path: root/at91lib/boards/sam7-p/board.h

/* ----------------------------------------------------------------------------
 *         ATMEL Microcontroller Software Support 
 * ----------------------------------------------------------------------------
 * Copyright (c) 2008, Atmel Corporation
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */

//------------------------------------------------------------------------------
/// \unit
/// !Purpose
/// 
/// Definition of AT91SAM7S-EK characteristics, AT91SAM7S-dependant PIOs and
/// external components interfacing.
/// 
/// !Contents
/// This file provide a large number of definitions, which are of three
/// different types.
///
/// PIO definitions are prefixed with #PIN_# or #PINS_#. They are to be used
/// with the pio peripheral to configure the pins required by the application.
///
/// First, additional information about the platform is provided by several
/// constants:
///    - BOARD_NAME is a string containing the board name
///    - The chip family and board (at91sam7s and at91sam7sek) are also
///      provided.
///    - BOARD_MAINOSC and BOARD_MCK contains the standard frequency for the
///      main oscillator and the master clock.
///
/// Contants prefixed with #BOARD_USB_# give information about the USB device
/// peripheral that is provided in the chip.
///
/// Defines prefixed with #PIN_# contain only one pin (and thus can be safely
/// used to initialize a single Pin instance), whereas defines starting with
/// #PINS_# contains either a single Pin instance with multiple pins inside it,
/// or a list of several Pin instances; they must be used as Pin[] array
/// initializer values, otherwise they are not safe.
///
/// Finally, some information about the flash controller is given by definitions
/// prefixed with #BOARD_FLASH_#.
//------------------------------------------------------------------------------

#ifndef BOARD_H 
#define BOARD_H

//------------------------------------------------------------------------------
//         Headers
//------------------------------------------------------------------------------

#if defined(at91sam7s32)
    #include "at91sam7s32/AT91SAM7S32.h"
#elif defined(at91sam7s321)
    #include "at91sam7s321/AT91SAM7S321.h"
#elif defined(at91sam7s64)
    #include "at91sam7s64/AT91SAM7S64.h"
#elif defined(at91sam7s128)
    #include "at91sam7s128/AT91SAM7S128.h"
#elif defined(at91sam7s256)
    #include "at91sam7s256/AT91SAM7S256.h"
#elif defined(at91sam7s512)
    #include "at91sam7s512/AT91SAM7S512.h"
#else
    #error Board does not support the specified chip.
#endif

//------------------------------------------------------------------------------
//         Global Definitions
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
// Board
//------------------------------------------------------------------------------
/// String containing the name of the board.
#define BOARD_NAME      "Olimex SAM7S-Pxxx"
/// Board definition.
#define at91sam7sek
/// Family definition.
#define at91sam7s
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
// Clocks
//------------------------------------------------------------------------------
/// Frequency of the board main oscillator, in Hz.
#define BOARD_MAINOSC           18432000

/// Master clock frequency (when using board_lowlevel.c), in Hz.
#define BOARD_MCK               48000000
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
// ADC
//------------------------------------------------------------------------------
/// ADC clock frequency, at 10-bit resolution (in Hz)
#define ADC_MAX_CK_10BIT         5000000
/// ADC clock frequency, at 8-bit resolution (in Hz)
#define ADC_MAX_CK_8BIT          8000000
/// Startup time max, return from Idle mode (in µs)
#define ADC_STARTUP_TIME_MAX       20
/// Track and hold Acquisition Time min (in ns)
#define ADC_TRACK_HOLD_TIME_MIN   600

//------------------------------------------------------------------------------
// USB
//------------------------------------------------------------------------------
/// Indicates the chip has a UDP controller.
#define BOARD_USB_UDP

/// Indicates the D+ pull-up is externally controlled.
#define BOARD_USB_PULLUP_EXTERNAL

/// Number of endpoints in the USB controller.
#define BOARD_USB_NUMENDPOINTS                  4

/// Returns the maximum packet size of the given endpoint.
/// \param i  Endpoint number.
/// \return Maximum packet size in bytes of endpoint. 
#define BOARD_USB_ENDPOINTS_MAXPACKETSIZE(i)    ((i == 0) ? 8 : 64)

/// Returns the number of FIFO banks for the given endpoint.
/// \param i  Endpoint number.
/// \return Number of FIFO banks for the endpoint.
#define BOARD_USB_ENDPOINTS_BANKS(i)            (((i == 0) || (i == 3)) ? 1 : 2)

/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
//#define BOARD_USB_BMATTRIBUTES                  USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
#define BOARD_USB_BMATTRIBUTES                  USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
//#define BOARD_USB_BMATTRIBUTES                  USBConfigurationDescriptor_SELFPOWERED_RWAKEUP
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
// Pins
//------------------------------------------------------------------------------
/// DBGU pins definition. Contains DRXD (PA9) and DTXD (PA10).
#define PINS_DBGU  {0x00000600, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}

