summaryrefslogtreecommitdiff
path: root/firmware/src/os/dfu.c
diff options
context:
space:
mode:
Diffstat (limited to 'firmware/src/os/dfu.c')
-rw-r--r--firmware/src/os/dfu.c681
1 files changed, 0 insertions, 681 deletions
diff --git a/firmware/src/os/dfu.c b/firmware/src/os/dfu.c
deleted file mode 100644
index f2bc0ca..0000000
--- a/firmware/src/os/dfu.c
+++ /dev/null
@@ -1,681 +0,0 @@
-/* USB Device Firmware Update Implementation for OpenPCD
- * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de>
- *
- * This ought to be compliant to the USB DFU Spec 1.0 as available from
- * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf
- *
- */
-
-#include <errno.h>
-#include <usb_ch9.h>
-#include <usb_dfu.h>
-#include <lib_AT91SAM7.h>
-
-#include <os/dfu.h>
-#include <os/pcd_enumerate.h>
-#include <os/req_ctx.h>
-#include "../openpcd.h"
-
-/* If debug is enabled, we need to access debug functions from flash
- * and therefore have to omit flashing */
-//#define DEBUG_DFU
-
-#ifdef DEBUG_DFU
-#define DEBUGE DEBUGP
-#define DEBUGI DEBUGP
-#else
-#define DEBUGE(x, args ...) do { } while (0)
-#define DEBUGI(x, args ...) do { } while (0)
-#endif
-
-
-void __dfufunc udp_init(void)
-{
- /* Set the PLL USB Divider */
- AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1;
-
- /* Enables the 48MHz USB clock UDPCK and System Peripheral USB Clock */
- AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UDP;
- AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_UDP);
-
- /* Enable UDP PullUp (USB_DP_PUP) : enable & Clear of the corresponding PIO
- * Set in PIO mode and Configure in Output */
- AT91F_PIO_CfgOutput(AT91C_BASE_PIOA, OPENPCD_PIO_UDP_PUP);
-}
-
-/* Send Data through the control endpoint */
-static void __dfufunc udp_ep0_send_data(const char *pData, u_int32_t length)
-{
- AT91PS_UDP pUdp = AT91C_BASE_UDP;
- u_int32_t cpt = 0;
- AT91_REG csr;
-
- DEBUGE("send_data: %u bytes ", length);
-
- do {
- cpt = MIN(length, 8);
- length -= cpt;
-
- while (cpt--)
- pUdp->UDP_FDR[0] = *pData++;
-
- if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) {
- pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
- while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) ;
- }
-
- pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;
- do {
- csr = pUdp->UDP_CSR[0];
-
- /* Data IN stage has been stopped by a status OUT */
- if (csr & AT91C_UDP_RX_DATA_BK0) {
- pUdp->UDP_CSR[0] &= ~(AT91C_UDP_RX_DATA_BK0);
- DEBUGE("stopped by status out ");
- return;
- }
- } while (!(csr & AT91C_UDP_TXCOMP));
-
- } while (length);
-
- if (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) {
- pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
- while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) ;
- }
-}
-
-/* Send zero length packet through the control endpoint */
-static void __dfufunc udp_ep0_send_zlp(void)
-{
