- Add OpenPICC register definition (and USB command handling)

- Add automatic generation of include/compile.h with svn revision and compiletime
- Add openpcd_compile_version structure to obtain version via USB
- Move LED commands into new CMD_CLS_GENERIC family
- Update TODO
- Add support for large (2048 byte) request contexts in addition to 64byte
- Shrink req_ctx size by collapsing rx and tx buffer into one
- move definition of DFU_API_LOCATION to header file
- Implement large req_ctx aware USB transmit / refill routines
- Implement TX refilling for IRQ Endpoint
- Print version information at startup time
- move some generic req_ctx processing into usb_handler.c
- Some further work on DFU (still not finished)
- Only use '-Os' for DFU, use '-O2' for application code


git-svn-id: https://svn.openpcd.org:2342/trunk@208 6dc7ffe9-61d6-0310-9af1-9938baff3ed1

1 files changed, 4 insertions, 5 deletions

diff --git a/firmware/TODO b/firmware/TODO
index c63fb89..1d19223 100644
--- a/firmware/TODO
+++ b/firmware/TODO
@@ -1,19 +1,18 @@
 SPI:
 - use PDC DMA for SPI transfers
-- use real SPI clock divisor (4.8MHz) rather than current 320kHz clock
 
 RC632:
 - Fix locking between 'atomic' ops like set/clear bit and RC632 IRQ
 - Implement VFIFO handling
 
 USB:
-- don't busy-wait for EP2/EP3 transfers but rather use TX completion IRQ
 - Implement VFIFO handling
-- Add DFU descriptor to host
 
 DFU:
-- implement DFU protocol for bootloader flash partition
-- add capability to copy and execute DFU from RAM
+- fix DFU download (usb control write / zlp at end)
+- add capability to flash DFU itself
+- add a header to the application program, checksum and size
+- checksum application image.  If wrong, enter DFU recovery mode
 - Get rid of lots of constant values and replace them by proper defines
 
 Generic: