summaryrefslogtreecommitdiff
path: root/src/ccid
diff options
context:
space:
mode:
Diffstat (limited to 'src/ccid')
-rw-r--r--src/ccid/ccid-driver.c2448
-rw-r--r--src/ccid/ccid-driver.h108
2 files changed, 2556 insertions, 0 deletions
diff --git a/src/ccid/ccid-driver.c b/src/ccid/ccid-driver.c
new file mode 100644
index 0000000..edca5ca
--- /dev/null
+++ b/src/ccid/ccid-driver.c
@@ -0,0 +1,2448 @@
+/* ccid-driver.c - USB ChipCardInterfaceDevices driver
+ * Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+ * Written by Werner Koch.
+ *
+ * This file is part of GnuPG.
+ *
+ * GnuPG is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * GnuPG is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ *
+ * ALTERNATIVELY, this file may be distributed under the terms of the
+ * following license, in which case the provisions of this license are
+ * required INSTEAD OF the GNU General Public License. If you wish to
+ * allow use of your version of this file only under the terms of the
+ * GNU General Public License, and not to allow others to use your
+ * version of this file under the terms of the following license,
+ * indicate your decision by deleting this paragraph and the license
+ * below.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, and the entire permission notice in its entirety,
+ * including the disclaimer of warranties.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote
+ * products derived from this software without specific prior
+ * written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $Date: 2005-09-09 13:18:08 +0200 (Fri, 09 Sep 2005) $
+ */
+
+
+/* CCID (ChipCardInterfaceDevices) is a specification for accessing
+ smartcard via a reader connected to the USB.
+
+ This is a limited driver allowing to use some CCID drivers directly
+ without any other specila drivers. This is a fallback driver to be
+ used when nothing else works or the system should be kept minimal
+ for security reasons. It makes use of the libusb library to gain
+ portable access to USB.
+
+ This driver has been tested with the SCM SCR335 and SPR532
+ smartcard readers and requires that a reader implements the TPDU
+ level exchange and does fully automatic initialization.
+*/
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#if defined(HAVE_LIBUSB) || defined(TEST)
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+
+#include <usb.h>
+
+#include "ccid-driver.h"
+
+#define DRVNAME "ccid-driver: "
+
+
+/* Depending on how this source is used we either define our error
+ output to go to stderr or to the jnlib based logging functions. We
+ use the latter when GNUPG_MAJOR_VERSION is defines or when both,
+ GNUPG_SCD_MAIN_HEADER and HAVE_JNLIB_LOGGING are defined.
+*/
+#if defined(GNUPG_MAJOR_VERSION) \
+ || (defined(GNUPG_SCD_MAIN_HEADER) && defined(HAVE_JNLIB_LOGGING))
+
+#if defined(GNUPG_SCD_MAIN_HEADER)
+# include GNUPG_SCD_MAIN_HEADER
+#elif GNUPG_MAJOR_VERSION == 1 /* GnuPG Version is < 1.9. */
+# include "options.h"
+# include "util.h"
+# include "memory.h"
+# include "cardglue.h"
+# else /* This is the modularized GnuPG 1.9 or later. */
+# include "scdaemon.h"
+#endif
+
+
+# define DEBUGOUT(t) do { if (debug_level) \
+ log_debug (DRVNAME t); } while (0)
+# define DEBUGOUT_1(t,a) do { if (debug_level) \
+ log_debug (DRVNAME t,(a)); } while (0)
+# define DEBUGOUT_2(t,a,b) do { if (debug_level) \
+ log_debug (DRVNAME t,(a),(b)); } while (0)
+# define DEBUGOUT_3(t,a,b,c) do { if (debug_level) \
+ log_debug (DRVNAME t,(a),(b),(c));} while (0)
+# define DEBUGOUT_4(t,a,b,c,d) do { if (debug_level) \
+ log_debug (DRVNAME t,(a),(b),(c),(d));} while (0)
+# define DEBUGOUT_CONT(t) do { if (debug_level) \
+ log_printf (t); } while (0)
+# define DEBUGOUT_CONT_1(t,a) do { if (debug_level) \
+ log_printf (t,(a)); } while (0)
+# define DEBUGOUT_CONT_2(t,a,b) do { if (debug_level) \
+ log_printf (t,(a),(b)); } while (0)
+# define DEBUGOUT_CONT_3(t,a,b,c) do { if (debug_level) \
+ log_printf (t,(a),(b),(c)); } while (0)
+# define DEBUGOUT_LF() do { if (debug_level) \
+ log_printf ("\n"); } while (0)
+
+#else /* Other usage of this source - don't use gnupg specifics. */
+
+# define DEBUGOUT(t) do { if (debug_level) \
+ fprintf (stderr, DRVNAME t); } while (0)
+# define DEBUGOUT_1(t,a) do { if (debug_level) \
+ fprintf (stderr, DRVNAME t, (a)); } while (0)
+# define DEBUGOUT_2(t,a,b) do { if (debug_level) \
+ fprintf (stderr, DRVNAME t, (a), (b)); } while (0)
+# define DEBUGOUT_3(t,a,b,c) do { if (debug_level) \
+ fprintf (stderr, DRVNAME t, (a), (b), (c)); } while (0)
+# define DEBUGOUT_4(t,a,b,c,d) do { if (debug_level) \
+ fprintf (stderr, DRVNAME t, (a), (b), (c), (d));} while(0)
+# define DEBUGOUT_CONT(t) do { if (debug_level) \
+ fprintf (stderr, t); } while (0)
+# define DEBUGOUT_CONT_1(t,a) do { if (debug_level) \
+ fprintf (stderr, t, (a)); } while (0)
+# define DEBUGOUT_CONT_2(t,a,b) do { if (debug_level) \
+ fprintf (stderr, t, (a), (b)); } while (0)
+# define DEBUGOUT_CONT_3(t,a,b,c) do { if (debug_level) \
+ fprintf (stderr, t, (a), (b), (c)); } while (0)
+# define DEBUGOUT_LF() do { if (debug_level) \
+ putc ('\n', stderr); } while (0)
+
+#endif /* This source not used by scdaemon. */
+
+
+
+enum {
+ RDR_to_PC_NotifySlotChange= 0x50,
+ RDR_to_PC_HardwareError = 0x51,
+
+ PC_to_RDR_SetParameters = 0x61,
+ PC_to_RDR_IccPowerOn = 0x62,
+ PC_to_RDR_IccPowerOff = 0x63,
+ PC_to_RDR_GetSlotStatus = 0x65,
+ PC_to_RDR_Secure = 0x69,
+ PC_to_RDR_T0APDU = 0x6a,
+ PC_to_RDR_Escape = 0x6b,
+ PC_to_RDR_GetParameters = 0x6c,
+ PC_to_RDR_ResetParameters = 0x6d,
+ PC_to_RDR_IccClock = 0x6e,
+ PC_to_RDR_XfrBlock = 0x6f,
+ PC_to_RDR_Mechanical = 0x71,
+ PC_to_RDR_Abort = 0x72,
+ PC_to_RDR_SetDataRate = 0x73,
+
+ RDR_to_PC_DataBlock = 0x80,
+ RDR_to_PC_SlotStatus = 0x81,
+ RDR_to_PC_Parameters = 0x82,
+ RDR_to_PC_Escape = 0x83,
+ RDR_to_PC_DataRate = 0x84
+};
+
+
+/* Two macro to detect whether a CCID command has failed and to get
+ the error code. These macros assume that we can access the
+ mandatory first 10 bytes of a CCID message in BUF. */
+#define CCID_COMMAND_FAILED(buf) ((buf)[7] & 0x40)
+#define CCID_ERROR_CODE(buf) (((unsigned char *)(buf))[8])
+
+
+/* We need to know the vendor to do some hacks. */
+enum {
+ VENDOR_SCM = 0x04e6,
+ VENDOR_CHERRY = 0x046a,
+ VENDOR_OMNIKEY= 0x076b,
+ VENDOR_GEMPC = 0x08e6
+};
+
+
+/* Store information on the driver's state. A pointer to such a
+ structure is used as handle for most functions. */
+struct ccid_driver_s
+{
+ usb_dev_handle *idev;
+ char *rid;
+ unsigned short id_vendor;
+ unsigned short id_product;
+ unsigned short bcd_device;
+ int ifc_no;
+ int ep_bulk_out;
+ int ep_bulk_in;
+ int ep_intr;
+ int seqno;
+ unsigned char t1_ns;
+ unsigned char t1_nr;
+ int nonnull_nad;
+ int auto_ifsd;
+ int max_ifsd;
+ int ifsd;
+ int powered_off;
+ int has_pinpad;
+ int apdu_level; /* Reader supports short APDU level exchange. */
+};
+
+
+static int initialized_usb; /* Tracks whether USB has been initialized. */
+static int debug_level; /* Flag to control the debug output.
+ 0 = No debugging
+ 1 = USB I/O info
+ 2 = T=1 protocol tracing
+ */
+
+
+static unsigned int compute_edc (const unsigned char *data, size_t datalen,
+ int use_crc);
+static int bulk_out (ccid_driver_t handle, unsigned char *msg, size_t msglen);
+static int bulk_in (ccid_driver_t handle, unsigned char *buffer, size_t length,
+ size_t *nread, int expected_type, int seqno, int timeout,
+ int no_debug);
+
+/* Convert a little endian stored 4 byte value into an unsigned
+ integer. */
+static unsigned int
+convert_le_u32 (const unsigned char *buf)
+{
+ return buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+}
+
+static void
+set_msg_len (unsigned char *msg, unsigned int length)
+{
+ msg[1] = length;
+ msg[2] = length >> 8;
+ msg[3] = length >> 16;
+ msg[4] = length >> 24;
+}
+
+
+/* Pint an error message for a failed CCID command including a textual
+ error code. MSG is shall be the CCID message of at least 10 bytes. */
+static void
+print_command_failed (const unsigned char *msg)
+{
+ const char *t;
+ char buffer[100];
+ int ec;
+
+ if (!debug_level)
+ return;
+
+ ec = CCID_ERROR_CODE (msg);
+ switch (ec)
+ {
+ case 0x00: t = "Command not supported"; break;
+
+ case 0xE0: t = "Slot busy"; break;
+ case 0xEF: t = "PIN cancelled"; break;
+ case 0xF0: t = "PIN timeout"; break;
+
+ case 0xF2: t = "Automatic sequence ongoing"; break;
+ case 0xF3: t = "Deactivated Protocol"; break;
+ case 0xF4: t = "Procedure byte conflict"; break;
+ case 0xF5: t = "ICC class not supported"; break;
+ case 0xF6: t = "ICC protocol not supported"; break;
+ case 0xF7: t = "Bad checksum in ATR"; break;
+ case 0xF8: t = "Bad TS in ATR"; break;
+
+ case 0xFB: t = "An all inclusive hardware error occurred"; break;
+ case 0xFC: t = "Overrun error while talking to the ICC"; break;
+ case 0xFD: t = "Parity error while talking to the ICC"; break;
+ case 0xFE: t = "CCID timed out while talking to the ICC"; break;
+ case 0xFF: t = "Host aborted the current activity"; break;
+
+ default:
+ if (ec > 0 && ec < 128)
+ sprintf (buffer, "Parameter error at offset %d", ec);
+ else
+ sprintf (buffer, "Error code %02X", ec);
+ t = buffer;
+ break;
+ }
+ DEBUGOUT_1 ("CCID command failed: %s\n", t);
+}
+
+
+
+
+/* Parse a CCID descriptor, optionally print all available features
+ and test whether this reader is usable by this driver. Returns 0
+ if it is usable.