- AT91PS_UDP pUdp = AT91C_BASE_UDP;
- pUdp->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;
- while (!(pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP)) ;
- pUdp->UDP_CSR[0] &= ~(AT91C_UDP_TXCOMP);
- while (pUdp->UDP_CSR[0] & AT91C_UDP_TXCOMP) ;
-}
-
-/* Stall the control endpoint */
-static void __dfufunc udp_ep0_send_stall(void)
-{
- AT91PS_UDP pUdp = AT91C_BASE_UDP;
- pUdp->UDP_CSR[0] |= AT91C_UDP_FORCESTALL;
- while (!(pUdp->UDP_CSR[0] & AT91C_UDP_ISOERROR)) ;
- pUdp->UDP_CSR[0] &= ~(AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR);
- while (pUdp->UDP_CSR[0] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR)) ;
-}
-
-
-static u_int8_t status;
-static u_int8_t *ptr;
-static u_int8_t dfu_state;
-
-static int __dfufunc handle_dnload(u_int16_t val, u_int16_t len)
-{
- volatile u_int32_t *p = (volatile u_int32_t *)ptr;
-
- DEBUGE("download ");
-
- if (len > AT91C_IFLASH_PAGE_SIZE) {
- /* Too big */
- dfu_state = DFU_STATE_dfuERROR;
- status = DFU_STATUS_errADDRESS;
- udp_ep0_send_stall();
- return -EINVAL;
- }
- if (len & 0x3) {
- dfu_state = DFU_STATE_dfuERROR;
- status = DFU_STATUS_errADDRESS;
- udp_ep0_send_stall();
- return -EINVAL;
- }
- if (len == 0) {
- dfu_state = DFU_STATE_dfuMANIFEST_SYNC;
- return 0;
- }
-#if 0
- for (i = 0; i < len/4; i++)
- p[i] =
-#endif
-
- /* FIXME: get data packet from FIFO, (erase+)write flash */
-#ifndef DEBUG_DFU
-
-#endif
-
- return 0;
-}
-
-static __dfufunc int handle_upload(u_int16_t val, u_int16_t len)
-{
- DEBUGE("upload ");
- if (len > AT91C_IFLASH_PAGE_SIZE
- || ptr > AT91C_IFLASH_SIZE) {
- /* Too big */
- dfu_state = DFU_STATE_dfuERROR;
- status = DFU_STATUS_errADDRESS;
- udp_ep0_send_stall();
- return -EINVAL;
- }
-
- if (ptr + len > AT91C_IFLASH_SIZE)
- len = AT91C_IFLASH_SIZE - (u_int32_t) ptr;
-
- udp_ep0_send_data((char *)ptr, len);
- ptr+= len;
-
- return len;
-}
-
-static __dfufunc void handle_getstatus(void)
-{
- struct dfu_status dstat;
-
- DEBUGE("getstatus ");
-
- /* send status response */
- dstat.bStatus = status;
- dstat.bState = dfu_state;
- dstat.iString = 0;
- udp_ep0_send_data((char *)&dstat, sizeof(dstat));
-}
-
-static void __dfufunc handle_getstate(void)
-{
- u_int8_t u8 = dfu_state;
- DEBUGE("getstate ");
- udp_ep0_send_data((char *)&u8, sizeof(u8));
-}
-
-/* callback function for DFU requests */
-int __dfufunc dfu_ep0_handler(u_int8_t req_type, u_int8_t req,
- u_int16_t val, u_int16_t len)
-{
- int rc;
-
- DEBUGE("old_state = %u ", dfu_state);
-
- switch (dfu_state) {
- case DFU_STATE_appIDLE:
- if (req != USB_REQ_DFU_DETACH)
- goto send_stall;
- dfu_state = DFU_STATE_appDETACH;
- goto send_zlp;
- break;
- case DFU_STATE_appDETACH:
- switch (req) {
- case USB_REQ_DFU_GETSTATUS:
- handle_getstatus();
- break;
- case USB_REQ_DFU_GETSTATE:
- handle_getstate();
- break;
- default:
- dfu_state = DFU_STATE_appIDLE;
- goto send_stall;
- break;
- }
- /* FIXME: implement timer to return to appIDLE */
- break;
- case DFU_STATE_dfuIDLE:
- switch (req) {
- case USB_REQ_DFU_DNLOAD:
- if (len == 0) {
- dfu_state = DFU_STATE_dfuERROR;
- goto send_stall;
- }
- handle_dnload(val, len);
- break;
- case USB_REQ_DFU_UPLOAD:
- ptr = 0;
- dfu_state = DFU_STATE_dfuUPLOAD_IDLE;
- handle_upload(val, len);
- break;
- case USB_REQ_DFU_ABORT:
- /* no zlp? */
- goto send_zlp;
- break;
- case USB_REQ_DFU_GETSTATUS:
- handle_getstatus();
- break;
- case USB_REQ_DFU_GETSTATE:
- handle_getstate();
- break;
- default:
- dfu_state = DFU_STATE_dfuERROR;
- goto send_stall;
- break;
- }
- break;
- case DFU_STATE_dfuDNLOAD_SYNC:
- switch (req) {
- case USB_REQ_DFU_GETSTATUS:
- handle_getstatus();
- /* FIXME: state transition depending on block completeness */
- break;
- case USB_REQ_DFU_GETSTATE:
- handle_getstate();
- break;
- default:
- dfu_state = DFU_STATE_dfuERROR;
- goto send_stall;
- }
- break;
- case DFU_STATE_dfuDNBUSY:
- dfu_state = DFU_STATE_dfuERROR;
- goto send_stall;
- break;
- case DFU_STATE_dfuDNLOAD_IDLE:
- switch (req) {
- case USB_REQ_DFU_DNLOAD:
- if (handle_dnload(val, len))
- /* FIXME: state transition */
- break;
- case USB_REQ_DFU_ABORT:
- dfu_state = DFU_STATE_dfuIDLE;
- goto send_zlp;
- break;
- case USB_REQ_DFU_GETSTATUS:
- handle_getstatus();
- break;
- case USB_REQ_DFU_GETSTATE:
- handle_getstate();
- break;
- default:
- dfu_state = DFU_STATE_dfuERROR;
- goto send_stall;
- break;
- }
- break;
- case DFU_STATE_dfuMANIFEST_SYNC:
- switch (req) {
- case USB_REQ_DFU_GETSTATUS:
- break;
- case USB_REQ_DFU_GETSTATE:
- handle_getstate();
- break;
- default:
- dfu_state = DFU_STATE_dfuERROR;
- goto send_stall;
- break;
- }
- break;
- case DFU_STATE_dfuMANIFEST:
- dfu_state = DFU_STATE_dfuERROR;
- goto send_stall;
- break;
- case DFU_STATE_dfuMANIFEST_WAIT_RST:
- /* we should never go here */
- break;
- case DFU_STATE_dfuUPLOAD_IDLE:
- switch (req) {
- case USB_REQ_DFU_UPLOAD:
- /* state transition if less data then requested */
- rc = handle_upload(val, len);
- if (rc >= 0 && rc < len)
- dfu_state = DFU_STATE_dfuIDLE;
- break;
- case USB_REQ_DFU_ABORT:
- dfu_state = DFU_STATE_dfuIDLE;
- /* no zlp? */
- goto send_zlp;
- break;
- case USB_REQ_DFU_GETSTATUS:
- handle_getstatus();
- break;
- case USB_REQ_DFU_GETSTATE:
- handle_getstate();
- break;
- default:
- dfu_state = DFU_STATE_dfuERROR;
- goto send_stall;
- break;
- }
- break;
- case DFU_STATE_dfuERROR:
- switch (req) {
- case USB_REQ_DFU_GETSTATUS:
- handle_getstatus();
- break;
- case USB_REQ_DFU_GETSTATE:
- handle_getstate();
- break;
- case USB_REQ_DFU_CLRSTATUS:
- dfu_state = DFU_STATE_dfuIDLE;
- /* no zlp? */
- goto send_zlp;
- break;
- default:
- dfu_state = DFU_STATE_dfuERROR;
- goto send_stall;
- break;
- }
- break;
- }
-
- DEBUGE("OK new_state = %u\r\n", dfu_state);
- return 0;
-
-send_stall:
- udp_ep0_send_stall();
