diff options
Diffstat (limited to 'firmware/src/simtrace/spi_flash.c')
| -rw-r--r-- | firmware/src/simtrace/spi_flash.c | 64 |
1 files changed, 32 insertions, 32 deletions
diff --git a/firmware/src/simtrace/spi_flash.c b/firmware/src/simtrace/spi_flash.c index ffda1b2..10c6fa7 100644 --- a/firmware/src/simtrace/spi_flash.c +++ b/firmware/src/simtrace/spi_flash.c @@ -88,15 +88,15 @@ void spiflash_write_protect(int on) static __ramfunc void spi_irq(void) { - u_int32_t status = pSPI->SPI_SR; + uint32_t status = pSPI->SPI_SR; AT91F_AIC_ClearIt(AT91C_BASE_AIC, AT91C_ID_SPI); } -static const u_int8_t chipid_s25fl032p[3] = { 0x01, 0x02, 0x15 }; +static const uint8_t chipid_s25fl032p[3] = { 0x01, 0x02, 0x15 }; -static u_int8_t chip_id[3]; -static u_int32_t otp_supported; +static uint8_t chip_id[3]; +static uint32_t otp_supported; void spiflash_init(void) { @@ -141,13 +141,13 @@ void spiflash_init(void) otp_supported = 1; } -static int spi_transceive(const u_int8_t *tx_data, u_int16_t tx_len, - u_int8_t *rx_data, u_int16_t *rx_len, u_int16_t rx_skip) +static int spi_transceive(const uint8_t *tx_data, uint16_t tx_len, + uint8_t *rx_data, uint16_t *rx_len, uint16_t rx_skip) { - u_int16_t tx_cur = 0; - u_int16_t rx_len_max = 0; - u_int16_t rx_cnt = 0; - u_int8_t tmp; + uint16_t tx_cur = 0; + uint16_t rx_len_max = 0; + uint16_t rx_cnt = 0; + uint8_t tmp; DEBUGPSPI("spi_transceive: enter(tx_len=%u) ", tx_len); @@ -161,7 +161,7 @@ static int spi_transceive(const u_int8_t *tx_data, u_int16_t tx_len, //AT91F_SPI_Enable(pSPI); while (1) { - u_int32_t sr = pSPI->SPI_SR; + uint32_t sr = pSPI->SPI_SR; if (sr & AT91C_SPI_RDRF) { tmp = pSPI->SPI_RDR; rx_cnt++; @@ -199,11 +199,11 @@ static int spi_transceive(const u_int8_t *tx_data, u_int16_t tx_len, return 0; } -void spiflash_get_id(u_int8_t *id) +void spiflash_get_id(uint8_t *id) { - const u_int8_t tx_data[] = { SPIF_CMD_RDID, 0, 0, 0 }; - u_int8_t rx_data[] = { 0,0,0,0 }; - u_int16_t rx_len = sizeof(rx_data); + const uint8_t tx_data[] = { SPIF_CMD_RDID, 0, 0, 0 }; + uint8_t rx_data[] = { 0,0,0,0 }; + uint16_t rx_len = sizeof(rx_data); spi_transceive(tx_data, sizeof(tx_data), rx_data, &rx_len, 1); DEBUGPSPI("SPI ID: %02x %02x %02x\r\n", @@ -213,9 +213,9 @@ void spiflash_get_id(u_int8_t *id) int spiflash_read_status(void) { - const u_int8_t tx_data[] = { SPIF_CMD_RDSR, 0 }; - u_int8_t rx_data[1]; - u_int16_t rx_len = sizeof(rx_data); + const uint8_t tx_data[] = { SPIF_CMD_RDSR, 0 }; + uint8_t rx_data[1]; + uint16_t rx_len = sizeof(rx_data); spi_transceive(tx_data, sizeof(tx_data), rx_data, &rx_len, 1); @@ -226,14 +226,14 @@ int spiflash_read_status(void) void spiflash_clear_status(void) { - const u_int8_t tx_data[] = { SPIF_CMD_CLSR }; + const uint8_t tx_data[] = { SPIF_CMD_CLSR }; spi_transceive(tx_data, sizeof(tx_data), NULL, 0, 0); } int spiflash_write_enable(int enable) { - u_int8_t tx_data[1]; + uint8_t tx_data[1]; if (enable) tx_data[0] = SPIF_CMD_WREN; @@ -245,9 +245,9 @@ int spiflash_write_enable(int enable) return 0; } -int spiflash_otp_read(u_int32_t otp_addr, u_int8_t *out, u_int16_t rx_len) +int spiflash_otp_read(uint32_t otp_addr, uint8_t *out, uint16_t rx_len) { - u_int8_t tx_data[] = { SPIF_CMD_OTPR, 0, 0, 0, 0 }; + uint8_t tx_data[] = { SPIF_CMD_OTPR, 0, 0, 0, 0 }; if (!otp_supported) { DEBUGP("OTP not supported!\r\n"); @@ -269,9 +269,9 @@ int spiflash_otp_read(u_int32_t otp_addr, u_int8_t *out, u_int16_t rx_len) return rx_len; } -int spiflash_otp_write(u_int32_t otp_addr, u_int8_t data) +int spiflash_otp_write(uint32_t otp_addr, uint8_t data) { - u_int8_t tx_data[] = { SPIF_CMD_OTPP, 0, 0, 0, 0 }; + uint8_t tx_data[] = { SPIF_CMD_OTPP, 0, 0, 0, 0 }; if (!otp_supported) { DEBUGP("OTP not supported!\r\n"); @@ -293,7 +293,7 @@ int spiflash_otp_write(u_int32_t otp_addr, u_int8_t data) return 0; } -static int otp_region2addr(u_int8_t region) +static int otp_region2addr(uint8_t region) { /* see Figure 10.1 of S25FL032P data sheet */ if (region > 31 || region < 1) @@ -308,7 +308,7 @@ static int otp_region2addr(u_int8_t region) return 0x112; } -static int otp_region2bit(u_int8_t region) +static int otp_region2bit(uint8_t region) { /* see Figure 10.1 of S25FL032P data sheet */ if (region > 31 || region < 1) @@ -323,10 +323,10 @@ static int otp_region2bit(u_int8_t region) return region - 1; } -int spiflash_otp_get_lock(u_int8_t region) +int spiflash_otp_get_lock(uint8_t region) { - u_int32_t addr; - u_int8_t bit, data; + uint32_t addr; + uint8_t bit, data; if (region > 31 || region < 1) return -1; @@ -342,10 +342,10 @@ int spiflash_otp_get_lock(u_int8_t region) return 0; } -int spiflash_otp_set_lock(u_int8_t region) +int spiflash_otp_set_lock(uint8_t region) { - u_int32_t addr; - u_int8_t bit; + uint32_t addr; + uint8_t bit; if (region > 31 || region < 1) return -1; |