+
+ Note, that this code is based on the one in lsusb.c of the
+ usb-utils package, I wrote on 2003-09-01. -wk. */
+static int
+parse_ccid_descriptor (ccid_driver_t handle,
+ const unsigned char *buf, size_t buflen)
+{
+ unsigned int i;
+ unsigned int us;
+ int have_t1 = 0, have_tpdu=0, have_auto_conf = 0;
+
+
+ handle->nonnull_nad = 0;
+ handle->auto_ifsd = 0;
+ handle->max_ifsd = 32;
+ handle->ifsd = 0;
+ handle->has_pinpad = 0;
+ handle->apdu_level = 0;
+ DEBUGOUT_3 ("idVendor: %04X idProduct: %04X bcdDevice: %04X\n",
+ handle->id_vendor, handle->id_product, handle->bcd_device);
+ if (buflen < 54 || buf[0] < 54)
+ {
+ DEBUGOUT ("CCID device descriptor is too short\n");
+ return -1;
+ }
+
+ DEBUGOUT ("ChipCard Interface Descriptor:\n");
+ DEBUGOUT_1 (" bLength %5u\n", buf[0]);
+ DEBUGOUT_1 (" bDescriptorType %5u\n", buf[1]);
+ DEBUGOUT_2 (" bcdCCID %2x.%02x", buf[3], buf[2]);
+ if (buf[3] != 1 || buf[2] != 0)
+ DEBUGOUT_CONT(" (Warning: Only accurate for version 1.0)");
+ DEBUGOUT_LF ();
+
+ DEBUGOUT_1 (" nMaxSlotIndex %5u\n", buf[4]);
+ DEBUGOUT_2 (" bVoltageSupport %5u %s\n",
+ buf[5], (buf[5] == 1? "5.0V" : buf[5] == 2? "3.0V"
+ : buf[5] == 3? "1.8V":"?"));
+
+ us = convert_le_u32 (buf+6);
+ DEBUGOUT_1 (" dwProtocols %5u ", us);
+ if ((us & 1))
+ DEBUGOUT_CONT (" T=0");
+ if ((us & 2))
+ {
+ DEBUGOUT_CONT (" T=1");
+ have_t1 = 1;
+ }
+ if ((us & ~3))
+ DEBUGOUT_CONT (" (Invalid values detected)");
+ DEBUGOUT_LF ();
+
+ us = convert_le_u32(buf+10);
+ DEBUGOUT_1 (" dwDefaultClock %5u\n", us);
+ us = convert_le_u32(buf+14);
+ DEBUGOUT_1 (" dwMaxiumumClock %5u\n", us);
+ DEBUGOUT_1 (" bNumClockSupported %5u\n", buf[18]);
+ us = convert_le_u32(buf+19);
+ DEBUGOUT_1 (" dwDataRate %7u bps\n", us);
+ us = convert_le_u32(buf+23);
+ DEBUGOUT_1 (" dwMaxDataRate %7u bps\n", us);
+ DEBUGOUT_1 (" bNumDataRatesSupp. %5u\n", buf[27]);
+
+ us = convert_le_u32(buf+28);
+ DEBUGOUT_1 (" dwMaxIFSD %5u\n", us);
+ handle->max_ifsd = us;
+
+ us = convert_le_u32(buf+32);
+ DEBUGOUT_1 (" dwSyncProtocols %08X ", us);
+ if ((us&1))
+ DEBUGOUT_CONT ( " 2-wire");
+ if ((us&2))
+ DEBUGOUT_CONT ( " 3-wire");
+ if ((us&4))
+ DEBUGOUT_CONT ( " I2C");
+ DEBUGOUT_LF ();
+
+ us = convert_le_u32(buf+36);
+ DEBUGOUT_1 (" dwMechanical %08X ", us);
+ if ((us & 1))
+ DEBUGOUT_CONT (" accept");
+ if ((us & 2))
+ DEBUGOUT_CONT (" eject");
+ if ((us & 4))
+ DEBUGOUT_CONT (" capture");
+ if ((us & 8))
+ DEBUGOUT_CONT (" lock");
+ DEBUGOUT_LF ();
+
+ us = convert_le_u32(buf+40);
+ DEBUGOUT_1 (" dwFeatures %08X\n", us);
+ if ((us & 0x0002))
+ {
+ DEBUGOUT (" Auto configuration based on ATR\n");
+ have_auto_conf = 1;
+ }
+ if ((us & 0x0004))
+ DEBUGOUT (" Auto activation on insert\n");
+ if ((us & 0x0008))
+ DEBUGOUT (" Auto voltage selection\n");
+ if ((us & 0x0010))
+ DEBUGOUT (" Auto clock change\n");
+ if ((us & 0x0020))
+ DEBUGOUT (" Auto baud rate change\n");
+ if ((us & 0x0040))
+ DEBUGOUT (" Auto parameter negotation made by CCID\n");
+ else if ((us & 0x0080))
+ DEBUGOUT (" Auto PPS made by CCID\n");
+ else if ((us & (0x0040 | 0x0080)))
+ DEBUGOUT (" WARNING: conflicting negotation features\n");
+
+ if ((us & 0x0100))
+ DEBUGOUT (" CCID can set ICC in clock stop mode\n");
+ if ((us & 0x0200))
+ {
+ DEBUGOUT (" NAD value other than 0x00 accepted\n");
+ handle->nonnull_nad = 1;
+ }
+ if ((us & 0x0400))
+ {
+ DEBUGOUT (" Auto IFSD exchange\n");
+ handle->auto_ifsd = 1;
+ }
+
+ if ((us & 0x00010000))
+ {
+ DEBUGOUT (" TPDU level exchange\n");
+ have_tpdu = 1;
+ }
+ else if ((us & 0x00020000))
+ {
+ DEBUGOUT (" Short APDU level exchange\n");
+ handle->apdu_level = 1;
+ }
+ else if ((us & 0x00040000))
+ {
+ DEBUGOUT (" Short and extended APDU level exchange\n");
+ handle->apdu_level = 1;
+ }
+ else if ((us & 0x00070000))
+ DEBUGOUT (" WARNING: conflicting exchange levels\n");
+
+ us = convert_le_u32(buf+44);
+ DEBUGOUT_1 (" dwMaxCCIDMsgLen %5u\n", us);
+
+ DEBUGOUT ( " bClassGetResponse ");
+ if (buf[48] == 0xff)
+ DEBUGOUT_CONT ("echo\n");
+ else
+ DEBUGOUT_CONT_1 (" %02X\n", buf[48]);
+
+ DEBUGOUT ( " bClassEnvelope ");
+ if (buf[49] == 0xff)
+ DEBUGOUT_CONT ("echo\n");
+ else
+ DEBUGOUT_CONT_1 (" %02X\n", buf[48]);
+
+ DEBUGOUT ( " wlcdLayout ");
+ if (!buf[50] && !buf[51])
+ DEBUGOUT_CONT ("none\n");
+ else
+ DEBUGOUT_CONT_2 ("%u cols %u lines\n", buf[50], buf[51]);
+
+ DEBUGOUT_1 (" bPINSupport %5u ", buf[52]);
+ if ((buf[52] & 1))
+ {
+ DEBUGOUT_CONT ( " verification");
+ handle->has_pinpad |= 1;
+ }
+ if ((buf[52] & 2))
+ {
+ DEBUGOUT_CONT ( " modification");
+ handle->has_pinpad |= 2;
+ }
+ DEBUGOUT_LF ();
+
+ DEBUGOUT_1 (" bMaxCCIDBusySlots %5u\n", buf[53]);
+
+ if (buf[0] > 54) {
+ DEBUGOUT (" junk ");
+ for (i=54; i < buf[0]-54; i++)
+ DEBUGOUT_CONT_1 (" %02X", buf[i]);
+ DEBUGOUT_LF ();
+ }
+
+ if (!have_t1 || !(have_tpdu || handle->apdu_level) || !have_auto_conf)
+ {
+ DEBUGOUT ("this drivers requires that the reader supports T=1, "
+ "TPDU or APDU level exchange and auto configuration - "
+ "this is not available\n");
+ return -1;
+ }
+
+
+ /* SCM drivers get stuck in their internal USB stack if they try to
+ send a frame of n*wMaxPacketSize back to us. Given that
+ wMaxPacketSize is 64 for these readers we set the IFSD to a value
+ lower than that:
+ 64 - 10 CCID header - 4 T1frame - 2 reserved = 48
+ Product Ids:
+ 0xe001 - SCR 331
+ 0x5111 - SCR 331-DI
+ 0x5115 - SCR 335
+ 0xe003 - SPR 532
+ */
+ if (handle->id_vendor == VENDOR_SCM
+ && handle->max_ifsd > 48
+ && ( (handle->id_product == 0xe001 && handle->bcd_device < 0x0516)
+ ||(handle->id_product == 0x5111 && handle->bcd_device < 0x0620)
+ ||(handle->id_product == 0x5115 && handle->bcd_device < 0x0514)
+ ||(handle->id_product == 0xe003 && handle->bcd_device < 0x0504)
+ ))
+ {
+ DEBUGOUT ("enabling workaround for buggy SCM readers\n");
+ handle->max_ifsd = 48;
+ }
+
+
+ return 0;
+}
+
+
+static char *
+get_escaped_usb_string (usb_dev_handle *idev, int idx,
+ const char *prefix, const char *suffix)
+{
+ int rc;
+ unsigned char buf[280];
+ unsigned char *s;
+ unsigned int langid;
+ size_t i, n, len;
+ char *result;
+
+ if (!idx)
+ return NULL;
+
+ /* Fixme: The next line is for the current Valgrid without support
+ for USB IOCTLs. */
+ memset (buf, 0, sizeof buf);
+
+ /* First get the list of supported languages and use the first one.
