REG	 EMAC_IDR; 	// Interrupt Disable Register
	AT91_REG	 EMAC_IMR; 	// Interrupt Mask Register
	AT91_REG	 EMAC_MAN; 	// PHY Maintenance Register
	AT91_REG	 EMAC_PTR; 	// Pause Time Register
	AT91_REG	 EMAC_PFR; 	// Pause Frames received Register
	AT91_REG	 EMAC_FTO; 	// Frames Transmitted OK Register
	AT91_REG	 EMAC_SCF; 	// Single Collision Frame Register
	AT91_REG	 EMAC_MCF; 	// Multiple Collision Frame Register
	AT91_REG	 EMAC_FRO; 	// Frames Received OK Register
	AT91_REG	 EMAC_FCSE; 	// Frame Check Sequence Error Register
	AT91_REG	 EMAC_ALE; 	// Alignment Error Register
	AT91_REG	 EMAC_DTF; 	// Deferred Transmission Frame Register
	AT91_REG	 EMAC_LCOL; 	// Late Collision Register
	AT91_REG	 EMAC_ECOL; 	// Excessive Collision Register
	AT91_REG	 EMAC_TUND; 	// Transmit Underrun Error Register
	AT91_REG	 EMAC_CSE; 	// Carrier Sense Error Register
	AT91_REG	 EMAC_RRE; 	// Receive Ressource Error Register
	AT91_REG	 EMAC_ROV; 	// Receive Overrun Errors Register
	AT91_REG	 EMAC_RSE; 	// Receive Symbol Errors Register
	AT91_REG	 EMAC_ELE; 	// Excessive Length Errors Register
	AT91_REG	 EMAC_RJA; 	// Receive Jabbers Register
	AT91_REG	 EMAC_USF; 	// Undersize Frames Register
	AT91_REG	 EMAC_STE; 	// SQE Test Error Register
	AT91_REG	 EMAC_RLE; 	// Receive Length Field Mismatch Register
	AT91_REG	 EMAC_TPF; 	// Transmitted Pause Frames Register
	AT91_REG	 EMAC_HRB; 	// Hash Address Bottom[31:0]
	AT91_REG	 EMAC_HRT; 	// Hash Address Top[63:32]
	AT91_REG	 EMAC_SA1L; 	// Specific Address 1 Bottom, First 4 bytes
	AT91_REG	 EMAC_SA1H; 	// Specific Address 1 Top, Last 2 bytes
	AT91_REG	 EMAC_SA2L; 	// Specific Address 2 Bottom, First 4 bytes
	AT91_REG	 EMAC_SA2H; 	// Specific Address 2 Top, Last 2 bytes
	AT91_REG	 EMAC_SA3L; 	// Specific Address 3 Bottom, First 4 bytes
	AT91_REG	 EMAC_SA3H; 	// Specific Address 3 Top, Last 2 bytes
	AT91_REG	 EMAC_SA4L; 	// Specific Address 4 Bottom, First 4 bytes
	AT91_REG	 EMAC_SA4H; 	// Specific Address 4 Top, Last 2 bytes
	AT91_REG	 EMAC_TID; 	// Type ID Checking Register
	AT91_REG	 EMAC_TPQ; 	// Transmit Pause Quantum Register
	AT91_REG	 EMAC_USRIO; 	// USER Input/Output Register
	AT91_REG	 EMAC_WOL; 	// Wake On LAN Register
	AT91_REG	 Reserved1[13]; 	// 
	AT91_REG	 EMAC_REV; 	// Revision Register
} AT91S_EMAC, *AT91PS_EMAC;
#else
#define EMAC_NCR        (AT91_CAST(AT91_REG *) 	0x00000000) // (EMAC_NCR) Network Control Register
#define EMAC_NCFGR      (AT91_CAST(AT91_REG *) 	0x00000004) // (EMAC_NCFGR) Network Configuration Register
#define EMAC_NSR        (AT91_CAST(AT91_REG *) 	0x00000008) // (EMAC_NSR) Network Status Register
#define EMAC_TSR        (AT91_CAST(AT91_REG *) 	0x00000014) // (EMAC_TSR) Transmit Status Register
#define EMAC_RBQP       (AT91_CAST(AT91_REG *) 	0x00000018) // (EMAC_RBQP) Receive Buffer Queue Pointer
#define EMAC_TBQP       (AT91_CAST(AT91_REG *) 	0x0000001C) // (EMAC_TBQP) Transmit Buffer Queue Pointer
#define EMAC_RSR        (AT91_CAST(AT91_REG *) 	0x00000020) // (EMAC_RSR) Receive Status Register
#define EMAC_ISR        (AT91_CAST(AT91_REG *) 	0x00000024) // (EMAC_ISR) Interrupt Status Register
#define EMAC_IER        (AT91_CAST(AT91_REG *) 	0x00000028) // (EMAC_IER) Interrupt Enable Register
#define EMAC_IDR        (AT91_CAST(AT91_REG *) 	0x0000002C) // (EMAC_IDR) Interrupt Disable Register
#define EMAC_IMR        (AT91_CAST(AT91_REG *) 	0x00000030) // (EMAC_IMR) Interrupt Mask Register
#define EMAC_MAN        (AT91_CAST(AT91_REG *) 	0x00000034) // (EMAC_MAN) PHY Maintenance Register
#define EMAC_PTR        (AT91_CAST(AT91_REG *) 	0x00000038) // (EMAC_PTR) Pause Time Register
#define EMAC_PFR        (AT91_CAST(AT91_REG *) 	0x0000003C) // (EMAC_PFR) Pause Frames received Register
#define EMAC_FTO        (AT91_CAST(AT91_REG *) 	0x00000040) // (EMAC_FTO) Frames Transmitted OK Register
#define EMAC_SCF        (AT91_CAST(AT91_REG *) 	0x00000044) // (EMAC_SCF) Single Collision Frame Register
#define EMAC_MCF        (AT91_CAST(AT91_REG *) 	0x00000048) // (EMAC_MCF) Multiple Collision Frame Register
#define EMAC_FRO        (AT91_CAST(AT91_REG *) 	0x0000004C) // (EMAC_FRO) Frames Received OK Register
#define EMAC_FCSE       (AT91_CAST(AT91_REG *) 	0x00000050) // (EMAC_FCSE) Frame Check Sequence Error Register
#define EMAC_ALE        (AT91_CAST(AT91_REG *) 	0x00000054) // (EMAC_ALE) Alignment Error Register
#define EMAC_DTF        (AT91_CAST(AT91_REG *) 	0x00000058) // (EMAC_DTF) Deferred Transmission Frame Register
#define EMAC_LCOL       (AT91_CAST(AT91_REG *) 	0x0000005C) // (EMAC_LCOL) Late Collision Register
#define EMAC_ECOL       (AT91_CAST(AT91_REG *) 	0x00000060) // (EMAC_ECOL) Excessive Collision Register
#define EMAC_TUND       (AT91_CAST(AT91_REG *) 	0x00000064) // (EMAC_TUND) Transmit Underrun Error Register
#define EMAC_CSE        (AT91_CAST(AT91_REG *) 	0x00000068) // (EMAC_CSE) Carrier Sense Error Register
#define EMAC_RRE        (AT91_CAST(AT91_REG *) 	0x0000006C) // (EMAC_RRE) Receive Ressource Error Register
#define EMAC_ROV        (AT91_CAST(AT91_REG *) 	0x00000070) // (EMAC_ROV) Receive Overrun Errors Register
#define EMAC_RSE        (AT91_CAST(AT91_REG *) 	0x00000074) // (EMAC_RSE) Receive Symbol Errors Register
#define EMAC_ELE        (AT91_CAST(AT91_REG *) 	0x00000078) // (EMAC_ELE) Excessive Length Errors Register
#define EMAC_RJA        (AT91_CAST(AT91_REG *) 	0x0000007C) // (EMAC_RJA) Receive Jabbers Register
#define EMAC_USF        (AT91_CAST(AT91_REG *) 	0x00000080) // (EMAC_USF) Undersize Frames Register
#define EMAC_STE        (AT91_CAST(AT91_REG *) 	0x00000084) // (EMAC_STE) SQE Test Error Register
#define EMAC_RLE        (AT91_CAST(AT91_REG *) 	0x00000088) // (EMAC_RLE) Receive Length Field Mismatch Register
#define EMAC_TPF        (AT91_CAST(AT91_REG *) 	0x0000008C) // (EMAC_TPF) Transmitted Pause Frames Register
#define EMAC_HRB        (AT91_CAST(AT91_REG *) 	0x00000090) // (EMAC_HRB) Hash Address Bottom[31:0]
#define EMAC_HRT        (AT91_CAST(AT91_REG *) 	0x00000094) // (EMAC_HRT) Hash Address Top[63:32]
#define EMAC_SA1L       (AT91_CAST(AT91_REG *) 	0x00000098) // (EMAC_SA1L) Specific Address 1 Bottom, First 4 bytes
#define EMAC_SA1H       (AT91_CAST(AT91_REG *) 	0x0000009C) // (EMAC_SA1H) Specific Address 1 Top, Last 2 bytes
#define EMAC_SA2L       (AT91_CAST(AT91_REG *) 	0x000000A0) // (EMAC_SA2L) Specific Address 2 Bottom, First 4 bytes
#define EMAC_SA2H       (AT91_CAST(AT91_REG *) 	0x000000A4) // (EMAC_SA2H) Specific Address 2 Top, Last 2 bytes
#define EMAC_SA3L       (AT91_CAST(AT91_REG *) 	0x000000A8) // (EMAC_SA3L) Specific Address 3 Bottom, First 4 bytes
#define EMAC_SA3H       (AT91_CAST(AT91_REG *) 	0x000000AC) // (EMAC_SA3H) Specific Address 3 Top, Last 2 bytes
#define EMAC_SA4L       (AT91_CAST(AT91_REG *) 	0x000000B0) // (EMAC_SA4L) Specific Address 4 Bottom, First 4 bytes
#define EMAC_SA4H       (AT91_CAST(AT91_REG *) 	0x000000B4) // (EMAC_SA4H) Specific Address 4 Top, Last 2 bytes
#define EMAC_TID        (AT91_CAST(AT91_REG *) 	0x000000B8) // (EMAC_TID) Type ID Checking Register
#define EMAC_TPQ        (AT91_CAST(AT91_REG *) 	0x000000BC) // (EMAC_TPQ) Transmit Pause Quantum Register
#define EMAC_USRIO      (AT91_CAST(AT91_REG *) 	0x000000C0) // (EMAC_USRIO) USER Input/Output Register
#define EMAC_WOL        (AT91_CAST(AT91_REG *) 	0x000000C4) // (EMAC_WOL) Wake On LAN Register
#define EMAC_REV        (AT91_CAST(AT91_REG *) 	0x000000FC) // (EMAC_REV) Revision Register

#endif
// -------- EMAC_NCR : (EMAC Offset: 0x0)  -------- 
#define AT91C_EMAC_LB         (0x1 <<  0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level.
#define AT91C_EMAC_LLB        (0x1 <<  1) // (EMAC) Loopback local. 
#define AT91C_EMAC_RE         (0x1 <<  2) // (EMAC) Receive enable. 
#define AT91C_EMAC_TE         (0x1 <<  3) // (EMAC) Transmit enable. 
#define AT91C_EMAC_MPE        (0x1 <<  4) // (EMAC) Management port enable. 
#define AT91C_EMAC_CLRSTAT    (0x1 <<  5) // (EMAC) Clear statistics registers. 
#define AT91C_EMAC_INCSTAT    (0x1 <<  6) // (EMAC) Increment statistics registers. 
#define AT91C_EMAC_WESTAT     (0x1 <<  7) // (EMAC) Write enable for statistics registers. 
#define AT91C_EMAC_BP         (0x1 <<  8) // (EMAC) Back pressure. 
#define AT91C_EMAC_TSTART     (0x1 <<  9) // (EMAC) Start Transmission. 
#define AT91C_EMAC_THALT      (0x1 << 10) // (EMAC) Transmission Halt. 
#define AT91C_EMAC_TPFR       (0x1 << 11) // (EMAC) Transmit pause frame 
#define AT91C_EMAC_TZQ        (0x1 << 12) // (EMAC) Transmit zero quantum pause frame
// -------- EMAC_NCFGR : (EMAC Offset: 0x4) Network Configuration Register -------- 
#define AT91C_EMAC_SPD        (0x1 <<  0) // (EMAC) Speed. 
#define AT91C_EMAC_FD         (0x1 <<  1) // (EMAC) Full duplex. 
#define AT91C_EMAC_JFRAME     (0x1 <<  3) // (EMAC) Jumbo Frames. 
#define AT91C_EMAC_CAF        (0x1 <<  4) // (EMAC) Copy all frames. 
#define AT91C_EMAC_NBC        (0x1 <<  5) // (EMAC) No broadcast. 
#define AT91C_EMAC_MTI        (0x1 <<  6) // (EMAC) Multicast hash event enable
#define AT91C_EMAC_UNI        (0x1 <<  7) // (EMAC) Unicast hash enable. 
#define AT91C_EMAC_BIG        (0x1 <<  8) // (EMAC) Receive 1522 bytes. 
#define AT91C_EMAC_EAE        (0x1 <<  9) // (EMAC) External address match enable. 
#define AT91C_EMAC_CLK        (0x3 << 10) // (EMAC) 
#define 	AT91C_EMAC_CLK_HCLK_8               (0x0 << 10) // (EMAC) HCLK divided by 8
#define 	AT91C_EMAC_CLK_HCLK_16              (0x1 << 10) // (EMAC) HCLK divided by 16
#define 	AT91C_EMAC_CLK_HCLK_32              (0x2 << 10) // (EMAC) HCLK divided by 32
#define 	AT91C_EMAC_CLK_HCLK_64              (0x3 << 10) // (EMAC) HCLK divided by 64
#define AT91C_EMAC_RTY        (0x1 << 12) // (EMAC) 
#define AT91C_EMAC_PAE        (0x1 << 13) // (EMAC) 
#define AT91C_EMAC_RBOF       (0x3 << 14) // (EMAC) 
#define 	AT91C_EMAC_RBOF_OFFSET_0             (0x0 << 14) // (EMAC) no offset from start of receive buffer
#define 	AT91C_EMAC_RBOF_OFFSET_1             (0x1 << 14) // (EMAC) one byte offset from start of receive buffer
#define 	AT91C_EMAC_RBOF_OFFSET_2             (0x2 << 14) // (EMAC) two bytes offset from start of receive buffer
#define 	AT91C_EMAC_RBOF_OFFSET_3             (0x3 << 14) // (EMAC) three bytes offset from start of receive buffer
#define AT91C_EMAC_RLCE       (0x1 << 16) // (EMAC) Receive Length field Checking Enable
#define AT91C_EMAC_DRFCS      (0x1 << 17) // (EMAC) Discard Receive FCS
#define AT91C_EMAC_EFRHD      (0x1 << 18) // (EMAC) 
#define AT91C_EMAC_IRXFCS     (0x1 << 19) // (EMAC) Ignore RX FCS
// -------- EMAC_NSR : (EMAC Offset: 0x8) Network Status Register -------- 
#define AT91C_EMAC_LINKR      (0x1 <<  0) // (EMAC) 
#define AT91C_EMAC_MDIO       (0x1 <<  1) // (EMAC) 
#define AT91C_EMAC_IDLE       (0x1 <<  2) // (EMAC) 
// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Status Register -------- 
#define AT91C_EMAC_UBR        (0x1 <<  0) // (EMAC) 
#define AT91C_EMAC_COL        (0x1 <<  1) // (EMAC) 
#define AT91C_EMAC_RLES       (0x1 <<  2) // (EMAC) 
#define AT91C_EMAC_TGO        (0x1 <<  3) // (EMAC) Transmit Go
#define AT91C_EMAC_BEX        (0x1 <<  4) // (EMAC) Buffers exhausted mid frame
#define AT91C_EMAC_COMP       (0x1 <<  5) // (EMAC) 
#define AT91C_EMAC_UND        (0x1 <<  6) // (EMAC) 
// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- 
#define AT91C_EMAC_BNA        (0x1 <<  0) // (EMAC) 
#define AT91C_EMAC_REC        (0x1 <<  1) // (EMAC) 
#define AT91C_EMAC_OVR        (0x1 <<  2) // (EMAC) 
// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- 
#define AT91C_EMAC_MFD        (0x1 <<  0) // (EMAC) 
#define AT91C_EMAC_RCOMP      (0x1 <<  1) // (EMAC) 
#define AT91C_EMAC_RXUBR      (0x1 <<  2) // (EMAC) 
#define AT91C_EMAC_TXUBR      (0x1 <<  3) // (EMAC) 
#define AT91C_EMAC_TUNDR      (0x1 <<  4) // (EMAC) 
#define AT91C_EMAC_RLEX       (0x1 <<  5) // (EMAC) 
#define AT91C_EMAC_TXERR      (0x1 <<  6) // (EMAC) 
#define AT91C_EMAC_TCOMP      (0x1 <<  7) // (EMAC) 
#define AT91C_EMAC_LINK       (0x1 <<  9) // (EMAC) 
#define AT91C_EMAC_ROVR       (0x1 << 10) // (EMAC) 
#define AT91C_EMAC_HRESP      (0x1 << 11) // (EMAC) 
#define AT91C_EMAC_PFRE       (0x1 << 12) // (EMAC) 
#define AT91C_EMAC_PTZ        (0x1 << 13) // (EMAC) 
// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- 
// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- 
// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- 
// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- 
#define AT91C_EMAC_DATA       (0xFFFF <<  0) // (EMAC) 
#define AT91C_EMAC_CODE       (0x3 << 16) // (EMAC) 
#define AT91C_EMAC_REGA       (0x1F << 18) // (EMAC) 
#define AT91C_EMAC_PHYA       (0x1F << 23) // (EMAC) 
#define AT91C_EMAC_RW         (0x3 << 28) // (EMAC) 
#define AT91C_EMAC_SOF        (0x3 << 30) // (EMAC) 
// -------- EMAC_USRIO : (EMAC Offset: 0xc0) USER Input Output Register -------- 
#define AT91C_EMAC_RMII       (0x1 <<  0) // (EMAC) Reduce MII
#define AT91C_EMAC_CLKEN      (0x1 <<  1) // (EMAC) Clock Enable
// -------- EMAC_WOL : (EMAC Offset: 0xc4) Wake On LAN Register -------- 
#define AT91C_EMAC_IP         (0xFFFF <<  0) // (EMAC) ARP request IP address
#define AT91C_EMAC_MAG        (0x1 << 16) // (EMAC) Magic packet event enable
#define AT91C_EMAC_ARP        (0x1 << 17) // (EMAC) ARP request event enable
#define AT91C_EMAC_SA1        (0x1 << 18) // (EMAC) Specific address register 1 event enable
// -------- EMAC_REV : (EMAC Offset: 0xfc) Revision Register -------- 
#define AT91C_EMAC_REVREF     (0xFFFF <<  0) // (EMAC) 
#define AT91C_EMAC_PARTREF    (0xFFFF << 16) // (EMAC) 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR LCD Controller
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_LCDC {
	AT91_REG	 LCDC_BA1; 	// DMA Base Address Register 1
	AT91_REG	 LCDC_BA2; 	// DMA Base Address Register 2
	AT91_REG	 LCDC_FRMP1; 	// DMA Frame Pointer Register 1
	AT91_REG	 LCDC_FRMP2; 	// DMA Frame Pointer Register 2
	AT91_REG	 LCDC_FRMA1; 	// DMA Frame Address Register 1
	AT91_REG	 LCDC_FRMA2; 	// DMA Frame Address Register 2
	AT91_REG	 LCDC_FRMCFG; 	// DMA Frame Configuration Register
	AT91_REG	 LCDC_DMACON; 	// DMA Control Register
	AT91_REG	 LCDC_DMA2DCFG; 	// DMA 2D addressing configuration
	AT91_REG	 Reserved0[503]; 	// 
	AT91_REG	 LCDC_LCDCON1; 	// LCD Control 1 Register
	AT91_REG	 LCDC_LCDCON2; 	// LCD Control 2 Register
	AT91_REG	 LCDC_TIM1; 	// LCD Timing Config 1 Register
	AT91_REG	 LCDC_TIM2; 	// LCD Timing Config 2 Register
	AT91_REG	 LCDC_LCDFRCFG; 	// LCD Frame Config Register
	AT91_REG	 LCDC_FIFO; 	// LCD FIFO Register
	AT91_REG	 LCDC_MVAL; 	// LCD Mode Toggle Rate Value Register
	AT91_REG	 LCDC_DP1_2; 	// Dithering Pattern DP1_2 Register
	AT91_REG	 LCDC_DP4_7; 	// Dithering Pattern DP4_7 Register
	AT91_REG	 LCDC_DP3_5; 	// Dithering Pattern DP3_5 Register
	AT91_REG	 LCDC_DP2_3; 	// Dithering Pattern DP2_3 Register
	AT91_REG	 LCDC_DP5_7; 	// Dithering Pattern DP5_7 Register
	AT91_REG	 LCDC_DP3_4; 	// Dithering Pattern DP3_4 Register
	AT91_REG	 LCDC_DP4_5; 	// Dithering Pattern DP4_5 Register
	AT91_REG	 LCDC_DP6_7; 	// Dithering Pattern DP6_7 Register
	AT91_REG	 LCDC_PWRCON; 	// Power Control Register
	AT91_REG	 LCDC_CTRSTCON; 	// Contrast Control Register
	AT91_REG	 LCDC_CTRSTVAL; 	// Contrast Value Register
	AT91_REG	 LCDC_IER; 	// Interrupt Enable Register
	AT91_REG	 LCDC_IDR; 	// Interrupt Disable Register
	AT91_REG	 LCDC_IMR; 	// Interrupt Mask Register
	AT91_REG	 LCDC_ISR; 	// Interrupt Enable Register
	AT91_REG	 LCDC_ICR; 	// Interrupt Clear Register
	AT91_REG	 LCDC_GPR; 	// General Purpose Register
	AT91_REG	 LCDC_ITR; 	// Interrupts Test Register
	AT91_REG	 LCDC_IRR; 	// Interrupts Raw Status Register
	AT91_REG	 Reserved1[230]; 	// 
	AT91_REG	 LCDC_LUT_ENTRY[256]; 	// LUT Entries Register
} AT91S_LCDC, *AT91PS_LCDC;
#else
#define LCDC_BA1        (AT91_CAST(AT91_REG *) 	0x00000000) // (LCDC_BA1) DMA Base Address Register 1
#define LCDC_BA2        (AT91_CAST(AT91_REG *) 	0x00000004) // (LCDC_BA2) DMA Base Address Register 2
#define LCDC_FRMP1      (AT91_CAST(AT91_REG *) 	0x00000008) // (LCDC_FRMP1) DMA Frame Pointer Register 1
#define LCDC_FRMP2      (AT91_CAST(AT91_REG *) 	0x0000000C) // (LCDC_FRMP2) DMA Frame Pointer Register 2
#define LCDC_FRMA1      (AT91_CAST(AT91_REG *) 	0x00000010) // (LCDC_FRMA1) DMA Frame Address Register 1
#define LCDC_FRMA2      (AT91_CAST(AT91_REG *) 	0x00000014) // (LCDC_FRMA2) DMA Frame Address Register 2
#define LCDC_FRMCFG     (AT91_CAST(AT91_REG *) 	0x00000018) // (LCDC_FRMCFG) DMA Frame Configuration Register
#define LCDC_DMACON     (AT91_CAST(AT91_REG *) 	0x0000001C) // (LCDC_DMACON) DMA Control Register
#define LCDC_DMA2DCFG   (AT91_CAST(AT91_REG *) 	0x00000020) // (LCDC_DMA2DCFG) DMA 2D addressing configuration
#define LCDC_LCDCON1    (AT91_CAST(AT91_REG *) 	0x00000800) // (LCDC_LCDCON1) LCD Control 1 Register
#define LCDC_LCDCON2    (AT91_CAST(AT91_REG *) 	0x00000804) // (LCDC_LCDCON2) LCD Control 2 Register
#define LCDC_TIM1       (AT91_CAST(AT91_REG *) 	0x00000808) // (LCDC_TIM1) LCD Timing Config 1 Register
#define LCDC_TIM2       (AT91_CAST(AT91_REG *) 	0x0000080C) // (LCDC_TIM2) LCD Timing Config 2 Register
#define LCDC_LCDFRCFG   (AT91_CAST(AT91_REG *) 	0x00000810) // (LCDC_LCDFRCFG) LCD Frame Config Register
#define LCDC_FIFO       (AT91_CAST(AT91_REG *) 	0x00000814) // (LCDC_FIFO) LCD FIFO Register
#define LCDC_MVAL       (AT91_CAST(AT91_REG *) 	0x00000818) // (LCDC_MVAL) LCD Mode Toggle Rate Value Register
#define LCDC_DP1_2      (AT91_CAST(AT91_REG *) 	0x0000081C) // (LCDC_DP1_2) Dithering Pattern DP1_2 Register
#define LCDC_DP4_7      (AT91_CAST(AT91_REG *) 	0x00000820) // (LCDC_DP4_7) Dithering Pattern DP4_7 Register
#define LCDC_DP3_5      (AT91_CAST(AT91_REG *) 	0x00000824) // (LCDC_DP3_5) Dithering Pattern DP3_5 Register
#define LCDC_DP2_3      (AT91_CAST(AT91_REG *) 	0x00000828) // (LCDC_DP2_3) Dithering Pattern DP2_3 Register
#define LCDC_DP5_7      (AT91_CAST(AT91_REG *) 	0x0000082C) // (LCDC_DP5_7) Dithering Pattern DP5_7 Register
#define LCDC_DP3_4      (AT91_CAST(AT91_REG *) 	0x00000830) // (LCDC_DP3_4) Dithering Pattern DP3_4 Register
#define LCDC_DP4_5      (AT91_CAST(AT91_REG *) 	0x00000834) // (LCDC_DP4_5) Dithering Pattern DP4_5 Register
#define LCDC_DP6_7      (AT91_CAST(AT91_REG *) 	0x00000838) // (LCDC_DP6_7) Dithering Pattern DP6_7 Register
#define LCDC_PWRCON     (AT91_CAST(AT91_REG *) 	0x0000083C) // (LCDC_PWRCON) Power Control Register
#define LCDC_CTRSTCON   (AT91_CAST(AT91_REG *) 	0x00000840) // (LCDC_CTRSTCON) Contrast Control Register
#define LCDC_CTRSTVAL   (AT91_CAST(AT91_REG *) 	0x00000844) // (LCDC_CTRSTVAL) Contrast Value Register
#define LCDC_IER        (AT91_CAST(AT91_REG *) 	0x00000848) // (LCDC_IER) Interrupt Enable Register
#define LCDC_IDR        (AT91_CAST(AT91_REG *) 	0x0000084C) // (LCDC_IDR) Interrupt Disable Register
#define LCDC_IMR        (AT91_CAST(AT91_REG *) 	0x00000850) // (LCDC_IMR) Interrupt Mask Register
#define LCDC_ISR        (AT91_CAST(AT91_REG *) 	0x00000854) // (LCDC_ISR) Interrupt Enable Register
#define LCDC_ICR        (AT91_CAST(AT91_REG *) 	0x00000858) // (LCDC_ICR) Interrupt Clear Register
#define LCDC_GPR        (AT91_CAST(AT91_REG *) 	0x0000085C) // (LCDC_GPR) General Purpose Register
#define LCDC_ITR        (AT91_CAST(AT91_REG *) 	0x00000860) // (LCDC_ITR) Interrupts Test Register
#define LCDC_IRR        (AT91_CAST(AT91_REG *) 	0x00000864) // (LCDC_IRR) Interrupts Raw Status Register
#define LCDC_LUT_ENTRY  (AT91_CAST(AT91_REG *) 	0x00000C00) // (LCDC_LUT_ENTRY) LUT Entries Register

#endif
// -------- LCDC_FRMP1 : (LCDC Offset: 0x8) DMA Frame Pointer 1 Register -------- 
#define AT91C_LCDC_FRMPT1     (0x3FFFFF <<  0) // (LCDC) Frame Pointer Address 1
// -------- LCDC_FRMP2 : (LCDC Offset: 0xc) DMA Frame Pointer 2 Register -------- 
#define AT91C_LCDC_FRMPT2     (0x1FFFFF <<  0) // (LCDC) Frame Pointer Address 2
// -------- LCDC_FRMCFG : (LCDC Offset: 0x18) DMA Frame Config Register -------- 
#define AT91C_LCDC_FRSIZE     (0x7FFFFF <<  0) // (LCDC) FRAME SIZE
#define AT91C_LCDC_BLENGTH    (0x7F << 24) // (LCDC) BURST LENGTH
// -------- LCDC_DMACON : (LCDC Offset: 0x1c) DMA Control Register -------- 
#define AT91C_LCDC_DMAEN      (0x1 <<  0) // (LCDC) DAM Enable
#define AT91C_LCDC_DMARST     (0x1 <<  1) // (LCDC) DMA Reset (WO)
#define AT91C_LCDC_DMABUSY    (0x1 <<  2) // (LCDC) DMA Reset (WO)
#define AT91C_LCDC_DMAUPDT    (0x1 <<  3) // (LCDC) DMA Configuration Update
#define AT91C_LCDC_DMA2DEN    (0x1 <<  4) // (LCDC) 2D Addressing Enable
// -------- LCDC_DMA2DCFG : (LCDC Offset: 0x20) DMA 2D addressing configuration Register -------- 
#define AT91C_LCDC_ADDRINC    (0xFFFF <<  0) // (LCDC) Number of 32b words that the DMA must jump when going to the next line
#define AT91C_LCDC_PIXELOFF   (0x1F << 24) // (LCDC) Offset (in bits) of the first pixel of the screen in the memory word which contain it
// -------- LCDC_LCDCON1 : (LCDC Offset: 0x800) LCD Control 1 Register -------- 
#define AT91C_LCDC_BYPASS     (0x1 <<  0) // (LCDC) Bypass lcd_pccklk divider
#define AT91C_LCDC_CLKVAL     (0x1FF << 12) // (LCDC) 9-bit Divider for pixel clock frequency
#define AT91C_LCDC_LINCNT     (0x7FF << 21) // (LCDC) Line Counter (RO)
// -------- LCDC_LCDCON2 : (LCDC Offset: 0x804) LCD Control 2 Register -------- 
#define AT91C_LCDC_DISTYPE    (0x3 <<  0) // (LCDC) Display Type
#define 	AT91C_LCDC_DISTYPE_STNMONO              (0x0) // (LCDC) STN Mono
#define 	AT91C_LCDC_DISTYPE_STNCOLOR             (0x1) // (LCDC) STN Color
#define 	AT91C_LCDC_DISTYPE_TFT                  (0x2) // (LCDC) TFT
#define AT91C_LCDC_SCANMOD    (0x1 <<  2) // (LCDC) Scan Mode
#define 	AT91C_LCDC_SCANMOD_SINGLESCAN           (0x0 <<  2) // (LCDC) Single Scan
#define 	AT91C_LCDC_SCANMOD_DUALSCAN             (0x1 <<  2) // (LCDC) Dual Scan
#define AT91C_LCDC_IFWIDTH    (0x3 <<  3) // (LCDC) Interface Width
#define 	AT91C_LCDC_IFWIDTH_FOURBITSWIDTH        (0x0 <<  3) // (LCDC) 4 Bits
#define 	AT91C_LCDC_IFWIDTH_EIGTHBITSWIDTH       (0x1 <<  3) // (LCDC) 8 Bits
#define 	AT91C_LCDC_IFWIDTH_SIXTEENBITSWIDTH     (0x2 <<  3) // (LCDC) 16 Bits
#define AT91C_LCDC_PIXELSIZE  (0x7 <<  5) // (LCDC) Bits per pixel
#define 	AT91C_LCDC_PIXELSIZE_ONEBITSPERPIXEL      (0x0 <<  5) // (LCDC) 1 Bits
#define 	AT91C_LCDC_PIXELSIZE_TWOBITSPERPIXEL      (0x1 <<  5) // (LCDC) 2 Bits
#define 	AT91C_LCDC_PIXELSIZE_FOURBITSPERPIXEL     (0x2 <<  5) // (LCDC) 4 Bits
#define 	AT91C_LCDC_PIXELSIZE_EIGTHBITSPERPIXEL    (0x3 <<  5) // (LCDC) 8 Bits
#define 	AT91C_LCDC_PIXELSIZE_SIXTEENBITSPERPIXEL  (0x4 <<  5) // (LCDC) 16 Bits
#define 	AT91C_LCDC_PIXELSIZE_TWENTYFOURBITSPERPIXEL (0x5 <<  5) // (LCDC) 24 Bits
#define AT91C_LCDC_INVVD      (0x1 <<  8) // (LCDC) lcd datas polarity
#define 	AT91C_LCDC_INVVD_NORMALPOL            (0x0 <<  8) // (LCDC) Normal Polarity
#define 	AT91C_LCDC_INVVD_INVERTEDPOL          (0x1 <<  8) // (LCDC) Inverted Polarity
#define AT91C_LCDC_INVFRAME   (0x1 <<  9) // (LCDC) lcd vsync polarity
#define 	AT91C_LCDC_INVFRAME_NORMALPOL            (0x0 <<  9) // (LCDC) Normal Polarity
#define 	AT91C_LCDC_INVFRAME_INVERTEDPOL          (0x1 <<  9) // (LCDC) Inverted Polarity
#define AT91C_LCDC_INVLINE    (0x1 << 10) // (LCDC) lcd hsync polarity
#define 	AT91C_LCDC_INVLINE_NORMALPOL            (0x0 << 10) // (LCDC) Normal Polarity
#define 	AT91C_LCDC_INVLINE_INVERTEDPOL          (0x1 << 10) // (LCDC) Inverted Polarity
#define AT91C_LCDC_INVCLK     (0x1 << 11) // (LCDC) lcd pclk polarity
#define 	AT91C_LCDC_INVCLK_NORMALPOL            (0x0 << 11) // (LCDC) Normal Polarity
#define 	AT91C_LCDC_INVCLK_INVERTEDPOL          (0x1 << 11) // (LCDC) Inverted Polarity
#define AT91C_LCDC_INVDVAL    (0x1 << 12) // (LCDC) lcd dval polarity
#define 	AT91C_LCDC_INVDVAL_NORMALPOL            (0x0 << 12) // (LCDC) Normal Polarity
#define 	AT91C_LCDC_INVDVAL_INVERTEDPOL          (0x1 << 12) // (LCDC) Inverted Polarity
#define AT91C_LCDC_CLKMOD     (0x1 << 15) // (LCDC) lcd pclk Mode
#define 	AT91C_LCDC_CLKMOD_ACTIVEONLYDISP       (0x0 << 15) // (LCDC) Active during display period
#define 	AT91C_LCDC_CLKMOD_ALWAYSACTIVE         (0x1 << 15) // (LCDC) Always Active
#define AT91C_LCDC_MEMOR      (0x3 << 30) // (LCDC) Memory Ordering Format
#define 	AT91C_LCDC_MEMOR_BIGIND               (0x0 << 30) // (LCDC) Big Endian
#define 	AT91C_LCDC_MEMOR_LITTLEIND            (0x2 << 30) // (LCDC) Little Endian
// -------- LCDC_TIM1 : (LCDC Offset: 0x808) LCDC Timing Config 1 Register -------- 
#define AT91C_LCDC_VFP        (0xFF <<  0) // (LCDC) Vertical Front Porch
#define AT91C_LCDC_VBP        (0xFF <<  8) // (LCDC) Vertical Back Porch
#define AT91C_LCDC_VPW        (0x3F << 16) // (LCDC) Vertical Synchronization Pulse Width
#define AT91C_LCDC_VHDLY      (0xF << 24) // (LCDC) Vertical to Horizontal Delay
// -------- LCDC_TIM2 : (LCDC Offset: 0x80c) LCDC Timing Config 2 Register -------- 
#define AT91C_LCDC_HBP        (0xFF <<  0) // (LCDC) Horizontal Back Porch
#define AT91C_LCDC_HPW        (0x3F <<  8) // (LCDC) Horizontal Synchronization Pulse Width
#define AT91C_LCDC_HFP        (0x7FF << 21) // (LCDC) Horizontal Front Porch
// -------- LCDC_LCDFRCFG : (LCDC Offset: 0x810) LCD Frame Config Register -------- 
#define AT91C_LCDC_LINEVAL    (0x7FF <<  0) // (LCDC) Vertical Size of LCD Module
#define AT91C_LCDC_HOZVAL     (0x7FF << 21) // (LCDC) Horizontal Size of LCD Module
// -------- LCDC_FIFO : (LCDC Offset: 0x814) LCD FIFO Register -------- 
#define AT91C_LCDC_FIFOTH     (0xFFFF <<  0) // (LCDC) FIFO Threshold
// -------- LCDC_MVAL : (LCDC Offset: 0x818) LCD Mode Toggle Rate Value Register -------- 
#define AT91C_LCDC_MVALUE     (0xFF <<  0) // (LCDC) Toggle Rate Value
#define AT91C_LCDC_MMODE      (0x1 << 31) // (LCDC) Toggle Rate Sel
#define 	AT91C_LCDC_MMODE_EACHFRAME            (0x0 << 31) // (LCDC) Each Frame
#define 	AT91C_LCDC_MMODE_MVALDEFINED          (0x1 << 31) // (LCDC) Defined by MVAL
// -------- LCDC_DP1_2 : (LCDC Offset: 0x81c) Dithering Pattern 1/2 -------- 
#define AT91C_LCDC_DP1_2_FIELD (0xFF <<  0) // (LCDC) Ratio
// -------- LCDC_DP4_7 : (LCDC Offset: 0x820) Dithering Pattern 4/7 -------- 
#define AT91C_LCDC_DP4_7_FIELD (0xFFFFFFF <<  0) // (LCDC) Ratio
// -------- LCDC_DP3_5 : (LCDC Offset: 0x824) Dithering Pattern 3/5 -------- 
#define AT91C_LCDC_DP3_5_FIELD (0xFFFFF <<  0) // (LCDC) Ratio
// -------- LCDC_DP2_3 : (LCDC Offset: 0x828) Dithering Pattern 2/3 -------- 
#define AT91C_LCDC_DP2_3_FIELD (0xFFF <<  0) // (LCDC) Ratio
// -------- LCDC_DP5_7 : (LCDC Offset: 0x82c) Dithering Pattern 5/7 -------- 
#define AT91C_LCDC_DP5_7_FIELD (0xFFFFFFF <<  0) // (LCDC) Ratio
// -------- LCDC_DP3_4 : (LCDC Offset: 0x830) Dithering Pattern 3/4 -------- 
#define AT91C_LCDC_DP3_4_FIELD (0xFFFF <<  0) // (LCDC) Ratio
// -------- LCDC_DP4_5 : (LCDC Offset: 0x834) Dithering Pattern 4/5 -------- 
#define AT91C_LCDC_DP4_5_FIELD (0xFFFFF <<  0) // (LCDC) Ratio
// -------- LCDC_DP6_7 : (LCDC Offset: 0x838) Dithering Pattern 6/7 -------- 
#define AT91C_LCDC_DP6_7_FIELD (0xFFFFFFF <<  0) // (LCDC) Ratio
// -------- LCDC_PWRCON : (LCDC Offset: 0x83c) LCDC Power Control Register -------- 
#define AT91C_LCDC_PWR        (0x1 <<  0) // (LCDC) LCD Module Power Control
#define AT91C_LCDC_GUARDT     (0x7F <<  1) // (LCDC) Delay in Frame Period
#define AT91C_LCDC_BUSY       (0x1 << 31) // (LCDC) Read Only : 1 indicates that LCDC is busy
#define 	AT91C_LCDC_BUSY_LCDNOTBUSY           (0x0 << 31) // (LCDC) LCD is Not Busy
#define 	AT91C_LCDC_BUSY_LCDBUSY              (0x1 << 31) // (LCDC) LCD is Busy
// -------- LCDC_CTRSTCON : (LCDC Offset: 0x840) LCDC Contrast Control Register -------- 
#define AT91C_LCDC_PS         (0x3 <<  0) // (LCDC) LCD Contrast Counter Prescaler
#define 	AT91C_LCDC_PS_NOTDIVIDED           (0x0) // (LCDC) Counter Freq is System Freq.
#define 	AT91C_LCDC_PS_DIVIDEDBYTWO         (0x1) // (LCDC) Counter Freq is System Freq divided by 2.
#define 	AT91C_LCDC_PS_DIVIDEDBYFOUR        (0x2) // (LCDC) Counter Freq is System Freq divided by 4.
#define 	AT91C_LCDC_PS_DIVIDEDBYEIGHT       (0x3) // (LCDC) Counter Freq is System Freq divided by 8.
#define AT91C_LCDC_POL        (0x1 <<  2) // (LCDC) Polarity of output Pulse
#define 	AT91C_LCDC_POL_NEGATIVEPULSE        (0x0 <<  2) // (LCDC) Negative Pulse
#define 	AT91C_LCDC_POL_POSITIVEPULSE        (0x1 <<  2) // (LCDC) Positive Pulse
#define AT91C_LCDC_ENA        (0x1 <<  3) // (LCDC) PWM generator Control
#define 	AT91C_LCDC_ENA_PWMGEMDISABLED       (0x0 <<  3) // (LCDC) PWM Generator Disabled
#define 	AT91C_LCDC_ENA_PWMGEMENABLED        (0x1 <<  3) // (LCDC) PWM Generator Disabled
// -------- LCDC_CTRSTVAL : (LCDC Offset: 0x844) Contrast Value Register -------- 
#define AT91C_LCDC_CVAL       (0xFF <<  0) // (LCDC) PWM Compare Value
// -------- LCDC_IER : (LCDC Offset: 0x848) LCDC Interrupt Enable Register -------- 
#define AT91C_LCDC_LNI        (0x1 <<  0) // (LCDC) Line Interrupt
#define AT91C_LCDC_LSTLNI     (0x1 <<  1) // (LCDC) Last Line Interrupt
#define AT91C_LCDC_EOFI       (0x1 <<  2) // (LCDC) End Of Frame Interrupt
#define AT91C_LCDC_UFLWI      (0x1 <<  4) // (LCDC) FIFO Underflow Interrupt
#define AT91C_LCDC_OWRI       (0x1 <<  5) // (LCDC) Over Write Interrupt
#define AT91C_LCDC_MERI       (0x1 <<  6) // (LCDC) Memory Error  Interrupt
// -------- LCDC_IDR : (LCDC Offset: 0x84c) LCDC Interrupt Disable Register -------- 
// -------- LCDC_IMR : (LCDC Offset: 0x850) LCDC Interrupt Mask Register -------- 
// -------- LCDC_ISR : (LCDC Offset: 0x854) LCDC Interrupt Status Register -------- 
// -------- LCDC_ICR : (LCDC Offset: 0x858) LCDC Interrupt Clear Register -------- 
// -------- LCDC_GPR : (LCDC Offset: 0x85c) LCDC General Purpose Register -------- 
#define AT91C_LCDC_GPRBUS     (0xFF <<  0) // (LCDC) 8 bits available
// -------- LCDC_ITR : (LCDC Offset: 0x860) Interrupts Test Register -------- 
// -------- LCDC_IRR : (LCDC Offset: 0x864) Interrupts Raw Status Register -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR DMA controller from Synopsys
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_DMA {
	AT91_REG	 DMA_SAR0; 	// Source Address Register for channel 0
	AT91_REG	 Reserved0[1]; 	// 
	AT91_REG	 DMA_DAR0; 	// Destination Address Register for channel 0
	AT91_REG	 Reserved1[1]; 	// 
	AT91_REG	 DMA_LLP0; 	// Linked List Pointer Register for channel 0
	AT91_REG	 Reserved2[1]; 	// 
	AT91_REG	 DMA_CTL0l; 	// Control Register for channel 0 - low
	AT91_REG	 DMA_CTL0h; 	// Control Register for channel 0 - high
	AT91_REG	 DMA_SSTAT0; 	// Source Status Register for channel 0
	AT91_REG	 Reserved3[1]; 	// 
	AT91_REG	 DMA_DSTAT0; 	// Destination Status Register for channel 0
	AT91_REG	 Reserved4[1]; 	// 
	AT91_REG	 DMA_SSTATAR0; 	// Source Status Adress Register for channel 0
	AT91_REG	 Reserved5[1]; 	// 
	AT91_REG	 DMA_DSTATAR0; 	// Destination Status Adress Register for channel 0
	AT91_REG	 Reserved6[1]; 	// 
	AT91_REG	 DMA_CFG0l; 	// Configuration Register for channel 0 - low
	AT91_REG	 DMA_CFG0h; 	// Configuration Register for channel 0 - high
	AT91_REG	 DMA_SGR0; 	// Source Gather Register for channel 0
	AT91_REG	 Reserved7[1]; 	// 
	AT91_REG	 DMA_DSR0; 	// Destination Scatter Register for channel 0
	AT91_REG	 Reserved8[1]; 	// 
	AT91_REG	 DMA_SAR1; 	// Source Address Register for channel 1
	AT91_REG	 Reserved9[1]; 	// 
	AT91_REG	 DMA_DAR1; 	// Destination Address Register for channel 1
	AT91_REG	 Reserved10[1]; 	// 
	AT91_REG	 DMA_LLP1; 	// Linked List Pointer Register for channel 1
	AT91_REG	 Reserved11[1]; 	// 
	AT91_REG	 DMA_CTL1l; 	// Control Register for channel 1 - low
	AT91_REG	 DMA_CTL1h; 	// Control Register for channel 1 - high
	AT91_REG	 DMA_SSTAT1; 	// Source Status Register for channel 1
	AT91_REG	 Reserved12[1]; 	// 
	AT91_REG	 DMA_DSTAT1; 	// Destination Status Register for channel 1
	AT91_REG	 Reserved13[1]; 	// 
	AT91_REG	 DMA_SSTATAR1; 	// Source Status Adress Register for channel 1
	AT91_REG	 Reserved14[1]; 	// 
	AT91_REG	 DMA_DSTATAR1; 	// Destination Status Adress Register for channel 1
	AT91_REG	 Reserved15[1]; 	// 
	AT91_REG	 DMA_CFG1l; 	// Configuration Register for channel 1 - low
	AT91_REG	 DMA_CFG1h; 	// Configuration Register for channel 1 - high
	AT91_REG	 DMA_SGR1; 	// Source Gather Register for channel 1
	AT91_REG	 Reserved16[1]; 	// 
	AT91_REG	 DMA_DSR1; 	// Destination Scatter Register for channel 1
	AT91_REG	 Reserved17[133]; 	// 
	AT91_REG	 DMA_RAWTFR; 	// Raw Status for IntTfr Interrupt
	AT91_REG	 Reserved18[1]; 	// 
	AT91_REG	 DMA_RAWBLOCK; 	// Raw Status for IntBlock Interrupt
	AT91_REG	 Reserved19[1]; 	// 
	AT91_REG	 DMA_RAWSRCTRAN; 	// Raw Status for IntSrcTran Interrupt
	AT91_REG	 Reserved20[1]; 	// 
	AT91_REG	 DMA_RAWDSTTRAN; 	// Raw Status for IntDstTran Interrupt
	AT91_REG	 Reserved21[1]; 	// 
	AT91_REG	 DMA_RAWERR; 	// Raw Status for IntErr Interrupt
	AT91_REG	 Reserved22[1]; 	// 
	AT91_REG	 DMA_STATUSTFR; 	// Status for IntTfr Interrupt
	AT91_REG	 Reserved23[1]; 	// 
	AT91_REG	 DMA_STATUSBLOCK; 	// Status for IntBlock Interrupt
	AT91_REG	 Reserved24[1]; 	// 
	AT91_REG	 DMA_STATUSSRCTRAN; 	// Status for IntSrcTran Interrupt
	AT91_REG	 Reserved25[1]; 	// 
	AT91_REG	 DMA_STATUSDSTTRAN; 	// Status for IntDstTran IInterrupt
	AT91_REG	 Reserved26[1]; 	// 
	AT91_REG	 DMA_STATUSERR; 	// Status for IntErr IInterrupt
	AT91_REG	 Reserved27[1]; 	// 
	AT91_REG	 DMA_MASKTFR; 	// Mask for IntTfr Interrupt
	AT91_REG	 Reserved28[1]; 	// 
	AT91_REG	 DMA_MASKBLOCK; 	// Mask for IntBlock Interrupt
	AT91_REG	 Reserved29[1]; 	// 
	AT91_REG	 DMA_MASKSRCTRAN; 	// Mask for IntSrcTran Interrupt
	AT91_REG	 Reserved30[1]; 	// 
	AT91_REG	 DMA_MASKDSTTRAN; 	// Mask for IntDstTran Interrupt
	AT91_REG	 Reserved31[1]; 	// 
	AT91_REG	 DMA_MASKERR; 	// Mask for IntErr Interrupt
	AT91_REG	 Reserved32[1]; 	// 
	AT91_REG	 DMA_CLEARTFR; 	// Clear for IntTfr Interrupt
	AT91_REG	 Reserved33[1]; 	// 
	AT91_REG	 DMA_CLEARBLOCK; 	// Clear for IntBlock Interrupt
	AT91_REG	 Reserved34[1]; 	// 
	AT91_REG	 DMA_CLEARSRCTRAN; 	// Clear for IntSrcTran Interrupt
	AT91_REG	 Reserved35[1]; 	// 
	AT91_REG	 DMA_CLEARDSTTRAN; 	// Clear for IntDstTran IInterrupt
	AT91_REG	 Reserved36[1]; 	// 
	AT91_REG	 DMA_CLEARERR; 	// Clear for IntErr Interrupt
	AT91_REG	 Reserved37[1]; 	// 
	AT91_REG	 DMA_STATUSINT; 	// Status for each Interrupt Type
	AT91_REG	 Reserved38[1]; 	// 
	AT91_REG	 DMA_REQSRCREG; 	// Source Software Transaction Request Register
	AT91_REG	 Reserved39[1]; 	// 
	AT91_REG	 DMA_REQDSTREG; 	// Destination Software Transaction Request Register
	AT91_REG	 Reserved40[1]; 	// 
	AT91_REG	 DMA_SGLREQSRCREG; 	// Single Source Software Transaction Request Register
	AT91_REG	 Reserved41[1]; 	// 
	AT91_REG	 DMA_SGLREQDSTREG; 	// Single Destination Software Transaction Request Register
	AT91_REG	 Reserved42[1]; 	// 
	AT91_REG	 DMA_LSTREQSRCREG; 	// Last Source Software Transaction Request Register
	AT91_REG	 Reserved43[1]; 	// 
	AT91_REG	 DMA_LSTREQDSTREG; 	// Last Destination Software Transaction Request Register
	AT91_REG	 Reserved44[1]; 	// 
	AT91_REG	 DMA_DMACFGREG; 	// DW_ahb_dmac Configuration Register
	AT91_REG	 Reserved45[1]; 	// 
	AT91_REG	 DMA_CHENREG; 	// DW_ahb_dmac Channel Enable Register
	AT91_REG	 Reserved46[1]; 	// 
	AT91_REG	 DMA_DMAIDREG; 	// DW_ahb_dmac ID Register
	AT91_REG	 Reserved47[1]; 	// 
	AT91_REG	 DMA_DMATESTREG; 	// DW_ahb_dmac Test Register
	AT91_REG	 Reserved48[1]; 	// 
	AT91_REG	 DMA_VERSIONID; 	// DW_ahb_dmac Version ID Register
} AT91S_DMA, *AT91PS_DMA;
#else
#define DMA_SAR0        (AT91_CAST(AT91_REG *) 	0x00000000) // (DMA_SAR0) Source Address Register for channel 0
#define DMA_DAR0        (AT91_CAST(AT91_REG *) 	0x00000008) // (DMA_DAR0) Destination Address Register for channel 0
#define DMA_LLP0        (AT91_CAST(AT91_REG *) 	0x00000010) // (DMA_LLP0) Linked List Pointer Register for channel 0
#define DMA_CTL0l       (AT91_CAST(AT91_REG *) 	0x00000018) // (DMA_CTL0l) Control Register for channel 0 - low
#define DMA_CTL0h       (AT91_CAST(AT91_REG *) 	0x0000001C) // (DMA_CTL0h) Control Register for channel 0 - high
#define DMA_SSTAT0      (AT91_CAST(AT91_REG *) 	0x00000020) // (DMA_SSTAT0) Source Status Register for channel 0
#define DMA_DSTAT0      (AT91_CAST(AT91_REG *) 	0x00000028) // (DMA_DSTAT0) Destination Status Register for channel 0
#define DMA_SSTATAR0    (AT91_CAST(AT91_REG *) 	0x00000030) // (DMA_SSTATAR0) Source Status Adress Register for channel 0
#define DMA_DSTATAR0    (AT91_CAST(AT91_REG *) 	0x00000038) // (DMA_DSTATAR0) Destination Status Adress Register for channel 0
#define DMA_CFG0l       (AT91_CAST(AT91_REG *) 	0x00000040) // (DMA_CFG0l) Configuration Register for channel 0 - low
#define DMA_CFG0h       (AT91_CAST(AT91_REG *) 	0x00000044) // (DMA_CFG0h) Configuration Register for channel 0 - high
#define DMA_SGR0        (AT91_CAST(AT91_REG *) 	0x00000048) // (DMA_SGR0) Source Gather Register for channel 0
#define DMA_DSR0        (AT91_CAST(AT91_REG *) 	0x00000050) // (DMA_DSR0) Destination Scatter Register for channel 0
#define DMA_SAR1        (AT91_CAST(AT91_REG *) 	0x00000058) // (DMA_SAR1) Source Address Register for channel 1
#define DMA_DAR1        (AT91_CAST(AT91_REG *) 	0x00000060) // (DMA_DAR1) Destination Address Register for channel 1
#define DMA_LLP1        (AT91_CAST(AT91_REG *) 	0x00000068) // (DMA_LLP1) Linked List Pointer Register for channel 1
#define DMA_CTL1l       (AT91_CAST(AT91_REG *) 	0x00000070) // (DMA_CTL1l) Control Register for channel 1 - low
#define DMA_CTL1h       (AT91_CAST(AT91_REG *) 	0x00000074) // (DMA_CTL1h) Control Register for channel 1 - high
#define DMA_SSTAT1      (AT91_CAST(AT91_REG *) 	0x00000078) // (DMA_SSTAT1) Source Status Register for channel 1
#define DMA_DSTAT1      (AT91_CAST(AT91_REG *) 	0x00000080) // (DMA_DSTAT1) Destination Status Register for channel 1
#define DMA_SSTATAR1    (AT91_CAST(AT91_REG *) 	0x00000088) // (DMA_SSTATAR1) Source Status Adress Register for channel 1
#define DMA_DSTATAR1    (AT91_CAST(AT91_REG *) 	0x00000090) // (DMA_DSTATAR1) Destination Status Adress Register for channel 1
#define DMA_CFG1l       (AT91_CAST(AT91_REG *) 	0x00000098) // (DMA_CFG1l) Configuration Register for channel 1 - low
#define DMA_CFG1h       (AT91_CAST(AT91_REG *) 	0x0000009C) // (DMA_CFG1h) Configuration Register for channel 1 - high
#define DMA_SGR1        (AT91_CAST(AT91_REG *) 	0x000000A0) // (DMA_SGR1) Source Gather Register for channel 1
#define DMA_DSR1        (AT91_CAST(AT91_REG *) 	0x000000A8) // (DMA_DSR1) Destination Scatter Register for channel 1
#define DMA_RAWTFR      (AT91_CAST(AT91_REG *) 	0x000002C0) // (DMA_RAWTFR) Raw Status for IntTfr Interrupt
#define DMA_RAWBLOCK    (AT91_CAST(AT91_REG *) 	0x000002C8) // (DMA_RAWBLOCK) Raw Status for IntBlock Interrupt
#define DMA_RAWSRCTRAN  (AT91_CAST(AT91_REG *) 	0x000002D0) // (DMA_RAWSRCTRAN) Raw Status for IntSrcTran Interrupt
#define DMA_RAWDSTTRAN  (AT91_CAST(AT91_REG *) 	0x000002D8) // (DMA_RAWDSTTRAN) Raw Status for IntDstTran Interrupt
#define DMA_RAWERR      (AT91_CAST(AT91_REG *) 	0x000002E0) // (DMA_RAWERR) Raw Status for IntErr Interrupt
#define DMA_STATUSTFR   (AT91_CAST(AT91_REG *) 	0x000002E8) // (DMA_STATUSTFR) Status for IntTfr Interrupt
#define DMA_STATUSBLOCK (AT91_CAST(AT91_REG *) 	0x000002F0) // (DMA_STATUSBLOCK) Status for IntBlock Interrupt
#define DMA_STATUSSRCTRAN (AT91_CAST(AT91_REG *) 	0x000002F8) // (DMA_STATUSSRCTRAN) Status for IntSrcTran Interrupt
#define DMA_STATUSDSTTRAN (AT91_CAST(AT91_REG *) 	0x00000300) // (DMA_STATUSDSTTRAN) Status for IntDstTran IInterrupt
#define DMA_STATUSERR   (AT91_CAST(AT91_REG *) 	0x00000308) // (DMA_STATUSERR) Status for IntErr IInterrupt
#define DMA_MASKTFR     (AT91_CAST(AT91_REG *) 	0x00000310) // (DMA_MASKTFR) Mask for IntTfr Interrupt
#define DMA_MASKBLOCK   (AT91_CAST(AT91_REG *) 	0x00000318) // (DMA_MASKBLOCK) Mask for IntBlock Interrupt
#define DMA_MASKSRCTRAN (AT91_CAST(AT91_REG *) 	0x00000320) // (DMA_MASKSRCTRAN) Mask for IntSrcTran Interrupt
#define DMA_MASKDSTTRAN (AT91_CAST(AT91_REG *) 	0x00000328) // (DMA_MASKDSTTRAN) Mask for IntDstTran Interrupt
#define DMA_MASKERR     (AT91_CAST(AT91_REG *) 	0x00000330) // (DMA_MASKERR) Mask for IntErr Interrupt
#define DMA_CLEARTFR    (AT91_CAST(AT91_REG *) 	0x00000338) // (DMA_CLEARTFR) Clear for IntTfr Interrupt
#define DMA_CLEARBLOCK  (AT91_CAST(AT91_REG *) 	0x00000340) // (DMA_CLEARBLOCK) Clear for IntBlock Interrupt
#define DMA_CLEARSRCTRAN (AT91_CAST(AT91_REG *) 	0x00000348) // (DMA_CLEARSRCTRAN) Clear for IntSrcTran Interrupt
#define DMA_CLEARDSTTRAN (AT91_CAST(AT91_REG *) 	0x00000350) // (DMA_CLEARDSTTRAN) Clear for IntDstTran IInterrupt
#define DMA_CLEARERR    (AT91_CAST(AT91_REG *) 	0x00000358) // (DMA_CLEARERR) Clear for IntErr Interrupt
#define DMA_STATUSINT   (AT91_CAST(AT91_REG *) 	0x00000360) // (DMA_STATUSINT) Status for each Interrupt Type
#define DMA_REQSRCREG   (AT91_CAST(AT91_REG *) 	0x00000368) // (DMA_REQSRCREG) Source Software Transaction Request Register
#define DMA_REQDSTREG   (AT91_CAST(AT91_REG *) 	0x00000370) // (DMA_REQDSTREG) Destination Software Transaction Request Register
#define DMA_SGLREQSRCREG (AT91_CAST(AT91_REG *) 	0x00000378) // (DMA_SGLREQSRCREG) Single Source Software Transaction Request Register
#define DMA_SGLREQDSTREG (AT91_CAST(AT91_REG *) 	0x00000380) // (DMA_SGLREQDSTREG) Single Destination Software Transaction Request Register
#define DMA_LSTREQSRCREG (AT91_CAST(AT91_REG *) 	0x00000388) // (DMA_LSTREQSRCREG) Last Source Software Transaction Request Register
#define DMA_LSTREQDSTREG (AT91_CAST(AT91_REG *) 	0x00000390) // (DMA_LSTREQDSTREG) Last Destination Software Transaction Request Register
#define DMA_DMACFGREG   (AT91_CAST(AT91_REG *) 	0x00000398) // (DMA_DMACFGREG) DW_ahb_dmac Configuration Register
#define DMA_CHENREG     (AT91_CAST(AT91_REG *) 	0x000003A0) // (DMA_CHENREG) DW_ahb_dmac Channel Enable Register
#define DMA_DMAIDREG    (AT91_CAST(AT91_REG *) 	0x000003A8) // (DMA_DMAIDREG) DW_ahb_dmac ID Register
#define DMA_DMATESTREG  (AT91_CAST(AT91_REG *) 	0x000003B0) // (DMA_DMATESTREG) DW_ahb_dmac Test Register
#define DMA_VERSIONID   (AT91_CAST(AT91_REG *) 	0x000003B8) // (DMA_VERSIONID) DW_ahb_dmac Version ID Register