- DEBUGE("STALL new_state = %u\r\n", dfu_state);
- return -EINVAL;
-
-send_zlp:
- udp_ep0_send_zlp();
- DEBUGE("ZLP new_state = %u\r\n", dfu_state);
- return 0;
-}
-static u_int8_t cur_config;
-
-/* USB DFU Device descriptor in DFU mode */
-__dfustruct const struct usb_device_descriptor dfu_dev_descriptor = {
- .bLength = USB_DT_DEVICE_SIZE,
- .bDescriptorType = USB_DT_DEVICE,
- .bcdUSB = 0x0100,
- .bDeviceClass = 0x00,
- .bDeviceSubClass = 0x00,
- .bDeviceProtocol = 0x00,
- .bMaxPacketSize0 = 8,
- .idVendor = OPENPCD_VENDOR_ID,
- .idProduct = OPENPCD_PRODUCT_ID,
- .bcdDevice = 0x0000,
- .iManufacturer = 0x00,
- .iProduct = 0x00,
- .iSerialNumber = 0x00,
- .bNumConfigurations = 0x01,
-};
-
-/* USB DFU Config descriptor in DFU mode */
-__dfustruct const struct _dfu_desc dfu_cfg_descriptor = {
- .ucfg = {
- .bLength = USB_DT_CONFIG_SIZE,
- .bDescriptorType = USB_DT_CONFIG,
- .wTotalLength = USB_DT_CONFIG_SIZE +
- 2* USB_DT_INTERFACE_SIZE +
- USB_DT_DFU_SIZE,
- .bNumInterfaces = 1,
- .bConfigurationValue = 1,
- .iConfiguration = 0,
- .bmAttributes = USB_CONFIG_ATT_ONE,
- .bMaxPower = 100,
- },
- .uif[0] = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = 0x00,
- .bAlternateSetting = 0x00,
- .bNumEndpoints = 0x00,
- .bInterfaceClass = 0xfe,
- .bInterfaceSubClass = 0x01,
- .bInterfaceProtocol = 0x02,
- .iInterface = 0,
- },
- .uif[1] = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = 0x00,
- .bAlternateSetting = 0x01,
- .bNumEndpoints = 0x00,
- .bInterfaceClass = 0xfe,
- .bInterfaceSubClass = 0x01,
- .bInterfaceProtocol = 0x02,
- .iInterface = 0,
- },
-
- .func_dfu = DFU_FUNC_DESC,
-};
-
-
-/* minimal USB EP0 handler in DFU mode */
-static __dfufunc void dfu_udp_ep0_handler(void)
-{
- AT91PS_UDP pUDP = AT91C_BASE_UDP;
- u_int8_t bmRequestType, bRequest;
- u_int16_t wValue, wIndex, wLength, wStatus;
- u_int32_t csr = pUDP->UDP_CSR[0];
-
- DEBUGE("CSR=0x%04x ", csr);
-
- if (csr & AT91C_UDP_STALLSENT) {
- DEBUGE("ACK_STALLSENT ");
- pUDP->UDP_CSR[0] = ~AT91C_UDP_STALLSENT;
- }
-
- if (csr & AT91C_UDP_RX_DATA_BK0) {
- DEBUGE("ACK_BANK0 ");
- pUDP->UDP_CSR[0] &= ~AT91C_UDP_RX_DATA_BK0;
- }
-
- if (!(csr & AT91C_UDP_RXSETUP)) {
- DEBUGE("no setup packet ");
- return;
- }
-
- DEBUGE("len=%d ", csr >> 16);
- if (csr >> 16 == 0) {
- DEBUGE("empty packet ");
- return;
- }
-
- bmRequestType = pUDP->UDP_FDR[0];
- bRequest = pUDP->UDP_FDR[0];
- wValue = (pUDP->UDP_FDR[0] & 0xFF);
- wValue |= (pUDP->UDP_FDR[0] << 8);
- wIndex = (pUDP->UDP_FDR[0] & 0xFF);
- wIndex |= (pUDP->UDP_FDR[0] << 8);
- wLength = (pUDP->UDP_FDR[0] & 0xFF);
- wLength |= (pUDP->UDP_FDR[0] << 8);
-
- DEBUGE("bmRequestType=0x%2x ", bmRequestType);
-
- if (bmRequestType & 0x80) {
- DEBUGE("DATA_IN=1 ");
- pUDP->UDP_CSR[0] |= AT91C_UDP_DIR;
- while (!(pUDP->UDP_CSR[0] & AT91C_UDP_DIR)) ;
- }
- pUDP->UDP_CSR[0] &= ~AT91C_UDP_RXSETUP;
- while ((pUDP->UDP_CSR[0] & AT91C_UDP_RXSETUP)) ;