+ If we do don't find it we try to use English. Note that this is
+ all in a 2 bute Unicode encoding using little endian. */
+ rc = usb_control_msg (idev, USB_ENDPOINT_IN, USB_REQ_GET_DESCRIPTOR,
+ (USB_DT_STRING << 8), 0,
+ (char*)buf, sizeof buf, 1000 /* ms timeout */);
+ if (rc < 4)
+ langid = 0x0409; /* English. */
+ else
+ langid = (buf[3] << 8) | buf[2];
+
+ rc = usb_control_msg (idev, USB_ENDPOINT_IN, USB_REQ_GET_DESCRIPTOR,
+ (USB_DT_STRING << 8) + idx, langid,
+ (char*)buf, sizeof buf, 1000 /* ms timeout */);
+ if (rc < 2 || buf[1] != USB_DT_STRING)
+ return NULL; /* Error or not a string. */
+ len = buf[0];
+ if (len > rc)
+ return NULL; /* Larger than our buffer. */
+
+ for (s=buf+2, i=2, n=0; i+1 < len; i += 2, s += 2)
+ {
+ if (s[1])
+ n++; /* High byte set. */
+ else if (*s <= 0x20 || *s >= 0x7f || *s == '%' || *s == ':')
+ n += 3 ;
+ else
+ n++;
+ }
+
+ result = malloc (strlen (prefix) + n + strlen (suffix) + 1);
+ if (!result)
+ return NULL;
+
+ strcpy (result, prefix);
+ n = strlen (prefix);
+ for (s=buf+2, i=2; i+1 < len; i += 2, s += 2)
+ {
+ if (s[1])
+ result[n++] = '\xff'; /* High byte set. */
+ else if (*s <= 0x20 || *s >= 0x7f || *s == '%' || *s == ':')
+ {
+ sprintf (result+n, "%%%02X", *s);
+ n += 3;
+ }
+ else
+ result[n++] = *s;
+ }
+ strcpy (result+n, suffix);
+
+ return result;
+}
+
+/* This function creates an reader id to be used to find the same
+ physical reader after a reset. It returns an allocated and possibly
+ percent escaped string or NULL if not enough memory is available. */
+static char *
+make_reader_id (usb_dev_handle *idev,
+ unsigned int vendor, unsigned int product,
+ unsigned char serialno_index)
+{
+ char *rid;
+ char prefix[20];
+
+ sprintf (prefix, "%04X:%04X:", (vendor & 0xfff), (product & 0xffff));
+ rid = get_escaped_usb_string (idev, serialno_index, prefix, ":0");
+ if (!rid)
+ {
+ rid = malloc (strlen (prefix) + 3 + 1);
+ if (!rid)
+ return NULL;
+ strcpy (rid, prefix);
+ strcat (rid, "X:0");
+ }
+ return rid;
+}
+
+
+/* Helper to find the endpoint from an interface descriptor. */
+static int
+find_endpoint (struct usb_interface_descriptor *ifcdesc, int mode)
+{
+ int no;
+ int want_bulk_in = 0;
+
+ if (mode == 1)
+ want_bulk_in = 0x80;
+ for (no=0; no < ifcdesc->bNumEndpoints; no++)
+ {
+ struct usb_endpoint_descriptor *ep = ifcdesc->endpoint + no;
+ if (ep->bDescriptorType != USB_DT_ENDPOINT)
+ ;
+ else if (mode == 2
+ && ((ep->bmAttributes & USB_ENDPOINT_TYPE_MASK)
+ == USB_ENDPOINT_TYPE_INTERRUPT)
+ && (ep->bEndpointAddress & 0x80))
+ return (ep->bEndpointAddress & 0x0f);
+ else if (((ep->bmAttributes & USB_ENDPOINT_TYPE_MASK)
+ == USB_ENDPOINT_TYPE_BULK)
+ && (ep->bEndpointAddress & 0x80) == want_bulk_in)
+ return (ep->bEndpointAddress & 0x0f);
+ }
+ /* Should never happen. */
+ return mode == 2? 0x83 : mode == 1? 0x82 :1;
+}
+
+
+
+/* Combination function to either scan all CCID devices or to find and
+ open one specific device.
+
+ With READERNO = -1 and READERID is NULL, scan mode is used and
+ R_RID should be the address where to store the list of reader_ids
+ we found. If on return this list is empty, no CCID device has been
+ found; otherwise it points to an allocated linked list of reader
+ IDs. Note that in this mode the function always returns NULL.
+
+ With READERNO >= 0 or READERID is not NULL find mode is used. This
+ uses the same algorithm as the scan mode but stops and returns at
+ the entry number READERNO and return the handle for the the opened
+ USB device. If R_ID is not NULL it will receive the reader ID of
+ that device. If R_DEV is not NULL it will the device pointer of
+ that device. If IFCDESC_EXTRA is NOT NULL it will receive a
+ malloced copy of the interfaces "extra: data filed;
+ IFCDESC_EXTRA_LEN receive the lengtyh of this field. If there is
+ no reader with number READERNO or that reader is not usable by our
+ implementation NULL will be returned. The caller must close a
+ returned USB device handle and free (if not passed as NULL) the
+ returned reader ID info as well as the IFCDESC_EXTRA. On error
+ NULL will get stored at R_RID, R_DEV, IFCDESC_EXTRA and
+ IFCDESC_EXTRA_LEN. With READERID being -1 the function stops if
+ the READERID was found.
+
+ Note that the first entry of the returned reader ID list in scan mode
+ corresponds with a READERNO of 0 in find mode.
+*/
+static usb_dev_handle *
+scan_or_find_devices (int readerno, const char *readerid,
+ char **r_rid,
+ struct usb_device **r_dev,
+ unsigned char **ifcdesc_extra,
+ size_t *ifcdesc_extra_len,
+ int *interface_number,
+ int *ep_bulk_out, int *ep_bulk_in, int *ep_intr)
+{
+ char *rid_list = NULL;
+ int count = 0;
+ struct usb_bus *busses, *bus;
+ struct usb_device *dev = NULL;
+ usb_dev_handle *idev = NULL;
+ int scan_mode = (readerno == -1 && !readerid);
+
+ /* Set return values to a default. */
+ if (r_rid)
+ *r_rid = NULL;
+ if (r_dev)
+ *r_dev = NULL;
+ if (ifcdesc_extra)
+ *ifcdesc_extra = NULL;
+ if (ifcdesc_extra_len)
+ *ifcdesc_extra_len = 0;
+ if (interface_number)
+ *interface_number = 0;
+
+ /* See whether we want scan or find mode. */
+ if (scan_mode)
+ {
+ assert (r_rid);
+ }
+
+ usb_find_busses();
+ usb_find_devices();
+
+#ifdef HAVE_USB_GET_BUSSES
+ busses = usb_get_busses();
+#else
+ busses = usb_busses;
+#endif
+
+ for (bus = busses; bus; bus = bus->next)
+ {
+ for (dev = bus->devices; dev; dev = dev->next)
+ {
+ int cfg_no;
+
+ for (cfg_no=0; cfg_no < dev->descriptor.bNumConfigurations; cfg_no++)
+ {
+ struct usb_config_descriptor *config = dev->config + cfg_no;
+ int ifc_no;
+
+ if(!config)
+ continue;
+
+ for (ifc_no=0; ifc_no < config->bNumInterfaces; ifc_no++)
+ {
+ struct usb_interface *interface
+ = config->interface + ifc_no;
+ int set_no;
+
+ if (!interface)
+ continue;
+
+ for (set_no=0; set_no < interface->num_altsetting; set_no++)
+ {
+ struct usb_interface_descriptor *ifcdesc
+ = interface->altsetting + set_no;
+ char *rid;
+
+ /* The second condition is for some SCM Micro
+ SPR 532 which does not know about the
+ assigned CCID class. Instead of trying to
+ interpret the strings we simply look at the
+ product ID. */
+ if (ifcdesc && ifcdesc->extra
+ && ( (ifcdesc->bInterfaceClass == 11
+ && ifcdesc->bInterfaceSubClass == 0
+ && ifcdesc->bInterfaceProtocol == 0)
+ || (ifcdesc->bInterfaceClass == 255
+ && dev->descriptor.idVendor == 0x04e6
+ && dev->descriptor.idProduct == 0xe003)))
+ {
+ idev = usb_open (dev);
+ if (!idev)
+ {
+ DEBUGOUT_1 ("usb_open failed: %s\n",
+ strerror (errno));
+ continue;
+ }
+
+ rid = make_reader_id (idev,
+ dev->descriptor.idVendor,
+ dev->descriptor.idProduct,
+ dev->descriptor.iSerialNumber);
+ if (rid)
+ {
+ if (scan_mode)
+ {
+ char *p;
+
+ /* We are collecting infos about all
+ available CCID readers. Store
+ them and continue. */
+ DEBUGOUT_2 ("found CCID reader %d "
+ "(ID=%s)\n",
+ count, rid );
+ if ((p = malloc ((rid_list?
+ strlen (rid_list):0)
+ + 1 + strlen (rid)
+ + 1)))
+ {
+ *p = 0;
+ if (rid_list)
+ {
+ strcat (p, rid_list);
+ free (rid_list);
+ }
+ strcat (p, rid);
+ strcat (p, "\n");
+ rid_list = p;
+ }
+ else /* Out of memory. */
+ free (rid);
+ rid = NULL;
+ count++;
+ }
+ else if (!readerno
+ || (readerno < 0
+ && readerid
+ && !strcmp (readerid, rid)))
+ {
+ /* We found the requested reader. */
+ if (ifcdesc_extra && ifcdesc_extra_len)
+ {
+ *ifcdesc_extra = malloc (ifcdesc
+ ->extralen);
+ if (!*ifcdesc_extra)
+ {
+ usb_close (idev);
+ free (rid);
+ return NULL; /* Out of core. */
+ }
+ memcpy (*ifcdesc_extra, ifcdesc->extra,
+ ifcdesc->extralen);
+ *ifcdesc_extra_len = ifcdesc->extralen;
+ }
+ if (interface_number)
+ *interface_number = (ifcdesc->
+ bInterfaceNumber);
+ if (ep_bulk_out)
+ *ep_bulk_out = find_endpoint (ifcdesc, 0);
+ if (ep_bulk_in)
+ *ep_bulk_in = find_endpoint (ifcdesc, 1);
+ if (ep_intr)
+ *ep_intr = find_endpoint (ifcdesc, 2);
+
+
+ if (r_dev)
+ *r_dev = dev;
+ if (r_rid)
+ {
+ *r_rid = rid;
+ rid = NULL;
+ }
+ else
+ free (rid);
+ return idev; /* READY. */
+ }
+ else
+ {
+ /* This is not yet the reader we
+ want. fixme: We could avoid the
+ extra usb_open in this case. */
+ if (readerno >= 0)
+ readerno--;
+ }
+ free (rid);
+ }
+
+ usb_close (idev);
+ idev = NULL;
+ goto next_device;
+ }
+ }
+ }
+ }
+ next_device:
+ ;
+ }
+ }
+
+ if (scan_mode)
+ *r_rid = rid_list;
+
+ return NULL;
+}
+
+
+/* Set the level of debugging to to usea dn return the old level. -1
+ just returns the old level. A level of 0 disables debugging, 1
+ enables debugging, 2 enables additional tracing of the T=1
+ protocol, other values are not yet defined. */
+int