#endif
// -------- DMA_SAR : (DMA Offset: 0x0)  -------- 
#define AT91C_DMA_SADD        (0x0 <<  0) // (DMA) Source Address of DMA Transfer
// -------- DMA_DAR : (DMA Offset: 0x8)  -------- 
#define AT91C_DMA_DADD        (0x0 <<  0) // (DMA) Destination Address of DMA Transfer
// -------- DMA_LLP : (DMA Offset: 0x10)  -------- 
#define AT91C_DMA_LOC         (0x0 <<  0) // (DMA) Address of the Next LLI
// -------- DMA_CTLl : (DMA Offset: 0x18)  -------- 
#define AT91C_DMA_INT_EN      (0x1 <<  0) // (DMA) Interrupt Enable Bit
#define AT91C_DMA_DST_TR_WIDTH (0x7 <<  1) // (DMA) Destination Transfer Width
#define AT91C_DMA_SRC_TR_WIDTH (0x7 <<  4) // (DMA) Source Transfer Width
#define AT91C_DMA_DINC        (0x3 <<  7) // (DMA) Destination Address Increment
#define AT91C_DMA_SINC        (0x3 <<  9) // (DMA) Source Address Increment
#define AT91C_DMA_DEST_MSIZE  (0x7 << 11) // (DMA) Destination Burst Transaction Length
#define AT91C_DMA_SRC_MSIZE   (0x7 << 14) // (DMA) Source Burst Transaction Length
#define AT91C_DMA_S_GATH_EN   (0x1 << 17) // (DMA) Source Gather Enable Bit
#define AT91C_DMA_D_SCAT_EN   (0x1 << 18) // (DMA) Destination Scatter Enable Bit
#define AT91C_DMA_TT_FC       (0x7 << 20) // (DMA) Transfer Type and Flow Control
#define AT91C_DMA_DMS         (0x3 << 23) // (DMA) Destination Master Select
#define AT91C_DMA_SMS         (0x3 << 25) // (DMA) Source Master Select
#define AT91C_DMA_LLP_D_EN    (0x1 << 27) // (DMA) Destination Block Chaining Enable
#define AT91C_DMA_LLP_S_EN    (0x1 << 28) // (DMA) Source Block Chaining Enable
// -------- DMA_CTLh : (DMA Offset: 0x1c)  -------- 
#define AT91C_DMA_BLOCK_TS    (0xFFF <<  0) // (DMA) Block Transfer Size
#define AT91C_DMA_DONE        (0x1 << 12) // (DMA) Done bit
// -------- DMA_CFGl : (DMA Offset: 0x40)  -------- 
#define AT91C_DMA_CH_PRIOR    (0x7 <<  5) // (DMA) Channel Priority
#define AT91C_DMA_CH_SUSP     (0x1 <<  8) // (DMA) Channel Suspend
#define AT91C_DMA_FIFO_EMPT   (0x1 <<  9) // (DMA) Fifo Empty
#define AT91C_DMA_HS_SEL_DS   (0x1 << 10) // (DMA) Destination Software or Hardware Handshaking Select
#define AT91C_DMA_HS_SEL_SR   (0x1 << 11) // (DMA) Source Software or Hardware Handshaking Select
#define AT91C_DMA_LOCK_CH_L   (0x3 << 12) // (DMA) Channel Lock Level
#define AT91C_DMA_LOCK_B_L    (0x3 << 14) // (DMA) Bus Lock Level
#define AT91C_DMA_LOCK_CH     (0x1 << 16) // (DMA) Channel Lock Bit
#define AT91C_DMA_LOCK_B      (0x1 << 17) // (DMA) Bus Lock Bit
#define AT91C_DMA_DS_HS_POL   (0x1 << 18) // (DMA) Destination Handshaking Interface Polarity
#define AT91C_DMA_SR_HS_POL   (0x1 << 19) // (DMA) Source Handshaking Interface Polarity
#define AT91C_DMA_MAX_ABRST   (0x3FF << 20) // (DMA) Maximum AMBA Burst Length
#define AT91C_DMA_RELOAD_SR   (0x1 << 30) // (DMA) Automatic Source Reload
#define AT91C_DMA_RELOAD_DS   (0x1 << 31) // (DMA) Automatic Destination Reload
// -------- DMA_CFGh : (DMA Offset: 0x44)  -------- 
#define AT91C_DMA_FCMODE      (0x1 <<  0) // (DMA) Flow Control Mode
#define AT91C_DMA_FIFO_MODE   (0x1 <<  1) // (DMA) Fifo Mode Select
#define AT91C_DMA_PROTCTL     (0x7 <<  2) // (DMA) Protection Control
#define AT91C_DMA_DS_UPD_EN   (0x1 <<  5) // (DMA) Destination Status Update Enable
#define AT91C_DMA_SS_UPD_EN   (0x1 <<  6) // (DMA) Source Status Update Enable
#define AT91C_DMA_SRC_PER     (0xF <<  7) // (DMA) Source Hardware Handshaking Interface
#define AT91C_DMA_DEST_PER    (0xF << 11) // (DMA) Destination Hardware Handshaking Interface
// -------- DMA_SGR : (DMA Offset: 0x48)  -------- 
#define AT91C_DMA_SGI         (0xFFFFF <<  0) // (DMA) Source Gather Interval
#define AT91C_DMA_SGC         (0xFFF << 20) // (DMA) Source Gather Count
// -------- DMA_DSR : (DMA Offset: 0x50)  -------- 
#define AT91C_DMA_DSI         (0xFFFFF <<  0) // (DMA) Destination Scatter Interval
#define AT91C_DMA_DSC         (0xFFF << 20) // (DMA) Destination Scatter Count
// -------- DMA_SAR : (DMA Offset: 0x58)  -------- 
// -------- DMA_DAR : (DMA Offset: 0x60)  -------- 
// -------- DMA_LLP : (DMA Offset: 0x68)  -------- 
// -------- DMA_CTLl : (DMA Offset: 0x70)  -------- 
// -------- DMA_CTLh : (DMA Offset: 0x74)  -------- 
// -------- DMA_CFGl : (DMA Offset: 0x98)  -------- 
// -------- DMA_CFGh : (DMA Offset: 0x9c)  -------- 
// -------- DMA_SGR : (DMA Offset: 0xa0)  -------- 
// -------- DMA_DSR : (DMA Offset: 0xa8)  -------- 
// -------- DMA_RAWTFR : (DMA Offset: 0x2c0)  -------- 
#define AT91C_DMA_RAW         (0x7 <<  0) // (DMA) Raw Interrupt for each Channel
// -------- DMA_RAWBLOCK : (DMA Offset: 0x2c8)  -------- 
// -------- DMA_RAWSRCTRAN : (DMA Offset: 0x2d0)  -------- 
// -------- DMA_RAWDSTTRAN : (DMA Offset: 0x2d8)  -------- 
// -------- DMA_RAWERR : (DMA Offset: 0x2e0)  -------- 
// -------- DMA_STATUSTFR : (DMA Offset: 0x2e8)  -------- 
#define AT91C_DMA_STATUS      (0x7 <<  0) // (DMA) Interrupt for each Channel
// -------- DMA_STATUSBLOCK : (DMA Offset: 0x2f0)  -------- 
// -------- DMA_STATUSSRCTRAN : (DMA Offset: 0x2f8)  -------- 
// -------- DMA_STATUSDSTTRAN : (DMA Offset: 0x300)  -------- 
// -------- DMA_STATUSERR : (DMA Offset: 0x308)  -------- 
// -------- DMA_MASKTFR : (DMA Offset: 0x310)  -------- 
#define AT91C_DMA_INT_MASK    (0x7 <<  0) // (DMA) Interrupt Mask for each Channel
#define AT91C_DMA_INT_M_WE    (0x7 <<  8) // (DMA) Interrupt Mask Write Enable for each Channel
// -------- DMA_MASKBLOCK : (DMA Offset: 0x318)  -------- 
// -------- DMA_MASKSRCTRAN : (DMA Offset: 0x320)  -------- 
// -------- DMA_MASKDSTTRAN : (DMA Offset: 0x328)  -------- 
// -------- DMA_MASKERR : (DMA Offset: 0x330)  -------- 
// -------- DMA_CLEARTFR : (DMA Offset: 0x338)  -------- 
#define AT91C_DMA_CLEAR       (0x7 <<  0) // (DMA) Interrupt Clear for each Channel
// -------- DMA_CLEARBLOCK : (DMA Offset: 0x340)  -------- 
// -------- DMA_CLEARSRCTRAN : (DMA Offset: 0x348)  -------- 
// -------- DMA_CLEARDSTTRAN : (DMA Offset: 0x350)  -------- 
// -------- DMA_CLEARERR : (DMA Offset: 0x358)  -------- 
// -------- DMA_STATUSINT : (DMA Offset: 0x360)  -------- 
#define AT91C_DMA_TFR         (0x1 <<  0) // (DMA) OR of the content of StatusTfr Register
#define AT91C_DMA_BLOCK       (0x1 <<  1) // (DMA) OR of the content of StatusBlock Register
#define AT91C_DMA_SRCT        (0x1 <<  2) // (DMA) OR of the content of StatusSrcTran Register
#define AT91C_DMA_DSTT        (0x1 <<  3) // (DMA) OR of the content of StatusDstTran Register
#define AT91C_DMA_ERR         (0x1 <<  4) // (DMA) OR of the content of StatusErr Register
// -------- DMA_REQSRCREG : (DMA Offset: 0x368)  -------- 
#define AT91C_DMA_SRC_REQ     (0x7 <<  0) // (DMA) Source Request
#define AT91C_DMA_REQ_WE      (0x7 <<  8) // (DMA) Request Write Enable
// -------- DMA_REQDSTREG : (DMA Offset: 0x370)  -------- 
#define AT91C_DMA_DST_REQ     (0x7 <<  0) // (DMA) Destination Request
// -------- DMA_SGLREQSRCREG : (DMA Offset: 0x378)  -------- 
#define AT91C_DMA_S_SG_REQ    (0x7 <<  0) // (DMA) Source Single Request
// -------- DMA_SGLREQDSTREG : (DMA Offset: 0x380)  -------- 
#define AT91C_DMA_D_SG_REQ    (0x7 <<  0) // (DMA) Destination Single Request
// -------- DMA_LSTREQSRCREG : (DMA Offset: 0x388)  -------- 
#define AT91C_DMA_LSTSRC      (0x7 <<  0) // (DMA) Source Last Transaction Request
#define AT91C_DMA_LSTSR_WE    (0x7 <<  8) // (DMA) Source Last Transaction Request Write Enable
// -------- DMA_LSTREQDSTREG : (DMA Offset: 0x390)  -------- 
#define AT91C_DMA_LSTDST      (0x7 <<  0) // (DMA) Destination Last Transaction Request
#define AT91C_DMA_LSTDS_WE    (0x7 <<  8) // (DMA) Destination Last Transaction Request Write Enable
// -------- DMA_DMACFGREG : (DMA Offset: 0x398)  -------- 
#define AT91C_DMA_DMA_EN      (0x7 <<  0) // (DMA) Controller Enable
// -------- DMA_CHENREG : (DMA Offset: 0x3a0)  -------- 
#define AT91C_DMA_CH_EN       (0x7 <<  0) // (DMA) Channel Enable
#define AT91C_DMA_CH_EN_WE    (0x7 <<  8) // (DMA) Channel Enable Write Enable
// -------- DMA_DMATESTREG : (DMA Offset: 0x3b0)  -------- 
#define AT91C_DMA_TEST_SLV_IF (0x1 <<  0) // (DMA) Test Mode for Slave Interface

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR USB OTG Controller
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_OTG {
	AT91_REG	 OTG_InTxFifo; 	// OTG IN TX FIFO. In Host mode, acts as a RX FIFO, in Device mode acts as a TX FIFO
	AT91_REG	 Reserved0[255]; 	// 
	AT91_REG	 OTG_DevTxFifo1; 	// OTG IN TX FIFO for EP1 in Device mode
	AT91_REG	 Reserved1[255]; 	// 
	AT91_REG	 OTG_DevTxFifo2; 	// OTG IN TX FIFO for EP2 in Device mode
	AT91_REG	 Reserved2[255]; 	// 
	AT91_REG	 OTG_DevTxFifo3; 	// OTG IN TX FIFO for EP3 in Device mode
	AT91_REG	 Reserved3[255]; 	// 
	AT91_REG	 OTG_DevTxFifo4; 	// OTG IN TX FIFO for EP4 in Device mode
	AT91_REG	 Reserved4[255]; 	// 
	AT91_REG	 OTG_DevTxFifo5; 	// OTG IN TX FIFO for EP5 in Device mode
	AT91_REG	 Reserved5[2815]; 	// 
	AT91_REG	 OTG_OutRxFifo; 	// OTG OUT RX FIFO. In Host mode, acts as a TX FIFO, in Device mode, acts as a RX FIFO
	AT91_REG	 Reserved6[255]; 	// 
	AT91_REG	 OTG_DevTxControl0; 	// IN EP0 TX Control Reg (Device mode)
	AT91_REG	 OTG_DevTxStatus0; 	// IN EP0 TX Status Reg (Device mode)
	AT91_REG	 OTG_DevTxFifoSize0; 	// IN EP0 TX FIFO Size Reg (Device mode)
	AT91_REG	 OTG_DevTxCount0; 	// IN EP0 TX Transfert Size Reg (Device mode)
	AT91_REG	 OTG_DevTxControl1; 	// IN EP1 TX Control Reg (Device mode)
	AT91_REG	 OTG_DevTxStatus1; 	// IN EP1 TX Status Reg (Device mode)
	AT91_REG	 OTG_DevTxFifoSize1; 	// IN EP1 TX FIFO Size Reg (Device mode)
	AT91_REG	 OTG_DevTxCount1; 	// IN EP1 TX Transfert Size Reg (Device mode)
	AT91_REG	 OTG_DevTxControl2; 	// IN EP2 TX Control Reg (Device mode)
	AT91_REG	 OTG_DevTxStatus2; 	// IN EP2 TX Status Reg (Device mode)
	AT91_REG	 OTG_DevTxFifoSize2; 	// IN EP2 TX FIFO Size Reg (Device mode)
	AT91_REG	 OTG_DevTxCount2; 	// IN EP2 TX Transfert Size Reg (Device mode)
	AT91_REG	 OTG_DevTxControl3; 	// IN EP3 TX Control Reg (Device mode)
	AT91_REG	 OTG_DevTxStatus3; 	// IN EP3 TX Status Reg (Device mode)
	AT91_REG	 OTG_DevTxFifoSize3; 	// IN EP3 TX FIFO Size Reg (Device mode)
	AT91_REG	 OTG_DevTxCount3; 	// IN EP3 TX Transfert Size Reg (Device mode)
	AT91_REG	 OTG_DevTxControl4; 	// IN EP4 TX Control Reg (Device mode)
	AT91_REG	 OTG_DevTxStatus4; 	// IN EP4 TX Status Reg (Device mode)
	AT91_REG	 OTG_DevTxFifoSize4; 	// IN EP4 TX FIFO Size Reg (Device mode)
	AT91_REG	 OTG_DevTxCount4; 	// IN EP4 TX Transfert Size Reg (Device mode)
	AT91_REG	 OTG_DevTxControl5; 	// IN EP5 TX Control Reg (Device mode)
	AT91_REG	 OTG_DevTxStatus5; 	// IN EP5 TX Status Reg (Device mode)
	AT91_REG	 OTG_DevTxFifoSize5; 	// IN EP5 TX FIFO Size Reg (Device mode)
	AT91_REG	 OTG_DevTxCount5; 	// IN EP5 TX Transfert Size Reg (Device mode)
	AT91_REG	 Reserved7[40]; 	// 
	AT91_REG	 OTG_DevRxControl0; 	// OUT EP0 RX Control Reg (Device mode)
	AT91_REG	 Reserved8[3]; 	// 
	AT91_REG	 OTG_DevRxControl1; 	// OUT EP1 RX Control Reg (Device mode)
	AT91_REG	 Reserved9[3]; 	// 
	AT91_REG	 OTG_DevRxControl2; 	// OUT EP2 RX Control Reg (Device mode)
	AT91_REG	 Reserved10[3]; 	// 
	AT91_REG	 OTG_DevRxControl3; 	// OUT EP3 RX Control Reg (Device mode)
	AT91_REG	 Reserved11[3]; 	// 
	AT91_REG	 OTG_DevRxControl4; 	// OUT EP4 RX Control Reg (Device mode)
	AT91_REG	 Reserved12[3]; 	// 
	AT91_REG	 OTG_DevRxControl5; 	// OUT EP5 RX Control Reg (Device mode)
	AT91_REG	 Reserved13[43]; 	// 
	AT91_REG	 OTG_DevConfig; 	// Configure the device (Device mode)
	AT91_REG	 OTG_DevStatus; 	// Reflects status information needed to service some interrupts (Device mode)
	AT91_REG	 OTG_DevIntr; 	// Device Interrupt Register (Device mode)
	AT91_REG	 OTG_DevIntrMask; 	// Device Interrupt enable Register (Device mode)
	AT91_REG	 OTG_DevRxFifoSize; 	// OUT EP RX FIFO Size Reg (Device mode)
	AT91_REG	 OTG_DevEnpIntrMask; 	// Global EP Interrupt Enable Reg (Device mode)
	AT91_REG	 OTG_DevThreshold; 	// Threshold Reg (Device mode)
	AT91_REG	 OTG_DevRxStatus; 	// OUT EP RX FIFO Status Reg (Device mode)
	AT91_REG	 OTG_DevSetupStatus; 	// Setup RX FIFO Status Reg (Device mode)
	AT91_REG	 OTG_DevEnpIntr; 	// Global EP Interrupt Reg (Device mode)
	AT91_REG	 OTG_DevFrameNum; 	// Frame Number Reg (Device mode)
	AT91_REG	 Reserved14[53]; 	// 
	AT91_REG	 OTG_DevSetupDataLow; 	// Setup Data 1st DWORD (Device mode)
	AT91_REG	 OTG_DevSetupDataHigh; 	// Setup Data 1st DWORD (Device mode)
	AT91_REG	 OTG_Biu; 	// Slave BIU Delay Count Reg (Device and Host modes)
	AT91_REG	 OTG_TWI; 	// *TWI Reg (Device and Host mode)
	AT91_REG	 Reserved15[61]; 	// 
	AT91_REG	 OTG_DevEpNe0; 	// EP0 NE Reg (Device mode)
	AT91_REG	 OTG_DevEpNe1; 	// EP1 NE Reg (Device mode)
	AT91_REG	 OTG_DevEpNe2; 	// EP2 NE Reg (Device mode)
	AT91_REG	 OTG_DevEpNe3; 	// EP3 NE Reg (Device mode)
	AT91_REG	 OTG_DevEpNe4; 	// EP4 NE Reg (Device mode)
	AT91_REG	 OTG_DevEpNe5; 	// EP5 NE Reg (Device mode)
	AT91_REG	 Reserved16[249]; 	// 
	AT91_REG	 OTG_HostIntr; 	// Interrupt Reg (Host mode)
	AT91_REG	 OTG_HostIntrMask; 	// Interrupt Enable Reg (Host mode)
	AT91_REG	 OTG_HostStatus; 	// Status Reg (Host mode)
	AT91_REG	 OTG_HostFifoControl; 	// Host Control Reg (Host mode)
	AT91_REG	 OTG_HostFifoSize; 	// FIFO Size Reg (Host mode)
	AT91_REG	 OTG_HostThreshold; 	// Threshold Reg (Host mode)
	AT91_REG	 OTG_HostTxCount; 	// OUT Transfert Size Reg (Host mode)
	AT91_REG	 Reserved17[262]; 	// 
	AT91_REG	 OTG_HostFrameIntvl; 	// Frame Interval Reg (Host mode)
	AT91_REG	 OTG_HostFrameRem; 	// Frame Remaining Reg (Host mode)
	AT91_REG	 OTG_HostFrameNum; 	// Frame Number Reg (Host mode)
	AT91_REG	 Reserved18[5]; 	// 
	AT91_REG	 OTG_HostRootHubPort0; 	// Port Status Change Control Reg (Host mode)
	AT91_REG	 Reserved19[14]; 	// 
	AT91_REG	 OTG_HostToken; 	// Token Reg (Host mode)
	AT91_REG	 OTG_CtrlStatus; 	// Control and Status Reg (Device and Host mode)
} AT91S_OTG, *AT91PS_OTG;
#else
#define InTxFifo        (AT91_CAST(AT91_REG *) 	0x00000000) // (InTxFifo) OTG IN TX FIFO. In Host mode, acts as a RX FIFO, in Device mode acts as a TX FIFO
#define DevTxFifo1      (AT91_CAST(AT91_REG *) 	0x00000400) // (DevTxFifo1) OTG IN TX FIFO for EP1 in Device mode
#define DevTxFifo2      (AT91_CAST(AT91_REG *) 	0x00000800) // (DevTxFifo2) OTG IN TX FIFO for EP2 in Device mode
#define DevTxFifo3      (AT91_CAST(AT91_REG *) 	0x00000C00) // (DevTxFifo3) OTG IN TX FIFO for EP3 in Device mode
#define DevTxFifo4      (AT91_CAST(AT91_REG *) 	0x00001000) // (DevTxFifo4) OTG IN TX FIFO for EP4 in Device mode
#define DevTxFifo5      (AT91_CAST(AT91_REG *) 	0x00001400) // (DevTxFifo5) OTG IN TX FIFO for EP5 in Device mode
#define OutRxFifo       (AT91_CAST(AT91_REG *) 	0x00004000) // (OutRxFifo) OTG OUT RX FIFO. In Host mode, acts as a TX FIFO, in Device mode, acts as a RX FIFO
#define DevTxControl0   (AT91_CAST(AT91_REG *) 	0x00004400) // (DevTxControl0) IN EP0 TX Control Reg (Device mode)
#define DevTxStatus0    (AT91_CAST(AT91_REG *) 	0x00004404) // (DevTxStatus0) IN EP0 TX Status Reg (Device mode)
#define DevTxFifoSize0  (AT91_CAST(AT91_REG *) 	0x00004408) // (DevTxFifoSize0) IN EP0 TX FIFO Size Reg (Device mode)
#define DevTxCount0     (AT91_CAST(AT91_REG *) 	0x0000440C) // (DevTxCount0) IN EP0 TX Transfert Size Reg (Device mode)
#define DevTxControl1   (AT91_CAST(AT91_REG *) 	0x00004410) // (DevTxControl1) IN EP1 TX Control Reg (Device mode)
#define DevTxStatus1    (AT91_CAST(AT91_REG *) 	0x00004414) // (DevTxStatus1) IN EP1 TX Status Reg (Device mode)
#define DevTxFifoSize1  (AT91_CAST(AT91_REG *) 	0x00004418) // (DevTxFifoSize1) IN EP1 TX FIFO Size Reg (Device mode)
#define DevTxCount1     (AT91_CAST(AT91_REG *) 	0x0000441C) // (DevTxCount1) IN EP1 TX Transfert Size Reg (Device mode)
#define DevTxControl2   (AT91_CAST(AT91_REG *) 	0x00004420) // (DevTxControl2) IN EP2 TX Control Reg (Device mode)
#define DevTxStatus2    (AT91_CAST(AT91_REG *) 	0x00004424) // (DevTxStatus2) IN EP2 TX Status Reg (Device mode)
#define DevTxFifoSize2  (AT91_CAST(AT91_REG *) 	0x00004428) // (DevTxFifoSize2) IN EP2 TX FIFO Size Reg (Device mode)
#define DevTxCount2     (AT91_CAST(AT91_REG *) 	0x0000442C) // (DevTxCount2) IN EP2 TX Transfert Size Reg (Device mode)
#define DevTxControl3   (AT91_CAST(AT91_REG *) 	0x00004430) // (DevTxControl3) IN EP3 TX Control Reg (Device mode)
#define DevTxStatus3    (AT91_CAST(AT91_REG *) 	0x00004434) // (DevTxStatus3) IN EP3 TX Status Reg (Device mode)
#define DevTxFifoSize3  (AT91_CAST(AT91_REG *) 	0x00004438) // (DevTxFifoSize3) IN EP3 TX FIFO Size Reg (Device mode)
#define DevTxCount3     (AT91_CAST(AT91_REG *) 	0x0000443C) // (DevTxCount3) IN EP3 TX Transfert Size Reg (Device mode)
#define DevTxControl4   (AT91_CAST(AT91_REG *) 	0x00004440) // (DevTxControl4) IN EP4 TX Control Reg (Device mode)
#define DevTxStatus4    (AT91_CAST(AT91_REG *) 	0x00004444) // (DevTxStatus4) IN EP4 TX Status Reg (Device mode)
#define DevTxFifoSize4  (AT91_CAST(AT91_REG *) 	0x00004448) // (DevTxFifoSize4) IN EP4 TX FIFO Size Reg (Device mode)
#define DevTxCount4     (AT91_CAST(AT91_REG *) 	0x0000444C) // (DevTxCount4) IN EP4 TX Transfert Size Reg (Device mode)
#define DevTxControl5   (AT91_CAST(AT91_REG *) 	0x00004450) // (DevTxControl5) IN EP5 TX Control Reg (Device mode)
#define DevTxStatus5    (AT91_CAST(AT91_REG *) 	0x00004454) // (DevTxStatus5) IN EP5 TX Status Reg (Device mode)
#define DevTxFifoSize5  (AT91_CAST(AT91_REG *) 	0x00004458) // (DevTxFifoSize5) IN EP5 TX FIFO Size Reg (Device mode)
#define DevTxCount5     (AT91_CAST(AT91_REG *) 	0x0000445C) // (DevTxCount5) IN EP5 TX Transfert Size Reg (Device mode)
#define DevRxControl0   (AT91_CAST(AT91_REG *) 	0x00004500) // (DevRxControl0) OUT EP0 RX Control Reg (Device mode)
#define DevRxControl1   (AT91_CAST(AT91_REG *) 	0x00004510) // (DevRxControl1) OUT EP1 RX Control Reg (Device mode)
#define DevRxControl2   (AT91_CAST(AT91_REG *) 	0x00004520) // (DevRxControl2) OUT EP2 RX Control Reg (Device mode)
#define DevRxControl3   (AT91_CAST(AT91_REG *) 	0x00004530) // (DevRxControl3) OUT EP3 RX Control Reg (Device mode)
#define DevRxControl4   (AT91_CAST(AT91_REG *) 	0x00004540) // (DevRxControl4) OUT EP4 RX Control Reg (Device mode)
#define DevRxControl5   (AT91_CAST(AT91_REG *) 	0x00004550) // (DevRxControl5) OUT EP5 RX Control Reg (Device mode)
#define DevConfig       (AT91_CAST(AT91_REG *) 	0x00004600) // (DevConfig) Configure the device (Device mode)
#define DevStatus       (AT91_CAST(AT91_REG *) 	0x00004604) // (DevStatus) Reflects status information needed to service some interrupts (Device mode)
#define DevIntr         (AT91_CAST(AT91_REG *) 	0x00004608) // (DevIntr) Device Interrupt Register (Device mode)
#define DevIntrMask     (AT91_CAST(AT91_REG *) 	0x0000460C) // (DevIntrMask) Device Interrupt enable Register (Device mode)
#define DevRxFifoSize   (AT91_CAST(AT91_REG *) 	0x00004610) // (DevRxFifoSize) OUT EP RX FIFO Size Reg (Device mode)
#define DevEnpIntrMask  (AT91_CAST(AT91_REG *) 	0x00004614) // (DevEnpIntrMask) Global EP Interrupt Enable Reg (Device mode)
#define DevThreshold    (AT91_CAST(AT91_REG *) 	0x00004618) // (DevThreshold) Threshold Reg (Device mode)
#define DevRxStatus     (AT91_CAST(AT91_REG *) 	0x0000461C) // (DevRxStatus) OUT EP RX FIFO Status Reg (Device mode)
#define DevSetupStatus  (AT91_CAST(AT91_REG *) 	0x00004620) // (DevSetupStatus) Setup RX FIFO Status Reg (Device mode)
#define DevEnpIntr      (AT91_CAST(AT91_REG *) 	0x00004624) // (DevEnpIntr) Global EP Interrupt Reg (Device mode)
#define DevFrameNum     (AT91_CAST(AT91_REG *) 	0x00004628) // (DevFrameNum) Frame Number Reg (Device mode)
#define DevSetupDataLow (AT91_CAST(AT91_REG *) 	0x00004700) // (DevSetupDataLow) Setup Data 1st DWORD (Device mode)
#define DevSetupDataHigh (AT91_CAST(AT91_REG *) 	0x00004704) // (DevSetupDataHigh) Setup Data 1st DWORD (Device mode)
#define Biu             (AT91_CAST(AT91_REG *) 	0x00004708) // (Biu) Slave BIU Delay Count Reg (Device and Host modes)
#define TWI             (AT91_CAST(AT91_REG *) 	0x0000470C) // (TWI) *TWI Reg (Device and Host mode)
#define DevEpNe0        (AT91_CAST(AT91_REG *) 	0x00004804) // (DevEpNe0) EP0 NE Reg (Device mode)
#define DevEpNe1        (AT91_CAST(AT91_REG *) 	0x00004808) // (DevEpNe1) EP1 NE Reg (Device mode)
#define DevEpNe2        (AT91_CAST(AT91_REG *) 	0x0000480C) // (DevEpNe2) EP2 NE Reg (Device mode)
#define DevEpNe3        (AT91_CAST(AT91_REG *) 	0x00004810) // (DevEpNe3) EP3 NE Reg (Device mode)
#define DevEpNe4        (AT91_CAST(AT91_REG *) 	0x00004814) // (DevEpNe4) EP4 NE Reg (Device mode)
#define DevEpNe5        (AT91_CAST(AT91_REG *) 	0x00004818) // (DevEpNe5) EP5 NE Reg (Device mode)
#define HostIntr        (AT91_CAST(AT91_REG *) 	0x00004C00) // (HostIntr) Interrupt Reg (Host mode)
#define HostIntrMask    (AT91_CAST(AT91_REG *) 	0x00004C04) // (HostIntrMask) Interrupt Enable Reg (Host mode)
#define HostStatus      (AT91_CAST(AT91_REG *) 	0x00004C08) // (HostStatus) Status Reg (Host mode)
#define HostFifoControl (AT91_CAST(AT91_REG *) 	0x00004C0C) // (HostFifoControl) Host Control Reg (Host mode)
#define HostFifoSize    (AT91_CAST(AT91_REG *) 	0x00004C10) // (HostFifoSize) FIFO Size Reg (Host mode)
#define HostThreshold   (AT91_CAST(AT91_REG *) 	0x00004C14) // (HostThreshold) Threshold Reg (Host mode)
#define HostTxCount     (AT91_CAST(AT91_REG *) 	0x00004C18) // (HostTxCount) OUT Transfert Size Reg (Host mode)
#define HostFrameIntvl  (AT91_CAST(AT91_REG *) 	0x00005034) // (HostFrameIntvl) Frame Interval Reg (Host mode)
#define HostFrameRem    (AT91_CAST(AT91_REG *) 	0x00005038) // (HostFrameRem) Frame Remaining Reg (Host mode)
#define HostFrameNum    (AT91_CAST(AT91_REG *) 	0x0000503C) // (HostFrameNum) Frame Number Reg (Host mode)
#define HostRootHubPort0 (AT91_CAST(AT91_REG *) 	0x00005054) // (HostRootHubPort0) Port Status Change Control Reg (Host mode)
#define HostToken       (AT91_CAST(AT91_REG *) 	0x00005090) // (HostToken) Token Reg (Host mode)
#define CtrlStatus      (AT91_CAST(AT91_REG *) 	0x00005094) // (CtrlStatus) Control and Status Reg (Device and Host mode)

#endif
// -------- OTG_DEV_TX_CONTROL : (OTG Offset: 0x4400) IN EP TX Control Reg (Device mode) -------- 
#define AT91C_TX_SEND_STALL   (0x1 <<  0) // (OTG) RW USB host requests are stalled
#define AT91C_SEND_NACK       (0x1 <<  1) // (OTG) RO USB host requests met with a NAK response
#define AT91C_TX_FLUSH_FIFO   (0x1 <<  2) // (OTG) RW IN Tx FIFO is flushed
#define AT91C_TX_FIFO_READY   (0x1 <<  3) // (OTG) RW IN Tx FIFO is ready for data transfert
// -------- OTG_DEV_TX_STATUS : (OTG Offset: 0x4404) IN EP TX Status Reg (Device mode) -------- 
#define AT91C_TX_STATUS       (0x1 <<  0) // (OTG) RO Status for the curent transfer
#define AT91C_DATA_SENT       (0x1 <<  1) // (OTG) RW An IN tkoen is received
#define AT91C_BELOW_THRESHOLD (0x1 <<  2) // (OTG) RO Indicates that the amount of data (DWORDs) in the IN Tx FIFO is below threshold level
#define AT91C_NAK_SENT        (0x1 <<  3) // (OTG) RW IN token is received by this endpoint and a NAK response is sent
#define AT91C_DATA_UNDERRUN_ERROR (0x1 <<  4) // (OTG) RO underrun error occurred while transmitting data
#define AT91C_ISO_TX_DONE     (0x1 <<  5) // (OTG) RW TX FIFO has been filled
// -------- OTG_DEV_TX_FIFOSIZE : (OTG Offset: 0x4408) IN EP TX FIFO Size Reg (Device mode) -------- 
#define AT91C_DEV_TX_FIFO_SIZE (0x3FF <<  0) // (OTG) RW stores the value of the IN Tx FIFO size
// -------- OTG_DEV_TX_COUNT : (OTG Offset: 0x440c) IN EP TX Transfert Size Reg (Device mode) -------- 
#define AT91C_TX_TRANSFERT_SIZE (0x3FF <<  0) // (OTG) RW number of bytes expected
// -------- OTG_DEV_TX_CONTROL : (OTG Offset: 0x4410) IN EP TX Control Reg (Device mode) -------- 
// -------- OTG_DEV_TX_STATUS : (OTG Offset: 0x4414) IN EP TX Status Reg (Device mode) -------- 
// -------- OTG_DEV_TX_FIFOSIZE : (OTG Offset: 0x4418) IN EP TX FIFO Size Reg (Device mode) -------- 
// -------- OTG_DEV_TX_COUNT : (OTG Offset: 0x441c) IN EP TX Transfert Size Reg (Device mode) -------- 
// -------- OTG_DEV_TX_CONTROL : (OTG Offset: 0x4420) IN EP TX Control Reg (Device mode) -------- 
// -------- OTG_DEV_TX_STATUS : (OTG Offset: 0x4424) IN EP TX Status Reg (Device mode) -------- 
// -------- OTG_DEV_TX_FIFOSIZE : (OTG Offset: 0x4428) IN EP TX FIFO Size Reg (Device mode) -------- 
// -------- OTG_DEV_TX_COUNT : (OTG Offset: 0x442c) IN EP TX Transfert Size Reg (Device mode) -------- 
// -------- OTG_DEV_TX_CONTROL : (OTG Offset: 0x4430) IN EP TX Control Reg (Device mode) -------- 
// -------- OTG_DEV_TX_STATUS : (OTG Offset: 0x4434) IN EP TX Status Reg (Device mode) -------- 
// -------- OTG_DEV_TX_FIFOSIZE : (OTG Offset: 0x4438) IN EP TX FIFO Size Reg (Device mode) -------- 
// -------- OTG_DEV_TX_COUNT : (OTG Offset: 0x443c) IN EP TX Transfert Size Reg (Device mode) -------- 
// -------- OTG_DEV_TX_CONTROL : (OTG Offset: 0x4440) IN EP TX Control Reg (Device mode) -------- 
// -------- OTG_DEV_TX_STATUS : (OTG Offset: 0x4444) IN EP TX Status Reg (Device mode) -------- 
// -------- OTG_DEV_TX_FIFOSIZE : (OTG Offset: 0x4448) IN EP TX FIFO Size Reg (Device mode) -------- 
// -------- OTG_DEV_TX_COUNT : (OTG Offset: 0x444c) IN EP TX Transfert Size Reg (Device mode) -------- 
// -------- OTG_DEV_TX_CONTROL : (OTG Offset: 0x4450) IN EP TX Control Reg (Device mode) -------- 
// -------- OTG_DEV_TX_STATUS : (OTG Offset: 0x4454) IN EP TX Status Reg (Device mode) -------- 
// -------- OTG_DEV_TX_FIFOSIZE : (OTG Offset: 0x4458) IN EP TX FIFO Size Reg (Device mode) -------- 
// -------- OTG_DEV_TX_COUNT : (OTG Offset: 0x445c) IN EP TX Transfert Size Reg (Device mode) -------- 
// -------- OTG_DEV_RX_CONTROL : (OTG Offset: 0x4500) OUT EP RX Control Reg (Device mode) -------- 
#define AT91C_RX_SEND_STALL   (0x1 <<  0) // (OTG) RW Any USB Host request will be stalled for the corresponding EP
#define AT91C_RX_FLUSH_FIFO   (0x1 <<  2) // (OTG) RW flush the OUT Rx FIFO
#define AT91C_RX_FIFO_READY   (0x1 <<  3) // (OTG) RW OUT Rx FIFO ready for data transfer
// -------- OTG_DEV_RX_CONTROL : (OTG Offset: 0x4510) OUT EP RX Control Reg (Device mode) -------- 
// -------- OTG_DEV_RX_CONTROL : (OTG Offset: 0x4520) OUT EP RX Control Reg (Device mode) -------- 
// -------- OTG_DEV_RX_CONTROL : (OTG Offset: 0x4530) OUT EP RX Control Reg (Device mode) -------- 
// -------- OTG_DEV_RX_CONTROL : (OTG Offset: 0x4540) OUT EP RX Control Reg (Device mode) -------- 
// -------- OTG_DEV_RX_CONTROL : (OTG Offset: 0x4550) OUT EP RX Control Reg (Device mode) -------- 
// -------- OTG_DEV_CONFIG : (OTG Offset: 0x4600) Device Config Reg (Device mode) -------- 
#define AT91C_SPEED           (0x3 <<  0) // (OTG) RW Speed supported by the device
#define 	AT91C_SPEED_LS                   (0x2) // (OTG) Low-Speed (LS)
#define 	AT91C_SPEED_FS                   (0x3) // (OTG) Full-Speed (FS)
#define AT91C_REMOTE_WAKEUP   (0x1 <<  2) // (OTG) RW Remote Wakeup capable
#define AT91C_SELF_POWERED    (0x1 <<  3) // (OTG) RW Device is self powered
#define AT91C_SYNC_FRAME      (0x1 <<  4) // (OTG) RW Device support the Sync Frame
#define AT91C_CSR_PRG_SUP     (0x1 <<  5) // (OTG) RW CSR programming supported
#define AT91C_CSR_DONE        (0x1 <<  6) // (OTG) RW CSR programming completed
#define AT91C_SET_DESC_SUP    (0x1 <<  7) // (OTG) RW Device support Set descriptor commands
#define AT91C_HST_MODE        (0x1 <<  8) // (OTG) RW FS OTG Subsystem is in Host mode or Devide mode
#define 	AT91C_HST_MODE_HOST                 (0x0 <<  8) // (OTG) FS OTG Subsystem is in Host mode
#define 	AT91C_HST_MODE_DEVICE               (0x1 <<  8) // (OTG) FS OTG Subsystem is in Device mode
#define AT91C_SCALE_DOWN      (0x1 <<  9) // (OTG) RW In simulation for scale down the simulation time
#define AT91C_SOFT_DISCONNECT (0x1 << 10) // (OTG) RW Indicates to FS OTG Subsystem (when in device mode) to pull-up DP line
#define AT91C_STATUS          (0x1 << 11) // (OTG) RW Options for the FS OTG Subsystem
#define AT91C_STATUS_1        (0x1 << 12) // (OTG) RW Options for the FS OTG Subsystem
// -------- OTG_DEV_STATUS : (OTG Offset: 0x4604) Device Status Reg (Device mode) -------- 
#define AT91C_CFG             (0xF <<  0) // (OTG) RO Configuration Set
#define AT91C_INTF            (0xF <<  4) // (OTG) RO Interface Set
#define AT91C_ALT             (0xF <<  8) // (OTG) RO Alternate Set
#define AT91C_SUSP            (0x1 << 12) // (OTG) RO Suspend status
#define AT91C_TS              (0x7FF << 21) // (OTG) RO Frame number
// -------- OTG_DEV_INTR : (OTG Offset: 0x4608) Device Interrupt Reg (Device mode) -------- 
#define AT91C_SC_INT          (0x1 <<  0) // (OTG) RW Set Configuration command
#define AT91C_SI_INT          (0x1 <<  1) // (OTG) RW Set interface command
#define AT91C_UR_INT          (0x1 <<  3) // (OTG) RW Reset is detected
#define AT91C_US_INT          (0x1 <<  4) // (OTG) RW Suspend is detected
#define AT91C_SOF_INT         (0x1 <<  5) // (OTG) RW SOF token is detected
#define AT91C_SETUP_RECEIVED  (0x1 <<  6) // (OTG) RO SETUP transfert is received
#define AT91C_OUT_RECEIVED    (0x1 <<  7) // (OTG) RO OUT transfert is received
#define AT91C_PORT_INT        (0x1 <<  8) // (OTG) RW change in port status
#define AT91C_OTG_INT         (0x1 <<  9) // (OTG) RW SRP or HNP occured
#define AT91C_DEV_TWI_INT     (0x1 << 10) // (OTG) RW TWI command is completed
// -------- OTG_DEV_INTR_MASK : (OTG Offset: 0x460c) Device Interrupt Enable Reg (Device mode) -------- 
#define AT91C_SC_INT_ENABLE   (0x1 <<  0) // (OTG) RW Interrupt Enable register for device receipt of a Set Configuration command
#define AT91C_SI_INT_ENABLE   (0x1 <<  1) // (OTG) RW Interrupt Enable register for device receipt of a Set Interface command
#define AT91C_UR_INT_ENABLE   (0x1 <<  3) // (OTG) RW Interrupt Enable register for USB Reset
#define AT91C_US_INT_ENABLE   (0x1 <<  4) // (OTG) RW Interrupt Enable register for USB Suspend
#define AT91C_SOF_INT_ENABLE  (0x1 <<  5) // (OTG) RW Interrupt Enable register for SOF
#define AT91C_SETUP_INT_ENABLE (0x1 <<  6) // (OTG) RW Interrupt Enable register for received SETUP transfers
#define AT91C_OUT_RX_FIFO_ENABLE (0x1 <<  7) // (OTG) RW Interrupt Enable register when an OUT transfer is received from the USB host
#define AT91C_PORT_INT_ENABLE (0x1 <<  8) // (OTG) RW Interrupt Enable register for a change in port status
#define AT91C_OTG_INT_ENABLE  (0x1 <<  9) // (OTG) RW Interrupt Enable register for FS OTG protocol events (SRP, HNP) interrupt
#define AT91C_TWI_INT_ENABLE  (0x1 << 10) // (OTG) RW Interrupt Enable register for TWI events
// -------- OTG_DEV_RX_FIFOSIZE : (OTG Offset: 0x4610) OUT endpoint Rx FIFO size register (Device mode) -------- 
#define AT91C_DEV_RX_FIFO_SIZE (0x3FF <<  0) // (OTG) RW OUT Rx FIFO size
// -------- OTG_DEV_ENP_INTR_MASK : (OTG Offset: 0x4614) Global endpoint interrupt enable register (Device mode) -------- 
#define AT91C_IN_EP_INT_ENABLE (0xFFFF <<  0) // (OTG) RW IN endpoint interrupt enable register
#define AT91C_OUT_EP_INT_ENABLE (0xFFFF << 16) // (OTG) RW OUT endpoint interrupt enable register
// -------- OTG_DEV_THRESHOLD : (OTG Offset: 0x4618) Threshold Register (Device Mode) -------- 
#define AT91C_TX_THRESHOLD    (0x3FF <<  0) // (OTG) RW IN endpoint threshold value
#define AT91C_RX_THRESHOLD    (0x3FF << 16) // (OTG) RW OUT endpoint threshold value
// -------- OTG_DEV_RX_STATUS : (OTG Offset: 0x461c) OUT endpoint Rx FIFO status register (Device mode) -------- 
#define AT91C_RX_STATUS       (0x1 <<  0) // (OTG) RO Status write information from the FS OTG Subsystem.
#define AT91C_RX_STATUS_COMPLETE (0x1 <<  1) // (OTG) RW Last data of the transaction is received in the OUT Rx FIFO or the transfer is completed and the status update is completed
#define AT91C_ABOVE_THRESHOLD (0x1 <<  2) // (OTG) RO Number of bytes in the OUT Rx FIFO is above the threshold level.
#define AT91C_DATA_OVERRUN_ERROR (0x1 <<  4) // (OTG) RO Data overrun error has occurred
#define AT91C_RX_ENDPOINT_NUMBER (0xF << 16) // (OTG) RO Indicates which endpoint has received the data.
#define AT91C_RX_TRANSFERT_SIZE (0x3FF << 22) // (OTG) RO number of bytes received from FS OTG Subsystem.
// -------- OTG_DEV_SETUP_STATUS : (OTG Offset: 0x4620) Setup Rx FIFO Status Register -------- 
#define AT91C_SETUP_STATUS    (0x1 <<  0) // (OTG) RO Status write information
#define AT91C_SETUP_STATUS_COMPLETE (0x1 <<  1) // (OTG) RW Last data of the transaction is received
#define AT91C_SETUP_AFTER_OUT (0x1 << 15) // (OTG) RO data in the Setup Rx FIFO is received after the data in OUT Rx FIFO
#define AT91C_SETUP_ENDPOINT_NUMBER (0xF << 16) // (OTG) RO Indicates which endpoint has received the data.
// -------- OTG_DEV_ENP_INTR : (OTG Offset: 0x4624) Global endpoint interrupt register (Device mode) -------- 
#define AT91C_IN_EP_INT       (0xFFFF <<  0) // (OTG) RO event in the IN Endpoint
#define AT91C_OUT_EP_INT      (0xFFFF << 16) // (OTG) RO event in the OUT Endpoint
// -------- OTG_DEV_FRAME_NUM : (OTG Offset: 0x4628) Frame Number register (Device mode) -------- 
#define AT91C_FRAME_NUMBER    (0x7FF <<  0) // (OTG) RW Set the frame number for isochronous transfer
// -------- OTG_DEV_SETUP_DATA_LOW : (OTG Offset: 0x4700) setup data, first DWORD -------- 
#define AT91C_FIRST_SETUP_DATA (0x0 <<  0) // (OTG) RO Stores the first 4 bytes of SETUP data.
// -------- OTG_DEV_SETUP_DATA_HIGH : (OTG Offset: 0x4704) Setup data, second DWORD -------- 
#define AT91C_SECOND_SETUP_DATA (0x0 <<  0) // (OTG) RO Stores the second 4 bytes of SETUP data.
// -------- OTG_DEV_BIU : (OTG Offset: 0x4708) Slave BIU delay count register (Device and Host mode) -------- 
#define AT91C_DELAY_COUNT     (0x3 <<  0) // (OTG) RW Control the initial wait state
// -------- OTG_TWI : (OTG Offset: 0x470c) TWI register -------- 
#define AT91C_TWI_WRITE_READ_DATA (0xFF <<  0) // (OTG) RW Holds the read data byte
#define AT91C_TWI_DATA2       (0xFF <<  8) // (OTG) RW field is reserved
#define AT91C_TWI_ADDRESS     (0x1F << 16) // (OTG) RW seven-bit TWI device address
#define AT91C_NEW_REGISTER_ADDRESS (0x1 << 28) // (OTG) RW TWI device’s register address and first data byte
#define AT91C_B2V             (0x1 << 29) // (OTG) RW Byte Two Valid
#define AT91C_READ_WRITE_INDICATOR (0x1 << 30) // (OTG) RW Read Write indicator
#define AT91C_TWI_BUSY_DONE_INDICATOR (0x1 << 31) // (OTG) RW TWI register transfer requests
// -------- OTG_DEV_EP_NE : (OTG Offset: 0x4804) Endpoint NE register -------- 
#define AT91C_NE_ENDPOINT_NUMBER (0xF <<  0) // (OTG) RW Endpoint Number
#define AT91C_ENDPOINT_DIR    (0x1 <<  4) // (OTG) RW Endpoint Direction
#define 	AT91C_ENDPOINT_DIR_OUT                  (0x0 <<  4) // (OTG) Endpoint direction OUT
#define 	AT91C_ENDPOINT_DIR_IN                   (0x1 <<  4) // (OTG) Endpoint direction IN
#define AT91C_ENDPOINT_TYPE   (0x3 <<  5) // (OTG) RW Endpoint Type
#define 	AT91C_ENDPOINT_TYPE_CTRL                 (0x0 <<  5) // (OTG) Endpoint type Control
#define 	AT91C_ENDPOINT_TYPE_ISO                  (0x1 <<  5) // (OTG) Endpoint type Isochronous
#define 	AT91C_ENDPOINT_TYPE_BULK                 (0x2 <<  5) // (OTG) Endpoint type Bulk
#define 	AT91C_ENDPOINT_TYPE_INT                  (0x3 <<  5) // (OTG) Endpoint type Interrupt
#define AT91C_CONFIG_NUM      (0xF <<  7) // (OTG) RW Configuration number to which this endpoint belongs
#define AT91C_INTERFACE_NUM   (0xF << 11) // (OTG) RW Interface number to which this endpoint belongs
#define AT91C_ALTERNATE_NUM   (0xF << 15) // (OTG) RW Alternate setting to which this endpoint belongs
#define AT91C_MAX_PACKET_SIZE (0x3FF << 19) // (OTG) RW Maximum packet size
// -------- OTG_DEV_EP_NE : (OTG Offset: 0x4808) Endpoint NE register -------- 
// -------- OTG_DEV_EP_NE : (OTG Offset: 0x480c) Endpoint NE register -------- 
// -------- OTG_DEV_EP_NE : (OTG Offset: 0x4810) Endpoint NE register -------- 
// -------- OTG_DEV_EP_NE : (OTG Offset: 0x4814) Endpoint NE register -------- 
// -------- OTG_DEV_EP_NE : (OTG Offset: 0x4818) Endpoint NE register -------- 
// -------- OTG_HOST_INTR : (OTG Offset: 0x4c00) Interrupt register (Host mode) -------- 
#define AT91C_STATUS_INT      (0x1 <<  0) // (OTG) RW receives a status write
#define AT91C_ABOVE_THRESHOLD_INT (0x1 <<  1) // (OTG) RO bytes in the IN Rx FIFO exceeds the threshold
#define AT91C_BELOW_THRESHOLD_INT (0x1 <<  2) // (OTG) RO bytes in the OUT Tx FIFO is less than the threshold level
#define AT91C_SOF_DUE         (0x1 <<  3) // (OTG) RW SOF token has been transmitted
#define AT91C_HOST_PORT_INT   (0x1 <<  8) // (OTG) RW change in port status
#define AT91C_HOST_OTG_INT    (0x1 <<  9) // (OTG) RW FS OTG protocol event (SRP or HNP)
#define AT91C_HOST_TWI_INT    (0x1 << 10) // (OTG) RW TWI command is completed
// -------- OTG_HOST_INTR_MASK : (OTG Offset: 0x4c04) Interrupt Enable Register (Host Mode) -------- 
#define AT91C_STATUS_INT_ENABLE (0x1 <<  0) // (OTG) RW Interrupt Enable register for status interrupt.
#define AT91C_ABOVE_THRESHOLD_INT_ENABLE (0x1 <<  1) // (OTG) RW Interrupt Enable register for above_threshold interrupt.
#define AT91C_BELOW_THRESHOLD_INT_ENABLE (0x1 <<  2) // (OTG) RW Interrupt Enable register for below_threshold interrupt.
#define AT91C_SOF_DUE_ENABLE  (0x1 <<  3) // (OTG) RW Interrupt Enable register for SOF interrupt.
#define AT91C_HOST_PORT_INT_ENABLE (0x1 <<  8) // (OTG) RW Interrupt Enable register for port change status interrupts.
#define AT91C_HOST_OTG_INT_ENABLE (0x1 <<  9) // (OTG) RW Interrupt Enable register for FS OTG protocol event (SRP, HNP) interrupts.
#define AT91C_HOST_TWI_INT_ENABLE (0x1 << 10) // (OTG) RW Interrupt Enable register for TWI interrupt.
// -------- OTG_HOST_STATUS : (OTG Offset: 0x4c08) Status register (Host mode) -------- 
#define AT91C_RESPONSE_CODE   (0xF <<  0) // (OTG) RO Response Code
#define 	AT91C_RESPONSE_CODE_ACK_SUCCESSFUL_TRANSFERT (0x0) // (OTG) 
#define 	AT91C_RESPONSE_CODE_CRC_ERROR            (0x1) // (OTG) 
#define 	AT91C_RESPONSE_CODE_BIT_STUFF_ERROR      (0x2) // (OTG) 
#define 	AT91C_RESPONSE_CODE_DATA_TOGGLE_ERROR    (0x3) // (OTG) 
#define 	AT91C_RESPONSE_CODE_STALL                (0x4) // (OTG) 
#define 	AT91C_RESPONSE_CODE_TIME_OUT             (0x5) // (OTG) 
#define 	AT91C_RESPONSE_CODE_PID_CHECK_FAILED     (0x6) // (OTG) 
#define 	AT91C_RESPONSE_CODE_UNEXPECTED_PID       (0x7) // (OTG) 
#define 	AT91C_RESPONSE_CODE_DATA_OVERRUN         (0x8) // (OTG) 
#define 	AT91C_RESPONSE_CODE_DATA_UNDERRUN        (0x9) // (OTG) 
#define 	AT91C_RESPONSE_CODE_NAK                  (0xA) // (OTG) 
#define 	AT91C_RESPONSE_CODE_FRAME_OVERRUN        (0xB) // (OTG) 
#define 	AT91C_RESPONSE_CODE_BUFFER_OVERRUN       (0xC) // (OTG) 
#define 	AT91C_RESPONSE_CODE_BUFFER_UNDERRUN      (0xD) // (OTG) 
#define AT91C_HOST_TRANSFERT_SIZE (0x3FF <<  4) // (OTG) RO
// -------- OTG_HOST_FIFO_CONTROL : (OTG Offset: 0x4c0c) Host control register (Host mode) -------- 
#define AT91C_HOST_FLUSH_FIFO (0x1 <<  0) // (OTG) RW Flushes the FIFO
#define AT91C_HOST_SCALE_DOWN (0x1 <<  9) // (OTG) RW Scale down the simulation time
// -------- OTG_HOST_FIFOSIZE : (OTG Offset: 0x4c10) FIFO Size Register (Host mode) -------- 
#define AT91C_HOST_RX_FIFO_SIZE (0x3FF <<  0) // (OTG) RW Tx FIFO size
#define AT91C_HOST_TX_FIFO_SIZE (0x3FF << 16) // (OTG) RW Rx FIFO size
// -------- OTG_HOST_THRESHOLD : (OTG Offset: 0x4c14) Threshold Register (Host Mode) -------- 
// -------- OTG_HOST_TX_COUNT : (OTG Offset: 0x4c18) OUT transfer size register (Host mode) -------- 
#define AT91C_TRANSFERT_SIZE  (0x3FF <<  0) // (OTG) RW number of bytes to transfer
// -------- OTG_HOST_FRAME_INTVL : (OTG Offset: 0x5034) Frame interval register (Host mode) -------- 
#define AT91C_FRAME_INTERVAL  (0x3FFF <<  0) // (OTG) RW Frame interval
// -------- OTG_HOST_FRAME_REM : (OTG Offset: 0x5038) Frame remaining register (Host mode) -------- 
#define AT91C_FRAME_REMAINING (0x3FFF <<  0) // (OTG) RO Frame remaining
// -------- OTG_HOST_FRAME_NUM : (OTG Offset: 0x503c)  -------- 
// -------- OTG_HOST_ROOT_HUB_PORT_0 : (OTG Offset: 0x5054) Port Status Change Control Register (Host Mode) -------- 
#define AT91C_CONNECT_STATUS_CLEAR_PORT (0x1 <<  0) // (OTG) RW Current Connect Status/Clear Port Enable
#define AT91C_PORT_ENABLE     (0x1 <<  1) // (OTG) RW port is enabled or disabled
#define AT91C_PORT_SUSPEND    (0x1 <<  2) // (OTG) RW Port Suspend Status/Set Port Suspend
#define AT91C_PORT_OVERCURR   (0x1 <<  3) // (OTG) RW Port Overcurrent Indicator/Clear Suspend Status
#define AT91C_PORT_RESET      (0x1 <<  4) // (OTG) RW Port Reset Status/Set Port Reset
#define AT91C_PORT_POWER      (0x1 <<  8) // (OTG) RW 
#define AT91C_LS_DEV_ATTACHED_CLEAR_PORT_POWER (0x1 <<  9) // (OTG) RW Low-Speed Device Attached/Clear Port Power
#define AT91C_CONNECT_STATUS_CHANGE (0x1 << 16) // (OTG) RW Connect Status Change/Clear Connect Status Change
#define AT91C_PORT_ENABLE_CHANGE (0x1 << 17) // (OTG) RW Port Enable Status Change/Clear Port Enable Status Change
#define AT91C_PORT_SUSPEND_CHANGE (0x1 << 18) // (OTG) RW Port Suspend Status Change/Clear Port Suspend Status Change
#define AT91C_PORT_OVERCURR_CHANGE (0x1 << 19) // (OTG) RW Port Overcurrent Indicator Change/Clear Port Overcurrent Indicator Change
#define AT91C_PORT_RESET_CHANGE (0x1 << 20) // (OTG) RW Port Overcurrent Indicator Change/Clear Port Overcurrent Indicator Change
// -------- OTG_HOST_TOKEN : (OTG Offset: 0x5090) Token register (Host mode) -------- 
#define AT91C_TOKEN_ADDRESS   (0x7F <<  0) // (OTG) RW Address field for the current token
#define AT91C_TOKEN_EP_NUM    (0xF <<  7) // (OTG) RW Endpoint number field for the current token
#define AT91C_TOKEN_DATA_TOGGLE (0x3 << 11) // (OTG) RW Data toggle for the current OUT data packet
#define 	AT91C_TOKEN_DATA_TOGGLE_DATA0                (0x0 << 11) // (OTG) 00: results in DATA0 PID
#define 	AT91C_TOKEN_DATA_TOGGLE_DATA1                (0x1 << 11) // (OTG) 01: results in DATA1 PID
#define AT91C_TOKEN_TYPE      (0xF << 13) // (OTG) RW Token Type
#define 	AT91C_TOKEN_TYPE_OUT                  (0x1 << 13) // (OTG) 0001: results in OUT token
#define 	AT91C_TOKEN_TYPE_IN                   (0x9 << 13) // (OTG) 1001: results in IN token
#define 	AT91C_TOKEN_TYPE_SETUP                (0xD << 13) // (OTG) 1101: results in SETUP token
#define AT91C_TOKEN_ISO_TRANSFERT (0x1 << 17) // (OTG) RW ISO transfer
#define AT91C_TOKEN_TRANSFERT_SPEED (0x3 << 18) // (OTG) RW Transfer speed
#define 	AT91C_TOKEN_TRANSFERT_SPEED_LS                   (0x2 << 18) // (OTG) 10: Low  Speed transfer (1.5Mbps)
#define 	AT91C_TOKEN_TRANSFERT_SPEED_FS                   (0x3 << 18) // (OTG) 11: Full Speed transfer (12Mbps)
#define AT91C_TOKEN_TRANSFERT_SIZE (0x3FF << 20) // (OTG) RW Transfer Size
// -------- OTG_CTRL_STATUS : (OTG Offset: 0x5094) FS OTG Control and Status Register (Device and Host Modes) -------- 
#define AT91C_SESSION_REQ_SUCCESS (0x1 <<  0) // (OTG) RO Session Request Success
#define AT91C_SESSION_REQ_STATUS_CHANGE (0x1 <<  1) // (OTG) RW Session Request Status Change
#define AT91C_HOST_NEG_SUCCESS (0x1 <<  2) // (OTG) RO Host Negotiation Success
#define AT91C_HOST_NEG_STATUS_CHANGE (0x1 <<  3) // (OTG) RW Host Negotiation Success Status Change
#define AT91C_SESSION_REQ_DETECTED (0x1 <<  4) // (OTG) RO Session Request Detected
#define AT91C_SESSION_REQ_DETECT_STATUS_CHANGE (0x1 <<  5) // (OTG) RW Session Request Detected Status Change
#define AT91C_HOST_NEG_DETECTED (0x1 <<  6) // (OTG) RO Host Negotiation Detected
#define AT91C_HOST_NEG_DETECT_STATUS_CHANGE (0x1 <<  7) // (OTG) RW Host Negotiation Detect Status Change
#define AT91C_CONNECTOR_ID    (0x1 <<  8) // (OTG) RO Connector ID Status
#define AT91C_CONNECTOR_ID_CHANGE (0x1 <<  9) // (OTG) RW Connector ID Status Change
#define AT91C_CURRENT_HOST_MODE (0x1 << 10) // (OTG) RO Current Host Mode
#define AT91C_SESSION_REQ     (0x1 << 16) // (OTG) RW Session Request
#define AT91C_HNP_REQ         (0x1 << 17) // (OTG) RW HNP Request
#define AT91C_HOST_SET_HNP_ENABLE (0x1 << 18) // (OTG) RW Host Set HNP Enable
#define AT91C_HNP_ENABLE      (0x1 << 19) // (OTG) RW HNP Enabled
#define AT91C_SRP_CAPABLE     (0x1 << 20) // (OTG) RW SRP Capable
#define AT91C_HNP_CAPABLE     (0x1 << 21) // (OTG) RW HNP Capable