-
- /* Handle supported standard device request Cf Table 9-3 in USB
- * speciication Rev 1.1 */
- switch ((bRequest << 8) | bmRequestType) {
- case STD_GET_DESCRIPTOR:
- DEBUGE("GET_DESCRIPTOR ");
- if (wValue == 0x100) {
- /* Return Device Descriptor */
- udp_ep0_send_data((const char *)
- &dfu_dev_descriptor,
- MIN(sizeof(dfu_dev_descriptor),
- wLength));
- } else if (wValue == 0x200) {
- /* Return Configuration Descriptor */
- udp_ep0_send_data((const char *)
- &dfu_cfg_descriptor,
- MIN(sizeof(dfu_cfg_descriptor),
- wLength));
-#if 0
- } else if (wValue == 0x400) {
- /* Return Interface descriptor */
- if (wIndex != 0x01)
- udp_ep0_send_stall();
- udp_ep0_send_data((const char *)
- &dfu_if_descriptor,
- MIN(sizeof(dfu_if_descriptor),
- wLength));
-#endif
- } else
- udp_ep0_send_stall();
- break;
- case STD_SET_ADDRESS:
- DEBUGE("SET_ADDRESS ");
- udp_ep0_send_zlp();
- pUDP->UDP_FADDR = (AT91C_UDP_FEN | wValue);
- pUDP->UDP_GLBSTATE = (wValue) ? AT91C_UDP_FADDEN : 0;
- break;
- case STD_SET_CONFIGURATION:
- DEBUGE("SET_CONFIG ");
- if (wValue)
- DEBUGE("VALUE!=0 ");
- cur_config = wValue;
- udp_ep0_send_zlp();
- pUDP->UDP_GLBSTATE =
- (wValue) ? AT91C_UDP_CONFG : AT91C_UDP_FADDEN;
- pUDP->UDP_CSR[1] =
- (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT) :
- 0;
- pUDP->UDP_CSR[2] =
- (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN) : 0;
- pUDP->UDP_CSR[3] =
- (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN) : 0;
- pUDP->UDP_IER = (AT91C_UDP_EPINT0|AT91C_UDP_EPINT1|
- AT91C_UDP_EPINT2|AT91C_UDP_EPINT3);
- break;
- case STD_GET_CONFIGURATION:
- DEBUGE("GET_CONFIG ");
- udp_ep0_send_data((char *)&(cur_config),
- sizeof(cur_config));
- break;
- case STD_GET_STATUS_ZERO:
- DEBUGE("GET_STATUS_ZERO ");
- wStatus = 0;
- udp_ep0_send_data((char *)&wStatus, sizeof(wStatus));
- break;
- case STD_GET_STATUS_INTERFACE:
- DEBUGE("GET_STATUS_INTERFACE ");
- wStatus = 0;
- udp_ep0_send_data((char *)&wStatus, sizeof(wStatus));
- break;
- case STD_GET_STATUS_ENDPOINT:
- DEBUGE("GET_STATUS_ENDPOINT(EPidx=%u) ", wIndex&0x0f);
- wStatus = 0;
- wIndex &= 0x0F;
- if ((pUDP->UDP_GLBSTATE & AT91C_UDP_CONFG) && (wIndex == 0)) {
- wStatus =
- (pUDP->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1;
- udp_ep0_send_data((char *)&wStatus,
- sizeof(wStatus));
- } else if ((pUDP->UDP_GLBSTATE & AT91C_UDP_FADDEN)
- && (wIndex == 0)) {
- wStatus =
- (pUDP->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1;
- udp_ep0_send_data((char *)&wStatus,
- sizeof(wStatus));
- } else
- udp_ep0_send_stall();
- break;
- case STD_SET_FEATURE_ZERO:
- DEBUGE("SET_FEATURE_ZERO ");
- udp_ep0_send_stall();
- break;
- case STD_SET_FEATURE_INTERFACE:
- DEBUGE("SET_FEATURE_INTERFACE ");
- udp_ep0_send_zlp();
- break;
- case STD_SET_FEATURE_ENDPOINT:
- DEBUGE("SET_FEATURE_ENDPOINT ");
- udp_ep0_send_stall();
- break;