+ccid_set_debug_level (int level)
+{
+ int old = debug_level;
+ if (level != -1)
+ debug_level = level;
+ return old;
+}
+
+
+char *
+ccid_get_reader_list (void)
+{
+ char *reader_list;
+
+ if (!initialized_usb)
+ {
+ usb_init ();
+ initialized_usb = 1;
+ }
+
+ scan_or_find_devices (-1, NULL, &reader_list, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL);
+ return reader_list;
+}
+
+
+/* Open the reader with the internal number READERNO and return a
+ pointer to be used as handle in HANDLE. Returns 0 on success. */
+int
+ccid_open_reader (ccid_driver_t *handle, const char *readerid)
+{
+ int rc = 0;
+ struct usb_device *dev = NULL;
+ usb_dev_handle *idev = NULL;
+ char *rid = NULL;
+ unsigned char *ifcdesc_extra = NULL;
+ size_t ifcdesc_extra_len;
+ int readerno;
+ int ifc_no, ep_bulk_out, ep_bulk_in, ep_intr;
+
+ *handle = NULL;
+
+ if (!initialized_usb)
+ {
+ usb_init ();
+ initialized_usb = 1;
+ }
+
+ /* See whether we want to use the reader ID string or a reader
+ number. A readerno of -1 indicates that the reader ID string is
+ to be used. */
+ if (readerid && strchr (readerid, ':'))
+ readerno = -1; /* We want to use the readerid. */
+ else if (readerid)
+ {
+ readerno = atoi (readerid);
+ if (readerno < 0)
+ {
+ DEBUGOUT ("no CCID readers found\n");
+ rc = CCID_DRIVER_ERR_NO_READER;
+ goto leave;
+ }
+ }
+ else
+ readerno = 0; /* Default. */
+
+ idev = scan_or_find_devices (readerno, readerid, &rid, &dev,
+ &ifcdesc_extra, &ifcdesc_extra_len,
+ &ifc_no, &ep_bulk_out, &ep_bulk_in, &ep_intr);
+ if (!idev)
+ {
+ if (readerno == -1)
+ DEBUGOUT_1 ("no CCID reader with ID %s\n", readerid );
+ else
+ DEBUGOUT_1 ("no CCID reader with number %d\n", readerno );
+ rc = CCID_DRIVER_ERR_NO_READER;
+ goto leave;
+ }
+
+ /* Okay, this is a CCID reader. */
+ *handle = calloc (1, sizeof **handle);
+ if (!*handle)
+ {
+ DEBUGOUT ("out of memory\n");
+ rc = CCID_DRIVER_ERR_OUT_OF_CORE;
+ goto leave;
+ }
+ (*handle)->idev = idev;
+ (*handle)->rid = rid;
+ (*handle)->id_vendor = dev->descriptor.idVendor;
+ (*handle)->id_product = dev->descriptor.idProduct;
+ (*handle)->bcd_device = dev->descriptor.bcdDevice;
+ (*handle)->ifc_no = ifc_no;
+ (*handle)->ep_bulk_out = ep_bulk_out;
+ (*handle)->ep_bulk_in = ep_bulk_in;
+ (*handle)->ep_intr = ep_intr;
+
+ DEBUGOUT_2 ("using CCID reader %d (ID=%s)\n", readerno, rid );
+
+
+ if (parse_ccid_descriptor (*handle, ifcdesc_extra, ifcdesc_extra_len))
+ {
+ DEBUGOUT ("device not supported\n");
+ rc = CCID_DRIVER_ERR_NO_READER;
+ goto leave;
+ }
+
+ rc = usb_claim_interface (idev, ifc_no);
+ if (rc)
+ {
+ DEBUGOUT_1 ("usb_claim_interface failed: %d\n", rc);
+ rc = CCID_DRIVER_ERR_CARD_IO_ERROR;
+ goto leave;
+ }
+
+ leave:
+ free (ifcdesc_extra);
+ if (rc)
+ {
+ free (rid);
+ if (idev)
+ usb_close (idev);
+ free (*handle);
+ *handle = NULL;
+ }
+
+ return rc;
+}
+
+
+static void
+do_close_reader (ccid_driver_t handle)
+{
+ int rc;
+ unsigned char msg[100];
+ size_t msglen;
+ unsigned char seqno;
+
+ if (!handle->powered_off)
+ {
+ msg[0] = PC_to_RDR_IccPowerOff;
+ msg[5] = 0; /* slot */
+ msg[6] = seqno = handle->seqno++;
+ msg[7] = 0; /* RFU */
+ msg[8] = 0; /* RFU */
+ msg[9] = 0; /* RFU */
+ set_msg_len (msg, 0);
+ msglen = 10;
+
+ rc = bulk_out (handle, msg, msglen);
+ if (!rc)
+ bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_SlotStatus,
+ seqno, 2000, 0);
+ handle->powered_off = 1;
+ }
+ if (handle->idev)
+ {
+ usb_release_interface (handle->idev, handle->ifc_no);
+ usb_close (handle->idev);
+ handle->idev = NULL;
+ }
+}
+
+
+/* Reset a reader on HANDLE. This is useful in case a reader has been
+ plugged of and inserted at a different port. By resetting the
+ handle, the same reader will be get used. Note, that on error the
+ handle won't get released.
+
+ This does not return an ATR, so ccid_get_atr should be called right
+ after this one.
+*/
+int
+ccid_shutdown_reader (ccid_driver_t handle)
+{
+ int rc = 0;
+ struct usb_device *dev = NULL;
+ usb_dev_handle *idev = NULL;
+ unsigned char *ifcdesc_extra = NULL;
+ size_t ifcdesc_extra_len;
+ int ifc_no, ep_bulk_out, ep_bulk_in, ep_intr;
+
+ if (!handle || !handle->rid)
+ return CCID_DRIVER_ERR_INV_VALUE;
+
+ do_close_reader (handle);
+
+ idev = scan_or_find_devices (-1, handle->rid, NULL, &dev,
+ &ifcdesc_extra, &ifcdesc_extra_len,
+ &ifc_no, &ep_bulk_out, &ep_bulk_in, &ep_intr);
+ if (!idev)
+ {
+ DEBUGOUT_1 ("no CCID reader with ID %s\n", handle->rid);
+ return CCID_DRIVER_ERR_NO_READER;
+ }
+
+
+ handle->idev = idev;
+ handle->ifc_no = ifc_no;
+ handle->ep_bulk_out = ep_bulk_out;
+ handle->ep_bulk_in = ep_bulk_in;
+ handle->ep_intr = ep_intr;
+
+ if (parse_ccid_descriptor (handle, ifcdesc_extra, ifcdesc_extra_len))
+ {
+ DEBUGOUT ("device not supported\n");
+ rc = CCID_DRIVER_ERR_NO_READER;
+ goto leave;
+ }
+
+ rc = usb_claim_interface (idev, ifc_no);
+ if (rc)
+ {
+ DEBUGOUT_1 ("usb_claim_interface failed: %d\n", rc);
+ rc = CCID_DRIVER_ERR_CARD_IO_ERROR;
+ goto leave;
+ }
+
+ leave:
+ free (ifcdesc_extra);
+ if (rc)
+ {
+ usb_close (handle->idev);
+ handle->idev = NULL;
+ }
+
+ return rc;
+
+}
+
+
+/* Close the reader HANDLE. */
+int
+ccid_close_reader (ccid_driver_t handle)
+{
+ if (!handle || !handle->idev)
+ return 0;
+
+ do_close_reader (handle);
+ free (handle->rid);
+ free (handle);
+ return 0;
+}
+
+
+/* Return False if a card is present and powered. */
+int
+ccid_check_card_presence (ccid_driver_t handle)
+{
+
+ return -1;
+}
+
+
+/* Write a MSG of length MSGLEN to the designated bulk out endpoint.
+ Returns 0 on success. */
+static int
+bulk_out (ccid_driver_t handle, unsigned char *msg, size_t msglen)
+{
+ int rc;
+
+ rc = usb_bulk_write (handle->idev,
+ handle->ep_bulk_out,
+ (char*)msg, msglen,
+ 1000 /* ms timeout */);
+ if (rc == msglen)
+ return 0;
+
+ if (rc == -1)
+ DEBUGOUT_1 ("usb_bulk_write error: %s\n", strerror (errno));
+ else
+ DEBUGOUT_1 ("usb_bulk_write failed: %d\n", rc);
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+}
+
+
+/* Read a maximum of LENGTH bytes from the bulk in endpoint into
+ BUFFER and return the actual read number if bytes in NREAD. SEQNO
+ is the sequence number used to send the request and EXPECTED_TYPE
+ the type of message we expect. Does checks on the ccid
+ header. TIMEOUT is the timeout value in ms. NO_DEBUG may be set to
+ avoid debug messages in case of no error. Returns 0 on success. */
+static int
+bulk_in (ccid_driver_t handle, unsigned char *buffer, size_t length,
+ size_t *nread, int expected_type, int seqno, int timeout,
+ int no_debug)
+{
+ int i, rc;
+ size_t msglen;
+
+ /* Fixme: The next line for the current Valgrind without support
+ for USB IOCTLs. */
+ memset (buffer, 0, length);
+ retry:
+ rc = usb_bulk_read (handle->idev,
+ handle->ep_bulk_in,
+ (char*)buffer, length,
+ timeout);
+ if (rc < 0)
+ {
+ DEBUGOUT_1 ("usb_bulk_read error: %s\n", strerror (errno));
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+
+ *nread = msglen = rc;
+
+ if (msglen < 10)
+ {
+ DEBUGOUT_1 ("bulk-in msg too short (%u)\n", (unsigned int)msglen);
+ return CCID_DRIVER_ERR_INV_VALUE;
+ }
+ if (buffer[0] != expected_type)
+ {
+ DEBUGOUT_1 ("unexpected bulk-in msg type (%02x)\n", buffer[0]);
+ return CCID_DRIVER_ERR_INV_VALUE;
+ }
+ if (buffer[5] != 0)
+ {
+ DEBUGOUT_1 ("unexpected bulk-in slot (%d)\n", buffer[5]);
+ return CCID_DRIVER_ERR_INV_VALUE;
+ }
+ if (buffer[6] != seqno)
+ {
+ DEBUGOUT_2 ("bulk-in seqno does not match (%d/%d)\n",
+ seqno, buffer[6]);
+ return CCID_DRIVER_ERR_INV_VALUE;
+ }
+
+ if ( !(buffer[7] & 0x03) && (buffer[7] & 0xC0) == 0x80)
+ {
+ /* Card present and active, time extension requested. */
+ DEBUGOUT_2 ("time extension requested (%02X,%02X)\n",
+ buffer[7], buffer[8]);
+ goto retry;
+ }
+
+ if (!no_debug)
+ {
+ DEBUGOUT_3 ("status: %02X error: %02X octet[9]: %02X\n"
+ " data:", buffer[7], buffer[8], buffer[9] );
+ for (i=10; i < msglen; i++)
+ DEBUGOUT_CONT_1 (" %02X", buffer[i]);
+ DEBUGOUT_LF ();
+ }
+ if (CCID_COMMAND_FAILED (buffer))
+ print_command_failed (buffer);
+
+ /* Check whether a card is at all available. Note: If you add new
+ error codes here, check whether they need to be ignored in
+ send_escape_cmd. */
+ switch ((buffer[7] & 0x03))
+ {
+ case 0: /* no error */ break;
+ case 1: return CCID_DRIVER_ERR_CARD_INACTIVE;
+ case 2: return CCID_DRIVER_ERR_NO_CARD;
+ case 3: /* RFU */ break;
+ }
+ return 0;
+}
+
+
+/* Note that this function won't return the error codes NO_CARD or
+ CARD_INACTIVE. IF RESULT is not NULL, the result from the
+ operation will get returned in RESULT and its length in RESULTLEN.
+ If the response is larger than RESULTMAX, an error is returned and
+ the required buffer length returned in RESULTLEN. */
+static int
+send_escape_cmd (ccid_driver_t handle,
+ const unsigned char *data, size_t datalen,
+ unsigned char *result, size_t resultmax, size_t *resultlen)
+{
+ int i, rc;
+ unsigned char msg[100];
+ size_t msglen;
+ unsigned char seqno;
+
+ if (resultlen)
+ *resultlen = 0;
+
+ if (datalen > sizeof msg - 10)
+ return CCID_DRIVER_ERR_INV_VALUE; /* Escape data too large. */
+
+ msg[0] = PC_to_RDR_Escape;
+ msg[5] = 0; /* slot */
+ msg[6] = seqno = handle->seqno++;
+ msg[7] = 0; /* RFU */
+ msg[8] = 0; /* RFU */
+ msg[9] = 0; /* RFU */
+ memcpy (msg+10, data, datalen);
+ msglen = 10 + datalen;
+ set_msg_len (msg, datalen);
+
+ DEBUGOUT ("sending");
+ for (i=0; i < msglen; i++)
+ DEBUGOUT_CONT_1 (" %02X", msg[i]);
+ DEBUGOUT_LF ();
+ rc = bulk_out (handle, msg, msglen);
+ if (rc)
+ return rc;
+ rc = bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_Escape,
+ seqno, 5000, 0);
+ if (result)
+ switch (rc)
+ {
+ /* We need to ignore certain errorcode here. */
+ case 0:
+ case CCID_DRIVER_ERR_CARD_INACTIVE:
+ case CCID_DRIVER_ERR_NO_CARD:
+ {
+ if (msglen < 10 || (msglen-10) > resultmax )
+ rc = CCID_DRIVER_ERR_INV_VALUE; /* Invalid length of response. */
+ else
+ {
+ memcpy (result, msg+10, msglen-10);
+ *resultlen = msglen-10;
+ }
+ rc = 0;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return rc;
+}
+
+
+int
+ccid_transceive_escape (ccid_driver_t handle,
+ const unsigned char *data, size_t datalen,
+ unsigned char *resp, size_t maxresplen, size_t *nresp)
+{
+ return send_escape_cmd (handle, data, datalen, resp, maxresplen, nresp);
+}
+
+
+
+/* experimental */
+int
+ccid_poll (ccid_driver_t handle)
+{
+ int rc;
+ unsigned char msg[10];
+ size_t msglen;
+ int i, j;
+
+ rc = usb_bulk_read (handle->idev,
+ handle->ep_intr,
+ (char*)msg, sizeof msg,
+ 0 /* ms timeout */ );
+ if (rc < 0 && errno == ETIMEDOUT)
+ return 0;
+
+ if (rc < 0)
+ {
+ DEBUGOUT_1 ("usb_intr_read error: %s\n", strerror (errno));
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+
+ msglen = rc;
+ rc = 0;
+
+ if (msglen < 1)
+ {
+ DEBUGOUT ("intr-in msg too short\n");
+ return CCID_DRIVER_ERR_INV_VALUE;
+ }
+
+ if (msg[0] == RDR_to_PC_NotifySlotChange)
+ {
+ DEBUGOUT ("notify slot change:");
+ for (i=1; i < msglen; i++)
+ for (j=0; j < 4; j++)
+ DEBUGOUT_CONT_3 (" %d:%c%c",
+ (i-1)*4+j,
+ (msg[i] & (1<<(j*2)))? 'p':'-',
+ (msg[i] & (2<<(j*2)))? '*':' ');
+ DEBUGOUT_LF ();
+ }
+ else if (msg[0] == RDR_to_PC_HardwareError)
+ {
+ DEBUGOUT ("hardware error occured\n");
+ }
+ else
+ {
+ DEBUGOUT_1 ("unknown intr-in msg of type %02X\n", msg[0]);
+ }
+
+ return 0;
+}
+
+
+/* Note that this fucntion won't return the error codes NO_CARD or
+ CARD_INACTIVE */
+int
+ccid_slot_status (ccid_driver_t handle, int *statusbits)
+{
+ int rc;
+ unsigned char msg[100];
+ size_t msglen;
+ unsigned char seqno;
+ int retries = 0;
+
+ retry:
+ msg[0] = PC_to_RDR_GetSlotStatus;
+ msg[5] = 0; /* slot */
+ msg[6] = seqno = handle->seqno++;
+ msg[7] = 0; /* RFU */
+ msg[8] = 0; /* RFU */
+ msg[9] = 0; /* RFU */
+ set_msg_len (msg, 0);
+
+ rc = bulk_out (handle, msg, 10);
+ if (rc)
+ return rc;
+ /* Note that we set the NO_DEBUG flag here, so that the logs won't
+ get cluttered up by a ticker function checking for the slot
+ status and debugging enabled. */
+ rc = bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_SlotStatus,
+ seqno, retries? 1000 : 200, 1);
+ if (rc == CCID_DRIVER_ERR_CARD_IO_ERROR && retries < 3)
+ {
+ if (!retries)
+ {
+ DEBUGOUT ("USB: CALLING USB_CLEAR_HALT\n");
+ usb_clear_halt (handle->idev, handle->ep_bulk_in);
+ usb_clear_halt (handle->idev, handle->ep_bulk_out);
+ }
+ else
+ DEBUGOUT ("USB: RETRYING bulk_in AGAIN\n");
+ retries++;
+ goto retry;
+ }
+ if (rc && rc != CCID_DRIVER_ERR_NO_CARD
+ && rc != CCID_DRIVER_ERR_CARD_INACTIVE)
+ return rc;
+ *statusbits = (msg[7] & 3);
+
+ return 0;
+}
+
+
+int
+ccid_get_atr (ccid_driver_t handle,
+ unsigned char *atr, size_t maxatrlen, size_t *atrlen)
+{
+ int rc;
+ int statusbits;
+ unsigned char msg[100];
+ unsigned char *tpdu;
+ size_t msglen, tpdulen;
+ unsigned char seqno;
+ int use_crc = 0;
+ unsigned int edc;
+ int i;
+ int tried_iso = 0;
+
+ /* First check whether a card is available. */
+ rc = ccid_slot_status (handle, &statusbits);
+ if (rc)
+ return rc;
+ if (statusbits == 2)
+ return CCID_DRIVER_ERR_NO_CARD;
+
+ /* For an inactive and also for an active card, issue the PowerOn
+ command to get the ATR. */
+ again:
+ msg[0] = PC_to_RDR_IccPowerOn;
+ msg[5] = 0; /* slot */
+ msg[6] = seqno = handle->seqno++;
+ msg[7] = 0; /* power select (0=auto, 1=5V, 2=3V, 3=1.8V) */
+ msg[8] = 0; /* RFU */
+ msg[9] = 0; /* RFU */
+ set_msg_len (msg, 0);
+ msglen = 10;
+
+ rc = bulk_out (handle, msg, msglen);
+ if (rc)
+ return rc;
+ rc = bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_DataBlock,
+ seqno, 5000, 0);
+ if (rc)
+ return rc;
+ if (!tried_iso && CCID_COMMAND_FAILED (msg) && CCID_ERROR_CODE (msg) == 0xbb
+ && ((handle->id_vendor == VENDOR_CHERRY
+ && handle->id_product == 0x0005)
+ || (handle->id_vendor == VENDOR_GEMPC
+ && handle->id_product == 0x4433)
+ ))
+ {
+ tried_iso = 1;
+ /* Try switching to ISO mode. */
+ if (!send_escape_cmd (handle, (const unsigned char*)"\xF1\x01", 2,
+ NULL, 0, NULL))
+ goto again;
+ }
+ else if (CCID_COMMAND_FAILED (msg))
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+
+
+ handle->powered_off = 0;
+
+ if (atr)
+ {
+ size_t n = msglen - 10;
+
+ if (n > maxatrlen)
+ n = maxatrlen;
+ memcpy (atr, msg+10, n);
+ *atrlen = n;
+ }
+
+ /* Setup parameters to select T=1. */
+ msg[0] = PC_to_RDR_SetParameters;
+ msg[5] = 0; /* slot */
+ msg[6] = seqno = handle->seqno++;
+ msg[7] = 1; /* Select T=1. */
+ msg[8] = 0; /* RFU */
+ msg[9] = 0; /* RFU */
+
+ /* FIXME: Get those values from the ATR. */
+ msg[10]= 0x01; /* Fi/Di */
+ msg[11]= 0x10; /* LRC, direct convention. */
+ msg[12]= 0; /* Extra guardtime. */
+ msg[13]= 0x41; /* BWI/CWI */
+ msg[14]= 0; /* No clock stoppping. */
+ msg[15]= 254; /* IFSC */
+ msg[16]= 0; /* Does not support non default NAD values. */
+ set_msg_len (msg, 7);
+ msglen = 10 + 7;
+
+ DEBUGOUT ("sending");
+ for (i=0; i < msglen; i++)
+ DEBUGOUT_CONT_1 (" %02X", msg[i]);
+ DEBUGOUT_LF ();
+
+ rc = bulk_out (handle, msg, msglen);
+ if (rc)
+ return rc;
+ /* Note that we ignore the error code on purpose. */
+ bulk_in (handle, msg, sizeof msg, &msglen, RDR_to_PC_Parameters,
+ seqno, 5000, 0);
+
+ handle->t1_ns = 0;
+ handle->t1_nr = 0;
+
+ /* Send an S-Block with our maximun IFSD to the CCID. */
+ if (!handle->auto_ifsd)
+ {
+ tpdu = msg+10;
+ /* NAD: DAD=1, SAD=0 */
+ tpdu[0] = handle->nonnull_nad? ((1 << 4) | 0): 0;
+ tpdu[1] = (0xc0 | 0 | 1); /* S-block request: change IFSD */
+ tpdu[2] = 1;
+ tpdu[3] = handle->max_ifsd? handle->max_ifsd : 32;
+ tpdulen = 4;
+ edc = compute_edc (tpdu, tpdulen, use_crc);
+ if (use_crc)
+ tpdu[tpdulen++] = (edc >> 8);
+ tpdu[tpdulen++] = edc;
+
+ msg[0] = PC_to_RDR_XfrBlock;
+ msg[5] = 0; /* slot */
+ msg[6] = seqno = handle->seqno++;
+ msg[7] = 0;
+ msg[8] = 0; /* RFU */
+ msg[9] = 0; /* RFU */
+ set_msg_len (msg, tpdulen);
+ msglen = 10 + tpdulen;
+
+ DEBUGOUT ("sending");
+ for (i=0; i < msglen; i++)
+ DEBUGOUT_CONT_1 (" %02X", msg[i]);
+ DEBUGOUT_LF ();
+
+ if (debug_level > 1)
+ DEBUGOUT_3 ("T=1: put %c-block seq=%d%s\n",
+ ((msg[11] & 0xc0) == 0x80)? 'R' :
+ (msg[11] & 0x80)? 'S' : 'I',
+ ((msg[11] & 0x80)? !!(msg[11]& 0x10)
+ : !!(msg[11] & 0x40)),
+ (!(msg[11] & 0x80) && (msg[11] & 0x20)? " [more]":""));
+
+ rc = bulk_out (handle, msg, msglen);
+ if (rc)
+ return rc;
+
+
+ rc = bulk_in (handle, msg, sizeof msg, &msglen,
+ RDR_to_PC_DataBlock, seqno, 5000, 0);
+ if (rc)
+ return rc;
+
+ tpdu = msg + 10;
+ tpdulen = msglen - 10;
+
+ if (tpdulen < 4)
+ return CCID_DRIVER_ERR_ABORTED;
+
+ if (debug_level > 1)
+ DEBUGOUT_4 ("T=1: got %c-block seq=%d err=%d%s\n",
+ ((msg[11] & 0xc0) == 0x80)? 'R' :
+ (msg[11] & 0x80)? 'S' : 'I',
+ ((msg[11] & 0x80)? !!(msg[11]& 0x10)
+ : !!(msg[11] & 0x40)),
+ ((msg[11] & 0xc0) == 0x80)? (msg[11] & 0x0f) : 0,
+ (!(msg[11] & 0x80) && (msg[11] & 0x20)? " [more]":""));
+
+ if ((tpdu[1] & 0xe0) != 0xe0 || tpdu[2] != 1)
+ {
+ DEBUGOUT ("invalid response for S-block (Change-IFSD)\n");
+ return -1;
+ }
+ DEBUGOUT_1 ("IFSD has been set to %d\n", tpdu[3]);
+ }
+
+ return 0;
+}
+
+
+
+
+static unsigned int
+compute_edc (const unsigned char *data, size_t datalen, int use_crc)
+{
+ if (use_crc)
+ {
+ return 0x42; /* Not yet implemented. */
+ }
+ else
+ {
+ unsigned char crc = 0;
+
+ for (; datalen; datalen--)
+ crc ^= *data++;
+ return crc;
+ }
+}
+
+
+/* Helper for ccid_transceive used for APDU level exchanges. */
+static int
+ccid_transceive_apdu_level (ccid_driver_t handle,
+ const unsigned char *apdu_buf, size_t apdu_buflen,