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR UDPHS Enpoint FIFO data register
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_UDPHS_EPTFIFO {
	AT91_REG	 UDPHS_READEPT0[16384]; 	// FIFO Endpoint Data Register 0
	AT91_REG	 UDPHS_READEPT1[16384]; 	// FIFO Endpoint Data Register 1
	AT91_REG	 UDPHS_READEPT2[16384]; 	// FIFO Endpoint Data Register 2
	AT91_REG	 UDPHS_READEPT3[16384]; 	// FIFO Endpoint Data Register 3
	AT91_REG	 UDPHS_READEPT4[16384]; 	// FIFO Endpoint Data Register 4
	AT91_REG	 UDPHS_READEPT5[16384]; 	// FIFO Endpoint Data Register 5
	AT91_REG	 UDPHS_READEPT6[16384]; 	// FIFO Endpoint Data Register 6
	AT91_REG	 UDPHS_READEPT7[16384]; 	// FIFO Endpoint Data Register 7
	AT91_REG	 UDPHS_READEPT8[16384]; 	// FIFO Endpoint Data Register 8
	AT91_REG	 UDPHS_READEPT9[16384]; 	// FIFO Endpoint Data Register 9
	AT91_REG	 UDPHS_READEPTA[16384]; 	// FIFO Endpoint Data Register 10
	AT91_REG	 UDPHS_READEPTB[16384]; 	// FIFO Endpoint Data Register 11
	AT91_REG	 UDPHS_READEPTC[16384]; 	// FIFO Endpoint Data Register 12
	AT91_REG	 UDPHS_READEPTD[16384]; 	// FIFO Endpoint Data Register 13
	AT91_REG	 UDPHS_READEPTE[16384]; 	// FIFO Endpoint Data Register 14
	AT91_REG	 UDPHS_READEPTF[16384]; 	// FIFO Endpoint Data Register 15
} AT91S_UDPHS_EPTFIFO, *AT91PS_UDPHS_EPTFIFO;
#else
#define UDPHS_READEPT0  (AT91_CAST(AT91_REG *) 	0x00000000) // (UDPHS_READEPT0) FIFO Endpoint Data Register 0
#define UDPHS_READEPT1  (AT91_CAST(AT91_REG *) 	0x00010000) // (UDPHS_READEPT1) FIFO Endpoint Data Register 1
#define UDPHS_READEPT2  (AT91_CAST(AT91_REG *) 	0x00020000) // (UDPHS_READEPT2) FIFO Endpoint Data Register 2
#define UDPHS_READEPT3  (AT91_CAST(AT91_REG *) 	0x00030000) // (UDPHS_READEPT3) FIFO Endpoint Data Register 3
#define UDPHS_READEPT4  (AT91_CAST(AT91_REG *) 	0x00040000) // (UDPHS_READEPT4) FIFO Endpoint Data Register 4
#define UDPHS_READEPT5  (AT91_CAST(AT91_REG *) 	0x00050000) // (UDPHS_READEPT5) FIFO Endpoint Data Register 5
#define UDPHS_READEPT6  (AT91_CAST(AT91_REG *) 	0x00060000) // (UDPHS_READEPT6) FIFO Endpoint Data Register 6
#define UDPHS_READEPT7  (AT91_CAST(AT91_REG *) 	0x00070000) // (UDPHS_READEPT7) FIFO Endpoint Data Register 7
#define UDPHS_READEPT8  (AT91_CAST(AT91_REG *) 	0x00080000) // (UDPHS_READEPT8) FIFO Endpoint Data Register 8
#define UDPHS_READEPT9  (AT91_CAST(AT91_REG *) 	0x00090000) // (UDPHS_READEPT9) FIFO Endpoint Data Register 9
#define UDPHS_READEPTA  (AT91_CAST(AT91_REG *) 	0x000A0000) // (UDPHS_READEPTA) FIFO Endpoint Data Register 10
#define UDPHS_READEPTB  (AT91_CAST(AT91_REG *) 	0x000B0000) // (UDPHS_READEPTB) FIFO Endpoint Data Register 11
#define UDPHS_READEPTC  (AT91_CAST(AT91_REG *) 	0x000C0000) // (UDPHS_READEPTC) FIFO Endpoint Data Register 12
#define UDPHS_READEPTD  (AT91_CAST(AT91_REG *) 	0x000D0000) // (UDPHS_READEPTD) FIFO Endpoint Data Register 13
#define UDPHS_READEPTE  (AT91_CAST(AT91_REG *) 	0x000E0000) // (UDPHS_READEPTE) FIFO Endpoint Data Register 14
#define UDPHS_READEPTF  (AT91_CAST(AT91_REG *) 	0x000F0000) // (UDPHS_READEPTF) FIFO Endpoint Data Register 15

#endif

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR UDPHS Endpoint struct
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_UDPHS_EPT {
	AT91_REG	 UDPHS_EPTCFG; 	// UDPHS Endpoint Config Register
	AT91_REG	 UDPHS_EPTCTLENB; 	// UDPHS Endpoint Control Enable Register
	AT91_REG	 UDPHS_EPTCTLDIS; 	// UDPHS Endpoint Control Disable Register
	AT91_REG	 UDPHS_EPTCTL; 	// UDPHS Endpoint Control Register
	AT91_REG	 Reserved0[1]; 	// 
	AT91_REG	 UDPHS_EPTSETSTA; 	// UDPHS Endpoint Set Status Register
	AT91_REG	 UDPHS_EPTCLRSTA; 	// UDPHS Endpoint Clear Status Register
	AT91_REG	 UDPHS_EPTSTA; 	// UDPHS Endpoint Status Register
} AT91S_UDPHS_EPT, *AT91PS_UDPHS_EPT;
#else
#define UDPHS_EPTCFG    (AT91_CAST(AT91_REG *) 	0x00000000) // (UDPHS_EPTCFG) UDPHS Endpoint Config Register
#define UDPHS_EPTCTLENB (AT91_CAST(AT91_REG *) 	0x00000004) // (UDPHS_EPTCTLENB) UDPHS Endpoint Control Enable Register
#define UDPHS_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0x00000008) // (UDPHS_EPTCTLDIS) UDPHS Endpoint Control Disable Register
#define UDPHS_EPTCTL    (AT91_CAST(AT91_REG *) 	0x0000000C) // (UDPHS_EPTCTL) UDPHS Endpoint Control Register
#define UDPHS_EPTSETSTA (AT91_CAST(AT91_REG *) 	0x00000014) // (UDPHS_EPTSETSTA) UDPHS Endpoint Set Status Register
#define UDPHS_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0x00000018) // (UDPHS_EPTCLRSTA) UDPHS Endpoint Clear Status Register
#define UDPHS_EPTSTA    (AT91_CAST(AT91_REG *) 	0x0000001C) // (UDPHS_EPTSTA) UDPHS Endpoint Status Register

#endif
// -------- UDPHS_EPTCFG : (UDPHS_EPT Offset: 0x0) UDPHS Endpoint Config Register -------- 
#define AT91C_UDPHS_EPT_SIZE  (0x7 <<  0) // (UDPHS_EPT) Endpoint Size
#define 	AT91C_UDPHS_EPT_SIZE_8                    (0x0) // (UDPHS_EPT)    8 bytes
#define 	AT91C_UDPHS_EPT_SIZE_16                   (0x1) // (UDPHS_EPT)   16 bytes
#define 	AT91C_UDPHS_EPT_SIZE_32                   (0x2) // (UDPHS_EPT)   32 bytes
#define 	AT91C_UDPHS_EPT_SIZE_64                   (0x3) // (UDPHS_EPT)   64 bytes
#define 	AT91C_UDPHS_EPT_SIZE_128                  (0x4) // (UDPHS_EPT)  128 bytes
#define 	AT91C_UDPHS_EPT_SIZE_256                  (0x5) // (UDPHS_EPT)  256 bytes
#define 	AT91C_UDPHS_EPT_SIZE_512                  (0x6) // (UDPHS_EPT)  512 bytes
#define 	AT91C_UDPHS_EPT_SIZE_1024                 (0x7) // (UDPHS_EPT) 1024 bytes
#define AT91C_UDPHS_EPT_DIR   (0x1 <<  3) // (UDPHS_EPT) Endpoint Direction 0:OUT, 1:IN
#define 	AT91C_UDPHS_EPT_DIR_OUT                  (0x0 <<  3) // (UDPHS_EPT) Direction OUT
#define 	AT91C_UDPHS_EPT_DIR_IN                   (0x1 <<  3) // (UDPHS_EPT) Direction IN
#define AT91C_UDPHS_EPT_TYPE  (0x3 <<  4) // (UDPHS_EPT) Endpoint Type
#define 	AT91C_UDPHS_EPT_TYPE_CTL_EPT              (0x0 <<  4) // (UDPHS_EPT) Control endpoint
#define 	AT91C_UDPHS_EPT_TYPE_ISO_EPT              (0x1 <<  4) // (UDPHS_EPT) Isochronous endpoint
#define 	AT91C_UDPHS_EPT_TYPE_BUL_EPT              (0x2 <<  4) // (UDPHS_EPT) Bulk endpoint
#define 	AT91C_UDPHS_EPT_TYPE_INT_EPT              (0x3 <<  4) // (UDPHS_EPT) Interrupt endpoint
#define AT91C_UDPHS_BK_NUMBER (0x3 <<  6) // (UDPHS_EPT) Number of Banks
#define 	AT91C_UDPHS_BK_NUMBER_0                    (0x0 <<  6) // (UDPHS_EPT) Zero Bank, the EndPoint is not mapped in memory
#define 	AT91C_UDPHS_BK_NUMBER_1                    (0x1 <<  6) // (UDPHS_EPT) One Bank (Bank0)
#define 	AT91C_UDPHS_BK_NUMBER_2                    (0x2 <<  6) // (UDPHS_EPT) Double bank (Ping-Pong : Bank0 / Bank1)
#define 	AT91C_UDPHS_BK_NUMBER_3                    (0x3 <<  6) // (UDPHS_EPT) Triple Bank (Bank0 / Bank1 / Bank2)
#define AT91C_UDPHS_NB_TRANS  (0x3 <<  8) // (UDPHS_EPT) Number Of Transaction per Micro-Frame (High-Bandwidth iso only)
#define AT91C_UDPHS_EPT_MAPD  (0x1 << 31) // (UDPHS_EPT) Endpoint Mapped (read only
// -------- UDPHS_EPTCTLENB : (UDPHS_EPT Offset: 0x4) UDPHS Endpoint Control Enable Register -------- 
#define AT91C_UDPHS_EPT_ENABL (0x1 <<  0) // (UDPHS_EPT) Endpoint Enable
#define AT91C_UDPHS_AUTO_VALID (0x1 <<  1) // (UDPHS_EPT) Packet Auto-Valid Enable/Disable
#define AT91C_UDPHS_INTDIS_DMA (0x1 <<  3) // (UDPHS_EPT) Endpoint Interrupts DMA Request Enable/Disable
#define AT91C_UDPHS_NYET_DIS  (0x1 <<  4) // (UDPHS_EPT) NYET Enable/Disable
#define AT91C_UDPHS_DATAX_RX  (0x1 <<  6) // (UDPHS_EPT) DATAx Interrupt Enable/Disable
#define AT91C_UDPHS_MDATA_RX  (0x1 <<  7) // (UDPHS_EPT) MDATA Interrupt Enabled/Disable
#define AT91C_UDPHS_ERR_OVFLW (0x1 <<  8) // (UDPHS_EPT) OverFlow Error Interrupt Enable/Disable/Status
#define AT91C_UDPHS_RX_BK_RDY (0x1 <<  9) // (UDPHS_EPT) Received OUT Data
#define AT91C_UDPHS_TX_COMPLT (0x1 << 10) // (UDPHS_EPT) Transmitted IN Data Complete Interrupt Enable/Disable or Transmitted IN Data Complete (clear)
#define AT91C_UDPHS_ERR_TRANS (0x1 << 11) // (UDPHS_EPT) Transaction Error Interrupt Enable/Disable
#define AT91C_UDPHS_TX_PK_RDY (0x1 << 11) // (UDPHS_EPT) TX Packet Ready Interrupt Enable/Disable
#define AT91C_UDPHS_RX_SETUP  (0x1 << 12) // (UDPHS_EPT) Received SETUP Interrupt Enable/Disable
#define AT91C_UDPHS_ERR_FL_ISO (0x1 << 12) // (UDPHS_EPT) Error Flow Clear/Interrupt Enable/Disable
#define AT91C_UDPHS_STALL_SNT (0x1 << 13) // (UDPHS_EPT) Stall Sent Clear
#define AT91C_UDPHS_ERR_CRISO (0x1 << 13) // (UDPHS_EPT) CRC error / Error NB Trans / Interrupt Enable/Disable
#define AT91C_UDPHS_NAK_IN    (0x1 << 14) // (UDPHS_EPT) NAKIN ERROR FLUSH / Clear / Interrupt Enable/Disable
#define AT91C_UDPHS_NAK_OUT   (0x1 << 15) // (UDPHS_EPT) NAKOUT / Clear / Interrupt Enable/Disable
#define AT91C_UDPHS_BUSY_BANK (0x1 << 18) // (UDPHS_EPT) Busy Bank Interrupt Enable/Disable
#define AT91C_UDPHS_SHRT_PCKT (0x1 << 31) // (UDPHS_EPT) Short Packet / Interrupt Enable/Disable
// -------- UDPHS_EPTCTLDIS : (UDPHS_EPT Offset: 0x8) UDPHS Endpoint Control Disable Register -------- 
#define AT91C_UDPHS_EPT_DISABL (0x1 <<  0) // (UDPHS_EPT) Endpoint Disable
// -------- UDPHS_EPTCTL : (UDPHS_EPT Offset: 0xc) UDPHS Endpoint Control Register -------- 
// -------- UDPHS_EPTSETSTA : (UDPHS_EPT Offset: 0x14) UDPHS Endpoint Set Status Register -------- 
#define AT91C_UDPHS_FRCESTALL (0x1 <<  5) // (UDPHS_EPT) Stall Handshake Request Set/Clear/Status
#define AT91C_UDPHS_KILL_BANK (0x1 <<  9) // (UDPHS_EPT) KILL Bank
// -------- UDPHS_EPTCLRSTA : (UDPHS_EPT Offset: 0x18) UDPHS Endpoint Clear Status Register -------- 
#define AT91C_UDPHS_TOGGLESQ  (0x1 <<  6) // (UDPHS_EPT) Data Toggle Clear
// -------- UDPHS_EPTSTA : (UDPHS_EPT Offset: 0x1c) UDPHS Endpoint Status Register -------- 
#define AT91C_UDPHS_TOGGLESQ_STA (0x3 <<  6) // (UDPHS_EPT) Toggle Sequencing
#define 	AT91C_UDPHS_TOGGLESQ_STA_00                   (0x0 <<  6) // (UDPHS_EPT) Data0
#define 	AT91C_UDPHS_TOGGLESQ_STA_01                   (0x1 <<  6) // (UDPHS_EPT) Data1
#define 	AT91C_UDPHS_TOGGLESQ_STA_10                   (0x2 <<  6) // (UDPHS_EPT) Data2 (only for High-Bandwidth Isochronous EndPoint)
#define 	AT91C_UDPHS_TOGGLESQ_STA_11                   (0x3 <<  6) // (UDPHS_EPT) MData (only for High-Bandwidth Isochronous EndPoint)
#define AT91C_UDPHS_CONTROL_DIR (0x3 << 16) // (UDPHS_EPT) 
#define 	AT91C_UDPHS_CONTROL_DIR_00                   (0x0 << 16) // (UDPHS_EPT) Bank 0
#define 	AT91C_UDPHS_CONTROL_DIR_01                   (0x1 << 16) // (UDPHS_EPT) Bank 1
#define 	AT91C_UDPHS_CONTROL_DIR_10                   (0x2 << 16) // (UDPHS_EPT) Bank 2
#define 	AT91C_UDPHS_CONTROL_DIR_11                   (0x3 << 16) // (UDPHS_EPT) Invalid
#define AT91C_UDPHS_CURRENT_BANK (0x3 << 16) // (UDPHS_EPT) 
#define 	AT91C_UDPHS_CURRENT_BANK_00                   (0x0 << 16) // (UDPHS_EPT) Bank 0
#define 	AT91C_UDPHS_CURRENT_BANK_01                   (0x1 << 16) // (UDPHS_EPT) Bank 1
#define 	AT91C_UDPHS_CURRENT_BANK_10                   (0x2 << 16) // (UDPHS_EPT) Bank 2
#define 	AT91C_UDPHS_CURRENT_BANK_11                   (0x3 << 16) // (UDPHS_EPT) Invalid
#define AT91C_UDPHS_BUSY_BANK_STA (0x3 << 18) // (UDPHS_EPT) Busy Bank Number
#define 	AT91C_UDPHS_BUSY_BANK_STA_00                   (0x0 << 18) // (UDPHS_EPT) All banks are free
#define 	AT91C_UDPHS_BUSY_BANK_STA_01                   (0x1 << 18) // (UDPHS_EPT) 1 busy bank
#define 	AT91C_UDPHS_BUSY_BANK_STA_10                   (0x2 << 18) // (UDPHS_EPT) 2 busy banks
#define 	AT91C_UDPHS_BUSY_BANK_STA_11                   (0x3 << 18) // (UDPHS_EPT) 3 busy banks
#define AT91C_UDPHS_BYTE_COUNT (0x7FF << 20) // (UDPHS_EPT) UDPHS Byte Count

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR UDPHS DMA struct
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_UDPHS_DMA {
	AT91_REG	 UDPHS_DMANXTDSC; 	// UDPHS DMA Channel Next Descriptor Address
	AT91_REG	 UDPHS_DMAADDRESS; 	// UDPHS DMA Channel Address Register
	AT91_REG	 UDPHS_DMACONTROL; 	// UDPHS DMA Channel Control Register
	AT91_REG	 UDPHS_DMASTATUS; 	// UDPHS DMA Channel Status Register
} AT91S_UDPHS_DMA, *AT91PS_UDPHS_DMA;
#else
#define UDPHS_DMANXTDSC (AT91_CAST(AT91_REG *) 	0x00000000) // (UDPHS_DMANXTDSC) UDPHS DMA Channel Next Descriptor Address
#define UDPHS_DMAADDRESS (AT91_CAST(AT91_REG *) 	0x00000004) // (UDPHS_DMAADDRESS) UDPHS DMA Channel Address Register
#define UDPHS_DMACONTROL (AT91_CAST(AT91_REG *) 	0x00000008) // (UDPHS_DMACONTROL) UDPHS DMA Channel Control Register
#define UDPHS_DMASTATUS (AT91_CAST(AT91_REG *) 	0x0000000C) // (UDPHS_DMASTATUS) UDPHS DMA Channel Status Register

#endif
// -------- UDPHS_DMANXTDSC : (UDPHS_DMA Offset: 0x0) UDPHS DMA Next Descriptor Address Register -------- 
#define AT91C_UDPHS_NXT_DSC_ADD (0xFFFFFFF <<  4) // (UDPHS_DMA) next Channel Descriptor
// -------- UDPHS_DMAADDRESS : (UDPHS_DMA Offset: 0x4) UDPHS DMA Channel Address Register -------- 
#define AT91C_UDPHS_BUFF_ADD  (0x0 <<  0) // (UDPHS_DMA) starting address of a DMA Channel transfer
// -------- UDPHS_DMACONTROL : (UDPHS_DMA Offset: 0x8) UDPHS DMA Channel Control Register -------- 
#define AT91C_UDPHS_CHANN_ENB (0x1 <<  0) // (UDPHS_DMA) Channel Enabled
#define AT91C_UDPHS_LDNXT_DSC (0x1 <<  1) // (UDPHS_DMA) Load Next Channel Transfer Descriptor Enable
#define AT91C_UDPHS_END_TR_EN (0x1 <<  2) // (UDPHS_DMA) Buffer Close Input Enable
#define AT91C_UDPHS_END_B_EN  (0x1 <<  3) // (UDPHS_DMA) End of DMA Buffer Packet Validation
#define AT91C_UDPHS_END_TR_IT (0x1 <<  4) // (UDPHS_DMA) End Of Transfer Interrupt Enable
#define AT91C_UDPHS_END_BUFFIT (0x1 <<  5) // (UDPHS_DMA) End Of Channel Buffer Interrupt Enable
#define AT91C_UDPHS_DESC_LD_IT (0x1 <<  6) // (UDPHS_DMA) Descriptor Loaded Interrupt Enable
#define AT91C_UDPHS_BURST_LCK (0x1 <<  7) // (UDPHS_DMA) Burst Lock Enable
#define AT91C_UDPHS_BUFF_LENGTH (0xFFFF << 16) // (UDPHS_DMA) Buffer Byte Length (write only)
// -------- UDPHS_DMASTATUS : (UDPHS_DMA Offset: 0xc) UDPHS DMA Channelx Status Register -------- 
#define AT91C_UDPHS_CHANN_ACT (0x1 <<  1) // (UDPHS_DMA) 
#define AT91C_UDPHS_END_TR_ST (0x1 <<  4) // (UDPHS_DMA) 
#define AT91C_UDPHS_END_BF_ST (0x1 <<  5) // (UDPHS_DMA) 
#define AT91C_UDPHS_DESC_LDST (0x1 <<  6) // (UDPHS_DMA) 
#define AT91C_UDPHS_BUFF_COUNT (0xFFFF << 16) // (UDPHS_DMA) 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR UDPHS High Speed Device Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_UDPHS {
	AT91_REG	 UDPHS_CTRL; 	// UDPHS Control Register
	AT91_REG	 UDPHS_FNUM; 	// UDPHS Frame Number Register
	AT91_REG	 Reserved0[2]; 	// 
	AT91_REG	 UDPHS_IEN; 	// UDPHS Interrupt Enable Register
	AT91_REG	 UDPHS_INTSTA; 	// UDPHS Interrupt Status Register
	AT91_REG	 UDPHS_CLRINT; 	// UDPHS Clear Interrupt Register
	AT91_REG	 UDPHS_EPTRST; 	// UDPHS Endpoints Reset Register
	AT91_REG	 Reserved1[44]; 	// 
	AT91_REG	 UDPHS_TSTSOFCNT; 	// UDPHS Test SOF Counter Register
	AT91_REG	 UDPHS_TSTCNTA; 	// UDPHS Test A Counter Register
	AT91_REG	 UDPHS_TSTCNTB; 	// UDPHS Test B Counter Register
	AT91_REG	 UDPHS_TSTMODREG; 	// UDPHS Test Mode Register
	AT91_REG	 UDPHS_TST; 	// UDPHS Test Register
	AT91_REG	 Reserved2[2]; 	// 
	AT91_REG	 UDPHS_RIPPADDRSIZE; 	// UDPHS PADDRSIZE Register
	AT91_REG	 UDPHS_RIPNAME1; 	// UDPHS Name1 Register
	AT91_REG	 UDPHS_RIPNAME2; 	// UDPHS Name2 Register
	AT91_REG	 UDPHS_IPFEATURES; 	// UDPHS Features Register
	AT91_REG	 UDPHS_IPVERSION; 	// UDPHS Version Register
	AT91S_UDPHS_EPT	 UDPHS_EPT[16]; 	// UDPHS Endpoint struct
	AT91S_UDPHS_DMA	 UDPHS_DMA[8]; 	// UDPHS DMA channel struct (not use [0])
} AT91S_UDPHS, *AT91PS_UDPHS;
#else
#define UDPHS_CTRL      (AT91_CAST(AT91_REG *) 	0x00000000) // (UDPHS_CTRL) UDPHS Control Register
#define UDPHS_FNUM      (AT91_CAST(AT91_REG *) 	0x00000004) // (UDPHS_FNUM) UDPHS Frame Number Register
#define UDPHS_IEN       (AT91_CAST(AT91_REG *) 	0x00000010) // (UDPHS_IEN) UDPHS Interrupt Enable Register
#define UDPHS_INTSTA    (AT91_CAST(AT91_REG *) 	0x00000014) // (UDPHS_INTSTA) UDPHS Interrupt Status Register
#define UDPHS_CLRINT    (AT91_CAST(AT91_REG *) 	0x00000018) // (UDPHS_CLRINT) UDPHS Clear Interrupt Register
#define UDPHS_EPTRST    (AT91_CAST(AT91_REG *) 	0x0000001C) // (UDPHS_EPTRST) UDPHS Endpoints Reset Register
#define UDPHS_TSTSOFCNT (AT91_CAST(AT91_REG *) 	0x000000D0) // (UDPHS_TSTSOFCNT) UDPHS Test SOF Counter Register
#define UDPHS_TSTCNTA   (AT91_CAST(AT91_REG *) 	0x000000D4) // (UDPHS_TSTCNTA) UDPHS Test A Counter Register
#define UDPHS_TSTCNTB   (AT91_CAST(AT91_REG *) 	0x000000D8) // (UDPHS_TSTCNTB) UDPHS Test B Counter Register
#define UDPHS_TSTMODREG (AT91_CAST(AT91_REG *) 	0x000000DC) // (UDPHS_TSTMODREG) UDPHS Test Mode Register
#define UDPHS_TST       (AT91_CAST(AT91_REG *) 	0x000000E0) // (UDPHS_TST) UDPHS Test Register
#define UDPHS_RIPPADDRSIZE (AT91_CAST(AT91_REG *) 	0x000000EC) // (UDPHS_RIPPADDRSIZE) UDPHS PADDRSIZE Register
#define UDPHS_RIPNAME1  (AT91_CAST(AT91_REG *) 	0x000000F0) // (UDPHS_RIPNAME1) UDPHS Name1 Register
#define UDPHS_RIPNAME2  (AT91_CAST(AT91_REG *) 	0x000000F4) // (UDPHS_RIPNAME2) UDPHS Name2 Register
#define UDPHS_IPFEATURES (AT91_CAST(AT91_REG *) 	0x000000F8) // (UDPHS_IPFEATURES) UDPHS Features Register
#define UDPHS_IPVERSION (AT91_CAST(AT91_REG *) 	0x000000FC) // (UDPHS_IPVERSION) UDPHS Version Register

#endif
// -------- UDPHS_CTRL : (UDPHS Offset: 0x0) UDPHS Control Register -------- 
#define AT91C_UDPHS_DEV_ADDR  (0x7F <<  0) // (UDPHS) UDPHS Address
#define AT91C_UDPHS_FADDR_EN  (0x1 <<  7) // (UDPHS) Function Address Enable
#define AT91C_UDPHS_EN_UDPHS  (0x1 <<  8) // (UDPHS) UDPHS Enable
#define AT91C_UDPHS_DETACH    (0x1 <<  9) // (UDPHS) Detach Command
#define AT91C_UDPHS_REWAKEUP  (0x1 << 10) // (UDPHS) Send Remote Wake Up
#define AT91C_UDPHS_PULLD_DIS (0x1 << 11) // (UDPHS) PullDown Disable
// -------- UDPHS_FNUM : (UDPHS Offset: 0x4) UDPHS Frame Number Register -------- 
#define AT91C_UDPHS_MICRO_FRAME_NUM (0x7 <<  0) // (UDPHS) Micro Frame Number
#define AT91C_UDPHS_FRAME_NUMBER (0x7FF <<  3) // (UDPHS) Frame Number as defined in the Packet Field Formats
#define AT91C_UDPHS_FNUM_ERR  (0x1 << 31) // (UDPHS) Frame Number CRC Error
// -------- UDPHS_IEN : (UDPHS Offset: 0x10) UDPHS Interrupt Enable Register -------- 
#define AT91C_UDPHS_DET_SUSPD (0x1 <<  1) // (UDPHS) Suspend Interrupt Enable/Clear/Status
#define AT91C_UDPHS_MICRO_SOF (0x1 <<  2) // (UDPHS) Micro-SOF Interrupt Enable/Clear/Status
#define AT91C_UDPHS_IEN_SOF   (0x1 <<  3) // (UDPHS) SOF Interrupt Enable/Clear/Status
#define AT91C_UDPHS_ENDRESET  (0x1 <<  4) // (UDPHS) End Of Reset Interrupt Enable/Clear/Status
#define AT91C_UDPHS_WAKE_UP   (0x1 <<  5) // (UDPHS) Wake Up CPU Interrupt Enable/Clear/Status
#define AT91C_UDPHS_ENDOFRSM  (0x1 <<  6) // (UDPHS) End Of Resume Interrupt Enable/Clear/Status
#define AT91C_UDPHS_UPSTR_RES (0x1 <<  7) // (UDPHS) Upstream Resume Interrupt Enable/Clear/Status
#define AT91C_UDPHS_EPT_INT_0 (0x1 <<  8) // (UDPHS) Endpoint 0 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_1 (0x1 <<  9) // (UDPHS) Endpoint 1 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_2 (0x1 << 10) // (UDPHS) Endpoint 2 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_3 (0x1 << 11) // (UDPHS) Endpoint 3 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_4 (0x1 << 12) // (UDPHS) Endpoint 4 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_5 (0x1 << 13) // (UDPHS) Endpoint 5 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_6 (0x1 << 14) // (UDPHS) Endpoint 6 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_7 (0x1 << 15) // (UDPHS) Endpoint 7 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_8 (0x1 << 16) // (UDPHS) Endpoint 8 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_9 (0x1 << 17) // (UDPHS) Endpoint 9 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_10 (0x1 << 18) // (UDPHS) Endpoint 10 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_11 (0x1 << 19) // (UDPHS) Endpoint 11 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_12 (0x1 << 20) // (UDPHS) Endpoint 12 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_13 (0x1 << 21) // (UDPHS) Endpoint 13 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_14 (0x1 << 22) // (UDPHS) Endpoint 14 Interrupt Enable/Status
#define AT91C_UDPHS_EPT_INT_15 (0x1 << 23) // (UDPHS) Endpoint 15 Interrupt Enable/Status
#define AT91C_UDPHS_DMA_INT_1 (0x1 << 25) // (UDPHS) DMA Channel 1 Interrupt Enable/Status
#define AT91C_UDPHS_DMA_INT_2 (0x1 << 26) // (UDPHS) DMA Channel 2 Interrupt Enable/Status
#define AT91C_UDPHS_DMA_INT_3 (0x1 << 27) // (UDPHS) DMA Channel 3 Interrupt Enable/Status
#define AT91C_UDPHS_DMA_INT_4 (0x1 << 28) // (UDPHS) DMA Channel 4 Interrupt Enable/Status
#define AT91C_UDPHS_DMA_INT_5 (0x1 << 29) // (UDPHS) DMA Channel 5 Interrupt Enable/Status
#define AT91C_UDPHS_DMA_INT_6 (0x1 << 30) // (UDPHS) DMA Channel 6 Interrupt Enable/Status
#define AT91C_UDPHS_DMA_INT_7 (0x1 << 31) // (UDPHS) DMA Channel 7 Interrupt Enable/Status
// -------- UDPHS_INTSTA : (UDPHS Offset: 0x14) UDPHS Interrupt Status Register -------- 
#define AT91C_UDPHS_SPEED     (0x1 <<  0) // (UDPHS) Speed Status
// -------- UDPHS_CLRINT : (UDPHS Offset: 0x18) UDPHS Clear Interrupt Register -------- 
// -------- UDPHS_EPTRST : (UDPHS Offset: 0x1c) UDPHS Endpoints Reset Register -------- 
#define AT91C_UDPHS_RST_EPT_0 (0x1 <<  0) // (UDPHS) Endpoint Reset 0
#define AT91C_UDPHS_RST_EPT_1 (0x1 <<  1) // (UDPHS) Endpoint Reset 1
#define AT91C_UDPHS_RST_EPT_2 (0x1 <<  2) // (UDPHS) Endpoint Reset 2
#define AT91C_UDPHS_RST_EPT_3 (0x1 <<  3) // (UDPHS) Endpoint Reset 3
#define AT91C_UDPHS_RST_EPT_4 (0x1 <<  4) // (UDPHS) Endpoint Reset 4
#define AT91C_UDPHS_RST_EPT_5 (0x1 <<  5) // (UDPHS) Endpoint Reset 5
#define AT91C_UDPHS_RST_EPT_6 (0x1 <<  6) // (UDPHS) Endpoint Reset 6
#define AT91C_UDPHS_RST_EPT_7 (0x1 <<  7) // (UDPHS) Endpoint Reset 7
#define AT91C_UDPHS_RST_EPT_8 (0x1 <<  8) // (UDPHS) Endpoint Reset 8
#define AT91C_UDPHS_RST_EPT_9 (0x1 <<  9) // (UDPHS) Endpoint Reset 9
#define AT91C_UDPHS_RST_EPT_10 (0x1 << 10) // (UDPHS) Endpoint Reset 10
#define AT91C_UDPHS_RST_EPT_11 (0x1 << 11) // (UDPHS) Endpoint Reset 11
#define AT91C_UDPHS_RST_EPT_12 (0x1 << 12) // (UDPHS) Endpoint Reset 12
#define AT91C_UDPHS_RST_EPT_13 (0x1 << 13) // (UDPHS) Endpoint Reset 13
#define AT91C_UDPHS_RST_EPT_14 (0x1 << 14) // (UDPHS) Endpoint Reset 14
#define AT91C_UDPHS_RST_EPT_15 (0x1 << 15) // (UDPHS) Endpoint Reset 15
// -------- UDPHS_TSTSOFCNT : (UDPHS Offset: 0xd0) UDPHS Test SOF Counter Register -------- 
#define AT91C_UDPHS_SOFCNTMAX (0x3 <<  0) // (UDPHS) SOF Counter Max Value
#define AT91C_UDPHS_SOFCTLOAD (0x1 <<  7) // (UDPHS) SOF Counter Load
// -------- UDPHS_TSTCNTA : (UDPHS Offset: 0xd4) UDPHS Test A Counter Register -------- 
#define AT91C_UDPHS_CNTAMAX   (0x7FFF <<  0) // (UDPHS) A Counter Max Value
#define AT91C_UDPHS_CNTALOAD  (0x1 << 15) // (UDPHS) A Counter Load
// -------- UDPHS_TSTCNTB : (UDPHS Offset: 0xd8) UDPHS Test B Counter Register -------- 
#define AT91C_UDPHS_CNTBMAX   (0x7FFF <<  0) // (UDPHS) B Counter Max Value
#define AT91C_UDPHS_CNTBLOAD  (0x1 << 15) // (UDPHS) B Counter Load
// -------- UDPHS_TSTMODREG : (UDPHS Offset: 0xdc) UDPHS Test Mode Register -------- 
#define AT91C_UDPHS_TSTMODE   (0x1F <<  1) // (UDPHS) UDPHS Core TestModeReg
// -------- UDPHS_TST : (UDPHS Offset: 0xe0) UDPHS Test Register -------- 
#define AT91C_UDPHS_SPEED_CFG (0x3 <<  0) // (UDPHS) Speed Configuration
#define 	AT91C_UDPHS_SPEED_CFG_NM                   (0x0) // (UDPHS) Normal Mode
#define 	AT91C_UDPHS_SPEED_CFG_RS                   (0x1) // (UDPHS) Reserved
#define 	AT91C_UDPHS_SPEED_CFG_HS                   (0x2) // (UDPHS) Force High Speed
#define 	AT91C_UDPHS_SPEED_CFG_FS                   (0x3) // (UDPHS) Force Full-Speed
#define AT91C_UDPHS_TST_J     (0x1 <<  2) // (UDPHS) TestJMode
#define AT91C_UDPHS_TST_K     (0x1 <<  3) // (UDPHS) TestKMode
#define AT91C_UDPHS_TST_PKT   (0x1 <<  4) // (UDPHS) TestPacketMode
#define AT91C_UDPHS_OPMODE2   (0x1 <<  5) // (UDPHS) OpMode2
// -------- UDPHS_RIPPADDRSIZE : (UDPHS Offset: 0xec) UDPHS PADDRSIZE Register -------- 
#define AT91C_UDPHS_IPPADDRSIZE (0x0 <<  0) // (UDPHS) 2^UDPHSDEV_PADDR_SIZE
// -------- UDPHS_RIPNAME1 : (UDPHS Offset: 0xf0) UDPHS Name Register -------- 
#define AT91C_UDPHS_IPNAME1   (0x0 <<  0) // (UDPHS) ASCII string HUSB
// -------- UDPHS_RIPNAME2 : (UDPHS Offset: 0xf4) UDPHS Name Register -------- 
#define AT91C_UDPHS_IPNAME2   (0x0 <<  0) // (UDPHS) ASCII string 2DEV
// -------- UDPHS_IPFEATURES : (UDPHS Offset: 0xf8) UDPHS Features Register -------- 
#define AT91C_UDPHS_EPT_NBR_MAX (0xF <<  0) // (UDPHS) Max Number of Endpoints
#define AT91C_UDPHS_DMA_CHANNEL_NBR (0x7 <<  4) // (UDPHS) Number of DMA Channels
#define AT91C_UDPHS_DMA_B_SIZ (0x1 <<  7) // (UDPHS) DMA Buffer Size
#define AT91C_UDPHS_DMA_FIFO_WORD_DEPTH (0xF <<  8) // (UDPHS) DMA FIFO Depth in words
#define AT91C_UDPHS_FIFO_MAX_SIZE (0x7 << 12) // (UDPHS) DPRAM size
#define AT91C_UDPHS_BW_DPRAM  (0x1 << 15) // (UDPHS) DPRAM byte write capability
#define AT91C_UDPHS_DATAB16_8 (0x1 << 16) // (UDPHS) UTMI DataBus16_8
#define AT91C_UDPHS_ISO_EPT_1 (0x1 << 17) // (UDPHS) Endpoint 1 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_2 (0x1 << 18) // (UDPHS) Endpoint 2 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_3 (0x1 << 19) // (UDPHS) Endpoint 3 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_4 (0x1 << 20) // (UDPHS) Endpoint 4 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_5 (0x1 << 21) // (UDPHS) Endpoint 5 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_6 (0x1 << 22) // (UDPHS) Endpoint 6 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_7 (0x1 << 23) // (UDPHS) Endpoint 7 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_8 (0x1 << 24) // (UDPHS) Endpoint 8 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_9 (0x1 << 25) // (UDPHS) Endpoint 9 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_10 (0x1 << 26) // (UDPHS) Endpoint 10 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_11 (0x1 << 27) // (UDPHS) Endpoint 11 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_12 (0x1 << 28) // (UDPHS) Endpoint 12 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_13 (0x1 << 29) // (UDPHS) Endpoint 13 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_14 (0x1 << 30) // (UDPHS) Endpoint 14 High Bandwidth Isochronous Capability
#define AT91C_UDPHS_ISO_EPT_15 (0x1 << 31) // (UDPHS) Endpoint 15 High Bandwidth Isochronous Capability
// -------- UDPHS_IPVERSION : (UDPHS Offset: 0xfc) UDPHS Version Register -------- 
#define AT91C_UDPHS_VERSION_NUM (0xFFFF <<  0) // (UDPHS) Give the IP version
#define AT91C_UDPHS_METAL_FIX_NUM (0x7 << 16) // (UDPHS) Give the number of metal fixes

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR USB Host Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_UHP {
	AT91_REG	 UHP_HcRevision; 	// Revision
	AT91_REG	 UHP_HcControl; 	// Operating modes for the Host Controller
	AT91_REG	 UHP_HcCommandStatus; 	// Command & status Register
	AT91_REG	 UHP_HcInterruptStatus; 	// Interrupt Status Register
	AT91_REG	 UHP_HcInterruptEnable; 	// Interrupt Enable Register
	AT91_REG	 UHP_HcInterruptDisable; 	// Interrupt Disable Register
	AT91_REG	 UHP_HcHCCA; 	// Pointer to the Host Controller Communication Area
	AT91_REG	 UHP_HcPeriodCurrentED; 	// Current Isochronous or Interrupt Endpoint Descriptor
	AT91_REG	 UHP_HcControlHeadED; 	// First Endpoint Descriptor of the Control list
	AT91_REG	 UHP_HcControlCurrentED; 	// Endpoint Control and Status Register
	AT91_REG	 UHP_HcBulkHeadED; 	// First endpoint register of the Bulk list
	AT91_REG	 UHP_HcBulkCurrentED; 	// Current endpoint of the Bulk list
	AT91_REG	 UHP_HcBulkDoneHead; 	// Last completed transfer descriptor
	AT91_REG	 UHP_HcFmInterval; 	// Bit time between 2 consecutive SOFs
	AT91_REG	 UHP_HcFmRemaining; 	// Bit time remaining in the current Frame
	AT91_REG	 UHP_HcFmNumber; 	// Frame number
	AT91_REG	 UHP_HcPeriodicStart; 	// Periodic Start
	AT91_REG	 UHP_HcLSThreshold; 	// LS Threshold
	AT91_REG	 UHP_HcRhDescriptorA; 	// Root Hub characteristics A
	AT91_REG	 UHP_HcRhDescriptorB; 	// Root Hub characteristics B
	AT91_REG	 UHP_HcRhStatus; 	// Root Hub Status register
	AT91_REG	 UHP_HcRhPortStatus[2]; 	// Root Hub Port Status Register
} AT91S_UHP, *AT91PS_UHP;
#else
#define HcRevision      (AT91_CAST(AT91_REG *) 	0x00000000) // (HcRevision) Revision
#define HcControl       (AT91_CAST(AT91_REG *) 	0x00000004) // (HcControl) Operating modes for the Host Controller
#define HcCommandStatus (AT91_CAST(AT91_REG *) 	0x00000008) // (HcCommandStatus) Command & status Register
#define HcInterruptStatus (AT91_CAST(AT91_REG *) 	0x0000000C) // (HcInterruptStatus) Interrupt Status Register
#define HcInterruptEnable (AT91_CAST(AT91_REG *) 	0x00000010) // (HcInterruptEnable) Interrupt Enable Register
#define HcInterruptDisable (AT91_CAST(AT91_REG *) 	0x00000014) // (HcInterruptDisable) Interrupt Disable Register
#define HcHCCA          (AT91_CAST(AT91_REG *) 	0x00000018) // (HcHCCA) Pointer to the Host Controller Communication Area
#define HcPeriodCurrentED (AT91_CAST(AT91_REG *) 	0x0000001C) // (HcPeriodCurrentED) Current Isochronous or Interrupt Endpoint Descriptor
#define HcControlHeadED (AT91_CAST(AT91_REG *) 	0x00000020) // (HcControlHeadED) First Endpoint Descriptor of the Control list
#define HcControlCurrentED (AT91_CAST(AT91_REG *) 	0x00000024) // (HcControlCurrentED) Endpoint Control and Status Register
#define HcBulkHeadED    (AT91_CAST(AT91_REG *) 	0x00000028) // (HcBulkHeadED) First endpoint register of the Bulk list
#define HcBulkCurrentED (AT91_CAST(AT91_REG *) 	0x0000002C) // (HcBulkCurrentED) Current endpoint of the Bulk list
#define HcBulkDoneHead  (AT91_CAST(AT91_REG *) 	0x00000030) // (HcBulkDoneHead) Last completed transfer descriptor
#define HcFmInterval    (AT91_CAST(AT91_REG *) 	0x00000034) // (HcFmInterval) Bit time between 2 consecutive SOFs
#define HcFmRemaining   (AT91_CAST(AT91_REG *) 	0x00000038) // (HcFmRemaining) Bit time remaining in the current Frame
#define HcFmNumber      (AT91_CAST(AT91_REG *) 	0x0000003C) // (HcFmNumber) Frame number
#define HcPeriodicStart (AT91_CAST(AT91_REG *) 	0x00000040) // (HcPeriodicStart) Periodic Start
#define HcLSThreshold   (AT91_CAST(AT91_REG *) 	0x00000044) // (HcLSThreshold) LS Threshold
#define HcRhDescriptorA (AT91_CAST(AT91_REG *) 	0x00000048) // (HcRhDescriptorA) Root Hub characteristics A
#define HcRhDescriptorB (AT91_CAST(AT91_REG *) 	0x0000004C) // (HcRhDescriptorB) Root Hub characteristics B
#define HcRhStatus      (AT91_CAST(AT91_REG *) 	0x00000050) // (HcRhStatus) Root Hub Status register
#define HcRhPortStatus  (AT91_CAST(AT91_REG *) 	0x00000054) // (HcRhPortStatus) Root Hub Port Status Register

#endif

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR GPS engine from Thales
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_GPS {
	AT91_REG	 Reserved0[135]; 	// 
	AT91_REG	 GPS_CORRSWAP32; 	// 
	AT91_REG	 GPS_CORRSWAP16; 	// 
	AT91_REG	 GPS_CORRSWAPWRITE; 	// 
	AT91_REG	 Reserved1[118]; 	// 
	AT91_REG	 GPS_PERIPHCNTRREG; 	// 
	AT91_REG	 GPS_CONFIGREG; 	// 
	AT91_REG	 GPS_STATUSREG; 	// 
	AT91_REG	 GPS_ACQTIMEREG; 	// 
	AT91_REG	 GPS_THRESHACQREG; 	// 
	AT91_REG	 GPS_SYNCMLREG; 	// 
	AT91_REG	 GPS_SYNCMHREG; 	// 
	AT91_REG	 GPS_CARRNCOREG; 	// 
	AT91_REG	 GPS_CODENCOREG; 	// 
	AT91_REG	 GPS_PROCTIMEREG; 	// 
	AT91_REG	 GPS_PROCNCREG; 	// 
	AT91_REG	 GPS_SATREG; 	// 
	AT91_REG	 GPS_DOPSTARTREG; 	// 
	AT91_REG	 GPS_DOPENDREG; 	// 
	AT91_REG	 GPS_DOPSTEPREG; 	// 
	AT91_REG	 GPS_SEARCHWINREG; 	// 
	AT91_REG	 GPS_INITFIRSTNBREG; 	// 
	AT91_REG	 GPS_NAVBITLREG; 	// 
	AT91_REG	 GPS_NAVBITHREG; 	// 
	AT91_REG	 GPS_PROCFIFOTHRESH; 	// 
	AT91_REG	 GPS_RESAMPREG; 	// 
	AT91_REG	 GPS_RESPOSREG; 	// 
	AT91_REG	 GPS_RESDOPREG; 	// 
	AT91_REG	 GPS_RESNOISEREG; 	// 
	AT91_REG	 GPS_ACQTESTREG; 	// 
	AT91_REG	 GPS_PROCTESTREG; 	// 
	AT91_REG	 Reserved2[1]; 	// 
	AT91_REG	 GPS_VERSIONREG; 	// GPS Engine revision register
} AT91S_GPS, *AT91PS_GPS;
#else
#define GPS_CORRSWAP32  (AT91_CAST(AT91_REG *) 	0x0000021C) // (GPS_CORRSWAP32) 
#define GPS_CORRSWAP16  (AT91_CAST(AT91_REG *) 	0x00000220) // (GPS_CORRSWAP16) 
#define GPS_CORRSWAPWRITE (AT91_CAST(AT91_REG *) 	0x00000224) // (GPS_CORRSWAPWRITE) 
#define GPS_PERIPHCNTRREG (AT91_CAST(AT91_REG *) 	0x00000400) // (GPS_PERIPHCNTRREG) 
#define GPS_CONFIGREG   (AT91_CAST(AT91_REG *) 	0x00000404) // (GPS_CONFIGREG) 
#define GPS_STATUSREG   (AT91_CAST(AT91_REG *) 	0x00000408) // (GPS_STATUSREG) 
#define GPS_ACQTIMEREG  (AT91_CAST(AT91_REG *) 	0x0000040C) // (GPS_ACQTIMEREG) 
#define GPS_THRESHACQREG (AT91_CAST(AT91_REG *) 	0x00000410) // (GPS_THRESHACQREG) 
#define GPS_SYNCMLREG   (AT91_CAST(AT91_REG *) 	0x00000414) // (GPS_SYNCMLREG) 
#define GPS_SYNCMHREG   (AT91_CAST(AT91_REG *) 	0x00000418) // (GPS_SYNCMHREG) 
#define GPS_CARRNCOREG  (AT91_CAST(AT91_REG *) 	0x0000041C) // (GPS_CARRNCOREG) 
#define GPS_CODENCOREG  (AT91_CAST(AT91_REG *) 	0x00000420) // (GPS_CODENCOREG) 
#define GPS_PROCTIMEREG (AT91_CAST(AT91_REG *) 	0x00000424) // (GPS_PROCTIMEREG) 
#define GPS_PROCNCREG   (AT91_CAST(AT91_REG *) 	0x00000428) // (GPS_PROCNCREG) 
#define GPS_SATREG      (AT91_CAST(AT91_REG *) 	0x0000042C) // (GPS_SATREG) 
#define GPS_DOPSTARTREG (AT91_CAST(AT91_REG *) 	0x00000430) // (GPS_DOPSTARTREG) 
#define GPS_DOPENDREG   (AT91_CAST(AT91_REG *) 	0x00000434) // (GPS_DOPENDREG) 
#define GPS_DOPSTEPREG  (AT91_CAST(AT91_REG *) 	0x00000438) // (GPS_DOPSTEPREG) 
#define GPS_SEARCHWINREG (AT91_CAST(AT91_REG *) 	0x0000043C) // (GPS_SEARCHWINREG) 
#define GPS_INITFIRSTNBREG (AT91_CAST(AT91_REG *) 	0x00000440) // (GPS_INITFIRSTNBREG) 
#define GPS_NAVBITLREG  (AT91_CAST(AT91_REG *) 	0x00000444) // (GPS_NAVBITLREG) 
#define GPS_NAVBITHREG  (AT91_CAST(AT91_REG *) 	0x00000448) // (GPS_NAVBITHREG) 
#define GPS_PROCFIFOTHRESH (AT91_CAST(AT91_REG *) 	0x0000044C) // (GPS_PROCFIFOTHRESH) 
#define GPS_RESAMPREG   (AT91_CAST(AT91_REG *) 	0x00000450) // (GPS_RESAMPREG) 
#define GPS_RESPOSREG   (AT91_CAST(AT91_REG *) 	0x00000454) // (GPS_RESPOSREG) 
#define GPS_RESDOPREG   (AT91_CAST(AT91_REG *) 	0x00000458) // (GPS_RESDOPREG) 
#define GPS_RESNOISEREG (AT91_CAST(AT91_REG *) 	0x0000045C) // (GPS_RESNOISEREG) 
#define GPS_ACQTESTREG  (AT91_CAST(AT91_REG *) 	0x00000460) // (GPS_ACQTESTREG) 
#define GPS_PROCTESTREG (AT91_CAST(AT91_REG *) 	0x00000464) // (GPS_PROCTESTREG) 
#define GPS_VERSIONREG  (AT91_CAST(AT91_REG *) 	0x0000046C) // (GPS_VERSIONREG) GPS Engine revision register

#endif
// -------- GPS_CORRSWAP32 : (GPS Offset: 0x21c)  -------- 
#define AT91C_GPS_32TOBEDEFINED (0x0 <<  0) // (GPS) To be defined....
// -------- GPS_CORRSWAP16 : (GPS Offset: 0x220)  -------- 
// -------- GPS_CORRSWAPWRITE : (GPS Offset: 0x224)  -------- 
// -------- GPS_PERIPHCNTRREG : (GPS Offset: 0x400)  -------- 
#define AT91C_GPS_AFMTSEL     (0x0 <<  0) // (GPS) 
#define AT91C_GPS_BFMTSEL     (0x0 <<  1) // (GPS) 
#define AT91C_GPS_CBUFFEN     (0x0 <<  2) // (GPS) 
#define AT91C_GPS_MSTRSYNCSEL (0x0 <<  3) // (GPS) 
#define AT91C_GPS_SYNCSEL     (0x0 <<  4) // (GPS) 
#define AT91C_GPS_EDGESEL     (0x0 <<  5) // (GPS) 
#define AT91C_GPS_EPSSRCSEL   (0x0 <<  6) // (GPS) 
#define AT91C_GPS_CORRSRCSEL  (0x0 <<  7) // (GPS) 
#define AT91C_GPS_OUTPUTSRCSEL (0x0 <<  9) // (GPS) 
#define AT91C_GPS_EPSCLKEN    (0x0 << 11) // (GPS) 
#define AT91C_GPS_CORRCLKEN   (0x0 << 12) // (GPS) 
// -------- GPS_CONFIGREG : (GPS Offset: 0x404)  -------- 
#define AT91C_GPS_MODESELECT  (0x7 <<  0) // (GPS) Epsilon mode selection
#define AT91C_GPS_ENSYNC      (0x1 <<  3) // (GPS) Enable for input synchro pulse
#define AT91C_GPS_SELABC      (0x3 <<  4) // (GPS) Select a,b,c inputs
#define AT91C_GPS_ACQQUANT    (0x3 <<  6) // (GPS) 
#define AT91C_GPS_REALCOMPLEX (0x1 <<  8) // (GPS) Real to complex control
#define AT91C_GPS_STARTACQMODE (0x1 <<  9) // (GPS) 
#define AT91C_GPS_GPSGLO      (0x1 << 10) // (GPS) 
#define AT91C_GPS_TSTOUTSELECT (0x1F << 11) // (GPS) 
#define AT91C_GPS_TSTIQINPUT  (0x1 << 16) // (GPS) 
// -------- GPS_STATUSREG : (GPS Offset: 0x408)  -------- 
#define AT91C_GPS_ACQSTATUS   (0x1 <<  0) // (GPS) ?
#define AT91C_GPS_PROCSTATUS  (0x1 <<  8) // (GPS) ?
// -------- GPS_ACQTIMEREG : (GPS Offset: 0x40c)  -------- 
// -------- GPS_THRESHACQREG : (GPS Offset: 0x410)  -------- 
// -------- GPS_SYNCMLREG : (GPS Offset: 0x414)  -------- 
// -------- GPS_SYNCMHREG : (GPS Offset: 0x418)  -------- 
// -------- GPS_CARRNCOREG : (GPS Offset: 0x41c)  -------- 
// -------- GPS_CODENCOREG : (GPS Offset: 0x420)  -------- 
// -------- GPS_PROCNCREG : (GPS Offset: 0x428)  -------- 
// -------- GPS_SATREG : (GPS Offset: 0x42c)  -------- 
// -------- GPS_DOPSTARTREG : (GPS Offset: 0x430)  -------- 
// -------- GPS_DOPENDREG : (GPS Offset: 0x434)  -------- 
// -------- GPS_DOPSTEPREG : (GPS Offset: 0x438)  -------- 
// -------- GPS_SEARCHWINREG : (GPS Offset: 0x43c)  -------- 
// -------- GPS_INITFIRSTNBREG : (GPS Offset: 0x440)  -------- 
// -------- GPS_NAVBITLREG : (GPS Offset: 0x444)  -------- 
// -------- GPS_NAVBITHREG : (GPS Offset: 0x448)  -------- 
// -------- GPS_PROCFIFOTHRESH : (GPS Offset: 0x44c)  -------- 
// -------- GPS_RESAMPREG : (GPS Offset: 0x450)  -------- 
// -------- GPS_RESPOSREG : (GPS Offset: 0x454)  -------- 
// -------- GPS_RESDOPREG : (GPS Offset: 0x458)  -------- 
// -------- GPS_RESNOISEREG : (GPS Offset: 0x45c)  -------- 
// -------- GPS_ACQTESTREG : (GPS Offset: 0x460)  -------- 
// -------- GPS_PROCTESTREG : (GPS Offset: 0x464)  -------- 
// -------- GPS_VERSIONREG : (GPS Offset: 0x46c)  -------- 

