simtrace: Add heartbeat message to debug console

3 files changed, 20 insertions, 0 deletions

diff --git a/firmware/src/simtrace/iso7816_uart.c b/firmware/src/simtrace/iso7816_uart.c
index 52522c0..611ccfb 100644
--- a/firmware/src/simtrace/iso7816_uart.c
+++ b/firmware/src/simtrace/iso7816_uart.c
@@ -125,6 +125,14 @@ static const u_int8_t di_table[] = {
 	12, 20, 2, 4, 8, 16, 32, 64,
 };
 
+void iso_uart_report_overrun(void)
+{
+	static unsigned lastOverrun = 0;
+	if (isoh.stats.overrun != lastOverrun) {
+		DEBUGPCR("UART overrun: %u", lastOverrun = isoh.stats.overrun);
+	}
+}
+
 void iso_uart_stats_dump(void)
 {
 	DEBUGPCRF("no_rctx: %u, rctx_sent: %u, rst: %u, pps: %u, bytes: %u, "
@@ -675,6 +683,8 @@ void iso_uart_init(void)
 {
 	DEBUGPCR("USART Initializing");
 
+	memset(&isoh, 0, sizeof(isoh));
+
 	refill_rctx(&isoh);
 
 	/* make sure we get clock from the power management controller */
diff --git a/firmware/src/simtrace/iso7816_uart.h b/firmware/src/simtrace/iso7816_uart.h
index beb0b23..070d92a 100644
--- a/firmware/src/simtrace/iso7816_uart.h
+++ b/firmware/src/simtrace/iso7816_uart.h
@@ -6,3 +6,4 @@ void iso_uart_rst(unsigned int state);
 void iso_uart_rx_mode(void);
 void iso_uart_clk_master(unsigned int master);
 void iso_uart_init(void);
+void iso_uart_report_overrun(void);
diff --git a/firmware/src/simtrace/main_simtrace.c b/firmware/src/simtrace/main_simtrace.c
index 6f82d96..ca4e646 100644
--- a/firmware/src/simtrace/main_simtrace.c
+++ b/firmware/src/simtrace/main_simtrace.c
@@ -218,6 +218,8 @@ int _main_dbgu(char key)
 
 void _main_func(void)
 {
+	static unsigned loopLow = 0, loopHigh = 0;
+
 	/* first we try to get rid of pending to-be-sent stuff */
 	usb_out_process();
 
@@ -225,4 +227,11 @@ void _main_func(void)
 	usb_in_process();
 
 	udp_unthrottle();
+
+	if ((loopLow & 0xFFFF) == 0) {
+		DEBUGPCR("Heart beat %08X", loopHigh++);
+	}
+	loopLow++;
+
+	iso_uart_report_overrun();
 }