/// LED #0 pin definition (PA18).
#define PIN_LED_DS1   {1 << 18, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
/// LED #1 pin definition (PA17).
#define PIN_LED_DS2   {1 << 17, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
/// List of the four LED pin definitions (PA0, PA1, PA2 & PA3)
#define PINS_LEDS   PIN_LED_DS1, PIN_LED_DS2

/// Push button #0 definition (PA19).
#define PIN_PUSHBUTTON_1    {1 << 19, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_PULLUP}
/// Push button #1 definition (PA20).
#define PIN_PUSHBUTTON_2    {1 << 20, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_PULLUP}
/// List of all push button definitions (PA19, PA20).
#define PINS_PUSHBUTTONS    PIN_PUSHBUTTON_1, PIN_PUSHBUTTON_2
/// Push button #1 index.
#define PUSHBUTTON_BP1      0
/// Push button #2 index.
#define PUSHBUTTON_BP2      1

/// USART0 TXD pin definition (PA5).
#define PIN_USART0_RXD  {1 << 5, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// USART0 RXD pin definition (PA6).
#define PIN_USART0_TXD  {1 << 6, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// USART0 RTS pin definition.
#define PIN_USART0_RTS  {1 << 7, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// USART0 CTS pin definition.
#define PIN_USART0_CTS  {1 << 8, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// USART0 SCK pin definition.
#define PIN_USART0_SCK  {1 << 2, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}

/// USART1 RXD pin definition (PA21).
#define PIN_USART1_RXD  {1 << 21, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// USART1 TXD pin definition (PA22).
#define PIN_USART1_TXD  {1 << 22, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}

/// SPI MISO pin definition (PA12).
#define PIN_SPI_MISO   {1 << 12, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_PULLUP}
/// SPI MOSI pin definition (PA13).
#define PIN_SPI_MOSI   {1 << 13, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// SPI SPCK pin definition (PA14).
#define PIN_SPI_SPCK   {1 << 14, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// SPI pins definition. Contains MISO, MOSI & SPCK (PA12, PA13 & PA14).
#define PINS_SPI       PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SPCK
/// SPI chip select 0 pin definition (PA11).
#define PIN_SPI_NPCS0  {1 << 11, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}

/// PWMC PWM0 pin definition (PA0).
#define PIN_PWMC_PWM0  {1 << 0, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// PWMC PWM0 pin definition (PA1).
#define PIN_PWMC_PWM1  {1 << 1, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/// PWMC PWM0 pin definition (PA2).
#define PIN_PWMC_PWM2  {1 << 2, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}

/// PWM pin definition for LED0
#define PIN_PWM_LED0 PIN_PWMC_PWM1
/// PWM pin definition for LED1
#define PIN_PWM_LED1 PIN_PWMC_PWM2
/// PWM channel for LED0
#define CHANNEL_PWM_LED0 1
/// PWM channel for LED1
#define CHANNEL_PWM_LED1 2

/// TWI pins definition. Contains TWD (PA3) and TWCK (PA4).
#define PINS_TWI  {0x00000018, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}

/// USB VBus monitoring pin definition (PA13).
#define PIN_USB_VBUS    {1 << 13, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_INPUT, PIO_DEFAULT}
/// USB pull-up control pin definition (PA16).
#define PIN_USB_PULLUP  {1 << 16, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
//------------------------------------------------------------------------------

/// !SD Card SPI
/// - BOARD_SD_SPI_BASE
/// - BOARD_SD_SPI_ID  
/// - BOARD_SD_SPI_PINS
/// - BOARD_SD_NPCS    

/// Not define in our board, but customer can add this feature
/// Base address of the SPI peripheral connected to the SD card.
#define BOARD_SD_SPI_BASE   AT91C_BASE_SPI
/// Identifier of the SPI peripheral connected to the SD card.
#define BOARD_SD_SPI_ID     AT91C_ID_SPI
/// List of pins to configure to access the SD card
#define BOARD_SD_SPI_PINS   PINS_SPI, PIN_SPI_NPCS0
/// NPCS number
#define BOARD_SD_NPCS       1

//------------------------------------------------------------------------------
// Flash
//------------------------------------------------------------------------------
/// Indicates chip has an EFC.
#define BOARD_FLASH_EFC
/// Address of the IAP function in ROM.
#define BOARD_FLASH_IAP_ADDRESS         0x300E08
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
/// \page "SAM7S-EK - External components"
/// This page lists the definitions related to external on-board components
/// located in the board.h file for the SAM7S-EK.
/// 
//
#endif //#ifndef BOARD_H