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Trickbox (external) / SIMULATION ONLY
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_TBOX {
	AT91_REG	 TBOX_SHMCTRL; 	// SHM Probe Control: 0-> shm probe stopped, 1: shm probe started
	AT91_REG	 Reserved0[515]; 	// 
	AT91_REG	 TBOX_DMAEXTREQ; 	// DMA External request lines 3 to 0
	AT91_REG	 Reserved1[59]; 	// 
	AT91_REG	 TBOX_PIOAPUN; 	// Spy on PIO PUN inputs
	AT91_REG	 TBOX_PIOBPUN; 	// Spy on PIO PUN inputs
	AT91_REG	 TBOX_PIOCPUN; 	// Spy on PIO PUN inputs
	AT91_REG	 TBOX_PIODPUN; 	// Spy on PIO PUN inputs
	AT91_REG	 TBOX_PIOEPUN; 	// Spy on PIO PUN inputs
	AT91_REG	 TBOX_PIOAENABLEFORCE; 	// If each bit is 1, the corresponding bit of PIOA is controlled by TBOX_PIOAFORCEVALUE
	AT91_REG	 TBOX_PIOAFORCEVALUE; 	// Value to force on PIOA when bits TBOX_PIOAENABLEFORCE are 1
	AT91_REG	 TBOX_PIOBENABLEFORCE; 	// If each bit is 1, the corresponding bit of PIOB is controlled by TBOX_PIOBFORCEVALUE
	AT91_REG	 TBOX_PIOBFORCEVALUE; 	// Value to force on PIOA when bits TBOX_PIOBENABLEFORCE are 1
	AT91_REG	 TBOX_PIOCENABLEFORCE; 	// If each bit is 1, the corresponding bit of PIOC is controlled by TBOX_PIOCFORCEVALUE
	AT91_REG	 TBOX_PIOCFORCEVALUE; 	// Value to force on PIOA when bits TBOX_PIOCENABLEFORCE are 1
	AT91_REG	 TBOX_PIODENABLEFORCE; 	// If each bit is 1, the corresponding bit of PIOD is controlled by TBOX_PIODFORCEVALUE
	AT91_REG	 TBOX_PIODFORCEVALUE; 	// Value to force on PIOA when bits TBOX_PIODENABLEFORCE are 1
	AT91_REG	 TBOX_PIOEENABLEFORCE; 	// If each bit is 1, the corresponding bit of PIOE is controlled by TBOX_PIOEFORCEVALUE
	AT91_REG	 TBOX_PIOEFORCEVALUE; 	// Value to force on PIOA when bits TBOX_PIOEENABLEFORCE are 1
	AT91_REG	 TBOX_PIOA; 	// Value Of PIOA
	AT91_REG	 TBOX_PIOB; 	// Value Of PIOB
	AT91_REG	 TBOX_PIOC; 	// Value Of PIOC
	AT91_REG	 TBOX_PIOD; 	// Value Of PIOD
	AT91_REG	 TBOX_PIOE; 	// Value Of PIOE
	AT91_REG	 Reserved2[44]; 	// 
	AT91_REG	 TBOX_AC97START; 	// Start of AC97 test: swith PIO mux to connect PIOs to audio codec model.
	AT91_REG	 TBOX_PWMSTART; 	// Start of PWM test: Start to count edges on PWM IOs
	AT91_REG	 TBOX_PWM1; 	// PWM1[4:0]=nb pulses on pb7, PWM1[9:5]=nb pulses on pc28, PWM1[20:16]=nb pulses on pb8, PWM1[25:21]=nb pulses on pc3
	AT91_REG	 TBOX_PWM2; 	// PWM2[3:0]=nb pulses on pb27, PWM2[7:4]=nb pulses on pc29, PWM2[19:16]=nb pulses on pb29, PWM2[23:20]=nb pulses on pe10
	AT91_REG	 TBOX_MAC; 	// MAC testbench : bit 0 = rxtrig, bit 1 = clkofftester, bit 2 = err_sig_loops
	AT91_REG	 TBOX_USBDEV; 	// USB device testbench : bit 0 = flag0, bit 1 = flag1
	AT91_REG	 TBOX_KBD; 	// Keyboard testbench : bit 0 = keypressed; bits[7:6] = key column; bits[5:4] = key row;
	AT91_REG	 TBOX_STOPAPBSPY; 	// When 1, no more APB SPY messages
	AT91_REG	 Reserved3[56]; 	// 
	AT91_REG	 TBOX_GPSSYNCHRO; 	// GPS synchronization (Stimulus)
	AT91_REG	 TBOX_GPSRAND; 	// GPS random data for correlator (Stimulus - Internal Node)
	AT91_REG	 TBOX_GPSACQSTATUS; 	// GPS acquisition status (Probe - Internal Node)
	AT91_REG	 TBOX_GPSACQDATA; 	// GPS acquisition data (Probe - Internal Node)
	AT91_REG	 Reserved4[36]; 	// 
	AT91_REG	 TBOX_GPSSIGFILE; 	// GPS RFIN/DRFIN driven from files/Samples_GPS.data
	AT91_REG	 TBOX_GPSSIGIA; 	// GPS DRFIN[1:0] aka SIGI_A (Stimulus)
	AT91_REG	 TBOX_GPSSIGQA; 	// GPS DRFIN[3:2] aka SIGQ_A (Stimulus)
	AT91_REG	 Reserved5[1]; 	// 
	AT91_REG	 TBOX_GPSSIGIB; 	// GPS DRFIN[5:4] aka SIGI_B (Stimulus)
	AT91_REG	 TBOX_GPSSIGQB; 	// GPS DRFIN[7:6] aka SIGQ_B (Stimulus)
	AT91_REG	 Reserved6[2]; 	// 
	AT91_REG	 TBOX_GPSDUMPRES; 	// GPS Dump results and errors
} AT91S_TBOX, *AT91PS_TBOX;
#else
#define TBOX_SHMCTRL    (AT91_CAST(AT91_REG *) 	0x00000000) // (TBOX_SHMCTRL) SHM Probe Control: 0-> shm probe stopped, 1: shm probe started
#define TBOX_DMAEXTREQ  (AT91_CAST(AT91_REG *) 	0x00000810) // (TBOX_DMAEXTREQ) DMA External request lines 3 to 0
#define TBOX_PIOAPUN    (AT91_CAST(AT91_REG *) 	0x00000900) // (TBOX_PIOAPUN) Spy on PIO PUN inputs
#define TBOX_PIOBPUN    (AT91_CAST(AT91_REG *) 	0x00000904) // (TBOX_PIOBPUN) Spy on PIO PUN inputs
#define TBOX_PIOCPUN    (AT91_CAST(AT91_REG *) 	0x00000908) // (TBOX_PIOCPUN) Spy on PIO PUN inputs
#define TBOX_PIODPUN    (AT91_CAST(AT91_REG *) 	0x0000090C) // (TBOX_PIODPUN) Spy on PIO PUN inputs
#define TBOX_PIOEPUN    (AT91_CAST(AT91_REG *) 	0x00000910) // (TBOX_PIOEPUN) Spy on PIO PUN inputs
#define TBOX_PIOAENABLEFORCE (AT91_CAST(AT91_REG *) 	0x00000914) // (TBOX_PIOAENABLEFORCE) If each bit is 1, the corresponding bit of PIOA is controlled by TBOX_PIOAFORCEVALUE
#define TBOX_PIOAFORCEVALUE (AT91_CAST(AT91_REG *) 	0x00000918) // (TBOX_PIOAFORCEVALUE) Value to force on PIOA when bits TBOX_PIOAENABLEFORCE are 1
#define TBOX_PIOBENABLEFORCE (AT91_CAST(AT91_REG *) 	0x0000091C) // (TBOX_PIOBENABLEFORCE) If each bit is 1, the corresponding bit of PIOB is controlled by TBOX_PIOBFORCEVALUE
#define TBOX_PIOBFORCEVALUE (AT91_CAST(AT91_REG *) 	0x00000920) // (TBOX_PIOBFORCEVALUE) Value to force on PIOA when bits TBOX_PIOBENABLEFORCE are 1
#define TBOX_PIOCENABLEFORCE (AT91_CAST(AT91_REG *) 	0x00000924) // (TBOX_PIOCENABLEFORCE) If each bit is 1, the corresponding bit of PIOC is controlled by TBOX_PIOCFORCEVALUE
#define TBOX_PIOCFORCEVALUE (AT91_CAST(AT91_REG *) 	0x00000928) // (TBOX_PIOCFORCEVALUE) Value to force on PIOA when bits TBOX_PIOCENABLEFORCE are 1
#define TBOX_PIODENABLEFORCE (AT91_CAST(AT91_REG *) 	0x0000092C) // (TBOX_PIODENABLEFORCE) If each bit is 1, the corresponding bit of PIOD is controlled by TBOX_PIODFORCEVALUE
#define TBOX_PIODFORCEVALUE (AT91_CAST(AT91_REG *) 	0x00000930) // (TBOX_PIODFORCEVALUE) Value to force on PIOA when bits TBOX_PIODENABLEFORCE are 1
#define TBOX_PIOEENABLEFORCE (AT91_CAST(AT91_REG *) 	0x00000934) // (TBOX_PIOEENABLEFORCE) If each bit is 1, the corresponding bit of PIOE is controlled by TBOX_PIOEFORCEVALUE
#define TBOX_PIOEFORCEVALUE (AT91_CAST(AT91_REG *) 	0x00000938) // (TBOX_PIOEFORCEVALUE) Value to force on PIOA when bits TBOX_PIOEENABLEFORCE are 1
#define TBOX_PIOA       (AT91_CAST(AT91_REG *) 	0x0000093C) // (TBOX_PIOA) Value Of PIOA
#define TBOX_PIOB       (AT91_CAST(AT91_REG *) 	0x00000940) // (TBOX_PIOB) Value Of PIOB
#define TBOX_PIOC       (AT91_CAST(AT91_REG *) 	0x00000944) // (TBOX_PIOC) Value Of PIOC
#define TBOX_PIOD       (AT91_CAST(AT91_REG *) 	0x00000948) // (TBOX_PIOD) Value Of PIOD
#define TBOX_PIOE       (AT91_CAST(AT91_REG *) 	0x0000094C) // (TBOX_PIOE) Value Of PIOE
#define TBOX_AC97START  (AT91_CAST(AT91_REG *) 	0x00000A00) // (TBOX_AC97START) Start of AC97 test: swith PIO mux to connect PIOs to audio codec model.
#define TBOX_PWMSTART   (AT91_CAST(AT91_REG *) 	0x00000A04) // (TBOX_PWMSTART) Start of PWM test: Start to count edges on PWM IOs
#define TBOX_PWM1       (AT91_CAST(AT91_REG *) 	0x00000A08) // (TBOX_PWM1) PWM1[4:0]=nb pulses on pb7, PWM1[9:5]=nb pulses on pc28, PWM1[20:16]=nb pulses on pb8, PWM1[25:21]=nb pulses on pc3
#define TBOX_PWM2       (AT91_CAST(AT91_REG *) 	0x00000A0C) // (TBOX_PWM2) PWM2[3:0]=nb pulses on pb27, PWM2[7:4]=nb pulses on pc29, PWM2[19:16]=nb pulses on pb29, PWM2[23:20]=nb pulses on pe10
#define TBOX_MAC        (AT91_CAST(AT91_REG *) 	0x00000A10) // (TBOX_MAC) MAC testbench : bit 0 = rxtrig, bit 1 = clkofftester, bit 2 = err_sig_loops
#define TBOX_USBDEV     (AT91_CAST(AT91_REG *) 	0x00000A14) // (TBOX_USBDEV) USB device testbench : bit 0 = flag0, bit 1 = flag1
#define TBOX_KBD        (AT91_CAST(AT91_REG *) 	0x00000A18) // (TBOX_KBD) Keyboard testbench : bit 0 = keypressed; bits[7:6] = key column; bits[5:4] = key row;
#define TBOX_STOPAPBSPY (AT91_CAST(AT91_REG *) 	0x00000A1C) // (TBOX_STOPAPBSPY) When 1, no more APB SPY messages
#define TBOX_GPSSYNCHRO (AT91_CAST(AT91_REG *) 	0x00000B00) // (TBOX_GPSSYNCHRO) GPS synchronization (Stimulus)
#define TBOX_GPSRAND    (AT91_CAST(AT91_REG *) 	0x00000B04) // (TBOX_GPSRAND) GPS random data for correlator (Stimulus - Internal Node)
#define TBOX_GPSACQSTATUS (AT91_CAST(AT91_REG *) 	0x00000B08) // (TBOX_GPSACQSTATUS) GPS acquisition status (Probe - Internal Node)
#define TBOX_GPSACQDATA (AT91_CAST(AT91_REG *) 	0x00000B0C) // (TBOX_GPSACQDATA) GPS acquisition data (Probe - Internal Node)
#define TBOX_GPSSIGFILE (AT91_CAST(AT91_REG *) 	0x00000BA0) // (TBOX_GPSSIGFILE) GPS RFIN/DRFIN driven from files/Samples_GPS.data
#define TBOX_GPSSIGIA   (AT91_CAST(AT91_REG *) 	0x00000BA4) // (TBOX_GPSSIGIA) GPS DRFIN[1:0] aka SIGI_A (Stimulus)
#define TBOX_GPSSIGQA   (AT91_CAST(AT91_REG *) 	0x00000BA8) // (TBOX_GPSSIGQA) GPS DRFIN[3:2] aka SIGQ_A (Stimulus)
#define TBOX_GPSSIGIB   (AT91_CAST(AT91_REG *) 	0x00000BB0) // (TBOX_GPSSIGIB) GPS DRFIN[5:4] aka SIGI_B (Stimulus)
#define TBOX_GPSSIGQB   (AT91_CAST(AT91_REG *) 	0x00000BB4) // (TBOX_GPSSIGQB) GPS DRFIN[7:6] aka SIGQ_B (Stimulus)
#define TBOX_GPSDUMPRES (AT91_CAST(AT91_REG *) 	0x00000BC0) // (TBOX_GPSDUMPRES) GPS Dump results and errors

#endif
// -------- TBOX_DMAEXTREQ : (TBOX Offset: 0x810)  -------- 
#define AT91C_TBOX_DMAEXTREQ0 (0x1 <<  0) // (TBOX) DMA external request 0
#define AT91C_TBOX_DMAEXTREQ1 (0x1 <<  1) // (TBOX) DMA external request 1
#define AT91C_TBOX_DMAEXTREQ2 (0x1 <<  2) // (TBOX) DMA external request 2
#define AT91C_TBOX_DMAEXTREQ3 (0x1 <<  3) // (TBOX) DMA external request 3

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Advanced  Encryption Standard
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_AES {
	AT91_REG	 AES_CR; 	// Control Register
	AT91_REG	 AES_MR; 	// Mode Register
	AT91_REG	 Reserved0[2]; 	// 
	AT91_REG	 AES_IER; 	// Interrupt Enable Register
	AT91_REG	 AES_IDR; 	// Interrupt Disable Register
	AT91_REG	 AES_IMR; 	// Interrupt Mask Register
	AT91_REG	 AES_ISR; 	// Interrupt Status Register
	AT91_REG	 AES_KEYWxR[4]; 	// Key Word x Register
	AT91_REG	 Reserved1[4]; 	// 
	AT91_REG	 AES_IDATAxR[4]; 	// Input Data x Register
	AT91_REG	 AES_ODATAxR[4]; 	// Output Data x Register
	AT91_REG	 AES_IVxR[4]; 	// Initialization Vector x Register
	AT91_REG	 Reserved2[35]; 	// 
	AT91_REG	 AES_VR; 	// AES Version Register
	AT91_REG	 AES_RPR; 	// Receive Pointer Register
	AT91_REG	 AES_RCR; 	// Receive Counter Register
	AT91_REG	 AES_TPR; 	// Transmit Pointer Register
	AT91_REG	 AES_TCR; 	// Transmit Counter Register
	AT91_REG	 AES_RNPR; 	// Receive Next Pointer Register
	AT91_REG	 AES_RNCR; 	// Receive Next Counter Register
	AT91_REG	 AES_TNPR; 	// Transmit Next Pointer Register
	AT91_REG	 AES_TNCR; 	// Transmit Next Counter Register
	AT91_REG	 AES_PTCR; 	// PDC Transfer Control Register
	AT91_REG	 AES_PTSR; 	// PDC Transfer Status Register
} AT91S_AES, *AT91PS_AES;
#else
#define AES_CR          (AT91_CAST(AT91_REG *) 	0x00000000) // (AES_CR) Control Register
#define AES_MR          (AT91_CAST(AT91_REG *) 	0x00000004) // (AES_MR) Mode Register
#define AES_IER         (AT91_CAST(AT91_REG *) 	0x00000010) // (AES_IER) Interrupt Enable Register
#define AES_IDR         (AT91_CAST(AT91_REG *) 	0x00000014) // (AES_IDR) Interrupt Disable Register
#define AES_IMR         (AT91_CAST(AT91_REG *) 	0x00000018) // (AES_IMR) Interrupt Mask Register
#define AES_ISR         (AT91_CAST(AT91_REG *) 	0x0000001C) // (AES_ISR) Interrupt Status Register
#define AES_KEYWxR      (AT91_CAST(AT91_REG *) 	0x00000020) // (AES_KEYWxR) Key Word x Register
#define AES_IDATAxR     (AT91_CAST(AT91_REG *) 	0x00000040) // (AES_IDATAxR) Input Data x Register
#define AES_ODATAxR     (AT91_CAST(AT91_REG *) 	0x00000050) // (AES_ODATAxR) Output Data x Register
#define AES_IVxR        (AT91_CAST(AT91_REG *) 	0x00000060) // (AES_IVxR) Initialization Vector x Register
#define AES_VR          (AT91_CAST(AT91_REG *) 	0x000000FC) // (AES_VR) AES Version Register

#endif
// -------- AES_CR : (AES Offset: 0x0) Control Register -------- 
#define AT91C_AES_START       (0x1 <<  0) // (AES) Starts Processing
#define AT91C_AES_SWRST       (0x1 <<  8) // (AES) Software Reset
#define AT91C_AES_LOADSEED    (0x1 << 16) // (AES) Random Number Generator Seed Loading
// -------- AES_MR : (AES Offset: 0x4) Mode Register -------- 
#define AT91C_AES_CIPHER      (0x1 <<  0) // (AES) Processing Mode
#define AT91C_AES_PROCDLY     (0xF <<  4) // (AES) Processing Delay
#define AT91C_AES_SMOD        (0x3 <<  8) // (AES) Start Mode
#define 	AT91C_AES_SMOD_MANUAL               (0x0 <<  8) // (AES) Manual Mode: The START bit in register AES_CR must be set to begin encryption or decryption.
#define 	AT91C_AES_SMOD_AUTO                 (0x1 <<  8) // (AES) Auto Mode: no action in AES_CR is necessary (cf datasheet).
#define 	AT91C_AES_SMOD_PDC                  (0x2 <<  8) // (AES) PDC Mode (cf datasheet).
#define AT91C_AES_OPMOD       (0x7 << 12) // (AES) Operation Mode
#define 	AT91C_AES_OPMOD_ECB                  (0x0 << 12) // (AES) ECB Electronic CodeBook mode.
#define 	AT91C_AES_OPMOD_CBC                  (0x1 << 12) // (AES) CBC Cipher Block Chaining mode.
#define 	AT91C_AES_OPMOD_OFB                  (0x2 << 12) // (AES) OFB Output Feedback mode.
#define 	AT91C_AES_OPMOD_CFB                  (0x3 << 12) // (AES) CFB Cipher Feedback mode.
#define 	AT91C_AES_OPMOD_CTR                  (0x4 << 12) // (AES) CTR Counter mode.
#define AT91C_AES_LOD         (0x1 << 15) // (AES) Last Output Data Mode
#define AT91C_AES_CFBS        (0x7 << 16) // (AES) Cipher Feedback Data Size
#define 	AT91C_AES_CFBS_128_BIT              (0x0 << 16) // (AES) 128-bit.
#define 	AT91C_AES_CFBS_64_BIT               (0x1 << 16) // (AES) 64-bit.
#define 	AT91C_AES_CFBS_32_BIT               (0x2 << 16) // (AES) 32-bit.
#define 	AT91C_AES_CFBS_16_BIT               (0x3 << 16) // (AES) 16-bit.
#define 	AT91C_AES_CFBS_8_BIT                (0x4 << 16) // (AES) 8-bit.
#define AT91C_AES_CKEY        (0xF << 20) // (AES) Countermeasure Key
#define AT91C_AES_CTYPE       (0x1F << 24) // (AES) Countermeasure Type
#define 	AT91C_AES_CTYPE_TYPE1_EN             (0x1 << 24) // (AES) Countermeasure type 1 is enabled.
#define 	AT91C_AES_CTYPE_TYPE2_EN             (0x2 << 24) // (AES) Countermeasure type 2 is enabled.
#define 	AT91C_AES_CTYPE_TYPE3_EN             (0x4 << 24) // (AES) Countermeasure type 3 is enabled.
#define 	AT91C_AES_CTYPE_TYPE4_EN             (0x8 << 24) // (AES) Countermeasure type 4 is enabled.
#define 	AT91C_AES_CTYPE_TYPE5_EN             (0x10 << 24) // (AES) Countermeasure type 5 is enabled.
// -------- AES_IER : (AES Offset: 0x10) Interrupt Enable Register -------- 
#define AT91C_AES_DATRDY      (0x1 <<  0) // (AES) DATRDY
#define AT91C_AES_ENDRX       (0x1 <<  1) // (AES) PDC Read Buffer End
#define AT91C_AES_ENDTX       (0x1 <<  2) // (AES) PDC Write Buffer End
#define AT91C_AES_RXBUFF      (0x1 <<  3) // (AES) PDC Read Buffer Full
#define AT91C_AES_TXBUFE      (0x1 <<  4) // (AES) PDC Write Buffer Empty
#define AT91C_AES_URAD        (0x1 <<  8) // (AES) Unspecified Register Access Detection
// -------- AES_IDR : (AES Offset: 0x14) Interrupt Disable Register -------- 
// -------- AES_IMR : (AES Offset: 0x18) Interrupt Mask Register -------- 
// -------- AES_ISR : (AES Offset: 0x1c) Interrupt Status Register -------- 
#define AT91C_AES_URAT        (0x7 << 12) // (AES) Unspecified Register Access Type Status
#define 	AT91C_AES_URAT_IN_DAT_WRITE_DATPROC (0x0 << 12) // (AES) Input data register written during the data processing in PDC mode.
#define 	AT91C_AES_URAT_OUT_DAT_READ_DATPROC (0x1 << 12) // (AES) Output data register read during the data processing.
#define 	AT91C_AES_URAT_MODEREG_WRITE_DATPROC (0x2 << 12) // (AES) Mode register written during the data processing.
#define 	AT91C_AES_URAT_OUT_DAT_READ_SUBKEY  (0x3 << 12) // (AES) Output data register read during the sub-keys generation.
#define 	AT91C_AES_URAT_MODEREG_WRITE_SUBKEY (0x4 << 12) // (AES) Mode register written during the sub-keys generation.
#define 	AT91C_AES_URAT_WO_REG_READ          (0x5 << 12) // (AES) Write-only register read access.

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Error Correction Code controller
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_ECC {
	AT91_REG	 ECC_CR; 	//  ECC reset register
	AT91_REG	 ECC_MR; 	//  ECC Page size register
	AT91_REG	 ECC_SR; 	//  ECC Status register
	AT91_REG	 ECC_PR; 	//  ECC Parity register
	AT91_REG	 ECC_NPR; 	//  ECC Parity N register
	AT91_REG	 Reserved0[58]; 	// 
	AT91_REG	 ECC_VR; 	//  ECC Version register
} AT91S_ECC, *AT91PS_ECC;
#else
#define ECC_CR          (AT91_CAST(AT91_REG *) 	0x00000000) // (ECC_CR)  ECC reset register
#define ECC_MR          (AT91_CAST(AT91_REG *) 	0x00000004) // (ECC_MR)  ECC Page size register
#define ECC_SR          (AT91_CAST(AT91_REG *) 	0x00000008) // (ECC_SR)  ECC Status register
#define ECC_PR          (AT91_CAST(AT91_REG *) 	0x0000000C) // (ECC_PR)  ECC Parity register
#define ECC_NPR         (AT91_CAST(AT91_REG *) 	0x00000010) // (ECC_NPR)  ECC Parity N register
#define ECC_VR          (AT91_CAST(AT91_REG *) 	0x000000FC) // (ECC_VR)  ECC Version register

#endif
// -------- ECC_CR : (ECC Offset: 0x0) ECC reset register -------- 
#define AT91C_ECC_RST         (0x1 <<  0) // (ECC) ECC reset parity
// -------- ECC_MR : (ECC Offset: 0x4) ECC page size register -------- 
#define AT91C_ECC_PAGE_SIZE   (0x3 <<  0) // (ECC) Nand Flash page size
// -------- ECC_SR : (ECC Offset: 0x8) ECC status register -------- 
#define AT91C_ECC_RECERR      (0x1 <<  0) // (ECC) ECC error
#define AT91C_ECC_ECCERR      (0x1 <<  1) // (ECC) ECC single error
#define AT91C_ECC_MULERR      (0x1 <<  2) // (ECC) ECC_MULERR
// -------- ECC_PR : (ECC Offset: 0xc) ECC parity register -------- 
#define AT91C_ECC_BITADDR     (0xF <<  0) // (ECC) Bit address error
#define AT91C_ECC_WORDADDR    (0xFFF <<  4) // (ECC) address of the failing bit
// -------- ECC_NPR : (ECC Offset: 0x10) ECC N parity register -------- 
#define AT91C_ECC_NPARITY     (0xFFFF <<  0) // (ECC) ECC parity N 
// -------- ECC_VR : (ECC Offset: 0xfc) ECC version register -------- 
#define AT91C_ECC_VR          (0xF <<  0) // (ECC) ECC version register

// *****************************************************************************
//              SOFTWARE API DEFINITION  FOR Image Sensor Interface
// *****************************************************************************
#ifndef __ASSEMBLY__
typedef struct _AT91S_ISI {
	AT91_REG	 ISI_CR1; 	// Control Register 1
	AT91_REG	 ISI_CR2; 	// Control Register 2
	AT91_REG	 ISI_SR; 	// Status Register
	AT91_REG	 ISI_IER; 	// Interrupt Enable Register
	AT91_REG	 ISI_IDR; 	// Interrupt Disable Register
	AT91_REG	 ISI_IMR; 	// Interrupt Mask Register
	AT91_REG	 Reserved0[2]; 	// 
	AT91_REG	 ISI_PSIZE; 	// Preview Size Register
	AT91_REG	 ISI_PDECF; 	// Preview Decimation Factor Register
	AT91_REG	 ISI_PPFBD; 	// Preview Frame Buffer Address Register
	AT91_REG	 ISI_CDBA; 	// Codec Dma Address Register
	AT91_REG	 ISI_Y2RSET0; 	// Color Space Conversion Register
	AT91_REG	 ISI_Y2RSET1; 	// Color Space Conversion Register
	AT91_REG	 ISI_R2YSET0; 	// Color Space Conversion Register
	AT91_REG	 ISI_R2YSET1; 	// Color Space Conversion Register
	AT91_REG	 ISI_R2YSET2; 	// Color Space Conversion Register
} AT91S_ISI, *AT91PS_ISI;
#else
#define ISI_CR1         (AT91_CAST(AT91_REG *) 	0x00000000) // (ISI_CR1) Control Register 1
#define ISI_CR2         (AT91_CAST(AT91_REG *) 	0x00000004) // (ISI_CR2) Control Register 2
#define ISI_SR          (AT91_CAST(AT91_REG *) 	0x00000008) // (ISI_SR) Status Register
#define ISI_IER         (AT91_CAST(AT91_REG *) 	0x0000000C) // (ISI_IER) Interrupt Enable Register
#define ISI_IDR         (AT91_CAST(AT91_REG *) 	0x00000010) // (ISI_IDR) Interrupt Disable Register
#define ISI_IMR         (AT91_CAST(AT91_REG *) 	0x00000014) // (ISI_IMR) Interrupt Mask Register
#define ISI_PSIZE       (AT91_CAST(AT91_REG *) 	0x00000020) // (ISI_PSIZE) Preview Size Register
#define ISI_PDECF       (AT91_CAST(AT91_REG *) 	0x00000024) // (ISI_PDECF) Preview Decimation Factor Register
#define ISI_PPFBD       (AT91_CAST(AT91_REG *) 	0x00000028) // (ISI_PPFBD) Preview Frame Buffer Address Register
#define ISI_CDBA        (AT91_CAST(AT91_REG *) 	0x0000002C) // (ISI_CDBA) Codec Dma Address Register
#define ISI_Y2RSET0     (AT91_CAST(AT91_REG *) 	0x00000030) // (ISI_Y2RSET0) Color Space Conversion Register
#define ISI_Y2RSET1     (AT91_CAST(AT91_REG *) 	0x00000034) // (ISI_Y2RSET1) Color Space Conversion Register
#define ISI_R2YSET0     (AT91_CAST(AT91_REG *) 	0x00000038) // (ISI_R2YSET0) Color Space Conversion Register
#define ISI_R2YSET1     (AT91_CAST(AT91_REG *) 	0x0000003C) // (ISI_R2YSET1) Color Space Conversion Register
#define ISI_R2YSET2     (AT91_CAST(AT91_REG *) 	0x00000040) // (ISI_R2YSET2) Color Space Conversion Register

#endif
// -------- ISI_CR1 : (ISI Offset: 0x0) ISI Control Register 1 -------- 
#define AT91C_ISI_RST         (0x1 <<  0) // (ISI) Image sensor interface reset
#define AT91C_ISI_DISABLE     (0x1 <<  1) // (ISI) image sensor disable.
#define AT91C_ISI_HSYNC_POL   (0x1 <<  2) // (ISI) Horizontal synchronization polarity
#define 	AT91C_ISI_HSYNC_POL_ACTIVE_HIGH          (0x0 <<  2) // (ISI) HSYNC active high.
#define 	AT91C_ISI_HSYNC_POL_ACTIVE_LOW           (0x1 <<  2) // (ISI) HSYNC active low.
#define AT91C_ISI_VSYNC_POL   (0x1 <<  3) // (ISI) Vertical synchronization polarity
#define 	AT91C_ISI_VSYNC_POL_ACTIVE_HIGH          (0x0 <<  3) // (ISI) VSYNC active high.
#define 	AT91C_ISI_VSYNC_POL_ACTIVE_LOW           (0x1 <<  3) // (ISI) VSYNC active low.
#define AT91C_ISI_PIXCLK_POL  (0x1 <<  4) // (ISI) Pixel Clock Polarity
#define 	AT91C_ISI_PIXCLK_POL_RISING_EDGE          (0x0 <<  4) // (ISI) Data is sampled on rising edge of pixel clock.
#define 	AT91C_ISI_PIXCLK_POL_FALLING_EDGE         (0x1 <<  4) // (ISI) Data is sampled on falling edge of pixel clock.
#define AT91C_ISI_EMB_SYNC    (0x1 <<  6) // (ISI) Embedded synchronisation
#define 	AT91C_ISI_EMB_SYNC_HSYNC_VSYNC          (0x0 <<  6) // (ISI) Synchronization by HSYNC, VSYNC.
#define 	AT91C_ISI_EMB_SYNC_SAV_EAV              (0x1 <<  6) // (ISI) Synchronisation by Embedded Synchronization Sequence SAV/EAV.
#define AT91C_ISI_CRC_SYNC    (0x1 <<  7) // (ISI) CRC correction
#define 	AT91C_ISI_CRC_SYNC_CORRECTION_OFF       (0x0 <<  7) // (ISI) No CRC correction performed on embedded synchronization.
#define 	AT91C_ISI_CRC_SYNC_CORRECTION_ON        (0x1 <<  7) // (ISI) CRC correction is performed.
#define AT91C_ISI_FRATE       (0x7 <<  8) // (ISI) Frame rate capture
#define AT91C_ISI_FULL        (0x1 << 12) // (ISI) Full mode is allowed
#define 	AT91C_ISI_FULL_MODE_DISABLE         (0x0 << 12) // (ISI) Full mode disabled.
#define 	AT91C_ISI_FULL_MODE_ENABLE          (0x1 << 12) // (ISI) both codec and preview datapath are working simultaneously.
#define AT91C_ISI_THMASK      (0x3 << 13) // (ISI) DMA Burst Mask
#define 	AT91C_ISI_THMASK_4_8_16_BURST         (0x0 << 13) // (ISI) 4,8 and 16 AHB burst are allowed
#define 	AT91C_ISI_THMASK_8_16_BURST           (0x1 << 13) // (ISI) 8 and 16 AHB burst are allowed
#define 	AT91C_ISI_THMASK_16_BURST             (0x2 << 13) // (ISI) Only 16 AHB burst are allowed
#define AT91C_ISI_CODEC_ON    (0x1 << 15) // (ISI) Enable the codec path
#define AT91C_ISI_SLD         (0xFF << 16) // (ISI) Start of Line Delay
#define AT91C_ISI_SFD         (0xFF << 24) // (ISI) Start of frame Delay
// -------- ISI_CR2 : (ISI Offset: 0x4) ISI Control Register 2 -------- 
#define AT91C_ISI_IM_VSIZE    (0x7FF <<  0) // (ISI) Vertical size of the Image sensor [0..2047]
#define AT91C_ISI_GS_MODE     (0x1 << 11) // (ISI) Grayscale Memory Mode
#define 	AT91C_ISI_GS_MODE_2_PIXELS             (0x0 << 11) // (ISI) 2 pixels per word.
#define 	AT91C_ISI_GS_MODE_1_PIXEL              (0x1 << 11) // (ISI) 1 pixel per word.
#define AT91C_ISI_RGB_MODE    (0x1 << 12) // (ISI) RGB mode
#define 	AT91C_ISI_RGB_MODE_RGB_888              (0x0 << 12) // (ISI) RGB 8:8:8 24 bits
#define 	AT91C_ISI_RGB_MODE_RGB_565              (0x1 << 12) // (ISI) RGB 5:6:5 16 bits
#define AT91C_ISI_GRAYSCALE   (0x1 << 13) // (ISI) Grayscale Mode
#define 	AT91C_ISI_GRAYSCALE_DISABLE              (0x0 << 13) // (ISI) Grayscale mode is disabled
#define 	AT91C_ISI_GRAYSCALE_ENABLE               (0x1 << 13) // (ISI) Input image is assumed to be grayscale coded
#define AT91C_ISI_RGB_SWAP    (0x1 << 14) // (ISI) RGB Swap
#define 	AT91C_ISI_RGB_SWAP_DISABLE              (0x0 << 14) // (ISI) D7 -> R7
#define 	AT91C_ISI_RGB_SWAP_ENABLE               (0x1 << 14) // (ISI) D0 -> R7
#define AT91C_ISI_COL_SPACE   (0x1 << 15) // (ISI) Color space for the image data
#define 	AT91C_ISI_COL_SPACE_YCBCR                (0x0 << 15) // (ISI) YCbCr
#define 	AT91C_ISI_COL_SPACE_RGB                  (0x1 << 15) // (ISI) RGB
#define AT91C_ISI_IM_HSIZE    (0x7FF << 16) // (ISI) Horizontal size of the Image sensor [0..2047]
#define AT91C_ISI_YCC_SWAP    (0x3 << 28) // (ISI) Ycc swap
#define 	AT91C_ISI_YCC_SWAP_YCC_DEFAULT          (0x0 << 28) // (ISI) Cb(i) Y(i) Cr(i) Y(i+1)
#define 	AT91C_ISI_YCC_SWAP_YCC_MODE1            (0x1 << 28) // (ISI) Cr(i) Y(i) Cb(i) Y(i+1)
#define 	AT91C_ISI_YCC_SWAP_YCC_MODE2            (0x2 << 28) // (ISI) Y(i) Cb(i) Y(i+1) Cr(i)
#define 	AT91C_ISI_YCC_SWAP_YCC_MODE3            (0x3 << 28) // (ISI) Y(i) Cr(i) Y(i+1) Cb(i)
#define AT91C_ISI_RGB_CFG     (0x3 << 30) // (ISI) RGB configuration
#define 	AT91C_ISI_RGB_CFG_RGB_DEFAULT          (0x0 << 30) // (ISI) R/G(MSB)  G(LSB)/B  R/G(MSB)  G(LSB)/B
#define 	AT91C_ISI_RGB_CFG_RGB_MODE1            (0x1 << 30) // (ISI) B/G(MSB)  G(LSB)/R  B/G(MSB)  G(LSB)/R
#define 	AT91C_ISI_RGB_CFG_RGB_MODE2            (0x2 << 30) // (ISI) G(LSB)/R  B/G(MSB)  G(LSB)/R  B/G(MSB)
#define 	AT91C_ISI_RGB_CFG_RGB_MODE3            (0x3 << 30) // (ISI) G(LSB)/B  R/G(MSB)  G(LSB)/B  R/G(MSB)
// -------- ISI_SR : (ISI Offset: 0x8) ISI Status Register -------- 
#define AT91C_ISI_SOF         (0x1 <<  0) // (ISI) Start of Frame
#define AT91C_ISI_DIS         (0x1 <<  1) // (ISI) Image Sensor Interface disable
#define AT91C_ISI_SOFTRST     (0x1 <<  2) // (ISI) Software Reset
#define AT91C_ISI_CDC_PND     (0x1 <<  3) // (ISI) Codec request pending
#define AT91C_ISI_CRC_ERR     (0x1 <<  4) // (ISI) CRC synchronisation error
#define AT91C_ISI_FO_C_OVF    (0x1 <<  5) // (ISI) Fifo Codec Overflow 
#define AT91C_ISI_FO_P_OVF    (0x1 <<  6) // (ISI) Fifo Preview Overflow 
#define AT91C_ISI_FO_P_EMP    (0x1 <<  7) // (ISI) Fifo Preview Empty
#define AT91C_ISI_FO_C_EMP    (0x1 <<  8) // (ISI) Fifo Codec Empty
#define AT91C_ISI_FR_OVR      (0x1 <<  9) // (ISI) Frame rate overun
// -------- ISI_IER : (ISI Offset: 0xc) ISI Interrupt Enable Register -------- 
// -------- ISI_IDR : (ISI Offset: 0x10) ISI Interrupt Disable Register -------- 
// -------- ISI_IMR : (ISI Offset: 0x14) ISI Interrupt Mask Register -------- 
// -------- ISI_PSIZE : (ISI Offset: 0x20) ISI Preview Register -------- 
#define AT91C_ISI_PREV_VSIZE  (0x3FF <<  0) // (ISI) Vertical size for the preview path
#define AT91C_ISI_PREV_HSIZE  (0x3FF << 16) // (ISI) Horizontal size for the preview path
// -------- ISI_PDECF : (ISI Offset: 0x24) ISI Preview Decimation Factor Register -------- 
#define AT91C_ISI_DEC_FACTOR  (0xFF <<  0) // (ISI) Decimation factor
// -------- ISI_PPFBD : (ISI Offset: 0x28) ISI Preview Primary FBD Register -------- 
#define AT91C_ISI_PREV_FBD_ADDR (0x0 <<  0) // (ISI) Base address for preview frame buffer descriptor
// -------- ISI_CDBA : (ISI Offset: 0x2c) ISI Codec DMA Base Address Register -------- 
#define AT91C_ISI_CODEC_DMA_ADDR (0x0 <<  0) // (ISI) Base address for codec DMA
// -------- ISI_Y2RSET0 : (ISI Offset: 0x30) Color Space Conversion YCrCb to RGB Register -------- 
#define AT91C_ISI_Y2R_C0      (0xFF <<  0) // (ISI) Color Space Conversion Matrix Coefficient C0
#define AT91C_ISI_Y2R_C1      (0xFF <<  8) // (ISI) Color Space Conversion Matrix Coefficient C1
#define AT91C_ISI_Y2R_C2      (0xFF << 16) // (ISI) Color Space Conversion Matrix Coefficient C2
#define AT91C_ISI_Y2R_C3      (0xFF << 24) // (ISI) Color Space Conversion Matrix Coefficient C3
// -------- ISI_Y2RSET1 : (ISI Offset: 0x34) ISI Color Space Conversion YCrCb to RGB set 1 Register -------- 
#define AT91C_ISI_Y2R_C4      (0x1FF <<  0) // (ISI) Color Space Conversion Matrix Coefficient C4
#define AT91C_ISI_Y2R_YOFF    (0x1 << 12) // (ISI) Color Space Conversion Luninance default offset
#define 	AT91C_ISI_Y2R_YOFF_0                    (0x0 << 12) // (ISI) Offset is 0
#define 	AT91C_ISI_Y2R_YOFF_128                  (0x1 << 12) // (ISI) Offset is 128
#define AT91C_ISI_Y2R_CROFF   (0x1 << 13) // (ISI) Color Space Conversion Red Chrominance default offset
#define 	AT91C_ISI_Y2R_CROFF_0                    (0x0 << 13) // (ISI) Offset is 0
#define 	AT91C_ISI_Y2R_CROFF_16                   (0x1 << 13) // (ISI) Offset is 16
#define AT91C_ISI_Y2R_CBOFF   (0x1 << 14) // (ISI) Color Space Conversion Blue Chrominance default offset
#define 	AT91C_ISI_Y2R_CBOFF_0                    (0x0 << 14) // (ISI) Offset is 0
#define 	AT91C_ISI_Y2R_CBOFF_16                   (0x1 << 14) // (ISI) Offset is 16
// -------- ISI_R2YSET0 : (ISI Offset: 0x38) Color Space Conversion RGB to YCrCb set 0 register -------- 
#define AT91C_ISI_R2Y_C0      (0x7F <<  0) // (ISI) Color Space Conversion RGB to YCrCb Matrix coefficient C0
#define AT91C_ISI_R2Y_C1      (0x7F <<  8) // (ISI) Color Space Conversion RGB to YCrCb Matrix coefficient C1
#define AT91C_ISI_R2Y_C2      (0x7F << 16) // (ISI) Color Space Conversion RGB to YCrCb Matrix coefficient C2
#define AT91C_ISI_R2Y_ROFF    (0x1 << 24) // (ISI) Color Space Conversion Red component offset
#define 	AT91C_ISI_R2Y_ROFF_0                    (0x0 << 24) // (ISI) Offset is 0
#define 	AT91C_ISI_R2Y_ROFF_16                   (0x1 << 24) // (ISI) Offset is 16
// -------- ISI_R2YSET1 : (ISI Offset: 0x3c) Color Space Conversion RGB to YCrCb set 1 register -------- 
#define AT91C_ISI_R2Y_C3      (0x7F <<  0) // (ISI) Color Space Conversion RGB to YCrCb Matrix coefficient C3
#define AT91C_ISI_R2Y_C4      (0x7F <<  8) // (ISI) Color Space Conversion RGB to YCrCb Matrix coefficient C4
#define AT91C_ISI_R2Y_C5      (0x7F << 16) // (ISI) Color Space Conversion RGB to YCrCb Matrix coefficient C5
#define AT91C_ISI_R2Y_GOFF    (0x1 << 24) // (ISI) Color Space Conversion Green component offset
#define 	AT91C_ISI_R2Y_GOFF_0                    (0x0 << 24) // (ISI) Offset is 0
#define 	AT91C_ISI_R2Y_GOFF_128                  (0x1 << 24) // (ISI) Offset is 128
// -------- ISI_R2YSET2 : (ISI Offset: 0x40) Color Space Conversion RGB to YCrCb set 2 register -------- 
#define AT91C_ISI_R2Y_C6      (0x7F <<  0) // (ISI) Color Space Conversion RGB to YCrCb Matrix coefficient C6
#define AT91C_ISI_R2Y_C7      (0x7F <<  8) // (ISI) Color Space Conversion RGB to YCrCb Matrix coefficient C7
#define AT91C_ISI_R2Y_C8      (0x7F << 16) // (ISI) Color Space Conversion RGB to YCrCb Matrix coefficient C8
#define AT91C_ISI_R2Y_BOFF    (0x1 << 24) // (ISI) Color Space Conversion Blue component offset
#define 	AT91C_ISI_R2Y_BOFF_0                    (0x0 << 24) // (ISI) Offset is 0
#define 	AT91C_ISI_R2Y_BOFF_128                  (0x1 << 24) // (ISI) Offset is 128