- case STD_CLEAR_FEATURE_ZERO:
- DEBUGE("CLEAR_FEATURE_ZERO ");
- udp_ep0_send_stall();
- break;
- case STD_CLEAR_FEATURE_INTERFACE:
- DEBUGE("CLEAR_FEATURE_INTERFACE ");
- udp_ep0_send_zlp();
- break;
- case STD_CLEAR_FEATURE_ENDPOINT:
- DEBUGE("CLEAR_FEATURE_ENDPOINT(EPidx=%u) ", wIndex & 0x0f);
- udp_ep0_send_stall();
- break;
- case STD_SET_INTERFACE:
- DEBUGE("SET INTERFACE ");
- udp_ep0_send_stall();
- break;
- default:
- DEBUGE("DEFAULT(req=0x%02x, type=0x%02x) ", bRequest, bmRequestType);
- if ((bmRequestType & 0x3f) == USB_TYPE_DFU) {
- dfu_ep0_handler(bmRequestType, bRequest, wValue, wLength);
- } else
- udp_ep0_send_stall();
- break;
- }
-}
-
-/* minimal USB IRQ handler in DFU mode */
-static __dfufunc void dfu_udp_irq(void)
-{
- AT91PS_UDP pUDP = AT91C_BASE_UDP;
- AT91_REG isr = pUDP->UDP_ISR;
-
- if (isr & AT91C_UDP_ENDBUSRES) {
- pUDP->UDP_IER = AT91C_UDP_EPINT0;
- /* reset all endpoints */
- pUDP->UDP_RSTEP = (unsigned int)-1;
- pUDP->UDP_RSTEP = 0;
- /* Enable the function */
- pUDP->UDP_FADDR = AT91C_UDP_FEN;
- /* Configure endpoint 0 */
- pUDP->UDP_CSR[0] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL);
- cur_config = 0;
- }
-
- if (isr & AT91C_UDP_EPINT0)
- dfu_udp_ep0_handler();
-
- /* clear all interrupts */
- pUDP->UDP_ICR = isr;
-
- AT91F_AIC_ClearIt(AT91C_BASE_AIC, AT91C_ID_UDP);
-}
-
-/* this is only called once before DFU mode, no __dfufunc required */
-static void dfu_switch(void)
-{
- AT91PS_AIC pAic = AT91C_BASE_AIC;
-
- DEBUGE("Switching to DFU mode ");
-
- pAic->AIC_SVR[AT91C_ID_UDP] = (unsigned int) &dfu_udp_irq;
- dfu_state = DFU_STATE_dfuIDLE;
-}
-
-void __dfufunc dfu_main(void)
-{
- udp_init();
-
- /* This implements
- AT91F_AIC_ConfigureIt(AT91C_BASE_AIC, AT91C_ID_UDP,
- OPENPCD_IRQ_PRIO_UDP,
- AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL, dfu_udp_irq);
- */
- AT91PS_AIC pAic = AT91C_BASE_AIC;
- pAic->AIC_IDCR = 1 << AT91C_ID_UDP;
- pAic->AIC_SVR[AT91C_ID_UDP] = (unsigned int) &dfu_udp_irq;
- pAic->AIC_SMR[AT91C_ID_UDP] = AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL |
- OPENPCD_IRQ_PRIO_UDP;
- pAic->AIC_ICCR = 1 << AT91C_ID_UDP;
-
- AT91F_AIC_EnableIt(AT91C_BASE_AIC, AT91C_ID_UDP);
-
- /* End-of-Bus-Reset is always enabled */
-
- /* Clear for set the Pull up resistor */
- AT91F_PIO_SetOutput(AT91C_BASE_PIOA, OPENPCD_PIO_UDP_PUP);
-
- /* do nothing, since all of DFU is interrupt driven */
- while (1) ;
-}
-
-const struct dfuapi __dfufunctab dfu_api = {
- .ep0_send_data = &udp_ep0_send_data,
- .ep0_send_zlp = &udp_ep0_send_zlp,
- .ep0_send_stall = &udp_ep0_send_stall,
- .dfu_ep0_handler = &dfu_ep0_handler,
- .dfu_switch = &dfu_switch,
- .dfu_state = &dfu_state,
- .dfu_dev_descriptor = &dfu_dev_descriptor,
- .dfu_cfg_descriptor = &dfu_cfg_descriptor,
-};
-
-/* just for testing */
-int foo = 12345;
personal git repositories of Harald Welte. Your mileage may vary