+ unsigned char *resp, size_t maxresplen,
+ size_t *nresp)
+{
+ int rc;
+ unsigned char send_buffer[10+259], recv_buffer[10+259];
+ const unsigned char *apdu;
+ size_t apdulen;
+ unsigned char *msg;
+ size_t msglen;
+ unsigned char seqno;
+ int i;
+
+ msg = send_buffer;
+
+ apdu = apdu_buf;
+ apdulen = apdu_buflen;
+ assert (apdulen);
+
+ if (apdulen > 254)
+ return CCID_DRIVER_ERR_INV_VALUE; /* Invalid length. */
+
+ msg[0] = PC_to_RDR_XfrBlock;
+ msg[5] = 0; /* slot */
+ msg[6] = seqno = handle->seqno++;
+ msg[7] = 4; /* bBWI */
+ msg[8] = 0; /* RFU */
+ msg[9] = 0; /* RFU */
+ memcpy (msg+10, apdu, apdulen);
+ set_msg_len (msg, apdulen);
+ msglen = 10 + apdulen;
+
+ DEBUGOUT ("sending");
+ for (i=0; i < msglen; i++)
+ DEBUGOUT_CONT_1 (" %02X", msg[i]);
+ DEBUGOUT_LF ();
+
+ rc = bulk_out (handle, msg, msglen);
+ if (rc)
+ return rc;
+
+ msg = recv_buffer;
+ rc = bulk_in (handle, msg, sizeof recv_buffer, &msglen,
+ RDR_to_PC_DataBlock, seqno, 5000, 0);
+ if (rc)
+ return rc;
+
+ apdu = msg + 10;
+ apdulen = msglen - 10;
+
+ if (resp)
+ {
+ if (apdulen > maxresplen)
+ {
+ DEBUGOUT_2 ("provided buffer too short for received data "
+ "(%u/%u)\n",
+ (unsigned int)apdulen, (unsigned int)maxresplen);
+ return CCID_DRIVER_ERR_INV_VALUE;
+ }
+
+ memcpy (resp, apdu, apdulen);
+ *nresp = apdulen;
+ }
+
+ return 0;
+}
+
+
+
+/*
+ Protocol T=1 overview
+
+ Block Structure:
+ Prologue Field:
+ 1 byte Node Address (NAD)
+ 1 byte Protocol Control Byte (PCB)
+ 1 byte Length (LEN)
+ Information Field:
+ 0-254 byte APDU or Control Information (INF)
+ Epilogue Field:
+ 1 byte Error Detection Code (EDC)
+
+ NAD:
+ bit 7 unused
+ bit 4..6 Destination Node Address (DAD)
+ bit 3 unused
+ bit 2..0 Source Node Address (SAD)
+
+ If node adresses are not used, SAD and DAD should be set to 0 on
+ the first block sent to the card. If they are used they should
+ have different values (0 for one is okay); that first block sets up
+ the addresses of the nodes.
+
+ PCB:
+ Information Block (I-Block):
+ bit 7 0
+ bit 6 Sequence number (yep, that is modulo 2)
+ bit 5 Chaining flag
+ bit 4..0 reserved
+ Received-Ready Block (R-Block):
+ bit 7 1
+ bit 6 0
+ bit 5 0
+ bit 4 Sequence number
+ bit 3..0 0 = no error
+ 1 = EDC or parity error
+ 2 = other error
+ other values are reserved
+ Supervisory Block (S-Block):
+ bit 7 1
+ bit 6 1
+ bit 5 clear=request,set=response
+ bit 4..0 0 = resyncronisation request
+ 1 = information field size request
+ 2 = abort request
+ 3 = extension of BWT request
+ 4 = VPP error
+ other values are reserved
+
+*/
+
+int
+ccid_transceive (ccid_driver_t handle,
+ const unsigned char *apdu_buf, size_t apdu_buflen,
+ unsigned char *resp, size_t maxresplen, size_t *nresp)
+{
+ int rc;
+ unsigned char send_buffer[10+259], recv_buffer[10+259];
+ const unsigned char *apdu;
+ size_t apdulen;
+ unsigned char *msg, *tpdu, *p;
+ size_t msglen, tpdulen, last_tpdulen, n;
+ unsigned char seqno;
+ int i;
+ unsigned int edc;
+ int use_crc = 0;
+ size_t dummy_nresp;
+ int next_chunk = 1;
+ int sending = 1;
+ int retries = 0;
+
+ if (!nresp)
+ nresp = &dummy_nresp;
+ *nresp = 0;
+
+ /* Smarter readers allow to send APDUs directly; divert here. */
+ if (handle->apdu_level)
+ return ccid_transceive_apdu_level (handle, apdu_buf, apdu_buflen,
+ resp, maxresplen, nresp);
+
+ /* The other readers we support require sending TPDUs. */
+
+ tpdulen = 0; /* Avoid compiler warning about no initialization. */
+ msg = send_buffer;
+ for (;;)
+ {
+ if (next_chunk)
+ {
+ next_chunk = 0;
+
+ apdu = apdu_buf;
+ apdulen = apdu_buflen;
+ assert (apdulen);
+
+ /* Construct an I-Block. */
+ if (apdulen > 254)
+ return CCID_DRIVER_ERR_INV_VALUE; /* Invalid length. */
+
+ tpdu = msg+10;
+ /* NAD: DAD=1, SAD=0 */
+ tpdu[0] = handle->nonnull_nad? ((1 << 4) | 0): 0;
+ tpdu[1] = ((handle->t1_ns & 1) << 6); /* I-block */
+ if (apdulen > 128 /* fixme: replace by ifsc */)
+ {
+ apdulen = 128;
+ apdu_buf += 128;
+ apdu_buflen -= 128;
+ tpdu[1] |= (1 << 5); /* Set more bit. */
+ }
+ tpdu[2] = apdulen;
+ memcpy (tpdu+3, apdu, apdulen);
+ tpdulen = 3 + apdulen;
+ edc = compute_edc (tpdu, tpdulen, use_crc);
+ if (use_crc)
+ tpdu[tpdulen++] = (edc >> 8);
+ tpdu[tpdulen++] = edc;
+ }
+
+ msg[0] = PC_to_RDR_XfrBlock;
+ msg[5] = 0; /* slot */
+ msg[6] = seqno = handle->seqno++;
+ msg[7] = 4; /* bBWI */
+ msg[8] = 0; /* RFU */
+ msg[9] = 0; /* RFU */
+ set_msg_len (msg, tpdulen);
+ msglen = 10 + tpdulen;
+ last_tpdulen = tpdulen;
+
+ DEBUGOUT ("sending");
+ for (i=0; i < msglen; i++)
+ DEBUGOUT_CONT_1 (" %02X", msg[i]);
+ DEBUGOUT_LF ();
+
+ if (debug_level > 1)
+ DEBUGOUT_3 ("T=1: put %c-block seq=%d%s\n",
+ ((msg[11] & 0xc0) == 0x80)? 'R' :
+ (msg[11] & 0x80)? 'S' : 'I',
+ ((msg[11] & 0x80)? !!(msg[11]& 0x10)
+ : !!(msg[11] & 0x40)),
+ (!(msg[11] & 0x80) && (msg[11] & 0x20)? " [more]":""));
+
+ rc = bulk_out (handle, msg, msglen);
+ if (rc)
+ return rc;
+
+ msg = recv_buffer;
+ rc = bulk_in (handle, msg, sizeof recv_buffer, &msglen,
+ RDR_to_PC_DataBlock, seqno, 5000, 0);
+ if (rc)
+ return rc;
+
+ tpdu = msg + 10;
+ tpdulen = msglen - 10;
+
+ if (tpdulen < 4)
+ {
+ usb_clear_halt (handle->idev, handle->ep_bulk_in);
+ return CCID_DRIVER_ERR_ABORTED;
+ }
+
+ if (debug_level > 1)
+ DEBUGOUT_4 ("T=1: got %c-block seq=%d err=%d%s\n",
+ ((msg[11] & 0xc0) == 0x80)? 'R' :
+ (msg[11] & 0x80)? 'S' : 'I',
+ ((msg[11] & 0x80)? !!(msg[11]& 0x10) : !!(msg[11] & 0x40)),
+ ((msg[11] & 0xc0) == 0x80)? (msg[11] & 0x0f) : 0,
+ (!(msg[11] & 0x80) && (msg[11] & 0x20)? " [more]":""));
+
+ if (!(tpdu[1] & 0x80))
+ { /* This is an I-block. */
+ retries = 0;
+ if (sending)
+ { /* last block sent was successful. */
+ handle->t1_ns ^= 1;
+ sending = 0;
+ }
+
+ if (!!(tpdu[1] & 0x40) != handle->t1_nr)
+ { /* Reponse does not match our sequence number. */
+ msg = send_buffer;
+ tpdu = msg+10;
+ /* NAD: DAD=1, SAD=0 */
+ tpdu[0] = handle->nonnull_nad? ((1 << 4) | 0): 0;
+ tpdu[1] = (0x80 | (handle->t1_nr & 1) << 4 | 2); /* R-block */
+ tpdu[2] = 0;
+ tpdulen = 3;
+ edc = compute_edc (tpdu, tpdulen, use_crc);
+ if (use_crc)
+ tpdu[tpdulen++] = (edc >> 8);
+ tpdu[tpdulen++] = edc;
+
+ continue;
+ }
+
+ handle->t1_nr ^= 1;
+
+ p = tpdu + 3; /* Skip the prologue field. */
+ n = tpdulen - 3 - 1; /* Strip the epilogue field. */
+ /* fixme: verify the checksum. */
+ if (resp)
+ {
+ if (n > maxresplen)
+ {
+ DEBUGOUT_2 ("provided buffer too short for received data "
+ "(%u/%u)\n",
+ (unsigned int)n, (unsigned int)maxresplen);
+ return CCID_DRIVER_ERR_INV_VALUE;
+ }
+
+ memcpy (resp, p, n);
+ resp += n;
+ *nresp += n;
+ maxresplen -= n;
+ }
+
+ if (!(tpdu[1] & 0x20))
+ return 0; /* No chaining requested - ready. */
+
+ msg = send_buffer;
+ tpdu = msg+10;
+ /* NAD: DAD=1, SAD=0 */
+ tpdu[0] = handle->nonnull_nad? ((1 << 4) | 0): 0;
+ tpdu[1] = (0x80 | (handle->t1_nr & 1) << 4); /* R-block */
+ tpdu[2] = 0;
+ tpdulen = 3;
+ edc = compute_edc (tpdu, tpdulen, use_crc);
+ if (use_crc)
+ tpdu[tpdulen++] = (edc >> 8);
+ tpdu[tpdulen++] = edc;
+ }
+ else if ((tpdu[1] & 0xc0) == 0x80)
+ { /* This is a R-block. */
+ if ( (tpdu[1] & 0x0f))
+ { /* Error: repeat last block */
+ if (++retries > 3)
+ {
+ DEBUGOUT ("3 failed retries\n");
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+ msg = send_buffer;
+ tpdulen = last_tpdulen;
+ }
+ else if (sending && !!(tpdu[1] & 0x10) == handle->t1_ns)
+ { /* Response does not match our sequence number. */
+ DEBUGOUT ("R-block with wrong seqno received on more bit\n");
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+ else if (sending)
+ { /* Send next chunk. */
+ retries = 0;
+ msg = send_buffer;
+ next_chunk = 1;
+ handle->t1_ns ^= 1;
+ }
+ else
+ {
+ DEBUGOUT ("unexpected ACK R-block received\n");
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+ }
+ else
+ { /* This is a S-block. */
+ retries = 0;
+ DEBUGOUT_2 ("T=1 S-block %s received cmd=%d\n",
+ (tpdu[1] & 0x20)? "response": "request",
+ (tpdu[1] & 0x1f));
+ if ( !(tpdu[1] & 0x20) && (tpdu[1] & 0x1f) == 3 && tpdu[2])
+ { /* Wait time extension request. */
+ unsigned char bwi = tpdu[3];
+ msg = send_buffer;
+ tpdu = msg+10;
+ /* NAD: DAD=1, SAD=0 */
+ tpdu[0] = handle->nonnull_nad? ((1 << 4) | 0): 0;
+ tpdu[1] = (0xc0 | 0x20 | 3); /* S-block response */
+ tpdu[2] = 1;
+ tpdu[3] = bwi;
+ tpdulen = 4;
+ edc = compute_edc (tpdu, tpdulen, use_crc);
+ if (use_crc)
+ tpdu[tpdulen++] = (edc >> 8);
+ tpdu[tpdulen++] = edc;
+ DEBUGOUT_1 ("T=1 waittime extension of bwi=%d\n", bwi);
+ }
+ else
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+ } /* end T=1 protocol loop. */
+
+ return 0;
+}
+
+
+/* Send the CCID Secure command to the reader. APDU_BUF should
+ contain the APDU template. PIN_MODE defines how the pin gets
+ formatted:
+
+ 1 := The PIN is ASCII encoded and of variable length. The
+ length of the PIN entered will be put into Lc by the reader.