// *****************************************************************************
//               REGISTER ADDRESS DEFINITION FOR AT91SAM9265
// *****************************************************************************
// ========== Register definition for SYS peripheral ========== 
#define AT91C_SYS_ECC1  (AT91_CAST(AT91_REG *) 	0xFFFFE600) // (SYS) ECC 0
#define AT91C_SYS_ECC0  (AT91_CAST(AT91_REG *) 	0xFFFFE000) // (SYS) ECC 0
#define AT91C_SYS_GPBR  (AT91_CAST(AT91_REG *) 	0xFFFFFD60) // (SYS) General Purpose Register
// ========== Register definition for EBI0 peripheral ========== 
#define AT91C_EBI0_DUMMY (AT91_CAST(AT91_REG *) 	0xFFFFE200) // (EBI0) Dummy register - Do not use
// ========== Register definition for SDRAMC0 peripheral ========== 
#define AT91C_SDRAMC0_MDR (AT91_CAST(AT91_REG *) 	0xFFFFE224) // (SDRAMC0) SDRAM Memory Device Register
#define AT91C_SDRAMC0_IDR (AT91_CAST(AT91_REG *) 	0xFFFFE218) // (SDRAMC0) SDRAM Controller Interrupt Disable Register
#define AT91C_SDRAMC0_IMR (AT91_CAST(AT91_REG *) 	0xFFFFE21C) // (SDRAMC0) SDRAM Controller Interrupt Mask Register
#define AT91C_SDRAMC0_ISR (AT91_CAST(AT91_REG *) 	0xFFFFE220) // (SDRAMC0) SDRAM Controller Interrupt Mask Register
#define AT91C_SDRAMC0_HSR (AT91_CAST(AT91_REG *) 	0xFFFFE20C) // (SDRAMC0) SDRAM Controller High Speed Register
#define AT91C_SDRAMC0_TR (AT91_CAST(AT91_REG *) 	0xFFFFE204) // (SDRAMC0) SDRAM Controller Refresh Timer Register
#define AT91C_SDRAMC0_CR (AT91_CAST(AT91_REG *) 	0xFFFFE208) // (SDRAMC0) SDRAM Controller Configuration Register
#define AT91C_SDRAMC0_MR (AT91_CAST(AT91_REG *) 	0xFFFFE200) // (SDRAMC0) SDRAM Controller Mode Register
#define AT91C_SDRAMC0_LPR (AT91_CAST(AT91_REG *) 	0xFFFFE210) // (SDRAMC0) SDRAM Controller Low Power Register
#define AT91C_SDRAMC0_IER (AT91_CAST(AT91_REG *) 	0xFFFFE214) // (SDRAMC0) SDRAM Controller Interrupt Enable Register
// ========== Register definition for SMC0 peripheral ========== 
#define AT91C_SMC0_CYCLE6 (AT91_CAST(AT91_REG *) 	0xFFFFE468) // (SMC0)  Cycle Register for CS 6
#define AT91C_SMC0_SETUP6 (AT91_CAST(AT91_REG *) 	0xFFFFE460) // (SMC0)  Setup Register for CS 6
#define AT91C_SMC0_PULSE3 (AT91_CAST(AT91_REG *) 	0xFFFFE434) // (SMC0)  Pulse Register for CS 3
#define AT91C_SMC0_CYCLE1 (AT91_CAST(AT91_REG *) 	0xFFFFE418) // (SMC0)  Cycle Register for CS 1
#define AT91C_SMC0_SETUP5 (AT91_CAST(AT91_REG *) 	0xFFFFE450) // (SMC0)  Setup Register for CS 5
#define AT91C_SMC0_CYCLE7 (AT91_CAST(AT91_REG *) 	0xFFFFE478) // (SMC0)  Cycle Register for CS 7
#define AT91C_SMC0_PULSE0 (AT91_CAST(AT91_REG *) 	0xFFFFE404) // (SMC0)  Pulse Register for CS 0
#define AT91C_SMC0_CYCLE5 (AT91_CAST(AT91_REG *) 	0xFFFFE458) // (SMC0)  Cycle Register for CS 5
#define AT91C_SMC0_CTRL0 (AT91_CAST(AT91_REG *) 	0xFFFFE40C) // (SMC0)  Control Register for CS 0
#define AT91C_SMC0_SETUP7 (AT91_CAST(AT91_REG *) 	0xFFFFE470) // (SMC0)  Setup Register for CS 7
#define AT91C_SMC0_CTRL4 (AT91_CAST(AT91_REG *) 	0xFFFFE44C) // (SMC0)  Control Register for CS 4
#define AT91C_SMC0_CTRL1 (AT91_CAST(AT91_REG *) 	0xFFFFE41C) // (SMC0)  Control Register for CS 1
#define AT91C_SMC0_CYCLE2 (AT91_CAST(AT91_REG *) 	0xFFFFE428) // (SMC0)  Cycle Register for CS 2
#define AT91C_SMC0_PULSE7 (AT91_CAST(AT91_REG *) 	0xFFFFE474) // (SMC0)  Pulse Register for CS 7
#define AT91C_SMC0_PULSE6 (AT91_CAST(AT91_REG *) 	0xFFFFE464) // (SMC0)  Pulse Register for CS 6
#define AT91C_SMC0_CYCLE4 (AT91_CAST(AT91_REG *) 	0xFFFFE448) // (SMC0)  Cycle Register for CS 4
#define AT91C_SMC0_CYCLE0 (AT91_CAST(AT91_REG *) 	0xFFFFE408) // (SMC0)  Cycle Register for CS 0
#define AT91C_SMC0_CTRL6 (AT91_CAST(AT91_REG *) 	0xFFFFE46C) // (SMC0)  Control Register for CS 6
#define AT91C_SMC0_CTRL5 (AT91_CAST(AT91_REG *) 	0xFFFFE45C) // (SMC0)  Control Register for CS 5
#define AT91C_SMC0_SETUP0 (AT91_CAST(AT91_REG *) 	0xFFFFE400) // (SMC0)  Setup Register for CS 0
#define AT91C_SMC0_SETUP4 (AT91_CAST(AT91_REG *) 	0xFFFFE440) // (SMC0)  Setup Register for CS 4
#define AT91C_SMC0_PULSE1 (AT91_CAST(AT91_REG *) 	0xFFFFE414) // (SMC0)  Pulse Register for CS 1
#define AT91C_SMC0_CTRL2 (AT91_CAST(AT91_REG *) 	0xFFFFE42C) // (SMC0)  Control Register for CS 2
#define AT91C_SMC0_SETUP2 (AT91_CAST(AT91_REG *) 	0xFFFFE420) // (SMC0)  Setup Register for CS 2
#define AT91C_SMC0_CTRL3 (AT91_CAST(AT91_REG *) 	0xFFFFE43C) // (SMC0)  Control Register for CS 3
#define AT91C_SMC0_SETUP3 (AT91_CAST(AT91_REG *) 	0xFFFFE430) // (SMC0)  Setup Register for CS 3
#define AT91C_SMC0_CTRL7 (AT91_CAST(AT91_REG *) 	0xFFFFE47C) // (SMC0)  Control Register for CS 7
#define AT91C_SMC0_PULSE5 (AT91_CAST(AT91_REG *) 	0xFFFFE454) // (SMC0)  Pulse Register for CS 5
#define AT91C_SMC0_PULSE4 (AT91_CAST(AT91_REG *) 	0xFFFFE444) // (SMC0)  Pulse Register for CS 4
#define AT91C_SMC0_PULSE2 (AT91_CAST(AT91_REG *) 	0xFFFFE424) // (SMC0)  Pulse Register for CS 2
#define AT91C_SMC0_CYCLE3 (AT91_CAST(AT91_REG *) 	0xFFFFE438) // (SMC0)  Cycle Register for CS 3
#define AT91C_SMC0_SETUP1 (AT91_CAST(AT91_REG *) 	0xFFFFE410) // (SMC0)  Setup Register for CS 1
// ========== Register definition for EBI1 peripheral ========== 
#define AT91C_EBI1_DUMMY (AT91_CAST(AT91_REG *) 	0xFFFFE800) // (EBI1) Dummy register - Do not use
// ========== Register definition for SDRAMC1 peripheral ========== 
#define AT91C_SDRAMC1_IMR (AT91_CAST(AT91_REG *) 	0xFFFFE81C) // (SDRAMC1) SDRAM Controller Interrupt Mask Register
#define AT91C_SDRAMC1_LPR (AT91_CAST(AT91_REG *) 	0xFFFFE810) // (SDRAMC1) SDRAM Controller Low Power Register
#define AT91C_SDRAMC1_CR (AT91_CAST(AT91_REG *) 	0xFFFFE808) // (SDRAMC1) SDRAM Controller Configuration Register
#define AT91C_SDRAMC1_HSR (AT91_CAST(AT91_REG *) 	0xFFFFE80C) // (SDRAMC1) SDRAM Controller High Speed Register
#define AT91C_SDRAMC1_MDR (AT91_CAST(AT91_REG *) 	0xFFFFE824) // (SDRAMC1) SDRAM Memory Device Register
#define AT91C_SDRAMC1_MR (AT91_CAST(AT91_REG *) 	0xFFFFE800) // (SDRAMC1) SDRAM Controller Mode Register
#define AT91C_SDRAMC1_ISR (AT91_CAST(AT91_REG *) 	0xFFFFE820) // (SDRAMC1) SDRAM Controller Interrupt Mask Register
#define AT91C_SDRAMC1_IDR (AT91_CAST(AT91_REG *) 	0xFFFFE818) // (SDRAMC1) SDRAM Controller Interrupt Disable Register
#define AT91C_SDRAMC1_IER (AT91_CAST(AT91_REG *) 	0xFFFFE814) // (SDRAMC1) SDRAM Controller Interrupt Enable Register
#define AT91C_SDRAMC1_TR (AT91_CAST(AT91_REG *) 	0xFFFFE804) // (SDRAMC1) SDRAM Controller Refresh Timer Register
// ========== Register definition for SMC1 peripheral ========== 
#define AT91C_SMC1_PULSE4 (AT91_CAST(AT91_REG *) 	0xFFFFEA44) // (SMC1)  Pulse Register for CS 4
#define AT91C_SMC1_SETUP2 (AT91_CAST(AT91_REG *) 	0xFFFFEA20) // (SMC1)  Setup Register for CS 2
#define AT91C_SMC1_CYCLE0 (AT91_CAST(AT91_REG *) 	0xFFFFEA08) // (SMC1)  Cycle Register for CS 0
#define AT91C_SMC1_SETUP7 (AT91_CAST(AT91_REG *) 	0xFFFFEA70) // (SMC1)  Setup Register for CS 7
#define AT91C_SMC1_PULSE7 (AT91_CAST(AT91_REG *) 	0xFFFFEA74) // (SMC1)  Pulse Register for CS 7
#define AT91C_SMC1_CTRL0 (AT91_CAST(AT91_REG *) 	0xFFFFEA0C) // (SMC1)  Control Register for CS 0
#define AT91C_SMC1_SETUP3 (AT91_CAST(AT91_REG *) 	0xFFFFEA30) // (SMC1)  Setup Register for CS 3
#define AT91C_SMC1_SETUP4 (AT91_CAST(AT91_REG *) 	0xFFFFEA40) // (SMC1)  Setup Register for CS 4
#define AT91C_SMC1_CYCLE6 (AT91_CAST(AT91_REG *) 	0xFFFFEA68) // (SMC1)  Cycle Register for CS 6
#define AT91C_SMC1_CTRL1 (AT91_CAST(AT91_REG *) 	0xFFFFEA1C) // (SMC1)  Control Register for CS 1
#define AT91C_SMC1_CYCLE3 (AT91_CAST(AT91_REG *) 	0xFFFFEA38) // (SMC1)  Cycle Register for CS 3
#define AT91C_SMC1_CTRL5 (AT91_CAST(AT91_REG *) 	0xFFFFEA5C) // (SMC1)  Control Register for CS 5
#define AT91C_SMC1_CTRL3 (AT91_CAST(AT91_REG *) 	0xFFFFEA3C) // (SMC1)  Control Register for CS 3
#define AT91C_SMC1_CYCLE4 (AT91_CAST(AT91_REG *) 	0xFFFFEA48) // (SMC1)  Cycle Register for CS 4
#define AT91C_SMC1_SETUP6 (AT91_CAST(AT91_REG *) 	0xFFFFEA60) // (SMC1)  Setup Register for CS 6
#define AT91C_SMC1_PULSE3 (AT91_CAST(AT91_REG *) 	0xFFFFEA34) // (SMC1)  Pulse Register for CS 3
#define AT91C_SMC1_CTRL7 (AT91_CAST(AT91_REG *) 	0xFFFFEA7C) // (SMC1)  Control Register for CS 7
#define AT91C_SMC1_SETUP1 (AT91_CAST(AT91_REG *) 	0xFFFFEA10) // (SMC1)  Setup Register for CS 1
#define AT91C_SMC1_PULSE5 (AT91_CAST(AT91_REG *) 	0xFFFFEA54) // (SMC1)  Pulse Register for CS 5
#define AT91C_SMC1_PULSE0 (AT91_CAST(AT91_REG *) 	0xFFFFEA04) // (SMC1)  Pulse Register for CS 0
#define AT91C_SMC1_CYCLE5 (AT91_CAST(AT91_REG *) 	0xFFFFEA58) // (SMC1)  Cycle Register for CS 5
#define AT91C_SMC1_PULSE6 (AT91_CAST(AT91_REG *) 	0xFFFFEA64) // (SMC1)  Pulse Register for CS 6
#define AT91C_SMC1_SETUP5 (AT91_CAST(AT91_REG *) 	0xFFFFEA50) // (SMC1)  Setup Register for CS 5
#define AT91C_SMC1_CTRL6 (AT91_CAST(AT91_REG *) 	0xFFFFEA6C) // (SMC1)  Control Register for CS 6
#define AT91C_SMC1_CTRL2 (AT91_CAST(AT91_REG *) 	0xFFFFEA2C) // (SMC1)  Control Register for CS 2
#define AT91C_SMC1_SETUP0 (AT91_CAST(AT91_REG *) 	0xFFFFEA00) // (SMC1)  Setup Register for CS 0
#define AT91C_SMC1_CYCLE7 (AT91_CAST(AT91_REG *) 	0xFFFFEA78) // (SMC1)  Cycle Register for CS 7
#define AT91C_SMC1_CYCLE1 (AT91_CAST(AT91_REG *) 	0xFFFFEA18) // (SMC1)  Cycle Register for CS 1
#define AT91C_SMC1_PULSE2 (AT91_CAST(AT91_REG *) 	0xFFFFEA24) // (SMC1)  Pulse Register for CS 2
#define AT91C_SMC1_PULSE1 (AT91_CAST(AT91_REG *) 	0xFFFFEA14) // (SMC1)  Pulse Register for CS 1
#define AT91C_SMC1_CYCLE2 (AT91_CAST(AT91_REG *) 	0xFFFFEA28) // (SMC1)  Cycle Register for CS 2
#define AT91C_SMC1_CTRL4 (AT91_CAST(AT91_REG *) 	0xFFFFEA4C) // (SMC1)  Control Register for CS 4
// ========== Register definition for MATRIX peripheral ========== 
#define AT91C_MATRIX_MCFG7 (AT91_CAST(AT91_REG *) 	0xFFFFEC1C) // (MATRIX)  Master Configuration Register 7 
#define AT91C_MATRIX_MRCR (AT91_CAST(AT91_REG *) 	0xFFFFED00) // (MATRIX)  Master Remp Control Register 
#define AT91C_MATRIX_PRBS5 (AT91_CAST(AT91_REG *) 	0xFFFFECAC) // (MATRIX)  PRBS5
#define AT91C_MATRIX_SCFG6 (AT91_CAST(AT91_REG *) 	0xFFFFEC58) // (MATRIX)  Slave Configuration Register 6
#define AT91C_MATRIX_MCFG3 (AT91_CAST(AT91_REG *) 	0xFFFFEC0C) // (MATRIX)  Master Configuration Register 3 
#define AT91C_MATRIX_SCFG5 (AT91_CAST(AT91_REG *) 	0xFFFFEC54) // (MATRIX)  Slave Configuration Register 5
#define AT91C_MATRIX_MCFG1 (AT91_CAST(AT91_REG *) 	0xFFFFEC04) // (MATRIX)  Master Configuration Register 1 
#define AT91C_MATRIX_SCFG3 (AT91_CAST(AT91_REG *) 	0xFFFFEC4C) // (MATRIX)  Slave Configuration Register 3
#define AT91C_MATRIX_MCFG4 (AT91_CAST(AT91_REG *) 	0xFFFFEC10) // (MATRIX)  Master Configuration Register 4 
#define AT91C_MATRIX_MCFG2 (AT91_CAST(AT91_REG *) 	0xFFFFEC08) // (MATRIX)  Master Configuration Register 2 
#define AT91C_MATRIX_PRBS6 (AT91_CAST(AT91_REG *) 	0xFFFFECB4) // (MATRIX)  PRBS6
#define AT91C_MATRIX_SCFG4 (AT91_CAST(AT91_REG *) 	0xFFFFEC50) // (MATRIX)  Slave Configuration Register 4
#define AT91C_MATRIX_MCFG8 (AT91_CAST(AT91_REG *) 	0xFFFFEC20) // (MATRIX)  Master Configuration Register 8 
#define AT91C_MATRIX_PRAS3 (AT91_CAST(AT91_REG *) 	0xFFFFEC98) // (MATRIX)  PRAS3
#define AT91C_MATRIX_PRAS4 (AT91_CAST(AT91_REG *) 	0xFFFFECA0) // (MATRIX)  PRAS4
#define AT91C_MATRIX_PRAS1 (AT91_CAST(AT91_REG *) 	0xFFFFEC88) // (MATRIX)  PRAS1
#define AT91C_MATRIX_PRAS0 (AT91_CAST(AT91_REG *) 	0xFFFFEC80) // (MATRIX)  PRAS0
#define AT91C_MATRIX_SCFG0 (AT91_CAST(AT91_REG *) 	0xFFFFEC40) // (MATRIX)  Slave Configuration Register 0
#define AT91C_MATRIX_PRBS7 (AT91_CAST(AT91_REG *) 	0xFFFFECBC) // (MATRIX)  PRBS7
#define AT91C_MATRIX_PRBS4 (AT91_CAST(AT91_REG *) 	0xFFFFECA4) // (MATRIX)  PRBS4
#define AT91C_MATRIX_PRBS2 (AT91_CAST(AT91_REG *) 	0xFFFFEC94) // (MATRIX)  PRBS2
#define AT91C_MATRIX_MCFG5 (AT91_CAST(AT91_REG *) 	0xFFFFEC14) // (MATRIX)  Master Configuration Register 5 
#define AT91C_MATRIX_SCFG7 (AT91_CAST(AT91_REG *) 	0xFFFFEC5C) // (MATRIX)  Slave Configuration Register 7
#define AT91C_MATRIX_PRBS1 (AT91_CAST(AT91_REG *) 	0xFFFFEC8C) // (MATRIX)  PRBS1
#define AT91C_MATRIX_MCFG6 (AT91_CAST(AT91_REG *) 	0xFFFFEC18) // (MATRIX)  Master Configuration Register 6 
#define AT91C_MATRIX_PRBS0 (AT91_CAST(AT91_REG *) 	0xFFFFEC84) // (MATRIX)  PRBS0
#define AT91C_MATRIX_MCFG0 (AT91_CAST(AT91_REG *) 	0xFFFFEC00) // (MATRIX)  Master Configuration Register 0 
#define AT91C_MATRIX_PRAS5 (AT91_CAST(AT91_REG *) 	0xFFFFECA8) // (MATRIX)  PRAS5
#define AT91C_MATRIX_SCFG1 (AT91_CAST(AT91_REG *) 	0xFFFFEC44) // (MATRIX)  Slave Configuration Register 1
#define AT91C_MATRIX_PRAS7 (AT91_CAST(AT91_REG *) 	0xFFFFECB8) // (MATRIX)  PRAS7
#define AT91C_MATRIX_PRAS2 (AT91_CAST(AT91_REG *) 	0xFFFFEC90) // (MATRIX)  PRAS2
#define AT91C_MATRIX_PRAS6 (AT91_CAST(AT91_REG *) 	0xFFFFECB0) // (MATRIX)  PRAS6
#define AT91C_MATRIX_SCFG2 (AT91_CAST(AT91_REG *) 	0xFFFFEC48) // (MATRIX)  Slave Configuration Register 2
#define AT91C_MATRIX_PRBS3 (AT91_CAST(AT91_REG *) 	0xFFFFEC9C) // (MATRIX)  PRBS3
// ========== Register definition for PDC_DBGU peripheral ========== 
#define AT91C_DBGU_PTCR (AT91_CAST(AT91_REG *) 	0xFFFFEF20) // (PDC_DBGU) PDC Transfer Control Register
#define AT91C_DBGU_RCR  (AT91_CAST(AT91_REG *) 	0xFFFFEF04) // (PDC_DBGU) Receive Counter Register
#define AT91C_DBGU_TCR  (AT91_CAST(AT91_REG *) 	0xFFFFEF0C) // (PDC_DBGU) Transmit Counter Register
#define AT91C_DBGU_RNCR (AT91_CAST(AT91_REG *) 	0xFFFFEF14) // (PDC_DBGU) Receive Next Counter Register
#define AT91C_DBGU_TNPR (AT91_CAST(AT91_REG *) 	0xFFFFEF18) // (PDC_DBGU) Transmit Next Pointer Register
#define AT91C_DBGU_RNPR (AT91_CAST(AT91_REG *) 	0xFFFFEF10) // (PDC_DBGU) Receive Next Pointer Register
#define AT91C_DBGU_PTSR (AT91_CAST(AT91_REG *) 	0xFFFFEF24) // (PDC_DBGU) PDC Transfer Status Register
#define AT91C_DBGU_RPR  (AT91_CAST(AT91_REG *) 	0xFFFFEF00) // (PDC_DBGU) Receive Pointer Register
#define AT91C_DBGU_TPR  (AT91_CAST(AT91_REG *) 	0xFFFFEF08) // (PDC_DBGU) Transmit Pointer Register
#define AT91C_DBGU_TNCR (AT91_CAST(AT91_REG *) 	0xFFFFEF1C) // (PDC_DBGU) Transmit Next Counter Register
// ========== Register definition for DBGU peripheral ========== 
#define AT91C_DBGU_BRGR (AT91_CAST(AT91_REG *) 	0xFFFFEE20) // (DBGU) Baud Rate Generator Register
#define AT91C_DBGU_CR   (AT91_CAST(AT91_REG *) 	0xFFFFEE00) // (DBGU) Control Register
#define AT91C_DBGU_THR  (AT91_CAST(AT91_REG *) 	0xFFFFEE1C) // (DBGU) Transmitter Holding Register
#define AT91C_DBGU_IDR  (AT91_CAST(AT91_REG *) 	0xFFFFEE0C) // (DBGU) Interrupt Disable Register
#define AT91C_DBGU_EXID (AT91_CAST(AT91_REG *) 	0xFFFFEE44) // (DBGU) Chip ID Extension Register
#define AT91C_DBGU_IMR  (AT91_CAST(AT91_REG *) 	0xFFFFEE10) // (DBGU) Interrupt Mask Register
#define AT91C_DBGU_FNTR (AT91_CAST(AT91_REG *) 	0xFFFFEE48) // (DBGU) Force NTRST Register
#define AT91C_DBGU_IER  (AT91_CAST(AT91_REG *) 	0xFFFFEE08) // (DBGU) Interrupt Enable Register
#define AT91C_DBGU_CSR  (AT91_CAST(AT91_REG *) 	0xFFFFEE14) // (DBGU) Channel Status Register
#define AT91C_DBGU_MR   (AT91_CAST(AT91_REG *) 	0xFFFFEE04) // (DBGU) Mode Register
#define AT91C_DBGU_RHR  (AT91_CAST(AT91_REG *) 	0xFFFFEE18) // (DBGU) Receiver Holding Register
#define AT91C_DBGU_CIDR (AT91_CAST(AT91_REG *) 	0xFFFFEE40) // (DBGU) Chip ID Register
// ========== Register definition for AIC peripheral ========== 
#define AT91C_AIC_IVR   (AT91_CAST(AT91_REG *) 	0xFFFFF100) // (AIC) IRQ Vector Register
#define AT91C_AIC_SMR   (AT91_CAST(AT91_REG *) 	0xFFFFF000) // (AIC) Source Mode Register
#define AT91C_AIC_FVR   (AT91_CAST(AT91_REG *) 	0xFFFFF104) // (AIC) FIQ Vector Register
#define AT91C_AIC_DCR   (AT91_CAST(AT91_REG *) 	0xFFFFF138) // (AIC) Debug Control Register (Protect)
#define AT91C_AIC_EOICR (AT91_CAST(AT91_REG *) 	0xFFFFF130) // (AIC) End of Interrupt Command Register
#define AT91C_AIC_SVR   (AT91_CAST(AT91_REG *) 	0xFFFFF080) // (AIC) Source Vector Register
#define AT91C_AIC_FFSR  (AT91_CAST(AT91_REG *) 	0xFFFFF148) // (AIC) Fast Forcing Status Register
#define AT91C_AIC_ICCR  (AT91_CAST(AT91_REG *) 	0xFFFFF128) // (AIC) Interrupt Clear Command Register
#define AT91C_AIC_ISR   (AT91_CAST(AT91_REG *) 	0xFFFFF108) // (AIC) Interrupt Status Register
#define AT91C_AIC_IMR   (AT91_CAST(AT91_REG *) 	0xFFFFF110) // (AIC) Interrupt Mask Register
#define AT91C_AIC_IPR   (AT91_CAST(AT91_REG *) 	0xFFFFF10C) // (AIC) Interrupt Pending Register
#define AT91C_AIC_FFER  (AT91_CAST(AT91_REG *) 	0xFFFFF140) // (AIC) Fast Forcing Enable Register
#define AT91C_AIC_IECR  (AT91_CAST(AT91_REG *) 	0xFFFFF120) // (AIC) Interrupt Enable Command Register
#define AT91C_AIC_ISCR  (AT91_CAST(AT91_REG *) 	0xFFFFF12C) // (AIC) Interrupt Set Command Register
#define AT91C_AIC_FFDR  (AT91_CAST(AT91_REG *) 	0xFFFFF144) // (AIC) Fast Forcing Disable Register
#define AT91C_AIC_CISR  (AT91_CAST(AT91_REG *) 	0xFFFFF114) // (AIC) Core Interrupt Status Register
#define AT91C_AIC_IDCR  (AT91_CAST(AT91_REG *) 	0xFFFFF124) // (AIC) Interrupt Disable Command Register
#define AT91C_AIC_SPU   (AT91_CAST(AT91_REG *) 	0xFFFFF134) // (AIC) Spurious Vector Register
// ========== Register definition for PIOA peripheral ========== 
#define AT91C_PIOA_OWDR (AT91_CAST(AT91_REG *) 	0xFFFFF2A4) // (PIOA) Output Write Disable Register
#define AT91C_PIOA_MDDR (AT91_CAST(AT91_REG *) 	0xFFFFF254) // (PIOA) Multi-driver Disable Register
#define AT91C_PIOA_IFSR (AT91_CAST(AT91_REG *) 	0xFFFFF228) // (PIOA) Input Filter Status Register
#define AT91C_PIOA_ISR  (AT91_CAST(AT91_REG *) 	0xFFFFF24C) // (PIOA) Interrupt Status Register
#define AT91C_PIOA_CODR (AT91_CAST(AT91_REG *) 	0xFFFFF234) // (PIOA) Clear Output Data Register
#define AT91C_PIOA_PDR  (AT91_CAST(AT91_REG *) 	0xFFFFF204) // (PIOA) PIO Disable Register
#define AT91C_PIOA_OWSR (AT91_CAST(AT91_REG *) 	0xFFFFF2A8) // (PIOA) Output Write Status Register
#define AT91C_PIOA_ASR  (AT91_CAST(AT91_REG *) 	0xFFFFF270) // (PIOA) Select A Register
#define AT91C_PIOA_PPUSR (AT91_CAST(AT91_REG *) 	0xFFFFF268) // (PIOA) Pull-up Status Register
#define AT91C_PIOA_IMR  (AT91_CAST(AT91_REG *) 	0xFFFFF248) // (PIOA) Interrupt Mask Register
#define AT91C_PIOA_OSR  (AT91_CAST(AT91_REG *) 	0xFFFFF218) // (PIOA) Output Status Register
#define AT91C_PIOA_ABSR (AT91_CAST(AT91_REG *) 	0xFFFFF278) // (PIOA) AB Select Status Register
#define AT91C_PIOA_MDER (AT91_CAST(AT91_REG *) 	0xFFFFF250) // (PIOA) Multi-driver Enable Register
#define AT91C_PIOA_IFDR (AT91_CAST(AT91_REG *) 	0xFFFFF224) // (PIOA) Input Filter Disable Register
#define AT91C_PIOA_PDSR (AT91_CAST(AT91_REG *) 	0xFFFFF23C) // (PIOA) Pin Data Status Register
#define AT91C_PIOA_SODR (AT91_CAST(AT91_REG *) 	0xFFFFF230) // (PIOA) Set Output Data Register
#define AT91C_PIOA_BSR  (AT91_CAST(AT91_REG *) 	0xFFFFF274) // (PIOA) Select B Register
#define AT91C_PIOA_OWER (AT91_CAST(AT91_REG *) 	0xFFFFF2A0) // (PIOA) Output Write Enable Register
#define AT91C_PIOA_IFER (AT91_CAST(AT91_REG *) 	0xFFFFF220) // (PIOA) Input Filter Enable Register
#define AT91C_PIOA_IDR  (AT91_CAST(AT91_REG *) 	0xFFFFF244) // (PIOA) Interrupt Disable Register
#define AT91C_PIOA_ODR  (AT91_CAST(AT91_REG *) 	0xFFFFF214) // (PIOA) Output Disable Registerr
#define AT91C_PIOA_IER  (AT91_CAST(AT91_REG *) 	0xFFFFF240) // (PIOA) Interrupt Enable Register
#define AT91C_PIOA_PPUER (AT91_CAST(AT91_REG *) 	0xFFFFF264) // (PIOA) Pull-up Enable Register
#define AT91C_PIOA_MDSR (AT91_CAST(AT91_REG *) 	0xFFFFF258) // (PIOA) Multi-driver Status Register
#define AT91C_PIOA_OER  (AT91_CAST(AT91_REG *) 	0xFFFFF210) // (PIOA) Output Enable Register
#define AT91C_PIOA_PER  (AT91_CAST(AT91_REG *) 	0xFFFFF200) // (PIOA) PIO Enable Register
#define AT91C_PIOA_PPUDR (AT91_CAST(AT91_REG *) 	0xFFFFF260) // (PIOA) Pull-up Disable Register
#define AT91C_PIOA_ODSR (AT91_CAST(AT91_REG *) 	0xFFFFF238) // (PIOA) Output Data Status Register
#define AT91C_PIOA_PSR  (AT91_CAST(AT91_REG *) 	0xFFFFF208) // (PIOA) PIO Status Register
// ========== Register definition for PIOB peripheral ========== 
#define AT91C_PIOB_ODR  (AT91_CAST(AT91_REG *) 	0xFFFFF414) // (PIOB) Output Disable Registerr
#define AT91C_PIOB_SODR (AT91_CAST(AT91_REG *) 	0xFFFFF430) // (PIOB) Set Output Data Register
#define AT91C_PIOB_ISR  (AT91_CAST(AT91_REG *) 	0xFFFFF44C) // (PIOB) Interrupt Status Register
#define AT91C_PIOB_ABSR (AT91_CAST(AT91_REG *) 	0xFFFFF478) // (PIOB) AB Select Status Register
#define AT91C_PIOB_IER  (AT91_CAST(AT91_REG *) 	0xFFFFF440) // (PIOB) Interrupt Enable Register
#define AT91C_PIOB_PPUDR (AT91_CAST(AT91_REG *) 	0xFFFFF460) // (PIOB) Pull-up Disable Register
#define AT91C_PIOB_IMR  (AT91_CAST(AT91_REG *) 	0xFFFFF448) // (PIOB) Interrupt Mask Register
#define AT91C_PIOB_PER  (AT91_CAST(AT91_REG *) 	0xFFFFF400) // (PIOB) PIO Enable Register
#define AT91C_PIOB_IFDR (AT91_CAST(AT91_REG *) 	0xFFFFF424) // (PIOB) Input Filter Disable Register
#define AT91C_PIOB_OWDR (AT91_CAST(AT91_REG *) 	0xFFFFF4A4) // (PIOB) Output Write Disable Register
#define AT91C_PIOB_MDSR (AT91_CAST(AT91_REG *) 	0xFFFFF458) // (PIOB) Multi-driver Status Register
#define AT91C_PIOB_IDR  (AT91_CAST(AT91_REG *) 	0xFFFFF444) // (PIOB) Interrupt Disable Register
#define AT91C_PIOB_ODSR (AT91_CAST(AT91_REG *) 	0xFFFFF438) // (PIOB) Output Data Status Register
#define AT91C_PIOB_PPUSR (AT91_CAST(AT91_REG *) 	0xFFFFF468) // (PIOB) Pull-up Status Register
#define AT91C_PIOB_OWSR (AT91_CAST(AT91_REG *) 	0xFFFFF4A8) // (PIOB) Output Write Status Register
#define AT91C_PIOB_BSR  (AT91_CAST(AT91_REG *) 	0xFFFFF474) // (PIOB) Select B Register
#define AT91C_PIOB_OWER (AT91_CAST(AT91_REG *) 	0xFFFFF4A0) // (PIOB) Output Write Enable Register
#define AT91C_PIOB_IFER (AT91_CAST(AT91_REG *) 	0xFFFFF420) // (PIOB) Input Filter Enable Register
#define AT91C_PIOB_PDSR (AT91_CAST(AT91_REG *) 	0xFFFFF43C) // (PIOB) Pin Data Status Register
#define AT91C_PIOB_PPUER (AT91_CAST(AT91_REG *) 	0xFFFFF464) // (PIOB) Pull-up Enable Register
#define AT91C_PIOB_OSR  (AT91_CAST(AT91_REG *) 	0xFFFFF418) // (PIOB) Output Status Register
#define AT91C_PIOB_ASR  (AT91_CAST(AT91_REG *) 	0xFFFFF470) // (PIOB) Select A Register
#define AT91C_PIOB_MDDR (AT91_CAST(AT91_REG *) 	0xFFFFF454) // (PIOB) Multi-driver Disable Register
#define AT91C_PIOB_CODR (AT91_CAST(AT91_REG *) 	0xFFFFF434) // (PIOB) Clear Output Data Register
#define AT91C_PIOB_MDER (AT91_CAST(AT91_REG *) 	0xFFFFF450) // (PIOB) Multi-driver Enable Register
#define AT91C_PIOB_PDR  (AT91_CAST(AT91_REG *) 	0xFFFFF404) // (PIOB) PIO Disable Register
#define AT91C_PIOB_IFSR (AT91_CAST(AT91_REG *) 	0xFFFFF428) // (PIOB) Input Filter Status Register
#define AT91C_PIOB_OER  (AT91_CAST(AT91_REG *) 	0xFFFFF410) // (PIOB) Output Enable Register
#define AT91C_PIOB_PSR  (AT91_CAST(AT91_REG *) 	0xFFFFF408) // (PIOB) PIO Status Register
// ========== Register definition for PIOC peripheral ========== 
#define AT91C_PIOC_OWDR (AT91_CAST(AT91_REG *) 	0xFFFFF6A4) // (PIOC) Output Write Disable Register
#define AT91C_PIOC_MDER (AT91_CAST(AT91_REG *) 	0xFFFFF650) // (PIOC) Multi-driver Enable Register
#define AT91C_PIOC_PPUSR (AT91_CAST(AT91_REG *) 	0xFFFFF668) // (PIOC) Pull-up Status Register
#define AT91C_PIOC_IMR  (AT91_CAST(AT91_REG *) 	0xFFFFF648) // (PIOC) Interrupt Mask Register
#define AT91C_PIOC_ASR  (AT91_CAST(AT91_REG *) 	0xFFFFF670) // (PIOC) Select A Register
#define AT91C_PIOC_PPUDR (AT91_CAST(AT91_REG *) 	0xFFFFF660) // (PIOC) Pull-up Disable Register
#define AT91C_PIOC_PSR  (AT91_CAST(AT91_REG *) 	0xFFFFF608) // (PIOC) PIO Status Register
#define AT91C_PIOC_IER  (AT91_CAST(AT91_REG *) 	0xFFFFF640) // (PIOC) Interrupt Enable Register
#define AT91C_PIOC_CODR (AT91_CAST(AT91_REG *) 	0xFFFFF634) // (PIOC) Clear Output Data Register
#define AT91C_PIOC_OWER (AT91_CAST(AT91_REG *) 	0xFFFFF6A0) // (PIOC) Output Write Enable Register
#define AT91C_PIOC_ABSR (AT91_CAST(AT91_REG *) 	0xFFFFF678) // (PIOC) AB Select Status Register
#define AT91C_PIOC_IFDR (AT91_CAST(AT91_REG *) 	0xFFFFF624) // (PIOC) Input Filter Disable Register
#define AT91C_PIOC_PDSR (AT91_CAST(AT91_REG *) 	0xFFFFF63C) // (PIOC) Pin Data Status Register
#define AT91C_PIOC_IDR  (AT91_CAST(AT91_REG *) 	0xFFFFF644) // (PIOC) Interrupt Disable Register
#define AT91C_PIOC_OWSR (AT91_CAST(AT91_REG *) 	0xFFFFF6A8) // (PIOC) Output Write Status Register
#define AT91C_PIOC_PDR  (AT91_CAST(AT91_REG *) 	0xFFFFF604) // (PIOC) PIO Disable Register
#define AT91C_PIOC_ODR  (AT91_CAST(AT91_REG *) 	0xFFFFF614) // (PIOC) Output Disable Registerr
#define AT91C_PIOC_IFSR (AT91_CAST(AT91_REG *) 	0xFFFFF628) // (PIOC) Input Filter Status Register
#define AT91C_PIOC_PPUER (AT91_CAST(AT91_REG *) 	0xFFFFF664) // (PIOC) Pull-up Enable Register
#define AT91C_PIOC_SODR (AT91_CAST(AT91_REG *) 	0xFFFFF630) // (PIOC) Set Output Data Register
#define AT91C_PIOC_ISR  (AT91_CAST(AT91_REG *) 	0xFFFFF64C) // (PIOC) Interrupt Status Register
#define AT91C_PIOC_ODSR (AT91_CAST(AT91_REG *) 	0xFFFFF638) // (PIOC) Output Data Status Register
#define AT91C_PIOC_OSR  (AT91_CAST(AT91_REG *) 	0xFFFFF618) // (PIOC) Output Status Register
#define AT91C_PIOC_MDSR (AT91_CAST(AT91_REG *) 	0xFFFFF658) // (PIOC) Multi-driver Status Register
#define AT91C_PIOC_IFER (AT91_CAST(AT91_REG *) 	0xFFFFF620) // (PIOC) Input Filter Enable Register
#define AT91C_PIOC_BSR  (AT91_CAST(AT91_REG *) 	0xFFFFF674) // (PIOC) Select B Register
#define AT91C_PIOC_MDDR (AT91_CAST(AT91_REG *) 	0xFFFFF654) // (PIOC) Multi-driver Disable Register
#define AT91C_PIOC_OER  (AT91_CAST(AT91_REG *) 	0xFFFFF610) // (PIOC) Output Enable Register
#define AT91C_PIOC_PER  (AT91_CAST(AT91_REG *) 	0xFFFFF600) // (PIOC) PIO Enable Register
// ========== Register definition for PIOD peripheral ========== 
#define AT91C_PIOD_OWDR (AT91_CAST(AT91_REG *) 	0xFFFFF8A4) // (PIOD) Output Write Disable Register
#define AT91C_PIOD_SODR (AT91_CAST(AT91_REG *) 	0xFFFFF830) // (PIOD) Set Output Data Register
#define AT91C_PIOD_PPUER (AT91_CAST(AT91_REG *) 	0xFFFFF864) // (PIOD) Pull-up Enable Register
#define AT91C_PIOD_CODR (AT91_CAST(AT91_REG *) 	0xFFFFF834) // (PIOD) Clear Output Data Register
#define AT91C_PIOD_PSR  (AT91_CAST(AT91_REG *) 	0xFFFFF808) // (PIOD) PIO Status Register
#define AT91C_PIOD_PDR  (AT91_CAST(AT91_REG *) 	0xFFFFF804) // (PIOD) PIO Disable Register
#define AT91C_PIOD_ODR  (AT91_CAST(AT91_REG *) 	0xFFFFF814) // (PIOD) Output Disable Registerr
#define AT91C_PIOD_PPUSR (AT91_CAST(AT91_REG *) 	0xFFFFF868) // (PIOD) Pull-up Status Register
#define AT91C_PIOD_ABSR (AT91_CAST(AT91_REG *) 	0xFFFFF878) // (PIOD) AB Select Status Register
#define AT91C_PIOD_IFSR (AT91_CAST(AT91_REG *) 	0xFFFFF828) // (PIOD) Input Filter Status Register
#define AT91C_PIOD_OER  (AT91_CAST(AT91_REG *) 	0xFFFFF810) // (PIOD) Output Enable Register
#define AT91C_PIOD_IMR  (AT91_CAST(AT91_REG *) 	0xFFFFF848) // (PIOD) Interrupt Mask Register
#define AT91C_PIOD_ASR  (AT91_CAST(AT91_REG *) 	0xFFFFF870) // (PIOD) Select A Register
#define AT91C_PIOD_MDDR (AT91_CAST(AT91_REG *) 	0xFFFFF854) // (PIOD) Multi-driver Disable Register
#define AT91C_PIOD_OWSR (AT91_CAST(AT91_REG *) 	0xFFFFF8A8) // (PIOD) Output Write Status Register
#define AT91C_PIOD_PER  (AT91_CAST(AT91_REG *) 	0xFFFFF800) // (PIOD) PIO Enable Register
#define AT91C_PIOD_IDR  (AT91_CAST(AT91_REG *) 	0xFFFFF844) // (PIOD) Interrupt Disable Register
#define AT91C_PIOD_MDER (AT91_CAST(AT91_REG *) 	0xFFFFF850) // (PIOD) Multi-driver Enable Register
#define AT91C_PIOD_PDSR (AT91_CAST(AT91_REG *) 	0xFFFFF83C) // (PIOD) Pin Data Status Register
#define AT91C_PIOD_MDSR (AT91_CAST(AT91_REG *) 	0xFFFFF858) // (PIOD) Multi-driver Status Register
#define AT91C_PIOD_OWER (AT91_CAST(AT91_REG *) 	0xFFFFF8A0) // (PIOD) Output Write Enable Register
#define AT91C_PIOD_BSR  (AT91_CAST(AT91_REG *) 	0xFFFFF874) // (PIOD) Select B Register
#define AT91C_PIOD_PPUDR (AT91_CAST(AT91_REG *) 	0xFFFFF860) // (PIOD) Pull-up Disable Register
#define AT91C_PIOD_IFDR (AT91_CAST(AT91_REG *) 	0xFFFFF824) // (PIOD) Input Filter Disable Register
#define AT91C_PIOD_IER  (AT91_CAST(AT91_REG *) 	0xFFFFF840) // (PIOD) Interrupt Enable Register
#define AT91C_PIOD_OSR  (AT91_CAST(AT91_REG *) 	0xFFFFF818) // (PIOD) Output Status Register
#define AT91C_PIOD_ODSR (AT91_CAST(AT91_REG *) 	0xFFFFF838) // (PIOD) Output Data Status Register
#define AT91C_PIOD_ISR  (AT91_CAST(AT91_REG *) 	0xFFFFF84C) // (PIOD) Interrupt Status Register
#define AT91C_PIOD_IFER (AT91_CAST(AT91_REG *) 	0xFFFFF820) // (PIOD) Input Filter Enable Register
// ========== Register definition for PIOE peripheral ========== 
#define AT91C_PIOE_ODSR (AT91_CAST(AT91_REG *) 	0xFFFFFA38) // (PIOE) Output Data Status Register
#define AT91C_PIOE_ABSR (AT91_CAST(AT91_REG *) 	0xFFFFFA78) // (PIOE) AB Select Status Register
#define AT91C_PIOE_PSR  (AT91_CAST(AT91_REG *) 	0xFFFFFA08) // (PIOE) PIO Status Register
#define AT91C_PIOE_PPUDR (AT91_CAST(AT91_REG *) 	0xFFFFFA60) // (PIOE) Pull-up Disable Register
#define AT91C_PIOE_OER  (AT91_CAST(AT91_REG *) 	0xFFFFFA10) // (PIOE) Output Enable Register
#define AT91C_PIOE_OWDR (AT91_CAST(AT91_REG *) 	0xFFFFFAA4) // (PIOE) Output Write Disable Register
#define AT91C_PIOE_PER  (AT91_CAST(AT91_REG *) 	0xFFFFFA00) // (PIOE) PIO Enable Register
#define AT91C_PIOE_IFSR (AT91_CAST(AT91_REG *) 	0xFFFFFA28) // (PIOE) Input Filter Status Register
#define AT91C_PIOE_IFER (AT91_CAST(AT91_REG *) 	0xFFFFFA20) // (PIOE) Input Filter Enable Register
#define AT91C_PIOE_ODR  (AT91_CAST(AT91_REG *) 	0xFFFFFA14) // (PIOE) Output Disable Registerr
#define AT91C_PIOE_PPUSR (AT91_CAST(AT91_REG *) 	0xFFFFFA68) // (PIOE) Pull-up Status Register
#define AT91C_PIOE_IFDR (AT91_CAST(AT91_REG *) 	0xFFFFFA24) // (PIOE) Input Filter Disable Register
#define AT91C_PIOE_PDSR (AT91_CAST(AT91_REG *) 	0xFFFFFA3C) // (PIOE) Pin Data Status Register
#define AT91C_PIOE_PPUER (AT91_CAST(AT91_REG *) 	0xFFFFFA64) // (PIOE) Pull-up Enable Register
#define AT91C_PIOE_IDR  (AT91_CAST(AT91_REG *) 	0xFFFFFA44) // (PIOE) Interrupt Disable Register
#define AT91C_PIOE_MDDR (AT91_CAST(AT91_REG *) 	0xFFFFFA54) // (PIOE) Multi-driver Disable Register
#define AT91C_PIOE_ISR  (AT91_CAST(AT91_REG *) 	0xFFFFFA4C) // (PIOE) Interrupt Status Register
#define AT91C_PIOE_OSR  (AT91_CAST(AT91_REG *) 	0xFFFFFA18) // (PIOE) Output Status Register
#define AT91C_PIOE_CODR (AT91_CAST(AT91_REG *) 	0xFFFFFA34) // (PIOE) Clear Output Data Register
#define AT91C_PIOE_MDSR (AT91_CAST(AT91_REG *) 	0xFFFFFA58) // (PIOE) Multi-driver Status Register
#define AT91C_PIOE_PDR  (AT91_CAST(AT91_REG *) 	0xFFFFFA04) // (PIOE) PIO Disable Register
#define AT91C_PIOE_IER  (AT91_CAST(AT91_REG *) 	0xFFFFFA40) // (PIOE) Interrupt Enable Register
#define AT91C_PIOE_OWSR (AT91_CAST(AT91_REG *) 	0xFFFFFAA8) // (PIOE) Output Write Status Register
#define AT91C_PIOE_BSR  (AT91_CAST(AT91_REG *) 	0xFFFFFA74) // (PIOE) Select B Register
#define AT91C_PIOE_ASR  (AT91_CAST(AT91_REG *) 	0xFFFFFA70) // (PIOE) Select A Register
#define AT91C_PIOE_SODR (AT91_CAST(AT91_REG *) 	0xFFFFFA30) // (PIOE) Set Output Data Register
#define AT91C_PIOE_IMR  (AT91_CAST(AT91_REG *) 	0xFFFFFA48) // (PIOE) Interrupt Mask Register
#define AT91C_PIOE_OWER (AT91_CAST(AT91_REG *) 	0xFFFFFAA0) // (PIOE) Output Write Enable Register
#define AT91C_PIOE_MDER (AT91_CAST(AT91_REG *) 	0xFFFFFA50) // (PIOE) Multi-driver Enable Register
// ========== Register definition for CKGR peripheral ========== 
#define AT91C_CKGR_MOR  (AT91_CAST(AT91_REG *) 	0xFFFFFC20) // (CKGR) Main Oscillator Register
#define AT91C_CKGR_PLLBR (AT91_CAST(AT91_REG *) 	0xFFFFFC2C) // (CKGR) PLL B Register
#define AT91C_CKGR_MCFR (AT91_CAST(AT91_REG *) 	0xFFFFFC24) // (CKGR) Main Clock  Frequency Register
#define AT91C_CKGR_PLLAR (AT91_CAST(AT91_REG *) 	0xFFFFFC28) // (CKGR) PLL A Register
// ========== Register definition for PMC peripheral ========== 
#define AT91C_PMC_PCER  (AT91_CAST(AT91_REG *) 	0xFFFFFC10) // (PMC) Peripheral Clock Enable Register
#define AT91C_PMC_PCKR  (AT91_CAST(AT91_REG *) 	0xFFFFFC40) // (PMC) Programmable Clock Register
#define AT91C_PMC_MCKR  (AT91_CAST(AT91_REG *) 	0xFFFFFC30) // (PMC) Master Clock Register
#define AT91C_PMC_PLLAR (AT91_CAST(AT91_REG *) 	0xFFFFFC28) // (PMC) PLL A Register
#define AT91C_PMC_PCDR  (AT91_CAST(AT91_REG *) 	0xFFFFFC14) // (PMC) Peripheral Clock Disable Register
#define AT91C_PMC_SCSR  (AT91_CAST(AT91_REG *) 	0xFFFFFC08) // (PMC) System Clock Status Register
#define AT91C_PMC_MCFR  (AT91_CAST(AT91_REG *) 	0xFFFFFC24) // (PMC) Main Clock  Frequency Register
#define AT91C_PMC_IMR   (AT91_CAST(AT91_REG *) 	0xFFFFFC6C) // (PMC) Interrupt Mask Register
#define AT91C_PMC_IER   (AT91_CAST(AT91_REG *) 	0xFFFFFC60) // (PMC) Interrupt Enable Register
#define AT91C_PMC_MOR   (AT91_CAST(AT91_REG *) 	0xFFFFFC20) // (PMC) Main Oscillator Register
#define AT91C_PMC_IDR   (AT91_CAST(AT91_REG *) 	0xFFFFFC64) // (PMC) Interrupt Disable Register
#define AT91C_PMC_PLLBR (AT91_CAST(AT91_REG *) 	0xFFFFFC2C) // (PMC) PLL B Register
#define AT91C_PMC_SCDR  (AT91_CAST(AT91_REG *) 	0xFFFFFC04) // (PMC) System Clock Disable Register
#define AT91C_PMC_PCSR  (AT91_CAST(AT91_REG *) 	0xFFFFFC18) // (PMC) Peripheral Clock Status Register
#define AT91C_PMC_SCER  (AT91_CAST(AT91_REG *) 	0xFFFFFC00) // (PMC) System Clock Enable Register
#define AT91C_PMC_SR    (AT91_CAST(AT91_REG *) 	0xFFFFFC68) // (PMC) Status Register
// ========== Register definition for RSTC peripheral ========== 
#define AT91C_RSTC_RCR  (AT91_CAST(AT91_REG *) 	0xFFFFFD00) // (RSTC) Reset Control Register
#define AT91C_RSTC_VER  (AT91_CAST(AT91_REG *) 	0xFFFFFDFC) // (RSTC) Version Register
#define AT91C_RSTC_RMR  (AT91_CAST(AT91_REG *) 	0xFFFFFD08) // (RSTC) Reset Mode Register
#define AT91C_RSTC_RSR  (AT91_CAST(AT91_REG *) 	0xFFFFFD04) // (RSTC) Reset Status Register
// ========== Register definition for SHDWC peripheral ========== 
#define AT91C_SHDWC_SHSR (AT91_CAST(AT91_REG *) 	0xFFFFFD18) // (SHDWC) Shut Down Status Register
#define AT91C_SHDWC_SHMR (AT91_CAST(AT91_REG *) 	0xFFFFFD14) // (SHDWC) Shut Down Mode Register
#define AT91C_SHDWC_SHCR (AT91_CAST(AT91_REG *) 	0xFFFFFD10) // (SHDWC) Shut Down Control Register
// ========== Register definition for RTTC0 peripheral ========== 
#define AT91C_RTTC0_RTSR (AT91_CAST(AT91_REG *) 	0xFFFFFD2C) // (RTTC0) Real-time Status Register
#define AT91C_RTTC0_RTMR (AT91_CAST(AT91_REG *) 	0xFFFFFD20) // (RTTC0) Real-time Mode Register
#define AT91C_RTTC0_RTVR (AT91_CAST(AT91_REG *) 	0xFFFFFD28) // (RTTC0) Real-time Value Register
#define AT91C_RTTC0_RTAR (AT91_CAST(AT91_REG *) 	0xFFFFFD24) // (RTTC0) Real-time Alarm Register
// ========== Register definition for RTTC1 peripheral ========== 
#define AT91C_RTTC1_RTAR (AT91_CAST(AT91_REG *) 	0xFFFFFD54) // (RTTC1) Real-time Alarm Register
#define AT91C_RTTC1_RTSR (AT91_CAST(AT91_REG *) 	0xFFFFFD5C) // (RTTC1) Real-time Status Register
#define AT91C_RTTC1_RTVR (AT91_CAST(AT91_REG *) 	0xFFFFFD58) // (RTTC1) Real-time Value Register
#define AT91C_RTTC1_RTMR (AT91_CAST(AT91_REG *) 	0xFFFFFD50) // (RTTC1) Real-time Mode Register
// ========== Register definition for PITC peripheral ========== 
#define AT91C_PITC_PIVR (AT91_CAST(AT91_REG *) 	0xFFFFFD38) // (PITC) Period Interval Value Register
#define AT91C_PITC_PISR (AT91_CAST(AT91_REG *) 	0xFFFFFD34) // (PITC) Period Interval Status Register
#define AT91C_PITC_PIIR (AT91_CAST(AT91_REG *) 	0xFFFFFD3C) // (PITC) Period Interval Image Register
#define AT91C_PITC_PIMR (AT91_CAST(AT91_REG *) 	0xFFFFFD30) // (PITC) Period Interval Mode Register
// ========== Register definition for WDTC peripheral ========== 
#define AT91C_WDTC_WDCR (AT91_CAST(AT91_REG *) 	0xFFFFFD40) // (WDTC) Watchdog Control Register
#define AT91C_WDTC_WDSR (AT91_CAST(AT91_REG *) 	0xFFFFFD48) // (WDTC) Watchdog Status Register
#define AT91C_WDTC_WDMR (AT91_CAST(AT91_REG *) 	0xFFFFFD44) // (WDTC) Watchdog Mode Register
// ========== Register definition for TC0 peripheral ========== 
#define AT91C_TC0_IER   (AT91_CAST(AT91_REG *) 	0xFFF7C024) // (TC0) Interrupt Enable Register
#define AT91C_TC0_IMR   (AT91_CAST(AT91_REG *) 	0xFFF7C02C) // (TC0) Interrupt Mask Register
#define AT91C_TC0_CCR   (AT91_CAST(AT91_REG *) 	0xFFF7C000) // (TC0) Channel Control Register
#define AT91C_TC0_RB    (AT91_CAST(AT91_REG *) 	0xFFF7C018) // (TC0) Register B
#define AT91C_TC0_CV    (AT91_CAST(AT91_REG *) 	0xFFF7C010) // (TC0) Counter Value
#define AT91C_TC0_SR    (AT91_CAST(AT91_REG *) 	0xFFF7C020) // (TC0) Status Register
#define AT91C_TC0_CMR   (AT91_CAST(AT91_REG *) 	0xFFF7C004) // (TC0) Channel Mode Register (Capture Mode / Waveform Mode)
#define AT91C_TC0_RA    (AT91_CAST(AT91_REG *) 	0xFFF7C014) // (TC0) Register A
#define AT91C_TC0_RC    (AT91_CAST(AT91_REG *) 	0xFFF7C01C) // (TC0) Register C
#define AT91C_TC0_IDR   (AT91_CAST(AT91_REG *) 	0xFFF7C028) // (TC0) Interrupt Disable Register
// ========== Register definition for TC1 peripheral ========== 
#define AT91C_TC1_IER   (AT91_CAST(AT91_REG *) 	0xFFF7C064) // (TC1) Interrupt Enable Register
#define AT91C_TC1_SR    (AT91_CAST(AT91_REG *) 	0xFFF7C060) // (TC1) Status Register
#define AT91C_TC1_RC    (AT91_CAST(AT91_REG *) 	0xFFF7C05C) // (TC1) Register C
#define AT91C_TC1_CV    (AT91_CAST(AT91_REG *) 	0xFFF7C050) // (TC1) Counter Value
#define AT91C_TC1_RA    (AT91_CAST(AT91_REG *) 	0xFFF7C054) // (TC1) Register A
#define AT91C_TC1_CMR   (AT91_CAST(AT91_REG *) 	0xFFF7C044) // (TC1) Channel Mode Register (Capture Mode / Waveform Mode)
#define AT91C_TC1_IDR   (AT91_CAST(AT91_REG *) 	0xFFF7C068) // (TC1) Interrupt Disable Register
#define AT91C_TC1_RB    (AT91_CAST(AT91_REG *) 	0xFFF7C058) // (TC1) Register B
#define AT91C_TC1_IMR   (AT91_CAST(AT91_REG *) 	0xFFF7C06C) // (TC1) Interrupt Mask Register
#define AT91C_TC1_CCR   (AT91_CAST(AT91_REG *) 	0xFFF7C040) // (TC1) Channel Control Register
// ========== Register definition for TC2 peripheral ========== 
#define AT91C_TC2_SR    (AT91_CAST(AT91_REG *) 	0xFFF7C0A0) // (TC2) Status Register
#define AT91C_TC2_IMR   (AT91_CAST(AT91_REG *) 	0xFFF7C0AC) // (TC2) Interrupt Mask Register
#define AT91C_TC2_IER   (AT91_CAST(AT91_REG *) 	0xFFF7C0A4) // (TC2) Interrupt Enable Register
#define AT91C_TC2_CV    (AT91_CAST(AT91_REG *) 	0xFFF7C090) // (TC2) Counter Value
#define AT91C_TC2_RB    (AT91_CAST(AT91_REG *) 	0xFFF7C098) // (TC2) Register B
#define AT91C_TC2_CCR   (AT91_CAST(AT91_REG *) 	0xFFF7C080) // (TC2) Channel Control Register
#define AT91C_TC2_CMR   (AT91_CAST(AT91_REG *) 	0xFFF7C084) // (TC2) Channel Mode Register (Capture Mode / Waveform Mode)
#define AT91C_TC2_RA    (AT91_CAST(AT91_REG *) 	0xFFF7C094) // (TC2) Register A
#define AT91C_TC2_IDR   (AT91_CAST(AT91_REG *) 	0xFFF7C0A8) // (TC2) Interrupt Disable Register
#define AT91C_TC2_RC    (AT91_CAST(AT91_REG *) 	0xFFF7C09C) // (TC2) Register C
// ========== Register definition for TCB0 peripheral ========== 
#define AT91C_TCB0_IPNAME1 (AT91_CAST(AT91_REG *) 	0xFFF7C0F0) // (TCB0) TC IPNAME1 REGISTER 
#define AT91C_TCB0_IPNAME2 (AT91_CAST(AT91_REG *) 	0xFFF7C0F4) // (TCB0) TC IPNAME2 REGISTER 
#define AT91C_TCB0_FEATURES (AT91_CAST(AT91_REG *) 	0xFFF7C0F8) // (TCB0) TC FEATURES REGISTER 
#define AT91C_TCB0_BCR  (AT91_CAST(AT91_REG *) 	0xFFF7C0C0) // (TCB0) TC Block Control Register
#define AT91C_TCB0_VER  (AT91_CAST(AT91_REG *) 	0xFFF7C0FC) // (TCB0)  Version Register
#define AT91C_TCB0_BMR  (AT91_CAST(AT91_REG *) 	0xFFF7C0C4) // (TCB0) TC Block Mode Register
#define AT91C_TCB0_ADDRSIZE (AT91_CAST(AT91_REG *) 	0xFFF7C0EC) // (TCB0) TC ADDRSIZE REGISTER 
// ========== Register definition for TCB1 peripheral ========== 
#define AT91C_TCB1_VER  (AT91_CAST(AT91_REG *) 	0xFFF7C13C) // (TCB1)  Version Register
#define AT91C_TCB1_IPNAME2 (AT91_CAST(AT91_REG *) 	0xFFF7C134) // (TCB1) TC IPNAME2 REGISTER 
#define AT91C_TCB1_ADDRSIZE (AT91_CAST(AT91_REG *) 	0xFFF7C12C) // (TCB1) TC ADDRSIZE REGISTER 
#define AT91C_TCB1_BMR  (AT91_CAST(AT91_REG *) 	0xFFF7C104) // (TCB1) TC Block Mode Register
#define AT91C_TCB1_FEATURES (AT91_CAST(AT91_REG *) 	0xFFF7C138) // (TCB1) TC FEATURES REGISTER 
#define AT91C_TCB1_BCR  (AT91_CAST(AT91_REG *) 	0xFFF7C100) // (TCB1) TC Block Control Register
#define AT91C_TCB1_IPNAME1 (AT91_CAST(AT91_REG *) 	0xFFF7C130) // (TCB1) TC IPNAME1 REGISTER 
// ========== Register definition for TCB2 peripheral ========== 
#define AT91C_TCB2_IPNAME2 (AT91_CAST(AT91_REG *) 	0xFFF7C174) // (TCB2) TC IPNAME2 REGISTER 
#define AT91C_TCB2_FEATURES (AT91_CAST(AT91_REG *) 	0xFFF7C178) // (TCB2) TC FEATURES REGISTER 
#define AT91C_TCB2_ADDRSIZE (AT91_CAST(AT91_REG *) 	0xFFF7C16C) // (TCB2) TC ADDRSIZE REGISTER 
#define AT91C_TCB2_VER  (AT91_CAST(AT91_REG *) 	0xFFF7C17C) // (TCB2)  Version Register
#define AT91C_TCB2_BCR  (AT91_CAST(AT91_REG *) 	0xFFF7C140) // (TCB2) TC Block Control Register
#define AT91C_TCB2_IPNAME1 (AT91_CAST(AT91_REG *) 	0xFFF7C170) // (TCB2) TC IPNAME1 REGISTER 
#define AT91C_TCB2_BMR  (AT91_CAST(AT91_REG *) 	0xFFF7C144) // (TCB2) TC Block Mode Register
// ========== Register definition for PDC_MCI0 peripheral ========== 
#define AT91C_MCI0_TCR  (AT91_CAST(AT91_REG *) 	0xFFF8010C) // (PDC_MCI0) Transmit Counter Register
#define AT91C_MCI0_TNCR (AT91_CAST(AT91_REG *) 	0xFFF8011C) // (PDC_MCI0) Transmit Next Counter Register
#define AT91C_MCI0_RNPR (AT91_CAST(AT91_REG *) 	0xFFF80110) // (PDC_MCI0) Receive Next Pointer Register
#define AT91C_MCI0_TPR  (AT91_CAST(AT91_REG *) 	0xFFF80108) // (PDC_MCI0) Transmit Pointer Register
#define AT91C_MCI0_TNPR (AT91_CAST(AT91_REG *) 	0xFFF80118) // (PDC_MCI0) Transmit Next Pointer Register
#define AT91C_MCI0_PTSR (AT91_CAST(AT91_REG *) 	0xFFF80124) // (PDC_MCI0) PDC Transfer Status Register
#define AT91C_MCI0_RCR  (AT91_CAST(AT91_REG *) 	0xFFF80104) // (PDC_MCI0) Receive Counter Register
#define AT91C_MCI0_PTCR (AT91_CAST(AT91_REG *) 	0xFFF80120) // (PDC_MCI0) PDC Transfer Control Register
#define AT91C_MCI0_RPR  (AT91_CAST(AT91_REG *) 	0xFFF80100) // (PDC_MCI0) Receive Pointer Register
#define AT91C_MCI0_RNCR (AT91_CAST(AT91_REG *) 	0xFFF80114) // (PDC_MCI0) Receive Next Counter Register
// ========== Register definition for MCI0 peripheral ========== 
#define AT91C_MCI0_CMDR (AT91_CAST(AT91_REG *) 	0xFFF80014) // (MCI0) MCI Command Register
#define AT91C_MCI0_IMR  (AT91_CAST(AT91_REG *) 	0xFFF8004C) // (MCI0) MCI Interrupt Mask Register
#define AT91C_MCI0_MR   (AT91_CAST(AT91_REG *) 	0xFFF80004) // (MCI0) MCI Mode Register
#define AT91C_MCI0_CR   (AT91_CAST(AT91_REG *) 	0xFFF80000) // (MCI0) MCI Control Register
#define AT91C_MCI0_IER  (AT91_CAST(AT91_REG *) 	0xFFF80044) // (MCI0) MCI Interrupt Enable Register
#define AT91C_MCI0_RDR  (AT91_CAST(AT91_REG *) 	0xFFF80030) // (MCI0) MCI Receive Data Register
#define AT91C_MCI0_SR   (AT91_CAST(AT91_REG *) 	0xFFF80040) // (MCI0) MCI Status Register
#define AT91C_MCI0_DTOR (AT91_CAST(AT91_REG *) 	0xFFF80008) // (MCI0) MCI Data Timeout Register
#define AT91C_MCI0_SDCR (AT91_CAST(AT91_REG *) 	0xFFF8000C) // (MCI0) MCI SD Card Register
#define AT91C_MCI0_BLKR (AT91_CAST(AT91_REG *) 	0xFFF80018) // (MCI0) MCI Block Register
#define AT91C_MCI0_VR   (AT91_CAST(AT91_REG *) 	0xFFF800FC) // (MCI0) MCI Version Register
#define AT91C_MCI0_TDR  (AT91_CAST(AT91_REG *) 	0xFFF80034) // (MCI0) MCI Transmit Data Register
#define AT91C_MCI0_ARGR (AT91_CAST(AT91_REG *) 	0xFFF80010) // (MCI0) MCI Argument Register
#define AT91C_MCI0_RSPR (AT91_CAST(AT91_REG *) 	0xFFF80020) // (MCI0) MCI Response Register
#define AT91C_MCI0_IDR  (AT91_CAST(AT91_REG *) 	0xFFF80048) // (MCI0) MCI Interrupt Disable Register
// ========== Register definition for PDC_MCI1 peripheral ========== 
#define AT91C_MCI1_PTCR (AT91_CAST(AT91_REG *) 	0xFFF84120) // (PDC_MCI1) PDC Transfer Control Register
#define AT91C_MCI1_PTSR (AT91_CAST(AT91_REG *) 	0xFFF84124) // (PDC_MCI1) PDC Transfer Status Register
#define AT91C_MCI1_TPR  (AT91_CAST(AT91_REG *) 	0xFFF84108) // (PDC_MCI1) Transmit Pointer Register
#define AT91C_MCI1_RPR  (AT91_CAST(AT91_REG *) 	0xFFF84100) // (PDC_MCI1) Receive Pointer Register
#define AT91C_MCI1_TNCR (AT91_CAST(AT91_REG *) 	0xFFF8411C) // (PDC_MCI1) Transmit Next Counter Register
#define AT91C_MCI1_RCR  (AT91_CAST(AT91_REG *) 	0xFFF84104) // (PDC_MCI1) Receive Counter Register
#define AT91C_MCI1_TNPR (AT91_CAST(AT91_REG *) 	0xFFF84118) // (PDC_MCI1) Transmit Next Pointer Register
#define AT91C_MCI1_TCR  (AT91_CAST(AT91_REG *) 	0xFFF8410C) // (PDC_MCI1) Transmit Counter Register
#define AT91C_MCI1_RNPR (AT91_CAST(AT91_REG *) 	0xFFF84110) // (PDC_MCI1) Receive Next Pointer Register
#define AT91C_MCI1_RNCR (AT91_CAST(AT91_REG *) 	0xFFF84114) // (PDC_MCI1) Receive Next Counter Register
// ========== Register definition for MCI1 peripheral ========== 
#define AT91C_MCI1_SR   (AT91_CAST(AT91_REG *) 	0xFFF84040) // (MCI1) MCI Status Register
#define AT91C_MCI1_RDR  (AT91_CAST(AT91_REG *) 	0xFFF84030) // (MCI1) MCI Receive Data Register
#define AT91C_MCI1_RSPR (AT91_CAST(AT91_REG *) 	0xFFF84020) // (MCI1) MCI Response Register
#define AT91C_MCI1_CMDR (AT91_CAST(AT91_REG *) 	0xFFF84014) // (MCI1) MCI Command Register
#define AT91C_MCI1_IMR  (AT91_CAST(AT91_REG *) 	0xFFF8404C) // (MCI1) MCI Interrupt Mask Register
#define AT91C_MCI1_DTOR (AT91_CAST(AT91_REG *) 	0xFFF84008) // (MCI1) MCI Data Timeout Register
#define AT91C_MCI1_SDCR (AT91_CAST(AT91_REG *) 	0xFFF8400C) // (MCI1) MCI SD Card Register
#define AT91C_MCI1_IDR  (AT91_CAST(AT91_REG *) 	0xFFF84048) // (MCI1) MCI Interrupt Disable Register
#define AT91C_MCI1_ARGR (AT91_CAST(AT91_REG *) 	0xFFF84010) // (MCI1) MCI Argument Register
#define AT91C_MCI1_TDR  (AT91_CAST(AT91_REG *) 	0xFFF84034) // (MCI1) MCI Transmit Data Register
#define AT91C_MCI1_BLKR (AT91_CAST(AT91_REG *) 	0xFFF84018) // (MCI1) MCI Block Register
#define AT91C_MCI1_VR   (AT91_CAST(AT91_REG *) 	0xFFF840FC) // (MCI1) MCI Version Register
#define AT91C_MCI1_CR   (AT91_CAST(AT91_REG *) 	0xFFF84000) // (MCI1) MCI Control Register
#define AT91C_MCI1_MR   (AT91_CAST(AT91_REG *) 	0xFFF84004) // (MCI1) MCI Mode Register
#define AT91C_MCI1_IER  (AT91_CAST(AT91_REG *) 	0xFFF84044) // (MCI1) MCI Interrupt Enable Register
// ========== Register definition for TWI peripheral ========== 
#define AT91C_TWI_VER   (AT91_CAST(AT91_REG *) 	0xFFF880FC) // (TWI) Version Register
#define AT91C_TWI_IMR   (AT91_CAST(AT91_REG *) 	0xFFF8802C) // (TWI) Interrupt Mask Register
#define AT91C_TWI_THR   (AT91_CAST(AT91_REG *) 	0xFFF88034) // (TWI) Transmit Holding Register
#define AT91C_TWI_IER   (AT91_CAST(AT91_REG *) 	0xFFF88024) // (TWI) Interrupt Enable Register
#define AT91C_TWI_MMR   (AT91_CAST(AT91_REG *) 	0xFFF88004) // (TWI) Master Mode Register
#define AT91C_TWI_IPNAME1 (AT91_CAST(AT91_REG *) 	0xFFF880F0) // (TWI) TWI IPNAME1 REGISTER 
#define AT91C_TWI_CR    (AT91_CAST(AT91_REG *) 	0xFFF88000) // (TWI) Control Register
#define AT91C_TWI_SR    (AT91_CAST(AT91_REG *) 	0xFFF88020) // (TWI) Status Register
#define AT91C_TWI_CWGR  (AT91_CAST(AT91_REG *) 	0xFFF88010) // (TWI) Clock Waveform Generator Register
#define AT91C_TWI_IPNAME2 (AT91_CAST(AT91_REG *) 	0xFFF880F4) // (TWI) TWI IPNAME2 REGISTER 
#define AT91C_TWI_IDR   (AT91_CAST(AT91_REG *) 	0xFFF88028) // (TWI) Interrupt Disable Register
#define AT91C_TWI_RHR   (AT91_CAST(AT91_REG *) 	0xFFF88030) // (TWI) Receive Holding Register
#define AT91C_TWI_IADR  (AT91_CAST(AT91_REG *) 	0xFFF8800C) // (TWI) Internal Address Register
#define AT91C_TWI_SMR   (AT91_CAST(AT91_REG *) 	0xFFF88008) // (TWI) Slave Mode Register
#define AT91C_TWI_FEATURES (AT91_CAST(AT91_REG *) 	0xFFF880F8) // (TWI) TWI FEATURES REGISTER 
#define AT91C_TWI_ADDRSIZE (AT91_CAST(AT91_REG *) 	0xFFF880EC) // (TWI) TWI ADDRSIZE REGISTER 
// ========== Register definition for PDC_US0 peripheral ========== 
#define AT91C_US0_TNPR  (AT91_CAST(AT91_REG *) 	0xFFF8C118) // (PDC_US0) Transmit Next Pointer Register
#define AT91C_US0_PTSR  (AT91_CAST(AT91_REG *) 	0xFFF8C124) // (PDC_US0) PDC Transfer Status Register
#define AT91C_US0_PTCR  (AT91_CAST(AT91_REG *) 	0xFFF8C120) // (PDC_US0) PDC Transfer Control Register
#define AT91C_US0_RNCR  (AT91_CAST(AT91_REG *) 	0xFFF8C114) // (PDC_US0) Receive Next Counter Register
#define AT91C_US0_RCR   (AT91_CAST(AT91_REG *) 	0xFFF8C104) // (PDC_US0) Receive Counter Register
#define AT91C_US0_TNCR  (AT91_CAST(AT91_REG *) 	0xFFF8C11C) // (PDC_US0) Transmit Next Counter Register
#define AT91C_US0_TCR   (AT91_CAST(AT91_REG *) 	0xFFF8C10C) // (PDC_US0) Transmit Counter Register
#define AT91C_US0_RNPR  (AT91_CAST(AT91_REG *) 	0xFFF8C110) // (PDC_US0) Receive Next Pointer Register
#define AT91C_US0_RPR   (AT91_CAST(AT91_REG *) 	0xFFF8C100) // (PDC_US0) Receive Pointer Register
#define AT91C_US0_TPR   (AT91_CAST(AT91_REG *) 	0xFFF8C108) // (PDC_US0) Transmit Pointer Register
// ========== Register definition for US0 peripheral ========== 
#define AT91C_US0_RTOR  (AT91_CAST(AT91_REG *) 	0xFFF8C024) // (US0) Receiver Time-out Register
#define AT91C_US0_NER   (AT91_CAST(AT91_REG *) 	0xFFF8C044) // (US0) Nb Errors Register
#define AT91C_US0_THR   (AT91_CAST(AT91_REG *) 	0xFFF8C01C) // (US0) Transmitter Holding Register
#define AT91C_US0_MR    (AT91_CAST(AT91_REG *) 	0xFFF8C004) // (US0) Mode Register
#define AT91C_US0_RHR   (AT91_CAST(AT91_REG *) 	0xFFF8C018) // (US0) Receiver Holding Register
#define AT91C_US0_CSR   (AT91_CAST(AT91_REG *) 	0xFFF8C014) // (US0) Channel Status Register
#define AT91C_US0_IMR   (AT91_CAST(AT91_REG *) 	0xFFF8C010) // (US0) Interrupt Mask Register
#define AT91C_US0_IDR   (AT91_CAST(AT91_REG *) 	0xFFF8C00C) // (US0) Interrupt Disable Register
#define AT91C_US0_FIDI  (AT91_CAST(AT91_REG *) 	0xFFF8C040) // (US0) FI_DI_Ratio Register
#define AT91C_US0_CR    (AT91_CAST(AT91_REG *) 	0xFFF8C000) // (US0) Control Register
#define AT91C_US0_IER   (AT91_CAST(AT91_REG *) 	0xFFF8C008) // (US0) Interrupt Enable Register
#define AT91C_US0_TTGR  (AT91_CAST(AT91_REG *) 	0xFFF8C028) // (US0) Transmitter Time-guard Register
#define AT91C_US0_BRGR  (AT91_CAST(AT91_REG *) 	0xFFF8C020) // (US0) Baud Rate Generator Register
#define AT91C_US0_IF    (AT91_CAST(AT91_REG *) 	0xFFF8C04C) // (US0) IRDA_FILTER Register
// ========== Register definition for PDC_US1 peripheral ========== 
#define AT91C_US1_PTCR  (AT91_CAST(AT91_REG *) 	0xFFF90120) // (PDC_US1) PDC Transfer Control Register
#define AT91C_US1_TNCR  (AT91_CAST(AT91_REG *) 	0xFFF9011C) // (PDC_US1) Transmit Next Counter Register
#define AT91C_US1_RCR   (AT91_CAST(AT91_REG *) 	0xFFF90104) // (PDC_US1) Receive Counter Register
#define AT91C_US1_RPR   (AT91_CAST(AT91_REG *) 	0xFFF90100) // (PDC_US1) Receive Pointer Register
#define AT91C_US1_TPR   (AT91_CAST(AT91_REG *) 	0xFFF90108) // (PDC_US1) Transmit Pointer Register
#define AT91C_US1_TCR   (AT91_CAST(AT91_REG *) 	0xFFF9010C) // (PDC_US1) Transmit Counter Register
#define AT91C_US1_RNPR  (AT91_CAST(AT91_REG *) 	0xFFF90110) // (PDC_US1) Receive Next Pointer Register
#define AT91C_US1_TNPR  (AT91_CAST(AT91_REG *) 	0xFFF90118) // (PDC_US1) Transmit Next Pointer Register
#define AT91C_US1_RNCR  (AT91_CAST(AT91_REG *) 	0xFFF90114) // (PDC_US1) Receive Next Counter Register
#define AT91C_US1_PTSR  (AT91_CAST(AT91_REG *) 	0xFFF90124) // (PDC_US1) PDC Transfer Status Register
// ========== Register definition for US1 peripheral ========== 
#define AT91C_US1_NER   (AT91_CAST(AT91_REG *) 	0xFFF90044) // (US1) Nb Errors Register
#define AT91C_US1_RHR   (AT91_CAST(AT91_REG *) 	0xFFF90018) // (US1) Receiver Holding Register
#define AT91C_US1_RTOR  (AT91_CAST(AT91_REG *) 	0xFFF90024) // (US1) Receiver Time-out Register
#define AT91C_US1_IER   (AT91_CAST(AT91_REG *) 	0xFFF90008) // (US1) Interrupt Enable Register
#define AT91C_US1_IF    (AT91_CAST(AT91_REG *) 	0xFFF9004C) // (US1) IRDA_FILTER Register
#define AT91C_US1_CR    (AT91_CAST(AT91_REG *) 	0xFFF90000) // (US1) Control Register
#define AT91C_US1_IMR   (AT91_CAST(AT91_REG *) 	0xFFF90010) // (US1) Interrupt Mask Register
#define AT91C_US1_TTGR  (AT91_CAST(AT91_REG *) 	0xFFF90028) // (US1) Transmitter Time-guard Register
#define AT91C_US1_MR    (AT91_CAST(AT91_REG *) 	0xFFF90004) // (US1) Mode Register
#define AT91C_US1_IDR   (AT91_CAST(AT91_REG *) 	0xFFF9000C) // (US1) Interrupt Disable Register
#define AT91C_US1_FIDI  (AT91_CAST(AT91_REG *) 	0xFFF90040) // (US1) FI_DI_Ratio Register
#define AT91C_US1_CSR   (AT91_CAST(AT91_REG *) 	0xFFF90014) // (US1) Channel Status Register
#define AT91C_US1_THR   (AT91_CAST(AT91_REG *) 	0xFFF9001C) // (US1) Transmitter Holding Register
#define AT91C_US1_BRGR  (AT91_CAST(AT91_REG *) 	0xFFF90020) // (US1) Baud Rate Generator Register
// ========== Register definition for PDC_US2 peripheral ========== 
#define AT91C_US2_RNCR  (AT91_CAST(AT91_REG *) 	0xFFF94114) // (PDC_US2) Receive Next Counter Register
#define AT91C_US2_PTCR  (AT91_CAST(AT91_REG *) 	0xFFF94120) // (PDC_US2) PDC Transfer Control Register
#define AT91C_US2_TNPR  (AT91_CAST(AT91_REG *) 	0xFFF94118) // (PDC_US2) Transmit Next Pointer Register
#define AT91C_US2_TNCR  (AT91_CAST(AT91_REG *) 	0xFFF9411C) // (PDC_US2) Transmit Next Counter Register
#define AT91C_US2_TPR   (AT91_CAST(AT91_REG *) 	0xFFF94108) // (PDC_US2) Transmit Pointer Register
#define AT91C_US2_RCR   (AT91_CAST(AT91_REG *) 	0xFFF94104) // (PDC_US2) Receive Counter Register
#define AT91C_US2_PTSR  (AT91_CAST(AT91_REG *) 	0xFFF94124) // (PDC_US2) PDC Transfer Status Register
#define AT91C_US2_TCR   (AT91_CAST(AT91_REG *) 	0xFFF9410C) // (PDC_US2) Transmit Counter Register
#define AT91C_US2_RPR   (AT91_CAST(AT91_REG *) 	0xFFF94100) // (PDC_US2) Receive Pointer Register
#define AT91C_US2_RNPR  (AT91_CAST(AT91_REG *) 	0xFFF94110) // (PDC_US2) Receive Next Pointer Register
// ========== Register definition for US2 peripheral ========== 
#define AT91C_US2_TTGR  (AT91_CAST(AT91_REG *) 	0xFFF94028) // (US2) Transmitter Time-guard Register
#define AT91C_US2_RHR   (AT91_CAST(AT91_REG *) 	0xFFF94018) // (US2) Receiver Holding Register
#define AT91C_US2_IMR   (AT91_CAST(AT91_REG *) 	0xFFF94010) // (US2) Interrupt Mask Register
#define AT91C_US2_IER   (AT91_CAST(AT91_REG *) 	0xFFF94008) // (US2) Interrupt Enable Register
#define AT91C_US2_NER   (AT91_CAST(AT91_REG *) 	0xFFF94044) // (US2) Nb Errors Register
#define AT91C_US2_CR    (AT91_CAST(AT91_REG *) 	0xFFF94000) // (US2) Control Register
#define AT91C_US2_FIDI  (AT91_CAST(AT91_REG *) 	0xFFF94040) // (US2) FI_DI_Ratio Register
#define AT91C_US2_MR    (AT91_CAST(AT91_REG *) 	0xFFF94004) // (US2) Mode Register
#define AT91C_US2_IDR   (AT91_CAST(AT91_REG *) 	0xFFF9400C) // (US2) Interrupt Disable Register
#define AT91C_US2_THR   (AT91_CAST(AT91_REG *) 	0xFFF9401C) // (US2) Transmitter Holding Register
#define AT91C_US2_IF    (AT91_CAST(AT91_REG *) 	0xFFF9404C) // (US2) IRDA_FILTER Register
#define AT91C_US2_BRGR  (AT91_CAST(AT91_REG *) 	0xFFF94020) // (US2) Baud Rate Generator Register
#define AT91C_US2_CSR   (AT91_CAST(AT91_REG *) 	0xFFF94014) // (US2) Channel Status Register
#define AT91C_US2_RTOR  (AT91_CAST(AT91_REG *) 	0xFFF94024) // (US2) Receiver Time-out Register
// ========== Register definition for PDC_SSC0 peripheral ========== 
#define AT91C_SSC0_PTSR (AT91_CAST(AT91_REG *) 	0xFFF98124) // (PDC_SSC0) PDC Transfer Status Register
#define AT91C_SSC0_TCR  (AT91_CAST(AT91_REG *) 	0xFFF9810C) // (PDC_SSC0) Transmit Counter Register
#define AT91C_SSC0_RNPR (AT91_CAST(AT91_REG *) 	0xFFF98110) // (PDC_SSC0) Receive Next Pointer Register
#define AT91C_SSC0_RNCR (AT91_CAST(AT91_REG *) 	0xFFF98114) // (PDC_SSC0) Receive Next Counter Register
#define AT91C_SSC0_TNPR (AT91_CAST(AT91_REG *) 	0xFFF98118) // (PDC_SSC0) Transmit Next Pointer Register
#define AT91C_SSC0_RPR  (AT91_CAST(AT91_REG *) 	0xFFF98100) // (PDC_SSC0) Receive Pointer Register
#define AT91C_SSC0_TPR  (AT91_CAST(AT91_REG *) 	0xFFF98108) // (PDC_SSC0) Transmit Pointer Register
#define AT91C_SSC0_RCR  (AT91_CAST(AT91_REG *) 	0xFFF98104) // (PDC_SSC0) Receive Counter Register
#define AT91C_SSC0_TNCR (AT91_CAST(AT91_REG *) 	0xFFF9811C) // (PDC_SSC0) Transmit Next Counter Register
#define AT91C_SSC0_PTCR (AT91_CAST(AT91_REG *) 	0xFFF98120) // (PDC_SSC0) PDC Transfer Control Register
// ========== Register definition for SSC0 peripheral ========== 
#define AT91C_SSC0_RFMR (AT91_CAST(AT91_REG *) 	0xFFF98014) // (SSC0) Receive Frame Mode Register
#define AT91C_SSC0_RHR  (AT91_CAST(AT91_REG *) 	0xFFF98020) // (SSC0) Receive Holding Register
#define AT91C_SSC0_THR  (AT91_CAST(AT91_REG *) 	0xFFF98024) // (SSC0) Transmit Holding Register
#define AT91C_SSC0_CMR  (AT91_CAST(AT91_REG *) 	0xFFF98004) // (SSC0) Clock Mode Register
#define AT91C_SSC0_IMR  (AT91_CAST(AT91_REG *) 	0xFFF9804C) // (SSC0) Interrupt Mask Register
#define AT91C_SSC0_IDR  (AT91_CAST(AT91_REG *) 	0xFFF98048) // (SSC0) Interrupt Disable Register
#define AT91C_SSC0_IER  (AT91_CAST(AT91_REG *) 	0xFFF98044) // (SSC0) Interrupt Enable Register
#define AT91C_SSC0_TSHR (AT91_CAST(AT91_REG *) 	0xFFF98034) // (SSC0) Transmit Sync Holding Register
#define AT91C_SSC0_SR   (AT91_CAST(AT91_REG *) 	0xFFF98040) // (SSC0) Status Register
#define AT91C_SSC0_CR   (AT91_CAST(AT91_REG *) 	0xFFF98000) // (SSC0) Control Register
#define AT91C_SSC0_RCMR (AT91_CAST(AT91_REG *) 	0xFFF98010) // (SSC0) Receive Clock ModeRegister
#define AT91C_SSC0_TFMR (AT91_CAST(AT91_REG *) 	0xFFF9801C) // (SSC0) Transmit Frame Mode Register
#define AT91C_SSC0_RSHR (AT91_CAST(AT91_REG *) 	0xFFF98030) // (SSC0) Receive Sync Holding Register
#define AT91C_SSC0_TCMR (AT91_CAST(AT91_REG *) 	0xFFF98018) // (SSC0) Transmit Clock Mode Register
// ========== Register definition for PDC_SSC1 peripheral ========== 
#define AT91C_SSC1_TNPR (AT91_CAST(AT91_REG *) 	0xFFF9C118) // (PDC_SSC1) Transmit Next Pointer Register
#define AT91C_SSC1_PTSR (AT91_CAST(AT91_REG *) 	0xFFF9C124) // (PDC_SSC1) PDC Transfer Status Register
#define AT91C_SSC1_TNCR (AT91_CAST(AT91_REG *) 	0xFFF9C11C) // (PDC_SSC1) Transmit Next Counter Register
#define AT91C_SSC1_RNCR (AT91_CAST(AT91_REG *) 	0xFFF9C114) // (PDC_SSC1) Receive Next Counter Register
#define AT91C_SSC1_TPR  (AT91_CAST(AT91_REG *) 	0xFFF9C108) // (PDC_SSC1) Transmit Pointer Register
#define AT91C_SSC1_RCR  (AT91_CAST(AT91_REG *) 	0xFFF9C104) // (PDC_SSC1) Receive Counter Register
#define AT91C_SSC1_PTCR (AT91_CAST(AT91_REG *) 	0xFFF9C120) // (PDC_SSC1) PDC Transfer Control Register
#define AT91C_SSC1_RNPR (AT91_CAST(AT91_REG *) 	0xFFF9C110) // (PDC_SSC1) Receive Next Pointer Register
#define AT91C_SSC1_TCR  (AT91_CAST(AT91_REG *) 	0xFFF9C10C) // (PDC_SSC1) Transmit Counter Register
#define AT91C_SSC1_RPR  (AT91_CAST(AT91_REG *) 	0xFFF9C100) // (PDC_SSC1) Receive Pointer Register
// ========== Register definition for SSC1 peripheral ========== 
#define AT91C_SSC1_CMR  (AT91_CAST(AT91_REG *) 	0xFFF9C004) // (SSC1) Clock Mode Register
#define AT91C_SSC1_SR   (AT91_CAST(AT91_REG *) 	0xFFF9C040) // (SSC1) Status Register
#define AT91C_SSC1_TSHR (AT91_CAST(AT91_REG *) 	0xFFF9C034) // (SSC1) Transmit Sync Holding Register
#define AT91C_SSC1_TCMR (AT91_CAST(AT91_REG *) 	0xFFF9C018) // (SSC1) Transmit Clock Mode Register
#define AT91C_SSC1_IMR  (AT91_CAST(AT91_REG *) 	0xFFF9C04C) // (SSC1) Interrupt Mask Register
#define AT91C_SSC1_IDR  (AT91_CAST(AT91_REG *) 	0xFFF9C048) // (SSC1) Interrupt Disable Register
#define AT91C_SSC1_RCMR (AT91_CAST(AT91_REG *) 	0xFFF9C010) // (SSC1) Receive Clock ModeRegister
#define AT91C_SSC1_IER  (AT91_CAST(AT91_REG *) 	0xFFF9C044) // (SSC1) Interrupt Enable Register
#define AT91C_SSC1_RSHR (AT91_CAST(AT91_REG *) 	0xFFF9C030) // (SSC1) Receive Sync Holding Register
#define AT91C_SSC1_CR   (AT91_CAST(AT91_REG *) 	0xFFF9C000) // (SSC1) Control Register
#define AT91C_SSC1_RHR  (AT91_CAST(AT91_REG *) 	0xFFF9C020) // (SSC1) Receive Holding Register
#define AT91C_SSC1_THR  (AT91_CAST(AT91_REG *) 	0xFFF9C024) // (SSC1) Transmit Holding Register
#define AT91C_SSC1_RFMR (AT91_CAST(AT91_REG *) 	0xFFF9C014) // (SSC1) Receive Frame Mode Register
#define AT91C_SSC1_TFMR (AT91_CAST(AT91_REG *) 	0xFFF9C01C) // (SSC1) Transmit Frame Mode Register
// ========== Register definition for PDC_AC97C peripheral ========== 
#define AT91C_AC97C_RNPR (AT91_CAST(AT91_REG *) 	0xFFFA0110) // (PDC_AC97C) Receive Next Pointer Register
#define AT91C_AC97C_TCR (AT91_CAST(AT91_REG *) 	0xFFFA010C) // (PDC_AC97C) Transmit Counter Register
#define AT91C_AC97C_TNCR (AT91_CAST(AT91_REG *) 	0xFFFA011C) // (PDC_AC97C) Transmit Next Counter Register
#define AT91C_AC97C_RCR (AT91_CAST(AT91_REG *) 	0xFFFA0104) // (PDC_AC97C) Receive Counter Register
#define AT91C_AC97C_RNCR (AT91_CAST(AT91_REG *) 	0xFFFA0114) // (PDC_AC97C) Receive Next Counter Register
#define AT91C_AC97C_PTCR (AT91_CAST(AT91_REG *) 	0xFFFA0120) // (PDC_AC97C) PDC Transfer Control Register
#define AT91C_AC97C_TPR (AT91_CAST(AT91_REG *) 	0xFFFA0108) // (PDC_AC97C) Transmit Pointer Register
#define AT91C_AC97C_RPR (AT91_CAST(AT91_REG *) 	0xFFFA0100) // (PDC_AC97C) Receive Pointer Register
#define AT91C_AC97C_PTSR (AT91_CAST(AT91_REG *) 	0xFFFA0124) // (PDC_AC97C) PDC Transfer Status Register
#define AT91C_AC97C_TNPR (AT91_CAST(AT91_REG *) 	0xFFFA0118) // (PDC_AC97C) Transmit Next Pointer Register
// ========== Register definition for AC97C peripheral ========== 
#define AT91C_AC97C_CORHR (AT91_CAST(AT91_REG *) 	0xFFFA0040) // (AC97C) COdec Transmit Holding Register
#define AT91C_AC97C_MR  (AT91_CAST(AT91_REG *) 	0xFFFA0008) // (AC97C) Mode Register
#define AT91C_AC97C_CATHR (AT91_CAST(AT91_REG *) 	0xFFFA0024) // (AC97C) Channel A Transmit Holding Register
#define AT91C_AC97C_IER (AT91_CAST(AT91_REG *) 	0xFFFA0054) // (AC97C) Interrupt Enable Register
#define AT91C_AC97C_CASR (AT91_CAST(AT91_REG *) 	0xFFFA0028) // (AC97C) Channel A Status Register
#define AT91C_AC97C_CBTHR (AT91_CAST(AT91_REG *) 	0xFFFA0034) // (AC97C) Channel B Transmit Holding Register (optional)
#define AT91C_AC97C_ICA (AT91_CAST(AT91_REG *) 	0xFFFA0010) // (AC97C) Input Channel AssignementRegister
#define AT91C_AC97C_IMR (AT91_CAST(AT91_REG *) 	0xFFFA005C) // (AC97C) Interrupt Mask Register
#define AT91C_AC97C_IDR (AT91_CAST(AT91_REG *) 	0xFFFA0058) // (AC97C) Interrupt Disable Register
#define AT91C_AC97C_CARHR (AT91_CAST(AT91_REG *) 	0xFFFA0020) // (AC97C) Channel A Receive Holding Register
#define AT91C_AC97C_VERSION (AT91_CAST(AT91_REG *) 	0xFFFA00FC) // (AC97C) Version Register
#define AT91C_AC97C_CBRHR (AT91_CAST(AT91_REG *) 	0xFFFA0030) // (AC97C) Channel B Receive Holding Register (optional)
#define AT91C_AC97C_COTHR (AT91_CAST(AT91_REG *) 	0xFFFA0044) // (AC97C) COdec Transmit Holding Register
#define AT91C_AC97C_OCA (AT91_CAST(AT91_REG *) 	0xFFFA0014) // (AC97C) Output Channel Assignement Register
#define AT91C_AC97C_CBMR (AT91_CAST(AT91_REG *) 	0xFFFA003C) // (AC97C) Channel B Mode Register
#define AT91C_AC97C_COMR (AT91_CAST(AT91_REG *) 	0xFFFA004C) // (AC97C) CODEC Mask Status Register
#define AT91C_AC97C_CBSR (AT91_CAST(AT91_REG *) 	0xFFFA0038) // (AC97C) Channel B Status Register
#define AT91C_AC97C_COSR (AT91_CAST(AT91_REG *) 	0xFFFA0048) // (AC97C) CODEC Status Register
#define AT91C_AC97C_CAMR (AT91_CAST(AT91_REG *) 	0xFFFA002C) // (AC97C) Channel A Mode Register
#define AT91C_AC97C_SR  (AT91_CAST(AT91_REG *) 	0xFFFA0050) // (AC97C) Status Register
// ========== Register definition for PDC_SPI0 peripheral ========== 
#define AT91C_SPI0_TPR  (AT91_CAST(AT91_REG *) 	0xFFFA4108) // (PDC_SPI0) Transmit Pointer Register
#define AT91C_SPI0_PTCR (AT91_CAST(AT91_REG *) 	0xFFFA4120) // (PDC_SPI0) PDC Transfer Control Register
#define AT91C_SPI0_RNPR (AT91_CAST(AT91_REG *) 	0xFFFA4110) // (PDC_SPI0) Receive Next Pointer Register
#define AT91C_SPI0_TNCR (AT91_CAST(AT91_REG *) 	0xFFFA411C) // (PDC_SPI0) Transmit Next Counter Register
#define AT91C_SPI0_TCR  (AT91_CAST(AT91_REG *) 	0xFFFA410C) // (PDC_SPI0) Transmit Counter Register
#define AT91C_SPI0_RCR  (AT91_CAST(AT91_REG *) 	0xFFFA4104) // (PDC_SPI0) Receive Counter Register
#define AT91C_SPI0_RNCR (AT91_CAST(AT91_REG *) 	0xFFFA4114) // (PDC_SPI0) Receive Next Counter Register
#define AT91C_SPI0_TNPR (AT91_CAST(AT91_REG *) 	0xFFFA4118) // (PDC_SPI0) Transmit Next Pointer Register
#define AT91C_SPI0_RPR  (AT91_CAST(AT91_REG *) 	0xFFFA4100) // (PDC_SPI0) Receive Pointer Register
#define AT91C_SPI0_PTSR (AT91_CAST(AT91_REG *) 	0xFFFA4124) // (PDC_SPI0) PDC Transfer Status Register
// ========== Register definition for SPI0 peripheral ========== 
#define AT91C_SPI0_MR   (AT91_CAST(AT91_REG *) 	0xFFFA4004) // (SPI0) Mode Register
#define AT91C_SPI0_RDR  (AT91_CAST(AT91_REG *) 	0xFFFA4008) // (SPI0) Receive Data Register
#define AT91C_SPI0_CR   (AT91_CAST(AT91_REG *) 	0xFFFA4000) // (SPI0) Control Register
#define AT91C_SPI0_IER  (AT91_CAST(AT91_REG *) 	0xFFFA4014) // (SPI0) Interrupt Enable Register
#define AT91C_SPI0_TDR  (AT91_CAST(AT91_REG *) 	0xFFFA400C) // (SPI0) Transmit Data Register
#define AT91C_SPI0_IDR  (AT91_CAST(AT91_REG *) 	0xFFFA4018) // (SPI0) Interrupt Disable Register
#define AT91C_SPI0_CSR  (AT91_CAST(AT91_REG *) 	0xFFFA4030) // (SPI0) Chip Select Register
#define AT91C_SPI0_SR   (AT91_CAST(AT91_REG *) 	0xFFFA4010) // (SPI0) Status Register
#define AT91C_SPI0_IMR  (AT91_CAST(AT91_REG *) 	0xFFFA401C) // (SPI0) Interrupt Mask Register
// ========== Register definition for PDC_SPI1 peripheral ========== 
#define AT91C_SPI1_RNCR (AT91_CAST(AT91_REG *) 	0xFFFA8114) // (PDC_SPI1) Receive Next Counter Register
#define AT91C_SPI1_TCR  (AT91_CAST(AT91_REG *) 	0xFFFA810C) // (PDC_SPI1) Transmit Counter Register
#define AT91C_SPI1_RCR  (AT91_CAST(AT91_REG *) 	0xFFFA8104) // (PDC_SPI1) Receive Counter Register
#define AT91C_SPI1_TNPR (AT91_CAST(AT91_REG *) 	0xFFFA8118) // (PDC_SPI1) Transmit Next Pointer Register
#define AT91C_SPI1_RNPR (AT91_CAST(AT91_REG *) 	0xFFFA8110) // (PDC_SPI1) Receive Next Pointer Register
#define AT91C_SPI1_RPR  (AT91_CAST(AT91_REG *) 	0xFFFA8100) // (PDC_SPI1) Receive Pointer Register
#define AT91C_SPI1_TNCR (AT91_CAST(AT91_REG *) 	0xFFFA811C) // (PDC_SPI1) Transmit Next Counter Register
#define AT91C_SPI1_TPR  (AT91_CAST(AT91_REG *) 	0xFFFA8108) // (PDC_SPI1) Transmit Pointer Register
#define AT91C_SPI1_PTSR (AT91_CAST(AT91_REG *) 	0xFFFA8124) // (PDC_SPI1) PDC Transfer Status Register
#define AT91C_SPI1_PTCR (AT91_CAST(AT91_REG *) 	0xFFFA8120) // (PDC_SPI1) PDC Transfer Control Register
// ========== Register definition for SPI1 peripheral ========== 
#define AT91C_SPI1_CSR  (AT91_CAST(AT91_REG *) 	0xFFFA8030) // (SPI1) Chip Select Register
#define AT91C_SPI1_IER  (AT91_CAST(AT91_REG *) 	0xFFFA8014) // (SPI1) Interrupt Enable Register
#define AT91C_SPI1_RDR  (AT91_CAST(AT91_REG *) 	0xFFFA8008) // (SPI1) Receive Data Register
#define AT91C_SPI1_IDR  (AT91_CAST(AT91_REG *) 	0xFFFA8018) // (SPI1) Interrupt Disable Register
#define AT91C_SPI1_MR   (AT91_CAST(AT91_REG *) 	0xFFFA8004) // (SPI1) Mode Register
#define AT91C_SPI1_CR   (AT91_CAST(AT91_REG *) 	0xFFFA8000) // (SPI1) Control Register
#define AT91C_SPI1_SR   (AT91_CAST(AT91_REG *) 	0xFFFA8010) // (SPI1) Status Register
#define AT91C_SPI1_TDR  (AT91_CAST(AT91_REG *) 	0xFFFA800C) // (SPI1) Transmit Data Register
#define AT91C_SPI1_IMR  (AT91_CAST(AT91_REG *) 	0xFFFA801C) // (SPI1) Interrupt Mask Register
// ========== Register definition for CAN_MB0 peripheral ========== 
#define AT91C_CAN_MB0_MID (AT91_CAST(AT91_REG *) 	0xFFFAC208) // (CAN_MB0) MailBox ID Register
#define AT91C_CAN_MB0_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC20C) // (CAN_MB0) MailBox Family ID Register
#define AT91C_CAN_MB0_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC204) // (CAN_MB0) MailBox Acceptance Mask Register
#define AT91C_CAN_MB0_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC21C) // (CAN_MB0) MailBox Control Register
#define AT91C_CAN_MB0_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC200) // (CAN_MB0) MailBox Mode Register
#define AT91C_CAN_MB0_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC214) // (CAN_MB0) MailBox Data Low Register
#define AT91C_CAN_MB0_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC218) // (CAN_MB0) MailBox Data High Register
#define AT91C_CAN_MB0_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC210) // (CAN_MB0) MailBox Status Register
// ========== Register definition for CAN_MB1 peripheral ========== 
#define AT91C_CAN_MB1_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC234) // (CAN_MB1) MailBox Data Low Register
#define AT91C_CAN_MB1_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC224) // (CAN_MB1) MailBox Acceptance Mask Register
#define AT91C_CAN_MB1_MID (AT91_CAST(AT91_REG *) 	0xFFFAC228) // (CAN_MB1) MailBox ID Register
#define AT91C_CAN_MB1_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC220) // (CAN_MB1) MailBox Mode Register
#define AT91C_CAN_MB1_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC23C) // (CAN_MB1) MailBox Control Register
#define AT91C_CAN_MB1_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC22C) // (CAN_MB1) MailBox Family ID Register
#define AT91C_CAN_MB1_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC230) // (CAN_MB1) MailBox Status Register
#define AT91C_CAN_MB1_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC238) // (CAN_MB1) MailBox Data High Register
// ========== Register definition for CAN_MB2 peripheral ========== 
#define AT91C_CAN_MB2_MID (AT91_CAST(AT91_REG *) 	0xFFFAC248) // (CAN_MB2) MailBox ID Register
#define AT91C_CAN_MB2_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC250) // (CAN_MB2) MailBox Status Register
#define AT91C_CAN_MB2_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC254) // (CAN_MB2) MailBox Data Low Register
#define AT91C_CAN_MB2_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC25C) // (CAN_MB2) MailBox Control Register
#define AT91C_CAN_MB2_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC258) // (CAN_MB2) MailBox Data High Register
#define AT91C_CAN_MB2_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC244) // (CAN_MB2) MailBox Acceptance Mask Register
#define AT91C_CAN_MB2_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC240) // (CAN_MB2) MailBox Mode Register
#define AT91C_CAN_MB2_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC24C) // (CAN_MB2) MailBox Family ID Register
// ========== Register definition for CAN_MB3 peripheral ========== 
#define AT91C_CAN_MB3_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC274) // (CAN_MB3) MailBox Data Low Register
#define AT91C_CAN_MB3_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC26C) // (CAN_MB3) MailBox Family ID Register
#define AT91C_CAN_MB3_MID (AT91_CAST(AT91_REG *) 	0xFFFAC268) // (CAN_MB3) MailBox ID Register
#define AT91C_CAN_MB3_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC278) // (CAN_MB3) MailBox Data High Register
#define AT91C_CAN_MB3_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC264) // (CAN_MB3) MailBox Acceptance Mask Register
#define AT91C_CAN_MB3_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC260) // (CAN_MB3) MailBox Mode Register
#define AT91C_CAN_MB3_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC27C) // (CAN_MB3) MailBox Control Register
#define AT91C_CAN_MB3_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC270) // (CAN_MB3) MailBox Status Register
// ========== Register definition for CAN_MB4 peripheral ========== 
#define AT91C_CAN_MB4_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC29C) // (CAN_MB4) MailBox Control Register
#define AT91C_CAN_MB4_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC298) // (CAN_MB4) MailBox Data High Register
#define AT91C_CAN_MB4_MID (AT91_CAST(AT91_REG *) 	0xFFFAC288) // (CAN_MB4) MailBox ID Register
#define AT91C_CAN_MB4_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC280) // (CAN_MB4) MailBox Mode Register
#define AT91C_CAN_MB4_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC290) // (CAN_MB4) MailBox Status Register
#define AT91C_CAN_MB4_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC28C) // (CAN_MB4) MailBox Family ID Register
#define AT91C_CAN_MB4_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC284) // (CAN_MB4) MailBox Acceptance Mask Register
#define AT91C_CAN_MB4_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC294) // (CAN_MB4) MailBox Data Low Register
// ========== Register definition for CAN_MB5 peripheral ========== 
#define AT91C_CAN_MB5_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC2B8) // (CAN_MB5) MailBox Data High Register
#define AT91C_CAN_MB5_MID (AT91_CAST(AT91_REG *) 	0xFFFAC2A8) // (CAN_MB5) MailBox ID Register
#define AT91C_CAN_MB5_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC2BC) // (CAN_MB5) MailBox Control Register
#define AT91C_CAN_MB5_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC2B0) // (CAN_MB5) MailBox Status Register
#define AT91C_CAN_MB5_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC2B4) // (CAN_MB5) MailBox Data Low Register
#define AT91C_CAN_MB5_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC2A0) // (CAN_MB5) MailBox Mode Register
#define AT91C_CAN_MB5_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC2A4) // (CAN_MB5) MailBox Acceptance Mask Register
#define AT91C_CAN_MB5_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC2AC) // (CAN_MB5) MailBox Family ID Register
// ========== Register definition for CAN_MB6 peripheral ========== 
#define AT91C_CAN_MB6_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC2D0) // (CAN_MB6) MailBox Status Register
#define AT91C_CAN_MB6_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC2C0) // (CAN_MB6) MailBox Mode Register
#define AT91C_CAN_MB6_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC2CC) // (CAN_MB6) MailBox Family ID Register
#define AT91C_CAN_MB6_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC2D4) // (CAN_MB6) MailBox Data Low Register
#define AT91C_CAN_MB6_MID (AT91_CAST(AT91_REG *) 	0xFFFAC2C8) // (CAN_MB6) MailBox ID Register
#define AT91C_CAN_MB6_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC2DC) // (CAN_MB6) MailBox Control Register
#define AT91C_CAN_MB6_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC2C4) // (CAN_MB6) MailBox Acceptance Mask Register
#define AT91C_CAN_MB6_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC2D8) // (CAN_MB6) MailBox Data High Register
// ========== Register definition for CAN_MB7 peripheral ========== 
#define AT91C_CAN_MB7_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC2E4) // (CAN_MB7) MailBox Acceptance Mask Register
#define AT91C_CAN_MB7_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC2F8) // (CAN_MB7) MailBox Data High Register
#define AT91C_CAN_MB7_MID (AT91_CAST(AT91_REG *) 	0xFFFAC2E8) // (CAN_MB7) MailBox ID Register
#define AT91C_CAN_MB7_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC2F0) // (CAN_MB7) MailBox Status Register
#define AT91C_CAN_MB7_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC2E0) // (CAN_MB7) MailBox Mode Register
#define AT91C_CAN_MB7_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC2FC) // (CAN_MB7) MailBox Control Register
#define AT91C_CAN_MB7_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC2EC) // (CAN_MB7) MailBox Family ID Register
#define AT91C_CAN_MB7_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC2F4) // (CAN_MB7) MailBox Data Low Register
// ========== Register definition for CAN_MB8 peripheral ========== 
#define AT91C_CAN_MB8_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC318) // (CAN_MB8) MailBox Data High Register
#define AT91C_CAN_MB8_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC300) // (CAN_MB8) MailBox Mode Register
#define AT91C_CAN_MB8_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC31C) // (CAN_MB8) MailBox Control Register
#define AT91C_CAN_MB8_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC310) // (CAN_MB8) MailBox Status Register
#define AT91C_CAN_MB8_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC304) // (CAN_MB8) MailBox Acceptance Mask Register
#define AT91C_CAN_MB8_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC30C) // (CAN_MB8) MailBox Family ID Register
#define AT91C_CAN_MB8_MID (AT91_CAST(AT91_REG *) 	0xFFFAC308) // (CAN_MB8) MailBox ID Register
#define AT91C_CAN_MB8_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC314) // (CAN_MB8) MailBox Data Low Register
// ========== Register definition for CAN_MB9 peripheral ========== 
#define AT91C_CAN_MB9_MID (AT91_CAST(AT91_REG *) 	0xFFFAC328) // (CAN_MB9) MailBox ID Register
#define AT91C_CAN_MB9_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC320) // (CAN_MB9) MailBox Mode Register
#define AT91C_CAN_MB9_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC338) // (CAN_MB9) MailBox Data High Register
#define AT91C_CAN_MB9_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC330) // (CAN_MB9) MailBox Status Register
#define AT91C_CAN_MB9_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC324) // (CAN_MB9) MailBox Acceptance Mask Register
#define AT91C_CAN_MB9_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC334) // (CAN_MB9) MailBox Data Low Register
#define AT91C_CAN_MB9_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC32C) // (CAN_MB9) MailBox Family ID Register
#define AT91C_CAN_MB9_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC33C) // (CAN_MB9) MailBox Control Register
// ========== Register definition for CAN_MB10 peripheral ========== 
#define AT91C_CAN_MB10_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC35C) // (CAN_MB10) MailBox Control Register
#define AT91C_CAN_MB10_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC358) // (CAN_MB10) MailBox Data High Register
#define AT91C_CAN_MB10_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC344) // (CAN_MB10) MailBox Acceptance Mask Register
#define AT91C_CAN_MB10_MID (AT91_CAST(AT91_REG *) 	0xFFFAC348) // (CAN_MB10) MailBox ID Register
#define AT91C_CAN_MB10_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC354) // (CAN_MB10) MailBox Data Low Register
#define AT91C_CAN_MB10_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC350) // (CAN_MB10) MailBox Status Register
#define AT91C_CAN_MB10_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC340) // (CAN_MB10) MailBox Mode Register
#define AT91C_CAN_MB10_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC34C) // (CAN_MB10) MailBox Family ID Register
// ========== Register definition for CAN_MB11 peripheral ========== 
#define AT91C_CAN_MB11_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC370) // (CAN_MB11) MailBox Status Register
#define AT91C_CAN_MB11_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC36C) // (CAN_MB11) MailBox Family ID Register
#define AT91C_CAN_MB11_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC374) // (CAN_MB11) MailBox Data Low Register
#define AT91C_CAN_MB11_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC378) // (CAN_MB11) MailBox Data High Register
#define AT91C_CAN_MB11_MID (AT91_CAST(AT91_REG *) 	0xFFFAC368) // (CAN_MB11) MailBox ID Register
#define AT91C_CAN_MB11_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC37C) // (CAN_MB11) MailBox Control Register
#define AT91C_CAN_MB11_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC360) // (CAN_MB11) MailBox Mode Register
#define AT91C_CAN_MB11_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC364) // (CAN_MB11) MailBox Acceptance Mask Register
// ========== Register definition for CAN_MB12 peripheral ========== 
#define AT91C_CAN_MB12_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC384) // (CAN_MB12) MailBox Acceptance Mask Register
#define AT91C_CAN_MB12_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC398) // (CAN_MB12) MailBox Data High Register
#define AT91C_CAN_MB12_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC380) // (CAN_MB12) MailBox Mode Register
#define AT91C_CAN_MB12_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC390) // (CAN_MB12) MailBox Status Register
#define AT91C_CAN_MB12_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC38C) // (CAN_MB12) MailBox Family ID Register
#define AT91C_CAN_MB12_MID (AT91_CAST(AT91_REG *) 	0xFFFAC388) // (CAN_MB12) MailBox ID Register
#define AT91C_CAN_MB12_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC39C) // (CAN_MB12) MailBox Control Register
#define AT91C_CAN_MB12_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC394) // (CAN_MB12) MailBox Data Low Register
// ========== Register definition for CAN_MB13 peripheral ========== 
#define AT91C_CAN_MB13_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC3B8) // (CAN_MB13) MailBox Data High Register
#define AT91C_CAN_MB13_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC3AC) // (CAN_MB13) MailBox Family ID Register
#define AT91C_CAN_MB13_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC3B0) // (CAN_MB13) MailBox Status Register
#define AT91C_CAN_MB13_MID (AT91_CAST(AT91_REG *) 	0xFFFAC3A8) // (CAN_MB13) MailBox ID Register
#define AT91C_CAN_MB13_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC3A4) // (CAN_MB13) MailBox Acceptance Mask Register
#define AT91C_CAN_MB13_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC3A0) // (CAN_MB13) MailBox Mode Register
#define AT91C_CAN_MB13_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC3BC) // (CAN_MB13) MailBox Control Register
#define AT91C_CAN_MB13_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC3B4) // (CAN_MB13) MailBox Data Low Register
// ========== Register definition for CAN_MB14 peripheral ========== 
#define AT91C_CAN_MB14_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC3D4) // (CAN_MB14) MailBox Data Low Register
#define AT91C_CAN_MB14_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC3C0) // (CAN_MB14) MailBox Mode Register
#define AT91C_CAN_MB14_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC3CC) // (CAN_MB14) MailBox Family ID Register
#define AT91C_CAN_MB14_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC3DC) // (CAN_MB14) MailBox Control Register
#define AT91C_CAN_MB14_MID (AT91_CAST(AT91_REG *) 	0xFFFAC3C8) // (CAN_MB14) MailBox ID Register
#define AT91C_CAN_MB14_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC3D8) // (CAN_MB14) MailBox Data High Register
#define AT91C_CAN_MB14_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC3D0) // (CAN_MB14) MailBox Status Register
#define AT91C_CAN_MB14_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC3C4) // (CAN_MB14) MailBox Acceptance Mask Register
// ========== Register definition for CAN_MB15 peripheral ========== 
#define AT91C_CAN_MB15_MDL (AT91_CAST(AT91_REG *) 	0xFFFAC3F4) // (CAN_MB15) MailBox Data Low Register
#define AT91C_CAN_MB15_MSR (AT91_CAST(AT91_REG *) 	0xFFFAC3F0) // (CAN_MB15) MailBox Status Register
#define AT91C_CAN_MB15_MID (AT91_CAST(AT91_REG *) 	0xFFFAC3E8) // (CAN_MB15) MailBox ID Register
#define AT91C_CAN_MB15_MAM (AT91_CAST(AT91_REG *) 	0xFFFAC3E4) // (CAN_MB15) MailBox Acceptance Mask Register
#define AT91C_CAN_MB15_MCR (AT91_CAST(AT91_REG *) 	0xFFFAC3FC) // (CAN_MB15) MailBox Control Register
#define AT91C_CAN_MB15_MFID (AT91_CAST(AT91_REG *) 	0xFFFAC3EC) // (CAN_MB15) MailBox Family ID Register
#define AT91C_CAN_MB15_MMR (AT91_CAST(AT91_REG *) 	0xFFFAC3E0) // (CAN_MB15) MailBox Mode Register
#define AT91C_CAN_MB15_MDH (AT91_CAST(AT91_REG *) 	0xFFFAC3F8) // (CAN_MB15) MailBox Data High Register
// ========== Register definition for CAN peripheral ========== 
#define AT91C_CAN_ACR   (AT91_CAST(AT91_REG *) 	0xFFFAC028) // (CAN) Abort Command Register
#define AT91C_CAN_BR    (AT91_CAST(AT91_REG *) 	0xFFFAC014) // (CAN) Baudrate Register
#define AT91C_CAN_IDR   (AT91_CAST(AT91_REG *) 	0xFFFAC008) // (CAN) Interrupt Disable Register
#define AT91C_CAN_TIMESTP (AT91_CAST(AT91_REG *) 	0xFFFAC01C) // (CAN) Time Stamp Register
#define AT91C_CAN_SR    (AT91_CAST(AT91_REG *) 	0xFFFAC010) // (CAN) Status Register
#define AT91C_CAN_IMR   (AT91_CAST(AT91_REG *) 	0xFFFAC00C) // (CAN) Interrupt Mask Register
#define AT91C_CAN_TCR   (AT91_CAST(AT91_REG *) 	0xFFFAC024) // (CAN) Transfer Command Register
#define AT91C_CAN_TIM   (AT91_CAST(AT91_REG *) 	0xFFFAC018) // (CAN) Timer Register
#define AT91C_CAN_IER   (AT91_CAST(AT91_REG *) 	0xFFFAC004) // (CAN) Interrupt Enable Register
#define AT91C_CAN_ECR   (AT91_CAST(AT91_REG *) 	0xFFFAC020) // (CAN) Error Counter Register
#define AT91C_CAN_VR    (AT91_CAST(AT91_REG *) 	0xFFFAC0FC) // (CAN) Version Register
#define AT91C_CAN_MR    (AT91_CAST(AT91_REG *) 	0xFFFAC000) // (CAN) Mode Register
// ========== Register definition for PWMC_CH0 peripheral ========== 
#define AT91C_PWMC_CH0_CCNTR (AT91_CAST(AT91_REG *) 	0xFFFB820C) // (PWMC_CH0) Channel Counter Register
#define AT91C_PWMC_CH0_CPRDR (AT91_CAST(AT91_REG *) 	0xFFFB8208) // (PWMC_CH0) Channel Period Register
#define AT91C_PWMC_CH0_CUPDR (AT91_CAST(AT91_REG *) 	0xFFFB8210) // (PWMC_CH0) Channel Update Register
#define AT91C_PWMC_CH0_CDTYR (AT91_CAST(AT91_REG *) 	0xFFFB8204) // (PWMC_CH0) Channel Duty Cycle Register
#define AT91C_PWMC_CH0_CMR (AT91_CAST(AT91_REG *) 	0xFFFB8200) // (PWMC_CH0) Channel Mode Register
#define AT91C_PWMC_CH0_Reserved (AT91_CAST(AT91_REG *) 	0xFFFB8214) // (PWMC_CH0) Reserved
// ========== Register definition for PWMC_CH1 peripheral ========== 
#define AT91C_PWMC_CH1_CCNTR (AT91_CAST(AT91_REG *) 	0xFFFB822C) // (PWMC_CH1) Channel Counter Register
#define AT91C_PWMC_CH1_CDTYR (AT91_CAST(AT91_REG *) 	0xFFFB8224) // (PWMC_CH1) Channel Duty Cycle Register
#define AT91C_PWMC_CH1_CMR (AT91_CAST(AT91_REG *) 	0xFFFB8220) // (PWMC_CH1) Channel Mode Register
#define AT91C_PWMC_CH1_CPRDR (AT91_CAST(AT91_REG *) 	0xFFFB8228) // (PWMC_CH1) Channel Period Register
#define AT91C_PWMC_CH1_Reserved (AT91_CAST(AT91_REG *) 	0xFFFB8234) // (PWMC_CH1) Reserved
#define AT91C_PWMC_CH1_CUPDR (AT91_CAST(AT91_REG *) 	0xFFFB8230) // (PWMC_CH1) Channel Update Register
// ========== Register definition for PWMC_CH2 peripheral ========== 
#define AT91C_PWMC_CH2_CUPDR (AT91_CAST(AT91_REG *) 	0xFFFB8250) // (PWMC_CH2) Channel Update Register
#define AT91C_PWMC_CH2_CMR (AT91_CAST(AT91_REG *) 	0xFFFB8240) // (PWMC_CH2) Channel Mode Register
#define AT91C_PWMC_CH2_Reserved (AT91_CAST(AT91_REG *) 	0xFFFB8254) // (PWMC_CH2) Reserved
#define AT91C_PWMC_CH2_CPRDR (AT91_CAST(AT91_REG *) 	0xFFFB8248) // (PWMC_CH2) Channel Period Register
#define AT91C_PWMC_CH2_CDTYR (AT91_CAST(AT91_REG *) 	0xFFFB8244) // (PWMC_CH2) Channel Duty Cycle Register
#define AT91C_PWMC_CH2_CCNTR (AT91_CAST(AT91_REG *) 	0xFFFB824C) // (PWMC_CH2) Channel Counter Register
// ========== Register definition for PWMC_CH3 peripheral ========== 
#define AT91C_PWMC_CH3_CPRDR (AT91_CAST(AT91_REG *) 	0xFFFB8268) // (PWMC_CH3) Channel Period Register
#define AT91C_PWMC_CH3_Reserved (AT91_CAST(AT91_REG *) 	0xFFFB8274) // (PWMC_CH3) Reserved
#define AT91C_PWMC_CH3_CUPDR (AT91_CAST(AT91_REG *) 	0xFFFB8270) // (PWMC_CH3) Channel Update Register
#define AT91C_PWMC_CH3_CDTYR (AT91_CAST(AT91_REG *) 	0xFFFB8264) // (PWMC_CH3) Channel Duty Cycle Register
#define AT91C_PWMC_CH3_CCNTR (AT91_CAST(AT91_REG *) 	0xFFFB826C) // (PWMC_CH3) Channel Counter Register
#define AT91C_PWMC_CH3_CMR (AT91_CAST(AT91_REG *) 	0xFFFB8260) // (PWMC_CH3) Channel Mode Register
// ========== Register definition for PWMC peripheral ========== 
#define AT91C_PWMC_IDR  (AT91_CAST(AT91_REG *) 	0xFFFB8014) // (PWMC) PWMC Interrupt Disable Register
#define AT91C_PWMC_MR   (AT91_CAST(AT91_REG *) 	0xFFFB8000) // (PWMC) PWMC Mode Register
#define AT91C_PWMC_VR   (AT91_CAST(AT91_REG *) 	0xFFFB80FC) // (PWMC) PWMC Version Register
#define AT91C_PWMC_IMR  (AT91_CAST(AT91_REG *) 	0xFFFB8018) // (PWMC) PWMC Interrupt Mask Register
#define AT91C_PWMC_SR   (AT91_CAST(AT91_REG *) 	0xFFFB800C) // (PWMC) PWMC Status Register
#define AT91C_PWMC_ISR  (AT91_CAST(AT91_REG *) 	0xFFFB801C) // (PWMC) PWMC Interrupt Status Register
#define AT91C_PWMC_ENA  (AT91_CAST(AT91_REG *) 	0xFFFB8004) // (PWMC) PWMC Enable Register
#define AT91C_PWMC_IER  (AT91_CAST(AT91_REG *) 	0xFFFB8010) // (PWMC) PWMC Interrupt Enable Register
#define AT91C_PWMC_DIS  (AT91_CAST(AT91_REG *) 	0xFFFB8008) // (PWMC) PWMC Disable Register
// ========== Register definition for MACB peripheral ========== 
#define AT91C_MACB_ALE  (AT91_CAST(AT91_REG *) 	0xFFFBC054) // (MACB) Alignment Error Register
#define AT91C_MACB_RRE  (AT91_CAST(AT91_REG *) 	0xFFFBC06C) // (MACB) Receive Ressource Error Register
#define AT91C_MACB_SA4H (AT91_CAST(AT91_REG *) 	0xFFFBC0B4) // (MACB) Specific Address 4 Top, Last 2 bytes
#define AT91C_MACB_TPQ  (AT91_CAST(AT91_REG *) 	0xFFFBC0BC) // (MACB) Transmit Pause Quantum Register
#define AT91C_MACB_RJA  (AT91_CAST(AT91_REG *) 	0xFFFBC07C) // (MACB) Receive Jabbers Register
#define AT91C_MACB_SA2H (AT91_CAST(AT91_REG *) 	0xFFFBC0A4) // (MACB) Specific Address 2 Top, Last 2 bytes
#define AT91C_MACB_TPF  (AT91_CAST(AT91_REG *) 	0xFFFBC08C) // (MACB) Transmitted Pause Frames Register
#define AT91C_MACB_ROV  (AT91_CAST(AT91_REG *) 	0xFFFBC070) // (MACB) Receive Overrun Errors Register
#define AT91C_MACB_SA4L (AT91_CAST(AT91_REG *) 	0xFFFBC0B0) // (MACB) Specific Address 4 Bottom, First 4 bytes
#define AT91C_MACB_MAN  (AT91_CAST(AT91_REG *) 	0xFFFBC034) // (MACB) PHY Maintenance Register
#define AT91C_MACB_TID  (AT91_CAST(AT91_REG *) 	0xFFFBC0B8) // (MACB) Type ID Checking Register
#define AT91C_MACB_TBQP (AT91_CAST(AT91_REG *) 	0xFFFBC01C) // (MACB) Transmit Buffer Queue Pointer
#define AT91C_MACB_SA3L (AT91_CAST(AT91_REG *) 	0xFFFBC0A8) // (MACB) Specific Address 3 Bottom, First 4 bytes
#define AT91C_MACB_DTF  (AT91_CAST(AT91_REG *) 	0xFFFBC058) // (MACB) Deferred Transmission Frame Register
#define AT91C_MACB_PTR  (AT91_CAST(AT91_REG *) 	0xFFFBC038) // (MACB) Pause Time Register
#define AT91C_MACB_CSE  (AT91_CAST(AT91_REG *) 	0xFFFBC068) // (MACB) Carrier Sense Error Register
#define AT91C_MACB_ECOL (AT91_CAST(AT91_REG *) 	0xFFFBC060) // (MACB) Excessive Collision Register
#define AT91C_MACB_STE  (AT91_CAST(AT91_REG *) 	0xFFFBC084) // (MACB) SQE Test Error Register
#define AT91C_MACB_MCF  (AT91_CAST(AT91_REG *) 	0xFFFBC048) // (MACB) Multiple Collision Frame Register
#define AT91C_MACB_IER  (AT91_CAST(AT91_REG *) 	0xFFFBC028) // (MACB) Interrupt Enable Register
#define AT91C_MACB_ELE  (AT91_CAST(AT91_REG *) 	0xFFFBC078) // (MACB) Excessive Length Errors Register
#define AT91C_MACB_USRIO (AT91_CAST(AT91_REG *) 	0xFFFBC0C0) // (MACB) USER Input/Output Register
#define AT91C_MACB_PFR  (AT91_CAST(AT91_REG *) 	0xFFFBC03C) // (MACB) Pause Frames received Register
#define AT91C_MACB_FCSE (AT91_CAST(AT91_REG *) 	0xFFFBC050) // (MACB) Frame Check Sequence Error Register
#define AT91C_MACB_SA1L (AT91_CAST(AT91_REG *) 	0xFFFBC098) // (MACB) Specific Address 1 Bottom, First 4 bytes
#define AT91C_MACB_NCR  (AT91_CAST(AT91_REG *) 	0xFFFBC000) // (MACB) Network Control Register
#define AT91C_MACB_HRT  (AT91_CAST(AT91_REG *) 	0xFFFBC094) // (MACB) Hash Address Top[63:32]
#define AT91C_MACB_NCFGR (AT91_CAST(AT91_REG *) 	0xFFFBC004) // (MACB) Network Configuration Register
#define AT91C_MACB_SCF  (AT91_CAST(AT91_REG *) 	0xFFFBC044) // (MACB) Single Collision Frame Register
#define AT91C_MACB_LCOL (AT91_CAST(AT91_REG *) 	0xFFFBC05C) // (MACB) Late Collision Register
#define AT91C_MACB_SA3H (AT91_CAST(AT91_REG *) 	0xFFFBC0AC) // (MACB) Specific Address 3 Top, Last 2 bytes
#define AT91C_MACB_HRB  (AT91_CAST(AT91_REG *) 	0xFFFBC090) // (MACB) Hash Address Bottom[31:0]
#define AT91C_MACB_ISR  (AT91_CAST(AT91_REG *) 	0xFFFBC024) // (MACB) Interrupt Status Register
#define AT91C_MACB_IMR  (AT91_CAST(AT91_REG *) 	0xFFFBC030) // (MACB) Interrupt Mask Register
#define AT91C_MACB_WOL  (AT91_CAST(AT91_REG *) 	0xFFFBC0C4) // (MACB) Wake On LAN Register
#define AT91C_MACB_USF  (AT91_CAST(AT91_REG *) 	0xFFFBC080) // (MACB) Undersize Frames Register
#define AT91C_MACB_TSR  (AT91_CAST(AT91_REG *) 	0xFFFBC014) // (MACB) Transmit Status Register
#define AT91C_MACB_FRO  (AT91_CAST(AT91_REG *) 	0xFFFBC04C) // (MACB) Frames Received OK Register
#define AT91C_MACB_IDR  (AT91_CAST(AT91_REG *) 	0xFFFBC02C) // (MACB) Interrupt Disable Register
#define AT91C_MACB_SA1H (AT91_CAST(AT91_REG *) 	0xFFFBC09C) // (MACB) Specific Address 1 Top, Last 2 bytes
#define AT91C_MACB_RLE  (AT91_CAST(AT91_REG *) 	0xFFFBC088) // (MACB) Receive Length Field Mismatch Register
#define AT91C_MACB_TUND (AT91_CAST(AT91_REG *) 	0xFFFBC064) // (MACB) Transmit Underrun Error Register
#define AT91C_MACB_RSR  (AT91_CAST(AT91_REG *) 	0xFFFBC020) // (MACB) Receive Status Register
#define AT91C_MACB_SA2L (AT91_CAST(AT91_REG *) 	0xFFFBC0A0) // (MACB) Specific Address 2 Bottom, First 4 bytes
#define AT91C_MACB_FTO  (AT91_CAST(AT91_REG *) 	0xFFFBC040) // (MACB) Frames Transmitted OK Register
#define AT91C_MACB_RSE  (AT91_CAST(AT91_REG *) 	0xFFFBC074) // (MACB) Receive Symbol Errors Register
#define AT91C_MACB_NSR  (AT91_CAST(AT91_REG *) 	0xFFFBC008) // (MACB) Network Status Register
#define AT91C_MACB_RBQP (AT91_CAST(AT91_REG *) 	0xFFFBC018) // (MACB) Receive Buffer Queue Pointer
#define AT91C_MACB_REV  (AT91_CAST(AT91_REG *) 	0xFFFBC0FC) // (MACB) Revision Register
// ========== Register definition for LCDC peripheral ========== 
#define AT91C_LCDC_BA2  (AT91_CAST(AT91_REG *) 	0x00700004) // (LCDC) DMA Base Address Register 2
#define AT91C_LCDC_DP3_4 (AT91_CAST(AT91_REG *) 	0x00700830) // (LCDC) Dithering Pattern DP3_4 Register
#define AT91C_LCDC_FRMA2 (AT91_CAST(AT91_REG *) 	0x00700014) // (LCDC) DMA Frame Address Register 2
#define AT91C_LCDC_TIM1 (AT91_CAST(AT91_REG *) 	0x00700808) // (LCDC) LCD Timing Config 1 Register
#define AT91C_LCDC_FIFO (AT91_CAST(AT91_REG *) 	0x00700814) // (LCDC) LCD FIFO Register
#define AT91C_LCDC_TIM2 (AT91_CAST(AT91_REG *) 	0x0070080C) // (LCDC) LCD Timing Config 2 Register
#define AT91C_LCDC_DP5_7 (AT91_CAST(AT91_REG *) 	0x0070082C) // (LCDC) Dithering Pattern DP5_7 Register
#define AT91C_LCDC_IER  (AT91_CAST(AT91_REG *) 	0x00700848) // (LCDC) Interrupt Enable Register
#define AT91C_LCDC_FRMCFG (AT91_CAST(AT91_REG *) 	0x00700018) // (LCDC) DMA Frame Configuration Register
#define AT91C_LCDC_FRMA1 (AT91_CAST(AT91_REG *) 	0x00700010) // (LCDC) DMA Frame Address Register 1
#define AT91C_LCDC_DP3_5 (AT91_CAST(AT91_REG *) 	0x00700824) // (LCDC) Dithering Pattern DP3_5 Register
#define AT91C_LCDC_PWRCON (AT91_CAST(AT91_REG *) 	0x0070083C) // (LCDC) Power Control Register
#define AT91C_LCDC_IMR  (AT91_CAST(AT91_REG *) 	0x00700850) // (LCDC) Interrupt Mask Register
#define AT91C_LCDC_LUT_ENTRY (AT91_CAST(AT91_REG *) 	0x00700C00) // (LCDC) LUT Entries Register
#define AT91C_LCDC_IRR  (AT91_CAST(AT91_REG *) 	0x00700864) // (LCDC) Interrupts Raw Status Register
#define AT91C_LCDC_FRMP2 (AT91_CAST(AT91_REG *) 	0x0070000C) // (LCDC) DMA Frame Pointer Register 2
#define AT91C_LCDC_ICR  (AT91_CAST(AT91_REG *) 	0x00700858) // (LCDC) Interrupt Clear Register
#define AT91C_LCDC_DP1_2 (AT91_CAST(AT91_REG *) 	0x0070081C) // (LCDC) Dithering Pattern DP1_2 Register
#define AT91C_LCDC_DMACON (AT91_CAST(AT91_REG *) 	0x0070001C) // (LCDC) DMA Control Register
#define AT91C_LCDC_LCDFRCFG (AT91_CAST(AT91_REG *) 	0x00700810) // (LCDC) LCD Frame Config Register
#define AT91C_LCDC_DP2_3 (AT91_CAST(AT91_REG *) 	0x00700828) // (LCDC) Dithering Pattern DP2_3 Register
#define AT91C_LCDC_DP6_7 (AT91_CAST(AT91_REG *) 	0x00700838) // (LCDC) Dithering Pattern DP6_7 Register
#define AT91C_LCDC_LCDCON1 (AT91_CAST(AT91_REG *) 	0x00700800) // (LCDC) LCD Control 1 Register
#define AT91C_LCDC_DMA2DCFG (AT91_CAST(AT91_REG *) 	0x00700020) // (LCDC) DMA 2D addressing configuration
#define AT91C_LCDC_GPR  (AT91_CAST(AT91_REG *) 	0x0070085C) // (LCDC) General Purpose Register
#define AT91C_LCDC_BA1  (AT91_CAST(AT91_REG *) 	0x00700000) // (LCDC) DMA Base Address Register 1
#define AT91C_LCDC_CTRSTCON (AT91_CAST(AT91_REG *) 	0x00700840) // (LCDC) Contrast Control Register
#define AT91C_LCDC_CTRSTVAL (AT91_CAST(AT91_REG *) 	0x00700844) // (LCDC) Contrast Value Register
#define AT91C_LCDC_LCDCON2 (AT91_CAST(AT91_REG *) 	0x00700804) // (LCDC) LCD Control 2 Register
#define AT91C_LCDC_IDR  (AT91_CAST(AT91_REG *) 	0x0070084C) // (LCDC) Interrupt Disable Register
#define AT91C_LCDC_ISR  (AT91_CAST(AT91_REG *) 	0x00700854) // (LCDC) Interrupt Enable Register
#define AT91C_LCDC_ITR  (AT91_CAST(AT91_REG *) 	0x00700860) // (LCDC) Interrupts Test Register
#define AT91C_LCDC_DP4_7 (AT91_CAST(AT91_REG *) 	0x00700820) // (LCDC) Dithering Pattern DP4_7 Register
#define AT91C_LCDC_MVAL (AT91_CAST(AT91_REG *) 	0x00700818) // (LCDC) LCD Mode Toggle Rate Value Register
#define AT91C_LCDC_DP4_5 (AT91_CAST(AT91_REG *) 	0x00700834) // (LCDC) Dithering Pattern DP4_5 Register
#define AT91C_LCDC_FRMP1 (AT91_CAST(AT91_REG *) 	0x00700008) // (LCDC) DMA Frame Pointer Register 1
// ========== Register definition for DMA peripheral ========== 
#define AT91C_DMA_RAWSRCTRAN (AT91_CAST(AT91_REG *) 	0x008002D0) // (DMA) Raw Status for IntSrcTran Interrupt
#define AT91C_DMA_SGR0  (AT91_CAST(AT91_REG *) 	0x00800048) // (DMA) Source Gather Register for channel 0
#define AT91C_DMA_REQSRCREG (AT91_CAST(AT91_REG *) 	0x00800368) // (DMA) Source Software Transaction Request Register
#define AT91C_DMA_STATUSERR (AT91_CAST(AT91_REG *) 	0x00800308) // (DMA) Status for IntErr IInterrupt
#define AT91C_DMA_SAR1  (AT91_CAST(AT91_REG *) 	0x00800058) // (DMA) Source Address Register for channel 1
#define AT91C_DMA_CLEARDSTTRAN (AT91_CAST(AT91_REG *) 	0x00800350) // (DMA) Clear for IntDstTran IInterrupt
#define AT91C_DMA_STATUSSRCTRAN (AT91_CAST(AT91_REG *) 	0x008002F8) // (DMA) Status for IntSrcTran Interrupt
#define AT91C_DMA_REQDSTREG (AT91_CAST(AT91_REG *) 	0x00800370) // (DMA) Destination Software Transaction Request Register
#define AT91C_DMA_DSTATAR0 (AT91_CAST(AT91_REG *) 	0x00800038) // (DMA) Destination Status Adress Register for channel 0
#define AT91C_DMA_LSTREQDSTREG (AT91_CAST(AT91_REG *) 	0x00800390) // (DMA) Last Destination Software Transaction Request Register
#define AT91C_DMA_SGLREQDSTREG (AT91_CAST(AT91_REG *) 	0x00800380) // (DMA) Single Destination Software Transaction Request Register
#define AT91C_DMA_CTL1h (AT91_CAST(AT91_REG *) 	0x00800074) // (DMA) Control Register for channel 1 - high
#define AT91C_DMA_CLEARERR (AT91_CAST(AT91_REG *) 	0x00800358) // (DMA) Clear for IntErr Interrupt
#define AT91C_DMA_DSR0  (AT91_CAST(AT91_REG *) 	0x00800050) // (DMA) Destination Scatter Register for channel 0
#define AT91C_DMA_DMATESTREG (AT91_CAST(AT91_REG *) 	0x008003B0) // (DMA) DW_ahb_dmac Test Register
#define AT91C_DMA_DSR1  (AT91_CAST(AT91_REG *) 	0x008000A8) // (DMA) Destination Scatter Register for channel 1
#define AT91C_DMA_CTL0l (AT91_CAST(AT91_REG *) 	0x00800018) // (DMA) Control Register for channel 0 - low
#define AT91C_DMA_STATUSBLOCK (AT91_CAST(AT91_REG *) 	0x008002F0) // (DMA) Status for IntBlock Interrupt
#define AT91C_DMA_SAR0  (AT91_CAST(AT91_REG *) 	0x00800000) // (DMA) Source Address Register for channel 0
#define AT91C_DMA_LLP0  (AT91_CAST(AT91_REG *) 	0x00800010) // (DMA) Linked List Pointer Register for channel 0
#define AT91C_DMA_CTL1l (AT91_CAST(AT91_REG *) 	0x00800070) // (DMA) Control Register for channel 1 - low
#define AT91C_DMA_SGR1  (AT91_CAST(AT91_REG *) 	0x008000A0) // (DMA) Source Gather Register for channel 1
#define AT91C_DMA_CFG0l (AT91_CAST(AT91_REG *) 	0x00800040) // (DMA) Configuration Register for channel 0 - low
#define AT91C_DMA_CFG0h (AT91_CAST(AT91_REG *) 	0x00800044) // (DMA) Configuration Register for channel 0 - high
#define AT91C_DMA_STATUSTFR (AT91_CAST(AT91_REG *) 	0x008002E8) // (DMA) Status for IntTfr Interrupt
#define AT91C_DMA_MASKBLOCK (AT91_CAST(AT91_REG *) 	0x00800318) // (DMA) Mask for IntBlock Interrupt
#define AT91C_DMA_RAWBLOCK (AT91_CAST(AT91_REG *) 	0x008002C8) // (DMA) Raw Status for IntBlock Interrupt
#define AT91C_DMA_CHENREG (AT91_CAST(AT91_REG *) 	0x008003A0) // (DMA) DW_ahb_dmac Channel Enable Register
#define AT91C_DMA_DSTAT0 (AT91_CAST(AT91_REG *) 	0x00800028) // (DMA) Destination Status Register for channel 0
#define AT91C_DMA_CLEARSRCTRAN (AT91_CAST(AT91_REG *) 	0x00800348) // (DMA) Clear for IntSrcTran Interrupt
#define AT91C_DMA_DAR1  (AT91_CAST(AT91_REG *) 	0x00800060) // (DMA) Destination Address Register for channel 1
#define AT91C_DMA_CLEARBLOCK (AT91_CAST(AT91_REG *) 	0x00800340) // (DMA) Clear for IntBlock Interrupt
#define AT91C_DMA_CFG1h (AT91_CAST(AT91_REG *) 	0x0080009C) // (DMA) Configuration Register for channel 1 - high
#define AT91C_DMA_DSTATAR1 (AT91_CAST(AT91_REG *) 	0x00800090) // (DMA) Destination Status Adress Register for channel 1
#define AT91C_DMA_RAWERR (AT91_CAST(AT91_REG *) 	0x008002E0) // (DMA) Raw Status for IntErr Interrupt
#define AT91C_DMA_CTL0h (AT91_CAST(AT91_REG *) 	0x0080001C) // (DMA) Control Register for channel 0 - high
#define AT91C_DMA_SGLREQSRCREG (AT91_CAST(AT91_REG *) 	0x00800378) // (DMA) Single Source Software Transaction Request Register
#define AT91C_DMA_LLP1  (AT91_CAST(AT91_REG *) 	0x00800068) // (DMA) Linked List Pointer Register for channel 1
#define AT91C_DMA_MASKDSTTRAN (AT91_CAST(AT91_REG *) 	0x00800328) // (DMA) Mask for IntDstTran Interrupt
#define AT91C_DMA_MASKSRCTRAN (AT91_CAST(AT91_REG *) 	0x00800320) // (DMA) Mask for IntSrcTran Interrupt
#define AT91C_DMA_LSTREQSRCREG (AT91_CAST(AT91_REG *) 	0x00800388) // (DMA) Last Source Software Transaction Request Register
#define AT91C_DMA_CLEARTFR (AT91_CAST(AT91_REG *) 	0x00800338) // (DMA) Clear for IntTfr Interrupt
#define AT91C_DMA_SSTATAR1 (AT91_CAST(AT91_REG *) 	0x00800088) // (DMA) Source Status Adress Register for channel 1
#define AT91C_DMA_DAR0  (AT91_CAST(AT91_REG *) 	0x00800008) // (DMA) Destination Address Register for channel 0
#define AT91C_DMA_SSTAT0 (AT91_CAST(AT91_REG *) 	0x00800020) // (DMA) Source Status Register for channel 0
#define AT91C_DMA_DMAIDREG (AT91_CAST(AT91_REG *) 	0x008003A8) // (DMA) DW_ahb_dmac ID Register
#define AT91C_DMA_DSTAT1 (AT91_CAST(AT91_REG *) 	0x00800080) // (DMA) Destination Status Register for channel 1
#define AT91C_DMA_RAWTFR (AT91_CAST(AT91_REG *) 	0x008002C0) // (DMA) Raw Status for IntTfr Interrupt
#define AT91C_DMA_VERSIONID (AT91_CAST(AT91_REG *) 	0x008003B8) // (DMA) DW_ahb_dmac Version ID Register
#define AT91C_DMA_STATUSDSTTRAN (AT91_CAST(AT91_REG *) 	0x00800300) // (DMA) Status for IntDstTran IInterrupt
#define AT91C_DMA_MASKERR (AT91_CAST(AT91_REG *) 	0x00800330) // (DMA) Mask for IntErr Interrupt
#define AT91C_DMA_SSTATAR0 (AT91_CAST(AT91_REG *) 	0x00800030) // (DMA) Source Status Adress Register for channel 0
#define AT91C_DMA_MASKTFR (AT91_CAST(AT91_REG *) 	0x00800310) // (DMA) Mask for IntTfr Interrupt
#define AT91C_DMA_SSTAT1 (AT91_CAST(AT91_REG *) 	0x00800078) // (DMA) Source Status Register for channel 1
#define AT91C_DMA_STATUSINT (AT91_CAST(AT91_REG *) 	0x00800360) // (DMA) Status for each Interrupt Type
#define AT91C_DMA_DMACFGREG (AT91_CAST(AT91_REG *) 	0x00800398) // (DMA) DW_ahb_dmac Configuration Register
#define AT91C_DMA_RAWDSTTRAN (AT91_CAST(AT91_REG *) 	0x008002D8) // (DMA) Raw Status for IntDstTran Interrupt
#define AT91C_DMA_CFG1l (AT91_CAST(AT91_REG *) 	0x00800098) // (DMA) Configuration Register for channel 1 - low
// ========== Register definition for OTG peripheral ========== 
#define AT91C_OTG_DevRxStatus (AT91_CAST(AT91_REG *) 	0x0090461C) // (OTG) OUT EP RX FIFO Status Reg (Device mode)
#define AT91C_OTG_HostRootHubPort0 (AT91_CAST(AT91_REG *) 	0x00905054) // (OTG) Port Status Change Control Reg (Host mode)
#define AT91C_OTG_DevEpNe1 (AT91_CAST(AT91_REG *) 	0x00904808) // (OTG) EP1 NE Reg (Device mode)
#define AT91C_OTG_InTxFifo (AT91_CAST(AT91_REG *) 	0x00900000) // (OTG) OTG IN TX FIFO. In Host mode, acts as a RX FIFO, in Device mode acts as a TX FIFO
#define AT91C_OTG_DevTxFifoSize0 (AT91_CAST(AT91_REG *) 	0x00904408) // (OTG) IN EP0 TX FIFO Size Reg (Device mode)
#define AT91C_OTG_HostToken (AT91_CAST(AT91_REG *) 	0x00905090) // (OTG) Token Reg (Host mode)
#define AT91C_OTG_DevTxStatus2 (AT91_CAST(AT91_REG *) 	0x00904424) // (OTG) IN EP2 TX Status Reg (Device mode)
#define AT91C_OTG_DevTxFifoSize1 (AT91_CAST(AT91_REG *) 	0x00904418) // (OTG) IN EP1 TX FIFO Size Reg (Device mode)
#define AT91C_OTG_DevRxControl1 (AT91_CAST(AT91_REG *) 	0x00904510) // (OTG) OUT EP1 RX Control Reg (Device mode)
#define AT91C_OTG_DevTxControl5 (AT91_CAST(AT91_REG *) 	0x00904450) // (OTG) IN EP5 TX Control Reg (Device mode)
#define AT91C_OTG_DevTxControl2 (AT91_CAST(AT91_REG *) 	0x00904420) // (OTG) IN EP2 TX Control Reg (Device mode)
#define AT91C_OTG_HostFifoControl (AT91_CAST(AT91_REG *) 	0x00904C0C) // (OTG) Host Control Reg (Host mode)
#define AT91C_OTG_DevTxFifo4 (AT91_CAST(AT91_REG *) 	0x00901000) // (OTG) OTG IN TX FIFO for EP4 in Device mode
#define AT91C_OTG_HostThreshold (AT91_CAST(AT91_REG *) 	0x00904C14) // (OTG) Threshold Reg (Host mode)
#define AT91C_OTG_DevSetupStatus (AT91_CAST(AT91_REG *) 	0x00904620) // (OTG) Setup RX FIFO Status Reg (Device mode)
#define AT91C_OTG_DevTxFifoSize3 (AT91_CAST(AT91_REG *) 	0x00904438) // (OTG) IN EP3 TX FIFO Size Reg (Device mode)
#define AT91C_OTG_HostIntrMask (AT91_CAST(AT91_REG *) 	0x00904C04) // (OTG) Interrupt Enable Reg (Host mode)
#define AT91C_OTG_DevIntrMask (AT91_CAST(AT91_REG *) 	0x0090460C) // (OTG) Device Interrupt enable Register (Device mode)
#define AT91C_OTG_DevIntr (AT91_CAST(AT91_REG *) 	0x00904608) // (OTG) Device Interrupt Register (Device mode)
#define AT91C_OTG_HostFrameRem (AT91_CAST(AT91_REG *) 	0x00905038) // (OTG) Frame Remaining Reg (Host mode)
#define AT91C_OTG_HostFifoSize (AT91_CAST(AT91_REG *) 	0x00904C10) // (OTG) FIFO Size Reg (Host mode)
#define AT91C_OTG_DevThreshold (AT91_CAST(AT91_REG *) 	0x00904618) // (OTG) Threshold Reg (Device mode)
#define AT91C_OTG_DevRxControl2 (AT91_CAST(AT91_REG *) 	0x00904520) // (OTG) OUT EP2 RX Control Reg (Device mode)
#define AT91C_OTG_OutRxFifo (AT91_CAST(AT91_REG *) 	0x00904000) // (OTG) OTG OUT RX FIFO. In Host mode, acts as a TX FIFO, in Device mode, acts as a RX FIFO
#define AT91C_OTG_DevTxFifoSize2 (AT91_CAST(AT91_REG *) 	0x00904428) // (OTG) IN EP2 TX FIFO Size Reg (Device mode)
#define AT91C_OTG_DevTxStatus0 (AT91_CAST(AT91_REG *) 	0x00904404) // (OTG) IN EP0 TX Status Reg (Device mode)
#define AT91C_OTG_DevEpNe5 (AT91_CAST(AT91_REG *) 	0x00904818) // (OTG) EP5 NE Reg (Device mode)
#define AT91C_OTG_DevSetupDataHigh (AT91_CAST(AT91_REG *) 	0x00904704) // (OTG) Setup Data 1st DWORD (Device mode)
#define AT91C_OTG_HostIntr (AT91_CAST(AT91_REG *) 	0x00904C00) // (OTG) Interrupt Reg (Host mode)
#define AT91C_OTG_DevTxCount0 (AT91_CAST(AT91_REG *) 	0x0090440C) // (OTG) IN EP0 TX Transfert Size Reg (Device mode)
#define AT91C_OTG_DevConfig (AT91_CAST(AT91_REG *) 	0x00904600) // (OTG) Configure the device (Device mode)
#define AT91C_OTG_DevTxCount2 (AT91_CAST(AT91_REG *) 	0x0090442C) // (OTG) IN EP2 TX Transfert Size Reg (Device mode)
#define AT91C_OTG_DevTxStatus3 (AT91_CAST(AT91_REG *) 	0x00904434) // (OTG) IN EP3 TX Status Reg (Device mode)
#define AT91C_OTG_DevEpNe2 (AT91_CAST(AT91_REG *) 	0x0090480C) // (OTG) EP2 NE Reg (Device mode)
#define AT91C_OTG_TWI   (AT91_CAST(AT91_REG *) 	0x0090470C) // (OTG) *TWI Reg (Device and Host mode)
#define AT91C_OTG_DevRxControl0 (AT91_CAST(AT91_REG *) 	0x00904500) // (OTG) OUT EP0 RX Control Reg (Device mode)
#define AT91C_OTG_DevTxFifo2 (AT91_CAST(AT91_REG *) 	0x00900800) // (OTG) OTG IN TX FIFO for EP2 in Device mode
#define AT91C_OTG_DevTxCount1 (AT91_CAST(AT91_REG *) 	0x0090441C) // (OTG) IN EP1 TX Transfert Size Reg (Device mode)
#define AT91C_OTG_DevTxStatus5 (AT91_CAST(AT91_REG *) 	0x00904454) // (OTG) IN EP5 TX Status Reg (Device mode)
#define AT91C_OTG_DevTxStatus1 (AT91_CAST(AT91_REG *) 	0x00904414) // (OTG) IN EP1 TX Status Reg (Device mode)
#define AT91C_OTG_DevRxControl4 (AT91_CAST(AT91_REG *) 	0x00904540) // (OTG) OUT EP4 RX Control Reg (Device mode)
#define AT91C_OTG_DevEpNe3 (AT91_CAST(AT91_REG *) 	0x00904810) // (OTG) EP3 NE Reg (Device mode)
#define AT91C_OTG_DevStatus (AT91_CAST(AT91_REG *) 	0x00904604) // (OTG) Reflects status information needed to service some interrupts (Device mode)
#define AT91C_OTG_DevRxControl5 (AT91_CAST(AT91_REG *) 	0x00904550) // (OTG) OUT EP5 RX Control Reg (Device mode)
#define AT91C_OTG_DevTxFifo1 (AT91_CAST(AT91_REG *) 	0x00900400) // (OTG) OTG IN TX FIFO for EP1 in Device mode
#define AT91C_OTG_DevTxFifoSize4 (AT91_CAST(AT91_REG *) 	0x00904448) // (OTG) IN EP4 TX FIFO Size Reg (Device mode)
#define AT91C_OTG_DevTxControl0 (AT91_CAST(AT91_REG *) 	0x00904400) // (OTG) IN EP0 TX Control Reg (Device mode)
#define AT91C_OTG_DevTxControl4 (AT91_CAST(AT91_REG *) 	0x00904440) // (OTG) IN EP4 TX Control Reg (Device mode)
#define AT91C_OTG_HostFrameNum (AT91_CAST(AT91_REG *) 	0x0090503C) // (OTG) Frame Number Reg (Host mode)
#define AT91C_OTG_DevSetupDataLow (AT91_CAST(AT91_REG *) 	0x00904700) // (OTG) Setup Data 1st DWORD (Device mode)
#define AT91C_OTG_DevRxFifoSize (AT91_CAST(AT91_REG *) 	0x00904610) // (OTG) OUT EP RX FIFO Size Reg (Device mode)
#define AT91C_OTG_DevTxCount4 (AT91_CAST(AT91_REG *) 	0x0090444C) // (OTG) IN EP4 TX Transfert Size Reg (Device mode)
#define AT91C_OTG_DevFrameNum (AT91_CAST(AT91_REG *) 	0x00904628) // (OTG) Frame Number Reg (Device mode)
#define AT91C_OTG_DevEpNe0 (AT91_CAST(AT91_REG *) 	0x00904804) // (OTG) EP0 NE Reg (Device mode)
#define AT91C_OTG_DevTxFifoSize5 (AT91_CAST(AT91_REG *) 	0x00904458) // (OTG) IN EP5 TX FIFO Size Reg (Device mode)
#define AT91C_OTG_DevRxControl3 (AT91_CAST(AT91_REG *) 	0x00904530) // (OTG) OUT EP3 RX Control Reg (Device mode)
#define AT91C_OTG_Biu   (AT91_CAST(AT91_REG *) 	0x00904708) // (OTG) Slave BIU Delay Count Reg (Device and Host modes)
#define AT91C_OTG_DevTxCount3 (AT91_CAST(AT91_REG *) 	0x0090443C) // (OTG) IN EP3 TX Transfert Size Reg (Device mode)
#define AT91C_OTG_HostTxCount (AT91_CAST(AT91_REG *) 	0x00904C18) // (OTG) OUT Transfert Size Reg (Host mode)
#define AT91C_OTG_DevTxCount5 (AT91_CAST(AT91_REG *) 	0x0090445C) // (OTG) IN EP5 TX Transfert Size Reg (Device mode)
#define AT91C_OTG_DevTxControl3 (AT91_CAST(AT91_REG *) 	0x00904430) // (OTG) IN EP3 TX Control Reg (Device mode)
#define AT91C_OTG_DevTxControl1 (AT91_CAST(AT91_REG *) 	0x00904410) // (OTG) IN EP1 TX Control Reg (Device mode)
#define AT91C_OTG_DevEnpIntr (AT91_CAST(AT91_REG *) 	0x00904624) // (OTG) Global EP Interrupt Reg (Device mode)
#define AT91C_OTG_CtrlStatus (AT91_CAST(AT91_REG *) 	0x00905094) // (OTG) Control and Status Reg (Device and Host mode)
#define AT91C_OTG_DevEpNe4 (AT91_CAST(AT91_REG *) 	0x00904814) // (OTG) EP4 NE Reg (Device mode)
#define AT91C_OTG_HostFrameIntvl (AT91_CAST(AT91_REG *) 	0x00905034) // (OTG) Frame Interval Reg (Host mode)
#define AT91C_OTG_DevTxFifo3 (AT91_CAST(AT91_REG *) 	0x00900C00) // (OTG) OTG IN TX FIFO for EP3 in Device mode
#define AT91C_OTG_HostStatus (AT91_CAST(AT91_REG *) 	0x00904C08) // (OTG) Status Reg (Host mode)
#define AT91C_OTG_DevTxStatus4 (AT91_CAST(AT91_REG *) 	0x00904444) // (OTG) IN EP4 TX Status Reg (Device mode)
#define AT91C_OTG_DevTxFifo5 (AT91_CAST(AT91_REG *) 	0x00901400) // (OTG) OTG IN TX FIFO for EP5 in Device mode
#define AT91C_OTG_DevEnpIntrMask (AT91_CAST(AT91_REG *) 	0x00904614) // (OTG) Global EP Interrupt Enable Reg (Device mode)
// ========== Register definition for UDPHS_EPTFIFO peripheral ========== 
#define AT91C_UDPHS_EPTFIFO_READEPT0 (AT91_CAST(AT91_REG *) 	0x00B00000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 0
#define AT91C_UDPHS_EPTFIFO_READEPTA (AT91_CAST(AT91_REG *) 	0x00BA0000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 10
#define AT91C_UDPHS_EPTFIFO_READEPT3 (AT91_CAST(AT91_REG *) 	0x00B30000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 3
#define AT91C_UDPHS_EPTFIFO_READEPT2 (AT91_CAST(AT91_REG *) 	0x00B20000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 2
#define AT91C_UDPHS_EPTFIFO_READEPTB (AT91_CAST(AT91_REG *) 	0x00BB0000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 11
#define AT91C_UDPHS_EPTFIFO_READEPT5 (AT91_CAST(AT91_REG *) 	0x00B50000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 5
#define AT91C_UDPHS_EPTFIFO_READEPT6 (AT91_CAST(AT91_REG *) 	0x00B60000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 6
#define AT91C_UDPHS_EPTFIFO_READEPTD (AT91_CAST(AT91_REG *) 	0x00BD0000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 13
#define AT91C_UDPHS_EPTFIFO_READEPT8 (AT91_CAST(AT91_REG *) 	0x00B80000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 8
#define AT91C_UDPHS_EPTFIFO_READEPTC (AT91_CAST(AT91_REG *) 	0x00BC0000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 12
#define AT91C_UDPHS_EPTFIFO_READEPT4 (AT91_CAST(AT91_REG *) 	0x00B40000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 4
#define AT91C_UDPHS_EPTFIFO_READEPT7 (AT91_CAST(AT91_REG *) 	0x00B70000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 7
#define AT91C_UDPHS_EPTFIFO_READEPT9 (AT91_CAST(AT91_REG *) 	0x00B90000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 9
#define AT91C_UDPHS_EPTFIFO_READEPTF (AT91_CAST(AT91_REG *) 	0x00BF0000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 15
#define AT91C_UDPHS_EPTFIFO_READEPTE (AT91_CAST(AT91_REG *) 	0x00BE0000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 14
#define AT91C_UDPHS_EPTFIFO_READEPT1 (AT91_CAST(AT91_REG *) 	0x00B10000) // (UDPHS_EPTFIFO) FIFO Endpoint Data Register 1
// ========== Register definition for UDPHS_EPT_0 peripheral ========== 
#define AT91C_UDPHS_EPT_0_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC108) // (UDPHS_EPT_0) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_0_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC11C) // (UDPHS_EPT_0) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_0_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC104) // (UDPHS_EPT_0) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_0_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC114) // (UDPHS_EPT_0) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_0_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC10C) // (UDPHS_EPT_0) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_0_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC100) // (UDPHS_EPT_0) UDPHS Endpoint Config Register
#define AT91C_UDPHS_EPT_0_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC118) // (UDPHS_EPT_0) UDPHS Endpoint Clear Status Register
// ========== Register definition for UDPHS_EPT_1 peripheral ========== 
#define AT91C_UDPHS_EPT_1_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC13C) // (UDPHS_EPT_1) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_1_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC120) // (UDPHS_EPT_1) UDPHS Endpoint Config Register
#define AT91C_UDPHS_EPT_1_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC128) // (UDPHS_EPT_1) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_1_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC134) // (UDPHS_EPT_1) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_1_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC124) // (UDPHS_EPT_1) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_1_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC138) // (UDPHS_EPT_1) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_1_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC12C) // (UDPHS_EPT_1) UDPHS Endpoint Control Register
// ========== Register definition for UDPHS_EPT_2 peripheral ========== 
#define AT91C_UDPHS_EPT_2_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC15C) // (UDPHS_EPT_2) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_2_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC14C) // (UDPHS_EPT_2) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_2_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC144) // (UDPHS_EPT_2) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_2_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC140) // (UDPHS_EPT_2) UDPHS Endpoint Config Register
#define AT91C_UDPHS_EPT_2_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC158) // (UDPHS_EPT_2) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_2_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC154) // (UDPHS_EPT_2) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_2_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC148) // (UDPHS_EPT_2) UDPHS Endpoint Control Disable Register
// ========== Register definition for UDPHS_EPT_3 peripheral ========== 
#define AT91C_UDPHS_EPT_3_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC16C) // (UDPHS_EPT_3) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_3_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC174) // (UDPHS_EPT_3) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_3_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC178) // (UDPHS_EPT_3) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_3_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC160) // (UDPHS_EPT_3) UDPHS Endpoint Config Register
#define AT91C_UDPHS_EPT_3_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC164) // (UDPHS_EPT_3) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_3_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC17C) // (UDPHS_EPT_3) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_3_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC168) // (UDPHS_EPT_3) UDPHS Endpoint Control Disable Register
// ========== Register definition for UDPHS_EPT_4 peripheral ========== 
#define AT91C_UDPHS_EPT_4_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC198) // (UDPHS_EPT_4) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_4_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC18C) // (UDPHS_EPT_4) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_4_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC188) // (UDPHS_EPT_4) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_4_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC194) // (UDPHS_EPT_4) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_4_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC19C) // (UDPHS_EPT_4) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_4_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC184) // (UDPHS_EPT_4) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_4_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC180) // (UDPHS_EPT_4) UDPHS Endpoint Config Register
// ========== Register definition for UDPHS_EPT_5 peripheral ========== 
#define AT91C_UDPHS_EPT_5_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC1B4) // (UDPHS_EPT_5) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_5_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC1A0) // (UDPHS_EPT_5) UDPHS Endpoint Config Register
#define AT91C_UDPHS_EPT_5_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC1BC) // (UDPHS_EPT_5) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_5_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC1AC) // (UDPHS_EPT_5) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_5_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC1A8) // (UDPHS_EPT_5) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_5_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC1B8) // (UDPHS_EPT_5) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_5_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC1A4) // (UDPHS_EPT_5) UDPHS Endpoint Control Enable Register
// ========== Register definition for UDPHS_EPT_6 peripheral ========== 
#define AT91C_UDPHS_EPT_6_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC1D8) // (UDPHS_EPT_6) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_6_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC1CC) // (UDPHS_EPT_6) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_6_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC1C8) // (UDPHS_EPT_6) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_6_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC1C4) // (UDPHS_EPT_6) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_6_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC1D4) // (UDPHS_EPT_6) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_6_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC1C0) // (UDPHS_EPT_6) UDPHS Endpoint Config Register
#define AT91C_UDPHS_EPT_6_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC1DC) // (UDPHS_EPT_6) UDPHS Endpoint Status Register
// ========== Register definition for UDPHS_EPT_7 peripheral ========== 
#define AT91C_UDPHS_EPT_7_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC1E0) // (UDPHS_EPT_7) UDPHS Endpoint Config Register
#define AT91C_UDPHS_EPT_7_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC1EC) // (UDPHS_EPT_7) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_7_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC1E4) // (UDPHS_EPT_7) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_7_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC1F4) // (UDPHS_EPT_7) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_7_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC1FC) // (UDPHS_EPT_7) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_7_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC1F8) // (UDPHS_EPT_7) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_7_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC1E8) // (UDPHS_EPT_7) UDPHS Endpoint Control Disable Register
// ========== Register definition for UDPHS_EPT_8 peripheral ========== 
#define AT91C_UDPHS_EPT_8_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC214) // (UDPHS_EPT_8) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_8_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC208) // (UDPHS_EPT_8) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_8_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC21C) // (UDPHS_EPT_8) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_8_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC218) // (UDPHS_EPT_8) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_8_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC204) // (UDPHS_EPT_8) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_8_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC200) // (UDPHS_EPT_8) UDPHS Endpoint Config Register
#define AT91C_UDPHS_EPT_8_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC20C) // (UDPHS_EPT_8) UDPHS Endpoint Control Register
// ========== Register definition for UDPHS_EPT_9 peripheral ========== 
#define AT91C_UDPHS_EPT_9_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC234) // (UDPHS_EPT_9) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_9_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC23C) // (UDPHS_EPT_9) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_9_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC228) // (UDPHS_EPT_9) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_9_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC22C) // (UDPHS_EPT_9) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_9_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC238) // (UDPHS_EPT_9) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_9_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC224) // (UDPHS_EPT_9) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_9_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC220) // (UDPHS_EPT_9) UDPHS Endpoint Config Register
// ========== Register definition for UDPHS_EPT_10 peripheral ========== 
#define AT91C_UDPHS_EPT_10_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC254) // (UDPHS_EPT_10) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_10_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC240) // (UDPHS_EPT_10) UDPHS Endpoint Config Register
#define AT91C_UDPHS_EPT_10_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC25C) // (UDPHS_EPT_10) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_10_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC24C) // (UDPHS_EPT_10) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_10_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC248) // (UDPHS_EPT_10) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_10_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC258) // (UDPHS_EPT_10) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_10_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC244) // (UDPHS_EPT_10) UDPHS Endpoint Control Enable Register
// ========== Register definition for UDPHS_EPT_11 peripheral ========== 
#define AT91C_UDPHS_EPT_11_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC27C) // (UDPHS_EPT_11) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_11_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC274) // (UDPHS_EPT_11) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_11_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC268) // (UDPHS_EPT_11) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_11_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC264) // (UDPHS_EPT_11) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_11_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC278) // (UDPHS_EPT_11) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_11_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC26C) // (UDPHS_EPT_11) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_11_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC260) // (UDPHS_EPT_11) UDPHS Endpoint Config Register
// ========== Register definition for UDPHS_EPT_12 peripheral ========== 
#define AT91C_UDPHS_EPT_12_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC294) // (UDPHS_EPT_12) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_12_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC284) // (UDPHS_EPT_12) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_12_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC298) // (UDPHS_EPT_12) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_12_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC28C) // (UDPHS_EPT_12) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_12_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC280) // (UDPHS_EPT_12) UDPHS Endpoint Config Register
#define AT91C_UDPHS_EPT_12_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC288) // (UDPHS_EPT_12) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_12_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC29C) // (UDPHS_EPT_12) UDPHS Endpoint Status Register
// ========== Register definition for UDPHS_EPT_13 peripheral ========== 
#define AT91C_UDPHS_EPT_13_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC2B4) // (UDPHS_EPT_13) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_13_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC2B8) // (UDPHS_EPT_13) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_13_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC2AC) // (UDPHS_EPT_13) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_13_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC2A4) // (UDPHS_EPT_13) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_13_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC2BC) // (UDPHS_EPT_13) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_13_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC2A8) // (UDPHS_EPT_13) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_13_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC2A0) // (UDPHS_EPT_13) UDPHS Endpoint Config Register
// ========== Register definition for UDPHS_EPT_14 peripheral ========== 
#define AT91C_UDPHS_EPT_14_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC2CC) // (UDPHS_EPT_14) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_14_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC2D8) // (UDPHS_EPT_14) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_14_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC2C0) // (UDPHS_EPT_14) UDPHS Endpoint Config Register
#define AT91C_UDPHS_EPT_14_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC2C4) // (UDPHS_EPT_14) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_14_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC2DC) // (UDPHS_EPT_14) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_14_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC2D4) // (UDPHS_EPT_14) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_14_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC2C8) // (UDPHS_EPT_14) UDPHS Endpoint Control Disable Register
// ========== Register definition for UDPHS_EPT_15 peripheral ========== 
#define AT91C_UDPHS_EPT_15_EPTCTL (AT91_CAST(AT91_REG *) 	0xFFFCC2EC) // (UDPHS_EPT_15) UDPHS Endpoint Control Register
#define AT91C_UDPHS_EPT_15_EPTCTLENB (AT91_CAST(AT91_REG *) 	0xFFFCC2E4) // (UDPHS_EPT_15) UDPHS Endpoint Control Enable Register
#define AT91C_UDPHS_EPT_15_EPTCTLDIS (AT91_CAST(AT91_REG *) 	0xFFFCC2E8) // (UDPHS_EPT_15) UDPHS Endpoint Control Disable Register
#define AT91C_UDPHS_EPT_15_EPTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC2FC) // (UDPHS_EPT_15) UDPHS Endpoint Status Register
#define AT91C_UDPHS_EPT_15_EPTCLRSTA (AT91_CAST(AT91_REG *) 	0xFFFCC2F8) // (UDPHS_EPT_15) UDPHS Endpoint Clear Status Register
#define AT91C_UDPHS_EPT_15_EPTSETSTA (AT91_CAST(AT91_REG *) 	0xFFFCC2F4) // (UDPHS_EPT_15) UDPHS Endpoint Set Status Register
#define AT91C_UDPHS_EPT_15_EPTCFG (AT91_CAST(AT91_REG *) 	0xFFFCC2E0) // (UDPHS_EPT_15) UDPHS Endpoint Config Register
// ========== Register definition for UDPHS_DMA_1 peripheral ========== 
#define AT91C_UDPHS_DMA_1_DMAADDRESS (AT91_CAST(AT91_REG *) 	0xFFFCC314) // (UDPHS_DMA_1) UDPHS DMA Channel Address Register
#define AT91C_UDPHS_DMA_1_DMACONTROL (AT91_CAST(AT91_REG *) 	0xFFFCC318) // (UDPHS_DMA_1) UDPHS DMA Channel Control Register
#define AT91C_UDPHS_DMA_1_DMASTATUS (AT91_CAST(AT91_REG *) 	0xFFFCC31C) // (UDPHS_DMA_1) UDPHS DMA Channel Status Register
#define AT91C_UDPHS_DMA_1_DMANXTDSC (AT91_CAST(AT91_REG *) 	0xFFFCC310) // (UDPHS_DMA_1) UDPHS DMA Channel Next Descriptor Address
// ========== Register definition for UDPHS_DMA_2 peripheral ========== 
#define AT91C_UDPHS_DMA_2_DMANXTDSC (AT91_CAST(AT91_REG *) 	0xFFFCC320) // (UDPHS_DMA_2) UDPHS DMA Channel Next Descriptor Address
#define AT91C_UDPHS_DMA_2_DMAADDRESS (AT91_CAST(AT91_REG *) 	0xFFFCC324) // (UDPHS_DMA_2) UDPHS DMA Channel Address Register
#define AT91C_UDPHS_DMA_2_DMACONTROL (AT91_CAST(AT91_REG *) 	0xFFFCC328) // (UDPHS_DMA_2) UDPHS DMA Channel Control Register
#define AT91C_UDPHS_DMA_2_DMASTATUS (AT91_CAST(AT91_REG *) 	0xFFFCC32C) // (UDPHS_DMA_2) UDPHS DMA Channel Status Register
// ========== Register definition for UDPHS_DMA_3 peripheral ========== 
#define AT91C_UDPHS_DMA_3_DMANXTDSC (AT91_CAST(AT91_REG *) 	0xFFFCC330) // (UDPHS_DMA_3) UDPHS DMA Channel Next Descriptor Address
#define AT91C_UDPHS_DMA_3_DMASTATUS (AT91_CAST(AT91_REG *) 	0xFFFCC33C) // (UDPHS_DMA_3) UDPHS DMA Channel Status Register
#define AT91C_UDPHS_DMA_3_DMACONTROL (AT91_CAST(AT91_REG *) 	0xFFFCC338) // (UDPHS_DMA_3) UDPHS DMA Channel Control Register
#define AT91C_UDPHS_DMA_3_DMAADDRESS (AT91_CAST(AT91_REG *) 	0xFFFCC334) // (UDPHS_DMA_3) UDPHS DMA Channel Address Register
// ========== Register definition for UDPHS_DMA_4 peripheral ========== 
#define AT91C_UDPHS_DMA_4_DMAADDRESS (AT91_CAST(AT91_REG *) 	0xFFFCC344) // (UDPHS_DMA_4) UDPHS DMA Channel Address Register
#define AT91C_UDPHS_DMA_4_DMACONTROL (AT91_CAST(AT91_REG *) 	0xFFFCC348) // (UDPHS_DMA_4) UDPHS DMA Channel Control Register
#define AT91C_UDPHS_DMA_4_DMASTATUS (AT91_CAST(AT91_REG *) 	0xFFFCC34C) // (UDPHS_DMA_4) UDPHS DMA Channel Status Register
#define AT91C_UDPHS_DMA_4_DMANXTDSC (AT91_CAST(AT91_REG *) 	0xFFFCC340) // (UDPHS_DMA_4) UDPHS DMA Channel Next Descriptor Address
// ========== Register definition for UDPHS_DMA_5 peripheral ========== 
#define AT91C_UDPHS_DMA_5_DMAADDRESS (AT91_CAST(AT91_REG *) 	0xFFFCC354) // (UDPHS_DMA_5) UDPHS DMA Channel Address Register
#define AT91C_UDPHS_DMA_5_DMASTATUS (AT91_CAST(AT91_REG *) 	0xFFFCC35C) // (UDPHS_DMA_5) UDPHS DMA Channel Status Register
#define AT91C_UDPHS_DMA_5_DMACONTROL (AT91_CAST(AT91_REG *) 	0xFFFCC358) // (UDPHS_DMA_5) UDPHS DMA Channel Control Register
#define AT91C_UDPHS_DMA_5_DMANXTDSC (AT91_CAST(AT91_REG *) 	0xFFFCC350) // (UDPHS_DMA_5) UDPHS DMA Channel Next Descriptor Address
// ========== Register definition for UDPHS_DMA_6 peripheral ========== 
#define AT91C_UDPHS_DMA_6_DMASTATUS (AT91_CAST(AT91_REG *) 	0xFFFCC36C) // (UDPHS_DMA_6) UDPHS DMA Channel Status Register
#define AT91C_UDPHS_DMA_6_DMAADDRESS (AT91_CAST(AT91_REG *) 	0xFFFCC364) // (UDPHS_DMA_6) UDPHS DMA Channel Address Register
#define AT91C_UDPHS_DMA_6_DMANXTDSC (AT91_CAST(AT91_REG *) 	0xFFFCC360) // (UDPHS_DMA_6) UDPHS DMA Channel Next Descriptor Address
#define AT91C_UDPHS_DMA_6_DMACONTROL (AT91_CAST(AT91_REG *) 	0xFFFCC368) // (UDPHS_DMA_6) UDPHS DMA Channel Control Register
// ========== Register definition for UDPHS_DMA_7 peripheral ========== 
#define AT91C_UDPHS_DMA_7_DMACONTROL (AT91_CAST(AT91_REG *) 	0xFFFCC378) // (UDPHS_DMA_7) UDPHS DMA Channel Control Register
#define AT91C_UDPHS_DMA_7_DMASTATUS (AT91_CAST(AT91_REG *) 	0xFFFCC37C) // (UDPHS_DMA_7) UDPHS DMA Channel Status Register
#define AT91C_UDPHS_DMA_7_DMANXTDSC (AT91_CAST(AT91_REG *) 	0xFFFCC370) // (UDPHS_DMA_7) UDPHS DMA Channel Next Descriptor Address
#define AT91C_UDPHS_DMA_7_DMAADDRESS (AT91_CAST(AT91_REG *) 	0xFFFCC374) // (UDPHS_DMA_7) UDPHS DMA Channel Address Register
// ========== Register definition for UDPHS peripheral ========== 
#define AT91C_UDPHS_EPTRST (AT91_CAST(AT91_REG *) 	0xFFFCC01C) // (UDPHS) UDPHS Endpoints Reset Register
#define AT91C_UDPHS_CLRINT (AT91_CAST(AT91_REG *) 	0xFFFCC018) // (UDPHS) UDPHS Clear Interrupt Register
#define AT91C_UDPHS_IPFEATURES (AT91_CAST(AT91_REG *) 	0xFFFCC0F8) // (UDPHS) UDPHS Features Register
#define AT91C_UDPHS_TST (AT91_CAST(AT91_REG *) 	0xFFFCC0E0) // (UDPHS) UDPHS Test Register
#define AT91C_UDPHS_TSTSOFCNT (AT91_CAST(AT91_REG *) 	0xFFFCC0D0) // (UDPHS) UDPHS Test SOF Counter Register
#define AT91C_UDPHS_RIPNAME2 (AT91_CAST(AT91_REG *) 	0xFFFCC0F4) // (UDPHS) UDPHS Name2 Register
#define AT91C_UDPHS_FNUM (AT91_CAST(AT91_REG *) 	0xFFFCC004) // (UDPHS) UDPHS Frame Number Register
#define AT91C_UDPHS_INTSTA (AT91_CAST(AT91_REG *) 	0xFFFCC014) // (UDPHS) UDPHS Interrupt Status Register
#define AT91C_UDPHS_IEN (AT91_CAST(AT91_REG *) 	0xFFFCC010) // (UDPHS) UDPHS Interrupt Enable Register
#define AT91C_UDPHS_RIPNAME1 (AT91_CAST(AT91_REG *) 	0xFFFCC0F0) // (UDPHS) UDPHS Name1 Register
#define AT91C_UDPHS_TSTMODREG (AT91_CAST(AT91_REG *) 	0xFFFCC0DC) // (UDPHS) UDPHS Test Mode Register
#define AT91C_UDPHS_IPVERSION (AT91_CAST(AT91_REG *) 	0xFFFCC0FC) // (UDPHS) UDPHS Version Register
#define AT91C_UDPHS_TSTCNTB (AT91_CAST(AT91_REG *) 	0xFFFCC0D8) // (UDPHS) UDPHS Test B Counter Register
#define AT91C_UDPHS_RIPPADDRSIZE (AT91_CAST(AT91_REG *) 	0xFFFCC0EC) // (UDPHS) UDPHS PADDRSIZE Register
#define AT91C_UDPHS_CTRL (AT91_CAST(AT91_REG *) 	0xFFFCC000) // (UDPHS) UDPHS Control Register
#define AT91C_UDPHS_TSTCNTA (AT91_CAST(AT91_REG *) 	0xFFFCC0D4) // (UDPHS) UDPHS Test A Counter Register
// ========== Register definition for UHP peripheral ========== 
#define AT91C_UHP_HcRhDescriptorA (AT91_CAST(AT91_REG *) 	0x00A00048) // (UHP) Root Hub characteristics A
#define AT91C_UHP_HcInterruptStatus (AT91_CAST(AT91_REG *) 	0x00A0000C) // (UHP) Interrupt Status Register
#define AT91C_UHP_HcLSThreshold (AT91_CAST(AT91_REG *) 	0x00A00044) // (UHP) LS Threshold
#define AT91C_UHP_HcBulkDoneHead (AT91_CAST(AT91_REG *) 	0x00A00030) // (UHP) Last completed transfer descriptor
#define AT91C_UHP_HcInterruptDisable (AT91_CAST(AT91_REG *) 	0x00A00014) // (UHP) Interrupt Disable Register
#define AT91C_UHP_HcRhPortStatus (AT91_CAST(AT91_REG *) 	0x00A00054) // (UHP) Root Hub Port Status Register
#define AT91C_UHP_HcControl (AT91_CAST(AT91_REG *) 	0x00A00004) // (UHP) Operating modes for the Host Controller
#define AT91C_UHP_HcPeriodCurrentED (AT91_CAST(AT91_REG *) 	0x00A0001C) // (UHP) Current Isochronous or Interrupt Endpoint Descriptor
#define AT91C_UHP_HcControlHeadED (AT91_CAST(AT91_REG *) 	0x00A00020) // (UHP) First Endpoint Descriptor of the Control list
#define AT91C_UHP_HcCommandStatus (AT91_CAST(AT91_REG *) 	0x00A00008) // (UHP) Command & status Register
#define AT91C_UHP_HcFmNumber (AT91_CAST(AT91_REG *) 	0x00A0003C) // (UHP) Frame number
#define AT91C_UHP_HcRhDescriptorB (AT91_CAST(AT91_REG *) 	0x00A0004C) // (UHP) Root Hub characteristics B
#define AT91C_UHP_HcBulkHeadED (AT91_CAST(AT91_REG *) 	0x00A00028) // (UHP) First endpoint register of the Bulk list
#define AT91C_UHP_HcFmRemaining (AT91_CAST(AT91_REG *) 	0x00A00038) // (UHP) Bit time remaining in the current Frame
#define AT91C_UHP_HcRevision (AT91_CAST(AT91_REG *) 	0x00A00000) // (UHP) Revision
#define AT91C_UHP_HcInterruptEnable (AT91_CAST(AT91_REG *) 	0x00A00010) // (UHP) Interrupt Enable Register
#define AT91C_UHP_HcControlCurrentED (AT91_CAST(AT91_REG *) 	0x00A00024) // (UHP) Endpoint Control and Status Register
#define AT91C_UHP_HcBulkCurrentED (AT91_CAST(AT91_REG *) 	0x00A0002C) // (UHP) Current endpoint of the Bulk list
#define AT91C_UHP_HcHCCA (AT91_CAST(AT91_REG *) 	0x00A00018) // (UHP) Pointer to the Host Controller Communication Area
#define AT91C_UHP_HcPeriodicStart (AT91_CAST(AT91_REG *) 	0x00A00040) // (UHP) Periodic Start
#define AT91C_UHP_HcRhStatus (AT91_CAST(AT91_REG *) 	0x00A00050) // (UHP) Root Hub Status register
#define AT91C_UHP_HcFmInterval (AT91_CAST(AT91_REG *) 	0x00A00034) // (UHP) Bit time between 2 consecutive SOFs
// ========== Register definition for GPS peripheral ========== 
#define AT91C_GPS_CODENCOREG (AT91_CAST(AT91_REG *) 	0xFFFC0420) // (GPS) 
#define AT91C_GPS_STATUSREG (AT91_CAST(AT91_REG *) 	0xFFFC0408) // (GPS) 
#define AT91C_GPS_DOPSTEPREG (AT91_CAST(AT91_REG *) 	0xFFFC0438) // (GPS) 
#define AT91C_GPS_CARRNCOREG (AT91_CAST(AT91_REG *) 	0xFFFC041C) // (GPS) 
#define AT91C_GPS_ACQTESTREG (AT91_CAST(AT91_REG *) 	0xFFFC0460) // (GPS) 
#define AT91C_GPS_NAVBITLREG (AT91_CAST(AT91_REG *) 	0xFFFC0444) // (GPS) 
#define AT91C_GPS_PROCTIMEREG (AT91_CAST(AT91_REG *) 	0xFFFC0424) // (GPS) 
#define AT91C_GPS_CORRSWAP16 (AT91_CAST(AT91_REG *) 	0xFFFC0220) // (GPS) 
#define AT91C_GPS_SATREG (AT91_CAST(AT91_REG *) 	0xFFFC042C) // (GPS) 
#define AT91C_GPS_PROCNCREG (AT91_CAST(AT91_REG *) 	0xFFFC0428) // (GPS) 
#define AT91C_GPS_INITFIRSTNBREG (AT91_CAST(AT91_REG *) 	0xFFFC0440) // (GPS) 
#define AT91C_GPS_DOPENDREG (AT91_CAST(AT91_REG *) 	0xFFFC0434) // (GPS) 
#define AT91C_GPS_RESAMPREG (AT91_CAST(AT91_REG *) 	0xFFFC0450) // (GPS) 
#define AT91C_GPS_ACQTIMEREG (AT91_CAST(AT91_REG *) 	0xFFFC040C) // (GPS) 
#define AT91C_GPS_PROCTESTREG (AT91_CAST(AT91_REG *) 	0xFFFC0464) // (GPS) 
#define AT91C_GPS_PERIPHCNTRREG (AT91_CAST(AT91_REG *) 	0xFFFC0400) // (GPS) 
#define AT91C_GPS_SYNCMHREG (AT91_CAST(AT91_REG *) 	0xFFFC0418) // (GPS) 
#define AT91C_GPS_SYNCMLREG (AT91_CAST(AT91_REG *) 	0xFFFC0414) // (GPS) 
#define AT91C_GPS_NAVBITHREG (AT91_CAST(AT91_REG *) 	0xFFFC0448) // (GPS) 
#define AT91C_GPS_CORRSWAPWRITE (AT91_CAST(AT91_REG *) 	0xFFFC0224) // (GPS) 
#define AT91C_GPS_RESDOPREG (AT91_CAST(AT91_REG *) 	0xFFFC0458) // (GPS) 
#define AT91C_GPS_RESPOSREG (AT91_CAST(AT91_REG *) 	0xFFFC0454) // (GPS) 
#define AT91C_GPS_CONFIGREG (AT91_CAST(AT91_REG *) 	0xFFFC0404) // (GPS) 
#define AT91C_GPS_SEARCHWINREG (AT91_CAST(AT91_REG *) 	0xFFFC043C) // (GPS) 
#define AT91C_GPS_VERSIONREG (AT91_CAST(AT91_REG *) 	0xFFFC046C) // (GPS) GPS Engine revision register
#define AT91C_GPS_CORRSWAP32 (AT91_CAST(AT91_REG *) 	0xFFFC021C) // (GPS) 
#define AT91C_GPS_DOPSTARTREG (AT91_CAST(AT91_REG *) 	0xFFFC0430) // (GPS) 
#define AT91C_GPS_RESNOISEREG (AT91_CAST(AT91_REG *) 	0xFFFC045C) // (GPS) 
#define AT91C_GPS_PROCFIFOTHRESH (AT91_CAST(AT91_REG *) 	0xFFFC044C) // (GPS) 
#define AT91C_GPS_THRESHACQREG (AT91_CAST(AT91_REG *) 	0xFFFC0410) // (GPS) 
// ========== Register definition for TBOX peripheral ========== 
#define AT91C_TBOX_GPSSIGFILE (AT91_CAST(AT91_REG *) 	0x70000BA0) // (TBOX) GPS RFIN/DRFIN driven from files/Samples_GPS.data
#define AT91C_TBOX_PIOA (AT91_CAST(AT91_REG *) 	0x7000093C) // (TBOX) Value Of PIOA
#define AT91C_TBOX_PWM1 (AT91_CAST(AT91_REG *) 	0x70000A08) // (TBOX) PWM1[4:0]=nb pulses on pb7, PWM1[9:5]=nb pulses on pc28, PWM1[20:16]=nb pulses on pb8, PWM1[25:21]=nb pulses on pc3
#define AT91C_TBOX_PIODENABLEFORCE (AT91_CAST(AT91_REG *) 	0x7000092C) // (TBOX) If each bit is 1, the corresponding bit of PIOD is controlled by TBOX_PIODFORCEVALUE
#define AT91C_TBOX_PIODPUN (AT91_CAST(AT91_REG *) 	0x7000090C) // (TBOX) Spy on PIO PUN inputs
#define AT91C_TBOX_PIOAENABLEFORCE (AT91_CAST(AT91_REG *) 	0x70000914) // (TBOX) If each bit is 1, the corresponding bit of PIOA is controlled by TBOX_PIOAFORCEVALUE
#define AT91C_TBOX_PIOD (AT91_CAST(AT91_REG *) 	0x70000948) // (TBOX) Value Of PIOD
#define AT91C_TBOX_STOPAPBSPY (AT91_CAST(AT91_REG *) 	0x70000A1C) // (TBOX) When 1, no more APB SPY messages
#define AT91C_TBOX_PIOEENABLEFORCE (AT91_CAST(AT91_REG *) 	0x70000934) // (TBOX) If each bit is 1, the corresponding bit of PIOE is controlled by TBOX_PIOEFORCEVALUE
#define AT91C_TBOX_PIOBPUN (AT91_CAST(AT91_REG *) 	0x70000904) // (TBOX) Spy on PIO PUN inputs
#define AT91C_TBOX_USBDEV (AT91_CAST(AT91_REG *) 	0x70000A14) // (TBOX) USB device testbench : bit 0 = flag0, bit 1 = flag1
#define AT91C_TBOX_GPSRAND (AT91_CAST(AT91_REG *) 	0x70000B04) // (TBOX) GPS random data for correlator (Stimulus - Internal Node)
#define AT91C_TBOX_KBD  (AT91_CAST(AT91_REG *) 	0x70000A18) // (TBOX) Keyboard testbench : bit 0 = keypressed; bits[7:6] = key column; bits[5:4] = key row;
#define AT91C_TBOX_PIOEFORCEVALUE (AT91_CAST(AT91_REG *) 	0x70000938) // (TBOX) Value to force on PIOA when bits TBOX_PIOEENABLEFORCE are 1
#define AT91C_TBOX_AC97START (AT91_CAST(AT91_REG *) 	0x70000A00) // (TBOX) Start of AC97 test: swith PIO mux to connect PIOs to audio codec model.
#define AT91C_TBOX_PIOAPUN (AT91_CAST(AT91_REG *) 	0x70000900) // (TBOX) Spy on PIO PUN inputs
#define AT91C_TBOX_GPSACQSTATUS (AT91_CAST(AT91_REG *) 	0x70000B08) // (TBOX) GPS acquisition status (Probe - Internal Node)
#define AT91C_TBOX_PIOEPUN (AT91_CAST(AT91_REG *) 	0x70000910) // (TBOX) Spy on PIO PUN inputs
#define AT91C_TBOX_PIOE (AT91_CAST(AT91_REG *) 	0x7000094C) // (TBOX) Value Of PIOE
#define AT91C_TBOX_PIODFORCEVALUE (AT91_CAST(AT91_REG *) 	0x70000930) // (TBOX) Value to force on PIOA when bits TBOX_PIODENABLEFORCE are 1
#define AT91C_TBOX_PWMSTART (AT91_CAST(AT91_REG *) 	0x70000A04) // (TBOX) Start of PWM test: Start to count edges on PWM IOs
#define AT91C_TBOX_GPSSIGIB (AT91_CAST(AT91_REG *) 	0x70000BB0) // (TBOX) GPS DRFIN[5:4] aka SIGI_B (Stimulus)
#define AT91C_TBOX_GPSSYNCHRO (AT91_CAST(AT91_REG *) 	0x70000B00) // (TBOX) GPS synchronization (Stimulus)
#define AT91C_TBOX_PIOAFORCEVALUE (AT91_CAST(AT91_REG *) 	0x70000918) // (TBOX) Value to force on PIOA when bits TBOX_PIOAENABLEFORCE are 1
#define AT91C_TBOX_GPSACQDATA (AT91_CAST(AT91_REG *) 	0x70000B0C) // (TBOX) GPS acquisition data (Probe - Internal Node)
#define AT91C_TBOX_SHMCTRL (AT91_CAST(AT91_REG *) 	0x70000000) // (TBOX) SHM Probe Control: 0-> shm probe stopped, 1: shm probe started
#define AT91C_TBOX_MAC  (AT91_CAST(AT91_REG *) 	0x70000A10) // (TBOX) MAC testbench : bit 0 = rxtrig, bit 1 = clkofftester, bit 2 = err_sig_loops
#define AT91C_TBOX_GPSSIGIA (AT91_CAST(AT91_REG *) 	0x70000BA4) // (TBOX) GPS DRFIN[1:0] aka SIGI_A (Stimulus)
#define AT91C_TBOX_PIOBFORCEVALUE (AT91_CAST(AT91_REG *) 	0x70000920) // (TBOX) Value to force on PIOA when bits TBOX_PIOBENABLEFORCE are 1
#define AT91C_TBOX_PIOCPUN (AT91_CAST(AT91_REG *) 	0x70000908) // (TBOX) Spy on PIO PUN inputs
#define AT91C_TBOX_PIOCFORCEVALUE (AT91_CAST(AT91_REG *) 	0x70000928) // (TBOX) Value to force on PIOA when bits TBOX_PIOCENABLEFORCE are 1
#define AT91C_TBOX_PIOC (AT91_CAST(AT91_REG *) 	0x70000944) // (TBOX) Value Of PIOC
#define AT91C_TBOX_DMAEXTREQ (AT91_CAST(AT91_REG *) 	0x70000810) // (TBOX) DMA External request lines 3 to 0
#define AT91C_TBOX_GPSDUMPRES (AT91_CAST(AT91_REG *) 	0x70000BC0) // (TBOX) GPS Dump results and errors
#define AT91C_TBOX_PIOCENABLEFORCE (AT91_CAST(AT91_REG *) 	0x70000924) // (TBOX) If each bit is 1, the corresponding bit of PIOC is controlled by TBOX_PIOCFORCEVALUE
#define AT91C_TBOX_PWM2 (AT91_CAST(AT91_REG *) 	0x70000A0C) // (TBOX) PWM2[3:0]=nb pulses on pb27, PWM2[7:4]=nb pulses on pc29, PWM2[19:16]=nb pulses on pb29, PWM2[23:20]=nb pulses on pe10
#define AT91C_TBOX_GPSSIGQA (AT91_CAST(AT91_REG *) 	0x70000BA8) // (TBOX) GPS DRFIN[3:2] aka SIGQ_A (Stimulus)
#define AT91C_TBOX_PIOB (AT91_CAST(AT91_REG *) 	0x70000940) // (TBOX) Value Of PIOB
#define AT91C_TBOX_PIOBENABLEFORCE (AT91_CAST(AT91_REG *) 	0x7000091C) // (TBOX) If each bit is 1, the corresponding bit of PIOB is controlled by TBOX_PIOBFORCEVALUE
#define AT91C_TBOX_GPSSIGQB (AT91_CAST(AT91_REG *) 	0x70000BB4) // (TBOX) GPS DRFIN[7:6] aka SIGQ_B (Stimulus)
// ========== Register definition for AES peripheral ========== 
#define AT91C_AES_VR    (AT91_CAST(AT91_REG *) 	0xFFFB00FC) // (AES) AES Version Register
#define AT91C_AES_IMR   (AT91_CAST(AT91_REG *) 	0xFFFB0018) // (AES) Interrupt Mask Register
#define AT91C_AES_CR    (AT91_CAST(AT91_REG *) 	0xFFFB0000) // (AES) Control Register
#define AT91C_AES_ODATAxR (AT91_CAST(AT91_REG *) 	0xFFFB0050) // (AES) Output Data x Register
#define AT91C_AES_ISR   (AT91_CAST(AT91_REG *) 	0xFFFB001C) // (AES) Interrupt Status Register
#define AT91C_AES_IDR   (AT91_CAST(AT91_REG *) 	0xFFFB0014) // (AES) Interrupt Disable Register
#define AT91C_AES_KEYWxR (AT91_CAST(AT91_REG *) 	0xFFFB0020) // (AES) Key Word x Register
#define AT91C_AES_IVxR  (AT91_CAST(AT91_REG *) 	0xFFFB0060) // (AES) Initialization Vector x Register
#define AT91C_AES_MR    (AT91_CAST(AT91_REG *) 	0xFFFB0004) // (AES) Mode Register
#define AT91C_AES_IDATAxR (AT91_CAST(AT91_REG *) 	0xFFFB0040) // (AES) Input Data x Register
#define AT91C_AES_IER   (AT91_CAST(AT91_REG *) 	0xFFFB0010) // (AES) Interrupt Enable Register
// ========== Register definition for PDC_AES peripheral ========== 
#define AT91C_AES_TCR   (AT91_CAST(AT91_REG *) 	0xFFFB010C) // (PDC_AES) Transmit Counter Register
#define AT91C_AES_PTCR  (AT91_CAST(AT91_REG *) 	0xFFFB0120) // (PDC_AES) PDC Transfer Control Register
#define AT91C_AES_RNCR  (AT91_CAST(AT91_REG *) 	0xFFFB0114) // (PDC_AES) Receive Next Counter Register
#define AT91C_AES_PTSR  (AT91_CAST(AT91_REG *) 	0xFFFB0124) // (PDC_AES) PDC Transfer Status Register
#define AT91C_AES_TNCR  (AT91_CAST(AT91_REG *) 	0xFFFB011C) // (PDC_AES) Transmit Next Counter Register
#define AT91C_AES_RNPR  (AT91_CAST(AT91_REG *) 	0xFFFB0110) // (PDC_AES) Receive Next Pointer Register
#define AT91C_AES_RCR   (AT91_CAST(AT91_REG *) 	0xFFFB0104) // (PDC_AES) Receive Counter Register
#define AT91C_AES_TPR   (AT91_CAST(AT91_REG *) 	0xFFFB0108) // (PDC_AES) Transmit Pointer Register
#define AT91C_AES_TNPR  (AT91_CAST(AT91_REG *) 	0xFFFB0118) // (PDC_AES) Transmit Next Pointer Register
#define AT91C_AES_RPR   (AT91_CAST(AT91_REG *) 	0xFFFB0100) // (PDC_AES) Receive Pointer Register
// ========== Register definition for HECC0 peripheral ========== 
#define AT91C_HECC0_SR  (AT91_CAST(AT91_REG *) 	0xFFFFE008) // (HECC0)  ECC Status register
#define AT91C_HECC0_VR  (AT91_CAST(AT91_REG *) 	0xFFFFE0FC) // (HECC0)  ECC Version register
#define AT91C_HECC0_CR  (AT91_CAST(AT91_REG *) 	0xFFFFE000) // (HECC0)  ECC reset register
#define AT91C_HECC0_PR  (AT91_CAST(AT91_REG *) 	0xFFFFE00C) // (HECC0)  ECC Parity register
#define AT91C_HECC0_MR  (AT91_CAST(AT91_REG *) 	0xFFFFE004) // (HECC0)  ECC Page size register
#define AT91C_HECC0_NPR (AT91_CAST(AT91_REG *) 	0xFFFFE010) // (HECC0)  ECC Parity N register
// ========== Register definition for HECC1 peripheral ========== 
#define AT91C_HECC1_MR  (AT91_CAST(AT91_REG *) 	0xFFFFE604) // (HECC1)  ECC Page size register
#define AT91C_HECC1_VR  (AT91_CAST(AT91_REG *) 	0xFFFFE6FC) // (HECC1)  ECC Version register
#define AT91C_HECC1_PR  (AT91_CAST(AT91_REG *) 	0xFFFFE60C) // (HECC1)  ECC Parity register
#define AT91C_HECC1_CR  (AT91_CAST(AT91_REG *) 	0xFFFFE600) // (HECC1)  ECC reset register
#define AT91C_HECC1_NPR (AT91_CAST(AT91_REG *) 	0xFFFFE610) // (HECC1)  ECC Parity N register
#define AT91C_HECC1_SR  (AT91_CAST(AT91_REG *) 	0xFFFFE608) // (HECC1)  ECC Status register
// ========== Register definition for HISI peripheral ========== 
#define AT91C_HISI_CDBA (AT91_CAST(AT91_REG *) 	0xFFFC402C) // (HISI) Codec Dma Address Register
#define AT91C_HISI_PDECF (AT91_CAST(AT91_REG *) 	0xFFFC4024) // (HISI) Preview Decimation Factor Register
#define AT91C_HISI_IMR  (AT91_CAST(AT91_REG *) 	0xFFFC4014) // (HISI) Interrupt Mask Register
#define AT91C_HISI_IER  (AT91_CAST(AT91_REG *) 	0xFFFC400C) // (HISI) Interrupt Enable Register
#define AT91C_HISI_SR   (AT91_CAST(AT91_REG *) 	0xFFFC4008) // (HISI) Status Register
#define AT91C_HISI_Y2RSET0 (AT91_CAST(AT91_REG *) 	0xFFFC4030) // (HISI) Color Space Conversion Register
#define AT91C_HISI_PPFBD (AT91_CAST(AT91_REG *) 	0xFFFC4028) // (HISI) Preview Frame Buffer Address Register
#define AT91C_HISI_PSIZE (AT91_CAST(AT91_REG *) 	0xFFFC4020) // (HISI) Preview Size Register
#define AT91C_HISI_IDR  (AT91_CAST(AT91_REG *) 	0xFFFC4010) // (HISI) Interrupt Disable Register
#define AT91C_HISI_R2YSET2 (AT91_CAST(AT91_REG *) 	0xFFFC4040) // (HISI) Color Space Conversion Register
#define AT91C_HISI_R2YSET0 (AT91_CAST(AT91_REG *) 	0xFFFC4038) // (HISI) Color Space Conversion Register
#define AT91C_HISI_CR1  (AT91_CAST(AT91_REG *) 	0xFFFC4000) // (HISI) Control Register 1
#define AT91C_HISI_CR2  (AT91_CAST(AT91_REG *) 	0xFFFC4004) // (HISI) Control Register 2
#define AT91C_HISI_Y2RSET1 (AT91_CAST(AT91_REG *) 	0xFFFC4034) // (HISI) Color Space Conversion Register
#define AT91C_HISI_R2YSET1 (AT91_CAST(AT91_REG *) 	0xFFFC403C) // (HISI) Color Space Conversion Register

