summaryrefslogtreecommitdiff
path: root/2005/flow-accounting-ols2005/OLS2005/siddha
diff options
context:
space:
mode:
Diffstat (limited to '2005/flow-accounting-ols2005/OLS2005/siddha')
-rw-r--r--2005/flow-accounting-ols2005/OLS2005/siddha/Makefile.inc7
-rw-r--r--2005/flow-accounting-ols2005/OLS2005/siddha/siddha-abstract.tex43
-rw-r--r--2005/flow-accounting-ols2005/OLS2005/siddha/siddha.tex100
3 files changed, 150 insertions, 0 deletions
diff --git a/2005/flow-accounting-ols2005/OLS2005/siddha/Makefile.inc b/2005/flow-accounting-ols2005/OLS2005/siddha/Makefile.inc
new file mode 100644
index 0000000..e083549
--- /dev/null
+++ b/2005/flow-accounting-ols2005/OLS2005/siddha/Makefile.inc
@@ -0,0 +1,7 @@
+PAPERS += siddha/siddha.dvi
+
+## Add any additional .tex or .eps files below:
+siddha/siddha.dvi siddha/siddha-proc.dvi: \
+ siddha/siddha.tex \
+ siddha/siddha-abstract.tex
+
diff --git a/2005/flow-accounting-ols2005/OLS2005/siddha/siddha-abstract.tex b/2005/flow-accounting-ols2005/OLS2005/siddha/siddha-abstract.tex
new file mode 100644
index 0000000..f8f1bbe
--- /dev/null
+++ b/2005/flow-accounting-ols2005/OLS2005/siddha/siddha-abstract.tex
@@ -0,0 +1,43 @@
+
+% Registration Chip Multi Processing(CMP) aware Linux Kernel Scheduler
+% [2]Register/Submit Suresh Siddha (suresh.b.siddha@intel.com)
+
+Recent advances in semiconductor manufacturing and
+engineering technologies have led to the inclusion of
+more than one CPU core in a single physical package.
+This, popularly know as Chip Multi Processing (CMP),
+allows multiple instruction streams to execute at the
+same time. CMP is in addition to today's Simultaneous
+Multi Threading (SMT) capabilities, like Intel{\textregistered}
+Hyper-Threading technology which allows a processor to
+present itself as two logical processors, resulting in
+best use of execution resources. With CMP, today's
+Linux Kernel will deliver instantaneous performance
+improvement. Linux Kernel scheduler could be further
+optimized by making it CMP-aware.
+
+In this paper, we will start with an overview of
+different CMP implementation's and then look into
+performance, power related optimization opportunities.
+We will describe the trade-offs between peak
+performance and power saving requirements. We will
+discuss how scheduler enhancements like
+
+\begin{itemize}
+\item adding a new scheduler domain for CMP
+
+\item setting up domain properties based on CMP
+characteristics
+
+\item active load balancing in the context of CMP and SMT
+\end{itemize}
+
+will improve the peak performance. Secondly, we will
+look at scheduler enhancements focusing power savings.
+We will then present scheduling policies that an
+administrator can select based on the performance and
+power requirements. We will close the paper with a
+brief look at CMP trends in future generation Intel(R)
+processors.
+
+
diff --git a/2005/flow-accounting-ols2005/OLS2005/siddha/siddha.tex b/2005/flow-accounting-ols2005/OLS2005/siddha/siddha.tex
new file mode 100644
index 0000000..42cd3e5
--- /dev/null
+++ b/2005/flow-accounting-ols2005/OLS2005/siddha/siddha.tex
@@ -0,0 +1,100 @@
+% The file must begin with this \documentclass declaration. You can
+% give one of three different options which control how picky LaTeX
+% is when typesetting:
+%
+% galley - All ``this doesn't fit'' warnings are suppressed, and
+% references are disabled (the key will be printed as a
+% reminder). Use this mode while writing.
+%
+% proof - All ``this doesn't fit'' warnings are active, as are
+% references. Overfull hboxes make ugly black blobs in
+% the margin. Use this mode to tidy up formatting after
+% you're done writing. (Same as article's ``draft'' mode.)
+%
+% final - As proof, but the ugly black blobs are turned off. Use
+% this to render PDFs or PostScript to give to other people,
+% when you're completely done. (As with article, this is the
+% default.)
+%
+% You can also use the leqno, fleqn, or openbib options to article.cls
+% if you wish. None of article's other options will work.
+
+%%%
+%%% PLEASE CHANGE 'galley' to 'final' BEFORE SUBMITTING. THANKS!
+%%% (to submit: "make clean" in the toplevel directory; tar and gzip *only* your directory;
+%%% email the gzipped tarball to papers@linuxsymposium.org.)
+%%%
+\documentclass[galley]{ols}
+
+% These two packages allow easy handling of urls and identifiers per the example paper.
+\usepackage{url}
+\usepackage{zrl}
+
+% The following package is not required, but is a handy way to put PDF and EPS graphics
+% into your paper using the \includegraphics command.
+\ifpdf
+\usepackage[pdftex]{graphicx}
+\else
+\usepackage{graphicx}
+\fi
+
+
+% Here in the preamble, you may load additional packages, or
+% define whatever macros you like, with the following exceptions:
+%
+% - Do not mess with the page layout, either by hand or with packages
+% (e.g., typearea, geometry).
+% - Do not change the principal fonts, either by hand or with packages.
+% - Do not use \pagestyle, or load any page header-related packages.
+% - Do not redefine any commands having to do with article titles.
+% - If you are using something that is not part of the standard
+% tetex-2 distribution, please make a note of whether it's on CTAN,
+% or include a copy with your submission.
+%
+
+\begin{document}
+
+% Mandatory: article title specification.
+% Do not put line breaks or other clever formatting in \title or
+% \shortauthor; these are moving arguments.
+
+\title{Chip Multi Processing (CMP) aware Linux Kernel Scheduler}
+\subtitle{ } % Subtitle is optional.
+\date{} % You can put a fixed date in if you wish,
+ % allow LaTeX to use the date of typesetting,
+ % or use \date{} to have no date at all.
+ % Whatever you do, there will not be a date
+ % shown in the proceedings.
+
+\shortauthor{Suresh Siddha} % Just you and your coauthors' names.
+% for example, \shortauthor{A.N.\ Author and A.\ Nother}
+% or perchance \shortauthor{Smith, Jones, Black, White, Gray, \& Greene}
+
+\author{% Authors, affiliations, and email addresses go here, like this:
+Suresh Siddha \\
+{\itshape Your affiliation}\\
+{\ttfamily\normalsize your-address@example.com}\\
+% \and
+% Bob \\
+% {\itshape Bob's affiliation.}\\
+% {\ttfamily\normalsize bob@example.com}\\
+} % end author section
+
+\maketitle
+
+\begin{abstract}
+% Article abstract goes here.
+\input{siddha-abstract.tex}
+\end{abstract}
+
+% Body of your article goes here. You are mostly unrestricted in what
+% LaTeX features you can use; however, the following will not work:
+% \thispagestyle
+% \marginpar
+% table of contents
+% list of figures / tables
+% glossaries
+% indices
+
+\end{document}
+
personal git repositories of Harald Welte. Your mileage may vary