+ The APDU should me made up of 4 bytes without Lc.
+
+ PINLEN_MIN and PINLEN_MAX define the limits for the pin length. 0
+ may be used t enable reasonable defaults. PIN_PADLEN should be 0.
+
+ When called with RESP and NRESP set to NULL, the function will
+ merely check whether the reader supports the secure command for the
+ given APDU and PIN_MODE. */
+int
+ccid_transceive_secure (ccid_driver_t handle,
+ const unsigned char *apdu_buf, size_t apdu_buflen,
+ int pin_mode, int pinlen_min, int pinlen_max,
+ int pin_padlen,
+ unsigned char *resp, size_t maxresplen, size_t *nresp)
+{
+ int rc;
+ unsigned char send_buffer[10+259], recv_buffer[10+259];
+ unsigned char *msg, *tpdu, *p;
+ size_t msglen, tpdulen, n;
+ unsigned char seqno;
+ int i;
+ size_t dummy_nresp;
+ int testmode;
+
+ testmode = !resp && !nresp;
+
+ if (!nresp)
+ nresp = &dummy_nresp;
+ *nresp = 0;
+
+ if (apdu_buflen >= 4 && apdu_buf[1] == 0x20 && (handle->has_pinpad & 1))
+ ;
+ else if (apdu_buflen >= 4 && apdu_buf[1] == 0x24 && (handle->has_pinpad & 2))
+ return CCID_DRIVER_ERR_NOT_SUPPORTED; /* Not yet by our code. */
+ else
+ return CCID_DRIVER_ERR_NO_KEYPAD;
+
+ if (pin_mode != 1)
+ return CCID_DRIVER_ERR_NOT_SUPPORTED;
+
+ if (pin_padlen != 0)
+ return CCID_DRIVER_ERR_NOT_SUPPORTED;
+
+ if (!pinlen_min)
+ pinlen_min = 1;
+ if (!pinlen_max)
+ pinlen_max = 25;
+
+ /* Note that the 25 is the maximum value the SPR532 allows. */
+ if (pinlen_min < 1 || pinlen_min > 25
+ || pinlen_max < 1 || pinlen_max > 25
+ || pinlen_min > pinlen_max)
+ return CCID_DRIVER_ERR_INV_VALUE;
+
+ /* We have only tested this with an SCM reader so better don't risk
+ anything and do not allow the use with other readers. */
+ if (handle->id_vendor != VENDOR_SCM)
+ return CCID_DRIVER_ERR_NOT_SUPPORTED;
+
+ if (testmode)
+ return 0; /* Success */
+
+ msg = send_buffer;
+ if (handle->id_vendor == VENDOR_SCM)
+ {
+ DEBUGOUT ("sending escape sequence to switch to a case 1 APDU\n");
+ rc = send_escape_cmd (handle, (const unsigned char*)"\x80\x02\x00", 3,
+ NULL, 0, NULL);
+ if (rc)
+ return rc;
+ }
+
+ msg[0] = PC_to_RDR_Secure;
+ msg[5] = 0; /* slot */
+ msg[6] = seqno = handle->seqno++;
+ msg[7] = 4; /* bBWI */
+ msg[8] = 0; /* RFU */
+ msg[9] = 0; /* RFU */
+ msg[10] = 0; /* Perform PIN verification. */
+ msg[11] = 0; /* Timeout in seconds. */
+ msg[12] = 0x82; /* bmFormatString: Byte, pos=0, left, ASCII. */
+ if (handle->id_vendor == VENDOR_SCM)
+ {
+ /* For the SPR532 the next 2 bytes need to be zero. We do this
+ for all SCM product. Kudos to Martin Paljak for this
+ hint. */
+ msg[13] = msg[14] = 0;
+ }
+ else
+ {
+ msg[13] = 0x00; /* bmPINBlockString:
+ 0 bits of pin length to insert.
+ 0 bytes of PIN block size. */
+ msg[14] = 0x00; /* bmPINLengthFormat:
+ Units are bytes, position is 0. */
+ }
+ msg[15] = pinlen_min; /* wPINMaxExtraDigit-Minimum. */
+ msg[16] = pinlen_max; /* wPINMaxExtraDigit-Maximum. */
+ msg[17] = 0x02; /* bEntryValidationCondition:
+ Validation key pressed */
+ if (pinlen_min && pinlen_max && pinlen_min == pinlen_max)
+ msg[17] |= 0x01; /* Max size reached. */
+ msg[18] = 0xff; /* bNumberMessage: Default. */
+ msg[19] = 0x04; /* wLangId-High. */
+ msg[20] = 0x09; /* wLangId-Low: English FIXME: use the first entry. */
+ msg[21] = 0; /* bMsgIndex. */
+ /* bTeoProlog follows: */
+ msg[22] = handle->nonnull_nad? ((1 << 4) | 0): 0;
+ msg[23] = ((handle->t1_ns & 1) << 6); /* I-block */
+ msg[24] = 4; /* apdulen. */
+ /* APDU follows: */
+ msg[25] = apdu_buf[0]; /* CLA */
+ msg[26] = apdu_buf[1]; /* INS */
+ msg[27] = apdu_buf[2]; /* P1 */
+ msg[28] = apdu_buf[3]; /* P2 */
+ msglen = 29;
+ set_msg_len (msg, msglen - 10);
+
+ DEBUGOUT ("sending");
+ for (i=0; i < msglen; i++)
+ DEBUGOUT_CONT_1 (" %02X", msg[i]);
+ DEBUGOUT_LF ();
+
+ rc = bulk_out (handle, msg, msglen);
+ if (rc)
+ return rc;
+
+ msg = recv_buffer;
+ rc = bulk_in (handle, msg, sizeof recv_buffer, &msglen,
+ RDR_to_PC_DataBlock, seqno, 5000, 0);
+ if (rc)
+ return rc;
+
+ tpdu = msg + 10;
+ tpdulen = msglen - 10;
+
+ if (tpdulen < 4)
+ {
+ usb_clear_halt (handle->idev, handle->ep_bulk_in);
+ return CCID_DRIVER_ERR_ABORTED;
+ }
+ if (debug_level > 1)
+ DEBUGOUT_4 ("T=1: got %c-block seq=%d err=%d%s\n",
+ ((msg[11] & 0xc0) == 0x80)? 'R' :
+ (msg[11] & 0x80)? 'S' : 'I',
+ ((msg[11] & 0x80)? !!(msg[11]& 0x10) : !!(msg[11] & 0x40)),
+ ((msg[11] & 0xc0) == 0x80)? (msg[11] & 0x0f) : 0,
+ (!(msg[11] & 0x80) && (msg[11] & 0x20)? " [more]":""));
+
+ if (!(tpdu[1] & 0x80))
+ { /* This is an I-block. */
+ /* Last block sent was successful. */
+ handle->t1_ns ^= 1;
+
+ if (!!(tpdu[1] & 0x40) != handle->t1_nr)
+ { /* Reponse does not match our sequence number. */
+ DEBUGOUT ("I-block with wrong seqno received\n");
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+
+ handle->t1_nr ^= 1;
+
+ p = tpdu + 3; /* Skip the prologue field. */
+ n = tpdulen - 3 - 1; /* Strip the epilogue field. */
+ /* fixme: verify the checksum. */
+ if (resp)
+ {
+ if (n > maxresplen)
+ {
+ DEBUGOUT_2 ("provided buffer too short for received data "
+ "(%u/%u)\n",
+ (unsigned int)n, (unsigned int)maxresplen);
+ return CCID_DRIVER_ERR_INV_VALUE;
+ }
+
+ memcpy (resp, p, n);
+ resp += n;
+ *nresp += n;
+ maxresplen -= n;
+ }
+
+ if (!(tpdu[1] & 0x20))
+ return 0; /* No chaining requested - ready. */
+
+ DEBUGOUT ("chaining requested but not supported for Secure operation\n");
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+ else if ((tpdu[1] & 0xc0) == 0x80)
+ { /* This is a R-block. */
+ if ( (tpdu[1] & 0x0f))
+ { /* Error: repeat last block */
+ DEBUGOUT ("No retries supported for Secure operation\n");
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+ else if (!!(tpdu[1] & 0x10) == handle->t1_ns)
+ { /* Reponse does not match our sequence number. */
+ DEBUGOUT ("R-block with wrong seqno received on more bit\n");
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+ else
+ { /* Send next chunk. */
+ DEBUGOUT ("chaining not supported on Secure operation\n");
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+ }
+ else
+ { /* This is a S-block. */
+ DEBUGOUT_2 ("T=1 S-block %s received cmd=%d for Secure operation\n",
+ (tpdu[1] & 0x20)? "response": "request",
+ (tpdu[1] & 0x1f));
+ return CCID_DRIVER_ERR_CARD_IO_ERROR;
+ }
+
+ return 0;
+}
+
+
+
+
+#ifdef TEST
+
+
+static void
+print_error (int err)
+{
+ const char *p;
+ char buf[50];
+
+ switch (err)
+ {
+ case 0: p = "success";
+ case CCID_DRIVER_ERR_OUT_OF_CORE: p = "out of core"; break;
+ case CCID_DRIVER_ERR_INV_VALUE: p = "invalid value"; break;
+ case CCID_DRIVER_ERR_NO_DRIVER: p = "no driver"; break;
+ case CCID_DRIVER_ERR_NOT_SUPPORTED: p = "not supported"; break;
+ case CCID_DRIVER_ERR_LOCKING_FAILED: p = "locking failed"; break;
+ case CCID_DRIVER_ERR_BUSY: p = "busy"; break;
+ case CCID_DRIVER_ERR_NO_CARD: p = "no card"; break;
+ case CCID_DRIVER_ERR_CARD_INACTIVE: p = "card inactive"; break;
+ case CCID_DRIVER_ERR_CARD_IO_ERROR: p = "card I/O error"; break;
+ case CCID_DRIVER_ERR_GENERAL_ERROR: p = "general error"; break;
+ case CCID_DRIVER_ERR_NO_READER: p = "no reader"; break;