// *****************************************************************************
//               PIO DEFINITIONS FOR AT91SAM9265
// *****************************************************************************
#define AT91C_PIO_PA0        (1 <<  0) // Pin Controlled by PA0
#define AT91C_PA0_MCI0_DA0 (AT91C_PIO_PA0) //  
#define AT91C_PA0_SPI0_MISO (AT91C_PIO_PA0) //  
#define AT91C_PIO_PA1        (1 <<  1) // Pin Controlled by PA1
#define AT91C_PA1_MCI0_CDA (AT91C_PIO_PA1) //  
#define AT91C_PA1_SPI0_MOSI (AT91C_PIO_PA1) //  
#define AT91C_PIO_PA10       (1 << 10) // Pin Controlled by PA10
#define AT91C_PA10_MCI1_DA2 (AT91C_PIO_PA10) //  
#define AT91C_PIO_PA11       (1 << 11) // Pin Controlled by PA11
#define AT91C_PA11_MCI1_DA3 (AT91C_PIO_PA11) //  
#define AT91C_PIO_PA12       (1 << 12) // Pin Controlled by PA12
#define AT91C_PA12_MCI0_CK  (AT91C_PIO_PA12) //  
#define AT91C_PIO_PA13       (1 << 13) // Pin Controlled by PA13
#define AT91C_PA13_CANTX    (AT91C_PIO_PA13) //  
#define AT91C_PA13_PCK0     (AT91C_PIO_PA13) //  
#define AT91C_PIO_PA14       (1 << 14) // Pin Controlled by PA14
#define AT91C_PA14_CANRX    (AT91C_PIO_PA14) //  
#define AT91C_PA14_IRQ0     (AT91C_PIO_PA14) //  
#define AT91C_PIO_PA15       (1 << 15) // Pin Controlled by PA15
#define AT91C_PA15_TCLK2    (AT91C_PIO_PA15) //  
#define AT91C_PA15_IRQ1     (AT91C_PIO_PA15) //  
#define AT91C_PIO_PA16       (1 << 16) // Pin Controlled by PA16
#define AT91C_PA16_MCI0_CDB (AT91C_PIO_PA16) //  
#define AT91C_PA16_EBI1_D16 (AT91C_PIO_PA16) //  
#define AT91C_PIO_PA17       (1 << 17) // Pin Controlled by PA17
#define AT91C_PA17_MCI0_DB0 (AT91C_PIO_PA17) //  
#define AT91C_PA17_EBI1_D17 (AT91C_PIO_PA17) //  
#define AT91C_PIO_PA18       (1 << 18) // Pin Controlled by PA18
#define AT91C_PA18_MCI0_DB1 (AT91C_PIO_PA18) //  
#define AT91C_PA18_EBI1_D18 (AT91C_PIO_PA18) //  
#define AT91C_PIO_PA19       (1 << 19) // Pin Controlled by PA19
#define AT91C_PA19_MCI0_DB2 (AT91C_PIO_PA19) //  
#define AT91C_PA19_EBI1_D19 (AT91C_PIO_PA19) //  
#define AT91C_PIO_PA2        (1 <<  2) // Pin Controlled by PA2
#define AT91C_PA2_UNCONNECTED_PA2_A (AT91C_PIO_PA2) //  
#define AT91C_PA2_SPI0_SPCK (AT91C_PIO_PA2) //  
#define AT91C_PIO_PA20       (1 << 20) // Pin Controlled by PA20
#define AT91C_PA20_MCI0_DB3 (AT91C_PIO_PA20) //  
#define AT91C_PA20_EBI1_D20 (AT91C_PIO_PA20) //  
#define AT91C_PIO_PA21       (1 << 21) // Pin Controlled by PA21
#define AT91C_PA21_MCI1_CDB (AT91C_PIO_PA21) //  
#define AT91C_PA21_EBI1_D21 (AT91C_PIO_PA21) //  
#define AT91C_PIO_PA22       (1 << 22) // Pin Controlled by PA22
#define AT91C_PA22_MCI1_DB0 (AT91C_PIO_PA22) //  
#define AT91C_PA22_EBI1_D22 (AT91C_PIO_PA22) //  
#define AT91C_PIO_PA23       (1 << 23) // Pin Controlled by PA23
#define AT91C_PA23_MCI1_DB1 (AT91C_PIO_PA23) //  
#define AT91C_PA23_EBI1_D23 (AT91C_PIO_PA23) //  
#define AT91C_PIO_PA24       (1 << 24) // Pin Controlled by PA24
#define AT91C_PA24_MCI1_DB2 (AT91C_PIO_PA24) //  
#define AT91C_PA24_EBI1_D24 (AT91C_PIO_PA24) //  
#define AT91C_PIO_PA25       (1 << 25) // Pin Controlled by PA25
#define AT91C_PA25_MCI1_DB3 (AT91C_PIO_PA25) //  
#define AT91C_PA25_EBI1_D25 (AT91C_PIO_PA25) //  
#define AT91C_PIO_PA26       (1 << 26) // Pin Controlled by PA26
#define AT91C_PA26_TXD0     (AT91C_PIO_PA26) //  
#define AT91C_PA26_EBI1_D26 (AT91C_PIO_PA26) //  
#define AT91C_PIO_PA27       (1 << 27) // Pin Controlled by PA27
#define AT91C_PA27_RXD0     (AT91C_PIO_PA27) //  
#define AT91C_PA27_EBI1_D27 (AT91C_PIO_PA27) //  
#define AT91C_PIO_PA28       (1 << 28) // Pin Controlled by PA28
#define AT91C_PA28_RTS0     (AT91C_PIO_PA28) //  
#define AT91C_PA28_EBI1_D28 (AT91C_PIO_PA28) //  
#define AT91C_PIO_PA29       (1 << 29) // Pin Controlled by PA29
#define AT91C_PA29_CTS0     (AT91C_PIO_PA29) //  
#define AT91C_PA29_EBI1_D29 (AT91C_PIO_PA29) //  
#define AT91C_PIO_PA3        (1 <<  3) // Pin Controlled by PA3
#define AT91C_PA3_MCI0_DA1 (AT91C_PIO_PA3) //  
#define AT91C_PA3_SPI0_NPCS1 (AT91C_PIO_PA3) //  
#define AT91C_PIO_PA30       (1 << 30) // Pin Controlled by PA30
#define AT91C_PA30_SCK0     (AT91C_PIO_PA30) //  
#define AT91C_PA30_EBI1_D30 (AT91C_PIO_PA30) //  
#define AT91C_PIO_PA31       (1 << 31) // Pin Controlled by PA31
#define AT91C_PA31_DMARQ0   (AT91C_PIO_PA31) //  
#define AT91C_PA31_EBI1_D31 (AT91C_PIO_PA31) //  
#define AT91C_PIO_PA4        (1 <<  4) // Pin Controlled by PA4
#define AT91C_PA4_MCI0_DA2 (AT91C_PIO_PA4) //  
#define AT91C_PA4_SPI0_NPCS2A (AT91C_PIO_PA4) //  
#define AT91C_PIO_PA5        (1 <<  5) // Pin Controlled by PA5
#define AT91C_PA5_MCI0_DA3 (AT91C_PIO_PA5) //  
#define AT91C_PA5_SPI0_NPCS0 (AT91C_PIO_PA5) //  
#define AT91C_PIO_PA6        (1 <<  6) // Pin Controlled by PA6
#define AT91C_PA6_MCI1_CK  (AT91C_PIO_PA6) //  
#define AT91C_PA6_PCK2     (AT91C_PIO_PA6) //  
#define AT91C_PIO_PA7        (1 <<  7) // Pin Controlled by PA7
#define AT91C_PA7_MCI1_CDA (AT91C_PIO_PA7) //  
#define AT91C_PIO_PA8        (1 <<  8) // Pin Controlled by PA8
#define AT91C_PA8_MCI1_DA0 (AT91C_PIO_PA8) //  
#define AT91C_PIO_PA9        (1 <<  9) // Pin Controlled by PA9
#define AT91C_PA9_MCI1_DA1 (AT91C_PIO_PA9) //  
#define AT91C_PIO_PB0        (1 <<  0) // Pin Controlled by PB0
#define AT91C_PB0_AC97FS   (AT91C_PIO_PB0) //  
#define AT91C_PB0_TF0      (AT91C_PIO_PB0) //  
#define AT91C_PIO_PB1        (1 <<  1) // Pin Controlled by PB1
#define AT91C_PB1_AC97CK   (AT91C_PIO_PB1) //  
#define AT91C_PB1_TK0      (AT91C_PIO_PB1) //  
#define AT91C_PIO_PB10       (1 << 10) // Pin Controlled by PB10
#define AT91C_PB10_RK1      (AT91C_PIO_PB10) //  
#define AT91C_PB10_PCK1     (AT91C_PIO_PB10) //  
#define AT91C_PIO_PB11       (1 << 11) // Pin Controlled by PB11
#define AT91C_PB11_RF1      (AT91C_PIO_PB11) //  
#define AT91C_PB11_SPI0_NPCS3B (AT91C_PIO_PB11) //  
#define AT91C_PIO_PB12       (1 << 12) // Pin Controlled by PB12
#define AT91C_PB12_SPI1_MISO (AT91C_PIO_PB12) //  
#define AT91C_PIO_PB13       (1 << 13) // Pin Controlled by PB13
#define AT91C_PB13_SPI1_MOSI (AT91C_PIO_PB13) //  
#define AT91C_PIO_PB14       (1 << 14) // Pin Controlled by PB14
#define AT91C_PB14_SPI1_SPCK (AT91C_PIO_PB14) //  
#define AT91C_PIO_PB15       (1 << 15) // Pin Controlled by PB15
#define AT91C_PB15_SPI1_NPCS0 (AT91C_PIO_PB15) //  
#define AT91C_PIO_PB16       (1 << 16) // Pin Controlled by PB16
#define AT91C_PB16_SPI1_NPCS1 (AT91C_PIO_PB16) //  
#define AT91C_PB16_PCK1     (AT91C_PIO_PB16) //  
#define AT91C_PIO_PB17       (1 << 17) // Pin Controlled by PB17
#define AT91C_PB17_SPI1_NPCS2B (AT91C_PIO_PB17) //  
#define AT91C_PB17_TIOA2    (AT91C_PIO_PB17) //  
#define AT91C_PIO_PB18       (1 << 18) // Pin Controlled by PB18
#define AT91C_PB18_SPI1_NPCS3B (AT91C_PIO_PB18) //  
#define AT91C_PB18_TIOB2    (AT91C_PIO_PB18) //  
#define AT91C_PIO_PB19       (1 << 19) // Pin Controlled by PB19
#define AT91C_PB19_LVRST    (AT91C_PIO_PB19) //  
#define AT91C_PIO_PB2        (1 <<  2) // Pin Controlled by PB2
#define AT91C_PB2_AC97TX   (AT91C_PIO_PB2) //  
#define AT91C_PB2_TD0      (AT91C_PIO_PB2) //  
#define AT91C_PIO_PB20       (1 << 20) // Pin Controlled by PB20
#define AT91C_PB20_CKSYNC   (AT91C_PIO_PB20) //  
#define AT91C_PIO_PB21       (1 << 21) // Pin Controlled by PB21
#define AT91C_PB21_PCTL0    (AT91C_PIO_PB21) //  
#define AT91C_PIO_PB22       (1 << 22) // Pin Controlled by PB22
#define AT91C_PB22_CKDAT    (AT91C_PIO_PB22) //  
#define AT91C_PIO_PB23       (1 << 23) // Pin Controlled by PB23
#define AT91C_PB23_GPSSYNC  (AT91C_PIO_PB23) //  
#define AT91C_PIO_PB24       (1 << 24) // Pin Controlled by PB24
#define AT91C_PB24_OTG_SE0_VM (AT91C_PIO_PB24) //  
#define AT91C_PB24_DMARQ3   (AT91C_PIO_PB24) //  
#define AT91C_PIO_PB25       (1 << 25) // Pin Controlled by PB25
#define AT91C_PB25_OTG_DAT_VP (AT91C_PIO_PB25) //  
#define AT91C_PIO_PB26       (1 << 26) // Pin Controlled by PB26
#define AT91C_PB26_OTGTP_OE (AT91C_PIO_PB26) //  
#define AT91C_PIO_PB27       (1 << 27) // Pin Controlled by PB27
#define AT91C_PB27_OTGRCV   (AT91C_PIO_PB27) //  
#define AT91C_PB27_PWM2     (AT91C_PIO_PB27) //  
#define AT91C_PIO_PB28       (1 << 28) // Pin Controlled by PB28
#define AT91C_PB28_OTGSUSPEND (AT91C_PIO_PB28) //  
#define AT91C_PB28_TCLK0    (AT91C_PIO_PB28) //  
#define AT91C_PIO_PB29       (1 << 29) // Pin Controlled by PB29
#define AT91C_PB29_OTGINT   (AT91C_PIO_PB29) //  
#define AT91C_PB29_PWM3     (AT91C_PIO_PB29) //  
#define AT91C_PIO_PB3        (1 <<  3) // Pin Controlled by PB3
#define AT91C_PB3_AC97RX   (AT91C_PIO_PB3) //  
#define AT91C_PB3_RD0      (AT91C_PIO_PB3) //  
#define AT91C_PIO_PB30       (1 << 30) // Pin Controlled by PB30
#define AT91C_PB30_OTGTWD   (AT91C_PIO_PB30) //  
#define AT91C_PIO_PB31       (1 << 31) // Pin Controlled by PB31
#define AT91C_PB31_OTGTWCK  (AT91C_PIO_PB31) //  
#define AT91C_PIO_PB4        (1 <<  4) // Pin Controlled by PB4
#define AT91C_PB4_TWD      (AT91C_PIO_PB4) //  
#define AT91C_PB4_RK0      (AT91C_PIO_PB4) //  
#define AT91C_PIO_PB5        (1 <<  5) // Pin Controlled by PB5
#define AT91C_PB5_TWCK     (AT91C_PIO_PB5) //  
#define AT91C_PB5_RF0      (AT91C_PIO_PB5) //  
#define AT91C_PIO_PB6        (1 <<  6) // Pin Controlled by PB6
#define AT91C_PB6_TF1      (AT91C_PIO_PB6) //  
#define AT91C_PB6_DMARQ1   (AT91C_PIO_PB6) //  
#define AT91C_PIO_PB7        (1 <<  7) // Pin Controlled by PB7
#define AT91C_PB7_TK1      (AT91C_PIO_PB7) //  
#define AT91C_PB7_PWM0     (AT91C_PIO_PB7) //  
#define AT91C_PIO_PB8        (1 <<  8) // Pin Controlled by PB8
#define AT91C_PB8_TD1      (AT91C_PIO_PB8) //  
#define AT91C_PB8_PWM1     (AT91C_PIO_PB8) //  
#define AT91C_PIO_PB9        (1 <<  9) // Pin Controlled by PB9
#define AT91C_PB9_RD1      (AT91C_PIO_PB9) //  
#define AT91C_PB9_LCDCC    (AT91C_PIO_PB9) //  
#define AT91C_PIO_PC0        (1 <<  0) // Pin Controlled by PC0
#define AT91C_PC0_LCDVSYNC (AT91C_PIO_PC0) //  
#define AT91C_PIO_PC1        (1 <<  1) // Pin Controlled by PC1
#define AT91C_PC1_LCDHSYNC (AT91C_PIO_PC1) //  
#define AT91C_PIO_PC10       (1 << 10) // Pin Controlled by PC10
#define AT91C_PC10_LCDD6    (AT91C_PIO_PC10) //  
#define AT91C_PC10_LCDD11B  (AT91C_PIO_PC10) //  
#define AT91C_PIO_PC11       (1 << 11) // Pin Controlled by PC11
#define AT91C_PC11_LCDD7    (AT91C_PIO_PC11) //  
#define AT91C_PC11_LCDD12B  (AT91C_PIO_PC11) //  
#define AT91C_PIO_PC12       (1 << 12) // Pin Controlled by PC12
#define AT91C_PC12_LCDD8    (AT91C_PIO_PC12) //  
#define AT91C_PC12_LCDD13B  (AT91C_PIO_PC12) //  
#define AT91C_PIO_PC13       (1 << 13) // Pin Controlled by PC13
#define AT91C_PC13_LCDD9    (AT91C_PIO_PC13) //  
#define AT91C_PC13_LCDD14B  (AT91C_PIO_PC13) //  
#define AT91C_PIO_PC14       (1 << 14) // Pin Controlled by PC14
#define AT91C_PC14_LCDD10   (AT91C_PIO_PC14) //  
#define AT91C_PC14_LCDD15B  (AT91C_PIO_PC14) //  
#define AT91C_PIO_PC15       (1 << 15) // Pin Controlled by PC15
#define AT91C_PC15_LCDD11   (AT91C_PIO_PC15) //  
#define AT91C_PC15_LCDD19B  (AT91C_PIO_PC15) //  
#define AT91C_PIO_PC16       (1 << 16) // Pin Controlled by PC16
#define AT91C_PC16_LCDD12   (AT91C_PIO_PC16) //  
#define AT91C_PC16_LCDD20B  (AT91C_PIO_PC16) //  
#define AT91C_PIO_PC17       (1 << 17) // Pin Controlled by PC17
#define AT91C_PC17_LCDD13   (AT91C_PIO_PC17) //  
#define AT91C_PC17_LCDD21B  (AT91C_PIO_PC17) //  
#define AT91C_PIO_PC18       (1 << 18) // Pin Controlled by PC18
#define AT91C_PC18_LCDD14   (AT91C_PIO_PC18) //  
#define AT91C_PC18_LCDD22B  (AT91C_PIO_PC18) //  
#define AT91C_PIO_PC19       (1 << 19) // Pin Controlled by PC19
#define AT91C_PC19_LCDD15   (AT91C_PIO_PC19) //  
#define AT91C_PC19_LCDD23B  (AT91C_PIO_PC19) //  
#define AT91C_PIO_PC2        (1 <<  2) // Pin Controlled by PC2
#define AT91C_PC2_LCDDOTCK (AT91C_PIO_PC2) //  
#define AT91C_PIO_PC20       (1 << 20) // Pin Controlled by PC20
#define AT91C_PC20_LCDD16   (AT91C_PIO_PC20) //  
#define AT91C_PC20_E_TX2    (AT91C_PIO_PC20) //  
#define AT91C_PIO_PC21       (1 << 21) // Pin Controlled by PC21
#define AT91C_PC21_LCDD17   (AT91C_PIO_PC21) //  
#define AT91C_PC21_E_TX3    (AT91C_PIO_PC21) //  
#define AT91C_PIO_PC22       (1 << 22) // Pin Controlled by PC22
#define AT91C_PC22_LCDD18   (AT91C_PIO_PC22) //  
#define AT91C_PC22_E_RX2    (AT91C_PIO_PC22) //  
#define AT91C_PIO_PC23       (1 << 23) // Pin Controlled by PC23
#define AT91C_PC23_LCDD19   (AT91C_PIO_PC23) //  
#define AT91C_PC23_E_RX3    (AT91C_PIO_PC23) //  
#define AT91C_PIO_PC24       (1 << 24) // Pin Controlled by PC24
#define AT91C_PC24_LCDD20   (AT91C_PIO_PC24) //  
#define AT91C_PC24_E_TXER   (AT91C_PIO_PC24) //  
#define AT91C_PIO_PC25       (1 << 25) // Pin Controlled by PC25
#define AT91C_PC25_LCDD21   (AT91C_PIO_PC25) //  
#define AT91C_PC25_E_RXDV   (AT91C_PIO_PC25) //  
#define AT91C_PIO_PC26       (1 << 26) // Pin Controlled by PC26
#define AT91C_PC26_LCDD22   (AT91C_PIO_PC26) //  
#define AT91C_PC26_E_COL    (AT91C_PIO_PC26) //  
#define AT91C_PIO_PC27       (1 << 27) // Pin Controlled by PC27
#define AT91C_PC27_LCDD23   (AT91C_PIO_PC27) //  
#define AT91C_PC27_E_RXCK   (AT91C_PIO_PC27) //  
#define AT91C_PIO_PC28       (1 << 28) // Pin Controlled by PC28
#define AT91C_PC28_PWM0     (AT91C_PIO_PC28) //  
#define AT91C_PC28_TCLK1    (AT91C_PIO_PC28) //  
#define AT91C_PIO_PC29       (1 << 29) // Pin Controlled by PC29
#define AT91C_PC29_PCK0     (AT91C_PIO_PC29) //  
#define AT91C_PC29_PWM2     (AT91C_PIO_PC29) //  
#define AT91C_PIO_PC3        (1 <<  3) // Pin Controlled by PC3
#define AT91C_PC3_LCDEN    (AT91C_PIO_PC3) //  
#define AT91C_PC3_PWM1     (AT91C_PIO_PC3) //  
#define AT91C_PIO_PC30       (1 << 30) // Pin Controlled by PC30
#define AT91C_PC30_DRXD     (AT91C_PIO_PC30) //  
#define AT91C_PIO_PC31       (1 << 31) // Pin Controlled by PC31
#define AT91C_PC31_DTXD     (AT91C_PIO_PC31) //  
#define AT91C_PIO_PC4        (1 <<  4) // Pin Controlled by PC4
#define AT91C_PC4_LCDD0    (AT91C_PIO_PC4) //  
#define AT91C_PC4_LCDD3B   (AT91C_PIO_PC4) //  
#define AT91C_PIO_PC5        (1 <<  5) // Pin Controlled by PC5
#define AT91C_PC5_LCDD1    (AT91C_PIO_PC5) //  
#define AT91C_PC5_LCDD4B   (AT91C_PIO_PC5) //  
#define AT91C_PIO_PC6        (1 <<  6) // Pin Controlled by PC6
#define AT91C_PC6_LCDD2    (AT91C_PIO_PC6) //  
#define AT91C_PC6_LCDD5B   (AT91C_PIO_PC6) //  
#define AT91C_PIO_PC7        (1 <<  7) // Pin Controlled by PC7
#define AT91C_PC7_LCDD3    (AT91C_PIO_PC7) //  
#define AT91C_PC7_LCDD6B   (AT91C_PIO_PC7) //  
#define AT91C_PIO_PC8        (1 <<  8) // Pin Controlled by PC8
#define AT91C_PC8_LCDD4    (AT91C_PIO_PC8) //  
#define AT91C_PC8_LCDD7B   (AT91C_PIO_PC8) //  
#define AT91C_PIO_PC9        (1 <<  9) // Pin Controlled by PC9
#define AT91C_PC9_LCDD5    (AT91C_PIO_PC9) //  
#define AT91C_PC9_LCDD10B  (AT91C_PIO_PC9) //  
#define AT91C_PIO_PD0        (1 <<  0) // Pin Controlled by PD0
#define AT91C_PD0_TXD1     (AT91C_PIO_PD0) //  
#define AT91C_PD0_SPI0_NPCS2D (AT91C_PIO_PD0) //  
#define AT91C_PIO_PD1        (1 <<  1) // Pin Controlled by PD1
#define AT91C_PD1_RXD1     (AT91C_PIO_PD1) //  
#define AT91C_PD1_SPI0_NPCS3D (AT91C_PIO_PD1) //  
#define AT91C_PIO_PD10       (1 << 10) // Pin Controlled by PD10
#define AT91C_PD10_UNCONNECTED_PD10_A (AT91C_PIO_PD10) //  
#define AT91C_PD10_SCK1     (AT91C_PIO_PD10) //  
#define AT91C_PIO_PD11       (1 << 11) // Pin Controlled by PD11
#define AT91C_PD11_EBI0_NCS2 (AT91C_PIO_PD11) //  
#define AT91C_PD11_TSYNC    (AT91C_PIO_PD11) //  
#define AT91C_PIO_PD12       (1 << 12) // Pin Controlled by PD12
#define AT91C_PD12_EBI0_A23 (AT91C_PIO_PD12) //  
#define AT91C_PD12_TCLK     (AT91C_PIO_PD12) //  
#define AT91C_PIO_PD13       (1 << 13) // Pin Controlled by PD13
#define AT91C_PD13_EBI0_A24 (AT91C_PIO_PD13) //  
#define AT91C_PD13_TPS0     (AT91C_PIO_PD13) //  
#define AT91C_PIO_PD14       (1 << 14) // Pin Controlled by PD14
#define AT91C_PD14_EBI0_A25_CFNRW (AT91C_PIO_PD14) //  
#define AT91C_PD14_TPS1     (AT91C_PIO_PD14) //  
#define AT91C_PIO_PD15       (1 << 15) // Pin Controlled by PD15
#define AT91C_PD15_EBI0_NCS3_NANDCS (AT91C_PIO_PD15) //  
#define AT91C_PD15_TPS2     (AT91C_PIO_PD15) //  
#define AT91C_PIO_PD16       (1 << 16) // Pin Controlled by PD16
#define AT91C_PD16_EBI0_D16 (AT91C_PIO_PD16) //  
#define AT91C_PD16_TPK0     (AT91C_PIO_PD16) //  
#define AT91C_PIO_PD17       (1 << 17) // Pin Controlled by PD17
#define AT91C_PD17_EBI0_D17 (AT91C_PIO_PD17) //  
#define AT91C_PD17_TPK1     (AT91C_PIO_PD17) //  
#define AT91C_PIO_PD18       (1 << 18) // Pin Controlled by PD18
#define AT91C_PD18_EBI0_D18 (AT91C_PIO_PD18) //  
#define AT91C_PD18_TPK2     (AT91C_PIO_PD18) //  
#define AT91C_PIO_PD19       (1 << 19) // Pin Controlled by PD19
#define AT91C_PD19_EBI0_D19 (AT91C_PIO_PD19) //  
#define AT91C_PD19_TPK3     (AT91C_PIO_PD19) //  
#define AT91C_PIO_PD2        (1 <<  2) // Pin Controlled by PD2
#define AT91C_PD2_TXD2     (AT91C_PIO_PD2) //  
#define AT91C_PD2_SPI1_NPCS2D (AT91C_PIO_PD2) //  
#define AT91C_PIO_PD20       (1 << 20) // Pin Controlled by PD20
#define AT91C_PD20_EBI0_D20 (AT91C_PIO_PD20) //  
#define AT91C_PD20_TPK4     (AT91C_PIO_PD20) //  
#define AT91C_PIO_PD21       (1 << 21) // Pin Controlled by PD21
#define AT91C_PD21_EBI0_D21 (AT91C_PIO_PD21) //  
#define AT91C_PD21_TPK5     (AT91C_PIO_PD21) //  
#define AT91C_PIO_PD22       (1 << 22) // Pin Controlled by PD22
#define AT91C_PD22_EBI0_D22 (AT91C_PIO_PD22) //  
#define AT91C_PD22_TPK6     (AT91C_PIO_PD22) //  
#define AT91C_PIO_PD23       (1 << 23) // Pin Controlled by PD23
#define AT91C_PD23_EBI0_D23 (AT91C_PIO_PD23) //  
#define AT91C_PD23_TPK7     (AT91C_PIO_PD23) //  
#define AT91C_PIO_PD24       (1 << 24) // Pin Controlled by PD24
#define AT91C_PD24_EBI0_D24 (AT91C_PIO_PD24) //  
#define AT91C_PD24_TPK8     (AT91C_PIO_PD24) //  
#define AT91C_PIO_PD25       (1 << 25) // Pin Controlled by PD25
#define AT91C_PD25_EBI0_D25 (AT91C_PIO_PD25) //  
#define AT91C_PD25_TPK9     (AT91C_PIO_PD25) //  
#define AT91C_PIO_PD26       (1 << 26) // Pin Controlled by PD26
#define AT91C_PD26_EBI0_D26 (AT91C_PIO_PD26) //  
#define AT91C_PD26_TPK10    (AT91C_PIO_PD26) //  
#define AT91C_PIO_PD27       (1 << 27) // Pin Controlled by PD27
#define AT91C_PD27_EBI0_D27 (AT91C_PIO_PD27) //  
#define AT91C_PD27_TPK11    (AT91C_PIO_PD27) //  
#define AT91C_PIO_PD28       (1 << 28) // Pin Controlled by PD28
#define AT91C_PD28_EBI0_D28 (AT91C_PIO_PD28) //  
#define AT91C_PD28_TPK12    (AT91C_PIO_PD28) //  
#define AT91C_PIO_PD29       (1 << 29) // Pin Controlled by PD29
#define AT91C_PD29_EBI0_D29 (AT91C_PIO_PD29) //  
#define AT91C_PD29_TPK13    (AT91C_PIO_PD29) //  
#define AT91C_PIO_PD3        (1 <<  3) // Pin Controlled by PD3
#define AT91C_PD3_RXD2     (AT91C_PIO_PD3) //  
#define AT91C_PD3_SPI1_NPCS3D (AT91C_PIO_PD3) //  
#define AT91C_PIO_PD30       (1 << 30) // Pin Controlled by PD30
#define AT91C_PD30_EBI0_D30 (AT91C_PIO_PD30) //  
#define AT91C_PD30_TPK14    (AT91C_PIO_PD30) //  
#define AT91C_PIO_PD31       (1 << 31) // Pin Controlled by PD31
#define AT91C_PD31_EBI0_D31 (AT91C_PIO_PD31) //  
#define AT91C_PD31_TPK15    (AT91C_PIO_PD31) //  
#define AT91C_PIO_PD4        (1 <<  4) // Pin Controlled by PD4
#define AT91C_PD4_FIQ      (AT91C_PIO_PD4) //  
#define AT91C_PD4_DMARQ2   (AT91C_PIO_PD4) //  
#define AT91C_PIO_PD5        (1 <<  5) // Pin Controlled by PD5
#define AT91C_PD5_EBI0_NWAIT (AT91C_PIO_PD5) //  
#define AT91C_PD5_RTS2     (AT91C_PIO_PD5) //  
#define AT91C_PIO_PD6        (1 <<  6) // Pin Controlled by PD6
#define AT91C_PD6_EBI0_NCS4_CFCS0 (AT91C_PIO_PD6) //  
#define AT91C_PD6_CTS2     (AT91C_PIO_PD6) //  
#define AT91C_PIO_PD7        (1 <<  7) // Pin Controlled by PD7
#define AT91C_PD7_EBI0_NCS5_CFCS1 (AT91C_PIO_PD7) //  
#define AT91C_PD7_RTS1     (AT91C_PIO_PD7) //  
#define AT91C_PIO_PD8        (1 <<  8) // Pin Controlled by PD8
#define AT91C_PD8_EBI0_CFCE1 (AT91C_PIO_PD8) //  
#define AT91C_PD8_CTS1     (AT91C_PIO_PD8) //  
#define AT91C_PIO_PD9        (1 <<  9) // Pin Controlled by PD9
#define AT91C_PD9_EBI0_CFCE2 (AT91C_PIO_PD9) //  
#define AT91C_PD9_SCK2     (AT91C_PIO_PD9) //  
#define AT91C_PIO_PE0        (1 <<  0) // Pin Controlled by PE0
#define AT91C_PE0_ISI_D0   (AT91C_PIO_PE0) //  
#define AT91C_PE0_DRFIN0   (AT91C_PIO_PE0) //  GPS Digital RF Input sigi_a0
#define AT91C_PIO_PE1        (1 <<  1) // Pin Controlled by PE1
#define AT91C_PE1_ISI_D1   (AT91C_PIO_PE1) //  
#define AT91C_PE1_DRFIN1   (AT91C_PIO_PE1) //  GPS Digital RF Input sigi_a1
#define AT91C_PIO_PE10       (1 << 10) // Pin Controlled by PE10
#define AT91C_PE10_ISI_VSYNC (AT91C_PIO_PE10) //  
#define AT91C_PE10_PWM3     (AT91C_PIO_PE10) //  
#define AT91C_PIO_PE11       (1 << 11) // Pin Controlled by PE11
#define AT91C_PE11_ISI_MCK  (AT91C_PIO_PE11) //  
#define AT91C_PE11_PCK3     (AT91C_PIO_PE11) //  
#define AT91C_PIO_PE12       (1 << 12) // Pin Controlled by PE12
#define AT91C_PE12_KBDR0    (AT91C_PIO_PE12) //  
#define AT91C_PE12_ISI_D8   (AT91C_PIO_PE12) //  
#define AT91C_PIO_PE13       (1 << 13) // Pin Controlled by PE13
#define AT91C_PE13_KBDR1    (AT91C_PIO_PE13) //  
#define AT91C_PE13_ISI_D9   (AT91C_PIO_PE13) //  
#define AT91C_PIO_PE14       (1 << 14) // Pin Controlled by PE14
#define AT91C_PE14_KBDR2    (AT91C_PIO_PE14) //  
#define AT91C_PE14_ISI_D10  (AT91C_PIO_PE14) //  
#define AT91C_PIO_PE15       (1 << 15) // Pin Controlled by PE15
#define AT91C_PE15_KBDR3    (AT91C_PIO_PE15) //  
#define AT91C_PE15_ISI_D11  (AT91C_PIO_PE15) //  
#define AT91C_PIO_PE16       (1 << 16) // Pin Controlled by PE16
#define AT91C_PE16_KBDR4    (AT91C_PIO_PE16) //  
#define AT91C_PIO_PE17       (1 << 17) // Pin Controlled by PE17
#define AT91C_PE17_KBDC0    (AT91C_PIO_PE17) //  
#define AT91C_PIO_PE18       (1 << 18) // Pin Controlled by PE18
#define AT91C_PE18_KBDC1    (AT91C_PIO_PE18) //  
#define AT91C_PE18_TIOA0    (AT91C_PIO_PE18) //  
#define AT91C_PIO_PE19       (1 << 19) // Pin Controlled by PE19
#define AT91C_PE19_KBDC2    (AT91C_PIO_PE19) //  
#define AT91C_PE19_TIOB0    (AT91C_PIO_PE19) //  
#define AT91C_PIO_PE2        (1 <<  2) // Pin Controlled by PE2
#define AT91C_PE2_ISI_D2   (AT91C_PIO_PE2) //  
#define AT91C_PE2_DRFIN2   (AT91C_PIO_PE2) //  GPS Digital RF Input sigq_a0
#define AT91C_PIO_PE20       (1 << 20) // Pin Controlled by PE20
#define AT91C_PE20_KBDC3    (AT91C_PIO_PE20) //  
#define AT91C_PE20_EBI1_NWAIT (AT91C_PIO_PE20) //  
#define AT91C_PIO_PE21       (1 << 21) // Pin Controlled by PE21
#define AT91C_PE21_E_TXCK   (AT91C_PIO_PE21) //  
#define AT91C_PE21_EBI1_NANDWE (AT91C_PIO_PE21) //  
#define AT91C_PIO_PE22       (1 << 22) // Pin Controlled by PE22
#define AT91C_PE22_E_CRS    (AT91C_PIO_PE22) //  
#define AT91C_PE22_EBI1_NCS2_NANDCS (AT91C_PIO_PE22) //  
#define AT91C_PIO_PE23       (1 << 23) // Pin Controlled by PE23
#define AT91C_PE23_E_TX0    (AT91C_PIO_PE23) //  
#define AT91C_PE23_EBI1_NANDOE (AT91C_PIO_PE23) //  
#define AT91C_PIO_PE24       (1 << 24) // Pin Controlled by PE24
#define AT91C_PE24_E_TX1    (AT91C_PIO_PE24) //  
#define AT91C_PE24_EBI1_NWR3_NBS3 (AT91C_PIO_PE24) //  
#define AT91C_PIO_PE25       (1 << 25) // Pin Controlled by PE25
#define AT91C_PE25_E_RX0    (AT91C_PIO_PE25) //  
#define AT91C_PE25_EBI1_NCS1_SDCS (AT91C_PIO_PE25) //  
#define AT91C_PIO_PE26       (1 << 26) // Pin Controlled by PE26
#define AT91C_PE26_E_RX1    (AT91C_PIO_PE26) //  
#define AT91C_PIO_PE27       (1 << 27) // Pin Controlled by PE27
#define AT91C_PE27_E_RXER   (AT91C_PIO_PE27) //  
#define AT91C_PE27_EBI1_SDCKE (AT91C_PIO_PE27) //  
#define AT91C_PIO_PE28       (1 << 28) // Pin Controlled by PE28
#define AT91C_PE28_E_TXEN   (AT91C_PIO_PE28) //  
#define AT91C_PE28_EBI1_RAS (AT91C_PIO_PE28) //  
#define AT91C_PIO_PE29       (1 << 29) // Pin Controlled by PE29
#define AT91C_PE29_E_MDC    (AT91C_PIO_PE29) //  
#define AT91C_PE29_EBI1_CAS (AT91C_PIO_PE29) //  
#define AT91C_PIO_PE3        (1 <<  3) // Pin Controlled by PE3
#define AT91C_PE3_ISI_D3   (AT91C_PIO_PE3) //  
#define AT91C_PE3_DRFIN3   (AT91C_PIO_PE3) //  GPS Digital RF Input sigq_a1
#define AT91C_PIO_PE30       (1 << 30) // Pin Controlled by PE30
#define AT91C_PE30_E_MDIO   (AT91C_PIO_PE30) //  
#define AT91C_PE30_EBI1_SDWE (AT91C_PIO_PE30) //  
#define AT91C_PIO_PE31       (1 << 31) // Pin Controlled by PE31
#define AT91C_PE31_E_F100   (AT91C_PIO_PE31) //  
#define AT91C_PE31_EBI1_SDA10 (AT91C_PIO_PE31) //  
#define AT91C_PIO_PE4        (1 <<  4) // Pin Controlled by PE4
#define AT91C_PE4_ISI_D4   (AT91C_PIO_PE4) //  
#define AT91C_PE4_DRFIN4   (AT91C_PIO_PE4) //  GPS Digital RF Input sigi_b0
#define AT91C_PIO_PE5        (1 <<  5) // Pin Controlled by PE5
#define AT91C_PE5_ISI_D5   (AT91C_PIO_PE5) //  
#define AT91C_PE5_DRFIN5   (AT91C_PIO_PE5) //  GPS Digital RF Input sigi_b1
#define AT91C_PIO_PE6        (1 <<  6) // Pin Controlled by PE6
#define AT91C_PE6_ISI_D6   (AT91C_PIO_PE6) //  
#define AT91C_PE6_DRFIN6   (AT91C_PIO_PE6) //  GPS Digital RF Input sigq_b0
#define AT91C_PIO_PE7        (1 <<  7) // Pin Controlled by PE7
#define AT91C_PE7_ISI_D7   (AT91C_PIO_PE7) //  
#define AT91C_PE7_DRFIN7   (AT91C_PIO_PE7) //  GPS Digital RF Input sigq_b1
#define AT91C_PIO_PE8        (1 <<  8) // Pin Controlled by PE8
#define AT91C_PE8_ISI_PCK  (AT91C_PIO_PE8) //  
#define AT91C_PE8_TIOA1    (AT91C_PIO_PE8) //  
#define AT91C_PIO_PE9        (1 <<  9) // Pin Controlled by PE9
#define AT91C_PE9_ISI_HSYNC (AT91C_PIO_PE9) //  
#define AT91C_PE9_TIOB1    (AT91C_PIO_PE9) //  

// *****************************************************************************
//               PERIPHERAL ID DEFINITIONS FOR AT91SAM9265
// *****************************************************************************
#define AT91C_ID_FIQ    ( 0) // Advanced Interrupt Controller (FIQ)
#define AT91C_ID_SYS    ( 1) // System Controller
#define AT91C_ID_PIOA   ( 2) // Parallel IO Controller A
#define AT91C_ID_PIOB   ( 3) // Parallel IO Controller B
#define AT91C_ID_PIOCDE ( 4) // Parallel IO Controller C, Parallel IO Controller D, Parallel IO Controller E
#define AT91C_ID_AES    ( 5) // Advanced Encryption Standard
#define AT91C_ID_US0    ( 7) // USART 0
#define AT91C_ID_US1    ( 8) // USART 1
#define AT91C_ID_US2    ( 9) // USART 2
#define AT91C_ID_MCI0   (10) // Multimedia Card Interface 0
#define AT91C_ID_MCI1   (11) // Multimedia Card Interface 1
#define AT91C_ID_CAN    (12) // CAN Controller
#define AT91C_ID_TWI    (13) // Two-Wire Interface
#define AT91C_ID_SPI0   (14) // Serial Peripheral Interface 0
#define AT91C_ID_SPI1   (15) // Serial Peripheral Interface 1
#define AT91C_ID_SSC0   (16) // Serial Synchronous Controller 0
#define AT91C_ID_SSC1   (17) // Serial Synchronous Controller 1
#define AT91C_ID_AC97C  (18) // AC97 Controller
#define AT91C_ID_TC012  (19) // Timer Counter 0, Timer Counter 1, Timer Counter 2
#define AT91C_ID_PWMC   (20) // PWM Controller
#define AT91C_ID_EMAC   (21) // Ethernet Mac
#define AT91C_ID_GPS    (22) // GPS engine
#define AT91C_ID_UDPHS  (29) // USB Device Port High Speed
#define AT91C_ID_IRQ0   (30) // Advanced Interrupt Controller (IRQ0)
#define AT91C_ID_IRQ1   (31) // Advanced Interrupt Controller (IRQ1)
#define AT91C_ALL_INT   (0xE07FFFBF) // ALL VALID INTERRUPTS