+ case CCID_DRIVER_ERR_ABORTED: p = "aborted"; break;
+ default: sprintf (buf, "0x%05x", err); p = buf; break;
+ }
+ fprintf (stderr, "operation failed: %s\n", p);
+}
+
+static void
+print_data (const unsigned char *data, size_t length)
+{
+ if (length >= 2)
+ {
+ fprintf (stderr, "operation status: %02X%02X\n",
+ data[length-2], data[length-1]);
+ length -= 2;
+ }
+ if (length)
+ {
+ fputs (" returned data:", stderr);
+ for (; length; length--, data++)
+ fprintf (stderr, " %02X", *data);
+ putc ('\n', stderr);
+ }
+}
+
+static void
+print_result (int rc, const unsigned char *data, size_t length)
+{
+ if (rc)
+ print_error (rc);
+ else if (data)
+ print_data (data, length);
+}
+
+int
+main (int argc, char **argv)
+{
+ int rc;
+ ccid_driver_t ccid;
+ unsigned int slotstat;
+ unsigned char result[512];
+ size_t resultlen;
+ int no_pinpad = 0;
+ int verify_123456 = 0;
+ int did_verify = 0;
+ int no_poll = 0;
+
+ if (argc)
+ {
+ argc--;
+ argv++;
+ }
+
+ while (argc)
+ {
+ if ( !strcmp (*argv, "--list"))
+ {
+ char *p;
+ p = ccid_get_reader_list ();
+ if (!p)
+ return 1;
+ fputs (p, stderr);
+ free (p);
+ return 0;
+ }
+ else if ( !strcmp (*argv, "--debug"))
+ {
+ ccid_set_debug_level (1);
+ argc--; argv++;
+ }
+ else if ( !strcmp (*argv, "--no-poll"))
+ {
+ no_poll = 1;
+ argc--; argv++;
+ }
+ else if ( !strcmp (*argv, "--no-pinpad"))
+ {
+ no_pinpad = 1;
+ argc--; argv++;
+ }
+ else if ( !strcmp (*argv, "--verify-123456"))
+ {
+ verify_123456 = 1;
+ argc--; argv++;
+ }
+ else
+ break;
+ }
+
+ rc = ccid_open_reader (&ccid, argc? *argv:NULL);
+ if (rc)
+ return 1;
+
+ if (!no_poll)
+ ccid_poll (ccid);
+ fputs ("getting ATR ...\n", stderr);
+ rc = ccid_get_atr (ccid, NULL, 0, NULL);
+ if (rc)
+ {
+ print_error (rc);
+ return 1;
+ }
+
+ if (!no_poll)
+ ccid_poll (ccid);
+ fputs ("getting slot status ...\n", stderr);
+ rc = ccid_slot_status (ccid, &slotstat);
+ if (rc)
+ {
+ print_error (rc);
+ return 1;
+ }
+
+ if (!no_poll)
+ ccid_poll (ccid);
+
+ fputs ("selecting application OpenPGP ....\n", stderr);
+ {
+ static unsigned char apdu[] = {
+ 0, 0xA4, 4, 0, 6, 0xD2, 0x76, 0x00, 0x01, 0x24, 0x01};
+ rc = ccid_transceive (ccid,
+ apdu, sizeof apdu,
+ result, sizeof result, &resultlen);
+ print_result (rc, result, resultlen);
+ }
+
+
+ if (!no_poll)
+ ccid_poll (ccid);
+
+ fputs ("getting OpenPGP DO 0x65 ....\n", stderr);
+ {
+ static unsigned char apdu[] = { 0, 0xCA, 0, 0x65, 254 };
+ rc = ccid_transceive (ccid, apdu, sizeof apdu,
+ result, sizeof result, &resultlen);
+ print_result (rc, result, resultlen);
+ }
+
+ if (!no_pinpad)
+ {
+ }
+
+ if (!no_pinpad)
+ {
+ static unsigned char apdu[] = { 0, 0x20, 0, 0x81 };
+
+
+ if (ccid_transceive_secure (ccid,
+ apdu, sizeof apdu,
+ 1, 0, 0, 0,
+ NULL, 0, NULL))
+ fputs ("can't verify using a PIN-Pad reader\n", stderr);
+ else
+ {
+ fputs ("verifying CHV1 using the PINPad ....\n", stderr);
+
+ rc = ccid_transceive_secure (ccid,
+ apdu, sizeof apdu,
+ 1, 0, 0, 0,
+ result, sizeof result, &resultlen);
+ print_result (rc, result, resultlen);
+ did_verify = 1;
+ }
+ }
+
+ if (verify_123456 && !did_verify)
+ {
+ fputs ("verifying that CHV1 is 123456....\n", stderr);
+ {
+ static unsigned char apdu[] = {0, 0x20, 0, 0x81,
+ 6, '1','2','3','4','5','6'};
+ rc = ccid_transceive (ccid, apdu, sizeof apdu,
+ result, sizeof result, &resultlen);
+ print_result (rc, result, resultlen);
+ }
+ }
+
+ if (!rc)
+ {
+ fputs ("getting OpenPGP DO 0x5E ....\n", stderr);
+ {
+ static unsigned char apdu[] = { 0, 0xCA, 0, 0x5E, 254 };
+ rc = ccid_transceive (ccid, apdu, sizeof apdu,
+ result, sizeof result, &resultlen);
+ print_result (rc, result, resultlen);
+ }
+ }
+
+ ccid_close_reader (ccid);
+
+ return 0;
+}
+
+/*
+ * Local Variables:
+ * compile-command: "gcc -DTEST -Wall -I/usr/local/include -lusb -g ccid-driver.c"
+ * End:
+ */
+#endif /*TEST*/
+#endif /*HAVE_LIBUSB*/
diff --git a/src/ccid/ccid-driver.h b/src/ccid/ccid-driver.h
new file mode 100644
index 0000000..ae6b7fd
--- /dev/null
+++ b/src/ccid/ccid-driver.h
@@ -0,0 +1,108 @@
+/* ccid-driver.c - USB ChipCardInterfaceDevices driver
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This file is part of GnuPG.
+ *
+ * GnuPG is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * GnuPG is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ *
+ * ALTERNATIVELY, this file may be distributed under the terms of the
+ * following license, in which case the provisions of this license are
+ * required INSTEAD OF the GNU General Public License. If you wish to
+ * allow use of your version of this file only under the terms of the
+ * GNU General Public License, and not to allow others to use your
+ * version of this file under the terms of the following license,
+ * indicate your decision by deleting this paragraph and the license
+ * below.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, and the entire permission notice in its entirety,
+ * including the disclaimer of warranties.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote
+ * products derived from this software without specific prior
+ * written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $Id: ccid-driver.h 3887 2005-09-09 11:18:08Z wk $
+ */
+
+#ifndef CCID_DRIVER_H
+#define CCID_DRIVER_H
+
+/* The CID driver returns the same error codes as the status words
+ used by GnuPG's apdu.h. For ease of maintenance they should always
+ match. */
+#define CCID_DRIVER_ERR_OUT_OF_CORE 0x10001
+#define CCID_DRIVER_ERR_INV_VALUE 0x10002
+#define CCID_DRIVER_ERR_INCOMPLETE_CARD_RESPONSE = 0x10003
+#define CCID_DRIVER_ERR_NO_DRIVER 0x10004
+#define CCID_DRIVER_ERR_NOT_SUPPORTED 0x10005
+#define CCID_DRIVER_ERR_LOCKING_FAILED 0x10006
+#define CCID_DRIVER_ERR_BUSY 0x10007
+#define CCID_DRIVER_ERR_NO_CARD 0x10008
+#define CCID_DRIVER_ERR_CARD_INACTIVE 0x10009
+#define CCID_DRIVER_ERR_CARD_IO_ERROR 0x1000a
+#define CCID_DRIVER_ERR_GENERAL_ERROR 0x1000b
+#define CCID_DRIVER_ERR_NO_READER 0x1000c
+#define CCID_DRIVER_ERR_ABORTED 0x1000d
+#define CCID_DRIVER_ERR_NO_KEYPAD 0x1000e
+
+struct ccid_driver_s;
+typedef struct ccid_driver_s *ccid_driver_t;
+
+int ccid_set_debug_level (int level);
+char *ccid_get_reader_list (void);
+int ccid_open_reader (ccid_driver_t *handle, const char *readerid);
+int ccid_shutdown_reader (ccid_driver_t handle);
+int ccid_close_reader (ccid_driver_t handle);
+int ccid_get_atr (ccid_driver_t handle,
+ unsigned char *atr, size_t maxatrlen, size_t *atrlen);
+int ccid_slot_status (ccid_driver_t handle, int *statusbits);
+int ccid_transceive (ccid_driver_t handle,
+ const unsigned char *apdu, size_t apdulen,
+ unsigned char *resp, size_t maxresplen, size_t *nresp);
+int ccid_transceive_secure (ccid_driver_t handle,
+ const unsigned char *apdu, size_t apdulen,
+ int pin_mode,
+ int pinlen_min, int pinlen_max, int pin_padlen,
+ unsigned char *resp, size_t maxresplen, size_t *nresp);
+int ccid_transceive_escape (ccid_driver_t handle,
+ const unsigned char *data, size_t datalen,
+ unsigned char *resp, size_t maxresplen,
+ size_t *nresp);
+
+
+
+#endif /*CCID_DRIVER_H*/
+
+
+
personal git repositories of Harald Welte. Your mileage may vary