// *****************************************************************************
//               BASE ADDRESS DEFINITIONS FOR AT91SAM9265
// *****************************************************************************
#define AT91C_BASE_SYS       (AT91_CAST(AT91PS_SYS) 	0xFFFFE000) // (SYS) Base Address
#define AT91C_BASE_EBI0      (AT91_CAST(AT91PS_EBI0) 	0xFFFFE200) // (EBI0) Base Address
#define AT91C_BASE_SDRAMC0   (AT91_CAST(AT91PS_SDRAMC) 	0xFFFFE200) // (SDRAMC0) Base Address
#define AT91C_BASE_SMC0      (AT91_CAST(AT91PS_SMC) 	0xFFFFE400) // (SMC0) Base Address
#define AT91C_BASE_EBI1      (AT91_CAST(AT91PS_EBI1) 	0xFFFFE800) // (EBI1) Base Address
#define AT91C_BASE_SDRAMC1   (AT91_CAST(AT91PS_SDRAMC) 	0xFFFFE800) // (SDRAMC1) Base Address
#define AT91C_BASE_SMC1      (AT91_CAST(AT91PS_SMC) 	0xFFFFEA00) // (SMC1) Base Address
#define AT91C_BASE_MATRIX    (AT91_CAST(AT91PS_MATRIX) 	0xFFFFEC00) // (MATRIX) Base Address
#define AT91C_BASE_PDC_DBGU  (AT91_CAST(AT91PS_PDC) 	0xFFFFEF00) // (PDC_DBGU) Base Address
#define AT91C_BASE_DBGU      (AT91_CAST(AT91PS_DBGU) 	0xFFFFEE00) // (DBGU) Base Address
#define AT91C_BASE_AIC       (AT91_CAST(AT91PS_AIC) 	0xFFFFF000) // (AIC) Base Address
#define AT91C_BASE_PIOA      (AT91_CAST(AT91PS_PIO) 	0xFFFFF200) // (PIOA) Base Address
#define AT91C_BASE_PIOB      (AT91_CAST(AT91PS_PIO) 	0xFFFFF400) // (PIOB) Base Address
#define AT91C_BASE_PIOC      (AT91_CAST(AT91PS_PIO) 	0xFFFFF600) // (PIOC) Base Address
#define AT91C_BASE_PIOD      (AT91_CAST(AT91PS_PIO) 	0xFFFFF800) // (PIOD) Base Address
#define AT91C_BASE_PIOE      (AT91_CAST(AT91PS_PIO) 	0xFFFFFA00) // (PIOE) Base Address
#define AT91C_BASE_CKGR      (AT91_CAST(AT91PS_CKGR) 	0xFFFFFC20) // (CKGR) Base Address
#define AT91C_BASE_PMC       (AT91_CAST(AT91PS_PMC) 	0xFFFFFC00) // (PMC) Base Address
#define AT91C_BASE_RSTC      (AT91_CAST(AT91PS_RSTC) 	0xFFFFFD00) // (RSTC) Base Address
#define AT91C_BASE_SHDWC     (AT91_CAST(AT91PS_SHDWC) 	0xFFFFFD10) // (SHDWC) Base Address
#define AT91C_BASE_RTTC0     (AT91_CAST(AT91PS_RTTC) 	0xFFFFFD20) // (RTTC0) Base Address
#define AT91C_BASE_RTTC1     (AT91_CAST(AT91PS_RTTC) 	0xFFFFFD50) // (RTTC1) Base Address
#define AT91C_BASE_PITC      (AT91_CAST(AT91PS_PITC) 	0xFFFFFD30) // (PITC) Base Address
#define AT91C_BASE_WDTC      (AT91_CAST(AT91PS_WDTC) 	0xFFFFFD40) // (WDTC) Base Address
#define AT91C_BASE_TC0       (AT91_CAST(AT91PS_TC) 	0xFFF7C000) // (TC0) Base Address
#define AT91C_BASE_TC1       (AT91_CAST(AT91PS_TC) 	0xFFF7C040) // (TC1) Base Address
#define AT91C_BASE_TC2       (AT91_CAST(AT91PS_TC) 	0xFFF7C080) // (TC2) Base Address
#define AT91C_BASE_TCB0      (AT91_CAST(AT91PS_TCB) 	0xFFF7C000) // (TCB0) Base Address
#define AT91C_BASE_TCB1      (AT91_CAST(AT91PS_TCB) 	0xFFF7C040) // (TCB1) Base Address
#define AT91C_BASE_TCB2      (AT91_CAST(AT91PS_TCB) 	0xFFF7C080) // (TCB2) Base Address
#define AT91C_BASE_PDC_MCI0  (AT91_CAST(AT91PS_PDC) 	0xFFF80100) // (PDC_MCI0) Base Address
#define AT91C_BASE_MCI0      (AT91_CAST(AT91PS_MCI) 	0xFFF80000) // (MCI0) Base Address
#define AT91C_BASE_PDC_MCI1  (AT91_CAST(AT91PS_PDC) 	0xFFF84100) // (PDC_MCI1) Base Address
#define AT91C_BASE_MCI1      (AT91_CAST(AT91PS_MCI) 	0xFFF84000) // (MCI1) Base Address
#define AT91C_BASE_TWI       (AT91_CAST(AT91PS_TWI) 	0xFFF88000) // (TWI) Base Address
#define AT91C_BASE_PDC_US0   (AT91_CAST(AT91PS_PDC) 	0xFFF8C100) // (PDC_US0) Base Address
#define AT91C_BASE_US0       (AT91_CAST(AT91PS_USART) 	0xFFF8C000) // (US0) Base Address
#define AT91C_BASE_PDC_US1   (AT91_CAST(AT91PS_PDC) 	0xFFF90100) // (PDC_US1) Base Address
#define AT91C_BASE_US1       (AT91_CAST(AT91PS_USART) 	0xFFF90000) // (US1) Base Address
#define AT91C_BASE_PDC_US2   (AT91_CAST(AT91PS_PDC) 	0xFFF94100) // (PDC_US2) Base Address
#define AT91C_BASE_US2       (AT91_CAST(AT91PS_USART) 	0xFFF94000) // (US2) Base Address
#define AT91C_BASE_PDC_SSC0  (AT91_CAST(AT91PS_PDC) 	0xFFF98100) // (PDC_SSC0) Base Address
#define AT91C_BASE_SSC0      (AT91_CAST(AT91PS_SSC) 	0xFFF98000) // (SSC0) Base Address
#define AT91C_BASE_PDC_SSC1  (AT91_CAST(AT91PS_PDC) 	0xFFF9C100) // (PDC_SSC1) Base Address
#define AT91C_BASE_SSC1      (AT91_CAST(AT91PS_SSC) 	0xFFF9C000) // (SSC1) Base Address
#define AT91C_BASE_PDC_AC97C (AT91_CAST(AT91PS_PDC) 	0xFFFA0100) // (PDC_AC97C) Base Address
#define AT91C_BASE_AC97C     (AT91_CAST(AT91PS_AC97C) 	0xFFFA0000) // (AC97C) Base Address
#define AT91C_BASE_PDC_SPI0  (AT91_CAST(AT91PS_PDC) 	0xFFFA4100) // (PDC_SPI0) Base Address
#define AT91C_BASE_SPI0      (AT91_CAST(AT91PS_SPI) 	0xFFFA4000) // (SPI0) Base Address
#define AT91C_BASE_PDC_SPI1  (AT91_CAST(AT91PS_PDC) 	0xFFFA8100) // (PDC_SPI1) Base Address
#define AT91C_BASE_SPI1      (AT91_CAST(AT91PS_SPI) 	0xFFFA8000) // (SPI1) Base Address
#define AT91C_BASE_CAN_MB0   (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC200) // (CAN_MB0) Base Address
#define AT91C_BASE_CAN_MB1   (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC220) // (CAN_MB1) Base Address
#define AT91C_BASE_CAN_MB2   (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC240) // (CAN_MB2) Base Address
#define AT91C_BASE_CAN_MB3   (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC260) // (CAN_MB3) Base Address
#define AT91C_BASE_CAN_MB4   (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC280) // (CAN_MB4) Base Address
#define AT91C_BASE_CAN_MB5   (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC2A0) // (CAN_MB5) Base Address
#define AT91C_BASE_CAN_MB6   (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC2C0) // (CAN_MB6) Base Address
#define AT91C_BASE_CAN_MB7   (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC2E0) // (CAN_MB7) Base Address
#define AT91C_BASE_CAN_MB8   (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC300) // (CAN_MB8) Base Address
#define AT91C_BASE_CAN_MB9   (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC320) // (CAN_MB9) Base Address
#define AT91C_BASE_CAN_MB10  (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC340) // (CAN_MB10) Base Address
#define AT91C_BASE_CAN_MB11  (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC360) // (CAN_MB11) Base Address
#define AT91C_BASE_CAN_MB12  (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC380) // (CAN_MB12) Base Address
#define AT91C_BASE_CAN_MB13  (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC3A0) // (CAN_MB13) Base Address
#define AT91C_BASE_CAN_MB14  (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC3C0) // (CAN_MB14) Base Address
#define AT91C_BASE_CAN_MB15  (AT91_CAST(AT91PS_CAN_MB) 	0xFFFAC3E0) // (CAN_MB15) Base Address
#define AT91C_BASE_CAN       (AT91_CAST(AT91PS_CAN) 	0xFFFAC000) // (CAN) Base Address
#define AT91C_BASE_PWMC_CH0  (AT91_CAST(AT91PS_PWMC_CH) 	0xFFFB8200) // (PWMC_CH0) Base Address
#define AT91C_BASE_PWMC_CH1  (AT91_CAST(AT91PS_PWMC_CH) 	0xFFFB8220) // (PWMC_CH1) Base Address
#define AT91C_BASE_PWMC_CH2  (AT91_CAST(AT91PS_PWMC_CH) 	0xFFFB8240) // (PWMC_CH2) Base Address
#define AT91C_BASE_PWMC_CH3  (AT91_CAST(AT91PS_PWMC_CH) 	0xFFFB8260) // (PWMC_CH3) Base Address
#define AT91C_BASE_PWMC      (AT91_CAST(AT91PS_PWMC) 	0xFFFB8000) // (PWMC) Base Address
#define AT91C_BASE_MACB      (AT91_CAST(AT91PS_EMAC) 	0xFFFBC000) // (MACB) Base Address
#define AT91C_BASE_LCDC      (AT91_CAST(AT91PS_LCDC) 	0x00700000) // (LCDC) Base Address
#define AT91C_BASE_DMA       (AT91_CAST(AT91PS_DMA) 	0x00800000) // (DMA) Base Address
#define AT91C_BASE_OTG       (AT91_CAST(AT91PS_OTG) 	0x00900000) // (OTG) Base Address
#define AT91C_BASE_UDPHS_EPTFIFO (AT91_CAST(AT91PS_UDPHS_EPTFIFO) 	0x00B00000) // (UDPHS_EPTFIFO) Base Address
#define AT91C_BASE_UDPHS_EPT_0 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC100) // (UDPHS_EPT_0) Base Address
#define AT91C_BASE_UDPHS_EPT_1 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC120) // (UDPHS_EPT_1) Base Address
#define AT91C_BASE_UDPHS_EPT_2 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC140) // (UDPHS_EPT_2) Base Address
#define AT91C_BASE_UDPHS_EPT_3 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC160) // (UDPHS_EPT_3) Base Address
#define AT91C_BASE_UDPHS_EPT_4 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC180) // (UDPHS_EPT_4) Base Address
#define AT91C_BASE_UDPHS_EPT_5 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC1A0) // (UDPHS_EPT_5) Base Address
#define AT91C_BASE_UDPHS_EPT_6 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC1C0) // (UDPHS_EPT_6) Base Address
#define AT91C_BASE_UDPHS_EPT_7 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC1E0) // (UDPHS_EPT_7) Base Address
#define AT91C_BASE_UDPHS_EPT_8 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC200) // (UDPHS_EPT_8) Base Address
#define AT91C_BASE_UDPHS_EPT_9 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC220) // (UDPHS_EPT_9) Base Address
#define AT91C_BASE_UDPHS_EPT_10 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC240) // (UDPHS_EPT_10) Base Address
#define AT91C_BASE_UDPHS_EPT_11 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC260) // (UDPHS_EPT_11) Base Address
#define AT91C_BASE_UDPHS_EPT_12 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC280) // (UDPHS_EPT_12) Base Address
#define AT91C_BASE_UDPHS_EPT_13 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC2A0) // (UDPHS_EPT_13) Base Address
#define AT91C_BASE_UDPHS_EPT_14 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC2C0) // (UDPHS_EPT_14) Base Address
#define AT91C_BASE_UDPHS_EPT_15 (AT91_CAST(AT91PS_UDPHS_EPT) 	0xFFFCC2E0) // (UDPHS_EPT_15) Base Address
#define AT91C_BASE_UDPHS_DMA_1 (AT91_CAST(AT91PS_UDPHS_DMA) 	0xFFFCC310) // (UDPHS_DMA_1) Base Address
#define AT91C_BASE_UDPHS_DMA_2 (AT91_CAST(AT91PS_UDPHS_DMA) 	0xFFFCC320) // (UDPHS_DMA_2) Base Address
#define AT91C_BASE_UDPHS_DMA_3 (AT91_CAST(AT91PS_UDPHS_DMA) 	0xFFFCC330) // (UDPHS_DMA_3) Base Address
#define AT91C_BASE_UDPHS_DMA_4 (AT91_CAST(AT91PS_UDPHS_DMA) 	0xFFFCC340) // (UDPHS_DMA_4) Base Address
#define AT91C_BASE_UDPHS_DMA_5 (AT91_CAST(AT91PS_UDPHS_DMA) 	0xFFFCC350) // (UDPHS_DMA_5) Base Address
#define AT91C_BASE_UDPHS_DMA_6 (AT91_CAST(AT91PS_UDPHS_DMA) 	0xFFFCC360) // (UDPHS_DMA_6) Base Address
#define AT91C_BASE_UDPHS_DMA_7 (AT91_CAST(AT91PS_UDPHS_DMA) 	0xFFFCC370) // (UDPHS_DMA_7) Base Address
#define AT91C_BASE_UDPHS     (AT91_CAST(AT91PS_UDPHS) 	0xFFFCC000) // (UDPHS) Base Address
#define AT91C_BASE_UHP       (AT91_CAST(AT91PS_UHP) 	0x00A00000) // (UHP) Base Address
#define AT91C_BASE_GPS       (AT91_CAST(AT91PS_GPS) 	0xFFFC0000) // (GPS) Base Address
#define AT91C_BASE_TBOX      (AT91_CAST(AT91PS_TBOX) 	0x70000000) // (TBOX) Base Address
#define AT91C_BASE_AES       (AT91_CAST(AT91PS_AES) 	0xFFFB0000) // (AES) Base Address
#define AT91C_BASE_PDC_AES   (AT91_CAST(AT91PS_PDC) 	0xFFFB0100) // (PDC_AES) Base Address
#define AT91C_BASE_HECC0     (AT91_CAST(AT91PS_ECC) 	0xFFFFE000) // (HECC0) Base Address
#define AT91C_BASE_HECC1     (AT91_CAST(AT91PS_ECC) 	0xFFFFE600) // (HECC1) Base Address
#define AT91C_BASE_HISI      (AT91_CAST(AT91PS_ISI) 	0xFFFC4000) // (HISI) Base Address

// *****************************************************************************
//               MEMORY MAPPING DEFINITIONS FOR AT91SAM9265
// *****************************************************************************
// ITCM
#define AT91C_ITCM 	 (0x00100000) // Maximum ITCM Area base address
#define AT91C_ITCM_SIZE	 (0x00010000) // Maximum ITCM Area size in byte (64 Kbytes)
// DTCM
#define AT91C_DTCM 	 (0x00200000) // Maximum DTCM Area base address
#define AT91C_DTCM_SIZE	 (0x00010000) // Maximum DTCM Area size in byte (64 Kbytes)
// IRAM
#define AT91C_IRAM 	 (0x00300000) // Maximum Internal SRAM base address
#define AT91C_IRAM_SIZE	 (0x00010000) // Maximum Internal SRAM size in byte (64 Kbytes)
// IRAM_MIN
#define AT91C_IRAM_MIN	 (0x00300000) // Minimum Internal RAM base address
#define AT91C_IRAM_MIN_SIZE	 (0x00004000) // Minimum Internal RAM size in byte (16 Kbytes)
// IROM
#define AT91C_IROM 	 (0x00400000) // Internal ROM base address
#define AT91C_IROM_SIZE	 (0x00020000) // Internal ROM size in byte (128 Kbytes)
// GPS_TCM
#define AT91C_GPS_TCM	 (0x00500000) // RAM connected to GPS base address
#define AT91C_GPS_TCM_SIZE	 (0x00004000) // RAM connected to GPS size in byte (16 Kbytes)
// EBI0_CS0
#define AT91C_EBI0_CS0	 (0x10000000) // EBI0 Chip Select 0 base address
#define AT91C_EBI0_CS0_SIZE	 (0x10000000) // EBI0 Chip Select 0 size in byte (262144 Kbytes)
// EBI0_CS1
#define AT91C_EBI0_CS1	 (0x20000000) // EBI0 Chip Select 1 base address
#define AT91C_EBI0_CS1_SIZE	 (0x10000000) // EBI0 Chip Select 1 size in byte (262144 Kbytes)
// EBI0_SDRAM
#define AT91C_EBI0_SDRAM	 (0x20000000) // SDRAM on EBI0 Chip Select 1 base address
#define AT91C_EBI0_SDRAM_SIZE	 (0x10000000) // SDRAM on EBI0 Chip Select 1 size in byte (262144 Kbytes)
// EBI0_SDRAM_16BIT
#define AT91C_EBI0_SDRAM_16BIT	 (0x20000000) // SDRAM on EBI0 Chip Select 1 base address
#define AT91C_EBI0_SDRAM_16BIT_SIZE	 (0x02000000) // SDRAM on EBI0 Chip Select 1 size in byte (32768 Kbytes)
// EBI0_SDRAM_32BIT
#define AT91C_EBI0_SDRAM_32BIT	 (0x20000000) // SDRAM on EBI0 Chip Select 1 base address
#define AT91C_EBI0_SDRAM_32BIT_SIZE	 (0x04000000) // SDRAM on EBI0 Chip Select 1 size in byte (65536 Kbytes)
// EBI0_CS2
#define AT91C_EBI0_CS2	 (0x30000000) // EBI0 Chip Select 2 base address
#define AT91C_EBI0_CS2_SIZE	 (0x10000000) // EBI0 Chip Select 2 size in byte (262144 Kbytes)
// EBI0_CS3
#define AT91C_EBI0_CS3	 (0x40000000) // EBI0 Chip Select 3 base address
#define AT91C_EBI0_CS3_SIZE	 (0x10000000) // EBI0 Chip Select 3 size in byte (262144 Kbytes)
// EBI0_SM
#define AT91C_EBI0_SM	 (0x40000000) // SmartMedia on EBI0 Chip Select 3 base address
#define AT91C_EBI0_SM_SIZE	 (0x10000000) // SmartMedia on EBI0 Chip Select 3 size in byte (262144 Kbytes)
// EBI0_CS4
#define AT91C_EBI0_CS4	 (0x50000000) // EBI0 Chip Select 4 base address
#define AT91C_EBI0_CS4_SIZE	 (0x10000000) // EBI0 Chip Select 4 size in byte (262144 Kbytes)
// EBI0_CF0
#define AT91C_EBI0_CF0	 (0x50000000) // CompactFlash 0 on EBI0 Chip Select 4 base address
#define AT91C_EBI0_CF0_SIZE	 (0x10000000) // CompactFlash 0 on EBI0 Chip Select 4 size in byte (262144 Kbytes)
// EBI0_CS5
#define AT91C_EBI0_CS5	 (0x60000000) // EBI0 Chip Select 5 base address
#define AT91C_EBI0_CS5_SIZE	 (0x10000000) // EBI0 Chip Select 5 size in byte (262144 Kbytes)
// EBI0_CF1
#define AT91C_EBI0_CF1	 (0x60000000) // CompactFlash 1 on EBI0Chip Select 5 base address
#define AT91C_EBI0_CF1_SIZE	 (0x10000000) // CompactFlash 1 on EBI0Chip Select 5 size in byte (262144 Kbytes)
// EBI1_CS0
#define AT91C_EBI1_CS0	 (0x70000000) // EBI1 Chip Select 0 base address
#define AT91C_EBI1_CS0_SIZE	 (0x10000000) // EBI1 Chip Select 0 size in byte (262144 Kbytes)
// EBI1_CS1
#define AT91C_EBI1_CS1	 (0x80000000) // EBI1 Chip Select 1 base address
#define AT91C_EBI1_CS1_SIZE	 (0x10000000) // EBI1 Chip Select 1 size in byte (262144 Kbytes)
// EBI1_SDRAM_16BIT
#define AT91C_EBI1_SDRAM_16BIT	 (0x80000000) // SDRAM on EBI1 Chip Select 1 base address
#define AT91C_EBI1_SDRAM_16BIT_SIZE	 (0x02000000) // SDRAM on EBI1 Chip Select 1 size in byte (32768 Kbytes)
// EBI1_SDRAM_32BIT
#define AT91C_EBI1_SDRAM_32BIT	 (0x80000000) // SDRAM on EBI1 Chip Select 1 base address
#define AT91C_EBI1_SDRAM_32BIT_SIZE	 (0x04000000) // SDRAM on EBI1 Chip Select 1 size in byte (65536 Kbytes)
// EBI1_CS2
#define AT91C_EBI1_CS2	 (0x90000000) // EBI1 Chip Select 2 base address
#define AT91C_EBI1_CS2_SIZE	 (0x10000000) // EBI1 Chip Select 2 size in byte (262144 Kbytes)
// EBI1_SM
#define AT91C_EBI1_SM	 (0x90000000) // SmartMedia on EBI1 Chip Select 2 base address
#define AT91C_EBI1_SM_SIZE	 (0x10000000) // SmartMedia on EBI1 Chip Select 2 size in byte (262144 Kbytes)

#endif